首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 437 毫秒
1.
The iron-magnesium distribution coefficient, $$K'_D = (X_{\Sigma {\text{FeO}}} /X_{{\text{MgO}}} )^{{\text{olivine}}} (X_{{\text{MgO}}} /X_{\Sigma {\text{FeO}}} )^{{\text{liquid}}} ,$$ has frequently been used as a means of testing whether experimental and natural silicate liquids could have been in equilibrium with olivine of mantle composition. It is shown here that this K′ D decreases with increasing oxygen fugacity (xxx) for a hydrous partial melt in equilibrium with a natural spinel peridotite assemblage under pressure and temperature conditions corresponding to those of the upper mantle (from 0.52 at the xxx of the iron-wüstite buffer to 0.04 at the xxx of the magnetite-hematite buffer). K′ D also increases with increasing pressure, with decreasing temperature, and probably with increasing Mg/(Mg+∑ Fe) of the parental peridotite, suggesting that $$K_D = (X_{{\text{FeO}}} /X_{{\text{MgO}}} )^{{\text{olivine}}} (X_{{\text{MgO}}} /X_{{\text{FeO}}} )^{{\text{liquid}}}$$ also increases with increasing pressure and decreasing temperature. Thus, unless these four variables (P, T, xxx, silicate composition) are known for a natural magma, K′ D and probably K D are variables, and the Mg/(Mg+∑ Fe) of such a magma cannot be correlated to that of the parent. The K D determined at 1 atm pressure by Roeder and Emslie has frequently been used to test whether the Mg/(Mg+∑ Fe) ratios of experimentally formed liquids at high pressure in equilibrium with olivine of known Fo content represent the equilibrium Mg/(Mg+Fe2+) of this liquid, assuming that ∑Fe=Fe2+ and that K′ D does not vary with P, T, and composition of the system. Published data demonstrate that the oxygen fugacities of the experimental designs employed by different laboratories vary between those of the magnetite-hematite and magnetite-wüstite buffers (6 orders of magnitude), resulting in K′ D between 0.04 and 0.31 at 1050° C and 15 kbar, for example. Thus, published arguments as to whether the quenched liquids represent equilibrium compositions based on iron-magnesium partitioning are inadequate. The effects of P, T, xxx, and the composition of the starting material must also be considered.  相似文献   

2.
Interaction between slab-derived melt and mantle peridotite and the role of slab melt as a metasomatizing agent in the sub-arc mantle is being increasingly recognized. Adakite, the slab melt erupted on the surface, usually exhibits anomalously high MgO, CaO, Cr and Ni contents that indicate interaction with mantle peridotitite. Here we note that Cenozoic adakites have Na2O contents below 5.8 wt.% with ∼95% samples lower than 5.0 wt.%, and are generally depleted in this component relative to experimental basalt partial melts (mostly beyond 5.0 wt.% and up to 9.0 wt.% Na2O) produced under 1.5-3.0 GPa conditions that are most relevant to adakite production. We interpret the adakite Na depletion to be also a consequence of the melt / rock reaction that takes place within the hot mantle wedge. During ascent and reaction with mantle peridotite, primary adakite melts gain mantle components MgO, CaO, Cr and Ni but lose Na2O, SiO2 and perhaps K2O to the mantle, leading to Na-rich mantle metasomatism. Selective assimilation of predominately mantle clinopyroxene, some spinel and minor olivine at high T/P has been considered to be an important process in producing high-Mg adakites from primary low-Mg slab melts [Killian, R., Stern, C. R., 2002. Constraints on the interaction between slab melts and the mantle wedge from adakitic glass in peridotite xenoliths. Eur. J. Mineral. 14, 25-36]. In such a process, Na depletion in the assimilated melt is the result of dilution due to the increase in melt mass. Phase relationships in the reaction system siliceous melt + peridotite and quantitative calculation suggest that assimilation of mantle clinopyroxene, olivine and spinel and fractional crystallization of sodic amphibole and orthopyroxene, under conditions of moderate T/P and increasing melt mass, is also an important process that modifies the composition of adakites and causes the Na depletion.  相似文献   

