首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
To understand the deformation mechanism and seismic anisotropy in the uppermost mantle beneath Spitsbergen, Svalbard, in the Arctic, the deformation microstructures of olivine in the peridotite of Spitsbergen were studied. Seismic anisotropy in the upper mantle can be explained mainly by the lattice-preferred orientation (LPO) of olivine. The LPOs of the olivine in the peridotites were determined using electron backscattered diffraction patterns. Eight specimens out of 10 showed that the [100] axis of the olivine was aligned subparallel to the lineation and that the (010) plane was subparallel to the foliation, showing a type A LPO. In the other two specimens the [100] axis of olivine was aligned subparallel to the lineation and both the [010] and [001] axes were distributed in a girdle nearly perpendicular to the lineation, showing a type D LPO. The dislocation density of the olivine in the samples showing a type D LPO was higher than that in the samples showing a type A LPO. The result of an Fourier transformation infrared study showed that both the types A and D samples were dry. These observations were in good agreement with a previous experimental study ( Tectonophysics , 421 , 2006, 1 ): samples showing a type D LPO for olivine were observed at a high stress condition and samples showing both types A and D LPO were deformed under dry condition. Observations of both strong LPOs and dislocations of olivine indicate that the peridotites studied were deformed by dislocation creep. The seismic anisotropy calculated from the LPOs of the olivine could be used to explain the seismic anisotropy of P - and S -waves in the lithospheric mantle beneath Spitsbergen, Svalbard.  相似文献   

2.
Chlorite peridotites from Almklovdalen in southwest Norway were studied to understand the deformation processes and seismic anisotropy in the upper mantle. The lattice preferred orientation (LPO) of olivine and chlorite was determined using electron backscattered diffraction (EBSD)/scanning electron microscopy. A sample with abundant garnet showed [100] axes of olivine aligned sub-parallel to lineation, and [010] axes aligned subnormal to foliation: A-type LPO. Samples rich in chlorite showed different olivine LPOs. Two samples showed [001] axes aligned sub-parallel to lineation, and [010] axes aligned subnormal to foliation: B-type LPO. Two other samples showed [100] axes aligned sub-parallel to lineation, and [001] axes aligned subnormal to foliation: E-type LPO. Chlorite showed a strong LPO characterized by [001] axes aligned subnormal to foliation with a weak girdle subnormal to lineation. Fourier transform infrared (FTIR) spectroscopy of the specimens revealed that the olivines with A-type LPO contain a small amount (170 ppm H/Si) of water. In contrast, the olivines with B-type LPOs contain a large amount (340 ppm H/Si) of water.

The seismic anisotropy of the olivine and chlorite was calculated. Olivine showed Vp anisotropy of up to 3.8% and a maximum Vs anisotropy of up to 2.7%. However, the chlorite showed a much stronger Vp anisotropy, up to 21.1%, and a maximum Vs anisotropy of up to 31.7%. A sample with a mixture of 25% of olivine and 75% of chlorite can produce a Vp anisotropy of 14.2% and a maximum Vs anisotropy of 22.9%. Because chlorite has a wide stability field at high pressure and high temperature in the subduction zone, the strong LPO of chlorite can be a source of the observed trench-normal or trench-parallel seismic anisotropy in the mantle wedge as well as in subducting slabs depending on the dipping angle of slab in a subduction zone where chlorite is stable.  相似文献   

