首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 810 毫秒
1.
新型坐底式海洋可控源电磁发射系统及其海试应用   总被引:2,自引:1,他引:1       下载免费PDF全文
利用拖曳式海洋可控源电磁发射系统在探测埋藏较浅的天然气水合物资源时,会遇到一些新问题.如拖曳式轴向发射偶极源不能贴紧海底,发射偶极源和海底间海水的电磁衰减,使得10 Hz以上的相对高频能量难以导入至海底以下介质;发射偶极源有可能出现水平或垂向摆动;拖曳式发射时,时间窗口内叠加的数据有限;拖曳路线可能与海底构造走向平行,不利于揭示探测目标体的异常形态.新型坐底式发射系统有望解决上述问题.坐底式发射系统的硬件部分包括甲板端供电和监控单元、长距离电力和数据通信单元,以及水下发射机主体.新型坐底式发射系统的发射电极紧贴海底,没有海水层衰减,有利于相对高频的人工源电磁信号经过海底以下介质传输至接收端;通过超短基线信标更容易精确定位发射机拖体,利用姿态方位参考系统确定发射电极的供电方向,可以精确校正电偶源水平偏角的影响;增加单点供电时间,提高接收信号信噪比;提供两对电偶极源,从两个相互垂直的方向对异常体进行人工源激发.2015年海洋试验的结果表明,坐底式与拖曳式发射系统联合作业,可从多角度对海底异常体进行宽频带电磁激发,为数据采集提供丰富的场源信息.  相似文献   

2.
勘查天然气水合物资源的海洋可控源电磁发射系统   总被引:8,自引:7,他引:1       下载免费PDF全文
海洋可控源电磁探测(MCSEM)是勘查天然气水合物资源的有效方法之一.海洋可控源电磁发射系统是实现MCSEM的重要硬件组成部分.本文以天然气水合物在海底的一维地电模型为例,研究电偶源发射频率、发射偶极侧向漂移、源偶极矩大小对电场响应的影响,进而指导发射系统研制.该系统包括:甲板升压控制单元,可将船载大功率电能升为高压并通过万米光电复合缆输送至海底的发射机;水下变压器,可将深拖缆中的大功率高压转换为低压;拖曳式大功率电磁发射机,其内部的控制电路硬件和嵌入式驱动软件可将水下变压器输出的电能逆变为大功率矩形脉冲,并通过发射偶极将脉冲发送至海水介质中;借助水动力学设计的发射机拖体,用于装载发射系统水下部件和保持拖曳过程中的平衡与稳定;甲板端上位机监控单元,利用万米光电复合缆中的光纤实现船上计算机与海底发射机的远程数据通信.2012年5月和2013年5月海洋试验的结果均表明,所研制的发射系统可作为天然气水合物资源勘探的有效激励场源.  相似文献   

3.
We compare selected marine electromagnetic methods for sensitivity to the presence of relatively thin resistive targets (e.g., hydrocarbons, gas hydrates, fresh groundwater, etc.). The study includes the conventional controlled‐source electromagnetic method, the recently introduced transient electromagnetic prospecting with vertical electric lines method, and the novel marine circular electric dipole method, which is still in the stage of theoretical development. The comparison is based on general physical considerations, analytical (mainly asymptotic) analysis, and rigorous one‐dimensional and multidimensional forward modelling. It is shown that transient electromagnetic prospecting with vertical electric lines and marine circular electric dipole methods represent an alternative to the conventional controlled‐source electromagnetic method at shallow sea, where the latter becomes less efficient due to the air‐wave phenomenon. Since both former methods are essentially short‐offset time‐domain techniques, they exhibit a much better lateral resolution than the controlled‐source electromagnetic method in both shallow sea and deep sea. The greatest shortcoming of the transient electromagnetic prospecting with vertical electric lines and marine circular electric dipole methods comes from the difficulties in accurately assembling the transmitter antenna within the marine environment. This makes these methods significantly less practical than the controlled‐source electromagnetic method. Consequently, the controlled‐source electromagnetic method remains the leading marine electromagnetic technique in the exploration of large resistive targets in deep sea. However, exploring laterally small targets in deep sea and both small and large targets in shallow sea might require the use of the less practical transient electromagnetic prospecting with vertical electric lines and/or marine circular electric dipole method as a desirable alternative to the controlled‐source electromagnetic method.  相似文献   

