首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
Patterns in fault slip rates through time and space are examined across the transition from the Sierra Nevada to the Eastern California Shear Zone–Walker Lane belt. At each of four sites along the eastern Sierra Nevada frontal fault zone between 38 and 39° N latitude, geomorphic markers, such as glacial moraines and outwash terraces, are displaced by a suite of range-front normal faults. Using geomorphic mapping, surveying, and 10Be surface exposure dating, mean fault slip rates are defined, and by utilizing markers of different ages (generally, ~ 20 ka and ~ 150 ka), rates through time and interactions among multiple faults are examined over 104–105 year timescales.At each site for which data are available for the last ~ 150 ky, mean slip rates across the Sierra Nevada frontal fault zone have probably not varied by more than a factor of two over time spans equal to half of the total time interval (~ 20 ky and ~ 150 ky timescales): 0.3 ± 0.1 mm year? 1 (mode and 95% CI) at both Buckeye Creek in the Bridgeport basin and Sonora Junction; and 0.4 + 0.3/?0.1 mm year? 1 along the West Fork of the Carson River at Woodfords. Data permit rates that are relatively constant over the time scales examined. In contrast, slip rates are highly variable in space over the last ~ 20 ky. Slip rates decrease by a factor of 3–5 northward over a distance of ~ 20 km between the northern Mono Basin (1.3 + 0.6/?0.3 mm year? 1 at Lundy Canyon site) to the Bridgeport Basin (0.3 ± 0.1 mm year? 1). The 3-fold decrease in the slip rate on the Sierra Nevada frontal fault zone northward from Mono Basin is indicative of a change in the character of faulting north of the Mina Deflection as extension is transferred eastward onto normal faults between the Sierra Nevada and Walker Lane belt.A compilation of regional deformation rates reveals that the spatial pattern of extension rates changes along strike of the Eastern California Shear Zone-Walker Lane belt. South of the Mina Deflection, extension is accommodated within a diffuse zone of normal and oblique faults, with extension rates increasing northward on the Fish Lake Valley fault. Where faults of the Eastern California Shear Zone terminate northward into the Mina Deflection, extension rates increase northward along the Sierra Nevada frontal fault zone to ~ 0.7 mm year? 1 in northern Mono Basin. This spatial pattern suggests that extension is transferred from more easterly fault systems, e.g., Fish Lake Valley fault, and localized on the Sierra Nevada frontal fault zone as the Eastern California Shear Zone–Walker Lane belt faulting is transferred through the Mina Deflection.  相似文献   

2.
Reflection seismic data were acquired along a c. 23 km long profile over the Pärvie Fault system with a nominal receiver and source spacing of 20 m. An hydraulic breaking hammer was used as a source, generating signals with a penetration depth of about 5–6 km. Steeply dipping reflections from the end-glacial faults are observed, as well as sub-horizontal reflections. The location and orientation of the reflections from the faults agree well with surface geological observations of fault geometries. Reflections from a potential fourth end-glacial fault is observed further to the east along the profile. The more sub-horizontal reflections may originate from gabbroic bodies within the granitic basement or from deeper lying greenstones. Our results indicate that the end-glacial faults dip at moderate to steep dips down to at least 2–3 km depth, and possibly continue at this dip to depths of 6 km. This result has significant implications for determining the state of stress required to activate the faults in the past and in the future.  相似文献   

3.
Historical and active seismicity in the south-western Alps (France and Italy) shows the recurrence of relatively high-magnitude earthquakes (M ≥ 5.8), like the one that recently affected the Italian Apennine range (M = 6.3 on the 30th March 2009). However, up-to-date detailed mapping of the active fault network has been poorly established. The evaluation of seismological hazard in particular in the highly populated French and Italian coastal region cannot be done without this. Here, we present a detailed study of the main active fault system, based on geological observations along the south-western flank of the Alpine arc. This N140° right-lateral strike-slip active fault system runs along the edge of the Argentera-Mercantour range and can be followed down to the Mediterranean Sea. It is evidenced by (1) Holocene offsets of glacial geomorphology witnessing ongoing fault activity since 10 ka, (2) widespread recent (10–20 Ma) pseudotachylytes featuring long term activity of the faults, (3) active landslides along the main fault zone, (4) geothermal anomalies (hot springs) emerging in the active faults, (5) ongoing low-magnitude seismic activity and (6) localization of the main historical events. In the light of our investigations, we propose a new tectonic pattern for the active fault system in the south-western Alps.  相似文献   

