共查询到20条相似文献，搜索用时 31 毫秒
1.
Extended common‐image‐point gathers (CIP) constructed by wide‐azimuth TI wave‐equation migration contain all the necessary information for angle decomposition as a function of the reflection and azimuth angles at selected locations in the subsurface. The aperture and azimuth angles are derived from the extended images using analytic relations between the space‐ and time‐lag extensions using information which is already available at the time of migration, i.e. the anisotropic model parameters. CIPs are cheap to compute because they can be distributed in the image at the most relevant positions, as indicated by the geologic structure. If the reflector dip is known at the CIP locations, then the computational cost can be reduced by evaluating only two components of the space‐lag vector. The transformation from extended images to angle gathers is a planar Radon transform which depends on the local medium parameters. This transformation allows us to separate all illumination directions for a given experiment, or between different experiments. We do not need to decompose the reconstructed wavefields or to choose the most energetic directions for decomposition. Applications of the method include illumination studies in complex areas where ray‐based methods fail, and assuming that the subsurface illumination is sufficiently dense, the study of amplitude variation with aperture and azimuth angles. 相似文献
2.
Wavefield‐based migration velocity analysis using the semblance principle requires computation of images in an extended space in which we can evaluate the imaging consistency as a function of overlapping experiments. Usual industry practice is to assemble those seismic images in common‐image gathers that represent reflectivity as a function of depth and extensions, e.g., reflection angles. We introduce extended common‐image point (CIP) gathers constructed only as a function of the space‐ and time‐lag extensions at sparse and irregularly distributed points in the image. Semblance analysis using CIP's constructed by this procedure is advantageous because we do not need to compute gathers at regular surface locations and we do not need to compute extensions at all depth levels. The CIP's also give us the flexibility to distribute them in the image at irregular locations aligned with the geologic structure. Furthermore, the CIP's remove the depth bias of common‐image gathers constructed as a function of the depth axis. An interpretation of the CIP's using the scattering theory shows that they are scattered wavefields associated with sources and receivers inside the subsurface. Thus, when the surface wavefields are correctly reconstructed, the extended CIP's are characterized by focused energy at the origin of the space‐ and time‐lag axes. Otherwise, the energy defocuses from the origin of the lag axes proportionally with the cumulative velocity error in the overburden. This information can be used for wavefield‐based tomographic updates of the velocity model, and if the velocity used for imaging is correct, the coordinate‐independent CIP's can be a decomposed as a function of the angles of incidence. 相似文献
3.
研究与实践表明,对于长偏移距、宽方位地震数据,忽略各向异性会明显降低成像质量,影响储层预测与描述的精度.针对典型的横向各向同性(TI)介质,本文面向深度域构造成像与偏移速度分析的需要,研究基于射线理论的局部角度域叠前深度偏移成像方法.它除了像传统Kirchhoff叠前深度偏移那样输出成像剖面和炮检距域的共成像点道集,还遵循地震波在成像点处的局部方向特征、基于扩展的脉冲响应叠加原理获得入射角度域和照明角度域的成像结果.为了方便快捷地实现TI介质射线走时与局部角度信息的计算,文中讨论和对比了两种改进的射线追踪方法:一种采用从经典各向异性介质射线方程演变而来的由相速度表征的简便形式;另一种采用由对称轴垂直的TI(即VTI)介质声学近似qP波波动方程推导出来的射线方程.文中通过坐标旋转将其扩展到了对称轴倾斜的TI(即TTI)介质.国际上通用的理论模型合成数据偏移试验表明,本文方法既适用于复杂构造成像,又可为TI介质深度域偏移速度分析与模型建立提供高效的偏移引擎. 相似文献
4.
5.
6.