4.
The theory behind transient electromagnetic surveys can be well described in terms of transverse magnetic and transverse electric modes. Soundings using transverse magnetic and transverse electric modes require different source configurations. In this study, we consider an alternating transverse magnetic field excitation by a circular electric dipole. The circular electric dipole transmitter is a horizontal analogue of the vertical electric dipole. Offshore surveys using circular electric dipole might represent an alternative to the conventional marine controlled‐source electromagnetic method at shallow sea and/or for exploring relatively small targets. Field acquisition is carried out by recording either electric or magnetic responses. Electric responses bear information on the 1D structure of a layered earth and successfully resolve high‐resistivity targets in marine surveys. Land‐based circular electric dipole soundings are affected by induced polarisation. On the contrary, magnetic responses are absent on the surface of a 1D earth, and as a result, they are very sensitive to any and even very small 3D conductivity perturbations. In addition, they are sensitive to induced polarisation or some other polarisation effects in the subsurface. At present, circular electric dipole transmitters and magnetic receivers are successfully used in on‐land mineral and petroleum exploration.  相似文献   

5.
Navigating marine electromagnetic transmitters using dipole field geometry   总被引:3,自引:0,他引:3  
The marine controlled source electromagnetic (CSEM) technique has been adopted by the hydrocarbon industry to characterize the resistivity of targets identified from seismic data prior to drilling. Over the years, marine controlled source electromagnetic has matured to the point that four‐dimensional or time lapse surveys and monitoring could be applied to hydrocarbon reservoirs in production, or to monitor the sequestration of carbon dioxide. Marine controlled source electromagnetic surveys have also been used to target shallow resistors such as gas hydrates. These novel uses of the technique require very well constrained transmitter and receiver geometry in order to make meaningful and accurate geologic interpretations of the data. Current navigation in marine controlled source electromagnetic surveys utilize a long base line, or a short base line, acoustic navigation system to locate the transmitter and seafloor receivers. If these systems fail, then rudimentary navigation is possible by assuming the transmitter follows in the ship's track. However, these navigational assumptions are insufficient to capture the detailed orientation and position of the transmitter required for both shallow targets and repeat surveys. In circumstances when acoustic navigation systems fail we propose the use of an inversion algorithm that solves for transmitter geometry. This algorithm utilizes the transmitter's electromagnetic dipole radiation pattern as recorded by stationary, close range (<1000 m), receivers in order to model the geometry of the transmitter. We test the code with a synthetic model and validate it with data from a well navigated controlled source electromagnetic survey over the Scarborough gas field in Australia.  相似文献   

6.
海底油气藏及天然气水合物的时频电磁辨识   总被引:2,自引:0,他引:2       下载免费PDF全文
提出了伪随机多频海洋电磁法观测方案.采用伪随机多频信号作为激励场源,多偏移距同线偶极-偶极同时观测,相关辨识海底地电系统的频率特性和冲激响应,可以在时间域和频率域同时辨识海底高阻薄层.在时间域,瞬变冲激时刻可以直接指示海底地层电导率的变化;在频率域,利用多个频率的电场响应计算的频散率及其道闻变化量,相对相位道间变化量对高阻薄层有很好的反映.从而实现对海底油气及天然气水合物的多参数辨识.  相似文献   