3.
Effect of water and stress on the lattice-preferred orientation of olivine   总被引：6，自引：1，他引：5  
The influence of water and stress on the lattice-preferred orientation (LPO) of olivine aggregates was investigated through large strain, shear deformation experiments at high pressures and temperatures (P = 0.5–2.1 GPa, T = 1470–1570 K) under both water-poor and water-rich conditions. The specimens are hot-pressed synthetic olivine aggregates or single crystals of olivine. Water was supplied to the sample by decomposition of a mixture of talc and brucite. Deformation experiments were conducted up to γ (shear strain)  6 using the Griggs apparatus where water fugacity was up to  13 GPa at the pressure of 2 GPa. The water content in olivine saturated with water increases with increasing pressure and the solubility of water in olivine at P = 0.5–2 GPa was  400–1200 ppm H/Si. Several new types of LPO in olivine are found depending on water content and stress. Samples deformed in water-poor conditions show a conventional LPO of olivine where the olivine [100] axis is subparallel to the shear direction, the (010) plane subparallel to the shear plane (type-A). However, we identified three new types (type-B, C, and E) of LPO of olivine depending on the water content and stress. The type-B LPO of olivine which was found at relatively high stress and/or under moderate to high water content conditions is characterized by the olivine [001] axis subparallel to the shear direction, the (010) plane subparallel to the shear plane. The type-C LPO which was found at low stress and under water-rich conditions is characterized by the olivine [001] axis subparallel to the shear direction, the (100) plane subparallel to the shear plane. The type-E LPO which was found under low stress and moderate water content is characterized by the olivine [100] axis subparallel to the shear direction, the (001) plane subparallel to the shear plane. Observations by transmission electron microscopy (TEM) and scanning electron microscopy (SEM) show that the dislocations in water-poor samples (type-A) are curved and both b =  [100] and b = [001] dislocations have a similar population. Numerous subgrains are seen in water-poor samples in backscattered electron images. In contrast, water-rich samples (both type-B and type-C) contain mostly b = [001] dislocations and dislocations are straight and sub-grain boundaries are rare compared to those in water-poor samples. These observations suggest that (1) dominant slip systems in olivine change with water fugacity (and stress) and (2) grain boundary migration is enhanced in the presence of water. Seismic anisotropy corresponding to the fabrics under water-rich condition is significantly different from that under water-poor condition. Consequently, the relationship between seismic anisotropy and flow geometry in water-rich regions is expected to be different from that in water-poor regions in which type-A fabric dominates (i.e., the lithosphere). A few cases are discussed including anisotropy in the subduction zone and in the deep upper mantle.  相似文献   

4.
Automated electron backscattered diffraction (EBSD) was applied using a scanning electron microscope to obtain lattice preferred orientation (LPO) data for olivine in garnet peridotites of the Central Alps. As a reference frame, the LPOs of enstatite were also investigated. In the garnet peridotite at Cima di Gagnone (CDG), a weak foliation carrying a distinct lineation is present. The lineation is characterized by elongated enstatite, olivine and poikiloblastic garnet. Olivine shows a very unusual LPO with [100] normal to foliation and [001] parallel to lineation. Achsenverteilungsanalyse (AVA) maps demonstrate that [001] of olivine grains corresponds quite well to their maximum length axes which are preferentially parallel to the lineation. Numerous planar hydrous defects within (001) planes of olivine are marked by palisades of ilmenite rods and show a preferred orientation normal to lineation. Calculated P-wave velocities for CDG are fastest (8.32 km sу) normal to foliation with a relatively low anisotropy (2.9%). Compared to mantle peridotites with the usual (010)[100] LPO where the fastest Vp direction is towards the lineation, the relationship between flow geometry and seismic anisotropy is significantly different at CDG. Several mechanisms for the formation of the LPO type at CDG are considered, with glide possible on (100)[001] of olivine. On the basis of field data as well as petrographic and petrologic evidence, it has been demonstrated that the CDG garnet peridotite formed by prograde metamorphism from a hydrous protolith at pressures and temperatures of about 3.0 GPa and 750 °C, respectively. The CDG LPO is interpreted to have formed during hydrous subduction zone metamorphism. The same interpretation may hold for the previously investigated olivine LPO at Alpe Arami, which is similar to that at the nearby CDG. The observed anomalous LPO is no proof for ultradeep (>3.0 GPa) conditions.  相似文献   

5.
Lattice-preferred orientations (LPO) of olivine, diopside, enstatite and garnet from the Zhimafang garnet peridotite body in the Sulu ultrahigh-pressure (UHP) metamorphic terrane (China) were measured using the electron backscatter diffraction (EBSD) technique. The peridotite was captured from a mantle wedge immediately adjacent the subducted Yangtze slab and then experienced the UHP metamorphism at 750–950 °C and 4–7 GPa. The olivine LPO is characterized by the [001] axis close to the stretching lineation and the (100) plane subparallel to the foliation, indicating the prevailing of (100) [001] slip. Enstatite LPO displays the dominance of (100) [001] slip. Diopside developed complex LPO patterns that are difficult to explain using a single slip system of (100) [001]. Garnet is almost randomly oriented due to its low volume fractions, cubic symmetry and the presence of numerous slip systems. Calculated seismic properties of the peridotite yield a maximum P-wave velocity normal to the foliation and a minimum along the foliation, with anisotropy up to 8% in strongly sheared samples. The S-wave velocity pattern is complex but the fast polarization plane generally normal to the foliation. The inferred shear sense from the olivine LPO is top-to-SE, in contrary to exhumation-induced top-to-NW thrusting recorded in the quartz LPO, implying that the olivine LPO formed at early UHP metamorphic conditions. The olivine crystals have relatively low water contents (141–475 H/106 Si), indicating a fluid-deficient environment for the LPO formation. The present study suggests that a combination of low temperature and UHP plays a much more important role than the water content to promote the activation of (100) [001] slip in olivine.  相似文献   