Common‐midpoint moveout of converted waves is generally asymmetric with respect to zero offset and cannot be described by the traveltime series t2(x2) conventionally used for pure modes. Here, we present concise parametric expressions for both common‐midpoint (CMP) and common‐conversion‐point (CCP) gathers of PS‐waves for arbitrary anisotropic, horizontally layered media above a plane dipping reflector. This analytic representation can be used to model 3D (multi‐azimuth) CMP gathers without time‐consuming two‐point ray tracing and to compute attributes of PS moveout such as the slope of the traveltime surface at zero offset and the coordinates of the moveout minimum. In addition to providing an efficient tool for forward modelling, our formalism helps to carry out joint inversion of P and PS data for transverse isotropy with a vertical symmetry axis (VTI media). If the medium above the reflector is laterally homogeneous, P‐wave reflection moveout cannot constrain the depth scale of the model needed for depth migration. Extending our previous results for a single VTI layer, we show that the interval vertical velocities of the P‐ and S‐waves (VP0 and VS0) and the Thomsen parameters ε and δ can be found from surface data alone by combining P‐wave moveout with the traveltimes of the converted PS(PSV)‐wave. If the data are acquired only on the dip line (i.e. in 2D), stable parameter estimation requires including the moveout of P‐ and PS‐waves from both a horizontal and a dipping interface. At the first stage of the velocity‐analysis procedure, we build an initial anisotropic model by applying a layer‐stripping algorithm to CMP moveout of P‐ and PS‐waves. To overcome the distorting influence of conversion‐point dispersal on CMP gathers, the interval VTI parameters are refined by collecting the PS data into CCP gathers and repeating the inversion. For 3D surveys with a sufficiently wide range of source–receiver azimuths, it is possible to estimate all four relevant parameters (VP0, VS0, ε and δ) using reflections from a single mildly dipping interface. In this case, the P‐wave NMO ellipse determined by 3D (azimuthal) velocity analysis is combined with azimuthally dependent traveltimes of the PS‐wave. On the whole, the joint inversion of P and PS data yields a VTI model suitable for depth migration of P‐waves, as well as processing (e.g. transformation to zero offset) of converted waves. 相似文献
7.
Conventional seismic data processing methods based on post‐stack time migration have been playing an important role in coal exploration for decades. However, post‐stack time migration processing often results in low‐quality images in complex geological environments. In order to obtain high‐quality images, we present a strategy that applies the Kirchhoff prestack time migration (PSTM) method to coal seismic data. In this paper, we describe the implementation of Kirchhoff PSTM to a 3D coal seam. Meanwhile we derive the workflow of 3D Kirchhoff PSTM processing based on coal seismic data. The processing sequence of 3D Kirchhoff PSTM includes two major steps: 1) the estimation of the 3D root‐mean‐square (RMS) velocity field; 2) Kirchhoff prestack time migration processing. During the construction of a 3D velocity model, dip moveout velocity is served as an initial migration velocity field. We combine 3D Kirchhoff PSTM with the continuous adjustment of a 3D RMS velocity field by the criteria of flattened common reflection point gathers. In comparison with post‐stack time migration, the application of 3D Kirchhoff PSTM to coal seismic data produces better images of the coal seam reflections. 相似文献
8.
Paul Sava 《Geophysical Prospecting》2015,63(5):1086-1096
Waveform inversion is a velocity‐model‐building technique based on full waveforms as the input and seismic wavefields as the information carrier. Conventional waveform inversion is implemented in the data domain. However, similar techniques referred to as image‐domain wavefield tomography can be formulated in the image domain and use a seismic image as the input and seismic wavefields as the information carrier. The objective function for the image‐domain approach is designed to optimize the coherency of reflections in extended common‐image gathers. The function applies a penalty operator to the gathers, thus highlighting image inaccuracies arising from the velocity model error. Minimizing the objective function optimizes the model and improves the image quality. The gradient of the objective function is computed using the adjoint state method in a way similar to that in the analogous data‐domain implementation. We propose an image‐domain velocity‐model building method using extended common‐image‐point space‐ and time‐lag gathers constructed sparsely at reflections in the image. The gathers are effective in reconstructing the velocity model in complex geologic environments and can be used as an economical replacement for conventional common‐image gathers in wave‐equation tomography. A test on the Marmousi model illustrates successful updating of the velocity model using common‐image‐point gathers and resulting improved image quality. 相似文献
9.