3.
The geochemical partitioning of bromine between hydrous haplogranitic melts, initially enriched with respect to Br and aqueous fluids, has been continuously monitored in situ during decompression. Experiments were carried out in diamond anvil cells from 890 °C to room temperature and from 1.7 GPa to room pressure, typically from high P, T conditions corresponding to total miscibility (presence of a supercritical fluid). Br contents were measured in aqueous fluids, hydrous melts and supercritical fluids. Partition coefficients of bromine were characterized at pressure and temperature between fluids, hydrous melts and/or glasses, as appropriate: DBrfluid/melt = (Br)fluid/(Br)melt, ranges from 2.18 to 9.2 ± 0.5 for conditions within the ranges 0.66-1.7 GPa, 590-890 °C; and DBrfluid/glass = (Br)fluid/(Br)glass ranges from 60 to 375 at room conditions. The results suggest that because high pressure melts and fluids are capable of accepting high concentrations of bromine, this element may be efficiently removed from the slab to the mantle source of arc magmas. We show that Br may be highly concentrated in subduction zone magmas and strongly enriched in subduction-related volcanic gases, because its mobility is strongly correlated with that of water during magma degassing. Furthermore, our experimental results suggest that a non negligible part of Br present in the subducted slab may remain in the down-going slab, being transported toward the transition zone. This indicates that the Br cycle in subduction zones is in fact divided in two related but independent parts: (1) a shallower one where recycled Br may leave the slab with a water and silica-bearing “fluid” leading to enriched arc magmas that return Br to the atmosphere. (2) A deeper cycle where Br may be recycled back to the mantle maybe to the transition zone, where it may be present in high pressure water-rich metasomatic fluids.  相似文献   

4.
We have measured liquid Fe metal-liquid silicate partitioning (Di) of tellurium, selenium, and sulfur over a range of pressure, temperature, and oxygen fugacity (1-19 GPa, 2023-2693 K, fO2 −0.4 to −5.5 log units relative to the iron-wüstite buffer) to better assess the role of metallic melts in fractionating these elements during mantle melting and early Earth evolution. We find that metal-silicate partitioning of all three elements decreases with falling FeO activity in the silicate melt, and that the addition of 5-10 wt% S in the metal phase results in a 3-fold enhancement of both DTe and DSe. In general, Te, Se, and S all become more siderophile with increasing pressure, and less siderophile with increasing temperature, in agreement with previous work. In all sulfur-bearing experiments, DTe is greater than DSe or DS, with the latter two being similar over a range of P and T. Parameterized results are used to estimate metal-silicate partitioning at the base of a magma ocean which deepens as accretion progresses, with the equilibration temperature fixed at the peridotite liquidus. We show that during accretion, Te behaves like a highly siderophile element, with expected core/mantle partitioning of >105, in contrast to the observed core/mantle ratio of ∼100. Less extreme differences are observed for Se and S, which yielded core/mantle partitioning 100- to 10 times higher, respectively, than the observed value. Addition of ∼0.5 wt% of a meteorite component (H, EH or EL ordinary chondrite) is sufficient to raise mantle abundances to their current level and erase the original interelement fractionation of metal-silicate equilibrium.  相似文献   

5.
The divalent cation distribution in olivine (Mg, Fe)2SiO4 under high pressure and temperature was studied to clarify the detailed state of olivine in the mantle. Single crystal samples were heated for a sufficient period of time for the cations to migrate and quenched fast enough to preserve the equilibrated state under high pressures, and the crystal structure was determined with X-ray method. The pressure effect on the distribution coefficient K D[= (Fe/Mg) M1/(Fe/Mg) M2] was determined for the first time; dK D/dP?0.02 GPa?1. A set of five thermodynamic parameters required to describe the regular solution model was determined from data concerning the pressure dependence and the known temperature and compositional effects. As a result we have shown how K D depends on pressure, temperature, and composition. The notable feature clarified is the very large contribution of nonideality in the olivine solid solution. The K D of olivine crystals in the mantle is predicted; K D increases to ～ 2.2 at the depth of 400 km, in contrast to 0.9 ～ 1.2 of natural samples available at the surface of the Earth.  相似文献   

6.
We performed density measurements on a synthetic equivalent of lunar Apollo 17 74,220 “orange glass”, containing 9.1 wt% TiO2, at superliquidus conditions in the pressure range 0.5-8.5 GPa and temperature range 1723-2223 K using the sink/float technique. In the lunar pressure range, two experiments containing pure forsterite (Fo100) spheres at 1.0 GPa and 1727 K, and at 1.3 GPa-1739 K, showed neutral buoyancies, indicating that the density of molten orange glass was equal to the density of Fo100 at these conditions (3.09 ± 0.02 g cm−3). A third tight sink/float bracket using Fo90 spheres corresponds to a melt density of 3.25 ± 0.02 g cm−3 at ∼2.8 GPa and ∼1838 K.Our data predict a density crossover for the molten orange glass composition with equilibrium orthopyroxene at ∼2.8 GPa, equivalent to a depth of ∼600 km in the lunar mantle, and a density of ∼3.25 g cm−3. This crossover depth is close to the orange glass multiple saturation point, representing its minimum formation depth, at the appropriate oxygen fugacity (2.8-2.9 GPa). A density crossover with equilibrium olivine is predicted to fall outside the lunar pressure range (>4.7 GPa), indicating that molten orange glass is always less dense than its equilibrium olivines in the Moon. Our data therefore suggest that that lunar liquids with orange glass composition are buoyant with respect to their source region at P < ∼2.8 GPa, enabling their initial rise to the surface without the need for additional external driving forces.Fitting the density data to a Birch-Murnaghan equation of state at 2173 K leads to an array of acceptable solutions ranging between 16.1 and 20.3 GPa for the isothermal bulk modulus K2173 and 3.6-8 for its pressure derivative K′, with best-fit values K2173 = 18.8 GPa and K′ = 4.4 when assuming a model 1 bar density value of 2.86 g cm−3. When assuming a slightly lower 1 bar density value of 2.84 g cm−3 we find a range for K2173 of 14.4-18.0 and K′ 3.7-8.7, with best-fit values of 17.2 GPa and 4.5, respectively.  相似文献   