7.
Gas hydrates are a potential energy resource, a possible factor in climate change and an exploration geohazard. The University of Toronto has deployed a permanent seafloor time‐domain controlled source electromagnetic (CSEM) system offshore Vancouver Island, within the framework of the NEPTUNE Canada underwater cabled observatory. Hydrates are known to be present in the area and due to their electrically resistive nature can be monitored by 5 permanent electric field receivers. However, two cased boreholes may be drilled near the CSEM site in the near future. To understand any potential distortions of the electric fields due to the metal, we model the marine electromagnetic response of a conductive steel borehole casing. First, we consider the commonly used canonical model consisting of a 100 Ωm, 100 m thick resistive hydrocarbon layer embedded at a depth of 1000 m in a 1 Ωm conductive host medium, with the addition of a typical steel production casing extending from the seafloor to the resistive zone. Results show that in both the frequency and time domains the distortion produced by the casing occurs at smaller transmitter‐receiver offsets than the offsets required to detect the resistive layer. Second, we consider the experimentally determined model of the offshore Vancouver Island hydrate zone, consisting of a 5.5 Ωm, 36 m thick hydrate layer overlying a 0.7 Ωm sedimentary half‐space, with the addition of two borehole casings extending 300 m into the seafloor. In this case, results show that the distortion produced by casings located within a 100 m safety zone of the CSEM system will be measured at 4 of the 5 receivers. We conclude that the boreholes must be positioned at least 200 m away from the CSEM array so as to minimize the effects of the casings.  相似文献   

8.
We developed a new marine controlled‐source electromagnetic receiver for detecting methane hydrate zones and oil and gas reservoirs on the seafloor, which is not imaged well by seismic reflection surveys. To determine the seafloor structure, the electromagnetic receiver should have low noise, power consumption, clock drift error, and operating costs while being highly reliable. Because no suitable receiver was available in our laboratory, we developed a new marine controlled‐source electromagnetic receiver with these characteristics; the receiver is equipped with acoustic telemetry modem and an arm‐folding mechanism to facilitate deployment and recovering operations. To demonstrate the applicability of our new receiver, we carried out a field experiment offshore of Guangzhou in the South China Sea, where methane hydrates have been discovered. We successfully obtained controlled‐source electromagnetic data along a profile about 13 km long. All six new receivers were recovered, and high‐quality electromagnetic data were obtained. Relatively high apparent resistivity values were detected. The results of the offshore field experiment support the claim that the electromagnetic data obtained using the new receiver are of sufficient quality for the survey target.  相似文献   

9.
海洋拖曳式水平电偶源数值模拟与电场接收机研制   总被引:6,自引:6,他引:0       下载免费PDF全文
海洋天然气水合物资源调查中,电磁法已成为地震勘探最有效的补充手段之一,而我国海洋水合物电磁探测中的拖曳式电场接收机此前是空白.本文从方法原理、仪器设备和海洋试验等方面,对海洋拖曳式水平电偶极-偶极方法进行研讨.建立三维电阻率模型,进行数值模拟,讨论收发距、发射频率、拖曳装置离海底高度等参数与电场异常响应的关系,针对特定模型给出了最佳观测参数以指导仪器硬件设计与海洋测试.在此基础上,采用高级嵌入式计算机的智能化控制、前端低噪声斩波放大、高精度同步采集等技术,研制了由拖体、承压舱、采集电路、低噪声电场传感器等组成的海洋拖曳式水平轴向电场接收机,其系统噪声达到2 nV/√HZ @(1~100Hz).将自主研制的电场接收机用于国内首次拖曳式电偶极-偶极方法的海洋试验与评估,并对海试资料进行了处理与分析.研究结果表明,所研发的仪器达到了设计指标,能够用于海洋天然气水合物调查.  相似文献   

