共查询到20条相似文献，搜索用时 593 毫秒
1.
Modelling of rutting of two flexible pavements with the shakedown theory and the finite element method 总被引：1，自引：0，他引：1
Cyrille Chazallon Georg Koval Pierre Hornych Fatima Allou Saida Mouhoubi 《Computers and Geotechnics》2009
This paper presents a finite element program, for the modelling of rutting of flexible pavements. In its present version, the program incorporates a permanent deformation model for unbound granular materials based on the concept of the shakedown theory developed by Zarka for metallic structures under cyclic loadings and has been used to estimate the permanent deformations of unbound granular materials (UGM) subjected to traffic loading. The calculation is performed in two steps: the first step consists in modelling the resilient behaviour of the pavement in 3D, using non-linear elastic models, to determine the stress field in the pavement. Then stress paths are derived and used to calculate the permanent deformations and the displacements, using a Drucker–Prager yield surface. An application to the prediction of the permanent deformations of experimental pavements with an unbound granular base, tested on the LCPC pavement testing facility is presented. 相似文献
2.
3.
A review of the literature indicates that the elastic behaviour of granular materials is isotropic and that Poissony's ratio is constant, whereas Young's Modulus, the bulk modulus and the shear modulus vary with the mean normal stress and the deviatoric stress. A nonlinear, isotropic model for the elastic behaviour is developed on the basis of theoretical considerations involving the principle of conservation of energy. Energy is therefore neither generated not dissipated in closed-loop stress paths or in closed-loop strain paths. The framework for the model consists of Hooke's law, in which Poission's ratio is constant and Young's modulus is expressed as a power function invlving the first invariat of the stress tensor and the second invariant of the deviatoric stress tensor. The characteristics of the model are described, and the accuracy is evaluated by comparison with experimental results from triaxial tests and three-dimensional cubical triaxial tests with a variety of stress paths. Parameter determination from unloading–reloading cycles in conventional triaxial compression tests is demonstrated, typical parameter values are given for granular materials and extension of the model to soils with effective cohesion is described. 相似文献
4.
以玄武岩为试样,开展了中低应变率下的岩石单轴抗压试验。本次研究分析应变率对岩石抗压强度、弹性模量、泊松比等力学参数的影响,分别提出了岩石抗压强度、弹性模量、泊松比等参数与应变率之间的拟合关系式。以峰值应力对应的应变和峰值后的软化模量为脆性评价指标,分析加载应变率对岩石脆性的影响。研究表明:(1)岩石抗压强度、弹性模量均随应变率的增加而增加。(2)岩石泊松比随应变率增加而减小。(3)随着应变率增加大,峰值应力对应的应变增大,峰值后的应变软化程度减小,岩石脆性减弱。(4)应变率对岩石抗压强度影响较大,对弹性模量和泊松比的影响较小。(5)曲线拟合效果良好,提出的拟合关系式合理。 相似文献
5.
A matrix relating stress and elastic strain tensors for anisotropic particulate materials has been derived. The magnitude of the matrix depends on the state of the material anisotropy. Anisotropy in granular materials depends on strain because normal and tangential particle contact forces, as well as the spatial distribution of the contacts, vary with stress and strain. However, the rotation tensor and the strain tensor cannot be independent; they must satisfy certain constraints to meet the requirement for macroscopic stress tensor symmetry. These conditions and constraints lead to the derivation of the matrix presented in this article. The principal directions of the stress tensor and strain tensor are generally not coincident, and the values of deformation parameters, Young's modulus and Poisson's ratio, are direction dependent; these two aspects are also discussed in this paper. Whereas this matrix can be used in static numerical analyses for elastic problems, we note that this relationship can also be used as a basis upon which to derive a fully incremental stress–strain relationship for anisotropic granular materials in the plastic state, where the anisotropy is evolving with strain. 相似文献
6.
The displacement formulation of the finite element method is well suited to the analysis of elasto-plasticity problems involving compressible material behaviour, but it is well known that numerical difficulties occur when the material is incompressible or nearly incompressible. The effect of these additional constraints depends on both element formulation and mesh topology. A two-dimensional plane strain finite element formulation suitable for the solution of problems involving large strains and displacements (but small rotations) based on the isoparametric approach is described. The kinematics of deformation are defined in terms of the Eulerian strain rates that are invariably used in small strain analysis; the formulation therefore retains some of the character of small strain theory but includes additional geometrically non-linear terms. The results of a series of plane strain finite element analyses of two cylindrical expansion problems are presented. These results confirm the previously observed trend that as Poisson's ratio approaches 0·5 then the quality of the calculated stress deteriorates. The study also indicates that the solution quality depends increasingly on mesh topology as perfect incompressibility is reached. 相似文献
7.
