共查询到20条相似文献，搜索用时 718 毫秒
1.
The European-Mediterranean earthquake catalogue from 1901 to 1985, which comprises uniformly determined magnitudes MS and mB(h ≥ 60 km) of 13300 events, was used in the study of cumulative magnitude-frequency relationships Nc(M) compiled for 75 earthquake regions and 25 larger provinces. In the whole magnitude range observed, the Gutenberg-Richter formula log Nc(M) = a − bM very rarely fits the cumulative (log Nc, M) distributions. The b-values of log-linear segments of Nc(M) vary regionally from b = 0.7 to b = 1.3; averaging of all values leads to
(shallow events, MS and
).
Most distributions pertain to the Mediterranean area (b = 0.86 from the graph for shallow events) and many of them indicate the existence of characteristic earthquakes in accordance with the theoretical single-fault model. Other observed shapes of Nc(M) can be explained by the superposition of populations of different Mmax values or by the presence of swarm-type activity. The observed Nc(M) distributions depend very much on the delineation of earthquake regions i.e. on the number and dimension of seismoactive faults in the investigated region.
A premonitory enhancement of medium earthquake activity (M = 4.5–5.5) can be observed only very rarely. 相似文献
2.
Garnet–melt trace element partitioning experiments were performed in the system FeO–CaO–MgO–Al2O3–SiO2 (FCMAS) at 3 GPa and 1540°C, aimed specifically at studying the effect of garnet Fe2+ content on partition coefficients (DGrt/Melt). DGrt/Melt, measured by SIMS, for trivalent elements entering the garnet X-site show a small but significant dependence on garnet almandine content. This dependence is rationalised using the lattice strain model of Blundy and Wood [Blundy, J.D., Wood, B.J., 1994. Prediction of crystal–melt partition coefficients from elastic moduli. Nature 372, 452–454], which describes partitioning of an element i with radius ri and valency Z in terms of three parameters: the effective radius of the site r0(Z), the strain-free partition coefficient D0(Z) for a cation with radius r0(Z), and the apparent compressibility of the garnet X-site given by its Young's modulus EX(Z). Combination of these results with data in Fe-free systems [Van Westrenen, W., Blundy, J.D., Wood, B.J., 1999. Crystal-chemical controls on trace element partitioning between garnet and anhydrous silicate melt. Am. Mineral. 84, 838–847] and crystal structure data for spessartine, andradite, and uvarovite, leads to the following equations for r0(3+) and EX(3+) as a function of garnet composition (X) and pressure (P):Accuracy of these equations is shown by application to the existing garnet–melt partitioning database, covering a wide range of P and T conditions (1.8 GPa<P<5.0 GPa; 975°C<T<1640°C). DGrt/Melt for all 3+ elements entering the X-site (REE, Sc and Y) are predicted to within 10–40% at given P, T, and X, when DGrt/Melt for just one of these elements is known. In the absence of such knowledge, relative element fractionation (e.g. DSmGrt/Melt/DNdGrt/Melt) can be predicted. As an example, we predict that during partial melting of garnet peridotite, group A eclogite, and garnet pyroxenite, r0(3+) for garnets ranges from 0.939±0.005 to 0.953±0.009 Å. These values are consistently smaller than the ionic radius of the heaviest REE, Lu. The above equations quantify the crystal-chemical controls on garnet–melt partitioning for the REE, Y and Sc. As such, they represent a major advance en route to predicting DGrt/Melt for these elements as a function of P, T and X. 相似文献
r0(3+) [Å]=0.930XPy+0.993XGr+0.916XAlm+0.946XSpes+1.05(XAnd+XUv)−0.005(P [GPa]−3.0)(±0.005 Å)
EX(3+) [GPa]=3.5×1012(1.38+r0(3+) [Å])−26.7(±30 GPa)
3.