10.
Time‐domain marine controlled source electromagnetic methods have been used successfully for the detection of resistive targets such as hydrocarbons, gas hydrate, or marine groundwater aquifers. As the application of time‐domain marine controlled source electromagnetic methods increases, surveys in areas with a strong seabed topography are inevitable. In these cases, an important question is whether bathymetry information should be included in the interpretation of the measured electromagnetic field or not. Since multi‐dimensional inversion is still not common in time‐domain marine controlled source electromagnetic methods, bathymetry effects on the 1D inversion of single‐offset and multi‐offset joint inversions of time‐domain controlled source electromagnetic methods data are investigated. We firstly used an adaptive finite element algorithm to calculate the time‐domain controlled source electromagnetic methods responses of 2D resistivity models with seafloor topography. Then, 1D inversions are applied on the synthetic data derived from marine resistivity models, including the topography in order to study the possible topography effects on the 1D interpretation. To evaluate the effects of topography with various steepness, the slope angle of the seabed topography is varied in the synthetic modelling studies for deep water (air interaction is absent or very weak) and shallow water (air interaction is dominant), respectively. Several different patterns of measuring configurations are considered, such as the systems adopting nodal receivers and the bottom‐towed system. According to the modelling results for deep water when air interaction is absent, the 2D topography can distort the measured electric field. The distortion of the data increases gradually with the enlarging of the topography's slope angle. In our test, depending on the configuration, the seabed topography does not affect the 1D interpretation significantly if the slope angle is less or around 10°. However, if the slope angle increases to 30° or more, it is possible that significant artificial layers occur in inversion results and lead to a wrong interpretation. In a shallow water environment with seabed topography, where the air interaction dominates, it is possible to uncover the true subsurface resistivity structure if the water depth for the 1D inversion is properly chosen. In our synthetic modelling, this scheme can always present a satisfactory data fit in the 1D inversion if only one offset is used in the inversion process. However, the determination of the optimal water depth for a multi‐offset joint inversion is challenging due to the various air interaction for different offsets.  相似文献   

11.
We study a new marine electromagnetic configuration that consists of a ship‐towed inductive source transmitter and a series of remote electric dipole receivers placed on the seafloor. The approach was tested at the Palinuro Seamount in the southern Tyrrhenian Sea, at a site where massive sulphide mineralization has been previously identified by shallow drilling. A 3D model of the Palinuro study area was created using bathymetry data, and forward modelling of the electric field diffusion was carried out using a finite volume method. These numerical results suggest that the remote receivers can theoretically detect a block of shallowly buried conductive material at up to ~100 m away when the transmitter is located directly above the target. We also compared the sensitivity of the method using either a horizontal loop transmitter or a vertical loop transmitter and found that when either transmitter is located directly above the mineralized zone, the vertical loop transmitter has sensitivity to the target at a farther distance than the horizontal loop transmitter in the broadside direction by a few tens of metres. Furthermore, the vertical loop transmitter is more effective at distinguishing the seafloor conductivity structure when the vertical separation between transmitter and receiver is large due to the bathymetry. As a horizontal transmitter is logistically easier to deploy, we conducted a first test of the method with a horizontal transmitter. Apparent conductivities are calculated from the electric field transients recorded at the remote receivers. The analysis indicates higher apparent seafloor conductivities when the transmitter is located near the mineralized zone. Forward modelling suggests that the best match to the apparent conductivity data is obtained when the mineralized zone is extended southward by 40 m beyond the zone of previous drilling. Our results demonstrate that the method adds value to the exploration and characterization of seafloor massive sulphide deposits.  相似文献   

