共查询到20条相似文献，搜索用时 31 毫秒
1.
南海北缘新生代盆地沉积与构造演化及地球动力学背景 总被引：32，自引：0，他引：32
南海北缘新生代沉积盆地是全面揭示南海北缘形成演化及与邻区大地构造单元相互作用的重要窗口。通过对盆地沉积-构造特征分析,南海北缘新生代裂陷过程显示出明显的多幕性和旋转性的特点。在从北向南逐渐迁移的趋势下,东、西段裂陷过程也具有一定的差异,西部裂陷活动及海侵时间明显早于东部,裂陷中心由西向东呈雁列式扩展。晚白垩世-早始新世裂陷活动应是东亚陆缘中生代构造-岩浆演化的延续,始新世中、晚期太平洋板块俯冲方向改变导致裂陷中心南移,印度欧亚板块碰撞效应是南海中央海盆扩张方向顺时针旋转的主要原因。 相似文献
2.
The Malay Basin is located offshore West Malaysia in the South China Sea, within north central region of 1st order Sunda Block. The basin developed partly as a result of tectonic collisions and strike-slip shear of the Southeast Asia continental slabs, as the Indian Plate collided into Eurasia, and subsequent extrusion of lithospheric blocks towards Indochina. The Sunda Block epicontinental earliest rift margins were manifested by the Palaeogene W–E rift valleys, which formed during NW–SE sinistral shear of the region. Later Eocene NW–SE dextral shear of (2nd order) Indochina Block against East Malaya Block rifted open a 3rd order Malay Basin. Developed within it is a series of 4th order N–S en-echelon ridges and grabens. The grabens and some ridges, sequentially, host W–E trending 5th order folds of later compressional episodes. The Malay Basin Ridge and Graben Model explains the multi-phased structural deformation which started with, the a) Pre-Rift Palaeo/Mesozoic crystalline/metamorphic Basement, b) Synrift phase during Paleogene, c) Fast Subsidence from Late Oligocene to Middle Miocene, d) Compressional inversion of first Sunda fold during Late Miocene, and e) Basin Sag during Plio-Pleistocene with mild compressional episodes. The subsequent Mio-Pliocene folding history of Malay Basin is connected to the collision of Sunda Block against subducting Indian–Australian Plate. This Neogene Sunda tectonics, to some degree after the cessation of South China Sea spreading, is due to the diachronous collision along the 1st order plate margins between SE Asia and Australia. 相似文献
3.
Leo Armada Shu-Kun Hsu Chia-Yen Ku Wen-Bin Doo Wen-Nan Wu Carla Dimalanta Graciano Yumul Jr. 《Marine Geophysical Researches》2012,33(4):369-377
The Philippine Fault Zone, a system of left-lateral strike-slip faults traversing the length of the Philippine Islands, is associated with the oblique convergence between the Philippine Sea Plate (PSP) and the Eurasian Plate (EP). Although it is a major deformational structure within the diffuse PSP–EP convergent boundary, some of its segments, particularly its marine extensions, are not well studied. To investigate the crustal deformation in the marine prolongation of the Philippine Fault Zone offshore Luzon Island, multi-channel seismic (MCS) data, gravity data and centroid moment tensor solutions were used in this study. Focal mechanism solutions from the Global CMT catalog were inverted to determine the average principal stress directions and consequently understand the prevailing stress regime in the study area. The stress inversion results indicate that the direction of maximum compression (σ1) is 321°N, which coincides with the PSP–EP convergence direction. From the MCS profiles, the study area was subdivided into deformation zone and a relatively stable zone. Thrust faulting, folding and general uplift are observed in the deformation zone. This zone is further subdivided into the active and inactive segments. In the active segment, uplift is occurring in the submarine ridge. This deformation pattern can be related to the ongoing uplift in some regions bisected by the PFZ. The inactive segment, characterized by intense folding of the sequences and faulting of the basement and overlying sequences, is suggested as the precursor of the Philippine Fault Zone. Deformation appears to be recently shifted to the east as delineated by an uplifted N-NW trending submarine ridge offshore NW Luzon Island. 相似文献
4.