Upper Pollara eruption products (13 ka, Salina Island, Italy) include both homogeneous and heterogeneous pumices resulting from mixing/mingling processes between an HK andesite and a high-SiO2 rhyolite. Representative samples of heterogeneous pumices are collected and analyzed in order to check the correspondence between glass composition and morphological features of the mingling/mixing structures. Image analysis techniques are applied and eight grey color ranges (classes) are extracted from high-resolution scans of pumice. Class 1 (lighter colors) and class 8 (darker colors) show end-member glass compositions, i.e. HK andesite and high-SiO2 rhyolite, respectively. These two classes show spot- to cluster-like morphological structures. Intermediate classes show an HK dacitic to rhyolitic composition and a banding- to fold-like morphology. Fractal analysis by box-counting of the boundary pattern of eight grey classified images is performed over a length scale of 0.028–1.8 cm. Fractal dimension D is between 1.01 and 1.84. Coupled fractal analysis and geochemical data reveal that D increases as the degree of magma interaction (homogenization) increases. This feature well fits the results from numerical models on the convective mixing of fluids driven by thermal convection. We conclude that the increase of D observed in the Upper Pollara samples reflects the transition from fractal mixing to homogenization. End-member magmas (HK andesite and high-SiO2 rhyolite) represent isolated mixing regions, while homogenized magmas represent active mixing regions. In the analyzed pumices, isolated and active mixing regions coexist at scales between 10−4 and 10−2 m. Morphological and compositional features of the Upper Pollara pumices result from turbulence. 相似文献
4.
沟谷地形下高填方涵洞土压力分布规律较为复杂,不同沟谷地形下涵周土压力分布规律与上埋式涵洞差异显著。为探明沟谷地形对高填方拱涵涵周土压力的影响,采用离心模型试验与数值模拟方法,建立了地形-涵洞-填土的相互作用模型,分析了不同沟谷宽度B、沟谷坡度α下的拱涵涵周土压力及涵顶土压集中系数Ks的分布规律,并与最新涵洞设计规范进行了对比,阐述了沟谷地形下高填方拱涵土压力形成机制。研究表明：（1）沟谷宽度B对涵顶土压力集中系数Ks影响显著,沟谷宽度B为4D～6D,D为拱涵的净跨径,涵顶土压力集中系数Ks增幅较大;（2）沟谷宽度B小于4D时,可发挥沟谷地形对涵洞的减载作用;（3）沟谷坡度α在45°～60°时,涵顶土压力及其Ks变化最显著;（4）填土高度为20m,α>70°时,Ks≤1。填土高度为40m,α>50°时,Ks≤1;(5)我国最新涵洞设计规范推荐的Ks与离心模型试验、数值模拟规律存在一定差异,当α=45°时,沟谷宽度B较小时,规范的涵顶土压力集中系数Ks较为保守;（6）沟谷地形下高填方拱涵Ks与拱顶压密区、等压面的形成有关。拱顶压密区可引起拱涵涵顶土压力集中,并引起压密区周边土体... 相似文献
5.
Scaling properties of landslides in the Rif mountains of Morocco 总被引：2，自引：0，他引：2
Landslides in the central Rif mountains (Morocco) were analyzed by multifractal analysis. Our results suggest that spatial distribution of landslides in the region is not a homogeneous fractal structure but a heterogeneous one with generalized dimensions D(1)=1.713>D(2)>…>D(12)=1.325. The value of D(12)=D(∞) is the fractal dimension of the most intensive clustering in the heterogeneous fractal set. It is worthwhile to note that we found D(0)<D(1). The analysis of areas affected by sliding from the geological map of Beni Ahmed at a scale 1:50 000 shows the power law size distribution: N(A>a)∝a−1.57. This confirms the scale invariance of sliding and suggests that real landslides may exhibit a Self-Organized Criticality (SOC) behaviour. 相似文献
6.
人类活动引起的我国西北地区21世纪温度和降水变化情景分析 总被引：42，自引：7，他引：35
使用IPCCWG1第三次科学评估报告中给出的7个全球气候系统模式的模拟预测结果,分析了人类活动对中国西北地区气候变化的影响.模拟结果表明,由于温室气体增加(GG)或温室气体与硫化物气溶胶(GS)增加,21世纪西北地区气温将可能平均变暖42～60℃·100a-1.降水的变化较为复杂,由于温室气体的影响,未来西北地区降水将增加;考虑温室气体和硫化物气溶胶的共同影响,则略有增加.模式平均结果表明,未来西北地区降水将可能增加15～39mm·100a-1. 相似文献
7.