12.
This paper presents the first controlled‐source electromagnetic survey carried out in the German North Sea with a recently developed seafloor‐towed electrical dipole–dipole system, i.e., HYDRA II. Controlled‐source electromagnetic data are measured, processed, and inverted in the time domain to estimate an electrical resistivity model of the sub‐seafloor. The controlled‐source electromagnetic survey targeted a shallow, phase‐reversed, seismic reflector, which potentially indicates free gas. To compare the resistivity model to reflection seismic data and draw a combined interpretation, we apply a trans‐dimensional Bayesian inversion that estimates model parameters and uncertainties, and samples probabilistically over the number of layers of the resistivity model. The controlled‐source electromagnetic data errors show time‐varying correlations, and we therefore apply a non‐Toeplitz data covariance matrix in the inversion that is estimated from residual analysis. The geological interpretation drawn from controlled‐source electromagnetic inversion results and borehole and reflection seismic data yield resistivities of ~1 Ωm at the seafloor, which are typical for fine‐grained marine deposits, whereas resistivities below ~20 mbsf increase to 2–4 Ωm and can be related to a transition from fine‐grained (Holocene age) to unsorted, coarse‐grained, and compacted glacial sediments (Pleistocene age). Interface depths from controlled‐source electromagnetic inversion generally match the seismic reflector related to the contrast between the different depositional environments. Resistivities decrease again at greater depths to ~1 Ωm with a minimum resistivity at ~300 mbsf where a seismic reflector (that marks a major flooding surface of late Miocene age) correlates with an increased gamma‐ray count, indicating an increased amount of fine‐grained sediments. We suggest that the grain size may have a major impact on the electrical resistivity of the sediment with lower resistivities for fine‐grained sediments. Concerning the phase‐reversed seismic reflector that was targeted by the survey, controlled‐source electromagnetic inversion results yield no indication for free gas below it as resistivities are generally elevated above the reflector. We suggest that the elevated resistivities are caused by an overall decrease in porosity in the glacial sediments and that the seismic reflector could be caused by an impedance contrast at a thin low‐velocity layer. Controlled‐source electromagnetic interface depths near the reflector are quite uncertain and variable. We conclude that the seismic interface cannot be resolved with the controlled‐source electromagnetic data, but the thickness of the corresponding resistive layer follows the trend of the reflector that is inclined towards the west.  相似文献   

13.
海底可控源电磁接收机及其水合物勘查应用   总被引:2,自引:2,他引:0       下载免费PDF全文
海洋可控源电磁法在国外已成为海底天然气水合物调查的有效手段之一.为实现我国海域深水条件下水合物的海洋可控源电磁探测,本文从方法原理出发,采用低功耗嵌入式控制、前端低噪声斩波放大、高精度时间同步和水声通讯等技术,设计并开发了由承压舱、玻璃浮球、采集电路、电场与磁场传感器、姿态测量装置、声学释放器、USBL定位信标、测量臂、水泥块等部件组成的海底可控源电磁接收机,实现了海洋微弱电磁场信号的高精度采集.海底可控源电磁接收机具有高可靠性、低噪声、低功耗和低时漂的特点.利用研制的海底可控源电磁接收机,在琼东南海域进行水合物勘查,采集得到了可靠的人工源电磁场数据.通过数据处理及反演,获得了研究区海底的电阻率模型,结合地震资料,对高阻异常体进行推断解释,其结果为天然气水合物钻探井位布置提供了电性依据.  相似文献   

14.
MCSEM电磁场能流密度分布特征研究   总被引:1,自引:1,他引:0       下载免费PDF全文
采用海洋可控源电磁方法进行海底油气和水合物的勘查,需事先在海底布放接收机阵列,而后用一艘携带深拖缆的科考船将大功率电磁发射机牵引至海底,沿预设路线慢速走航,并将大功率电磁场导入海底.海底的人工电磁场中,空气波和直达波对提取勘探目标体的异常信息不做贡献.只有当折射波经过被测目标体时,产生电磁感应,海底的接收机对此感应信号进行数据采集,经数据处理,揭示被测目标体的几何大小和物理属性.异常体的有用信息与导入海底电磁场的能流密度(坡印廷矢量)有着密切的关系,以致于后者决定了前者的有效探测范围、有效带宽以及尽可能达到的最佳测量精度.能流密度在海底的分布情况十分复杂,但在均匀全空间中可较清楚地认识其分布特征,可为复杂地质条件的情况作理论铺垫.以此推广,在水平层状介质的地电条件下,建立能流密度的数理模型,利用海洋生产作业中的典型物性与几何参数,对海底以下有覆盖层的高阻体(可模拟油气或天然气水合物)进行正演,建立电磁场能流密度分布特征与数据采集技术的有机联系,为海洋可控源电磁发射机和接收机的优化改进提供理论依据.  相似文献   