4.
This study provides evidence for post-5 Ma shortening in the transition area between the Dinarides fold-and-thrust belt and the Pannonian Basin and reviews possible earthquake sources for the Banja Luka epicentral area (northern Bosnia and Herzegovina) where the strongest instrumentally recorded earthquake (ML 6.4) occurred on 27 October 1969. Geological, geomorphological and reflection seismic data provide evidence for a contractional reactivation of Late Palaeogene to Middle Miocene normal faults at slip rates below 0.1 mm/a. This reactivation postdates deposition of the youngest sediments in the Pannonian Basin of Pontian age (c. 5 Ma). Fault plane solutions for the main 1969 Banja Luka earthquake (ML 6.4) and its largest foreshock (ML 6.0) indicate reverse faulting along ESE–WNW-striking nodal planes and generally N–S trending pressure axes. The spatial distribution of epicentres and focal depths, analyses of the macroseismic field and fault-plane solutions for several smaller events suggest on-going shortening in the internal Dinarides. Seismic deformation of the upper crust is also associated with strike-slip faults, likely related to the NE–SW trending, sinistral Banja Luka fault. Possibly, this fault transfers contraction between adjacent segments of the Dinarides thrust system. The study area represents the seismically most active region of the Dinarides apart from the Adriatic Sea coast and the bend zone around Zagreb. We propose that on-going thrusting in the internal Dinarides thrust system takes up a portion of the current Adria–Europe convergence.  相似文献   

5.
There are two main ocean-ridge discontinuities in Iceland: the Tjörnes Fracture Zone (TFZ) and the South Iceland Seismic Zone (SISZ). The TFZ is a 120-km-long and as much as 70-km-wide WNW-trending zone of high seismicity. It has three main seismic lineaments: the Husavik-Flatey Fault (HFF), the Dalvik lineament, and the Grimsey lineament. The HFF, a dextral strike-slip fault and active as a transform fault for about 9 Ma, has a cumulative transform-parallel displacement of some 60 km. Offshore, the HFF is marked by a transform (fracture-zone) valley, 5–10 km wide and 3–4 km deep. Onshore the Flateyjarskagi Peninsula the HFF is marked by a 3–5-km-wide zone of intense crustal deformation with numerous strike-slip and normal faults, transform-parallel dykes, dense sets of mineral veins, and subzones of completely crushed rocks, that is, fault cores. Where the HFF comes on land on Tjörnes there is a similar, but much thinner, zone of crushed rocks. The seismic lineaments are located a few tens of kilometres south (Dalvik) and north (Grimsey) of, and run subparallel with, the HFF. Both lineaments are composed of sets of NNW-trending sinistral faults arranged en echelon.The SISZ is a 70-km-long and 10–20-km wide zone of almost continuous seismicity located between the overlapping West and East Volcanic Zones. It produces the largest earthquakes in Iceland, some of which exceed M7, during which the N–S width of the zone may be as great as 50–60 km. The SISZ is partly covered with Holocene lava flows where the seismogenic faults occur as dextral NNE-trending and sinistral ENE-trending conjugate arrays with push-ups between their nearby ends. The same fault-segment trends occur in the Pleistocene pile north of the Holocene lava flows.The HFF is neither perpendicular to the nearby ridge segments nor parallel with the spreading vector. As a consequence, the North Volcanic Zone has propagated to the north and the Kolbeinsey Ridge to the south during the past 1 Ma, resulting in the development of the Grimsey and Dalvik lineaments. Similarly, the tip of the East Volcanic Zone has been propagating rapidly to the southwest during the past 3 Ma. The tip has been at its present location for no more than several hundred thousand years, thus making the SISZ less stable than the HFF. If the propagation of the tip of the East Volcanic Zone continues, it will eventually reach the Reykjanes Ridge, whereby either the West or the East Volcanic Zone becomes extinct. Then the SISZ dies out as a major seismic zone.  相似文献   

