首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Crevillente Fault Zone (CFZ) comprises a system of northeast to southwest oriented dextral faults that extend for some 600 km in the External Zones of the Betic Cordillera (SE Spain). The magnitude of lateral displacement related to this fault zone is not well constrained, and it is considered to be between 20 and 400 km. The stratigraphical and sedimentological criteria used in this work have proven effective in quantifying the magnitude of the displacement along this structure. We have analysed an oolitic turbidite facies in the Middle Jurassic of the Sierra de Ricote (Median Subbetic of Murcia Province). A detailed revision of ooidal limestone outcrops has revealed that the source area of these deposits was to the Internal Subbetic zone, north of Vélez Rubio (Almería Province). These two tectonic units, the Median and Internal Subbetic, are currently 75 km from each other and separated by the CFZ. The conclusions arising from our stratigraphical, petrological and sedimentological studies favour interpretation of a 75–100 km lateral displacement. After restoring the Late Jurassic–Cretaceous anticlockwise rotation of Iberia, the CFZ appears to belong to the E–W palaeofault system that is related to the extension of the South Iberian Continental Margin (SICM). Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

2.
Seismic reflection profiles from three different surveys of the Cascadia forearc are interpreted using P wave velocities and relocated hypocentres, which were both derived from the first arrival travel time inversion of wide-angle seismic data and local earthquakes. The subduction decollement, which is characterized beneath the continental shelf by a reflection of 0.5 s duration, can be traced landward into a large duplex structure in the lower forearc crust near southern Vancouver Island. Beneath Vancouver Island, the roof thrust of the duplex is revealed by a 5–12 km thick zone, identified previously as the E reflectors, and the floor thrust is defined by a short duration reflection from a < 2-km-thick interface at the top of the subducting plate. We show that another zone of reflectors exists east of Vancouver Island that is approximately 8 km thick, and identified as the D reflectors. These overlie the E reflectors; together the two zones define the landward part of the duplex. The combined zones reach depths as great as 50 km. The duplex structure extends for more than 120 km perpendicular to the margin, has an along-strike extent of 80 km, and at depths between 30 km and 50 km the duplex structure correlates with a region of anomalously deep seismicity, where velocities are less than 7000 m s− 1. We suggest that these relatively low velocities indicate the presence of either crustal rocks from the oceanic plate that have been underplated to the continent or crustal rocks from the forearc that have been transported downward by subduction erosion. The absence of seismicity from within the E reflectors implies that they are significantly weaker than the overlying crust, and the reflectors may be a zone of active ductile shear. In contrast, seismicity in parts of the D reflectors can be interpreted to mean that ductile shearing no longer occurs in the landward part of the duplex. Merging of the D and E reflectors at 42–46 km depth creates reflectivity in the uppermost mantle with a vertical thickness of at least 15 km. We suggest that pervasive reflectivity in the upper mantle elsewhere beneath Puget Sound and the Strait of Georgia arises from similar shear zones.  相似文献   

3.
In the Guadix-Baza Basin (Betic Cordillera) lies the Baza Fault, a structure that will be described for the first time in this paper. Eight gravity profiles and a seismic reflection profile, coupled with surface studies, indicate the existence of a NE-dipping normal fault with a variable strike with N-S and NW-SE segments. This 37-km long fault divides the basin into two sectors: Guadix to the West and Baza to the East. Since the Late Miocene, the activity of this fault has created a half-graben in its hanging wall. The seismic reflection profile shows that the fill of this 2,000–3,000 m thick asymmetric basin is syntectonic. The fault has associated seismicity, the most important of which is the 1531 Baza earthquake. Since the Late Tortonian to the present, i.e. over approximately the last 8 million years, extension rates obtained vary between 0.12 and 0.33 mm/year for the Baza Fault, being one of the major active normal faults to accommodate the current ENE–WSW extension produced in the central Betic Cordillera. The existence of this fault and other normal faults in the central Betic Cordillera enhanced the extension in the upper crust from the Late Miocene to the present in this regional compressive setting.  相似文献   

