共查询到18条相似文献，搜索用时 140 毫秒
1.
结合区域构造、地层概况、岩相古地理等方面的背景资料,对宣汉盘龙洞上二叠统长兴组生物礁地层剖面进行了观测描述。通过室内镜下岩石薄片鉴定分析,识别出主要岩石类型为礁灰岩、礁云岩、生屑灰岩、颗粒灰岩及晶粒白云岩。根据露头观察和室内镜下岩石薄片鉴定分析,结合岩石学、古生物等沉积相标志的研究,认为该剖面发育开阔台地、台地边缘生物礁和台地边缘浅滩三种沉积相类型,其中台地边缘生物礁发育,可进一步识别出礁基、礁核和礁前亚相,礁核以骨架礁和障积礁为主;台地边缘浅滩进一步划分为粒屑滩、鲕粒滩等亚相。初步总结出了该剖面的沉积相模式,并对该剖面的沉积演化序列和识别标志进行了讨论。 相似文献
2.
科尔占地区位于滨里海盆地阿斯特拉罕-阿克纠宾斯克隆起带东南部的比伊克扎尔次级隆起上，该地区广泛发育下二叠统孔谷组盐岩，以盐岩沉积为界，它将整个剖面划分为盐上层系（以碎屑岩为主的含油气层系）和盐下层系（以碳酸盐岩为主的含油气层系）两个大的含油气层系，石炭系为盐下层系中主要的含油气层系之一。通过对研究区唯一的盐下井K井岩屑及其薄片的详细观察，并结合该井测井资料，分析了石炭系的沉积特征，并对其沉积相进行了划分与描述。K井石炭系主要发育3种类型沉积相，分别为深水浊积扇相、斜坡相和台地相，其中深水浊积扇相可进一步划分为内扇、中扇和外扇3个亚相，台地相划分为滩间洼地和台内滩2个亚相。利用K井钻探结果，结合区域资料，初步预测出科尔占地区早石炭世和中石炭世末期沉积相带的平面分布特征。 相似文献
3.
4.
青岛近海潮流沉积体系 总被引：2，自引：1，他引：2
通过分析钻孔和浅地层剖面资料,研究了胶州湾及青岛前海潮流沉积体系。该体系包括大沽河-洋河潮控三角洲和与狭口海湾密切相关的涨、落潮流三角洲,潮流作用在各三角洲的形成过程中为主要的沉积动力。前者发育在湾西侧,形成了河口沙坝和分流间湾等沉积相;后者分布在湾口两侧,以潮道和潮流沙脊为主要特征。根据对各沉积相特征的分析,认为潮流沉积体系的演化已整体趋于稳定。 相似文献
5.
方正断陷三维区沉积演化特征 总被引：2，自引：0，他引：2
应用层序地层学分层基础下的沉积学原理,依据各种数据,进行了各级层序单元的识别与划分,在本区识别出扇三角洲相、湖泊相和湖底扇相3类沉积相,进一步划分为8种沉积亚相和16种沉积微相;通过地震相研究及砂体的预测,进行了各层段微相的平面展布特征研究。结果表明研究区主要发育由方正断陷边缘和依汉通断裂向方正断陷中心推进的扇三角洲—湖泊沉积体系。 相似文献
6.
7.
韩春瑞 《海洋地质与第四纪地质》1989,(4)
本文通过对西琛一井晚中新世以来礁相沉积物类型和有孔虫分布的分析,将纵向沉积序列分为9个相段.讨论了各时期沉积相段的碳酸盐矿物和氧、碳稳定同位素组成的变化及它们之间的关系,为研究礁区沉积环境和成岩作用条件的变化、进行区域性礁相沉积地层的划分与对比提供了依据. 相似文献
8.
浅剖和单道地震是大范围研究新近纪以来沉积特征的主要技术方法,由于地震资料分辨率的限制,往往只能划分大的沉积单元,不能识别亚相、微相等,而地震资料的瞬时属性可以更加精细地刻画地层信息。基于2013年在南黄海陆架获得的单道地震资料,对南黄海中西部海域第四系进行了分析,并利用单道资料的三瞬属性对地层进行地震地层单元划分、沉积环境分析,总结出该区域不同沉积相的三瞬波阻特征。研究结果表明,在测线的Qc2钻孔位置处,根据三瞬属性在海底以下74.64m深度内划分了7个地震地层沉积单元,并划分出多个亚相。它所反映的沉积相与该区已知Qc2钻孔的地层对应度较高。瞬时相位较为清楚的显示地下地层的接触情况,更好地展示了地震层序在空间上的关系,解决了该测线在常规地震剖面上无法清晰、精细识别沉积相的问题。三瞬属性的应用可以在缺少钻井资料时提高在地震资料剖面划分地层、识别接触面的能力,为大陆架科学钻探项目中未知井位选址提供参考。 相似文献
9.