The evolution of the North Aegean Sea is studied through the development of three deep basins: the North Aegean Trough, the North Skyros Basin and the Ikaria Basin. Bathymetric data, a 2D seismic dataset and the well-investigated stratigraphic records of the onshore deep basins of northern Greece and Western Turkey were used to make structural and seismic stratigraphic interpretations. The study area shows two sharp unconformities that correspond to the Eocene-Oligocene transition and the Miocene-Pliocene shift. These discontinuities were used as marker horizons for a more detailed structural and seismic stratigraphic interpretation resulting in the identification of several seismic units. A general seismic signature chart was established using onshore basin stratigraphy and well data, which was then used to constrain the ages of the different seismic units. The main features observed in the basins are interpreted as: 1) trans-tensional growth patterns in Pliocene and Quaternary sediments that combine NE–SW trending and steeply dipping fault zones that likely correspond to strike-slip corridors and E-W/WNW-ESE trending normal faults, 2) regional erosional truncations of Miocene sediments, likely related to the Messinian Salinity Crisis (MSC), 3) thick delta-turbidite deposits of Neogene age. Only the North Aegean Trough shows evidence of earlier development and polyphase deformation through inversion structures, and additional seismic units. Extension processes in the Aegean region have been driven by the Hellenic slab rollback since the middle Eocene. The widespread development of Neogene basins at the whole Aegean scale attests to a major tectonic change due to an acceleration of the trench retreat in the middle Miocene. The present study shows that the Neogene basins of the North Aegean Sea developed in dextral transtension with the northward migration of the associated NE-SW trending strike-slip faults. At regional scale, this tectonic pattern indicates that the westward escape of Anatolia started to interact with the trench retreat in the middle Miocene, around 10 Myr before the arrival of the North Anatolian Fault in the North Aegean Sea. 相似文献
5.
Tectonic effects of a subducting aseismic ridge: The subduction of the Nazca Ridge at the Peru Trench 总被引：1，自引：0，他引：1
A 1987 survey of the offshore Peru forearc using the SeaMARC II seafloor mapping system reveals that subduction of the Nazca Ridge has resulted in uplift of the lowermost forearc by as much as 1500 m. This uplift is seen in the varied depths of two forearc terraces opposite the subducting ridge. Uplift of the forearc has caused fracturing, minor surficial slumping, and increased erosion through small canyons and gullies. Oblique trending linear features on the forearc may be faults with a strike-slip component of motion caused by the oblique subduction of the Nazca Ridge. The trench in the zone of ridge subduction is nearly linear, with no re-entrant in the forearc due to subduction of the Nazca Ridge. Compressional deformation of the forearc due to subduction of the ridge is relatively minor, suggesting that the gently sloping Nazca Ridge is able to slide beneath the forearc without significantly deforming it. The structure of the forearc is similar to that revealed by other SeaMARC II surveys to the north, consisting of: 1) a narrow zone (10 to 15 km across) of accreted material making up the lower forearc; 2) a chaotic middle forearc; 3) outcropping consolidated material and draping sediment on the upper forearc; and 4) the smooth, sedimented forearc shelf.The subducting Nazca plate and the Nazca Ridge are fractured by subduction-induced faults with offsets of up to 500 m. Normal faulting is dominant and begins about 50 km from the trench axis, increasing in frequency and offset toward the trench. These faults are predominantly trench-parallel. Reverse faults become more common in the deepest portion of the trench and often form at slight angles to the trench axis.Intrusive and extrusive volcanic areas on the Nazca plate appear to have formed well after the seafloor was created at the ridge crest. Many of the areas show evidence of current scour and are cut by faulting, however, indicating that they formed before the seafloor entered the zone of subduction-induced faulting. 相似文献
6.