4.
D.M. Mall  P.R. Reddy  W.D. Mooney   《Tectonophysics》2008,460(1-4):116-123
The Central Indian Suture (CIS) is a mega-shear zone extending for hundreds of kilometers across central India. Reprocessing of deep seismic reflection data acquired across the CIS was carried out using workstation-based commercial software. The data distinctly indicate different reflectivity characteristics northwest and southeast of the CIS. Reflections northwest of the CIS predominantly dip southward, while the reflection horizons southeast of the CIS dip northward. We interpret these two adjacent seismic fabric domains, dipping towards each other, to represent a suture between two crustal blocks. The CIS itself is not imaged as a sharp boundary, probably due to the disturbed character of the crust in a 20 to 30-km-wide zone. The time sections also show the presence of strong bands of reflectors covering the entire crustal column in the first 65 km of the northwestern portion of the profile. These reflections predominantly dip northward creating a domal structure with the apex around 30 km northwest of the CIS. There are a very few reflections in the upper 2–2.5 s two-way time (TWT), but the reflectivity is good below 2.5 s TWT. The reflection Moho, taken as the depth to the deepest set of reflections, varies in depth from 41 to 46 km and is imaged sporadically across the profile with the largest amplitude occurring in the northwest. We interpret these data as recording the presence of a mid-Proterozoic collision between two micro-continents, with the Satpura Mobile Belt being thrust over the Bastar craton.  相似文献   

5.
The westernmost Betic Cordillera front is located along the arcuate alpine belt formed by the interaction of the Eurasian‐African plate boundary and the Alboran continental domain in between. Although classical geological data suggest that the western Cordillera front is inactive, recent GPS data show a westward–north‐westward motion of up to 3.4 mm a?1 with respect to the foreland. In addition, the increasing thickness of Guadalquivir sedimentary infill towards the Cordillera, and the rectilinear character of the front formed by soft sediments, suggest that the Cordillera is still active. Large ENE–WSW‐oriented open folds detected in the field, seismic reflection profiles and new audiomagnetotellurics data are consistent with active deformation. Fracture analysis in Quaternary deposits evidences recent NW–SE horizontal compression. The GPS motion and maximum stress orientation may be due to north‐westward tectonic collision of the westernmost Betic Cordillera, accommodated at depth by active continental subduction of the Iberian lithosphere.  相似文献   

6.
The last ca. 20,000 yr of palaeoenvironmental conditions in Podocarpus National Park in the southeastern Ecuadorian Andes have been reconstructed from two pollen records from Cerro Toledo (04°22'28.6"S, 79°06'41.5"W) at 3150 m and 3110 m elevation. Páramo vegetation with high proportions of Plantago rigida characterised the last glacial maximum (LGM), reflecting cold and wet conditions. The upper forest line was at markedly lower elevations than present. After ca. 16,200 cal yr BP, páramo vegetation decreased slightly while mountain rainforest developed, suggesting rising temperatures. The trend of increasing temperatures and mountain rainforest expansion continued until ca. 8500 cal yr BP, while highest temperatures probably occurred from 9300 to 8500 cal yr BP. From ca. 8500 cal yr BP, páramo vegetation re-expanded with dominance of Poaceae, suggesting a change to cooler conditions. During the late Holocene after ca. 1800 cal yr BP, a decrease in páramo indicates a change to warmer conditions. Anthropogenic impact near the study site is indicated for times after 2300 cal yr BP. The regional environmental history indicates that through time the eastern Andean Cordillera in South Ecuador was influenced by eastern Amazonian climates rather than western Pacific climates.  相似文献   

