首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 359 毫秒
1.
A teleseismic profile consisting of 26 stations was deployed along 30°N latitude in the eastern Tibetan Plateau. By use of the inversion of P-wave receiver function, the S-wave velocity structures at depth from surface to 80 km beneath the profile have been determined. The inversion results reveal that there is significant lateral variation of the crustal structure between the tectonic blocks on the profile. From Linzhi north of the eastern Himalayan Syntaxis, the crust is gradually thickened in NE direction; the crustal thickness reaches to the maximum value (∼72 km) at the Bangong-Nujiang suture, and then decreased to 65 km in the Qiangtang block, to 57–64 km in the Bayan Har block, and to 40–45 km in the Sichuan Basin. The eastern segment of the teleseismic profile (to the east of Batang) coincides geographically with the Zhubalong-Zizhong deep seismic sounding profile carried out in 2000, and the S-wave velocity structure determined from receiver functions is consistent with the P-wave velocity structure obtained by deep seismic sounding in respect of the depths of Moho and major crustal interfaces. In the Qiangtang and the Bayan Har blocks, the lower velocity layer is widespread in the lower crust (at depth of 30–60 km) along the profile, while there is a normal velocity distribution in lower crust in the Sichuan Basin. On an average, the crustal velocity ratio (Poisson ratio) in tectonic blocks on the profile is 1.73 (σ = 0.247) in the Lhasa block, 1.78 (σ = 0.269) in the Banggong-Nujiang suture, 1.80 (σ = 0.275) in the Qiangtang block, 1.86 (σ = 0.294) in the Bayan Har blocks, and 1.77 (σ = 0.265) in the Yangtze block, respectively. The Qiangtang and the Bayan Har blocks are characterized by lower S-wave velocity anomaly in lower crust, complicated Moho transition, and higher crustal Poisson ratio, indicating that there is a hot and weak medium in lower crust. These are considered as the deep environment of lower crustal flow in the eastern Tibetan Plateau. Flowage of the ductile material in lower crust may be attributable to the variation of the gravitational potential energy in upper crust from higher on the plateau to lower off plateau. Supported by the National Natural Science Foundation of China (Grants No. 40334041 and 40774037) and the International Cooperation Program of the Ministry of Science and Technology of China (Grant No. 2003DF000011)  相似文献   

2.
S-wave velocity structure beneath the Ailaoshan-Red River fault was obtained from receiver functions by using teleseismic body wave records of broadband digital seismic stations. The average crustal thickness, Vp/Vs ratio and Poisson’s ratio were also estimated. The results indicate that the interface of crust and mantle beneath the Ailaoshan-Red River fault is not a sharp velocity discontinuity but a characteristic transition zone. The velocity increases relatively fast at the depth of Moho and then increases slowly in the uppermost mantle. The average crustal thickness across the fault is 36―37 km on the southwest side and 40―42 km on the northeast side, indicating that the fault cuts the crust. The relatively high Poisson’s ratio (0.26―0.28) of the crust implies a high content of mafic materials in the lower crust. Moreover, the lower crust with low velocity could be an ideal position for decoupling between the crust and upper mantle.  相似文献   

3.
Receiver functions are widely employed to detect P-to-S converted waves and are especially useful to image seismic discontinuities in the crust. In this study we used the P receiver function technique to investigate the velocity structure of the crust beneath the Northwest Zagros and Central Iran and map out the lateral variation of the Moho boundary within this area. Our dataset includes teleseismic data (M b ≥ 5.5, epicentral distance from 30° to 95°) recorded at 12 three-component short-period stations of Kermanshah, Isfahan and Yazd telemetry seismic networks. Our results obtained from P receiver functions indicate clear Ps conversions at the Moho boundary. The Moho depths were firstly estimated from the delay time of the Moho converted phase relative to the direct P wave beneath each network. Then, we used the P receiver function inversion to find the properties of the Moho discontinuity such as depth and velocity contrast. Our results obtained from PRF are in good agreement with those obtained from the P receiver function modeling. We found an average Moho depth of about 42 km beneath the Northwest Zagros increasing toward the Sanandaj-Sirjan Metamorphic Zone and reaches 51 km, where two crusts (Zagros and Central Iran) are assumed to be superposed. The Moho depth decreases toward the Urmieh-Dokhtar Cenozoic volcanic belt and reaches 43 km beneath this area. We found a relatively flat Moho beneath the Central Iran where, the average crustal thickness is about 42 km. Our P receiver function modeling revealed a shear wave velocity of 3.6 km/s in the crust of Northwest Zagros and Central Iran increasing to 4.5 km/s beneath the Moho boundary. The average shear wave velocity in the crust of UDMA as SSZ is 3.6 km/s, which reaches to 4.0 km/s while in SSZ increases to 4.3 km/s beneath the Moho.  相似文献   