8.
In the present work, stationary discontinuities and fluttery instabilities of wave propagation in saturated poro‐elastoplastic media are analysed in the frame of Biot theory. The generalized Biot formulations are particularly employed for simulating non‐linear coupled hydro‐mechanical behaviour of the media. Inertial coupling effect between the solid and the fluid phases of the media is also taken into account. The non‐associated Drucker–Prager criterion to describe non‐linear constitutive behaviour of pressure dependent elasto‐plasticity for the solid skeleton of the media is particularly considered. With omission of compressibility of solid grains and the pore fluid, the critical conditions of stationary discontinuities and flutter instabilities occurring in wave propagation are given in explicit forms. It is shown that when the stationary discontinuity is triggered at the surface of discontinuity there still may exist real wave speeds. The wave speeds across the stationary discontinuity surface entirely cease to be real only in non‐associated plasticity, certain ranges of value of Poisson's ratio and when compression stress normal to the surface of discontinuity dominates the stress state at the surface. It is also indicated that the fluttery instabilities, under which some wave speeds cease to be real even in strain hardening stage, may occur prior to stationary discontinuities only for non‐associated plasticity under certain conditions. These conditions are: (1) both the porosity and the Poisson's ratio possess relatively low values and (2) the deviatoric part of the effective stress normal to the surface of discontinuity is compressive. A region in the porosity–Poisson's ratio plot, in which fluttery instabilities are possible to occur, is given. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
9.
An examination has been made of the behaviour of a finite layer of elastic material of constant Poisson's ratio, whose Young's modulus increases linearly with depth, and which rests on a rough rigid base. Values of surface settlement at the corner of a rectangular area of uniform loading are presented for values of Poisson's ratio of \documentclass{article}\pagestyle{empty}\begin{document}$ \frac{1}{2} $\end{document}, \documentclass{article}\pagestyle{empty}\begin{document}$ \frac{1}{3} $\end{document} and 0, and for wide ranges of degree of inhomogeneity and loading breadth to depth ratio. 相似文献
10.
In this paper, a numerical model is presented to represent the fracture process in hard rocks based on a pseudo-discontinuum method called the Continuum Voronoi Block Model (CVBM). To validate this tool, numerical models for one Brazilian test, one unconfined compression test, and multiple triaxial compression tests with different confining stress were calibrated to match laboratory test results for Creighton granite. The model proved robust and matched the following macro-properties: crack initiation (CI) stress, (CD) stress, peak strength, tensile strength, Young's Modulus, and Poisson's ratio. The calibrated model served as a basis for a sensitivity study to analyze how micro-properties influence the rock's macroscopic responses. From the sensitivity study, a calibration methodology was proposed, which shall facilitate the use of the CVBM in future works. 相似文献
11.
The finite element method (FEM) and the boundary element method (BEM) are two well established numerical methods used for the analysis of underground openings. The advantages of both the methods are utilized by adopting FEBEM in which finite elements are coupled with boundary elements. A coupling procedure is presented in this paper. In using FEBEM, the effect of the location of interface boundary between finite element and boundary element regions, effect of Poisson's ratio and effect of stress ratio are discussed. It is shown that Poisson's ratio and stress ratio have significant effect on the accuracy of the results. Different discretization schemes are discussed to study their effect on accuracy and computation time. The use of different material properties in the FE region is presented. A comparative study is made with FEM for all the cases. It is shown that use of FEBEM is more advantageous than FEM. 相似文献
12.
The lumpy soil is a by product of the open-pit mining. A composite-lumpy material (in which, the lumps are randomly distributed in the reconstituted soil) is being created due to the degradation of the initial granular structure. In the present study, the compression and failure behaviour of an artificial lumpy material with randomly distributed inclusions are investigated using the finite element method. The computation results show that the stress ratio, defined as the ratio of the volume average stress between the lumps and the reconstituted soil within the inter-lump voids, is significantly affected by both the volume fraction and the preconsolidation pressure of the lumps under an isotropic compression path, while the volume fraction of the lumps plays a minor role under a triaxial compression path. Based on the simulation results, a homogenization law was proposed utilizing the secant stiffnesses. 相似文献
13.