7.
A synthetic composition representing the Yamato 980459 martian basalt (shergottite) has been used to carry out phase relation, and rare earth element (REE) olivine and pyroxene partitioning experiments. Yamato 980459 is a sample of primitive basalt derived from a reduced end-member among martian mantle sources. Experiments carried out between 1-2 GPa and 1350-1650 °C simulate the estimated pressure-temperature conditions of basaltic melt generation in the martian mantle. Olivine-melt and orthopyroxene-melt partition coefficients for La, Nd, Sm, Eu, Gd and Yb (DREE values) were determined by LA-ICPMS, and are similar to the published values for terrestrial basaltic systems. We have not detected significant variation in D-values with pressure over the range investigated, and by comparison with previous studies carried out at lower pressure.We apply the experimentally obtained olivine-melt and orthopyroxene-melt DREE values to fractional crystallization and partial melting models to develop a three-stage geochemical model for the evolution of martian meteorites. In our model we propose two ancient (∼4.535 Ga) sources: the Nakhlite Source, located in the shallow mantle, and the Deep Mantle Source, located close to the martian core-mantle boundary. These two sources evolved distinctly on the ε143Nd evolution curve due to their different Sm/Nd ratios. By partially melting the Nakhlite Source at ∼1.3 Ga, we are able to produce a slightly depleted residue (Nakhlite Residue). The Nakhlite Residue is left undisturbed until ∼500 Ma, at which point the depleted Deep Mantle Source is brought up by a plume mechanism carrying with it high heat flow, melts and isotopic signatures of the deep mantle (e.g., ε182W, ε142Nd, etc.). The plume-derived Deep Mantle Source combines with the Nakhlite Residue producing a mixture that becomes a mantle source (herein referred to as “the Y98 source”) for Yamato 980459 and the other depleted shergottites with the characteristic range of Sm/Nd ratios of these meteorites. The same hot plume provides a heat source for the formation of enriched and intermediate shergottites. Our model reproduces the REE patterns of nakhlites and depleted shergottites and can explain high ε143Nd in depleted shergottites. Furthermore, the model results can be used to interpret whole rock Rb-Sr and Sm-Nd ages of shergottites.  相似文献   

8.
FTIR spectroscopy of OH in olivine: A new tool in kimberlite exploration   总被引：1，自引：0，他引：1  
Our study of olivines from Canadian kimberlites shows that the application of FTIR spectroscopy significantly improves the reliability of olivine as a kimberlite indicator mineral (KIM). We have developed an algorithm that yields the water concentration and the normalized intensity of the OH IR absorption band at 3572 cm−1 from unpolished olivine grains of unknown thickness. For 80% of kimberlitic olivines these two parameters are significantly higher than those for olivines from non-kimberlitic magmas and consequently, olivines with water concentrations >60 ppm and a strong absorption band at 3572 cm−1 can be reliably classified as being kimberlitic.We have identified two major spectral features in the OH absorption bands of kimberlitic olivines that allow for a more detailed classification: (a) the presence of three types of high-requency OH absorption bands (Group 1A, 1B and 1C) and (b) the proportion of low-frequency OH absorption bands (Group 2) relative to high-frequency bands (Group 1). Comparison of our results with experimental studies suggests that differences within Group 1 OH absorption bands are due to different pressures of crystallization or hydrogenation. The three identified types of Group 1 OH absorption bands approximately correspond to high (P > 2 GPa, Group 1A), moderate (2-1 GPa, Group 1B), and low (<1 GPa, Group 1C) pressures of hydrogenation. Group 2 OH IR absorption bands in olivines with NiO > 3500 ppm are interpreted to reflect olivine-orthopyroxene equilibria and hence are indicative of xenocrystic olivine derived from lherzolitic or harzburgitic mantle sources. Interaction of xenocrystic olivine with hydrous kimberlitic melts with low silica activity likely will cause a gradual increase in Group 1 absorption bands. Therefore, FTIR spectra of olivine can be used to obtain qualitative estimates of the duration of interaction between mantle material and a kimberlitic melt.In addition to applications in kimberlite and diamond exploration, FTIR spectra of olivine phenocrysts, combined with mineral chemical data, may also provide insights into kimberlite evolution. Our data suggest that in some instances the ascent of kimberlitic magmas could have been interrupted at or near the Moho, followed by olivine crystallization and exsolution of aqueous fluids.  相似文献   