6.
The Shanwang and Qixia basalts lie within the North China block and were erupted in Miocene to Pliocene time (18.1 to 4.3 Ma) and Pliocene time (6.4 to 5.9 Ma), respectively. The Shanwang area lies astride the Tancheng-Lujiang (Tanlu) fault zone, a major lithospheric fault, whereas the Qixia area lies east of the fault zone. The basaltic rocks (alkali olivine basalts, basanites, nephelinites) carry abundant deep-seated xenoliths including spinel lherzolite (dominant), dunite, and pyroxenite, and a megacryst suite including augite, anorthoclase, phlogopite, ilmenite, and garnet. Xenoliths with coarse-grained microstructures are common in the Qixia xenolith suite, but are absent in Shanwang. Reconstructed bulk compositions of the lherzolites range from relatively depleted (<3% modal diopside) to fertile (>12% modal diopside). Equilibration temperatures of 850° to 1020°C indicate entrainment of these lherzolites from depths ≤45 km, within the lithosphere; the geotherm may have been higher beneath Shanwang. The Shanwang suite contains less-depleted lherzolites, and more pyroxenites, than the Qixia suite. The chondrite-normalized REE patterns in clinopyroxenes of the Shandong xenoliths vary from LREE depleted, through concave shaped, to LREE enriched; spidergrams for the clinopyroxenes can be divided into depleted, fertile, and metasomatic types. Progressive depletion in Na and Al is accompanied by depletion in moderately incompatible elements such as Y, Yb, and Zr, and an increase in Mg#. Ti and Zr in clinopyroxenes have not been affected by the metasomatic process, and MREE have been little disturbed, whereas the light rare-earth elements, Nb, and Sr have been strongly enriched during metasomatism; this suggests that carbonate-rich fluids/melts were the metasomatic agent. The mantle beneath the Shandong Peninsula sampled by these basalts is dominantly Phanerozoic in character rather than Archean or Proterozoic lithospheric mantle. This mantle probably represents a mixture of older lithospheric mantle and newly accreted material that replaced the Archean lithospheric keel through extension, thermal erosion, and fluid/melt metasomatism. The differences in micro-structures, chemistry, temperature, and fluid/melt activity between Shanwang and Qixia are ascribed to their spatial relationships to the Tanlu fault, which is a major translithospheric suture that hasplayed an important role in the Cenozoic replacement of the pre-existing Archean lithospheric mantle.  相似文献   

7.
上地幔地震的各向异性主要归因于橄榄石的优选方位,不同的橄榄石优选方位模式可以作为上地幔不同动力学作用的指示剂。不同应力和含水量条件下的高温变形实验已经确定出五类橄榄石组构模式(“A”型、“B”型、“C”型、“D”型和“E”型)。本文运用电子背散射(EBSD)技术对来自苏鲁超高压变质带南部的芝麻房石榴石橄榄岩的橄榄石进行了优选方位测定,不同变形程度的橄榄石均显示了[100]轴近垂直于面理和[001]轴近平行于线理的特征,为“C”类组构模式,可见组构类型与变形程度没有关系,并且橄榄石组构所显示的NW向SE的剪切指向,与围岩-正、副片麻岩中形成于折返过程的石英优选方位所显示的SE向NW的剪切指向完全不同,说明芝麻房石榴石橄榄岩中橄榄石的“C”类组构是折返前形成的。结合橄榄石结构水的测量和已有的芝麻房石榴石橄榄岩形成的温压条件,推测该组构形成于含水俯冲带中,认为芝麻房石榴石橄榄岩的原岩来自于高含水的上部地幔楔碎块,与俯冲的陆壳物质一起经历了超高压变质作用并最终折返至地表。  相似文献   