6.
  相似文献   

7.
The Ganzi-Yushu-Xianshuihe Fault Zone (GYXFZ) is a typical active strike-slip fault that has triggered many large historic earthquakes, including the 2010 Mw 6.9 Yushu earthquake in the central Tibetan Plateau. This fault zone extends for ca. 800 km from the central Tibetan Plateau to its southeastern margin and varies in trend from WNW-ESE in the northwestern segment of the fault zone to NNW-SSE in the southeastern segment, having the geometry of an arc projecting northeastwards. In this study, we present evidence for the systematical sinistral deflection and/or offset of the Yangtze River and its branch stream channels and valleys along the GYXFZ. Topographic analysis of three-dimensional (3D) perspective images constructed using digital elevation model (DEM) data, 0.5 m-resolution WorldView and GeoEye images, and 15 m-resolution Landsat-Enhanced Thematic Mapper (ETM+) images, together with analysis of geological structures, reveals the following: (i) the main river channels and valleys of the Yangtze River drainage system show systematic sinistral deflections and/or offsets along the GYXFZ; (ii) various amounts of sinistral offset have accumulated on the tributary stream channels, valleys, and gullies of the Yangtze River along the fault, with a linear relation, D = aL, between the upstream length L from the deflected point and the offset amount D with a certain coefficient a; (iii) the maximum amount of sinistral offset is up to ca. 60 km, which was accumulated in the past 13–5 Ma; and (iv) the long-term average strike-slip rate is ca. 4.6–12 mm/year. Geological and geomorphic evidence, combined with geophysical data, demonstrates that the GYXFZ is currently active as one of the major seismogenic faults in the Tibetan Plateau, dominated by left-lateral strike-slip motion. Our findings supply important evidence for the tectonic evolution of strike-slip faults in the Tibetan Plateau since the Eurasia-India continental collision.  相似文献   

8.
The microseismicity of the southeastern-most Zagros is examined by high-resolution data recorded by a temporary dense local seismic network. The seismicity defines a diffuse pattern, mostly located beneath folds in the southern part of the High Zagros Fault (HZF). Seismicity dips gently northward in the depth range 6–25 km, implying slip on a major intracrustal thrust fault extending to the north of the Main Zagros Reverse Fault (MZRF) which seems to connect to the Mountain Frontal Fault (MFF). Furthermore, observed focal mechanisms suggest transpressive motion on the HZF located west of the Zendan-Minab-Palami (ZMP) fault system and striking obliquely to the convergent motion. These observations suggest that the transition zone between the Zagros continental collision zone and the Makran oceanic subduction zone is not confined to the east of the ZMP and some part of the this diffuse transition is accommodated north of the Hormuz Strait in the west by partitioning between strike-slip and shortening components. The Zagros reverse domain is terminated by a transpressive tectonic regime. Moho depth beneath the MZRF, deduced from receiver functions, is almost 45 km thinner than is observed in the central and northern parts of the Zagros. These observations support a model of active underthrusting of the Arabian plate beneath central Iran in the southeastern-most Zagros.  相似文献   

9.
We have combined tensor radio magnetotelluric- (RMT, 15–250 kHz) and controlled source tensor magnetotelluric (CSTMT, 1–12 kHz) data for the mapping of aquifers in gravel formations lying in between crystalline bedrock and clay rich sediments in the Heby area some 40 km west of Uppsala in Sweden. The estimated transfer functions, the impedance tensor and the tipper vector generally satisfy 1D or 2D necessary conditions except for the lowest CSTMT frequencies where near field effects become more dominant.The data measured from 8 profiles were inverted with the Rebocc code of Siripunvaraporn and Egbert (2000) assuming plane wave conditions. This meant that only 12 frequencies in the range of 4–180 kHz could be used. The four lowest frequencies of CSTMT in the range of 1–2.8 kHz were excluded because of source effects. Data from all profiles were inverted with a starting model of 100 Ω-m and a relative error floor of 0.02 on apparent resistivity, corresponding to less than 1° on phase. Tipper vectors are generally small except when source effects become dominant in the lowest frequencies of CSTMT and were therefore not used for inversion. Comparing with models derived from vertical electrical soundings, refraction and reflection seismic data as well as ground truth from exploration wells assessed the reliability of the deep part of the models. Furthermore we carried out a non-linear resolution analysis to better quantify the depth extent of the aquifers.The inverted models from the Heby area show well the thickness variations of glacial deposits overlying crystalline bedrock. Generally, the upper 20 m of the models have resistivities below 40 Ω-m, taken to represent clay rich formations. Below the clay layer resistivities increase to about 40–400 Ω-m, interpreted to represent sand/gravel formations with a maximum thickness of about 40 m and a width of several hundred metres. This is a potential aquifer that extends in approximately N–S direction for some kilometres.  相似文献   