7.
We constructed vertical cross-sections of depth-converted receiver function images to estimate the seismic velocity structure of the crust and uppermost mantle beneath the Kanto district, central Japan. Repeating earthquake data for the plate boundary were also used to estimate geometries of the subducting Philippine Sea plate and the subducting Pacific plate. As a result, we present images of some major seismic discontinuities. The upper boundary of the Pacific plate dips to the northwest in northern Kanto and to the west–southwest in southern Kanto with some undulations. On the other hand, the upper boundary of the Philippine Sea plate as a whole dips to the northwest. However, it is concave to the northeast in the southern Boso peninsula. We suggest that the low-velocity mantle wedge may be indicated on the top of both subducting plates. Plate thickness gradually decreases to the northeast. The northeastern end of the Philippine Sea plate is interpreted to be at depths of 45–90 km. The Moho discontinuity in the overriding plate is deeper than 25 km in the northern Kanto. It contacts the subducting Philippine Sea plate in the southwestern part near 35.8°N.  相似文献   

8.
The Betic-Rif Cordilleras, formed by the interaction of NW–SE convergence between the Eurasian and African plates and the westward motion of their Internal Zones, provide a good example of an active tectonic arc. The Campo de Dalías and Campo de Níjar constitute outcropping sectors of Neogene and Quaternary rocks located in the southeastern border of the Betic Cordilleras and allow us to study the recent deformations developed in the internal border of this tectonic arc.The main active faults with related seismicity, representing a moderate seismic hazard, associated to the southeastern Betic Cordilleras boundary, include high-angle NW–SE-oriented normal faults that affect, at least, the upper part of the crust, a main detachment located at 10 km depth, and probably another detachment at 20 km as well. Seismite structures, recent fault scarps with associated colluvial wedges that deform the drainage network and the alignment of the coastline, indicate that the high-angle faults have been active at least since the Quaternary.Paleostresses determined from microfault analysis in Quaternary deposits generally show an ENE–WSW trend of extension. Present-day earthquake focal mechanisms include normal, strike-slip and reverse faulting. Normal and strike-slip focal mechanisms generally indicate ENE–WSW extension, and strike-slip and reverse focal mechanisms are related to NNW–SSE compression.The maximum horizontal compression has a consistently NNW–SSE trend. The deep activity of detachments and reverse faults determines the NNW–SSE crustal shortening related to the Eurasian–African plate convergence. At surface, however, the predominance of normal faults is probably produced by the increase in the relative weight of the vertical stress axis, which in turn may be related to relief uplift and subsequent horizontal spreading. The internal mountain front boundary of the Betic Cordilleras developed through the activity of a set of structures that is more complex than a typical external mountain front, probably as a consequence of a vertical variable stress field that acted on previously deformed rocks belonging to the Internal Zone of the cordilleras.  相似文献   

9.
Abstract

During the Neogene (uppermost Aquitanian-Lower Burdigalian, Tortonian and Pliocene), three successive marine episodes took place in the present-day Malaga Basin. The first of these affected a wide area of the Belic Internal Zones and was brought to an abrupt conclusion by the westward displacement of these Zones, together with important horizontal movements associated with N70-100 direction strike-slip faults and the superposition of materials from the Campo de Gibraltar. The two other marine episodes were clearly controlled by vertical movements of NW-SE and NK-SW faults, caused by a clear E-W distension which, according to regional data, was associated with some compression in an approximately N-S direction. The area has also been affected, although to a lesser extent, by the uplift of the Betic Cordillera from the Upper Miocene to the present day.  相似文献   

10.
Magnetotelluric (MT) investigations were carried out along a profile in the greenschist–granulite transition zone within the south Indian shield region (SISR). The profile runs over a length of 110 km from Kuppam in the north to Bommidi in the south. It covers the transition zone with 12 MT stations using a wide-band (1 kHz–1 ks) data acquisition system. The Mettur shear zone (MTSZ) forms the NE extension of Moyar–Bhavani shear zone that traverses along the transition zone. The regional geoelectric strike direction of N40°E identified from the present study is consistent with the strike direction of the MTSZ in the center of the profile. The 2-D conductivity model derived from the data display distinct high electrical resistivity character (10,000 Ω m) below the Archaean Dharwar craton and less resistive (< 3000 Ω m) under the southern granulite terrain located south of the MTSZ. The MTSZ separating the two regions is characterized by steep anomalous high conductive feature at lower crustal depths. The deep seismic sounding (DSS) study carried out along the profile shows dipping signatures on either side of the shear zone. The variation of deep electrical resistivity together with the dipping signature of reflectors indicate two distinct terrains, namely, the Archaean Dharwar Craton in the north and the Proterozoic granulite terrain towards south. They got accreted along the MTSZ, which could represent a possible collision boundary.  相似文献   