8.
Seismic anisotropy in the upper mantle provides important constraints on mantle dynamics, continental evolution and global tectonics and is believed to be produced by the flow-induced lattice-preferred orientation (LPO) of olivine. Recent experimental studies at high pressure and temperature have suggested that the LPO of olivine is affected by pressure in addition to water and stress. However, there has been no report yet for the pressure-induced LPO of natural olivine because samples from the deep upper mantle are rare and often unsuitable for study due to ambiguous foliation and lineation. Here we show evidence of the pressure-induced LPO of natural olivine in diamond-bearing garnet peridotites from Finsch, South Africa. We found that the [010] axes of olivine are aligned subnormal to foliation and that the [001] axes are aligned subparallel to lineation, which is known as B-type LPO of olivine. The equilibrium pressure of the samples, as estimated using geobarometer, was greater than 4 GPa, indicating that the samples originated from a depth greater than ∼120 km. In addition, FTIR spectroscopy of the olivine showed that the samples are dry, with a water content of less than 90 ± 20 ppm H/Si (5.5 ± 1.2 ppm wt. H2O). These data suggest that the samples are the first natural examples of olivine displaying B-type LPOs produced due to high pressure under dry condition. Our data indicate that the trench-parallel seismic anisotropy observed in many subduction zones in and below subducting slabs at depths greater than ∼90 km under dry condition may be attributed to the pressure-induced olivine fabrics (B-type LPO) and may be interpreted as the entrainment of the sub-lithospheric mantle in the direction of subduction rather than anomalous trench-parallel flow.  相似文献   

9.
. The effect of crystal anisotropy on wetting angles of equilibrium silicate melts on crystal faces of spinel, diopside, enstatite and olivine has been determined experimentally by the sessile melt drop technique. The anisotropy, ÃgSL{\rm \~A}\gamma _{{\rm SL}} , of solid-liquid interfacial energies (%SL(max)-%SL(min)) can be related to the wetting angles, N, by ÃgSL μ | cosy(max)  - cosy(min) | = Pw( [(A)\tilde]gSL ){\rm \~A}\gamma _{{\rm SL}} \propto \left| {\cos \psi (\max )\; - \cos \psi (\min )} \right| = Pw_{\left( {{\rm \tilde A}\gamma _{{\rm SL}} } \right)} . Normalising to the smallest wetting angle gives values of Pw for diopside=0.0728, olivine=0.0574, orthopyroxene=0.0152, and spinel=0.0075. Crystal anisotropy influences grain-scale morphology of small-degree partial melts, permeability and the melt connectivity threshold, JC. Results show that, at sufficient melt fractions, diopside should increase permeability in a peridotitic matrix, whereas enstatite should lower it. Despite its low anisotropy, spinel contributes positively to permeability and JC because of its high surface energies. These results suggest that harzburgitic mineral matrices typical of the subcratonic mantle should impede the movement of low-degree partial melts, whereas melts should flow more easily through spinel lherzolites.  相似文献   

10.
The 5158-m-deep main borehole of the Chinese Continental Scientific Drilling Project (CCSD-MH) penetrated granitic gneisses, paragneisses, eclogites, retrograde eclogites, amphibolites and ultramafic rocks in the Sulu ultrahigh-pressure (UHP) metamorphic terrane, eastern China. The CCSD-MH consists of four petro-structural units separated by three SE-dipping ductile shear zones DFa (835-1280 m), DFb (2010-2280 m) and DFc (2920-3225 m), which are correspondent with the regional shear zones in the northern Sulu UHP supracrustal zone. Using the electron backscatter diffraction (EBSD) technique, we investigated the lattice-preferred orientations (LPOs) of omphacite, diopside and quartz in core samples from the CCSD-MH. Omphacite from eclogites and diopside from garnet pyroxenites display very strong LPOs, which are characterized by the maximum concentration of [001]-axes parallel to the lineation and (010)-poles normal to the foliation. Quartz in para- and granitic mylonites/gneisses from the shear zones DFa, DFb and DFc developed multiple slip systems. 40Ar/39Ar dating of biotite in para- and granitic gneisses from the CCSD-MH yields 223-202 Ma, which constrains the formation ages of the quartz high-temperature prism slip systems {m}<a> and {m}[c]. The asymmetric LPOs of omphacite, diopside, olivine and quartz with respect to the structural frame reveal three deformation phases in the Sulu terrane. In the Middle Triassic, the northward subduction of the Yangtze plate to depths > 100 km produced a top-to-the-south shear sense in LPOs of omphacite, diopside and olivine, and a nearly N-S-striking foliation and a subhorizontal N-S-trending lineation in eclogites and ultramafic rocks. In the Late Triassic, the UHP rocks were exhumed to the lower crust and quartz developed high-temperature slip systems with a top-to-the-NW shear sense, which is consistent with the regional SE-dipping foliation and SE-plunging lineation in the ductile shear zones. In the Cretaceous the UHP rocks were exhumed to the middle crust when the migmatization and granitic intrusion formed a NE-striking antiform structure. As a result, the activation of quartz low-temperature basal slip (0001)<a> is characterized by a top-to-the-SE shear sense in the south, but a top-to-the-NW shear sense in the north.  相似文献   