10.
The 1939 Erzincan Earthquake (M = 7.8), occurred on the North Anatolian Fault Zone (NAFZ), was one of the most active strike-slip faults in the world, and created a 360-km-long surface rupture. Traces of this surface rupture are still prominently observed. In the absence of detailed mapping to resolve the fault characteristics, detailed observations have been conducted at 20 different points on the 70-km-long Kelkit Valley Segment (KVS) of the NAFZ's between Niksar and Koyulhisar. Field data defining fault character and slip amounts were found at eight points and show right-lateral slip varying between 1.8 and 4.25 m and the vertical slip varying between 0.5 and 2.0 m.The KVS developed in the most morphologically prominent and narrowest part of the NAFZ. Therefore, the chances of finding evidence of more than one historical earthquake in trenches opened to investigate palaeoseismological aspects are higher. Faults observed in foundation and channel excavations opened for energy purposes in the Reşadiye region show this clearly and evidence for up to four seismic events including the 1939 Erzincan Earthquake have been discovered. Further studies are required to discover whether right-lateral deformation on at some locations on this segment is surface ruptures associated with the 1939 earthquake or later creep.  相似文献   

11.
The Loncopué Trough is located in the hinterland Andean zone between 36°30′ and 39°S. It constitutes a topographic low bounded by normal faults and filled by lavas and sediments less than 5 Ma old. Reprocessed seismic lines show wedge-like depocenters up to 1700 m deep associated with high-angle faults, correlated with the 27–17 Ma Cura Mallín basin deposits, and buried beneath Pliocene to Quaternary successions and Late Miocene foreland sequences. The southern Central Andes seem to have been under extension in the hinterland zone some 27 Ma ago and again at approximately 5 Ma ago. This last extensional period could have been the product of slab steepening after a shallow subduction cycle in the area, although other alternatives are discussed. Orogenic wedge topography, altered by the first extensional stage in the area, was recovered through Late Miocene inversion, and was associated with foreland sequences. However, since the last extension (<5 Ma) the Andes have not recovered their characteristic contractional behavior that controlled past orogenic growth.  相似文献   

12.
Where they are preserved, landforms that have been truncated and offset by past fault movements provide potentially valuable quantitative data that can be used to estimate slip rates. At such locations, it is important to investigate the fault zone in sufficient detail to understand how displacements are accommodated on individual fault strands. At a site along a northern section of the Alpine fault zone on the South Island of New Zealand, surface mapping of a series of faulted river terraces and channels has revealed a complicated and poorly understood paleoearthquake history. We have acquired high-resolution 2- and 3-D ground-penetrating radar (GPR) data over a large area (~ 500 × 500 m) of the terraces to map along-strike changes in shallow (<20 m) fault zone morphology. By identifying distinct reflection patterns within the topographically migrated 3-D GPR volumes and extrapolating them to the longer and more widely spaced GPR profiles, we determined the subsurface extent of two main structural/depositional facies that were juxtaposed by three left-stepping en-echelon fault strands. Two regions of warped strata are interpreted to result from transpressive folding between the overlapping strands, where displacement is transferred from one fault to the next. We suggest that diffuse deformation between the overlapping fault tips results in anomalously low estimates for horizontal and vertical fault displacements of some geomorphic features.  相似文献   

13.
The Kachchh province of Western India is a major seismic domain in an intraplate set-up. This seismic zone is located in a rift basin, which was developed during the early Jurassic break-up of the Gondwanaland. The crustal strain determined from the GPS velocity data of post-seismic time period following the 2001 Bhuj earthquake indicates a maximum strain rate of ∼266 × 10−9 per year along N013°. Focal mechanism solutions of the main event of 26 January 2001 and the aftershocks show that the maximum principal stress axis is close to this high strain direction. Maximum shear strain rate determined from the GPS data of the area has similar orientation. The unusually high strain rate is comparable in magnitude to the continental rift systems. The partitioning of the regional NE–SW horizontal stress (SHmax) by the pre-existing EW-striking boundary fault developed the strike–slip components parallel to the regional faults, the normal components perpendicular to the faults, NE-striking conjugate Riedel shear fractures and tension fractures. The partitioned normal component of the stress is considered to be the major cause for compression across the regional EW faults and development of the second-order conjugate shear fractures striking NE–SW and NW–SE. The NE-striking transverse faults parallel to the anti-Riedel shear planes have become critical under these conditions. These anti-Riedel planes are interpreted to be critical for the seismicity of the Kachchh region. The high strain rate in this area of low to moderate surface heat flow is responsible for deeper position of the brittle–ductile transition and development of deep seated seismic events in this intraplate region.  相似文献   