11.
International Journal of Earth Sciences - Detailed structural analysis in a ca. 80&nbsp;km2 area of the western Nevado-Filabride complex (Betic Cordillera) reveals a heterogeneous internal...  相似文献   

12.
On September 18, 2004, a 4.6 mbLg earthquake was widely felt in the region around Pamplona, at the western Pyrenees. Preliminary locations reported an epicenter less than 20 km ESE of Pamplona and close to the Itoiz reservoir, which started impounding in January 2004. The area apparently lacks of significant seismic activity in recent times. After the main shock, which was preceded by series of foreshocks reaching magnitudes of 3.3 mbLg, a dense temporal network of 13 seismic stations was deployed there to monitor the aftershocks series and to constrain the hypocentral pattern. Aftershock determinations obtained with a double-difference algorithm define a narrow epicentral zone of less than 10 km2, ESE–WNW oriented. The events are mainly concentrated between 3 and 9 km depth. Focal solutions were computed for the main event and 12 aftershocks including the highest secondary one of 3.8 mbLg. They show mainly normal faulting with some strike-slip component and one of the nodal planes oriented NW–SE and dipping to the NE. Cross-correlation techniques applied to detect and associate events with similar waveforms, provided up to 33 families relating the 67% of the 326 relocated aftershocks. Families show event clusters grouped by periods and migrating from NW to SE. Interestingly, the narrow epicentral zone inferred here is located less than 4 km away from the 111-m high Itoiz dam. These hypocentral results, and the correlation observed between fluctuations of the reservoir water level and the seismic activity, favour the explanation of this foreshock–aftershock series as a rapid response case of reservoir-triggered seismicity, burst by the first impoundment of the Itoiz reservoir. The region is folded and affected by shallow dipping thrusts, and the Itoiz reservoir is located on the hangingwall of a low angle southward verging thrust, which might be a case sensible to water level fluctuations. However, continued seismic monitoring in the coming years is mandatory in this area to infer more reliable seismotectonic and hazard assessments.  相似文献   

13.
The eastern margin of the Variscan belt in Europe comprises plate boundaries between continental blocks and terranes formed during different tectonic events. The crustal structure of that complicated area was studied using the data of the international refraction experiments CELEBRATION 2000 and ALP 2002. The seismic data were acquired along SW–NE oriented refraction and wide-angle reflection profiles CEL10 and ALP04 starting in the Eastern Alps, passing through the Moravo-Silesian zone of the Bohemian Massif and the Fore-Sudetic Monocline, and terminating in the TESZ in Poland. The data were interpreted by seismic tomographic inversion and by 2-D trial-and-error forward modelling of the P waves. Velocity models determine different types of the crust–mantle transition, reflecting variable crustal thickness and delimiting contacts of tectonic units in depth. In the Alpine area, few km thick LVZ with the Vp of 5.1 km s− 1 dipping to the SW and outcropping at the surface represents the Molasse and Helvetic Flysch sediments overthrust by the Northern Calcareous Alps with higher velocities. In the Bohemian Massif, lower velocities in the range of 5.0–5.6 km s− 1 down to a depth of 5 km might represent the SE termination of the Elbe Fault Zone. The Fore-Sudetic Monocline and the TESZ are covered by sediments with the velocities in the range of 3.6–5.5 km s− 1 to the maximum depth of 15 km beneath the Mid-Polish Trough. The Moho in the Eastern Alps is dipping to the SW reaching the depth of 43–45 km. The lower crust at the eastern margin of the Bohemian Massif is characterized by elevated velocities and high Vp gradient, which seems to be a characteristic feature of the Moravo-Silesian. Slightly different properties in the Moravian and Silesian units might be attributed to varying distances of the profile from the Moldanubian Thrust front as well as a different type of contact of the Brunia with the Moldanubian and its northern root sector. The Moho beneath the Fore-Sudetic Monocline is the most pronounced and is interpreted as the first-order discontinuity at a depth of 30 km.  相似文献   