The fractal dimension of pores in sedimentary rocks and its influence on permeability 总被引：2，自引：0，他引：2
E. M. Schlueter R. W. Zimmerman P. A. Witherspoon N. G. W. Cook 《Engineering Geology》1997,48(3-4):199-215
Perimeter-area power-law relationship of pores in five sedimentary rocks are estimated from scanning electron micrographs of thin sections. These relationships for the pores of four sandstones were found to lie between 1.43 and 1.49, while that of an Indiana limestone was found to be 1.67. We show how the perimeter-area power-law relationship of pores, along with a pore-size distribution, can be used to estimate the hydraulic permeability. A discussion is given of how the fractal dimension of the pore perimeter derived by Mandelbrot for islands whose boundaries are fractal: P = εDAD/2, where ε is some constant that depends on the length of the measuring grid size and D is the fractal dimension of the pore perimeter, influences permeability. 相似文献
8.
作为计算太阳总辐射(Rs)的主要公式,Angstrom公式参数(a、b)的合理取值是计算参照腾发量(ET0)的重要前提。针对FAO所提出的a、b建议值(a=0.25、b=0.5)在中国无辐射观测资料地区被大量使用,而其合理性尚未得到系统评价的情况,基于中国104个地面站的观测数据,在逐月时间尺度上,讨论了a、b变化对ET0的影响,分析了a、b的地区分布规律,评价了FAO建议值所导致的ET0计算误差,进而阐明了该建议值在中国7个区域的适用性。提出了无辐射资料情况下a、b的地区综合取值方法。主要研究结论是:①参数a、b偏差对ET0的计算有重要影响,在中国无资料地区采用FAO建议值将导致较大的太阳总辐射(Rs)和ET0计算误差。②大多数站点,a的率定值较FAO建议值明显偏小,而b的率定值明显偏大。新疆地区和华南地区a、b率定值分布比较集中,而在其它区域比较分散。③FAO建议参数值在东北、西北和新疆3个区域计算ET0的适用性较好,而在西南和华南两个区域的适用性很差,计算的ET0偏高较大。④提出的地区综合取值方法,能使Rs和ET0的计算精度较FAO建议值显著提高。 相似文献
9.
Partitioning coefficients between olivine and silicate melts 总被引：3，自引：0，他引：3
J.H. Bdard 《Lithos》2005,83(3-4):394-419
Variation of Nernst partition coefficients (D) between olivine and silicate melts cannot be neglected when modeling partial melting and fractional crystallization. Published natural and experimental olivine/liquidD data were examined for covariation with pressure, temperature, olivine forsterite content, and melt SiO2, H2O, MgO and MgO/MgO + FeOtotal. Values of olivine/liquidD generally increase with decreasing temperature and melt MgO content, and with increasing melt SiO2 content, but generally show poor correlations with other variables. Multi-element olivine/liquidD profiles calculated from regressions of D REE–Sc–Y vs. melt MgO content are compared to results of the Lattice Strain Model to link melt MgO and: D0 (the strain compensated partition coefficient), EM3+ (Young's Modulus), and r0 (the size of the M site). Ln D0 varies linearly with Ln MgO in the melt; EM3+ varies linearly with melt MgO, with a dog-leg at ca. 1.5% MgO; and r0 remains constant at 0.807 Å. These equations are then used to calculate olivine/liquidD for these elements using the Lattice Strain Model. These empirical parameterizations of olivine/liquidD variations yield results comparable to experimental or natural partitioning data, and can easily be integrated into existing trace element modeling algorithms. The olivine/liquidD data suggest that basaltic melts in equilibrium with pure olivine may acquire small negative Ta–Hf–Zr–Ti anomalies, but that negative Nb anomalies are unlikely to develop. Misfits between results of the Lattice Strain Model and most light rare earth and large ion lithophile partitioning data suggest that kinetic effects may limit the lower value of D for extremely incompatible elements in natural situations characterized by high cooling/crystallization rates. 相似文献
10.
