共查询到20条相似文献，搜索用时 93 毫秒
1.
拖曳锚由于其承载性能和深水中便于安装被广泛应用于海洋工程系泊系统中,如:适用于悬链式系泊系统的传统拖曳锚和适用于绷紧式系泊系统的法向承力锚。拖曳锚安装过程中涉及诸多运动特性:锚板运动方向、系缆点处拖曳力和拖曳角及运动轨迹。基于大变形有限元分析技术耦合的欧拉-拉格朗日法,并引入缆绳方程,建立起锚-缆绳-海床土耦合作用的有限元分析模型;模拟了拖曳锚在均质和线性强度黏土中的嵌入安装过程,研究了锚板运动方向、系缆点处拖曳力和拖曳角及运动轨迹等运动特性;通过与已有的有限元分析方法及理论方法进行对比,验证了该分析模型的有效性;与已有的有限元分析方法相比,提出的分析模型有效地提高了计算效率。 相似文献
2.
The penetration behavior and trajectory of the drag anchor in seabed soils are not only determined by properties of the anchor and soil, but also controlled by the installation line especially the segment embedded in the soil. Correctly understanding and describing reverse catenary properties of the embedded line are crucial for improving the drag embedment performance, precisely predicting the anchor trajectory, and solving the positioning problem in offshore applications. The investigation on reverse catenary problems demonstrates that, the reverse catenary shape of the embedded line has to be solved almost through numerical incremental methods. In the present study, based on the mechanical model for the embedded line, the relationship between the tension and geometry of the embedded line, and the interactional equation between the anchor and embedded line are derived. By introducing the concept of the initial embedment depth of the installation line, the reverse catenary equation and the expression for calculating the length of the embedded line are obtained for soils with a linear strength, and the position of the embedment point can be reasonably solved through the derived reverse catenary equation. The reverse catenary equation is then introduced into the kinematic model for drag anchors, which combines the drag anchor, the installation line and the movement of the anchor handling vessel being an interactional system. More information related to the drag embedment problem can be definitely gained through the present work, including not only the anchor behaviors such as the trajectory, penetration direction and ultimate embedment depth, but also the properties of the installation line for both the embedded and horizontal segments. By comparing with drum centrifuge tests and model flume experiments, the efficiency of the theoretical method for predicting the anchor trajectory is well verified. 相似文献
3.
With the application of innovative anchor concepts and advanced technologies in deepwater moorings, anchor behaviors in the seabed are becoming more complicated and pose a great challenge to the analytical methods. In the present work, a large deformation finite element (FE) analysis employing the coupled Eulerian–Lagrangian technique is performed to simulate the installation/mooring line, and then is applied to analyzing comprehensive anchor behaviors in the seabed. By connecting cylindrical units with each other using connector elements, the installation/mooring line is constructed. With the constructed installation/mooring line, FE simulations are carried out to investigate comprehensive anchor behaviors in the seabed, including long-distance penetration of drag anchors, keying of suction embedded plate anchors and non-catastrophic behavior of gravity-installed anchors. Through comparative studies, the accuracy of the proposed method is well examined. A parametric study is also undertaken to quantify the effects of the frictional coefficient, initial embedment depth, and soil weight on the profile of the embedded anchor line and the shackle load. The present work demonstrates that the proposed FE model, which incorporates the installation/mooring line and the anchor, is effective in analyzing the comprehensive anchor behaviors in the seabed. 相似文献
4.
The ultimate embedment depth (UED) is a very important index in evaluating the performance of drag anchors, and hence is of necessity to evaluate the UED precisely in design and analysis. On the other hand, the UED is also a key parameter in predicting the kinematic trajectory of drag anchors in soils by numerical or analytical methods. In this paper, analytical derivations are developed to express the UED not only in clay but also in sand. By analyzing and describing equilibrium forces acting on the anchor and embedded drag line, and the interaction between them at the UED, concise expressions are formulated for predicting the UED in terms of characteristics of the anchor, drag line and soil. Considering that the exact values of the various parameters are seldom known, a parametric analysis is performed systematically. In order to check the applicability and precision, expressions of the UED in clay are compared comprehensively with the other prediction methods. Specially designed tests are also carried out in a model experimental system, and the measured data are used to examine the expression of UED in sand. 相似文献
5.