9.
Olivine dissolution in basaltic melt   总被引：1，自引：0，他引：1  
The main purpose of this work is to understand and quantify diffusive and convective olivine dissolution in basaltic melt. Crystal dissolution and growth in a magma chamber is often accompanied by the descent or ascent of the crystal in the chamber due to gravity. The motion induces convection that enhances mass transport. Such convective dissolution and growth rates have not been quantified before. MgO diffusivity in the melt (DMgO), MgO concentration of the interface melt (C0) and the effective thickness of the compositional boundary layer (δ) are necessary parameters to model the convective dissolution. Experiments of non-convective olivine dissolution in a basaltic melt were conducted at 1271-1480 °C and 0.47-1.42 GPa in a piston-cylinder apparatus. At specific temperature and pressure conditions, multiple experiments of different durations show that the interface melt reaches near-saturation within 2 min. Therefore, diffusion, not interface reaction, is the rate-controlling step for non-convective olivine dissolution in basaltic melt. The compositional profile length and olivine dissolution distance are proportional to the square root of experimental duration, consistent with diffusive dissolution. DMgO and C0 are obtained from the experimental results. DMgO displays Arrhenian dependence on temperature, but the pressure dependence is small and not resolved. C0 increases with increasing temperature and decreases with increasing pressure. Comparison with literature data shows that DMgO depends strongly on the initial melt composition, while C0 does not. δ is estimated from fluid dynamics. DMgO/δ, which characterizes the kinetic and dynamic aspects of convective crystal dissolution, is parameterized as a function of temperature, pressure, and olivine composition. Convective olivine dissolution rate in basaltic melt can be conveniently calculated from the model results. Application to convective crystal growth and xenolith digestion is discussed.  相似文献   

10.
The relative incompatibility of Ar and K are fundamental parameters in understanding the degassing history of the mantle. Clinopyroxene is the main host for K in most of the upper mantle, playing an important role in controlling the K/Ar ratio of residual mantle and the subsequent time-integrated evolution of 40Ar/36Ar ratios. Clinopyroxene also contributes to the bulk Ar partition coefficient that controls the Ar degassing rate during mantle melting. The partitioning of Ar and K between clinopyroxene and quenched silicate melt has been experimentally determined from 1 to 8 GPa for the bulk compositions Ab80Di20 (80 mol% albite-20 mol% diopside) and Ab20Di80 with an ultraviolet laser ablation microprobe (UVLAMP) technique for Ar analysis and the ion microprobe for K. Data for Kr (UVLAMP) and Rb (ion probe) have also been determined to evaluate the role of crystal lattice sites in controlling partitioning. By excluding crystal analyses that show evidence of glass contamination, we find relatively constant Ar partition coefficients (DAr) of 2.6 × 10−4 to 3.9 × 10−4 for the Ab80Di20 system at pressures from 2 to 8 GPa. In the Ab20Di80 system, DAr shows similar low values of 7.0 × 10−5 and 3.0 × 10−4 at 1 to 3 GPa. All these values are several orders of magnitude lower than previous measurements on separated crystal-glass pairs.DK is 10 to 50 times greater than DRb for all experiments, and both elements follow parallel trends with increasing pressure, although these trends are significantly different in each system studied. The DK values for clinopyroxene are at least an order of magnitude greater than DAr under all conditions investigated here, but DAr appears to show more consistent behavior between the two systems than K or Rb. The partitioning behavior of K and Rb can be explained in terms of combined pressure, temperature, and crystal chemistry effects that result in changes for the size of the clinopyroxene M2 site. In the Ab20Di80 system, where clinopyroxene is diopside rich at all pressures, DK and DRb increase with pressure (and temperature) in an analogous fashion to the well-documented behavior of Na. For the Ab80Di20 system, the jadeite content of the clinopyroxene increases from 22 to 75 mol% with pressure resulting in a contraction of the M2 site. This has the effect of discriminating against the large K+ and Rb+ ions, thereby countering the effect of increasing pressure. As a consequence DK and DRb do not increase with pressure in this system.In contrast to the alkalis (Na, K, and Rb), DKr values are similar to DAr despite a large difference in atomic radius. This lack of discrimination (and the constant DAr over a range of crystal compositions) is also consistent with incorporation of these heavier noble gases at crystal lattice sites and a predicted consequence of their neutrality or “zero charge.” Combined with published DAr values for olivine, our results confirm that magma generation is an efficient mechanism for the removal of Ar from the uppermost 200 km of the mantle, and that K/Ar ratios in the residuum are controlled by the amount of clinopyroxene. Generally, Ar is more compatible than K during mantle melting because DAr for olivine is similar to DK for clinopyroxene. As a result, residual mantle that has experienced variable amounts of melt extraction may show considerable variability in time-integrated 36Ar/40Ar.  相似文献   