The seismic characteristic of Hindukush–Pamir–Himalaya (HPH) and its vicinity is very peculiar and has experienced many widely distributed large earthquakes. Recent work on the time-dependent seismicity in the Hindukush–Pamir–Himalayas is mainly based on the so-called “regional time-predictable model”, which is expressed by the relation log T=cMp+a, where T is the inter-event time between two successive main shocks of a region and Mp is the magnitude of the preceded main shock. Parameter a is a function of the magnitude of the minimum earthquake considered and of the tectonic loading and c is positive (0.3) constant. In 90% of the cases with sufficient data, parameter c was found to be positive, which strongly supports the validity of the model. In the present study, a different approach, which assumes no prior regionalization of the area, is attempted to check the validity of the model. Nine seismic sources were defined within the considered region and the inter-event time of strong shallow main shock were determined and used for each source in an attempt at long-term prediction, which show the clustering and occurrence of at least three earthquakes of magnitude 5.5≤Ms≤7.5 giving two repeat times, satisfying the necessary and sufficient conditions of time-predictable model (TP model). Further, using the global applicability of the regional time- and magnitude-predictable model, the following relations have been obtained: log Tt=0.19 Mmin+0.52Mp+0.29 log m0−10.63 and Mf=1.31Mmin−0.60Mp−0.72 log m0+21.01, where Tt is the inter-event time, measured in years; Mmin the surface wave magnitude of the smallest main shock considered; Mp the magnitude of preceding main shock; Mf the magnitude of the following main shock; and m0 the moment rate in each source per year.
These relations may be used for seismic hazard assessment in the region. Based on these relations and taking into account the time of occurrence and the magnitude of the last main shock in each seismogenic source, time-dependent conditional probabilities for the occurrence of the next large (Ms≥5.5) shallow main shocks during the next 20 years as well as the magnitudes of the expected main shocks are determined. 相似文献
11.
12.
Status report on stability of K-rich phases at mantle conditions 总被引：1，自引：0，他引：1
Experimental research on K-rich phases and observations from diamond inclusions, UHP metamorphic rocks, and xenoliths provide insights about the hosts for potassium at mantle conditions. K-rich clinopyroxene (Kcpx–KM3+Si2O6) can be an important component in clinopyroxenes at P>4 GPa, dependent upon coexisting K-bearing phases (solid or liquid) but not, apparently, upon temperature. Maximum Kcpx content can reach 25 mol%, with 17 mol% the highest reported in nature. Partitioning (K)D(cpx/liquid) above 7 GPa=0.1–0.2 require ultrapotassic liquids to form highly potassic cpx or critical solid reactions, e.g., between Kspar and Di. Phlogopite can be stable to about 8 GPa at 1250 °C where either amphibole or liquid forms. When fluorine is present, it generally increases in Phl upon increasing P (and probably T) to about 6 GPa, but reactions forming amphibole and/or KMgF3 limit F content between 6 and 8 GPa. The perovskite KMgF3 is stable up to 10 GPa and 1400 °C as subsolidus breakdown products of phlogopite upon increasing P. (M4)K-substituted potassic richterite (ideally K(KCa)Mg5Si8O22(OH,F)2) is produced in K-rich peridotites above 6 GPa and in Di+Phl from 6 to 13 GPa. K content of amphibole is positively correlated with P; Al and F content decrease with P. In the system 1Kspar+1H2O K-cymrite (hydrous hexasanidine–KAlSi3O8·nH2O–Kcym) is stable from 2.5 GPa at 400 to 1200 °C and 9 GPa; Kcym can be a supersolidus phase. Formation of Kcym is sensitive to water content, not forming within experiments with H2O2O>Kspar. Phase X, a potassium di-magnesium acid disilicate ((K1−x−n)2(Mg1−nMn3+)2Si2O7H2x), forms in mafic compositions at T=1150–1400 °C and P=9–17 GPa and is a potential host for K and H2O at mantle conditions with a low-T geotherm or in subducting slabs. The composition of phase-X is not fixed but actually represents a solid solution in the stoichiometries □2Mg2Si2O7H2–(K□)Mg2Si2O7H–K2Mg2Si2O7 (□=vacancy), apparently stable only near the central composition. K-hollandite, KAlSi3O8, is possibly the most important K-rich phase at very high pressure, as it appears to be stable to conditions near the core–mantle boundary, 95 GPa and 2300 °C. Other K-rich phases are considered. 相似文献
13.