14.
A temporal seismic network recorded local seismicity along a 130 km long segment of the transpressional dextral strike-slip Liquiñe-Ofqui fault zone (LOFZ) in southern Chile. Seventy five shallow crustal events with magnitudes up to Mw 3.8 and depths shallower than 25 km were observed in an 11-month period mainly occurring in different clusters. Those clusters are spatially related to the LOFZ, to the volcanoes Chaitén, Michinmahuida and Corcovado, and to active faulting on secondary faults. Further activity along the LOFZ is indicated by individual events located in direct vicinity of the surface expression of the LOFZ. Focal mechanisms were calculated using deviatoric moment tensor inversion of body wave amplitude spectra which mostly yield strike-slip mechanisms indicating a NE–SW direction of the P-axis for the LOFZ at this latitude. The seismic activity reveals the present-day activity of the fault zone. The recent Mw 6.2 event near Puerto Aysén, Southern Chile at 45.4°S on April 21, 2007 shows that the LOFZ is also capable of producing large magnitude earthquakes and therefore imposing significant seismic hazard to this region.  相似文献   

15.
The origin of regional sedimentary basins is being investigated by the ESTRID project (Explosion Seismic Transects around a Rift In Denmark). This project investigates the mechanisms of the formation of wide, regional basins and their interrelation to previous rifting processes in the Danish–Norwegian Basin in the North Sea region. In May 2004 a 143 km long refraction seismic profile was acquired along the strike direction of a suspected major mafic intrusion in the crust in central Denmark. The data confirms the presence of a body with high seismic velocity (> 6.5 km/s) extending from a depth of  10–12 km depth into the lower crust. There is a remarkable Moho relief between 27 and 34 km depth along this new along-strike profile as based on ray-tracing modelling of PmP reflections. The lack of PmP reflections at a zone of very high velocity in the lowest crust (7.3–7.5 km/s) suggests a possible location of a feeder channel to the batholith. The presence of volcanic rocks of Carboniferous–Permian age above the intrusion (mafic batholith) suggests a similar age of the intrusion. An older obliquely crossing profile and two new fan profiles deployed perpendicular to the main ESTRID profile, show that the batholith is about 30–40 km wide. The existence of this large mafic batholith supports the hypothesis that the origin of the Danish–Norwegian Basin is related to cooling and contraction after intrusion of large amounts of mafic melts into the crust during the late Carboniferous and early Permian. The data and interpretations from project ESTRID will form the basis for subsidence modelling. Tentatively, we interpret the formation of the Danish–Norwegian Basin as a thermal subsidence basin, which developed after widespread rifting of the region.  相似文献   

16.
Ultrashallow P-wave seismic reflection experiments were conducted at a model test site and in a trenched shallow fault zone along the Chelunpu fault line. The field layout was designed to have the shallowest undistorted reflection from about 1 m depth with 0.5 m vertical resolution. The smallest group interval tested in this study was 0.05 m with a 0.25 ms sample interval, which can avoid spatial aliasing of ground roll if the target is very shallow and the velocities are low. Data processing was designed to be simple but consistent. As the ultrashallow reflections may be contaminated with high-amplitude coherent noise in many aspects, first break muting and surgical muting were performed on each file as detailed as possible, and f–k filtering was applied mainly for the purpose of attenuating the aliasing energy and back-scattered noise. Data acquired in this study show that the low P-wave velocities (< 200 m/s) and high dominant frequencies (120–200 Hz) of near-surface layers may have a potential vertical resolution of 0.4 m or even better.Comparing the test profile with the ground-penetrating radar (GPR) control profile of the same test site and correlating the results obtained from the study site with those of the geologic cross-section of the trench, this experiment demonstrates the possibility of using seismic methods in investigating shallow structures at depths of less than a few meters with vertical resolution comparable to the GPR technique.  相似文献   