11.
中国大陆科学钻探(CCSD)680-1200米区段发育了多个韧性剪切带,带中主要岩石类型包括片麻岩和超高压榴辉岩。片麻岩中的变形石英、面理化榴辉岩中的拉长石榴石和绿辉石的应变轴比都表现为X>Y>Z,Flinn系数分别为0.11-0.27、0.22-0.23和0.23-0.24。随着糜棱岩化作用的增强,变形石英的C轴组构由Z轴极密逐渐向Y轴极密和叶理面上的大圆环带转变。在常温常压下测试了样品的波速,计算出片麻岩Vp和Vs的各向异性分别为30.17％-60.97％和11.52％-35.79％,榴辉岩Vp和Vs的各向异性分别为0.17％-11.19％和2.41％-6.70％。影响各向异性的主要因素有岩石的结构构造、矿物的晶格优选方位(LPO)、形态优选方位(SPO)和定向微裂隙。随着糜棱岩化作用的增强,岩石的P波各向异性逐 渐升高。变形岩石中的黑云母、石英、绿辉石的LPO和SPO是地震波各向异性的主要控制因素。饱水后的片麻岩样品的P波各向异性明显低于干燥片麻岩样品。在东海钻井中的强反射带主要是由于不同岩层之间的波阻抗差异而造成的,榴辉岩/强退变榴辉岩和黑云斜长片麻岩之间的接触界面会产生较强的地震深反射。此外,与LPO相关的地震波各向异性会增强地震波的反射,所以韧性剪切带中的糜棱岩化片麻岩可能是地震反射的良好载体。韧性剪切带中岩石弹性波速度的强各向  相似文献   

12.
We conduct shear wave splitting measurements on waveform data from the Hi-net and the broadband F-net seismic stations in Kanto and SW Japan generated by shallow and intermediate-depth earthquakes occurring in the subducting Philippine Sea and Pacific slabs. We obtain 1115 shear wave splitting parameter pairs. The results are divided into those from the shallow (depth < 50 km) and the deep (depth > 50 km) events. The deep events beneath Kanto are further divided into PHS1 and PHS2 (upper and lower planes of the double seismic zone in the Philippine Sea slab, respectively), PAC1 and PAC2 (western and eastern Pacific slab, respectively) events. The results from the shallow events represent the crustal anisotropy, and their fast directions are more or less aligned in the σHmax directions, implying that the anisotropy is produced by the alignment of the vertical cracks in the crust induced by the compressive stresses. In Kanto, Kii Peninsula and Kyushu regions, the results from the deep events suggest a contribution from the mantle wedge anisotropy. Events from all groups beneath Kanto show NW, NE and EW fast directions. This complex pattern seems to be produced by the corner flows induced by both the WNW PAC plate subduction and the oblique NNW PHS slab subduction with the associated olivine lattice-preferred orientations (LPOs), and the anisotropy frozen in the PHS slab. The deep events beneath Kii Peninsula show NE and NW fast directions and may be produced by the corner flow produced by the NNW PHS slab subduction with the associated olivine LPOs. The NE directions might also be produced by the segregated melts in the thin layers parallel to the PHS slab subduction. The deep events beneath N Kyushu show NNW fast directions, which may result from the southeastward flow in the upper mantle inferred from the stresses in the upper plate. Results from the deep events beneath middle-south Kyushu show dominantly E–W fast directions, in both the fore- and back-arcs. They may be produced by the corner flow of the westward PHS slab subduction with the olivine LPOs. Because the source regions with multiple fast directions are not resolved in this study, further detailed analyses of shear wave splitting are necessary for a better understanding of the stress state, the induced mantle flow, and the melt-segregation processes.  相似文献   