15.
Marine electromagnetic induction studies   总被引:2,自引:0,他引:2  
In reviewing seafloor induction studies conducted over the last seven years, we observe a decline in single-station magnetotelluric (MT) experiments in favour of large, multinational, array experiments with a strong oceanographic component. However, better instrumentation, processing techniques and interpretational tools are improving the quality of MT experiments in spite of the physical limitations of the band limited seafloor environment, and oceanographic array deployments are allowing geomagnetic depth sounding studies to be conducted. Oceanographic objectives are met by the sensitivity of the horizontal electric field to vertically averaged motional currents, providing the same information, at much greater reliability and much lower cost, as an array of continuously operating current meter moorings.The seafloor controlled source method has now become, if not routine, at least viable. Prior to 1982, only one seafloor controlled source experiment has been conducted; now at least three groups are involved in the experimental aspects of this field. The horizontal dipole-dipole configuration is favoured, although a variant of the magnetometric resistivity method utilising a vertical electric transmitter has been developed and deployed. By exploiting the characteristics of the seafloor environment, source receiver spacings unimaginable on land can be achieved; on a recent deployment dipole spacings of 90 km were used with a clear 24 Hz signal transmitted through the seafloor. This, and prior experiments, show that the oceanic upper mantle is characteristically very resistive, 105 m at least. This resistive zone is becoming apparent from other experiments as well, such as studies of the MT response in coastal areas on land.Mid-ocean ridge environments are likely to be the target of many future electromagnetic studies. By taking available laboratory data on mineral, melt and water conductivity we predict to first order the kinds of structures the EM method will help us explore.  相似文献   

16.
南海琼东南盆地是天然气水合物重要远景区之一.由于盆地大部分地区海底地形平缓、地层近于水平,增加了利用地震反射剖面识别似海底反射(BSR,bottom simulating reflector)的难度,从而影响了对水合物的评价.为了进一步开展琼东南盆地水合物调查研究,本文在研究海域进行了海洋可控源电磁探测试验,将自主研发的10台接收机以500 m的间距,投放至水深约为1360 m的海底,完成了一条4.5 km剖面的电磁数据采集.通过对采集的数据进行处理与二维(2D)反演,获得了研究剖面海底的电阻率断面图.反演结果显示,研究区海底60~330 mbsf(meter bottom of seafloor)的地层中,存在多个横向不连续分布的高阻异常体,电阻率介于2~10 Ωm之间;在海底330 mbsf之下,横向上发育了电阻率为2~4 Ωm的3个高阻体.根据研究区热力学条件,本文估算了生物成因气与热成因天然气的水合物稳定带(GHSZ,gas hydrate stability zone)厚度,结合高阻体的分布特征推断了地震剖面上BSR的位置.在此基础上,对反演的电阻率断面进行解释,推断了研究区水合物的分布及游离气运移通道.研究表明,勘探区具有形成天然气水合物矿藏的地质与地球物理条件,其成藏模式可能属于"断层、裂隙输导的下生上储型",水合物的气源为生物成因气.  相似文献   