6.
Gravity installed anchors (GIAs) are the most recent generation of anchoring solutions to moor floating facilities for deepwater oil and gas developments. Challenges associated with GIAs include predicting the initial embedment depth and evaluating the keying performance of the anchor. The former involves high soil strain rate due to large anchor penetration velocity, while the later influences the subsequent behavior and pullout capacity of the anchor. With the coupled Eulerian–Lagrangian method, three-dimensional large deformation finite element models are established to investigate the penetration and keying of GIAs in non-homogeneous clay. In the penetration model, a modified Tresca soil model is adopted to allow the effects of soil strain rate and strain softening, and user-defined hydrodynamic drag force and frictional resistance are introduced via concentrated forces. In the keying model, the anchor line effects are incorporated through a chain equation, and the keying, diving and pulling out behaviors of the anchor can all be replicated. Parametric studies are undertaken at first to quantify the effects of various factors on the performance of GIAs, especially on the penetration and keying behaviors. Based on the results of parametric studies, fitted formulae are proposed to give a quick evaluation of the anchor embedment depth after the installation, and the shackle horizontal displacement, shackle embedment loss and anchor inclination at the end of the keying. Comparative studies are also performed to verify the effectiveness of the fitted formulae. 相似文献
7.
With the application of innovative anchor concepts and advanced technologies in deepwater moorings, anchor behaviors in the seabed are becoming more complicated and significantly affected by the anchor line. Based on the coupled Eulerian–Lagrangian (CEL) method, a numerical approach incorporating anchor line effects is developed to investigate comprehensive anchor behaviors in the soil, including penetration of drag anchors, keying of suction embedded plate anchors and diving of gravity installed anchors. Compared to the method directly incorporating the anchor line into the CEL analysis, the proposed method is computationally efficient. To examine the robustness and accuracy of the proposed method, numerical probe tests and then comparative studies are carried out. It is found that the penetration (or diving) and keying behaviors of anchors can be well simulated. A parametric study is also undertaken to quantify the effects of various factors on the behavior of OMNI-Max anchors, whose mechanisms are not yet fully understood. The maximum embedment loss of OMNI-Max anchors during keying is not influenced by the initial anchor embedment depth, whereas significantly increases with increasing drag angle at the embedment point. With decreasing initial anchor embedment depth or increasing soil strength gradient, drag angle at the embedment point and diameter of the anchor line, the behavior of OMNI-Max anchors could change from diving to pullout, which is undesirable in offshore engineering practice. If the drag angle increases over a certain limit, the anchor will fail similar to a suction anchor. 相似文献
8.
Attributed to good performance in the seabed, drag anchors are adopted as an effective anchoring solution in deepwater mooring systems. This type of anchors is drag installed, companying with comprehensive behaviors during movement of the anchor in the seabed, which make the anchor trajectory and therefore the final embedment position difficult to be predicted. On the basis of the mechanical model and analytical procedure, an analytical method is proposed for exploring comprehensive behaviors of drag anchors in both clay and sand. The anchor behaviors are classified as keying, pulling out and diving. The bearing capacity and the trajectory of the anchor can be predicted through the combination of the three behaviors. By comparing analytical predictions with experimental data and other predictions, the efficiency and veracity of the theoretical model are validated. A parametric study is also performed to investigate the effects of different parameters, and to further understand the comprehensive anchor behaviors in the seabed. The present work provides an efficient theoretical tool for analyzing comprehensive behaviors of drag anchors in either clayey or sandy seabed. 相似文献
9.