13.
Silicate-oxide symplectites in complex mineral intergrowths are relatively common in upper mantle xenoliths and in xenoliths in the Jagersfontein Kimberlite, South Africa.Harzburgites of olivine and high-Al (1.9–3.6 wt%), Ca (0.6–0.9 wt%) and Cr (0.3–0.9 wt%) enstatite contain symplectites of spinel and diopside, or spinel, diopside and lower-Al (0.8–2.2 wt%), Ca (0.1–0.4 wt%) and Cr (0.02–0.8 wt%) enstatite. From textures and mineral chemistries these symplectites are interpreted to have formed by mineral unmixing and migration from Al–Ca–Cr discrete enstatite to adjoining mineral interfaces.Garnet harzburgites are composed of large (0.5–1 cm) olivine, equally large discrete low-Al (0.6–1.1 wt%), Ca (0.1–0.5 wt%), and Cr (0.1–0.3 wt%) enstatite and smaller interstitial garnet, diopside, and high-Cr and low-Al spinel. Symplectites are composed of either spinel+diopside+garnet, or garnet+spinel. Spinel diopside garnet symplectites have cores of spinel+diopside, resembling symplectites inharzburgites, but surrounded by rims of garnet or garnet+undigested globular spinel. From textures and chemistries we suggest that the spinel+diopside cores formed from Ca-Al-Cr-rich orthopyroxene initially as a nonstoichiometric homogeneous single phase clinopyroxene enriched in Fe, Cr and Al. This was followed by decomposition of the clinopyroxene to diopside+spinel, and subsequent garnet formation in a prograde reaction with olivine or enstatite. In bothharzburgites andgarnet harzburgites the metastable cellular structures may also have formed by the simultaneous precipitation of pyroxene and spinel. In all cases there is a strongly preferred embayment of symplectite bodies into olivine. Olivine appears to have activated adjacent  相似文献   

14.
大别山碧溪岭和山东荣成分别发育壳源和幔源的石榴二辉橄榄岩。它们在扬子板块向华北板块的俯冲过程中与俯冲板片一起经历了超高压变质作用。这两种原岩来源不同的石榴橄榄岩中的橄榄石具有相似的结晶学优选方位(LPO):[100]轴主板密垂直于面理面,[010]轴主极密平行于线理,这种橄榄石结晶学优选方位明显不同于高温地幔橄榄岩包体中的橄榄石组构,也不同于最近在超高压变质地体中发现的水导致的橄榄石组构。我们认为碧溪岭和荣成石榴二辉橄榄岩中的这种橄榄石组构可能是在相对较干的超高压变质条件下形成的。本研究为大陆深俯冲超高压变质石榴橄榄岩橄榄石组构特征提供了第一手资料。  相似文献   

15.
The effect of alumina and water solubility on the development of fabric in orthopyroxene in response to simple shear deformation has been investigated at a pressure of 1.5 GPa and a temperature of 1,100 °C using the D-DIA apparatus. The microstructure observations at these conditions indicate that dislocation glide is the dominant deformation mechanism. In MgSiO3 enstatite and hydrous aluminous enstatite, partial dislocations bounding the stacking faults in [001] glide parallel to the (100) (or) the (100) [001] slip system. Electron backscattered diffraction analysis of anhydrous aluminous enstatite, however, indicates operation of the (010) [001] slip system, and microstructure analysis indicates dislocation movement involving [001] on both (100) and {210} planes. The strong covalent bonding induced by the occupation of M1 and T2 sites by Al could have restricted the glide on (100), activating slip on {210}. The resulting seismic anisotropies (~2 %) in orthopyroxene are weaker compared to olivine (~9.5 %), and reduced anisotropy can be expected if orthopyroxene coexists with olivine. Weak anisotropy observed in stable cratonic regions can be explained by the relatively high abundance of orthopyroxene in these rocks.  相似文献   

16.
Mantle xenoliths (lherzolites, clinopyroxene dunites, wehrlites, and clinopyroxenites) in the Early Cretaceous volcanic rocks of Makhtesh Ramon (alkali olivine basalts, basanites, and nephelinites) represent metasomatized mantle, which served as a source of basaltic melts. The xenoliths bear signs of partial melting and previous metasomatic transformations. The latter include the replacement of orthopyroxene by clinopyroxene in the lherzolites and, respectively, the wide development of wehrlites and olivine clinopyoroxenites. Metasomatic alteration of the peridotites is accompanied by a sharp decrease in Mg, Cr, and Ni, and increase of Ti, Al, Ca contents and 3+Fe/2+Fe ratio, as well as the growth of trace V, Sc, Zr, Nb, and Y contents. The compositional features of the rocks such as the growth of 3+Fe/2+Fe and the wide development of Ti-magnetite in combination with the complete absence of sulfides indicate the high oxygen fugacity during metasomatism and the low sulfur concentration, which is a distinctive signature of fluid mode during formation of the Makhtesh Ramon alkali basaltic magma. Partial melting of peridotites and clinopyroxenites is accompanied by the formation of basanite or alkali basaltic melt. Clino- and orthopyroxenes are subjected to melting. The crystallization products of melt preserved in the mantle rock are localized in the interstices and consist mainly of fine-grained clinopyroxene, which together with Ti-magnetite, ilmenite, amphibole, rhenite, feldspar, and nepheline, is cemented by glass corresponding to quartz–orthopyroxene, olivine–orthopyroxene, quartz–feldspar, or nepheline–feldspar mixtures of the corresponding normative minerals. The mineral assemblages of xenoliths correspond to high temperatures. The high-Al and high-Ti clinopyroxene, calcium olivine, feldspar, and feldspathoids, amphibole, Ti-magnetite, and ilmenite are formed at 900–1000°. The study of melt and fluid inclusions in minerals from xenoliths indicate liquidus temperatures of 1200–1250°C, solidus temperatures of 1000–1100°C, and pressure of 5.9–9.5 kbar. Based on the amphibole–plagioclase barometer, amphibole and coexisting plagioclase were crystallized in clinopyroxenites at 6.5–7.0 kbar.  相似文献   