17.
海底油气藏地质模型的冲激响应   总被引:7,自引:5,他引:2       下载免费PDF全文
海洋可控源电磁法(mCSEM)的时间域冲激响应特征可以反映海底油气高阻薄层.本文计算了水平电偶极子源均匀大地半空间,海洋均匀双半空间和海洋四层模型的阶跃响应和冲激响应,提出了瞬变冲激时刻的概念.分析了水平电偶源瞬变冲激时刻与介质电导率的指示关系.对于海底油气高阻薄层宜采用多偏移距同时测量方式,由于在低电导率介质中电磁能量传播得要快,在适当的收发距瞬变冲激时刻会提前到达,提出的瞬变冲激时刻道间变化量可以明确指示高阻薄层的存在及埋深.文中还分析了海水深度对瞬变冲激时刻的影响.由于“天波”干扰,瞬变冲激响应受到一定收发距观测的限制.消除 “天波”影响是时间域和频率域mCSEM数据处理的研究热点.  相似文献   

18.
海洋可控源电磁法发射源姿态影响研究   总被引:5,自引:4,他引:1       下载免费PDF全文
海洋电磁理论是建立在水平发射偶极的基础上.然而,由于海底洋流作用海洋可控源发射偶极可能产生水平摆动、倾斜和水平旋转,造成测量数据与理想状态的水平电偶极子的电磁响应有较大的偏差.为了研究发射源姿态变化对场的影响,本文提出利用欧拉旋转将发射偶极由源坐标系转换到地球坐标系,进而分析发射源姿态变化造成海洋电磁观测数据的误差分布...  相似文献   

19.
海底电性源频率域CSEM勘探建模及水深影响分析   总被引:4,自引:3,他引:1       下载免费PDF全文
为了探索我国海域油气和水合物等高阻目标体CSEM勘探的可行性和方法技术,本文研究了在海水中水平电性源激励下有限水深海洋地电模型的频率域电磁响应,为进一步的1D和3D仿真计算奠定了理论基础.在推导电磁响应公式时,首先给出了各层介质的Lorentz势,然后根据Coulomb势与Lorentz势的关系,得到了各层介质的Coulomb势.各层介质中的电磁场均可以由Lorentz势或者Coulomb势计算得到,但在有限元计算时Coulomb势具有优势.长导线源的电磁场和势函数可以由电偶源的电磁场和势函数沿导线长度积分得到.文中具体给出了海水中水平电偶源和长导线源在海水层的电磁场公式,并根据该公式计算了不同水深环境下海底表面的电磁场分布,分析了海水深度对海底油气储层电磁异常的影响.结果表明,随着水深减小,异常幅度和形态特征发生明显变化.当水深很浅时(如50 m),只有同线方向的Ex和Ez两个电场分量存在明显异常.最后,以两个已知海底油田为例,计算了不同水深环境下可观测到的电场异常,展示了电性源频率域CSEM在海底勘探中(包括浅海环境)的良好应用前景.对于该方法实用化过程中还需进一步解决的问题,文中结尾部分也进行了初步探讨.  相似文献   

20.
李刚  李予国  韩波  段双敏 《地球物理学报》2017,60(12):4887-4900
在海洋可控源电磁法勘探中,接收站常置于海底.在进行海洋电磁场模拟时,由于海水和海底介质存在显著电性差异,这给海底接收点处场值的求取带来困难.本文提出一种新的接收点插值算法,该算法考虑到海底电场法向分量不连续性问题,用法向电流分量进行插值以准确求取海底任意接收点处电磁场值.本文利用交错网格有限差分法实现了二维介质中频率域海洋可控源法(CSEM)正演.对构造走向做傅里叶变换,将三维电磁模拟问题转换为波数域2.5维问题,即三维场源激励下针对二维地电模型的电磁模拟问题.使用交错网格有限差分法,基于一次场/二次场分离方法导出波数域二次电场离散形式,并进一步求得波数域电磁场.采用本文提出的改进的插值算法可求得海底任意接收点处波数域电磁场,采用傅里叶逆变换对波数域电磁场进行积分可得到接收点处空间域电磁场.模型算例表明,与常规的线性插值和严格插值算法相比,本文提出的改进的插值算法具有更高的精度.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号