共查询到20条相似文献，搜索用时 15 毫秒
1.
天然气水合物是一种新型的清洁能源, 南海北部神狐海域的地质条件有利于水合物的形成和储藏。传统的多道地震(MCS)数据难以得到精确的速度信息, 并且只能从时间域上判断地质体纵向分布。海底地震仪(OBS)是一种常用的主动源地震仪器, 可以接收到更清晰的气枪信号。相比于MCS, OBS剖面上的折射震相可以揭示较深部的地层速度信息。文章结合MCS和OBS的优势, 识别水平叠加剖面上的反射层位, 并得到初始模型; 将OBS剖面和水平叠加剖面拼合, 从而判断OBS剖面上反射震相所对应层位; 拾取OBS台站上的反射和折射震相, 使用RayInvr软件正演模拟得到水合物存在区域的二维速度模型, 解决了MCS中较为困难的时深转换问题。最终模型显示了水合物、游离气区域的埋深、厚度和速度, 以及似海底反射(BSR)下方更深部界面的深度和速度特征。 相似文献
2.
在将钻井垂直地震剖面(VSP)数据的时深拟合公式应用于深部地层的时深转换时,拟合深度与计算的层速度常常不够准确。本文首先利用多项式和幂函数给出了东海陆架盆地中部某凹陷41口钻井VSP数据的时深拟合公式,并用双程旅行时(TWT)最深达8 s的三维地震速度体数据与多道地震剖面对拟合公式在深部地层的适用性进行分析。在TWT为8 s时,速度体数据表明41口钻井位置的平均深度为18 140 m,平均层速度为6 208 m/s,二次多项式的平均拟合深度较之偏高9.2%,计算的层速度偏高36.2%,幂函数则分别偏低28.9%与35.6%,拟合效果都不理想。对此,本文采用通过识别VSP数据的增速拐点并对增速拐点前的VSP数据进行二次多项式拟合,对增速拐点后的VSP数据进行幂函数拟合的分段拟合模型,将TWT为8 s时的平均拟合深度和层速度的误差降到3.3%与4.7%。地震剖面显示研究区莫霍面深度约为TWT=11 s,分段拟合模型在TWT=11 s的平均拟合深度为27 516 m,层速度为7 334 m/s,更接近前人研究成果,表明该模型能显著提高深部地层时深转换的精度。 相似文献
3.
时深转换是将地震资料解释成果转化为地质成果的一个重要环节,以油田勘探实际资料为例针对几种不同的时深转换方法进行深入讨论.对于常速成图分区分深度进行幂函数拟合是最理想的办法,对于变速成图在实际应用中需根据不同的资料特征和实际情况选用不同的变速成图方法.通过变速成图计算误差的对比阐述各种方法的优缺点和适用范围,进而根据不同的地质及地震反射条件,选择合适的时深转换方法,以达到最佳的地质成果. 相似文献
4.
In the Shenhu area of the northern South China Sea (SCS), canyon systems and focused fluid flow systems increase the complexity of the gas hydrate distribution in the region. It also induces difficulties in predicting the hydrate reservoir characteristics and quantitatively evaluating reservoir parameters. In this study, several inversion methods have been executed to estimate the velocities of strata and gas hydrate concentrations along a profile in the Shenhu area. The seismic data were inverted to obtain the reflection coefficient of each stratum via a spectral inversion method. Stratigraphic horizons were then delineated by tracking the inverted reflectivities. Based on the results of spectral inversion, a low-frequency velocity field of the strata was constructed for acoustic impedance inversion. Using a new iterative algorithm for acoustic impedance inversion, reflection coefficients were converted into velocities, and the velocity variations of the strata along a 2D seismic line were then obtained. Subsequently, gas hydrate saturations at well SH2 were estimated via the shale-corrected resistivity method, the chloride ion concentration method and three different rock physics models. The results were then compared to determine the optimal rock physics model, and the modified Wood equation (MWE) was found to be appropriate for this area. Finally, the inverted velocities and MWE were used to predict the distribution and concentrations of gas hydrates along the seismic line. The estimated spatial distribution of gas hydrates is consistent with that from sonic logging and resistivity data at well SH2, and with the drilling results. Therefore, this method is applicable in areas with no well data, or with few wells, and provides an effective tool for predicting and evaluating gas hydrates using seismic data. 相似文献
5.