D.J. Cherniak 《Geochimica et cosmochimica acta》1996,60(24):5037-5043
Strontium chemical diffusion has been measured in albite and sanidine under dry, 1 atm, and QFM buffered conditions. Strontium oxide-aluminosilicate powdered sources were used to introduce the diffusant and Rutherford Backscattering Spectroscopy (RBS) used to measure diffusion profiles. For the 1 atm experiments, the following Arrhenius relations were obtained: The alkali feldspars in this and earlier work display a broad range of activation energies for Sr diffusion, which may be a consequence of the thermodynamic non-ideality of the alkali feldspar system and/or the mixed alkali effect. 相似文献
Sanidine (Or61), temperature range 725–1075°C, diffusion normal to (001): D=8.4 exp(−450±13 kJ mol−1/RT) m2s−1. Albite (Or1), temperature range 675–1025°C, diffusion normal to (001): D=2.9 × exp(−224±11 kJ mol−1/RT) m2s−1.
14.
为研究海相含煤地层页岩的微观孔隙特征,选取黔西北地区石炭系祥摆组页岩作为研究对象,利用扫描电镜(SEM)和液氮吸附实验研究孔隙特征,同时研究其分形特征,并探讨孔隙结构的影响因素。研究结果表明:研究区石炭系祥摆组页岩在扫描电镜下可观察到4类微观孔隙(粒内孔、粒间孔、有机质孔、微裂缝),其中微裂缝、有机质孔发育较丰富,具有较强的生成烃类气体能力和良好的储集性能;液氮吸附等温线在形态上呈反“S”形,表明中孔在微观孔隙中最为发育,滞后回线类型主要为H2型的细颈广体的墨水瓶孔;BJH总孔体积和BET比表面积值均较大,平均值分别为0.0155 cm3/g和13.20 m2/g,平均孔径为6.22 nm,纳米级微观孔隙大量发育,为烃类气体提供丰富的储集空间;页岩样品微观孔隙结构分形维数D较大,主体大于2.723 2,反映出孔隙结构复杂、非均质性较强;BET比表面积与TOC、石英含量呈一定的负相关性,与分形维数呈一定的正相关性;平均孔径值与石英含量正相关性较好,与分形维数负相关性较好,与黏土矿物含量呈一定的负相关性。石炭系祥摆组页岩微观孔隙的BET比表面积较大、平均孔径较小,微观孔隙结构较为复杂。 相似文献
15.
Box fractal dimension as a measure of statistical homogeneity of jointed rock masses 总被引：2，自引：0，他引：2
Pinnaduwa H. S. W. Kulatilake Reno Fiedler Bibhuti B. Panda 《Engineering Geology》1997,48(3-4):217-229
A written computer programme to estimate the box fractal dimension (DB) is verified by estimating DB of the triadic Koch curve for which the theoretical D is known. The influence of a number of input parameters of the box-counting method on the accuracy of estimated DB is evaluated using the same Koch curve. The employed size range of the applied box networks was found to be the parameter which has the strongest influence on the accuracy of estimated DB. This indicated the importance of finding the range of self-similarity or self-affinity for the object considered to select the proper range for the box sizes and, in turn, to obtain accurate estimates of DB. By calculating DB for different block sizes sampled from three generated two-dimensional joint patterns, it is shown that DB can capture the combined effect of joint-size distribution and joint density on the statistical homogeneity of rock masses. The spatial variation of DB along a 350 m stretch of a tunnel in the shiplock area of the Three Gorges dam site is computed using the joint data mapped on the walls and the roof of the tunnel. This spatial variation of DB is used, along with the visual geological evaluation of the joint trace maps of the tunnel, in making decisions about statistical homogeneity of the rock mass around the tunnel. The results obtained on statistically homogeneous regions were found to be quite similar to the results obtained from a previous statistical homogeneity investigation which incorporated the effect of number of joint sets and their orientation distributions, but not the spatial variation of DB. It is recommended that the spatial variation of DB is used, along with the results of other methods such as contingency table analysis and equal area plots, which incorporate the effect of joint orientation distribution, in addition to the geology of the site, in determining the statistically homogeneous regions of jointed rock masses. 相似文献
16.