《海洋地质与第四纪地质》1991,(3)
部控项目“海南西沙礁相第四纪地质研究”课题负责人张明书,国家自然科学基金项目“中国生物礁比较沉积学研究”课题负责人业治铮。以中新世至晚更新世的生物礁岩石地层剖面为基础,结合碳、氧同位素和地球化学分析资料,阐明了西沙生物礁自中新世初形成以来的沉积地质学问题,反映了我国浅海碳酸盐沉积学、礁地质学等领域的新进展。提交“西沙礁相第四纪地质研究”报告。出版成果;《中国西沙礁相地质图册》及《西沙生物礁碳酸盐沉积地质学研究》两书均由科学出版社出版,《生物礁比较沉积学》专辑,刊登在“海洋地质与第四纪地质”第10卷第二期上。 部控项目“太平洋中部多金属结核的调查与研究”课题负责人许东禹。在太平洋开展了4个航次资源调查的基础上,探讨太平洋中部多金属结核的矿物、化学成分、生长和分布规律及晚新生代古海洋环境及其演化。提交“太平洋中部多金属结核的研究”报告。 相似文献
10.
通过桑沟湾周边海域高分辨率浅地层剖面的地质解译，结合典型钻孔沉积地层的对比分析，揭示了研究区晚更新世以来的层序地层序列。研究表明，桑沟湾周边海域晚更新世以来的地层上覆于基岩之上，自下而上识别出了具有层序意义的3个声学地层单元（SU2、SU1-2、SU1-1），与钻孔的3个沉积地层单元（DU2、DU1-2、DU1-1）对应性良好。桑沟湾周边海域晚更新世以来的层序序列，形成于末次冰盛期低海面时期及早-中全新世高海面以来，自下而上包括低水位体系域（河流-河道充填相沉积）、海侵体系域（潮流沙脊与滨海相沉积）、高水位体系域（浅海相沉积）。研究区低水位体系域受河流下切侵蚀作用，沉积厚度变化较大，介于0～15 m；海侵体系域的沉积厚度普遍介于4.5～5.5 m，分布广泛；高水位体系域由岸向海，自西南至东北沉积厚度逐渐增加，最厚处超过30 m。 相似文献
11.
12.
The well-exposed upper Kimmeridgian carbonate ramp near Arroyo Cerezo, Iberian Basin, Eastern Spain, provides an excellent analog to stratigraphically equivalent subsurface reservoirs, such as the carbonate ramps of the Arab-D of the Middle East and the Smackover of the Gulf of Mexico. Critical questions regarding interwell-scale heterogeneity and correlation motifs for low-angle ramp systems can be addressed using continuous exposures that encompass a full range of inner to outer ramp facies. Outcrops in this area provide a complete exposure of the ramp succession in depositional dip direction.At Arroyo Cerezo, a 40-m thick and 1.3-km long, dip-oriented, continuous outcrop has been studied. Lithofacies and bounding surfaces have been mapped on a continuous photomosaic to build a detailed 2D cross-section, complemented by five stratigraphic sections (∼300 m apart) and petrographic analysis. The reconstructed section shows the facies transition from relative proximal- to distal carbonate ramp settings. Carbonate facies associations are grouped according to the dominant carbonate types: buildup-dominated systems and coated-grain dominated systems. Detailed mapping of facies and bounding surfaces documents distinct ramp depositional units with downdip facies changes occurring within the 1.3 km length of the outcrop. The Arroyo Cerezo outcrop indicates that the ramp-facies continuity, when based on a 5–10 km distance well-log correlation, is mostly apparent. Use of detailed spatial and temporal analysis of high-quality outcrop analogs promotes more realistic models for understanding the interwell, meter-scale heterogeneity. And the scale of these depositional heterogeneities, although being below resolution of subsurface tools, governs in fact (along with diagenetic modifications) the fluid flows within a reservoir. The scale of these stratigraphic heterogeneities needs to be considered in order to optimize and enhance hydrocarbon production and last recovery. 相似文献
13.