M. E. Duncan Fama 《国际地质力学数值与分析法杂志》1989,13(3):331-337
It is shown that a finite element calculation which approximates an ‘infinite medium’; problem by a mesh with finite boundaries will yield greater accuracy when stress boundary conditions are applied on the far-field boundary than is obtainable with displacement boundary conditions. In particular, with Poisson's ratio close to 0.5, the accuracy of the latter model is severely impaired, whereas the stress boundary condition model is unaffected for Poisson's ratio of 0.49 and a reasonable mesh. The eight-node quadratic isoparametric element displays superb accuracy for the axisymmetric thick cylinder with either type of boundary condition. 相似文献
14.
Interaction of a cylindrical thin‐walled pile with an inhomogeneous isotropic elastic medium 
下载免费PDF全文
下载免费PDF全文 This paper presents a rigorous analysis for the static interaction of a cylindrical thin‐walled pile with an inhomogeneous isotropic elastic half‐space under vertical, horizontal, and torsional forces individually applied at the top of pile. The inhomogeneity is specified with the exponential variation of shear modulus along depth of the embedding medium, and the Poisson's ratio is assumed to be constant. By means of a set of Green's functions for pile and soil medium and satisfying the compatibility conditions between the 2 interacting media, the formulation is reduced to coupled Fredholm integral equations. Using the adaptive‐gradient elements, capable of capturing the singular stress transfer at both ends of the pile, a numerical procedure is developed and utilized for evaluating the relevant integral equations and studying the inhomogeneity effect on the soil‐pile interaction responses. The analysis results have been validated for different soil‐pile modulus ratios under axial load and for a Poisson's ratio of 0.3 under lateral load. The procedure does not consider the nonlinear behavior of the soil medium or plastic yielding in the pile section, and the impact of the unreliable results for the case of high Poisson's ratio is not examined. 相似文献
15.
This paper presents a fabric tensor-based bounding surface model accounting for anisotropic behaviour (e.g. the dependency of peak strength on loading direction and non-coaxial deformation) of granular materials. This model is developed based on a well-calibrated isotropic bounding surface model. The yield surface is modified by incorporating the back stress which is proportional to a contact normal-based fabric tensor for characterising fabric anisotropy. The evolution law of the fabric tensor, which is dependent on both rates of the stress ratio and the plastic strain, rules that the material fabric tends to align with the loading direction and evolves towards a unique critical state fabric tensor under monotonic shearing. The incorporation of the evolution law leads to a rotational hardening of the yield surface. The anisotropic critical state is assumed to be independent of the initial values of void ratio and fabric tensor. The critical state fabric tensor has the same intermediate stress ratio (i.e. b value) and principal directions as the critical state stress tensor. A non-associated flow rule in the deviatoric plane is adopted, which is able to predict the non-coaxial flow naturally. The stress–strain relation and fabric evolution of model predictions show a satisfactory agreement with DEM simulation results under monotonic shearing with different loading directions. The model is also validated by comparing with laboratory test results of Leighton Buzzard sand and Toyoura sand under various loading paths. The comparison results demonstrate encouraging applicability of the model for predicting the anisotropic behaviour of granular materials.
相似文献16.
The wetting deformation of coarse granular materials is often considered to be an important cause of the core wall rockfill dam cracks during impounding. By analyzing existing research results, this paper proposes a hyperbolic relationship between the wetting axial strain and wetting stress level and puts forwards a warped surface relationship among spherical stress, shear stress, and the ratio of wetting volumetric strain to wetting axial strain. To illustrate its practicability, the wetting strain model's parameter determination process is introduced and the rockfill materials wetting parameters are determined using the triaxial wetting test data. Moreover, the collapse settlement of Guanyinyan rockfill dam during first impounding is numerically simulated using the proposed method to calculate rockfill wetting deformation and verified by field measurements and monitoring data. The results show that the calculative method of wetting deformation proposed in this paper is reasonable and practical; the wetting deformation of upstream rockfill materials would cause an adverse deformation trend, which may lead to crack occurrence at the upstream slope and dam crest; and the Guanyinyan rockfill dam cracks on the top of junction mainly caused by the wetting deformation of upstream rockfill. 相似文献
17.