11.
Major-element compositions of minerals in peridotite xenoliths from the Lac de Gras kimberlites provide constraints on the mode of lithosphere formation beneath the central Slave Craton, Canada. Magnesia contents of reconstructed whole rocks correlate positively with NiO and negatively with CaO contents, consistent with variable partial melt extraction. Alumina and Cr2O3 contents are broadly positively correlated, suggestive of melt depletion in the absence of a Cr–Al phase. Garnet modes are high at a given Al2O3 content (a proxy for melt depletion), falling about a 7 GPa melt depletion model. These observations, combined with high olivine Mg# and major-element relationships of FeO-poor peridotites (<7.5 wt%) indicative of melt loss at pressures >3 GPa (residual FeO content being a sensitive indicator of melt extraction pressure), and similar high pressures of last equilibration (∼4.2 to 5.8 GPa), provide multiple lines of evidence that the mantle beneath the central Slave Craton has originated as a residue from high-pressure melting, possibly during plume subcretion. Apparent low melt depletion pressures for high-FeO peridotites (>7.5 wt%) could suggest formation in an oceanic setting, followed by subduction to their depth of entrainment. However, these rocks, which are characterised by low SiO2 contents (<43 wt%), are more likely to be the result of post-melting FeO-addition, leading to spuriously low estimates of melt extraction pressures. They may have reacted with a silica-undersaturated melt that dissolved orthopyroxene, or experienced olivine injection by crystallising melts. A secular FeO-enrichment of parts of the deep mantle lithosphere is supported by lower average Mg# in xenolithic olivine (91.7) compared to olivine inclusions in diamond (92.6).  相似文献   

12.
A non-stoichiometric sample of spinel with composition T(Mg0.4Al0.6)M(Al1.8□0.2)O4 was investigated by single-crystal X-ray diffraction in situ up to about 8.7 GPa using a diamond anvil cell. The P(V) data were fitted using a third-order Birch-Murnaghan equation of state and the unit-cell volume V0, the bulk modulus KT0 and its first pressure derivative K′ were refined simultaneously providing the following coefficients: V0 = 510.34(6) Å3, KT0 = 171(2) GPa, K′ = 7.3(6). This KT0 value represents the lowest ever found for spinel crystal structures. Comparing our data with a stoichiometric and natural MgAl2O4 (pure composition) we observe a decrease in KT0 by about 11.5% and a strong increase in K′ by about 33%. These results demonstrate how an excess of Al accompanied by the formation of significant cation vacancies at octahedral site strongly affects the thermodynamic properties of spinel structure. If we consider that the estimated mantle composition is characterized by 3-5% of Al2O3 this could imply an Mg/Al substitution with possible formation of cation vacancies. The results of our study indicate that geodynamic models should take into account the potential effect of Mg/Al substitution on the incompressibility of the main mantle-forming minerals (olivine, wadsleyite, ringwoodite, Mg-perovskite).  相似文献   

13.
Water speciation in rhyolitic melts with dissolved water ranging from 0.8 to 4 wt% under high pressure was investigated. Samples were heated in a piston-cylinder apparatus at 624-1027 K and 0.94-2.83 GPa for sufficient time to equilibrate hydrous species (molecular H2O and hydroxyl group, H2Om + O ? 2OH) in the melts and then quenched roughly isobarically. The concentrations of both hydrous species in the quenched glasses were measured with Fourier transform infrared (FTIR) spectroscopy. For the samples with total water content less than 2.7 wt%, the equilibrium constant (K) is independent of total H2O concentration. Incorporating samples with higher water contents, the equilibrium constant depends on total H2O content, and a regular solution model is used to describe the dependence. K changes with pressure nonmonotonically for samples with a given water content at a given temperature. The equilibrium constant does not change much from ambient pressure to 1 GPa, but it increases significantly from 1 to 3 GPa. In other words, more molecular H2O reacts to form hydroxyl groups as pressure increases from 1 GPa, which is consistent with breakage of tetrahedral aluminosilicate units due to compression of the melt induced by high pressure. The effect of 1.9 GPa (from 0.94 to 2.83 GPa) on the equilibrium constant at 873 K is equivalent to a temperature effect of 49 K (from 873 K to 922 K) at 0.94 GPa. The results can be used to evaluate the role of speciation in water diffusion, to estimate the apparent equilibrium temperature, and to infer viscosity of hydrous rhyolitic melts under high pressure.  相似文献   