4.
云南数字地震台站下方的S波速度结构研究   总被引：36，自引：13，他引：36       下载免费PDF全文
通过对云南数字地震台站的宽频带远震接收函数反演，获得了云南地区数字地震台站下方0-0km深度范围的S波速度结构.结果表明，云南地区地壳厚度变化剧烈，中甸、丽江等西北部地区，地壳厚度达62km左右，景洪、思茅和沧源等南部地区，地壳厚度仅为32-34km.厚地壳从西北部向东南方向伸展，厚度和范围逐渐减小，至通海一带地壳厚度减为42km，其形态和范围与小江断裂和元江断裂围成的川滇菱形块体相一致.地壳厚度较小的东、南部地区Moho面速度界面明显；在地壳厚度较大或变化剧烈的地区，Moho面大多表现为S波速度的高梯度带.云南地区S波速度结构具有很强的横向不均匀性.km深度以上，北部地区S波速度明显低于南部地区，在-20km深度范围内，北部地区的S波速度比南部地区高.地壳内部S波速度界面的连续性较差，低速层的深度和范围不一，近一半的台站下方不存在明显的低速层.受南部地区上地幔的影响，40-50km深度范围内，S波速度南部高、北部低，高速区随深度增加逐渐向北推移，低速异常区形态与川滇菱形块体的形态趋向一致.70-80km深度的上地幔速度分布与云南地区大震分布具有一定的相关性.  相似文献   

5.
In order to investigate the velocity structure of the southern part of the Korean peninsula, seismic refraction profiles were obtained along a 294-km WNW-ESE line and a 335-km NNW-SSE line in 2002 and 2004, respectively. Seismic waves were generated by detonating 500–1000 kg explosives in drill holes at depths of 80–150 m. The seismic signals were recorded by portable seismometers at nominal intervals of 1.5–1.7 km. Separate velocity tomograms were derived from first arrival times using a series expansion method of travel-time inversion. The raypaths indicate several mid-crust interfaces including those at approximate depths of 2–3, 15–17, and 22 km. The Moho discontinuity with refraction velocity of 7.8 to 8.4 km/s has a maximum depth of 37–39 km under the southern central portion of the peninsula. The Moho becomes shallower as the Yellow Sea and the East Sea are approached on the west and east coasts of the peninsula, respectively. The depth of the 7.6 km/s velocity contour varies from 29.4 km to 36.5 km. The discrepancy in depth between the seismological Moho and the interpreted critically refracting interface may result from the presence of a gradual transition between the crust and mantle. The velocity tomograms show particular crustal structures including (1) the existence of an over 70-km wide low-velocity zone centered at 6–7 km depth under the Okchon fold belt and Ryeongnam massif, (2) existence of high-velocity materials under the Gyeongsang basin, and (3) the downward extension of the Yeongdong fault to depths greater than 10 km.  相似文献   