Analysis of rectangular piles subjected to lateral loads in nonhomogeneous soil using a Winkler model approach 下载免费PDF全文
下载免费PDF全文 Hiroyoshi Hirai 《国际地质力学数值与分析法杂志》2015,39(9):937-968
An analytical approach using a Winkler model based on two lateral soil displacement components in a three‐dimensional soil is investigated to provide analytical solutions of horizontal response of a rectangular pile subjected to lateral loads in nonhomogeneous soil. The two lateral displacement components of a soil surrounding the rectangular pile are represented by the Fourier series of displacement potential functions in the elastic three‐dimensional analysis. The lateral stiffness coefficient of the rectangular pile shaft in nonhomogeneous soil is derived from the rocking stiffness coefficient taking into account rocking rotation of a rigid pile shaft. The relationship between horizontal displacement, rotation, moment, and shear force for the rectangular pile subjected to horizontal loads in nonhomogeneous soil is obtainable in the form of the recurrence equation. The formulation of lateral displacement and rotation for a rectangular pile subjected to lateral loads on the pile base in nonhomogeneous soil is proposed by taking into account Mindlin's equation and the equivalent thickness for soil layers in the equivalent elastic method. The difference of lateral behavior between square and circular piles subjected to lateral loads is insignificant. The effect of aspect ratio of the rectangular pile on the lateral behavior is great for the lower stiffness ratio between pile and soil and the larger length–equivalent diameter ratio. The effect of the value of Poisson's ratio of soil on lateral stiffness coefficient is relatively small except Poisson's ratio close to 0.5. The comparison of the results calculated by the current method for a rectangular pile subjected to lateral loads in nonhomogeneous soil has shown good agreement with those obtained from the analytical methods and the finite element method. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
18.
This paper reappraises Perzyna-type viscoplasticity for the constitutive modelling of granular geomaterials, with emphasis on the simulation of rate/time effects of different magnitude. An existing elasto-plastic model for sands is first recast into a Perzyna viscoplastic formulation and then calibrated/validated against laboratory test results on Hostun sand from the literature. Notable model features include (1) enhanced definition of the viscous nucleus function and (2) void ratio dependence of stiffness and viscous parameters, to model the pycnotropic behaviour of granular materials with a single set of parameters, uniquely identified against standard creep and triaxial test results. The comparison between experimental data and numerical simulations points out the predicative capability of the developed model and the complexity of defining a unique viscous nucleus function to capture sand behaviour under different loading/initial/boundary and drainage conditions. It is concluded that the unified viscoplastic simulation of both drained and undrained response is particularly challenging within Perzyna's framework and opens to future research in the area. The discussion presented is relevant, for instance, to the simulation of multiphase strain localisation phenomena, such as those associated to slope stability problems in variably saturated soils. 相似文献
19.
Yinghong Qin Haifeng Yang Zhiheng Deng Jiaming Zhang 《Environmental Earth Sciences》2014,72(5):1533-1540
A simplified model is proposed to estimate the leaching constituents from waste granular pavement base to adjacent groundwater. The model considers pollutants leaching from a longitudinally infinite waste granular base. The leaching of the base is deemed to obey the diffusion model. After leaving the pavement layers, the leachate is subjected to retardation and dilution during its transport to the nearby aquifer. The retardation is estimated from the breakthrough curve of steady-water flow through a homogeneous soil profile. The model is available for any waste granular base that contains any type of leachable pollutants. But parameterization of the model is different substantially for different pollutants; therefore how to parameterize the mode is discussed. Recycled glass is exemplified as the granular base materials, and the transport of Cadmium to the local aquifer is demonstrated. A sensitivity study is conducted to demonstrate the influences of field conditions and waste-leaching characteristics on the pore concentration of the pollutants in the target well. 相似文献
20.
A novel conceptual model of the mechanics of sands is developed within an elastic–plastic framework. Central to this model is the realization that volume changes in anisotropic granular materials occur as a result of two fundamentally different mechanisms. The first is purely kinematic, dilative, and is the result of the changes in anisotropic fabric. There is also a second volume change in granular media that occurs as a direct response to changes in stress as in a standard elastic/plastic continuum. The inclusion of the two sources of volume change results in three important datum states. When subjected to isotropic strains, the resulting stress state in granular materials is not isotropic but lies upon the kinematic normal consolidation line. There exists a state at which the fabric‐induced volumetric strain rate becomes equal to the stress‐induced volumetric strain rate making the total plastic volumetric strain rate equal to zero. Granular response changes from contractive to dilative at this phase transformation line. The third datum state is the one in which the stress‐induced volumetric strain rate is zero. The sand, however, continues to dilate at this state with the difference between stress and dilation ratio a constant as predicted by Taylor's stress–dilatancy rule. These predictions are shown in accordance with experimental data from a series of drained tests and undrained on Ottawa sand. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献