对南海某海域深度100～400 m的海底浅层（约2 m埋深范围）沉积物柱状样在接近海底水压力下进行三轴应变-声学同步测量,结果表明沉积物纵波声速有两个特征:（1）从应变过程开始到结束,沉积物纵波声速不断变化;（2）平均声速随着平均静弹性模量的增加,由大变小又由小变大,存在声速最小值。这些结果与海底浅表层沉积物的物理力学性质、围压、颗粒的结合状态改变有关。此外,沉积物动弹性模量和孔隙度呈良好的负相关性,这与孔隙度增大含水量增大有关;动弹性模量是静弹性模量的10～100倍,这主要与三轴应变试验的应变数量级与声波振动产生的应变数量级的差异大有关。采用本论文实验测量的数据分别建立了双复合参数-声速和孔隙度-声速经验公式,分析结果表明双复合参数-声速公式声速预报误差约是孔隙度-声速公式的1/4,表明双复合参数-声速公式更加有效。 相似文献
6.
Seismic properties of sediments are strongly influenced by pore fluids. Stiffness of unconsolidated marine sediment increases
with the presence of gas hydrate and decreases with the presence of gas. A strong bottom-simulating reflector (BSR) observed
on a seismic profile in the Makran accretionary prism, offshore Pakistan, indicates the presence of gas hydrate and free-gas
across the BSR. Elastic properties of gas depend largely on pressure and temperature. We, therefore, first determine the elastic
modulus of gas at pressure and temperature calculated at the BSR depth in the study region. The interval velocities derived
from the seismic data are interpreted by the effective medium theory, which is a combination of self-consistent approximation
and differential effective medium theories, together with a smoothing approximation, for assessment of gas hydrate and free-gas.
The results show the saturations of gas hydrate and free-gas as 22 and 2.4% of pore space, respectively, across the BSR. 相似文献
7.
8.
Abstract Keeping in view the paucity of information as to the nature of the marine sediments from the continental shelf adjoining the Indian subcontinent, a number of shallow seismic surveys were carried out, nearshore and offshore Bombay between 18°45'N and 21°00'N. Representative core samples preserving their natural state were also retrieved from the region in the water depths ranging from 5 to 70 m for the determination of physical properties in the laboratory. Data on the physical, acoustic, and elastic properties of the sediment cores are reported for the first time. Useful individual least‐squares relations are presented for acoustic impedance, reflection coefficient, and bulk modulus against density; for the dependence of rigidity and bulk moduli on the constrained modulus; for the association between impedance and field sediment velocity against P‐velocity; and for rigidity against Poisson's ratio. Results indicate that the bulk modulus and Young's modulus are higher for silty clay and clayey silt samples than for the clay samples. Similarly, the acoustic impedance, reflection coefficient, and constrained modulus of silty clay and clayey silt are also higher than clay. The results are found to be comparable to the North Atlantic and Bay of Bengal sediments. 相似文献
9.
以不同刚度硅胶圆杆群为概化植物模型,测定其抗弯弹性模量,通过波浪水槽实验,研究规则波在不同刚度植物杆群内的流速分布、紊动特征及不同刚度杆群的消浪效果。实验结果表明,当波浪通过柔性杆群时,受其摆动的影响,流速周期变化从单峰型逐渐转变成双峰型,杆群刚度越小形成的二次波峰越明显;不同刚度杆群内水体紊动强度变化显示,杆群刚度越大,造成杆群内水体的紊动强度越大;随着杆群抗弯弹性模量的增大,其消浪系数也增大,消浪系数的增长与材料的抗弯弹性模量值非线性关系,而是在某一弹性模量范围内,对消浪系数的影响较为敏感。 相似文献
10.