14.
Northeastern Brazil has experienced earthquake swarms, which include events up to mb = 5.2 in the last 30 years. Ground-rupturing events, however, have not been reported in the last 200 years. We have used a multidisciplinary approach to describe the geometry, kinematics, age, paleostress field, and paleoseismological significance of ground ruptures filled by clastic sediments in the region. Methods included GIS- and remote sensing-assisted structural mapping, borehole and resistivity sounding, grain size and X-ray analysis, and Optically Stimulated Luminescence (OSL) and Single-Aliquot Regenerative-Dose (SAR) chronology. Sediment-filled faults concentrate on the hanging wall of the Jundiaí fault, a 35 km long, NE-trending, late Cretaceous to Quaternary fault. These sediment-filled faults cut across Precambrian granites and overlying alluvial and colluvial deposits and exhibit steeply planar geometry. The largest faults exhibit sediment fills that extend downward to at least 20 m. The faults alternate between normal and right-oblique normal slip, which allowed the gravitational influx of unlithified gravels to gravelly sediments into the granites. Field evidence indicates seismogenic origin associated with multistage opening and infilling. On the basis of OSL and SAR chronology, we distinguish six generations of infills, which represent the main periods of fault activity: 8.0–9.0, 11.0–15.0, 16.0–24.0, 37.0–45.5, 65.0–67.9, and 84.5–93.5 ka. These dates suggest a 15.8 ka recurrence period. A few OSL dates may represent maximum ages due to poor bleaching of sediments, which implies that the recurrence period may be underestimated. We conclude that the Jundiaí fault has been continuously active in respect of surface-rupturing during at least the last ～100 ka. The size of the surface ruptures is consistent with earthquake magnitude M ～ 5.3, close to magnitudes observed in northeastern Brazil in the short instrumental and historical record. We suggest that seismogenic-fault recurrence in intraplate settings is longer than human settlement and should be assessed by multidisciplinary methods, mainly those that provide subsurface data and chronology of clastic sediments. Faults that trap sediments during movements are ideal places for these studies. The structures we describe here may have analogs in both modern and ancient intraplate settings.  相似文献   

15.
We invert measurements of coseismic displacements from 139 continuously recorded GPS sites from the 2010, Jiashian, Taiwan earthquake to solve for fault geometry and slip distribution using an elastic uniform stress drop inversion. The earthquake occurred at a depth of ~ 23 km in an area between the Western Foothills fold-and-thrust belt and the crystalline high mountains of the Central Range, providing an opportunity to examine the deep fault structure under Taiwan. The inferred rupture plane is oblique to the prominent orientation of thrust faults and parallel to several previously recognized NW-striking transfer zones that appear to connect stepping thrusts. We find that a fault striking 318°–344° with dip of 26°–41° fits the observations well with oblique reverse-sinistral slip under a low stress drop of about 0.5 MPa. The derived geodetic moment of 2.92 × 1018 N-m is equivalent to a Mw = 6.24 earthquake. Coseismic slip is largely concentrated within a circular patch with a 10-km radius at the depth between 10 and 24 km and maximum slip of 190 mm. We suggest this earthquake ruptured the NW-striking Chishan transfer fault zone, which we interpret as a listric NE-dipping lateral ramp with oblique slip connecting stepping thrust faults (ramps). The inferred slip on the lateral ramp is considerably deeper than the 7–15 km deep detachment identified in previous studies of western Taiwan. We infer an active basal detachment under western Taiwan at a depth of at least ~ 20–23 km based on these inversion results. The earthquake may have nucleated at the base of the lateral ramp near the intersection with the basal detachment. Coulomb stress change calculations suggest that this earthquake moved several NE-striking active thrust faults in western Taiwan nearer to failure.  相似文献   