6.
According to a Sino-U. S. joint project, eleven broadband digital PASSCAL seismometers had been deployed inside the Tibetan Plateau, of which 7 stations were on the profile from Lhasa to Golmud and other 4 stations situated at Maxin, Yushu, Xigatze and Linzhi. Dispersions and phase velocities of the Rayleigh surface waves (10s–120s) were obtained on five paths distributed in the different blocks of Tibetan Plateau. Inversions of the S-wave velocity structures in Songpan-Ganzi block, Qiang-Tang block, Lhasa block and the faulted rift zone were obtained from the dispersion data. The results show that significant lateral variation of the S-wave velocity structures among the different blocks exists. The path from Wenquan to Xigatze (abbreviated as Wndo-Xiga) passes through the rift-zone of Yadong-Anduo. The phase velocities of Rayleigh waves from 10s to 100s on this path are significantly higher than that on other paths. The calculated mean crustal velocity on this path is 3.8 km/s, much greater than that on other paths, where mean crustal velocities of 3.4–3.5 km/s are usually observed. Low velocity zones with different thicknesses and velocities are observed in the middle-lower crust for different paths. Songpan-Ganzi block, located in the northern part of Tibetan Plateau is characterized by a thinner crust of 65 km thick and a prominent low velocity zone in the upper mantle. The low velocity zone with a velocity of 4.2 km/s is located at a depth form 115 km to 175 km. While in other blocks, no low velocity zone in the upper mantle is observed. The value of Sn in Songpan-Ganzi is calculated to be 4.5 km/s, while those in Qiang-Tang and Lhasa blocks are about 4.6 km/s. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,14, Supp., 566–573, 1992.  相似文献   

7.
本文使用位于喜马拉雅东构造结地区布置的24个宽频带地震台站记录的远震波形数据,利用P波接收函数的方法研究了台站下方的Moho面深度、泊松比和地壳速度结构.结果表明,东构造结内Moho面深度呈现出自南西向北东方向逐渐变深的趋势,地壳厚度在54~60 km范围内,其中东久一米林走滑断裂带附近Moho面最浅,东构造结周围拉萨地块的Moho面深度在60 km以上.东构造结西部东久一米林走滑断裂带附近地壳泊松比较高.嘉黎断裂带南北两侧的泊松比差别较大,说明该断裂带两侧地壳结构存在显著差异.东构造结周边拉萨地块地壳内普遍存在低速层,分布在20~40 km深度范围内,厚度约为5~15 km.  相似文献   

8.
The Yellowstone volcano is one of the largest active volcanoes in the world, and its potential hazards demand detailed seismological and geodetic studies. Previous studies with travel time tomography and receiver functions have revealed a low-velocity layer in the crust beneath the Yellowstone volcano, suggesting the presence of a magma chamber at depth. We use ambient seismic noise from regional seismic stations to retrieve short-period surface waves and then study the shallow shear velocity structure of the Yellowstone region by surface wave dispersion analysis. We first obtained a crustal model of the area outside of the Yellowstone volcano and then constructed an absolute shear wave velocity structure in combination with receiver function results for the crust beneath the Yellowstone volcano. The velocity model shows a low-velocity layer with shear velocity at around 1.3 km/s, suggesting that a large-scale magma chamber exists at shallow levels within the crust of the Yellowstone volcanic region.  相似文献   

9.
A total of 11 earthquakes with 15 Rayleigh wave paths, recorded at 11 broadband digital PASSCAL seismometers installed in the Tibet Plateau by the Sino-U.S. joint research group, were used to determine the phase velocity and attenuation coefficient of surface waves in periods of 10–130 s. The average shear wave velocity and quality factor {ie271-1} structures in the crust and upper mantle were obtained in this region. The result shows the average {ie271-2} is low and there exists a high attenuation ({ie271-3}=93–141) layer in the crust. The depth range of the low {ie271-4} value layer (16–42 km) is consistent with the range of low velocity layer (21–51 km) in the crust. Below 63 km in the lower crust, {ie271-5} decreases with depth from 114 to 34 at depth of 180 km. The low shear wave velocity and low value of {ie271-6} at the same depth range in the crust indicate that the rocks in the range is probably melted or partially melted. According to the shear wave velocity structure, the average thickness of the crust is about 71 km and a clear velocity discontiniuty appears at the depth of 51 km. The low-velocity zone (4. 26 km/s) at depth of 96–180 km may be corresponding to the asthenosphere. Contribution No. 96A0047, Institute of Geophysics, SSB, China. This study was supported by the National Natural Science Foundation of China.  相似文献   