Marine geophysical data including Seabeam, seismic reflection, magnetics, gravimetry and side-scan sonar have been recently collected along the northern Caribbean strike-slip plate boundary between Cuba and Hispaniola, in the Windward Passage area. The analysis of this comprehensive data set allows us to illustrate active strike-slip tectonic processes in relation to the kinematics of the Caribbean Plate. We show that the transcurrent plate boundary trace runs straight across the Windward Passage, from the southern Cuban Margin in the west (Oriente Fault) to the Tortue Channel in the east. The Windward Passage Deep is thus not an active pull-apart basin, as previously suggested. The plate boundary geometry implies that the motion of the Caribbean Plate relative to the North American Plate is partitioned between a strike-slip component, accommodated by the Windward Passage active fault zone, and a convergence component, accommodated by compression at the bottom of the Northern Hispaniola Margin. On the basis of a correlation with onland geological data, an age is given to the stratigraphic sequences identified on seismic profiles. A kinematic reconstruction is proposed that follows the tectonic unconformities recognized at sea and on land (Late Eocene, Early Miocene, Middle Miocene and Late Pliocene). Each one of these tectonic events corresponds to a drastic reorganization of the plate boundary geometry. We propose to correlate these events with successive collisions of the northern Caribbean mobile terranes against the Bahamas Bank. During each event, the plate boundary trace is shifted to the south and a part of the Caribbean Plate is accreted to North America. 相似文献
7.
南海晚新生代构造运动与天然气水合物资源 总被引：6，自引：0，他引：6
南海在新生代经历过两次海底扩张产生了南海洋盆.南海北部和南部原来都是被动大陆边缘,但北部在晚新生代由于菲律宾海板块与欧亚板块在台湾地区发生了碰撞,使陆缘遭受到北西向挤压,在陆缘上产生了北西向左旋走滑活动,我们命名此次构造活动为东沙运动;南部陆缘在早中新世末由于南移的南沙地块与婆罗洲地块发生了碰撞,加上此时北移的菲律宾海板块在明都洛岛地区与欧亚板块发生碰撞,以及南部的东南苏拉威西地块与西北苏拉威西地块发生碰撞,在南海南部产生了挤压构造,我们命名此次构造运动为南沙运动.这两次新生代的构造运动改变了南北陆缘的性质,北部陆缘有人因此称之为准被动陆缘,而南部陆缘的南部则变成了挤压边缘.南海南北陆缘在晚新生代受到的挤压活动,对油气成藏和天然气水合物的形成有重要的推动作用,因为挤压活动有利于流体的流动,进而在适当的地方形成油气藏和天然气水合物. 相似文献
8.
The tectonic mechanisms controlling how volcanic arcs migrate through space and geologic time within dynamic subduction environments is a fundamental tectonic process that remains poorly understood. This paper presents an integrated stratigraphic and tectonic evolution of Late Cretaceous to Recent volcanic arcs and associated basins in the southeastern Caribbean Sea using seismic reflection data, wide-angle seismic refraction data, well data, and onland geologic data. We propose a new tectonic model for the opening of the Grenada and Tobago basins and the 50-250-km eastward jump of arc volcanism from the Late Cretaceous Aves Ridge to the Miocene to Recent Lesser Antilles arc in the southeast Caribbean based on the mapping of three seismic megasequences. The striking similarity of the half-graben structure of the Grenada and Tobago basins that flank the Lesser Antilles arc, their similar smooth basement character, their similar deep-marine seismic facies, and their similar Paleogene sediment thickness mapped on a regional grid of seismic data suggest that the two basins formed as a single, saucer-shaped, oceanic crust Paleogene forearc basin adjacent to the now dormant Aves Ridge. This single forearc basin continued to extend and widen through flexural subsidence during the early to middle Eocene probably because of slow rollback of the subducting Atlantic oceanic slab. Rollback may have been accelerated by oblique collision of the southern Aves Ridge and southern Lesser Antilles arc with the South American continent. Uplift and growth of the southern Lesser Antilles arc divided the Grenada and Tobago basins by early to middle Miocene time. Inversion of normal faults and uplift effects along both edges of the Lesser Antilles arc are most pronounced in its southern zone of arc collision with the South American continent. The late Miocene to Recent depositional histories of the Grenada and Tobago basins are distinct because of isolation of the Grenada basin by growth and uplift of the Neogene Lesser Antilles volcanic ridge. 相似文献
9.