17.
Arrival-times of local events recorded in northern Chile and southern Bolivia were used to determine the P velocity structure above the subducted Nazca plate. The data were recorded between June and November 1994 by the French “Lithoscope” network: 41 vertical and 14 three-component short-period seismic stations were installed along a 700 km long profile crossing the main structures of the Andean chain, from the Coastal Cordillera to the Subandean Zone. The inversion method used is a modified version of Thurber’s 3D iterative simultaneous inversion code. The results were compared with a model obtained from previous German nearby refraction seismic studies and supplemented by field geological observations.The relocated seismicity is consistent with an ∼30° dipping slab between 0 and 170 km depth. We found a variation of about 30 km of the Moho depth along the profile. The crustal thickness is about 47 km under the Coastal Cordillera, 70 km under the Western Cordillera and the western part of the Eastern Cordillera, and 60–65 km beneath the Altiplano. Close to the surface, a good agreement between the velocity model and the geological structures is observed. Generally, in the upper crust, high velocities coincide with zones where basement is present near the surface. Low velocities are well correlated with the presence of very thick sedimentary basins or volcanic material. At greater depth, the trend of the velocity model is consistent with the existence of asymmetrical west-dipping imbricated blocks, overthrusting toward the east, which explain the asymmetrical pattern of the sedimentary basins. Beneath the Western Cordillera, the active volcanic arc, a large zone of low velocity is observed and interpreted to be due to partially molten material. A clear velocity contrast appears between the western and eastern parts of the upper mantle beneath the Andes; this geometry suggests the existence of a low velocity wedge in the mantle above the slab and the presence of a thick old lithosphere in the eastern part of the Andes.  相似文献   

18.
The 1000-km-long Darlag–Lanzhou–Jingbian seismic refraction profile is located in the NE margin of the Tibetan plateau. This profile crosses the northern Songpan-Ganzi terrane, the Qinling-Qilian fold system, the Haiyuan arcuate tectonic region, and the stable Ordos basin. The P-wave and S-wave velocity structure and Poisson's ratios reveal many significant characteristics in the profile. The crustal thickness increases from northeast to southwest. The average crustal thickness observed increases from 42 km in the Ordos basin to 63 km in the Songpan-Ganzi terrane. The crust becomes obviously thicker south of the Haiyuan fault and beneath the West-Qinlin Shan. The crustal velocities have significant variations along the profile. The average P-wave velocities for the crystalline crust vary between 6.3 and 6.4 km/s. Beneath the Songpan-Ganzi terrane, West-Qinling Shan, and Haiyuan arcuate tectonic region P-wave velocities of 6.3 km/s are 0.15 km/s lower than the worldwide average of 6.45 km/s. North of the Kunlun fault, with exclusion of the Haiyuan arcuate tectonic region, the average P-wave velocity is 6.4 km/s and only 0.5 km/s lower than the worldwide average. A combination of the P-wave velocity and Poisson's ratio suggests that the crust is dominantly felsic in composition with an intermediate composition at the base. A mafic lower crust is absent in the NE margin of the Tibetan plateau from the Songpan-Ganzi terrane to the Ordos basin. There are low velocity zones in the West-Qinling Shan and the Haiyuan arcuate tectonic region. The low velocity zones have low S-wave velocities and high Poisson's ratios, so it is possible these zones are due to partial melting. The crust is divided into two layers, the upper and the lower crust, with crustal thickening mainly in the lower crust as the NE Tibetan plateau is approached. The results in the study show that the thickness of the lower crust increases from 22 to 38 km as the crustal thickness increases from 42 km in the Ordos basin to 63 km in the Songpan-Ganzi terrane south of the Kunlun fault. Both the Conrad discontinuity and Moho in the West-Qinling Shan and in the Haiyuan arcuate tectonic region are laminated interfaces, implying intense tectonic activity. The arcuate faults and large earthquakes in the Haiyuan arcuate tectonic region are the result of interaction between the Tibetan plateau and the Sino–Korean and Gobi Ala Shan platforms.  相似文献   