10.
The P- and S-wave receiver functions and dispersion curves of the fundamental Rayleigh wave are used to study the lithosphere within the Central Anatolian Plateau. The results for eight broadband seismic stations are presented. It is established that within the plateau, the crust with a thickness of about 35 km is underlain by the mantle lid with its bottom at a depth of about 60 km. The velocities of longitudinal (Vp) and shear (Vs) waves in this layer are at most 7.6 and 4.5 km/s, respectively, and the Vp/Vs ratio is close to 1.7 (i.e., by 6% lower than in the standard IASP91 and PREM models). Such a low velocity ratio is characteristic of rocks having high orthopyroxene content. Beneath the high-velocity mantle lid, the S-wave velocity decreases to 4.0–4.2 km/s and the Vp/Vs ratio is close to its standard value (1.8). At most stations, the P-wave receiver functions do not contain seismic phase P410s, which is formed at the global seismic boundary at a depth of 410 km. The seismic boundary at a depth of 410 km is related to the olivine-spinel phase transformation, and its absence can indicate the anomalously low olivine content and high basalt content. This anomaly is probably associated with the subduction of a large amount of oceanic crust during the closure of the Tethys. The results of the study overall indicate the high informativity of the used method.  相似文献   

11.
The structure of the crust and the crust-mantle boundary in the Vogtland/West Bohemian region have been a target of several seismic measurements for the last 25 years, beginning with the steep-angle reflection seismic studies (DEKORP-4/KTB, MVE-90, 9HR), the refraction and wide-angle experiments (GRANU’95, CELEBRATION 2000, SUDETES 2003), and followed by passive seismic studies (receiver functions, teleseismic tomography). The steep-angle reflection studies imaged a highly reflective lower crust (4 to 6 km thick) with the Moho interpreted in a depth between 30 and 32 km and a thinner crust beneath the Eger Rift. The refraction and wide-angle reflection seismic studies (CELEBRATION 2000) revealed strong wide-angle reflections in a depth of 26–28 km interpreted as the top of the lower crust. Long coda of these reflections indicates strong reflectivity in the lower crustal layer, a phenomenon frequently observed in the Caledonian and Variscan areas. The receiver function studies detected one strong conversion from the base of the crust interpreted as the Moho discontinuity at a depth between 27 and 37 km (average at about 31 km). The discrepancies in the Moho depth determination could be partly attributed to different background of the methods and their resolution, but could not fully explain them. So that new receivers function modelling was provided. It revealed that, instead of a first-order Moho discontinuity, the observations can be explained with a lower crustal layer or a crust-mantle transition zone with a maximum thickness of 5 km. The consequent synthetic ray-tracing modelling resulted in the model with the top of the lower crust at 28 km, where highly reflective lower crustal layer can obscure the Moho reflection at a depth of 32–33 km.  相似文献   

12.
The Tienshan orogenic belt is one of the most active intracontinental orogenic belts in the world. Studying the deep crust-mantle structure in this area is of great significance for understanding the deep dynamics of the Tienshan orogen. The distribution of fixed seismic stations in the Tianshan orogenic belt is sparse. The low resolution of the existing tomographic results in the Tienshan orogenic belt has affected the in-depth understanding of the deep dynamics of the Tienshan orogenic belt. In this paper, the observation data of 52 mobile seismic stations in the Xinjiang Seismic Network and the 11 new seismic stations in the Tienshan area for one-year observations are used. The seismic ambient noise tomography method is used to obtain the Rayleigh surface wave velocity distribution image in the range of 10~50s beneath the Chinese Tienshan and its adjacent areas (41°~48° N, 79°~91° E). The joint inversion of surface wave and receiver function reveals the S-wave velocity structure of the crust and uppermost mantle and the crustal thickness below the station beneath the Chinese Tienshan area(41°~46° N, 79°~91° E). The use of observation data from mobile stations and new fixed seismic stations has improved the resolution of surface wave phase velocity imaging and S-wave velocity structure models in the study area.
The results show that there are many obvious low-velocity layers in the crust near the basin-bearing zone in the northern Tienshan Mountains and the southern Tienshan Mountains. There are significant differences in the structural characteristics and distribution range of the low-velocity zone in the northern margin and the southern margin. Combining previous research results on artificial seismic profiles, receiver function profiles, teleseismic tomography, and continental subduction simulation experiments, it is speculated that the subduction of the Tarim Basin and the Junggar Basin to the Tienshan orogenic belt mainly occurs in the middle of the Chinese Tienshan orogenic belt, and the subduction of the southern margin of the Tienshan Mountains is larger than that of the northern margin, and the subduction of the eastern crust is not obvious or in the early subduction stage. There are many low-velocity layers in the inner crust of the Tienshan orogenic belt, and most of them correspond to the strong uplifting areas that are currently occurring. The thickness of the crust below the Tienshan orogenic belt is between 55km and 63km. The thickness of the crust(about 63km)is the largest near the BLT seismic station in the Bazhou region of Xinjiang. The average crustal thickness of the Tarim Basin is about 45km, and that of the Junggar Basin is 47km. The S-wave velocity structure obtained in this study can provide a new deep basis for the study of the segmentation of the Tienshan orogenic belt and the difference of the basin-mountain coupling type.  相似文献   