14.
Phase relations of phlogopite with magnesite from 4 to 8 GPa   总被引：2，自引：2，他引：0  
To evaluate the stability of phlogopite in the presence of carbonate in the Earth’s mantle, we conducted a series of experiments in the KMAS–H2O–CO2 system. A mixture consisting of synthetic phlogopite (phl) and natural magnesite (mag) was prepared (phl90-mag10; wt%) and run at pressures from 4 to 8 GPa at temperatures ranging from 1,150 to 1,550°C. We bracketed the solidus between 1,200 and 1,250°C at pressures of 4, 5 and 6 GPa and between 1,150 and 1,200°C at a pressure of 7 GPa. Below the solidus, phlogopite coexists with magnesite, pyrope and a fluid. At the solidus, magnesite is the first phase to react out, and enstatite and olivine appear. Phlogopite melts over a temperature range of ~150°C. The amount of garnet increases above solidus from ~10 to ~30 modal% to higher pressures and temperatures. A dramatic change in the composition of quench phlogopite is observed with increasing pressure from similar to primary phlogopite at 4 GPa to hypersilicic at pressures ≥5 GPa. Relative to CO2-free systems, the solidus is lowered such, that, if carbonation reactions and phlogopite metasomatism take place above a subducting slab in a very hot (Cascadia-type) subduction environment, phlogopite will melt at a pressure of ~7.5 GPa. In a cold (40 mWm−2) subcontinental lithospheric mantle, phlogopite is stable to a depth of 200 km in the presence of carbonate and can coexist with a fluid that becomes Si-rich with increasing pressure. Ascending kimberlitic melts that are produced at greater depths could react with peridotite at the base of the subcontinental lithospheric mantle, crystallizing phlogopite and carbonate at a depth of 180–200 km.  相似文献   

15.
We report experimentally determined 1 atm olivine/melt DNa partitioning data for low fO2, a variety of melt compositions and a temperature range of 1325-1522 °C. We demonstrated that high-current electron microprobe analyses (EPMA, I = 500 nA, 600 s on the peak) allow quantitative determination of Na2O in olivine down to ∼10 μg/g. The mean olivine/melt DNa from 12 experimental runs is 0.0031 ± 0.0007 (1σ). This is the recommended value for low pressures and a wide range of natural compositions.This result is applied to the problem of the origin of alkalis in chondrules and the formation of chondritic refractory forsterite grains. The data on Semarkona (LL3.0) chondrules show that Na2O is primordial and was present during olivine crystallization. For refractory forsterite grains from Murchison (CM2), we demonstrate that high CaO contents are not a result of equilibration with Na2O-rich melts, but require high activities of CaO during their formation.  相似文献   

16.
We determined the solubility limit of Pt in molten haplo-basalt (1 atm anorthite-diopside eutectic composition) in piston-cylinder and multi-anvil experiments at pressures between 0.5 and 14 GPa and temperatures from 1698 to 2223 K. Experiments were internally buffered at ∼IW + 1. Pt concentrations in quenched-glass samples were measured by laser-ablation inductively coupled-plasma mass spectrometry (LA-ICPMS). This technique allows detection of small-scale heterogeneities in the run products while supplying three-dimensional information about the distribution of Pt in the glass samples. Analytical variations in 195Pt indicate that all experiments contain Pt nanonuggets after quenching. Averages of multiple, time-integrated spot analyses (corresponding to bulk analyses) typically have large standard deviations, and calculated Pt solubilities in silicate melt exhibit no statistically significant covariance with temperature or pressure. In contrast, averages of minimum 195Pt signal levels show less inter-spot variation, and solubility shows significant covariance with pressure and temperature. We interpret these results to mean that nanonuggets are not quench particles, that is, they were not dissolved in the silicate melt, but were part of the equilibrium metal assemblage at run conditions. We assume that the average of minimum measured Pt abundances in multiple probe spots is representative of the actual solubility. The metal/silicate partition coefficients (Dmet/sil) is the inverse of solubility, and we parameterize Dmet/sil in the data set by multivariate regression. The statistically robust regression shows that increasing both pressure and temperature causes Dmet/silto decrease, that is, Pt becomes more soluble in silicate melt. Dmet/sil decreases by less than an order of magnitude at constant temperature from 1 to 14 GPa, whereas isobaric increase in temperature produces a more dramatic effect, with Dmet/sil decreasing by more than one order of magnitude between 1623 and 2223 K. The Pt abundance in the Earth’s mantle requires that Dmet/sil is ∼1000 assuming core-mantle equilibration. Geochemical models for core formation in Earth based on moderately and slightly siderophile elements are generally consistent with equilibrium metal segregation at conditions generally in the range of 20-60 GPa and 2000-4000 K. Model extrapolations to these conditions show that the Pt abundance of the mantle can only be matched if oxygen fugacity is high (∼IW) and if Pt mixes ideally in molten iron, both very unlikely conditions. For more realistic values of oxygen fugacity (∼IW − 2) and experimentally-based constraints on non-ideal mixing, models show that Dmet/sil would be several orders of magnitude too high even at the most favorable conditions of pressure and temperature. These results suggest that the mantle Pt budget, and by implication other highly siderophile elements, was added by late addition of a ‘late veneer’ phase to the accreting proto-Earth.  相似文献   

