首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
The necessity of eliminating debris from a granite quarry has awakened an interest in applications of by-products, called “marginal arids”, in different fields, like construction and foundations for roadways, restoration, material for the manufacture of artificial rocks, and artesian products etc. Conclusions obtained from the results of tests carried out by X-ray diffraction of granite quarry by-products in Extremadura, Spain, submitted to different treatments, are established. Test pieces from two quarries are analyzed and compared generally and specifically, for commercial use. Finally, conclusions relating to essays in test pieces and mineral dynamics of marginal arid granite are exposed.  相似文献   

2.
A geological survey carried out in the Yaoundé (Cameroon) region has revealed the presence of homogeneous clayey laterite in the upper part of a laterite cover on interfluves, thickest on hills (780–800 m altitude) where ferricrete is absent, and clayey heterogeneous hydromorphic material in valleys. We present in this paper the physical, mineralogical and geochemical properties of these occurrences and discuss their potential as raw material for pottery, manufacture of bricks and tiles. These clayey raw materials are mostly made up of fine particles (ranging from 55 to 60% clay + silt in the clayey laterite, more than 70% clay + silt in the clayey hydromorphic material). Their chemical composition is characterized by silica (<60% SiO2), alumina (<35% Al2O3) and iron (ranging from 3 to 14% Fe2O3). Their main clay minerals are disorganized and poorly crystallized kaolinites. The average limits of liquidity (44.56% versus 91.58%) and limits of plasticity (22.4 versus 45.93) revealed that clayey hydromorphic material has the greatest plasticity. The studied raw materials are suitable for making pottery as well as the manufacture of bricks and tiles. However, the high iron content in the clayey laterite (between 11 and 12% Fe2O3) prevents their efficient use in the manufacture of ceramics.  相似文献   

3.
The main objective of this work is the generalization of lithostratigraphic, biostratigraphic and isotopic-geochronological data characterizing carbonate rocks from type succession of the broadly acknowledged chronostratigraphic subdivision of the Lower Riphean, such as the Burzyan Group of the Southern Urals and its analogs. Using an original approach to investigation of the Rb-Sr and Pb-Pb isotopic systems in carbonates and strict criteria of their retentivity, we studied the least altered (“best”) samples of the Burzyan carbonates, which retain the 87Sr/86Sr ratio of the sedimentation environment. As long ago as 1550 ± 30 and 1430 ± 30 Ma, that ratio corresponded to 0.70460–0.70480 and 0.70456–0.70481. The results confirm the influx of the mantle material predominantly into the World Ocean of the Early Riphean. The influence of meteoric diagenesis was likely responsible for local declines of δ18O in the Burzyan carbonates down to the values of −2.5 to −1.5‰ V-PDB. In the “best” samples, this parameter ranges from −0.7 to 0‰, which is consistent with the assumption that δ18O values (0 ± 1‰) characterized the stasis of the carbonate carbon isotopic composition in oceanic water 2.06–1.25 Ga ago. C-isotopic data on carbonate from the Paleoproterozoic-Lower Riphean boundary formations of the Urals, India, North America and Siberia suggest that the mentioned stasis ended by the commencement of the Early Riphean ca. 1.6–1.5 Ga ago. In the least altered carbonates of the Early Riphean, the δ18O variation range corresponds to 4.0–4.5‰.  相似文献   

4.
In suture zones of the Urals, geological and physical-chemical conditions for formation of large ore and nonmetalliferous deposits existed during each geodynamical environment of development of the Urals. The development was predetermined by the duration and discontinuous-continuous existence of these structures, and the latter promoted the development of polygenetic and polychronic pegmatites of various types (by depth and productivity) and other postmagmatites. It has been shown in the example of the Ufalei metamorphic block that pegmatites of different ages (from R2 to P) are often spatially combined. In this paper, two age diagrams are presented: the first one is for geological events that took place in the Ufalei metamorphic block; the second one is for Vendian pegmatites in it. The value of this paper is determined by the fact that the data obtained in Ufalei block could be used for study of postmagmatites within its analogs, which are gneissic-amphibolitic complexes of the Northern Urals, and especially by the fact that the project “Polar Urals, Industrial Urals” is implemented there.  相似文献   