Velocity model updating in prestack Kirchhoff time migration for PS converted waves: Part I – Theory
A velocity model updating approach is developed based on moveout analysis of the diffraction curve of PS converted waves in prestack Kirchhoff time migration. The diffraction curve can be expressed as a product of two factors: one factor depending on the PS converted‐wave velocity only, and the other factor depending on all parameters. The velocity‐dependent factor represents the hyperbolic behaviour of the moveout and the other is a scale factor that represents the non‐hyperbolic behaviour of the moveout. This non‐hyperbolic behaviour of the moveout can be corrected in prestack Kirchhoff time migration to form an inverse normal‐moveout common‐image‐point gather in which only the hyperbolic moveout is retained. This hyperbolic moveout is the moveout that would be obtained in an isotropic equivalent medium. A hyperbolic velocity is then estimated from this gather by applying hyperbolic moveout analysis. Theoretical analysis shows that for any given initial velocity, the estimated hyperbolic velocity converges by an iterative procedure to the optimal velocity if the velocity ratio is optimal or to a value closer to the optimal velocity if the velocity ratio is not optimal. The velocity ratio (VP/VS) has little effect on the estimation of the velocity. Applying this technique to a synthetic seismic data set confirms the theoretical findings. This work provides a practical method to obtain the velocity model for prestack Kirchhoff time migration. 相似文献
10.
We study the azimuthally dependent hyperbolic moveout approximation for small angles (or offsets) for quasi‐compressional, quasi‐shear, and converted waves in one‐dimensional multi‐layer orthorhombic media. The vertical orthorhombic axis is the same for all layers, but the azimuthal orientation of the horizontal orthorhombic axes at each layer may be different. By starting with the known equation for normal moveout velocity with respect to the surface‐offset azimuth and applying our derived relationship between the surface‐offset azimuth and phase‐velocity azimuth, we obtain the normal moveout velocity versus the phase‐velocity azimuth. As the surface offset/azimuth moveout dependence is required for analysing azimuthally dependent moveout parameters directly from time‐domain rich azimuth gathers, our phase angle/azimuth formulas are required for analysing azimuthally dependent residual moveout along the migrated local‐angle‐domain common image gathers. The angle and azimuth parameters of the local‐angle‐domain gathers represent the opening angle between the incidence and reflection slowness vectors and the azimuth of the phase velocity ψphs at the image points in the specular direction. Our derivation of the effective velocity parameters for a multi‐layer structure is based on the fact that, for a one‐dimensional model assumption, the horizontal slowness and the azimuth of the phase velocity ψphs remain constant along the entire ray (wave) path. We introduce a special set of auxiliary parameters that allow us to establish equivalent effective model parameters in a simple summation manner. We then transform this set of parameters into three widely used effective parameters: fast and slow normal moveout velocities and azimuth of the slow one. For completeness, we show that these three effective normal moveout velocity parameters can be equivalently obtained in both surface‐offset azimuth and phase‐velocity azimuth domains. 相似文献
11.
Image gathers as a function of subsurface offset are an important tool for the inference of rock properties and velocity analysis in areas of complex geology. Traditionally, these gathers are thought of as multidimensional correlations of the source and receiver wavefields. The bottleneck in computing these gathers lies in the fact that one needs to store, compute, and correlate these wavefields for all shots in order to obtain the desired image gathers. Therefore, the image gathers are typically only computed for a limited number of subsurface points and for a limited range of subsurface offsets, which may cause problems in complex geological areas with large geologic dips. We overcome increasing computational and storage costs of extended image volumes by introducing a formulation that avoids explicit storage and removes the customary and expensive loop over shots found in conventional extended imaging. As a result, we end up with a matrix–vector formulation from which different image gathers can be formed and with which amplitude‐versus‐angle and wave‐equation migration velocity analysis can be performed without requiring prior information on the geologic dips. Aside from demonstrating the formation of two‐way extended image gathers for different purposes and at greatly reduced costs, we also present a new approach to conduct automatic wave‐equation‐based migration‐velocity analysis. Instead of focusing in particular offset directions and preselected subsets of subsurface points, our method focuses every subsurface point for all subsurface offset directions using a randomized probing technique. As a consequence, we obtain good velocity models at low cost for complex models without the need to provide information on the geologic dips. 相似文献
12.