采用刚性滑块构建两种圆形隧道失稳环向开挖面破坏模式,利用编制的非线性规划程序求解隧道失稳环向开挖面支护力系数σT /c（σT为均布支护荷载,c为有效黏聚力）最优上限解及地层破坏模式,揭示地层参数对隧道稳定性的影响,提出简单实用的极限支护力简化公式。研究结果表明：不排水条件下,当隧道埋深比H/D（H为埋深,D为隧道直径）和重度系数γD/c（γ 为重度）较小时,破坏区域主要集中在隧道中上部,随着H/D和γD/c增大,滑移线起始位置沿着隧道轮廓逐渐向隧道底部扩展,破坏区域向水平方向扩展。排水条件下,地层破坏模式主要有3种。当内摩擦角ϕ 和γD/c较大时,随着剪胀系数的减小,极限支护力和地层破坏范围变化较大,甚至可能引起破坏模式的改变。针对不同深度提出的极限支护力简化公式可快速获得隧道环向开挖面极限支护力。 相似文献
17.
Faulting occurs over a large range of scale, parts of which are sampled by various techniques (e.g., microscopy, outcrop measurement, mapping, seismic reflection and other forms of remote sensing). Use of a single technique to measure displacement or strain will not sample faults at all scales and hence will give a biased estimate. In order to assess this bias, a knowledge of the distribution over all scales is needed.
Many samples of fault displacement appear to follow a power-law distribution, with departures which can be attributed to sampling effects. The number of faults with a displacement u is given by N(u) = Cu−D. The power-law distribution of displacement is consistent with similar distributions of other fault parameters and earthquake magnitudes. When sampling along a line (e.g., a bedding trace on a map or section), a self-similar fault population would have D = 1, whereas self-affine geometries yield D≠ 1. Displacement and extension are dominated by small faults when D > 1 and by large faults when D < 1. When sampling over areas or volumes these critical values are 2 and 3, respectively.
A set of strike-slip faults from the Badajoz-Córdoba Shear Zone, Spain, were sampled at two different scales using 1:50000 maps and outcrop measurements. Displacement ranges over 6 orders of magnitude. These and other fault populations typically have D ranging from 0.6 to 1.5.
The power-law relationship may be integrated to yield estimates of the displacement (or extension) for faults which lie beyond the resolution of the sampling system. For example, a knowledge of D allows the extension measured on a map or seismic section to be “corrected” for faults whose displacement is below the resolution of the survey. Based on an overall estimate of D = 0.9 for the Badajoz-Córdoba data, only some 40% of the extension would be recorded by map-scale faults. A corrected extension of 41% along the shear zone is estimated; which if typical for the entire 300 km zone represents some 87 km of along-strike extension. Thus, work suggests that significant displacement occurs on faults which are too small to be interpreted from conventional seismic profiles and geological maps. 相似文献
18.