5.
The Dachang antimony deposit in Qinglong,Guizhou Province,is strictly controlled by the “Dachang Layer” which is a complex altered rock occurring at unconformity between the Permian Emeishan basalt and the Maokou limestone.Based on the studies of the hanging-and foot-wall rocks,the trace elements and REE contents of the rocks and ores and heavy placer minerals in the basalt,this paper is focused on the relations between these data and the “Dachang Layer”and its hanging- and oot-wall rocks.The author pointed out that the “Dachang Layer” and basalt are the source-beds of antimony;ilmenite and magnetite are the major mineral carriers of antimony.In the processes of halmyrosis and burial metamorphism of the “Dachang Layer” an basalt,antimony was mobilized along with the mobilization of iron and was preliminarily concentrated in the“ Dachang Layer”.  相似文献   

6.
Based on the LA-ICP-MS data, detrital zircons from the tillite-type conglomerates of the Tanin Formation (Serebryanka Group) on the western slope of the Central Urals include approximately equal proportions of crystals with Neoarchean and Paleoproterozoic U-Pb ages. Therefore, we can assume that crystalline rocks of the basement beneath the eastern part of the East European Craton served as a provenance for aluminosilicate clastics in the initial Serebryanka period. Detrital zircons from sandstones of the Kernos Formation have the Meso-Neoarchean (∼15%), Paleoproterozoic (∼60%), and Mesoproterozoic (∼26%) age. Comparison of the obtained data with the results of the study of detrital zircons from Riphean and Vendian sandstones of the Southern Urals shows that the Riphean and Lower Vendian rocks are mainly represented by erosional products of Middle and Upper Paleoproterozoic crystalline rocks that constitute the basement of the East European Craton. In addition, a notable role belonged to older (Lower Proterozoic, Neoarchean and Mesoarchean) rock associations during the formation of the Serebryanka Group. The terminal Serebryanka time (Kernos Age) differed from its initial stage (Tanin Age) by the appearance of Mesoproterozoic complexes in provenances. According to available data, these complexes played an insignificant role in the formation of Riphean-Vendian rocks in the neighboring South Uralian segment. This implies a spatiotemporal diversity of clastic material sources for Upper Precambrian rocks in the western megazone of the Southern and Central Urals.  相似文献   

7.
8.
Based on recent publications and our long-standing investigations, the most reasonable ways were proposed to obtain the manganiferous raw material for the Uralian metallurgic industry, which lost the traditional raw base (Ukrainian and Georgian deposits) after the USSR breakdown. The Urals is region is perspective for the discovery of two types of manganese deposits. (1) Insignificantly metamorphosed siliceous–carbonate ores with silica modulus MSi (i.e., MnO : SiO2) ranging from 1 to 2 and manganese content of 17–20%. The most promising are the areas with different-age, mainly carbonate rocks in the Urals (Northern and Polar) and Pai-Khoi regions. (2) Oxide, mainly pyrolusite–psylomelane ores with Mn content of 30–35% in the Meso–Cenozoic manganese hats developed in the Paleozoic manganiferous (volcanogenic–siliceous and carbonate–siliceous) rocks and noneconomic (small) deposits. The most promising areas are Late Cretaceous and Paleogene peneplains of the Southern Urals (Trans-Uralian and Zilair regions). It is necessary to intensify works on the improvement of concentration technique for manganese ores and to carry out the marketing study of the expediency of replacing imported manganiferous concentrates by those obtained from the Uralian ores.  相似文献   