Understanding the distribution of natural fractures in sedimentary systems is of high relevance for the exploration and production of fluids in the subsurface. This study focuses on a Kimmeridgian mixed siliciclastic-carbonate ramp system, which is part of the Jurassic limestones outcropping in the northeastern Iberian Chain. The study area is located north of the Ricla village, fifty kilometers southwest of Zaragoza. The outcrop stretches over six kilometers in length, it allows for recording detailed fracture patterns and facies variations. A GIS-based software-package 'DigiFract' is used to measure and digitize fractures in vertical outcrops. Fracture orientation measurements obtained from vertical and horizontal outcrops are used to create a conceptual three-dimensional image of the fracture distribution of the mixed ramp system. The fracture data are processed by integrating outcrop logs and sample-data obtained from thin-sections and rock property analysis. The continuous facies belts of the shallow low-angle ramp system show limited lateral variations. The studied sediments are subdivided in four main facies tracts (FT's): (FT-1) Bioclastic siltstones, (FT-2) alternating sandy limestones and marls, (FT-3) cross-bedded and channelled oolitic-bioclastic sand- and grainstones and (FT-4) coralgal float-to mudstones with eventites. Measured fracture orientations of the vertical and horizontal outcrops are identical throughout the entire exposure. Two main fracture sets are identified, the first set (Set 1) has a N–S direction and the second set (Set 2) has a NE–SW direction. The lateral homogeneity of the sedimentary system, thus facies, layer thickness and slope angle, can be translated to the observed fracture patterns. Within one single facies belt, fractures tend to behave the same in the proximal, middle and distal part of the ramp system. However, vertical facies variations are an important factor for the measured vertical fracture-heterogeneity. Fine-grained mud-supported facies correspond to periods of a sea-level highstand; coarse-grained cemented facies on the other hand are related to a sea-level lowstand. The physical contrast of the sediments caused by sea-level fluctuations forces fractures to solely concentrate in the brittle layers. Fracture density and termination patterns observed on this ramp stand in contrast to fracture geometries observed in flat-topped carbonate platforms. Lateral facies heterogeneity and platform anatomy of flat-topped carbonate platforms are key parameters for the eventual fracture distribution. For the studied mixed ramp-type system the vertical facies variations are key parameter. 相似文献
14.
《Marine and Petroleum Geology》2003,20(6-8):757-787
This paper presents a process-response model for submarine channel-lobe systems based on the integration of sedimentology, architectural element analysis, paleogeographic reconstructions, and stratigraphy to characterize the migration patterns of the channel-lobe transition zone (CLTZ). In the Permian Brushy Canyon basinal cycle, deposition is the product of the basinward then landward migration of the CLTZ across the depositional profile (zonal or facies tract shift). This is expressed in outcrop by the vertical association of sandstone lobes overlain by channel fills capped by sandstone lobes. Linking these sedimentary bodies to their facies associations provides the framework for relating variable degrees of flow confinement to small-scale composite erosional depressions (less than 150 m wide by 5 m deep). This model identifies (1) coeval geomorphological expressions of the depositional profile and (2) the stratigraphic evolution of depositional cycles at every profile position. This permits relating facies associations to lateral and longitudinal changes in flow conditions at the time of deposition. Stacking patterns, geometry of sedimentary bodies and facies associations reflect fluctuations in flow volume and efficiency. Architectural element analysis differentiates evolutionary phases of channel-lobe systems. The power of the model lies in its ability to compare architecture and evolution across several scales of sedimentary bodies. Recognizing the vertical and lateral association of sedimentary bodies, arranged in a hierarchical order, permits understanding how the geomorphological building blocks of this depositional system change through time. Channel-fill, channel-flank and lobe strata represent the building blocks that form composite features documented at four scales. These range from tens of meters to several kilometers wide, by meters to hundreds of meters thick. Areal distribution of sedimentary bodies at each scale responds to specific controls, i.e. flow volume and topography. For example, channels extending basinward of a canyon mouth form local depositional topography that produces lateral migration of channel-lobe systems through time. This strongly controls the frequency of channel avulsion and lateral deposition. 相似文献
15.