Quartzofeldspathic rocks of the Gföhl gneiss from the Moldanubian of the Czech Republic span amphibolite-to granulite-facies, and are associated with eclogite. Protomylonitic fabrics related to terminal tectonic emplacement and reworking of the gneiss are common. Some non-mylonitic rocks, however, preserve early, prograde features (e.g., Opx-rimmed Hbl in metabasites), whereas others have characteristics generally associated with near-isothermal decompression (e.g., Pl-Opx moats separating Grt and Qtz in metabasites; Crd ± Spl coronas on Grt and aluminosilicates in metapelites); the unequivocal distinction between prograde and decompressional features in these rocks, however, may not be possible or even justified. For example, some metapelites contain growth-zoned (i.e., rimward increase in XMg) garnets that also record evidence (i.e., rimward decrease in XCa, compensated by the presence of reversely-zoned plagioclase in the same rock) of decompression. In rare instances, eclogitic rocks (P > 11 kbar) interpreted as tectonic enclaves within the gneiss also record mineralogic evidence of decompression (e.g., Crd-Opx-Spr coronas on pyrope). In metapelites, plagioclase-cored coronal garnets with high Prp/Grs ratios (˜ 2.5) record near-isobaric cooling from near the thermal maximum at a relatively shallow but undetermined crustal level.
Unlike Gföhl gneisses elsewhere (e.g., in Austria), the rocks described here do not preserve evidence of extreme metamorphic conditions. Texturally stable Grt-Bt pairs in non-mylonitic samples give Tmax < 750 °C. Pmax is not known, but prograde metamorphism apparently progressed from the kyanite to sillimanite fields, implying P ˜ 8 kbar at the maximum Grt-Bt temperature. At these conditions, dehydration of mafic gneiss occurred in the presence of a CO2-rich (XCO2 ˜ 0.85) pore fluid 相似文献
19.
Musa Güner 《Tectonophysics》1982,90(3-4):309-312
The palaeomagnetism of basic rocks and sulphide ores has been studied in the Küre area, Pontic Ranges, Turkey. Progressive alternating-field demagnetization revealed a characteristic remanent magnetization in all investigated rock types except a dacite. The following virtual geomagnetic poles were obtained:
Basalt and quartz diabase (oldest): D = 59°, I = +66°, 95 = 4.8, pole 49°N, 93°E. Diabase: D = 210°, I = −15°, 95 = 15.0, pole 47°N, 167°E. Massive sulphide ores: D = 107°, I = +63°, 95 = 8.7, pole 18°N, 80°E. Peridotite: D = 131°, I = +54°, 95 = 10.9, pole 2°S, 72°E. Amphibolitized diabase (youngest): D = 293°, I = +59°, 95 = 12.6, pole 40°S, 145°E.
The longidutinal difference in pole positions between the oldest and the youngest rocks is interpreted as being due to a post-Permian counterclockwise rotation of the studied region in relation to the African continent. In addition, there are indications of local rotational movements within the Küre area. 相似文献
20.
大兴安岭多年冻土区不同林型土壤微生物群落特征 总被引：1，自引：1，他引：0
高纬度多年冻土区是全球变化的敏感区域,揭示不同林型土壤微生物群落的演变规律,对于理解气候变化对寒区生态系统的影响机制具有重要意义。以大兴安岭多年冻土区3种典型林型（落叶松林、樟子松林和白桦林）为研究对象,运用磷脂脂肪酸法（PLFA）系统研究土壤微生物群落结构间差异及与土壤因子的关系。结果表明：不同林型土壤中共检测到38种PLFA生物标记,含量较高的PLFA为16∶0、18∶0、19∶0和18∶2ω6c;各类群微生物中,细菌PLFA含量最高,占总磷脂脂肪酸的83.78%~90.55%,其次为真菌,放线菌最低;白桦林土壤总磷脂脂肪酸、革兰氏阴性菌、革兰氏阳性菌、真菌和放线菌的含量最高分别为22.03、5.13、4.90、1.88和0.77 nmol·g-1,而樟子松林最低分别为14.25、2.75、2.75、1.34和0.51 nmol·g-1。Shannon-Wiener多样性指数主要表现为白桦林 > 落叶松林 > 樟子松林。冗余分析结果为：土壤含水量、全氮、总有机碳与总磷脂脂肪酸、细菌、革兰氏阳性菌和革兰氏阴性菌呈显著正相关（P<0.05）;铵态氮、硝态氮、全磷与真菌和放线菌呈显著正相关（P<0.05）。大兴安岭多年冻土区不同林型间土壤微生物群落特征存在显著差异,土壤含水量、全氮和总有机碳是影响多年冻土微生物群落结构的主要因素。 相似文献