19.
Two different models of the structure of the Icelandic crust have been presented. One is the thin-crust model with a 10–15 km thick crust beneath the axial rift zones, with an intermediate layer of partially molten basalt at the base of the crust and on the top of an up-domed asthenosphere. The thick-crust model assumes a 40 km thick and relatively cold crust beneath central Iceland. The most important and crucial parameter to distinguish between these different models is the temperature distribution with depth. Three methods are used to estimate the temperature distribution with depth. First, the surface temperature gradient measured in shallow wells drilled outside geothermal areas. Second, the thickness of the seismogenic zone which is associated with a 750 °C isothermal surface. Third, the depth to a layer with high electrical conductivity which is associated with partially molten basalt with temperature around 1100 °C at the base of the crust. Combination of these data shows that the temperature gradient can be assumed to be nearly linear from the surface down to the base of the crust. These results are strongly in favour of the thin-crust model. The scattered deep seismic reflectors interpreted as Moho in the thick-crust model could be caused by phase transitions or reflections from melt pockets in the mantle.  相似文献   

20.
Neotectonic evolution of the Central Betic Cordilleras (Southern Spain)   总被引：1，自引：0，他引：1  
Paleostress orientations were calculated from fault-slip data of 36 sites located along a traverse through the Central Betic Cordilleras (southern Spain). Heterogeneous fault sets, which are frequent in the area, have been divided into homogeneous subsets by cross-cutting relationships observed in the field and by a paleostress stratigraphy approach applied on each individual fault population. The state of stress was sorted according to main tectonic events and a new chronology is presented of the Miocene to Recent deformation in the central part of the Betic Cordilleras. The deviatoric stress tensors fall into four distinct groups that are regionally consistent and correlate with three Late Oligocene–Aquitanian to Recent major tectonic events in the Betic Cordilleras. The new chronology of the neotectonic evolution includes, from oldest to youngest, the following main tectonic phases:
(1) Late Oligocene–Aquitanian to Early Tortonian: σ1 subhorizontal N–S, partly E–W directed, σ3 subvertical; compressional structures (thrusting of nappes, large-scale folding) and strike-slip faulting in the Alborán Domain and the External Zone of the Betic Cordilleras;
(2) Early Tortonian to Pliocene–Pleistocene: σ1 subvertical, σ3 subhorizontal NW–SE, partly N–S directed or E–W-directed (radial extension); large-scale normal faulting in the Central Betic Cordilleras and in the oldest Neogene formations of the Granada Basin related to the gravitational collapse of the Betic Cordilleras and the exhumation of the intensely metamorphosed rock series of the Internal Zones, at the same time formation of the Alborán Basin and intramontane basins such as the Granada Basin;
(3) Pleistocene to Recent: (3a) σ1 subvertical, σ3 subhorizontal NE–SW with prominent normal faulting, but coevally; (3b) σ1 subhorizontal NW directed, σ3 NE–SW subhorizontal with strike-slip faulting. Extensional structures and strike-slip faulting are related to the ongoing convergence of the Eurasian and African Plates and coeval uplift of the Betic Cordilleras. Reactivation of pre-existing fractures and faults was frequently observed. Phase 3 is interpreted as periodic strike-slip and normal faulting events due to a permutation of the principal stress axes, mainly σ1 and σ2.
Keywords: Neotectonics; Paleostress; Fault-slip data; Deformation history; Betic Cordilleras  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号