Drag anchor is one of the most commonly used anchorage foundation types. The prediction of embedded trajectory in the process of drag anchor installation is of great importance to the safety design of mooring system. In this paper, the ultimate anchor holding capacity in the seabed soil is calculated through the established finite element model, and then the embedded motion trajectory is predicted applying the incremental calculation method. Firstly, the drag anchor initial embedded depth and inclination angle are assumed, which are regarded as the start embedded point. Secondly, in each incremental step, the incremental displacement of drag anchor is added along the parallel direction of anchor plate, so the displacement increment of drag anchor in the horizontal and vertical directions can be calculated. Thirdly, the finite element model of anchor is established considering the seabed soil and anchor interaction, and the ultimate drag anchor holding capacity at new position can be obtained. Fourthly, the angle between inverse catenary mooring line and horizontal plane at the attachment point at this increment step can be calculated through the inverse catenary equation. Finally, the incremental step is ended until the angle of drag anchor and seabed soil is zero as the ultimate embedded state condition, thus, the whole embedded trajectory of drag anchor is obtained. Meanwhile, the influences of initial parameter changes on the embedded trajectory are considered. Based on the proposed method, the prediction of drag anchor trajectory and the holding capacity of mooring position system can be provided. 相似文献
10.
Drag anchor is widely applied in offshore engineering for offshore mooring systems. The prediction of the invisible trajectory during its drag-in installation is challenging for anchor design in determining the anchor final position for ensuring sufficient holding capacity. The yield envelope method based on deep anchor failure for kinematic analysis was proposed as a promising trajectory prediction method for drag anchor. However, there is a lack of analysis on the effects of the parameters applied in the kinematic analysis. The current work studies the effects of the yield envelope parameters, anchor line bearing capacity factor and the anchor/soil interface friction. It is found that the accuracy of the yield envelope parameters has large impact on the prediction results based on deep yield envelopes.Analyses of cases with smooth fluke predict deeper embedment depth than that from analyses of cases with rough fluke. The decrease of the capacity factor results in the increase of the anchor embedment depth, the anchor line load,the anchor chain angle and the stable value of the normalized horizontal load component for the same drag length,while the stable value of the normalized vertical load component decreases when the capacity factor decreases. This illustrates the importance in applying reasonable parameters and improving the method for more reliable prediction of the anchor trajectory. 相似文献
11.
Drag anchor is a widely used economical anchor option for offshore floating structures. The anchor behavior under unidirectional loading and combined loading is important for anchor selection. The anchor behavior under combined loading, characterized by the yield envelope, can also be used for the prediction of anchor installation, which is still an issue in anchor design. However, most existing studies on anchor capacity are for plate anchors which focused only on the anchor pullout capacity in soil with uniform shear strength. The behavior of drag anchor under unidirectional and combined loading in soil with linearly increasing shear strength profile is seldom investigated. The current 2D finite element studies investigate the anchor behavior for a horizontal anchor fluke in clay with linearly increasing shear strength under unidirectional vertical, horizontal and rotational loadings first. Then based on the results of anchor unidirectional loading behavior, the yield envelopes for anchor under combined loading for both shallow and deep embedded flukes are studied. The effect of anchor embedment depth, soil non- homogeneity, soil overburden pressure and the soil/anchor interface breakaway conditions are studied to provide insight for drag anchor design. 相似文献
12.
法向承力锚(Vertically Loaded Plate Anchor,VLA)是一种适用于深水的新型系泊基础,它的拖曳安装过程直接决定了其系泊定位的精度和锚体的最终承载能力。综合考虑VLA锚体、锚泊线和上部船体的运动,建立了一种新的准静力整体分析模型。模型包括不断贯入海床的锚体、锚泊线(土中反悬链段和水中悬链段)和安装船体三部分,针对确定的锚泊线长度,安装船运动张紧锚泊线进行安装的过程,计算了此过程中锚体的运动轨迹、锚泊线形态和作用在船体上的锚泊线张力矢量的变化,重点分析了不同抛链长度和海床土体的参数对安装过程控制的影响,发现链长与水深之比达到5时,接近极限贯入深度。 相似文献
13.