13.
用接收函数反演甘肃测震台网下方的S波速度结构   总被引：1，自引：1，他引：1       下载免费PDF全文
利用接收函数方法对甘肃测震台网下方的一维S波速度进行了研究。结果显示甘肃测震台网各个台站下方地壳内部可分为两层:第一层深度为20~25 km之间;第二层为Moho界面,其平均深度约为50 km,界面上表面的速度约为3.8 km/s,界面底部的速度约为4.5 km/s。  相似文献   

14.
A broadband seismic array of 7 stations was set up in the western Dabie Mountains (31°20′-31°50′N, 114°30′-115°E). Teleseismic events from May 2001 to November 2001 were collected and analyzed by radial receiver function to determine the S-wave velocity structure of the crust and uppermost mantle. The crustal thickness is 32-38 km beneath the array. The crust-mantle boundary appears as a gently north-dipping velocity discontinuity, but turns to be a velocity gradient beneath a station near the Qiliping shea...  相似文献   

15.
Receiver function study in northern Sumatra and the Malaysian peninsula   总被引：1，自引：0，他引：1  
In this receiver function study, we investigate the structure of the crust beneath six seismic broadband stations close to the Sunda Arc formed by subduction of the Indo-Australian under the Sunda plate. We apply three different methods to analyse receiver functions at single stations. A recently developed algorithm determines absolute shear-wave velocities from observed frequency-dependent apparent incidence angles of P waves. Using waveform inversion of receiver functions and a modified Zhu and Kanamori algorithm, properties of discontinuities such as depth, velocity contrast, and sharpness are determined. The combination of the methods leads to robust results. The approach is validated by synthetic tests. Stations located on Malaysia show high-shear-wave velocities (V S) near the surface in the range of 3.4–3.6 km s − 1 attributed to crystalline rocks and 3.6–4.0 km s − 1 in the lower crust. Upper and lower crust are clearly separated, the Moho is found at normal depths of 30–34 km where it forms a sharp discontinuity at station KUM or a gradient at stations IPM and KOM. For stations close to the subduction zone (BSI, GSI and PSI) complexity within the crust is high. Near the surface low V S of 2.6–2.9 km s − 1 indicate sediment layers. High V S of 4.2 km s − 1 are found at depth greater than 6 and 2 km at BSI and PSI, respectively. There, the Moho is located at 37 and 40 km depth. At station GSI, situated closest to the trench, the subducting slab is imaged as a north-east dipping structure separated from the sediment layer by a 10 km wide gradient in V S between 10 and 20 km depth. Within the subducting slab V S ≈ 4.7 km s − 1. At station BSI, the subducting slab is found at depth between 90 and 110 km dipping 20° ± 8° in approximately N 60° E. A velocity increase in similar depth is indicated at station PSI, however no evidence for a dipping layer is found.  相似文献   

16.
Using the P-and S-wave arrivals from the 150 earthquakes distributed in Tibetan Plateau and its neighboring areas, recorded by Tibetan seismic network, Sichuan seismic network, WWSSN and the mobile network situated in Tibetan Plateau, we have obtained the average P-and S-wave velocity models of the crust and upper mantle for this region:
(1)  The crust of 70 km average thickness can be divided into two main layers: 16 km thick upper crust with P-wave velocity 5.55 km/s and S-wave velocity 3.25 km/s; and 54 km thick lower crust with P-wave velocity 6.52 km/s and S-wave velocity 3.76 km/s.
(2)  The p-wave velocity at the upper most mantle is 7.97 km/s, and the S-wave 4.55 km/s. The low velocity layer in the upper mantle occurs approximately at 140 km deep with a thickness of about 55–62 km. The prominent velocity gradient beneath the LVZ is comparable to the gradient above it.
The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,14, Supp., 573–579, 1992.  相似文献   