16.
汶川地震断裂带东北端浅部结构的人工地震探测   总被引：2，自引：1，他引：1       下载免费PDF全文
结合汶川地震断裂带动态监测,利用快速响应探测系统,开展了断层带浅部结构人工地震探测.针对地震断裂带动态监测条件下的复杂波场和低信噪比的情况,在f-k波场分离的基础上,分别利用了折射波共中心点成像、面波速度反演、反射波叠加成像方法,进行了浅层断层和构造成像处理,并对处理结果进行了综合解释,给出了断裂带浅部断层分布和速度特征.为汶川地震龙门山断裂带东北端动态监测提供了基础结构信息,所发展的断裂带快速响应探测技术对于地震应急动态监测具有重要意义.  相似文献   

17.
The Narmada–Son Lineament (NSL) Zone is the second most important tectonic feature after Himalayas, in the Indian geology. Magnetotelluric (MT) studies were carried out in the NSL zone along a 130 km long NNE-SSW trending profile. The area of investigation extends from Edlabad (20°46′16″; 75°59′05″) in the South to Khandwa (21°53′51″; 76°18′05″) in the North. The data shows in general the validity of a two-dimensional (2D) approach. Besides providing details on the shallow crustal section, the 2D modeling results resolved four high conductive zones extending from the middle to deep crust, spatially coinciding with the major structural features in the area namely the Gavligarh, Tapti, Barwani-Sukta and Narmada South faults. The model for the shallow section has brought out a moderately resistive layer (30–150 Ω m) representing the exposed Deccan trap layer, overlying a conductive layer (10–30 Ω m) inferred to be the subtrappean Gondwana sediments, the latter resting on a high resistive basement/upper crust. The Deccan trap thickness varies from around a few hundred meters to as much as 1.5 km along the traverse. A subtrappean sedimentary basin like feature is delineated in the northern half of the traverse where a sudden thickening of subtrappean sediments amounting to as much as 2 km is noticed. The high resistive upper crust is relatively thick towards the southern end and tends to become thinner towards the middle and northern part of the traverse. The lower crustal segment is conductive over a major part of the profile. Considering the generally enhanced heat flow values in the NSL region, coupled with characteristic gravity highs and enhanced seismic velocities coinciding with the mid to lower crustal conductors delineated from MT, presence of zones of high density mafic bodies/intrusives with fluids, presumably associated with magmatic underplating of the crust in the zone of major tectonic faults in NSL region are inferred.  相似文献   

18.
We analyzed records of eight seismic stations of the autonomous broadband seismograph network of a joint project between Utrecht University (the Netherlands), California Institute of Technology, and Centro de Investigación Científica y de Estudios Superiores de Ensenada (CICESE). These stations recorded the Mw 5.6 earthquake that occurred on 12 November 2003 at Salsipuedes basin in the middle of the Gulf of California 2 km west of the island Angel de la Guarda. This event was located at 29.16º N and 113.37º W, 30 km northeast of Bahia de los Angeles. A foreshock and hundreds of aftershocks were recorded in the 48 hours after its origin time. With the location of 29 earthquakes we identified the active segment, perpendicular to the main transform fault NW–SE of Canal de Ballenas, representing the transtensional boundary between the Pacific and North American plates. The direction of the active fault described is consistent with the normal fault mechanism reported by the National Earthquake Information Center (strike=39º, dip=34º, slip=–44º).From the duration magnitude of 456 aftershocks, we calculated a b-value of 1.14±0.28; furthermore, we calculated a seismic moment of (3.5 ±3.3) X1017Nm, a source radius of 3.7 ± 2.63 km, and a static stress drop of 3.94 ± 1.15 MPa (39.4 ± 11.5 bar.).  相似文献   