郯庐断裂带及其周缘中新生代盆地发育特征 总被引：19，自引：2，他引：19
郯庐断裂带作为中国东部滨太平洋地区一条巨型走滑构造带，对其周缘中、新生代盆地的发育、演化起着重要的控制作用。随着太平洋板块俯冲方向从NNW向NW到NWW的变化，郯庐断裂带的活动方式逐步从中生代左行走滑-左行斜向滑动过渡到早第三纪以左行斜向-倾向滑动，晚第三纪-第四纪转为倾滑-右行斜向滑动-右行走滑。走滑活动经历了一个循序渐进的周期演变过程。随着郯庐断裂活动方式的演变，其周缘中、新生代盆地的发育逐渐向北迁移，其中南段周缘盆地主要为中生代盆地，中段周缘盆地主要为中、新生代叠加盆地，中北段周缘盆地主要为早第三纪盆地。每个盆地都经历了拉分(伸展)裂陷到挤压反转的演化过程。此外，在同一时期、同一区域剪切应力场作用下，不同区段因其走向变化导致局部应力场变化，在增压弯曲部位发生会聚、挤压、隆升；而释压拉张部位发生离散、伸展、沉降，从而盆地发育。 相似文献
10.
The southwestern margin of the Japan Arc evolved in the geodynamic regime of continental rifting during the Miocene–Pleistocene. This has been verified by broad manifestations of metasomatosis of mantle peridotites that underlie the lithosphere of the Japan Islands and by episodes of deep magmatism (kimberlites and melilitites) in the region. The high enrichment of deep melts in incompatible rare and rare earth elements is partially preserved in melts of regional basalts from smaller depths. In contrast, spreading basalts of the Sea of Japan and subduction basalts from the Nankai trench at the boundary with the Philippine Plate are extremely depleted in rare elements. 相似文献
11.
Angelique A. Pairault Robert Hall Christopher F. Elders 《Marine and Petroleum Geology》2003,20(10):1141-1160
The Seram Trough is located in the northern part of the Banda Arc-Australian collision zone in eastern Indonesia and is currently the site of contraction between the Bird's Head of New Guinea and Seram Island. It has been interpreted as a subduction trench, an intra-continental thrust zone and foredeep, and a zone of strike-slip faulting. Recently acquired 2D seismic lines clarify its tectonic evolution and relationship to the Bird's Head. Folding in the Early Pliocene formed an anticlinorium running from Misool to the Onin Peninsula of Irian Jaya and produced a newly recognised angular unconformity. The unconformity truncates sediments as old as Middle Jurassic and is an ancient topographic surface with significant relief. It was later folded and now dips south towards the trough where it is covered by up to 3 km of sediments. Initial tilting of the unconformity surface was accompanied by deposition of a transgressive sequence which can be traced into the trough. This is overlain by two sequences which prograde towards the trough. These sequences show progressive rotation of the unconformity surface, gravitational displacement of sediments into the trough, and thrusting which continues to the present day. Contraction occurred in the trough after the Early Pliocene and is younger than the previously suggested Late Miocene age. Thrust faults in the trough deform sediments deposited above the unconformity and detach at the unconformity surface. On Seram thrust faults repeat Mesozoic–Miocene sequences and probably detach at their contact with metamorphic basement. The detachment surface must cut through the Mesozoic-Miocene sequence between Seram and the trough. This work suggests the Seram Trough is not a subduction trench but a foredeep produced in response to loading by the developing fold and thrust belt of Seram, with an associated peripheral bulge to the north. The Seram Trough is interpreted to be a very young zone of thrusting within the Australian continental margin. 相似文献
12.