海底沉积物纵波波速与物理-力学性质的理论关系和比较 总被引：3，自引：1，他引：2
本文提出以密度变化比和等效弹性模量变化比为参数描述海底沉积物纵波波速,得到密度变化比是由孔隙率、海水密度和海底沉积物固相密度构成的复合参数,建立了以复合参数和等效弹性模量变化比为变量的泰勒多项式海底沉积物纵波波速公式。基于单因素分析法得出纵波波速可表示为参考声速与调制函数的乘积,沉积物的参考声速由海底底质物理性质确定,建立了复合参数-声速的近似理论模型。对该理论模型与现有的主要纵波波速经验公式的分析结果表明,孔隙率-纵波波速经验公式只是参考声速不同,但调制函数是互相等效的,验证了本文海底沉积物纵波波速理论关系的有效性。 相似文献
11.
辽东湾地区下第三系地震速度—岩性预测模型研究 总被引：9，自引：1，他引：9
地震速度－岩性预测模型由四个子模型组成：即（１）砂泥岩压实模型；（２）地震层速度转换模型；（３）速度校正模型；（４）砂岩指数转换模型。辽东湾地区的实际资料证明，上述四个子模型不但决定了岩性预测的具体方法，而且严格控制岩性预测的精度。 相似文献
12.
Gas hydrate and free gas distribution from inversion of seismic data on the South Shetland margin (Antarctica) 总被引：2，自引：0，他引：2
Tinivella Umberta Accaino Flavio Camerlenghi Angelo 《Marine Geophysical Researches》2002,23(2):109-123
Travel-time inversion is applied to seismic data to produce acoustic velocity images of the upper 800 m of the South Shetland margin (Antarctic Peninsula) in three different geological domains: (i) the continental shelf; (ii) the accretionary prism; (iii) the trench. The velocity in the continental shelf sediments is remarkably higher, up to 1000 m/s at 600–700 m below seafloor, than that of the other two geological domains, due to the sediment overcompaction and erosion induced by the wax and waning of a grounded ice sheet. Pre-stack depth migration was applied to the data in order to improve the seismic image and to test the quality of the velocity fields. Where the Bottom Simulating Reflector (BSR) is present, positive and negative velocity anomalies were found with respect to a reference empirical velocity profile. The 2D-velocity section was translated in gas hydrate and free gas distribution by using a theoretical approach. The analysis revealed that the BSR is mainly related to the presence of free gas below it. The free gas is distributed in the area with variable concentration and thickness, while the gas hydrate is quite uniformly distributed across the margin. 相似文献
13.
在地质导向钻前建模过程时,通常利用水平井附近的多口邻井确定钻遇地层的深度及方位,该层的井间横向构造起伏可以利用解释层位来控制趋势;当井眼处测井解释的深度与解释的地震层位深度有差异时,建立的前导模型将有很大的误差。此文采用测井地震联合建模的方法来控制误差范围。该方法首先利用测井解释结果对大套的地震解释层位进行校正,根据每口井解释的小层厚度,利用滑动平均算法构造小层等厚体数据,然后利用校正后的地震解释层位横向约束控制地层起伏,建立每一地质小层的构造图,以此提高地质导向水平井着陆精度。实际资料验证,该方法会大大减小误差,能把模型误差控制在2m的范围内。 相似文献
14.
深入研究珠江口地区海陆过渡带壳内低速层的结构和构造特征对于理解板内地震的发震机理、孕震构造及该区域的地壳结构具有重要的地质地球物理意义。利用2015年珠江口区域海陆地震联测L2-ME测线上的19个地震台站(包括陆上台站14台, 海底地震仪5台)记录到的地震数据来探明该区域低速层的结构和构造特征。在常规震相的基础上, 加入了大量的滑行波震相(Ph)进行结构模型计算, Ph震相的增加使得地壳内部10~20km范围内的射线覆盖密度有了显著提高, 从而获得了L2-ME测线下方更为精确的地壳纵波速度结构模型。结果发现, 模型中测线下方13~18km深度范围内稳定连续展布的壳内低速层被清晰成像, 其内部速度稳定在5.7~6.0 km·s-1之间, 与上下层界面速度差分别为0.5km·s-1、0.4km·s-1, 低速特征明显。该低速层厚度由陆侧的3.5km左右降至海侧的1km, 呈现出向海侧逐渐减薄的趋势, 低速层底界面起伏变化较大且具有与莫霍面相似的起伏特征。 相似文献
15.