19.
The Tan-Lu fault zone is the largest active tectonic zone in eastern China, with a complex history of formation and evolution, and it has a very important control effect on the regional structure, magmatic activity, the formation and distribution of mineral resources and modern seismic activity in eastern China. Xinyi City has a very important position as a segmental node in the Shandong and Suwan sections of the Tan-Lu fault zone. Predecessors have conducted research on the spatial distribution, occurrence and activity characteristics of the shallow crustal faults in the Suqian section of the Tan-Lu belt, and have obtained some new scientific understandings and results. However, due to different research objectives or limitations of research methods, previous researches have either focused on the deep crustal structure, or targeted on the Suqian section or other regions. However, the structural style and deep-shallow structural association characteristics of Xinyi section of Tan-Lu belt have not been well illustrated, nor its activity and spatial distribution have been systematically studied. In order to investigate the shallow crustal structure features, the fault activities, the spatial distribution and the relationship between deep and shallow structures of the Xinyi section of the Tan-Lu Fault, we used a method combining mid-deep/shallow seismic reflection exploration and first-break wave imaging. Firstly, a mid-deep seismic reflection profile with a length of 33km and a coverage number greater than 30 was completed in the south of Xinyi City. At the same time, using the first arrival wave on the common shot record, the tomographic study of the shallow crust structure was carried out. Secondly, three shallow seismic reflection profiles and one refraction tomography profile with high resolution across faults were presented. The results show that the Xinyi section of Tan-Lu fault zone is a fault zone composed of five concealed main faults, with a structural pattern of “two grabens sandwiched by a barrier”. The five main faults reveal more clearly the structural style of “one base between two cuts” of the Tan-Lu fault zone. From west to east, the distribution is as follows: on the west side, there are two high-angle faults, F4 and F3, with a slot-shaped fault block falling in the middle, forming the western graben. In the middle, F3 and F2, two normal faults with opposite dip directions, are bounded and the middle discontinuity disk rises relatively to form a barrier. On the east side, F2 and F1, two conjugate high-angle faults, constitute the eastern graben. The mid-deep and shallow seismic reflection profiles indicate that the main faults of the Xinyi section of Tan-Lu fault zone have a consistent upper-lower relationship and obvious Quaternary activities, which play a significant role in controlling the characteristics of graben-barrier structure and thickness of Cenozoic strata. The shape of the reflective interface of the stratum and the characteristics of the shallow part of the fault revealed by shallow seismic reflection profiles are clear. The Mohe-Lingcheng Fault, Xinyi-Xindian Fault, Malingshan-Chonggangshan Fault and Shanzuokou-Sihong Fault not only broke the top surface of the bedrock, but also are hidden active faults since Quaternary, especially the Malingshan-Chonggangshan Fault which shows strong activity characteristics of Holocene. The results of this paper provide a seismological basis for an in-depth understanding of the deep dynamics process of Xinyi City and its surrounding areas, and for studying the deep-shallow tectonic association and its activity in the the Xinyi section of the Tan-Lu Fault.  相似文献   

20.
The Al Hoceima Mw 6.4 earthquake of 24 February 2004 that occurred in the eastern Rif region of Morocco already hit by a large event in May 1994 (Mw 5.9) has been followed by numerous aftershocks in the months following the event. The aftershock sequence has been monitored by a temporary network of 17 autonomous seismic stations during 15 days (28 March–10 April) in addition to 5 permanent stations of the Moroccan seismic network (CNRST, SPG, Rabat). This network allowed locating accurately about 650 aftershocks that are aligned in two directions, about N10-20E and N110-120E, in rough agreement with the two nodal planes of the focal mechanism (Harvard). The aftershock alignments are long enough, about 20 km or more, to correspond both to the main rupture plane. To further constrain the source of the earthquake main shock and aftershocks (mb > 3.5) have been relocated thanks to regional seismic data from Morocco and Spain. While the main shock is located at the intersection of the aftershock clouds, most of the aftershocks are aligned along the N10-20E direction. This direction together with normal sinistral slip implied by the focal mechanism is similar with the direction and mechanisms of active faults in the region, particularly the N10E Trougout oblique normal fault. Indeed, the Al Hoceima region is dominated by an approximate ENE-SSW direction of extension, with oblique normal faults. Three major 10–30 km-long faults, oriented NNE-SSW to NW-SE are particularly clear in the morphology, the Ajdir and Trougout faults, west and east of the Al Hoceima basin, respectively, and the NS Rouadi fault 20 km to the west. These faults show clear evidence of recent vertical displacements during the late Quaternary such as uplifted alluvial terraces along Oued Rihs, offset fan surfaces by the Rouadi fault and also uplifted and tilted abandoned marine terraces on both sides of the Al Hoceima bay.However, the N20E direction is in contrast with seismic sources identified from geodetic inversions, which favour but not exclusively the N110-120E rupture directions, suggesting that the 1994 and 2004 events occurred on conjugate faults. In any event, the recent seismicity is thus concentrated on sinistral N10-20E or N110-120E dextral strike-slip faults, which surface expressions remain hidden below the 3–5 km-thick Rif nappes, as shown by the tomographic images build from the aftershock sequence and the concentration of the seismicity below 3 km. These observations may suggest that strain decoupling between the thrusted cover and the underlying bedrock and highlights the difficulty to determine the source properties of moderate events with blind faults even in the case of good quality recorded data.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号