从相分析着手,重点剖析京山、崇阳两条岩相剖面,系统地研究了岩石、古生物、地球化学组分及分布规律。在此基础上提出了中扬子二叠系碳酸盐岩岩相模式。二叠系碳酸盐岩属台地碳酸盐岩岩相,包括潮坪、局限台地、台地浅滩、开阔台地A、开阔台地B、边缘浅滩、斜坡等七个次级相。该模式较合理地解释了中扬子二叠系碳酸盐岩的发育规律,并对硅质岩、白云岩的成因提出了新认识。 相似文献
16.
青藏高原羌塘盆地晚侏罗世索瓦期沉积特征研究 总被引：1，自引：0，他引：1
为推进我国石油工业发展丰富石油地质理论,根据野外露头及室内分析化验资料,建立8种相标志,识别出索瓦期沉积相类型有：台地相、台地边缘相、盆地相和海陆过渡相、湖泊相。受北部拉竹龙-金沙江缝合带、中央隆起带和南部班公湖-怒江缝合带的影响,沉积相呈近东西向展布,具南北分带的特点。文章分析了索瓦期的沉积特征,总结了该期的沉积模式。根据研究区的生物特征和沉积特征,推断当时气候是温暖、半干旱的。综合分析认为,索瓦组是羌塘盆地很有潜力的油气勘探目的层,其与上覆雪山组地层可构成有利的含油气组合;而双湖-多涌地区是首选的含油气有利区带。 相似文献
17.
Septriono Hari Nugroho Purna Sulastya Putra Eko Yulianto Dardji Noeradi 《Marine Georesources & Geotechnology》2018,36(8):907-917
A study of sediment dynamics has been conducted on the Tarakan sub-basin, North Kalimantan, Indonesia using multivariate analysis. Multivariate statistical techniques can be used to determine sediment with similar characteristics and be a good proxy to recognize sedimentary facies and depositional environment. These methods have been applied to characterize the sedimentary facies at Tarakan sub-basin. A total of 23 samples were taken from several locations on the different depths of 56–2554?m that represent varieties of environment. The study is interpreted using compositional data analysis associated with a grain size trend analysis (GSTA), principal component analysis (PCA), and cluster analysis (CA). The GSTA value showed the dominance of poorly sorted silt indicating that the sediment is mostly deposited in low-energy depositional. The CA and the PCA determined three distinct sedimentary facies: shelf facies, upper bathyal facies, and lower bathyal facies. The facies were grouped as similar sediment and depositional environment. Sedimentological variables applied in the characterization were described to be an important tool for the interpretation of depositional environments – indirectly showing hydrodynamic energy. 相似文献
18.
It is usually very difficult to identify and quantify the relative influence of tectonics, eustasy and climate on carbonate system evolution from sedimentary records. In order to improve our understanding of these mechanisms, we have traced for the first time, the evolution of the eastern Paris Basin platform throughout the entire Jurassic period. This carbonate platform underwent eight successive growth and demise phases, with different depositional profiles ranging from ramps to flat-topped geometries. The eight carbonate growth periods are compared with the standard sea-level curves, local tectonic regimes and recently published oxygen-isotope and/or clay mineralogy databases. Prograding heterozoan facies along ramp profiles mark periods dominated by second-order eustatic sea-level rise, relatively cool sea surface temperatures, and mesotrophic and humid conditions (Hettangian, Pliensbachian, late Oxfordian, Tithonian). During these periods, variable detrital contents in the sedimentary succession hampered the efficiency of shallow-marine carbonate factories. Higher sea surface temperatures, oligotrophic and humid conditions associated with either eustatic sea-level rise or very high local subsidence occurred during the early Bajocian and the mid-Oxfordian. These seawater properties seem to have favoured the aggradation of scleractinian corals forming dome-shaped bioherm buildups. An oolitic and lime-mud carbonate system, deposited during the Bathonian second-order eustatic sea-level fall, is characterised by miliolid-rich micritic facies on a rimmed-ramp under stable, cooler and drier conditions. The second-order maximum flooding associated with a sea surface temperature decline and/or a seawater eutrophication caused at least five carbonate demise periods (i.e. Toarcian, earliest late Bajocian, Callovian/Oxfordian transition, earliest late Oxfordian and Kimmeridgian). 相似文献