9.
Analysis of terminology used for the aluminous rocks shows expediency of the application of term “allite” for the whole group of aluminous rocks. However, irregular behavior of Al in the natural setting calls for the identification of two principally different groups: typical bauxites of different genetic classes and chemogenic allites (chemallites). Taking into consideration the mineral and chemical compositions and geological constraints of these rocks, their typification is refined and some corrections are introduced into the terminology. Allites are divided into the following types: chemogenic bauxites of the Moscow region and Birilei area; supergene sulfate allites of Siberia and the Zhigulevsk area; volcanogenic sulfate allites of the Zaglik area; aluminous argillizites; and metamorphogenic allites. In terms of the chemical and mineral compositions and technological properties, chemogenic allites of the first two types are rather similar to sedimentary bauxites with a small boehmite admixture. In mineralogical diagrams, they mainly correspond to the clayey bauxite field.  相似文献   

10.
Geological, methodological, and economic aspects of the production and utilization of petrother mal resources (heat of “dry” rocks) for electric energy production and heat supply are considered. Possibility of the utilization of natural fracture zones or artificial fissure zones, which are created by hydraulic fracturing of underground rock massifs, is noted. Application of new tools for drilling deep wells makes the petrochemical energy competitive relative to both other types of renewable resources and traditional organic fuel.  相似文献   

11.
This report presents the first results of U/Pb dating, isotope-geochemical, and geochemical studies of detrital zircons from the Neoproterozoic clastic rocks of the Southern Timan. Sixty-one zircon grains were treated, including 51 from red-colored sandstones and 10 grains from aleurosandstones of the Djejim Formation of the southern Chetlas-Djejim zone (Djejim-Parma Hill). It was found that the U/Pb-ages of zircons from the rocks of the Djejim Formation, varied from ∼2.97 to ∼1.20 Ga. The studies of microelement composition in 47 grains (of 61 U/Pb isotope ages obtained), on the basis of several empirical regularities found formerly, show that the detrital zircons had originated from “granites” (22 grains), “diorites” (12 grains), or their volcanic analogues, or more rarely, from “syenites” and “basites” (5 and 8 grains, respectively). The Lu/Hf isotope system of zircons allows one to estimate the model ages (T DMC) of the substrate magmatic rocks being parental to the zircons considered. In particular, Archean zircons are characterized by ∼2.84–3.36 Ga model ages of magmaforming rocks. For some of the grains, their model ages (∼2.84 Ga) are close to those of zircons as such (∼2.7–2.8 Ga), which points to the juvenile character of the substrate from which the parent magma of the zircons treated was fused. For Proterozoic (to Middle Riphean) zircons, the Lu/Hf isotope system allows one to estimate the model age of the substrate of their parental rocks within ∼2.00–3.36 Ga, which shows that these rocks were formed under the recycling of the Archean and Early-Proterozoic crust. The ages obtained for detrital zircons, as well as model ages of the substrate of the corresponding parental magmatic rocks, are quite comparable to the age of crystalline complexes of the ancient framework of the East European Platform (EEP), formed in the course of the Archean, Early-Proterozoic, and Early-Middle Riphean tectonomagmatic events. This permits us to conclude that the Neoproterozoic detrital complexes of the Timan were formed owing to the erosion of earlier Neoproterozoic and Early Precambrian complexes constituting the Neoproterozoic Baltica continent, presenting complexes of the passive margin of this continent. A variety of ages of detrital zircons from sandstones and aleurosandstones from the Djejim Formation of Djejim-Parma Hill, and of the estimates of magmatic rocks parental to these zircons, may be characterized as a Baltic Provenance signal.  相似文献   

12.
Durability is one of the most important engineering properties of weak and clay-bearing rocks. Weathering can induce a rapid change in rock material from initial properties to soil-like properties. The sensitivity of a rock type against weatherability is usually described by a durability parameter, such as the slake durability index. However, marl resistance is not detected satisfactorily by the durability indices by using slake durability test as suggested by ISRM for two wetting–drying cycles. The results of this study are obtained from samples of compact or laminated eocene marls from region of Dalmatia, Croatia. The samples were subjected to 4 cycles of slake durability, point load tests, determination of dry density, determination of carbonate content and absorption of water. The scatter of data suggests that strength probably has no influence on the durability of marls. On the other hand a separate group of marl samples have a second-cycle slake durability index higher than approximately 85%, and the durability of these samples is classified as “medium-high” to “high”, although the visual inspection of samples after testing, suggests that they should have “medium” to “low” durability classification. According to obtained results these samples of marl fulfil the criterions for the durability classification: a carbonate content lower than approximately 65%, a dry density lower than 2.4 Mg/m3, and values of water absorption higher than 5%.  相似文献   