叠前深度偏移在速度复杂或构造复杂地区的成像具有优势,目前已经成为地震数据处理领域的标准流程.对叠前偏移处理数据进行后续的解释主要有两种思路：时深转换到时间域进行解释、直接在深度域进行解释.在深度域进行解释有很多优点,但也存在一些难点：褶积模型的适用性、井震标定的适用性以及深度校正问题.在前人研究和工作实践的基础上,提出了一种在深度域进行解释的方法,尽量适应目前解释系统、工作习惯、工作思路的方法. 相似文献
16.
《Marine and Petroleum Geology》2012,35(1):96-110
We present a methodology for generating pre-drill estimations of hydrate saturations using conventional 3D seismic data. These seismic-based estimates will be compared with well log derived saturations from the subsequently drilled wells of the Gulf of Mexico Gas Hydrate Joint Industry Project Leg II (JIP Leg II) expedition.Predicting saturation of gas hydrates (Sh-seismic) combines pre-stack seismic inversion, rock physics modeling and stratigraphic interpretation. Before the wells were drilled, no nearby sonic and density logs were available to define and calibrate the elastic property trends for the shallow target interval containing the gas hydrate stability zone. Therefore, rock property trends were established by applying principles of rock physics and shallow sediment compaction, constrained by known regional geological parameters. Sh-seismic volumes were generated by inverting pre-stack data to acoustic impedance (PI) and shear impedance (SI) volumes, and then analyzing deviations from modeled impedance trends. To enhance the quality of the inversion, the signal-to-noise ratio of the offset data was maximized by conditioning the seismic prior to inversion. Seismic stratigraphic interpretation plays an important role by identifying the more promising strata and structures for the presence of gas hydrates.The pre-drill Sh-seismic results are compared with saturations calculated from log data, Sh-log, of the wells drilled in the JIP Leg II campaign. Due to weaker seismic reflections, predictions may be less accurate for low concentrations, such as saturations less than 40%, and for thin intervals below the vertical resolution of the seismic data (about 15 m). However, the integrated geophysical workflow is very effective for identifying and quantifying significant hydrate concentrations, making the method a promising prospecting technique. 相似文献
17.
Xiangchun Wang Timothy A. Minshull Changliang Xia Xuewei Liu 《Marine Geophysical Researches》2012,33(4):389-396
It is very important for converting the seismic data from the time domain to the depth domain. Here we discuss the approaches of inverse modeling of travel times for determination of the P-wave velocity (Vp). The migration section of the single channel seismic data is used to define the model horizons and help to control their geometry. Wide angle hydrophone data of OBS are used to determine P-wave travel times. The picked travel times from various shots are inverted for P-wave interval velocities using RayInvr, which calculated theoretical travel times via ray tracing. Damped least squares optimization is performed to fine tune the fits between observed and calculated travel times. In the end, the Vp curve is achieved and the results are compared with that derived from the conventional hyperbolic curve velocity analysis method, the shape of the two curves are similar, and the velocity increases in the layer where gas hydrates are present. 相似文献
18.