Stacking velocity V C2, vertical velocity ratio γ 0, effective velocity ratio γ eff, and anisotropic parameter χ eff are correlated in the PS-converted-wave (PS-wave) anisotropic prestack Kirchhoff time migration (PKTM) velocity model and are thus difficult to independently determine. We extended the simplified two-parameter (stacking velocity V C2 and anisotropic parameter k eff) moveout equation from stacking velocity analysis to PKTM velocity model updating and formed a new four-parameter (stacking velocity V C2, vertical velocity ratio γ 0, effective velocity ratio γ eff, and anisotropic parameter k eff) PS-wave anisotropic PKTM velocity model updating and process flow based on the simplified two-parameter moveout equation. In the proposed method, first, the PS-wave two-parameter stacking velocity is analyzed to obtain the anisotropic PKTM initial velocity and anisotropic parameters; then, the velocity and anisotropic parameters are corrected by analyzing the residual moveout on common imaging point gathers after prestack time migration. The vertical velocity ratio γ 0 of the prestack time migration velocity model is obtained with an appropriate method utilizing the P- and PS-wave stacked sections after level calibration. The initial effective velocity ratio γ eff is calculated using the Thomsen (1999) equation in combination with the P-wave velocity analysis; ultimately, the final velocity model of the effective velocity ratio γ eff is obtained by percentage scanning migration. This method simplifies the PS-wave parameter estimation in high-quality imaging, reduces the uncertainty of multiparameter estimations, and obtains good imaging results in practice. 相似文献
13.
方位角度域共成像点道集能够客观反映地下介质的速度、各向异性参数异常以及振幅随角度变化（AVA）和裂缝信息。传统Kirchhoff PSTM通常输出偏移距域共成像点道集,对于速度分析、各向异性分析、AVA分析、裂缝识别等均存在诸多不便。本文提出了基于走时梯度的Kirchhoff叠前时间偏移全方位角度集输出方法并提出工业上切实可行的实现方案。通过走时场梯度计算波场传播方向矢量,形成能够反映观测系统参数和波场传播情况的全方位角度域共成像点道集。为了在大规模地震数据Kirchhoff积分叠前时间偏移中输出全方位角度道集,本文给出基于输入道方式的偏移实现方法,采用逐条inline线进行线偏移成像,从而大大降低了全方位角度道集输出对计算机内存的压力,显著提高了Kirchhoff积分时间偏移输出全方位角度道集的可行性。三维盐丘模型测试和海上某区块三维实际资料试验证明了本文方法的正确性。 相似文献
14.
In recent years, wave‐equation imaged data are often presented in common‐image angle‐domain gathers as a decomposition in the scattering angle at the reflector, which provide a natural access to analysing migration velocities and amplitudes. In the case of anisotropic media, the importance of angle gathers is enhanced by the need to properly estimate multiple anisotropic parameters for a proper representation of the medium. We extract angle gathers for each downward‐continuation step from converting offset‐frequency planes into angle‐frequency planes simultaneously with applying the imaging condition in a transversely isotropic with a vertical symmetry axis (VTI) medium. The analytic equations, though cumbersome, are exact within the framework of the acoustic approximation. They are also easily programmable and show that angle gather mapping in the case of anisotropic media differs from its isotropic counterpart, with the difference depending mainly on the strength of anisotropy. Synthetic examples demonstrate the importance of including anisotropy in the angle gather generation as mapping of the energy is negatively altered otherwise. In the case of a titled axis of symmetry (TTI), the same VTI formulation is applicable but requires a rotation of the wavenumbers. 相似文献
15.