13.
In the framework of a regional landslide susceptibility study in southern Sicily, a test has been carried out in the Tumarrano river basin (about 80 km2) aimed at characterizing its landslide susceptibility conditions by exporting a “source model”, defined and trained inside a limited (about 20 km2) representative sector (the “source area”). Also, the possibility of exploiting Google Earth software and photo-images databank to produce the landslide archives has been checked. The susceptibility model was defined, according to a multivariate geostatistic approach based on the conditional analysis, using unique condition units (UCUs), which were obtained by combining four selected controlling factors: outcropping lithology, steepness, plan curvature and topographic wetness index. The prediction skill of the exported model, trained with 206 landslides, is compared with the one estimated for the whole studied area, by using a complete landslide archive (703 landslides), to see to what extent the largest time/money costs needed are accounted for. The investigated area stretches in the fore-deep sector of southern Sicily, where clayey rocks, mainly referring to the Numidian Flysch and the Terravecchia Formations, largely crop out. The results of the study confirm both the exploitability of Google Earth to produce landslide archive and possibility to adopt in assessing the landslide susceptibility for large basin, a strategy based on the exportation of models trained in limited representative sectors.  相似文献   

14.
The geological-geophysical, methological, and economic aspects of extraction and utilization of petrothermal resources (“hot dry rock thermal”) for thermal and electric energy production were considered. Heat collectors are hydraulic fracturing zones of natural or artificially made cracks in the crystalline rocks of the basement; these rocks have higher temperature and can be a kind of “thermal cauldron.” Detection of such “collectors” can be carried out by geophysical methods. When pumped out of wells and warmed to 100–300°C, waters function as a heat transfer for thermal energy supply and electric energy generation. If the technical problem of the rapid drilling of 6–10 km wells could be solved, then petrothermal energy will become competitive with the traditional types of energy production and supply.  相似文献   

15.
The behavior of stable carbon and oxygen isotopes in carbonates during the deposition and diagenesis of sediments in the bioproductive Upper Famennian Pripyat Trough (southern Belarus) is discussed. Limestones and clayey limestones (Corg 0.92 ± 0.11%) are characterized by very low δ13C values (–9.6 ± 0.3‰). Parental sediments of these rocks were deposited in the shallow-water zone during slow downwarping episodes of the seafloor. Lithification of the sediments took place in oxidative conditions of the diagenesis zone. Organic matter was actively oxidized by free oxygen. Carbon dioxide with isotopically light organic carbon formed in this process was used during the crystallization of diagenetic carbonates that are visually indiscernible from the sedimentational variety. Marls, clayey marls, and carbonate-bearing clays (Corg 6.02 ± 0.80%) are characterized by δ13C values as high as –3.5 ± 0.6‰. In combustible shales (Corg >10%), δ13C value is ‒1.2 ± 0.6‰). The clayey rocks mark the episodes of sedimentation in relatively deep-water conditions that appear during the uncompensated sagging of the basin floor. The diagenetic zone with free oxygen was significantly decreased or absent at all. Here, oxygen of marine sulfates was the main or single oxidizer of organic matter (sulfate reduction). The sulfate oxygen is a weaker oxidizing agent than free oxygen. Therefore, much more organic matter was retained and fossilized in clayey rocks than in carbonate rocks. Organic carbon released during the sulfate reduction and mobilized later for the diagenetic carbonate formation was insufficient for the significant decrease of δ13C values relative to the marine carbonate standard. Isotopic composition of carbonate oxygen in the studied rocks is invariable and does not depend on the content of clay and organic matter. In these rocks, δ18O values are at the level (approximately –5‰) shown for the Famennian in the Global Chemostratigraphic Chart. This fact is consistent with the supposition that oxygen isotope composition of atmospheric precipitates, which influenced the rock formation via continental flow, is close to that of sea water in low latitudes where the territory of Belarus was located in the Late Devonian.  相似文献   