17.
The ultrabasic–basic magmatic evolution of the lower mantle material includes important physicochemical phenomena, such as the stishovite paradox and the genesis of superdeep diamonds. Stishovite SiO2 and periclase–wüstite solid solutions, (MgO · FeO)ss, associate paradoxically in primary inclusions of superdeep lower mantle diamonds. Under the conditions of the Earth’s crust and upper mantle, such oxide assemblages are chemically impossible (forbidden), because the oxides MgO and FeO and SiO2 react to produce intermediate silicate compounds, enstatite and ferrosilite. Experimental and physicochemical investigations of melting phase relations in the MgO–FeO–SiO2–CaSiO3 system at 24 GPa revealed a peritectic mechanism of the stishovite paradox, (Mg, Fe)SiO3 (bridgmanite) + L = SiO2 + (Mg, Fe)O during the ultrabasic–basic magmatic evolution of the primitive oxide–silicate lower mantle material. Experiments at 26 GPa with oxide–silicate–carbonate–carbon melts, parental for diamonds and primary inclusions in them, demonstrated the equilibrium formation of superdeep diamonds in association with ultrabasic, (Mg, Fe)SiO3 (bridgmanite) + (MgO · FeO)ss (ferropericlase), and basic minerals, (FeO · MgO)ss (magnesiowüstite) + SiO2 (stishovite). This leads to the conclusion that a peritectic mechanism, similar to that responsible for the stishovite paradox in the pristine lower mantle material, operates also in the parental media of superdeep diamonds. Thus, this mechanism promotes both the ultrabasic–basic evolution of primitive oxide–silicate magmas in the lower mantle and oxide–silicate–carbonate melts parental for superdeep diamonds and their paradoxical primary inclusions.  相似文献   

18.
Here we present the first set of metal-silicate partitioning data for Cs, which we use to examine whether the primitive mantle depletion of Cs can be attributed to core segregation. Our experiments independently varied pressure from 5 to 15 GPa, temperature from 1900 to 2400 °C, metallic sulfur content from pure Fe to pure FeS, silicate melt polymerization, expressed as a ratio of non-bridging oxygens to tetrahedrally coordinated cations (nbo/t) from 1.26 to 3.1, and fO2 from two to four log units below the iron-wüstite buffer. The most important controls on the partitioning behavior of alkalis were the metallic sulfur content, expressed as XS, and the nbo/t of the silicate liquid. Normalization of XS to 0.5 yielded the following expressions for D-values as a function of nbo/t: log DNa = −2.0 + 0.44 × (nbo/t), log DK = −2.4 + 0.67 × ( nbo/t), and log DCs = −3.2 + 1.17 × (nbo/t). Normalization of nbo/t to 2.7 resulted in the following equations for D-values as a function of S content: log DNa = −4.1 + 6.4 × XS, log DK = −7.7 + 13.9 × XS, and log DCs = −12.1 + 23.3 × XS.There appears to be a negative pressure effect up to 15 GPa, but it should be noted that this trend was not present before normalization, and is based on only two measurements. There is a positive trend in cesium’s metal-silicate partition coefficient with increasing temperature. DCs exhibits the largest change and increased by a factor of three over 500 °C. The effect of oxygen fugacity has not been precisely determined but in general, lowering fO2 by two log units resulted in a rise in all D-values of approximately an order of magnitude. In general, the sensitivity of partition coefficients to changing parameters increased with atomic number.The highest D-value for Cs observed in this study is 0.345, which was obtained at nbo/t of 2.7 and a metal phase of pure FeS. This metallic composition has far more S than has been suggested for any credible core-forming metal. We therefore conclude that the depletion of Cs in Earth’s mantle is either caused by radically different behavior of Cs at pressures higher than 15 GPa or is not related to core formation. Even so, we have shown that a planet with a sufficient S inventory may incorporate significant amounts of alkali elements into its core.  相似文献   