Moshe Reshef 《Geophysical Prospecting》2014,62(6):1453-1467
We present an innovative approach for seismic image enhancement using multi‐parameter angle‐domain characterization of common image gathers. A special subsurface angle‐domain imaging system is used to generate the multi‐parameter common image gathers in a summation‐free image space. The imaged data associated with each common image gathers depth point contain direction‐dependent opening‐angle image contributions from all the available incident and scattered wave‐pairs at this point. Each direction‐dependent opening‐angle data can be differently weighted according to its coherency measure. Once the optimal migration velocity is used, it is assumed that in the actual specular direction, the coherency measure (semblance) along reflection events, from all available opening angles and opening azimuths, is larger than that along non‐specular directions. The computed direction‐dependent semblance attribute is designed to operate as an imaging filter which enhances specular migration contributions and suppresses all others in the final migration image. The ability to analyse the structural properties of the image points by the multi‐parameter common image gather allows us to better handle cases of complicated wave propagation and to improve the image quality at poorly illuminated regions or near complex structures. The proposed method and some of its practical benefits are demonstrated through detailed analysis of synthetic and real data examples. 相似文献
16.
Investigating a time‐shift extended imaging condition in a Kirchhoff pre‐stack depth migration algorithm 
下载免费PDF全文
下载免费PDF全文 Gareth Shane O'Brien Sean Joseph Delaney Michael Igoe John Doherty Andrew Colhoun 《Geophysical Prospecting》2018,66(4):688-706
Extracting true amplitude versus angle common image gathers is one of the key objectives in seismic processing and imaging. This is achievable to different degrees using different migration techniques (e.g., Kirchhoff, wavefield extrapolation, and reverse time migration techniques) and is a common tool in exploration, but the costs can vary depending on the selected migration algorithm and the desired accuracy. Here, we investigate the possibility of combining the local‐shift imaging condition, specifically the time‐shift extended imaging condition, for angle gathers with a Kirchhoff migration. The aims are not to replace the more accurate full‐wavefield migration but to offer a cheaper alternative where ray‐based methods are applicable and to use Kirchhoff time‐lag common image gathers to help bridge the gap between the traditional offset common image gathers and reverse time migration angle gathers; finally, given the higher level of summation inside the extended imaging migration, we wish to understand the impact on the amplitude versus angle response. The implementation of the time‐shift imaging condition along with the computational cost is discussed, and results of four different datasets are presented. The four example datasets, two synthetic, one land acquisition, and a marine dataset, have been migrated using a Kirchhoff offset method, a Kirchhoff time‐shift method, and, for comparison, a reverse time migration algorithm. The results show that the time‐shift imaging condition at zero time lag is equivalent to the full offset stack as expected. The output gathers are cleaner and more consistent in the time‐lag‐derived angle gathers, but the conversion from time lag to angle can be considered a post‐processing step. The main difference arises in the amplitude versus offset/angle distribution where the responses are different and dramatically so for the land data. The results from the synthetics and real data show that a Kirchhoff migration with an extended imaging condition is capable of generating subsurface angle gathers. The same disadvantages with a ray‐based approach will apply using the extended imaging condition relative to a wave equation angle gather solution. Nevertheless, using this approach allows one to explore the relationship between the velocity model and focusing of the reflected energy, to use the Radon transformation to remove noise and multiples, and to generate consistent products from a ray‐based migration and a full‐wave equation migration, which can then be interchanged depending on the process under study. 相似文献
17.