16.
The occurrence of ultra high pressure (UHP) and high pressure (HP) relicts associated with oceanic material suggests the presence of a suture zone within the Rhodope Massif. Characterisation of the accreted igneous terranes and their relationship with the UHP/eclogite occurrences provide new constraints on the location of this suture. Single-zircon evaporation and sensitive high-resolution ion microprobe dating of orthogneiss protoliths define two groups of intrusion ages: Permo-Carboniferous and Late Jurassic–Early Cretaceous. Structurally, the Late Jurassic gneissic complex overthrust a unit with Permo-Carboniferous orthogneisses. A “melange zone” marked by mylonites, eclogites, amphibolites, and UHP micaschists separates these two units. We interpret these observations in terms of two distinct igneous terranes, the Thracia (Permo-Carboniferous) and Rhodope (Late Jurassic) terranes, separated by the Nestos suture, and assembled during the closure of an oceanic basin of the Tethys. Geochemically, the Late-Jurassic rocks are akin to subduction magmatism, possibly the same subduction that caused the UHP metamorphism of metasediments within the “melange zone”. Observed UHP–HP relicts are restricted to the tectonic contact zone, suggesting that a single subduction/collison event can explain the occurrences of UHP relicts and eclogites in the Central Rhodope, and that subducted rocks are exhumed only within the Nestos suture.  相似文献   

17.
Discrete multifractals   总被引:12,自引:0,他引:12  
The concept of multifractal modeling has been used intensively in various fields of science for characterizing measures with self- similarity. It has been shown that multifractal modeling provides powerful tools for characterizing patterns in the spatial distribution of geological quantities and objects. Existing multifractal models were proposed for the purpose of handling spatially intertwined fractals with continuous fractal spectrum f(α) (or continuous codimension function C(γ)). In this paper, these conventional multifractals are termed “continuous multifractals” whereas multifractals with discrete fractal dimensions are termed “discrete multifractals.” The properties of discrete multifractals are investigated. It is shown by various artificial examples and a case study of stratigraphy of Ocean Drilling Program (ODP) site 645 that spatially intertwined fractals/multifractals indeed can have discrete fractal dimensions. Histogram-and moment-based techniques are proposed for discrete multifractal modeling and illustrated using the artificial examples. The new concept of discrete multifractals and associated multifractal modeling yields not only techniques for characterizing multifractals with discrete fractal dimensions but it also provides insight into the relationships between fractals, bifractals, and multifractals.  相似文献   