17.
Central Italy is an active tectonic area that has been recently studied by several regional mantle, Pn and SKS, studies which revealed the presence of a strong regional anisotropy. In this paper, we present the first petrophysical results on the only mantle xenoliths from Central Italy, which place new constraints on the upper mantle structures of this region. The Torre Alfina mantle xenoliths are very small in size, from few millimetres to about 1.5 cm. They are mainly dunites and harzburgites, with subordinate lherzolites and wehrlites. Since olivine and spinel are always present, they should have crystallised in the spinel-bearing lherzolite field. Their mineralogical composition is ol+spl±opx±cpx. Both olivines and pyroxenes are present as porphyroclasts and as neoblasts. The xenoliths show different degrees of recrystallization. Geothermobarometry on these xenoliths give a temperature range of 1040±40 °C and a pressure estimate of about 1.5 GPa, corresponding to 50 to 60 km depth. Previous seismic studies have estimated the Moho to be at 20 to 25 km in this region, hence the xenoliths come from a hot mantle, probably asthenospheric, below a lithosphere of about 25 to 40 km in thickness below the Moho. We measure the crystallographic preferred orientation (CPO) of olivines and pyroxenes using a SEM and the Electron Back Scattered Diffraction (EBSD) technique. The CPO shows all three axes of olivine are tightly clustered: [100] axis is typically more tightly clustered than [010] and [001] is the most widely distributed axis. The fabric strength expressed by the integral J index, varies from 4.5 to 25.9, and decreases with the degree of recrystallization. We use CPO data to calculate anisotropic seismic properties of the xenoliths. They are very homogenous and probably statistically representative of the mantle below the Torre Alfina area. Vp ranges from 8.4 to 9.1 km/s, Vs1 from 4.8 to 5.0 km/s. The seismic anisotropy is more variable; AVp ranges from 9.8% to 19.3% and AVs from 7.3% to 13.4%. The majority of the xenoliths display an orthorhombic seismic symmetry, but xenoliths with a transverse isotropic behaviour have also been observed.

We consider four geodynamic models for the source region of the xenoliths (extension, shear, upwelling, slab tilted), defined by different orientations of the structural reference frame, and we calculated for each model the variation of the seismic properties with temperature, pressure and volume fraction of orthopyroxene. After comparing this variation of calculated seismic parameters with seismic observations from the region, we form the hypothesis that the xenoliths come from either an extensional tectonic zone (lineation X and foliation plane XY horizontal) or transcurrent shear zone (lineation X horizontal and foliation plane XY vertical) and that the mantle beneath Torre Alfina is composed by 70% olivine and 30% orthopyroxene forming an anisotropic layer of about 160 or 110 km in thickness, respectively.  相似文献   