The Moho interface provides critical evidence for crustal thickness and the mode of oceanic crust accretion. The seismic Moho interface has not been identified yet at the magma-rich segments （46°-52°E） of the ultra- slow spreading Southwestern Indian Ridge （SWIR）. This paper firstly deduces the characteristics and do- mains of seismic phases based on a theoretical oceanic crust model. Then, topographic correction is carried out for the OBS record sections along Profile Y3Y4 using the latest OBS data acquired from the detailed 3D seismic survey at the SWIR in 2010. Seismic phases are identified and analyzed, especially for the reflected and refracted seismic phases from the Moho. A 2D crustal model is finally established using the ray tracing and travel-time simulation method. The presence of reflected seismic phases at Segment 28 shows that the crustal rocks have been separated from the mantle by cooling and the Moho interface has already formed at zero age. The 2D seismic velocity structure across the axis of Segment 28 indicates that detachment faults play a key role during the processes of asymmetric oceanic crust accretion. 相似文献
19.
Gas hydrate saturation from acoustic impedance and resistivity logs in the Shenhu area, South China Sea 总被引：4，自引：0，他引：4
Xiujuan Wang Shiguo Wu Myung LeeYiqun Guo Shengxiong YangJinqiang Liang 《Marine and Petroleum Geology》2011,28(9):1625-1633
During the China’s first gas hydrate drilling expedition -1 (GMGS-1), gas hydrate was discovered in layers ranging from 10 to 25 m above the base of gas hydrate stability zone in the Shenhu area, South China Sea. Water chemistry, electrical resistivity logs, and acoustic impedance were used to estimate gas hydrate saturations. Gas hydrate saturations estimated from the chloride concentrations range from 0 to 43% of the pore space. The higher gas hydrate saturations were present in the depth from 152 to 177 m at site SH7 and from 190 to 225 m at site SH2, respectively. Gas hydrate saturations estimated from the resistivity using Archie equation have similar trends to those from chloride concentrations. To examine the variability of gas hydrate saturations away from the wells, acoustic impedances calculated from the 3 D seismic data using constrained sparse inversion method were used. Well logs acquired at site SH7 were incorporated into the inversion by establishing a relation between the water-filled porosity, calculated using gas hydrate saturations estimated from the resistivity logs, and the acoustic impedance, calculated from density and velocity logs. Gas hydrate saturations estimated from acoustic impedance of seismic data are ∼10-23% of the pore space and are comparable to those estimated from the well logs. The uncertainties in estimated gas hydrate saturations from seismic acoustic impedances were mainly from uncertainties associated with inverted acoustic impedance, the empirical relation between the water-filled porosities and acoustic impedances, and assumed background resistivity. 相似文献
20.
2D and 3D seismic reflection and well log data from Andaman deep water basin are analyzed to investigate geophysical evidence related to gas hydrate accumulation and saturation. Analysis of seismic data reveals the presence of a bottom simulating reflector (BSR) in the area showing all the characteristics of a classical BSR associated with gas hydrate accumulation. Double BSRs are also observed on some seismic sections of area (Area B) that suggest substantial changes in pressure–temperature (P–T) conditions in the past. The manifestation of changes in P–T conditions can also be marked by the varying gas hydrate stability zone thickness (200–650 m) in the area. The 3D seismic data of Area B located in the ponded fill, west of Alcock Rise has been pre-stack depth migrated. A significant velocity inversion across the BSR (1,950–1,650 m/s) has been observed on the velocity model obtained from pre-stack depth migration. The areas with low velocity of the order of 1,450 m/s below the BSR and high amplitudes indicate presence of dissociated or free gas beneath the hydrate layer. The amplitude variation with offset analysis of BSR depicts increase in amplitude with offset, a similar trend as observed for the BSR associated with the gas hydrate accumulations. The presence of gas hydrate shown by logging results from a drilled well for hydrocarbon exploration in Area B, where gas hydrate deposit was predicted from seismic evidence, validate our findings. The base of the hydrate layer derived from the resistivity and acoustic transit-time logs is in agreement with the depth of hydrate layer interpreted from the pre-stack depth migrated seismic section. The resistivity and acoustic transit-time logs indicate 30-m-thick hydrate layer at the depth interval of 1,865–1,895 m with 30 % hydrate saturation. The total hydrate bound gas in Area B is estimated to be 1.8 × 1010 m3, which is comparable (by volume) to the reserves in major conventional gas fields. 相似文献