18.
The geologic evolution of the New Zealand microcontinent was characterised by intermittent Cretaceous to Quaternary episodes of intraplate volcanism. To evaluate the corresponding mantle evolution beneath New Zealand with a specific focus on the tectonic evolution, we performed a combined major and trace element and Hf, Nd, Pb, Sr isotope investigation on a suite of representative intraplate volcanic rocks from both main islands and the Chatham Islands. Isotopically, the data set covers a range between “HIMU-like” end member compositions (206Pb/204Pb: 20.57, 207Pb/204Pb: 15.77, 87Sr/86Sr: 0.7030, εHf: + 3.8, εNd: + 4.2), compositions tending towards MORB (206Pb/204Pb: 19.01, 207Pb/204Pb: 15.62, 87Sr/86Sr: 0.7028, εHf: + 9.9, εNd: + 7.0) and compositions reflecting the influence of subducted sediments (206Pb/204Pb: 18.99, 207Pb/204Pb: 15.67, 87Sr/86Sr: 0.7037, εHf: + 4.4, εNd: + 3.9). Whereas volcanism on the Chatham Islands constitutes the HIMU end member of our data set, intraplate volcanic rocks from the North Island are dominated by MORB-like compositions with relatively radiogenic 206Pb/204Pb signatures. Volcanic rocks from the South Island form a trend between the three end members. Assuming a polybaric melting column model, the primary melt compositions reflect variations in the degree of melting, coupled to variable average melting depths. As the three isotope and trace element end members occur throughout the volcanic episodes, the “HIMU-like” and the sediment influenced signatures most likely originate from a heterogeneous subcontinental lithospheric mantle, whereas an asthenospheric origin is inferred for the MORB-like component. For the South Island, affinities to HIMU wane with decreasing average melting depths whereas MORB and sediment-like signatures become more distinct. We therefore propose a polybaric melting model involving upper asthenospheric mantle and a lithospheric mantle source that has been modified by subduction components and veins of fossil “HIMU-like” asthenospheric melts. The proportion of asthenospheric versus lithospheric source components is controlled by variations in lithospheric thickness and heat flow, reflecting the different tectonic settings and rates of extension. Generally, low degree melts preferentially tap enriched vein material with HIMU signatures. The widespread occurrence of old Gondwana-derived lithospheric mantle beneath intraplate volcanic fields in East Gondwana is suggested by overall similarities between New Zealand intraplate volcanic rocks and volcanic rocks in East Australia and Antarctica. The petrogenetic model proposed here may therefore serve as a general model for the petrogenesis of Cretaceous to Recent intraplate volcanic rocks in former East Gondwana. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

19.
Comparison of Mathematical Methods of Potential Modeling   总被引:1,自引:0,他引:1  
Various attempts are known to turn the “catalogue” of mineral deposit models compiled by Cox and Singer (1986) operational, and have initiated activities called “potential mapping”, “potential modeling”, or “targeting”. The common ultimate objective is to estimate the probability for a given location that a mineralization of a given type occurred. The mathematics range from “weights of evidence” and others featuring a Bayesian approach to logistic regression by maximum likelihood, and include other realizations by means of fuzzy methods, genetic programming, and artificial neural nets. Once developed and coded, applications are not restricted to mineral prospection and exploration but include any kind of occurrences and their estimated probabilities, e.g., risk assessment of land slides and many others.  相似文献   

20.
The results of application of the LA-ICP-MS method for analysis of U-Pb ages of detrital zircons from Serebryanka Group (Middle Urals) has been presented for the first time. It has been found that the detrital zircon population in tillite-like conglomerates of the Tany Formation is represented nearly in equal shares by grains with Neoarchean and Paleoproterozoic U-Pb ages. This allows the basement crystalline rocks from the eastern part of the East European Craton to be considered as the principal source of aluminosilicate clastic material in the beginning of the Serebryanka. The population of detrival zircons in sandstones from the Kernos Formation consists of Meso- and Neoarchean (approximately 15%), Paleoproterozoic (∼60%), and Mesoproterozoic (∼26%) zircon grains. Comparison of the obtained data with the materials on detrital zircons from Tonian and Ediacarian sandstones in the southern Urals has shown that the principal role in formation of Tonian and Ediacaran sedimentary sequences was played by the products of Mid- and Late Paleoproterozoic crystalline rock erosion in the craton socle. In addition to this, accumulation of the Serebryanka Group took place with visible participation of more ancient—Early Paleoproterozoic, Neo- and Mesoarchean—rock associations on the paleo-water catchment areas. The end of the Serebryanka period differed from its beginning by the additional appearance of Mesoproterozoic complexes in alimentation zones; for comparison, the role played by these complexes in formation of Ectasian-Ediacarian deposits of the adjacent southern Urals segment is insufficient, judging by the currently available data. All these facts may indicate that there are significant differences in the spatiotemporal distribution of clastic material sources for Upper Precambrian deposits in the West Megazone of the southern and middle Urals.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号