Drag anchor is a widely used anchor type in offshore engineering for the mooring system. The prediction of the anchor trajectory installation and the final position is important for anchor selection in design. The existing method using yield envelope method for trajectory prediction ignored the shallow anchor behavior but applied the deep yield envelope from a deeply embedded horizontal fluke in uniform clay for the whole drag-in installation process. However, the anchor fluke embedment depth and inclination angle change continually during installation in clay with linearly increasing shear strength soil profile in practice. Studies on the effect of fluke inclination angle on the anchor behavior in clay with such non-uniform soil profile under unidirectional and combined loading are important and necessary for the improvement of the yield envelope method to ensure a reasonable prediction. The current 2D finite element studies investigate the anchor behavior for inclined fluke in clay with linearly increasing shear strength under unidirectional vertical, horizontal and rotational loadings first. Then the effects of the fluke inclination angle, soil non-homogeneity and embedment depth ratio on the shallow yield envelopes are investigated. It is found that the effect of fluke inclination angle on the vertical capacity factors for anchor in clay with non-uniform and uniform soil profile is largely different. The resultant large impact on the yield envelopes shown here illustrates the importance of considering the fluke inclination angle and soil non-homogeneity in the prediction of anchor trajectory using yield envelope method. 相似文献
14.
Gravity installed anchors (GIAs) are released from a height of 30–150 m above the seabed, achieving velocities up to 19–35 m/s at the seabed, and embed to depths of 1.0–2.4 times the anchor length. Challenges associated with GIAs include the prediction of anchor initial embedment depth, which determines the holding capacity of the anchor. Based on the coupled Eulerian–Lagrangian approach, a numerical framework is proposed in this paper to predict the embedment depth of GIAs, considering the effects of soil strain rate, soil strain-softening and hydrodynamic drag (modeled using a concentrated force), with the anchor-soil friction described appropriately. GIAs are influenced by the hydrodynamic drag before penetrating into the soil completely, hence the anchor accelerates less than the previous investigations in shallow penetration, even decelerates directly at the terminal impact velocity. The hydrodynamic drag has more influence on OMNI-Max anchors (with an error of ∼4.5%) than torpedo anchors, and the effect becomes more significant with increasing impact velocity. An extensive parametric study is carried out by varying the impact velocity, strain rate and strain-softening parameters, frictional coefficient, and soil undrained shear strength. It is concluded that the dominant factor affecting the penetration is the soil undrained shear strength, then are the impact velocity, strain rate dependency and frictional coefficient, and the minimal is the strain-softening of soil. In addition, although the strain rate dependency is partly compensated by the softening, the anchor embedment depth accounting for the effects of strain rate and strain-softening is lower than that for ideal Tresca soil. Strain rate dependency dominates the combined effects of strain rate and strain-softening in the dynamic installation of GIAs, on which should pay more attention, especially for the calibration of the related parameters and the measured solutions. In the end, the theoretical model based on the bearing resistance method is extended by accounting for the hydrodynamic drag effect. 相似文献
15.
ABSTRACTThe OMNI-Max anchors are newly developed dynamically installed anchors for deep water mooring systems. After installation, the anchor is keyed to a new orientation and position by tensing the attached mooring chain, which is known as the “keying process”. This study conducted 1g model tests to study the trajectories and capacity developments of OMNI-Max anchors in homogeneous and lightly overconsolidated (LOC) clays. A testing arrangement was designed to simulate the anchor keying process with a constant pullout angle at the mudline. A half model anchor which could move against the box glass was used to determine the anchor trajectory in the soil. The effects of padeye offset angle, uplift angle at the mudline, anchor fluke thickness, anchor initial embedment depth, and soil strength on the anchor trajectory and capacity were systematically investigated. Moreover, the critical uplift angle at the padeye and the anchor critical initial embedment depth were discussed. The results indicate that the anchor can dive both in homogeneous and LOC clays under certain conditions. A padeye offset angle of 24–30° is recommended for the OMNI-Max anchor to maintain high capacity and diving trend simultaneously. Besides, the anchor diving trend can be improved with small uplift angles at the mudline and with thick anchor flukes. A critical initial embedment depth of 1.3 times the anchor length is recommended to preclude the anchor from being pulled out. 相似文献
16.