We develop a new time‐domain reverse‐time migration method called double plane‐wave reverse‐time migration that uses plane‐wave transformed gathers. Original shot gathers with appropriate data acquisition geometry are double slant stacked into the double plane‐wave domain with minimal slant stacking artefacts. The range of plane‐wave components needed for migration can be determined by estimating the maximum time dips present in shot gathers. This reduces the total number of input traces for migration and increases migration efficiency. Unlike the pre‐stack shot‐profile reverse‐time migration where the number of forward propagations is proportional to the number of shots, the number of forward propagations needed for the proposed method remains constant and is relatively small even for large seismic datasets. Therefore, the proposed method can improve the efficiency of the migration and be suitable for migrating large datasets. Double plane‐wave reverse‐time migration can be performed for selected plane‐wave components to obtain subsurface interfaces with different dips, which makes the migration method target oriented. This feature also makes the method a useful tool for migration velocity analysis. For example, we are able to promptly obtain trial images with nearly horizontal interfaces and adjust velocity models according to common image gathers. Seismic signal coming from steeply dipping interfaces can be included into the migration to build images with more detailed structures and higher spatial resolution as better velocity models become available. Illumination compensation imaging conditions for the proposed method are also introduced to obtain images with balanced amplitudes. 相似文献
18.
R.-G. Ferber 《Geophysical Prospecting》1994,42(2):99-112
The stacking velocity best characterizes the normal moveout curves in a common-mid-point gather, while the migration velocity characterizes the diffraction curves in a zero-offset section as well as in a common-midpoint gather. For horizontally layered media, the two velocity types coincide due to the conformance of the normal and the image ray. In the case of dipping subsurface structures, stacking velocities depend on the dip of the reflector and relate to normal rays, but with a dip-dependent lateral smear of the reflection point. After dip-moveout correction, the stacking velocities are reduced while the reflection-point smear vanishes, focusing the rays on the common reflection points. For homogeneous media the dip-moveout correction is independent of the actual velocity and can be applied as a dip-moveout correction to multiple offset before velocity analysis. Migration to multiple offset is a prestack, time-migration technique, which presents data sets which mimic high-fold, bin-centre adjusted, common-midpoint gathers. This method is independent of velocity and can migrate any 2D or 3D data set with arbitrary acquisition geometry. The gathers generated can be analysed for normal-moveout velocities using traditional methods such as the interpretation of multivelocity-function stacks. These stacks, however, are equivalent to multi-velocity-function time migrations and the derived velocities are migration velocities. 相似文献
19.
Reverse‐time migration has become an industry standard for imaging in complex geological areas. We present an approach for increasing its imaging resolution by employing time‐shift gathers. The method consists of two steps: (i) migrating seismic data with the extended imaging condition to get time‐shift gathers and (ii) accumulating the information from time‐shift gathers after they are transformed to zero‐lag time‐shift by a post‐stack depth migration on a finer grid. The final image is generated on a grid, which is denser than that of the original image, thus improving the resolution of the migrated images. Our method is based on the observation that non‐zero‐lag time‐shift images recorded on the regular computing grid contain the information of zero‐lag time‐shift image on a denser grid, and such information can be continued to zero‐lag time‐shift and refocused at the correct locations on the denser grid. The extra computational cost of the proposed method amounts to the computational cost of zero‐offset migration and is almost negligible compared with the cost of pre‐stack shot‐record reverse‐time migration. Numerical tests on synthetic models demonstrate that the method can effectively improve reverse‐time migration resolution. It can also be regarded as an approach to improve the efficiency of reverse‐time migration by performing wavefield extrapolation on a coarse grid and by generating the final image on the desired fine grid. 相似文献
20.
We have developed a practical approach for updating the velocity of PS converted waves based on the inverse normal‐moveout common‐image‐point gather obtained from prestack Kirchhoff time migration. We have integrated all the steps involved in updating the migration velocity model into an interactive tool and have applied this approach to a real seismic data set from the Alba Field in the North Sea. Based on experience in handling the real data, we discuss various practical aspects of updating the velocity model, including: what kind of initial velocity model should be used; which parameters in the velocity model should be updated; and how to update them. Application of prestack Kirchhoff time migration to the data set using the updated velocity model produces an improved image of the Alba Field. 相似文献