Wang Tan K. McIntosh Kirk Nakamura Yosio Liu Char-Shine Chen How-Wei 《Marine Geophysical Researches》2001,22(4):265-287
A wide-angle seismic survey, combining ocean-bottom seismometers (OBS) and multi-channel seismic (MCS) profiling, was implemented
in the southwestern Ryukyu subduction zone during August and September 1995. In this paper, we present the data analysis of
eight OBSs and the corresponding MCS line along profile EW9509-1 from this experiment. Seismic data modeling includes identification
of refracted and reflected arrivals, initial model building from velocity analysis of the MCS data, and simultaneous and layer-stripping
inversions of the OBS and MCS arrivals. The velocity-interface structure constructed along profile EW9509-1 shows that the
northward subduction of the Philippine Sea Plate has resulted in a northward thickening of the sediments of the Ryukyu Trench
and the Yaeyama accretionary wedge north of the trench. The boundary between the subducting oceanic crust and the overriding
continental crust (represented by a velocity contour of 6.75 km/s) and a sudden increase of the subducting angle (from 5 degrees
to 25 degrees) are well imaged below the Nanao Basin. Furthermore, velocity undulation and interface variation are found within
the upper crust of the Ryukyu Arc. Therefore, the strongest compression due to subduction and a break-off of the slab may
have occurred and induced the high seismicity in the forearc region.
This revised version was published online in November 2006 with corrections to the Cover Date. 相似文献
13.
The North Anatolian Fault crosses the Sea of Marmara from east to west. Tectonic features of the Sea of Marmara were studied
using multi-channel deep seismic reflection data. The northern branch of the North Anatolian Fault is active as a right lateral
strike-slip fault zone and indicates both negative and positive flower structures. The North Anatolian Fault splays into two
faults at the Sea of Marmara as a northern branch and north segment of the southern branch. The northern branch named the
Main Marmara Fault extends in a complicated manner from the north of the Kapıdağı Peninsula to westward in the Sea of Marmara.
The north segment of southern branch extends between the Gemlik and Bandırma gulfs in the south of the Sea of Marmara. In
addition, uplift areas arose by compression and a push-up style in between the Kapıdağı Peninsula and the Main Marmara Fault.
The North Anatolian Fault is characterized by a negative flower structure in basins and push-up style in uplift areas in the
Sea of Marmara. An uplift area arose between the north segment of the southern branch and the northern branch of the North
Anatolian Fault. The north segment of the southern branch of the North Anatolian Fault is a strike-slip fault and displays
a pull-apart style in the seismic reflection data. 相似文献
14.
Bone Gulf is one of the inter-arm basins of the unusual K-shaped island of Sulawesi. Its age, character and origin are disputed. This study is based on recently acquired 2D seismic lines, seabed multibeam mapping and limited well data, and is linked to stratigraphy on land. The gulf is probably underlain by pre-Neogene volcanogenic, sedimentary, metamorphic and ultramafic rocks, and includes crust of Australian origin. We favour basin initiation in the Miocene rather than Eocene, by extension associated with strike-slip deformation. The main basin trends N–S and is divided into several sub-basins and highs. The highs segment the gulf and their WNW–ESE orientations reflect pre-Neogene basement structures. They are interpreted as strike-slip fault zones active at different times in the Neogene. A southern high was active relatively early, whereas further north there is evidence of young displacements during the Late Neogene. These are visible on the seabed above a high linked to the Kolaka Fault on land. Early basin-bounding faults are oriented NNW–SSE and record extension and strike-slip movements, like the sub-parallel Walanae Fault of South Sulawesi which can be traced offshore into extensional faults bounding the young and narrow Selayar Trough. Sediment in the basins came mainly from the north with contributions from both west and east. Carbonate deposits formed at the margins while deeper marine sediments were deposited in the axial parts of the gulf. An Early Pliocene unconformity can be mapped across the study area marking major uplift of Sulawesi and subsidence of Bone Gulf. This regional event caused major influx of clastic sediments from the north, development of a southward-flowing canyon system, and back-stepping and drowning of carbonates at the basin margins. Hydrocarbons are indicated by seeps, and Bone Gulf has potential sources, reservoirs and seals, but the complex faulting history is a risk. 相似文献
15.