相比于已有动力锚(鱼雷锚、多向受荷锚等),新型轻质动力安装锚借助助推器安装,具有质量轻、埋深大、承载效率高、在海床中下潜容易等特点。良好的水动力学特性(较小的拖曳阻力系数及稳定的下落垂直度)是确保动力安装锚准确、有效地安装到指定地点并贯入到设计深度的前提。通过4组10个工况的模型试验,研究了轻质动力安装锚的终端速度和拖曳阻力系数,及轻质动力安装锚和助推器的组合锚在水中自由下落时的方向稳定性。试验结果表明:优化后轻质动力安装锚的拖曳阻力系数为0.51~0.55,这有助于提高组合锚在水中的下落速度,从而提升组合锚的沉贯深度;增大助推器尾翼展弦比和选用轻质材料制作尾翼能减小组合锚的下落偏角,提高组合锚的方向稳定性。 相似文献
17.
法向承力锚是一种新型的适用于深海工程的系泊基础,其极限抗拔力是锚在工程应用中的关键指标。尝试用两种不同的方法评估法向承力锚的极限抗拔力,其一是基于塑性上限分析理论;其二是运用非线性有限元数值方法。与已有的经验公式相比,所建立的计算模型不仅可考虑海床土性质,还能反映锚板定位(嵌入深度及角度)以及系缆力角度对锚极限抗拔力的影响。在与已有评估方法进行比较的基础上,还特别对锚板的嵌入深度、角度以及系缆力角度变化对极限抗拔力的影响规律进行了分析,对三种方法的适用性进行了评述。 相似文献
18.
This paper reports the results from three-dimensional dynamic finite element analysis undertaken to provide insight into the behaviour of the fish and OMNI-max dynamically installed anchors during loading in crust-over-soft clay sediments. Particular attention was focused on the situations where the anchor is embedded to a shallow depth during dynamic installation due to the strong crust layer. Large deformation finite element analyses were carried out using the coupled Eulerian-Lagrangian approach, incoporating the anchor chain effect. Parametric analyses were undertaken varying the initial embedment depth, anchor shape, loading angle, strength ratio between the top and bottom layers. The tracked anchor trajectory confirmed that the diving potential of the fish and OMNI-Max anchors were enhanced by the presence of the crust layer as that somewhat restircted the upward movement. This will be beneficial for many hydrocarbon active regions with layered seabed sediments where the anchor embedment depths during dynamic installation are expected to be low. 相似文献
19.
系泊系统是半潜式支持平台抵抗恶劣海洋环境作用、限制平台偏移、实现海上定位的重要设备,辐射状多点系泊是常用的布置方式。针对该平台系泊系统开展了设计方法和分析流程研究,阐述了系泊系统配置设计,包括系泊缆的数量、抛出长度、单根系泊缆的刚度、直径、破断负荷、定位锚的型式、最大抓力等;系泊系统的布置设计,包括系泊缆之间的水平夹角、系泊绞车、导缆器、定位锚的位置等;同时归纳风载荷、流载荷以及波浪慢漂载荷的常用估算方法;总结适用于该类平台系泊系统设计的规范要求。将上述方法和流程应用于某型半潜式支持平台系泊系统的开发和设计,采用系泊定位分析程序MIMOSA对该系统的定位能力进行分析,研究了系泊缆形状、夹角等参数随张力的变化特征,同时系泊缆按照船级社的规范要求进行衡准,反复调整和优化系泊系统的配置和布置方式,直至系泊系统满足要求,最终设计出较合适的系泊系统。相关方法、流程和结论为实际工程项目提供重要的设计思路。 相似文献
20.
水上浮式结构都需要锚固基础来定位.动力锚依靠重力以自由落体的方式安装,是一种自安装锚固基础,具有安装过程简单高效的优点.通过1g模型试验研究了自行研制开发的板型动力锚在斜坡地基上的沉贯过程,分别考虑了基床坡度、锚柄方位和贯入速度对锚最终偏角的影响.结果表明:基床的坡度越大,锚的最终偏角也越大,但基床坡度对动力锚最终偏角影响有限,对动力锚的安装和承载能力影响较小.当贯入速度相同时,锚柄平行坡面时锚的最终偏角最小,锚柄指向坡外时锚的最终偏角最大;当基床坡度相同时,锚的贯入速度越大,锚的最终偏角越小. 相似文献