17.
利用接收函数方法研究四川地区地壳结构   总被引：3，自引：0，他引：3  
范军  朱介寿  江晓涛  吴朋 《地震》2015,35(1):65-76
采用接收函数反演和共转换点(CCP)偏移叠加成像方法, 利用四川数字地震台网宽频带的52个区域固定地震台站和布设的两条52个宽频带流动地震观测台站的远震地震波形数据资料, 对四川地区地壳结构进行研究。 结果表明, 四川地区的Moho面深度在青藏高原和四川盆地差异明显, 在川西高原地区地壳厚度为52~68 km, 在川滇地块地壳厚度为50~60 km, 在中地壳内存在不连续的低速层分布; 而在四川盆地地壳厚度为38~45 km, 地壳内没有低速层存在。 Moho面深度从川西高原的60多公里至四川盆地的约40 km, 在二者的交界处龙门山断裂带下面, 存在厚度约30 km左右宽的下降过渡带, 说明其下的Moho面可能受断层影响, 结构比较复杂; 在高原地区的上地壳界面和下地壳上界面比四川盆地的相应界面深; 高原地区在中地壳的上部有不连续的低速层分布, 在松潘—甘孜地块的上地壳下部存在向南东运动的脆性推覆体, 在羌塘—理塘地块的上地壳下部存在向南东和南运动的脆性物质流动。  相似文献   

18.
The Dabie Shan is located on the eastern side of the Qinling-Dabie orogenic belt, which marks a geological boundary between the Sino-Korean and Yangtze cra- ton. Since the 1980s, the discovery of coesite and mi- crodiamond in the Dabie Shan orogen motivates an extensive interest to the ultra-high pressure (UHP)metamorphism and its exhumation[1,2]. Many results about them were published, which deal with different disciplines, including tectonics, petrology and chro- nology[3?8]. Up to now,…  相似文献   

19.
在沙城以东的延庆盆地及其邻近区域内布设了由GDS－1000宽频带数字地震仪组成的流动地震台阵，利用台阵记录的宽频带远震P波波形数据和非线性接收函数反演方法获得了延怀盆地内0-80km深度范围的地壳、上地幔S波速度结构．利用计算机三维彩色剖分显示技术研究了台阵下地壳、上地幔速度结构的横向非均匀变化。结果表明，研究区域内的地壳厚度为40km左右，壳幔界面有4km左右的上下起伏．地表沉积盖层在延庆盆地中心附近厚度约1km，而在向盆地外围延伸的方向上相对变薄．研究区域内上地壳S波速度结构较复杂，而下地壳与上地幔则相对比较均匀．其上地壳最突出的特点是在10km深度附近有明显的S波低速层．在延庆盆地下方，它延伸到6-20km的深度范围．在延庆盆地南侧，该低速层有从西往东逐渐减弱的趋势．研究区域内的地震基本上都发生在延庆盆地下方上地壳低速体外围．据此推断，延庆盆地及其临近区域内的地震活动与该区域地壳内的热状态有密切关系．  相似文献   

20.
本文利用30个基准台所记录的238条长周期面波资料,经过适配滤波和分格频散反演,得到中国大陆及邻区147个分格10-105s的纯路径频散,进而反演出青藏高原及邻近地区深至170km的剪切波三维速度结构.研究表明,青藏高原中西部地区和东部地区的地壳平均厚度分别为70±7km和65±7km,地壳平均剪切波速度分别为3.55和3.62km/s,上地幔顶盖平均速度分别为4.63和4.61km/s; 岩石层厚度均为120±10km;东部地区下地壳内30-40km深度处普遍存在低速层;青藏高原及其东侧的上地幔低速层内有横贯东西且明显向上隆起的低速腔.滇西缅北地区的地壳厚45±5km,上地壳及下地壳内都有低速层;上地幔顶盖的速度为4.42km/s,比青藏高原本体及恒河平原都低.恒河平原地壳厚34±2km,速度平均为3.45km/s;上地幔顶盖厚86±10km,速度平均为4.63km/s,顶盖内55-83km深处有一个低速夹层.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号