19.
Seventeen shock-recovery experiments were performed on powder mixtures of one part (by weight) olivine (St. John's forsterite) plus two parts silica glass (pure vitreous silica) in order to characterize the physical and chemical interaction of two chemically incompatible components during shock. Powders of <45 m grain size were shocked by impact of projectiles launched from a 20 mm gun which created pressures ranging from 6.2 to 64.2 GPa (1 GPa= 10kbar).Petrographie features observed in thin section attest to mechanical and thermal metamorphism. Samples shocked to pressures from 6.2 to 39.3 GPa form compacted, mosaic, granular aggregates with fractured and strained grains. Samples shocked to pressures from 42.9 to 64.2 GPa form vesicular, mixed melts containing flow schlieren and relict olivine fragments. Petrographic disequilibrium is manifested in cataclastic textures showing deformational anisotropy and in thermal effects showing non-uniform intergranular melting. This disequilibrium is caused by an irregular pressure distribution resulting from the rapid collapse of pore spaces.The chemical composition of the shock melts are similar in each of six samples shocked to pressures of 42.9 to 64.2 GPa. Melt chemistry is bimodal in each sample. Colorless melts are 99.9% SiO2 and represent pure silica glass melts; pale to dark green melts range in composition from 47% to 64% SiO2 and represent a progressive mixture of olivine melt (41% SiO2) with silica glass melt. Surprisingly, the compositions of the colored glasses are intermediate between the composition of pure olivine and the bulk composition of the original starting material (79% SiO2) and are similar to enstatitic pyroxene compositions (50% to 57% SiO2; 33% to 37% MgO). Although bulk compositions of shocked samples are unchanged, the creation of melts with pyroxene compositions instead of bulk sample compositions may indicate that an incipient eutectic-type fusion may have occurred in small olivine-normative domains surrounding individual olivine grains. Chemical disequilibrium is evidenced by the creation of these olivine-normative melts from a quartz-normative starting compositions and by the chemical heterogeneity in the melts.  相似文献   

20.
Thirty-three whole-rock drill core samples and thirteen olivine, chromite, and sulfide separates from three differentiated komatiite lava flows at Alexo and Pyke Hill, Canada, were analyzed for PGEs using the Carius tube digestion ID-ICP-MS technique. The emplaced lavas are Al-undepleted komatiites with ∼27% MgO derived by ∼50% partial melting of LILE-depleted Archean mantle. Major and minor element variations during and after emplacement were controlled by 30 to 50% fractionation of olivine Fo93-94. The emplaced lavas are characterized by (Pd/Ir)N = 4.0 to 4.6, (Os/Ir)N = 1.07, and Os abundances of ∼2.3 ppb. Variations in PGE abundances within individual flows indicate that Os and Ir were compatible (bulk DOs,Ir = 2.4-7.1) and that Pt and Pd were incompatible (bulk DPt,Pd < 0.2) during lava differentiation, whereas bulk DRu was close to unity. Analyses of cumulus olivine separates indicate that PGEs were incompatible in olivine (DPGEsOl-Liq = 0.04-0.7). The bulk fractionation trends cannot be accounted for by fractionation of olivine alone, and require an unidentified Os-Ir-rich phase. The composition of the mantle source (Os = 3.9 ppb, Ir = 3.6 ppb, Ru = 5.4 ppb, Pt and Pd = 5.7 ppb) was constrained empirically for Ru, Pt, and Pd; the Os/Ir ratio was taken to be identical to that in the emplaced melt, and the Ru/Ir ratio was taken to be chondritic, so that the absolute IPGE abundances of the source were determined by Ru. This is the first estimate of the PGE composition of a mantle source derived from analyses of erupted lavas. The suprachondritic Pd/Ir and Os/Ir of the inferred Abitibi komatiite mantle source are similar to those in off-craton spinel lherzolites, orogenic massif lherzolites, and enstatite chondrites, and are considered to be an intrinsic mantle feature. Bulk partition coefficients for use in komatiite melting models derived from the source and emplaced melt compositions are: DOs,Ir = 2.3, DRu = 1.0, DPt,Pd = 0.07. Ruthenium abundances are good indicators of absolute IPGE abundances in the mantle sources of komatiite melts with 26 to 29% MgO, as Ru fractionates very little during both high degrees of partial melting and lava differentiation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号