18.
J.B. Dawson   《Lithos》2004,77(1-4):553-569
Porphyroclastic enstatite in a garnet lherzolite xenolith from the Monastery Mine kimberlite, South Africa, has exsolved pyrope garnet, Cr-diopside and Al-chromite, and the specimen is interpreted as representing a transition from fertile harzburgite, (containing high Ca-Al-Cr enstatite) to granular garnet lherzolite. Although the exsolved phases occur in morphologically different forms (fine and coarse lamellae; equant, ripened grains), indicating textural disequilibrium, the exsolved grains are very constant in composition, indicating chemical equilibrium. Theoretically, the exsolution could have been due to a fall in temperature, but the close association of exsolution and deformation of the host enstatite suggests that exsolution was also aided by straining of the enstatite lattice. The phase compositions can be broadly matched with those in other mantle peridotites, except that all phases are characterised by a virtual absence of Ti. In the garnet and diopside Ti, Co, Zr and most of the REE are lower than in published analyses of garnet and diopside in both granular and sheared garnet lherzolites from Southern African kimberlites, and diopside/garnet partitioning for Sr and the REE is higher. Comparison with the trace element chemistry of an enstatite from a fertile harzburgite indicates that, except for Nb, the trace element content and distribution found in the Monastery phases could arise by isochemical exsolution from such an enstatite. On the assumption that (a) the Monastery specimen represents a transition from harzburgite to garnet lherzolite, and (b) many garnet lherzolites are of exsolution origin (as suggested by their modal compositions), the inference is that most garnet lherzolites, and not just the sheared variety, have been subject to varying degrees of Ti, Zr, Sr and REE metasomatism.  相似文献   

19.
华北克拉通上地幔变形及其动力学意义   总被引：1，自引：0，他引：1       下载免费PDF全文
赵亮  郑天愉 《地质科学》2009,44(3):865-876
华北克拉通从稳定到破坏的演化过程对有关地球动力学的经典理论提出了挑战,研究其独特的演化历史是固体地球科学研究的一项重要内容。上地幔矿物晶体的各向异性记录了上地幔发生构造变形的信息,研究上地幔地震波各向异性能够揭示现今和构造历史时期所发生的构造运动。本文总结了近年来作者在华北克拉通地区所进行的高密度、覆盖广泛的地震波横波分裂观测研究结果。横波分裂的快轴方向与绝对板块运动方向的不一致,以及横波分裂参数快速的空间变化特征表明了华北克拉通的SKS横波分裂主要反映上地幔的变形。观测结果表明：鄂尔多斯块体保留了克拉通较弱的各向异性特征,其西端体现了元古代克拉通拼合的变形特征; 中新生代华北克拉通破坏事件以不同的机制主导了华北克拉通中部和东部的上地幔变形,在东部地区北西-南东向的拉张应力作用使得快轴方向平行于拉张方向,而在中部则因受到较厚岩石圈的阻挡使得地幔流动改变了方向,因此造成了北东和北北东向的岩石圈拉张。  相似文献   

20.
Olivine, low-Ca pyroxene, diopside, and spinel from a suite of protogranular lherzolite xenoliths from southeastern Australia have been analysed for their major and trace element compositions using electron microprobe and laser ablation ICPMS. Bulk compositions of the lherzolites range from fertile (12–13% modal diopside) to depleted (2–3% modal diopside), with equilibration temperatures of 850–900 °C indicating entrainment of these lherzolites from relatively shallow depths (probably ≤ 35 km) within the lithosphere. Mineral compositions and abundances indicate a primary control by partial melting, with decreasing abundance of modal diopside accompanied by increasing Mg# of olivine and pyroxene, decreasing Al and Ti contents of diopside, increasing Ni contents of olivine, and increasing Cr/Al of spinel. HREE, Y, and Ga in diopside also follow melting trends, decreasing in concentration with increasing Mg#. In contrast, highly incompatible elements such as LREE, Nb, and Th reveal divergent behaviour that cannot be ascribed entirely to partial melting. Diopsides from the fertile lherzolites have mantle-normalized patterns that are depleted in Th, Nb, and the LREE relative to Y and the HREE, whereas, diopsides from the cpx-poor samples are strongly enriched in Th, Nb and the LREE, and have elevated Sm/Hf and Zr/Hf, and low Ti/Nb. All diopsides have strongly negative Nb anomalies relative to Th and the LREE. Trace element patterns of diopside in the fertile lherzolites can be reproduced by ≤ 5% batch melting of a primitive source. The negative Nb anomalies are a consequence of this melting, and do not require special conditions or tectonic environments. The low concentrations of Y and HREE in diopside from the cpx-poor lherzolites cannot be produced by realistic degrees of batch melting, but can be accomplished by up to ∼20% fractional melting, suggesting multiple episodes of melt depletion. Os isotopic compositions of these lherzolites show that the melt depletion events occurred in the middle and late Proterozoic, demonstrating the long-term stability of lithospheric mantle beneath regions of eastern Australia. The LREE-enriched diopsides are well equilibrated and record metasomatic enrichment events that pre-date the magmatism that entrained these xenoliths. Trace element patterns of these pyroxenes suggest a carbonatitic melt as the metasomatic agent. Received: 24 September 1996 / Accepted: 12 August 1997  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号