Analysis of multi-channel seismic data from the northern East China Sea Shelf Basin (ECSSB) reveals three sub-basins (Socotra, Domi, and Jeju basins), separated by structural highs (Hupijiao Rise) and faulted basement blocks. These sub-basins show a typical rift-basin development: faulted basement and syn-rift and post-rift sedimentation separated by unconformities. Four regional unconformities, including the top of acoustic basement, have been identified and mapped from multi-channel seismic data. Faults in the acoustic basement are generally trending NE, parallel to the regional structural trend of the area. The depths of the acoustic basement range from less than 1000 m in the northwestern part of the Domi Basin to more than 4500 m in the Socotra Basin and 5500 m in the Jeju Basin. The total sediment thicknesses range from less than 500 m to about 1500 m in the northwest where the acoustic basement is shallow and reach about more than 5500 m in the south.Interpretation of seismic reflection data and reconstruction of three depth-converted seismic profiles reveal that the northern ECSSB experienced two phases of rifting, followed by regional subsidence. The initial rifting in the Late Cretaceous was driven by the NW-SE crustal stretching of the Eurasian Plate, caused by the subduction of the Pacific Plate beneath the Eurasian Plate. Extension was the greatest during the early phase of basin formation; estimated rates of extension during the initial rifting are 2%, 6.5%, and 3.5% in the Domi, Jeju, and Socotra basins, respectively. A regional uplift terminated the rifting in the Late Eocene-Early Oligocene. Rifting and extension, although mild, resumed in the Early Oligocene; while fluvio-lacustrine deposition continued to prevail. The estimated rates of extension during the second phase of rifting are 0.7%, 0.8%, and 0.5% in the Domi, Jeju, and Socotra basins, respectively. A second phase of uplift in the Early Miocene terminated the rifting, marking the transition to the post-rift phase of regional subsidence. Regional subsidence dominated the study area between the Early Miocene and the Late Miocene. An inversion in the Late Miocene interrupted the post-rift subsidence, resulting in an extensive thrust-fold belt in the eastern part of the area. Uplift and subsequent erosion were followed by regional subsidence. 相似文献
16.
南冲绳海槽岩石圈构造动力作用机制探讨 总被引：8，自引：1，他引：8
由最新获得的重磁、地震和多波束地形数据 ,结合多尺度的地幔流动力分析 ,展示了南冲绳海槽岩石圈构造动力的多样性特征和其内在的联系。从上新世开始的三幕张性断陷活动是在以前的压性断裂构造的基础上发展起来的 ,向岛弧侧迁移 ,岩浆、火山活动主要集中在正断层与平移断层的交汇处。深部动力源可归结为上地幔对流产生的菲律宾海板块俯冲 ,引起岛弧岩石圈挤压褶皱而向海沟旋张掀斜 ,产生弧后岩石圈的张性构造 ;进一步引起弧后软流圈挤压隆起 ,岩石圈与软流圈耦合作用导致海槽断陷张裂、岩浆活动。冲绳海槽仍是一个软流圈在汇聚的弧后盆地。全球性左旋压扭滑移背景 ,琉球海沟南段俯冲受阻小、强度大 ,台湾—吕宋的北向挤压 ,使海槽表现为剪张性 ,由平移断层调控使张性断裂左旋雁行排列 ,整个海槽张性构造由北往南推进 ,张应力方向由NW过渡到NNW。 相似文献
17.
Multichannel seismic reflection profiles across the Sunda Trench slope off central Sumatra reveal details of subduction zone structure. Normal faults formed on the outer ridge of the trench offset deep strate and the oceanic crust, but die out upsection under the trench sediments. At the base of the inner trench slope, shallow reflectors are tilted seaward, while deeper reflectors dip landward parallel to the underlying oceanic crustal reflector. Intermediate depth reflectors can be traced landward through a seaward-dipping monocline. We interpret this fold as the shallow expression of a landward-dipping thrust fault at depth. Landward of this flexure, relatively undeformed strata have been stripped off the oceanic plate, uplifted 700 meters, and accreted to the base of the slope. The oceanic crust is not involved in the deformation at the toe of the slope, and it can be observed dipping landward about 25 km under the toe of the accretionary prism.The middle portion of the trench slope is underlain by deformed accreted strata. Shallow reflectors define anticlinal structures, but coherent deep reflectors are lacking. Reflectors 45 to 55 km landward of the base of the slope dip 4°-5° landward beneath a steep slope, suggesting structural imbrication.A significant sediment apron is absent from the trench slope. Instead, slope basins are developed in 375–1500 m water depths, with an especially large one at about 1500 m water depth that is filled with more than 1.1 seconds of relatively undeformed sediments. The seaward flank of the basin has recently been uplifted, as indicated by shallow landward-dipping reflectors. Earlier periods of uplift also appear to have coincided with sedimentation in this basin, as indicated by numerous angular unconformities in the basin strata.Contribution of the Scripps Institution of Oceanography, new series. 相似文献
18.
珠江口盆地中新生代主要断裂特征和动力背景分析 总被引：22，自引：0，他引：22
对新处理及新采集的地质地球物理资料进行综合分析,结合前人研究成果,编制了中生代和新生代珠江口盆地主要断裂图,讨论了主要断裂的存在证据、展布形态、活动性质以及它们与盆地各级构造发育的关系等基本特征,并初步分析了它们形成演化的地球动力学背景。珠江口盆地断裂主要由NEE向和NW向断裂组组成,其次为NWW向断裂组和NE向断裂组。中生代西太平洋俯冲带呈NESW向穿过南海东北部,相伴的有NE向火山弧、弧前盆地等压性构造和NW向左行走滑断裂,构成左行压扭体系。晚白垩纪至新生代NEE及NWW向断裂带控制了大规模张裂和沉积盆地的形成,又被NW向断裂带错切,形成了南北分带、东西分块的构造格局,显示了右行张扭应力场特征。 相似文献
19.
日本九州俯冲带是菲律宾海板块与欧亚板块汇聚边界上一个独具特色的区域, 也是研究俯冲带内板块构造作用的理想场所。为了解该俯冲带内的板间应力状态和相互作用, 本研究利用震源深度大于20km的97251个地震事件, 通过b值计算详细刻画了该俯冲板片上表面以及垂直海沟走向的剖面特征。结果发现, b值表现出明显的空间变化, 整体上沿南海海槽和琉球海沟从东北往西南方向逐渐增大, 同时在俯冲的九州-帕劳海脊上存在显著的低值区。从b值与应力的负相关性推断, 进入俯冲带的海脊以及海脊东北侧的四国海盆洋壳与俯冲带上覆板片耦合作用较强; 而在海脊西南侧, 俯冲带内汇聚板片的耦合作用相对较弱。究其原因, 本文认为九州-帕劳海脊两侧俯冲洋壳在形成时代和汇聚速率上的差异起着重要作用。对于九州-帕劳海脊来说, 俯冲带浅部的低b值区主要是由于隆起的海脊增强了与上覆板块的耦合作用。随着俯冲深度的增加和俯冲板片倾角的急剧变陡, 沿海脊可能发生了板片撕裂, 从而释放了海脊与上覆板片间的挤压-剪切应力, 使耦合程度大大减弱。 相似文献
20.
台湾增生楔的构造单元划分及其变形特征 总被引：6，自引：0，他引：6
台湾增生楔位于欧亚板块、菲律宾海微板块和南海的结合部位,是现代弧陆碰撞研究的理想场所。通过对南海973航次在该区域的多道地震剖面的解释,对该增生楔进行了构造单元的划分,并分析了变形特征。认为台湾增生楔是由3个部分,即弧陆碰撞产生的增生部分、洋内俯冲产生的增生部分和增生楔后端在恒春海脊和北吕宋海槽之间的构造楔组成,研究区的高屏斜坡、恒春海脊和北吕宋海槽西端变形带分别是3个部分的反映。自中中新世以来,南海洋壳开始沿着马尼拉海沟向菲律宾海微板块俯冲,形成增生楔中洋内俯冲增生部分;与此同时菲律宾海微板块开始向NW方向移动,前缘的吕宋岛弧自6．5Ma B．P以来与亚洲陆缘斜向碰撞,形成增生楔中弧陆碰撞增生部分。碰撞首先发生在台湾岛的北部,由于弧陆强烈的挤压作用,增生楔后端部分向北吕宋海槽倒冲楔人,使得上部的北吕宋海槽的沉积发生隆升变形。滨海的各个地貌单元可以和台湾陆上的地貌单元相联系,它们具有相似的地质特征,但是由于陆上部分增生历史久,不仅抬升为陆,而且地层的年代也更老。 相似文献