共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
The strain space multiple mechanism model idealizes the behavior of granular materials on the basis of a multitude of virtual simple shear mechanisms oriented in arbitrary directions. Within this modeling framework, the virtual simple shear stress is defined as a quantity dependent on the contact distribution function as well as the normal and tangential components of interparticle contact forces, which evolve independently during the loading process. In other terms, the virtual simple shear stress is an intermediate quantity in the upscaling process from the microscopic level (characterized by contact distribution and interparticle contact forces) to the macroscopic stress. The stress space fabric produces macroscopic stress through the tensorial average. Thus, the stress space fabric characterizes the fundamental and higher modes of anisotropy induced in granular materials. Herein, the induced fabric is associated with monotonic and cyclic loadings, loading with the rotation of the principal stress, and general loading. Upon loading with the rotation of the principal stress axis, some of the virtual simple shear mechanisms undergo loading whereas others undergo unloading. This process of fabric evolution is the primary cause of noncoaxiality between the axes of principal stresses and strains. Although cyclic behavior and behavior under the rotation of the principal stress axis seem to originate from two distinct mechanisms, the strain space multiple mechanism model demonstrates that these behaviors are closely related through the hysteretic damping factor. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
3.
The strain space multiple mechanism model idealizes the behavior of granular materials based on a multitude of virtual simple shear mechanisms oriented in arbitrary directions. Within this modeling framework, the virtual simple shear stress is defined as a quantity that depends on the contact distribution function as well as the normal and tangential components of inter‐particle contact forces, which evolve independently during the loading process. In other terms, the virtual simple shear stress is an intermediate quantity in the upscaling process from the microscopic level (characterized by the contact distribution and inter‐particle contact forces). The stress space fabric (i.e. the orientation distribution of the virtual simple shear stress) produces macroscopic stress through the tensorial average. Thus, the stress space fabric characterizes the fundamental and higher modes of anisotropy induced in granular materials. Comparing an induced fabric associated with the biaxial shear of plane granular assemblies obtained via a simulation using Discrete Element Method to the strain space multiple mechanism model suggests that the strain space multiple mechanism model has the capability to capture the essential features in the evolution of an induced fabric in granular materials. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
4.
On the capillary stress tensor in wet granular materials 总被引：3，自引：0，他引：3
This paper presents a micromechanical study of unsaturated granular media in the pendular regime, based on numerical experiments using the discrete element method, compared with a microstructural elastoplastic model. Water effects are taken into account by adding capillary menisci at contacts and their consequences in terms of force and water volume are studied. Simulations of triaxial compression tests are used to investigate both macro and micro‐effects of a partial saturation. The results provided by the two methods appear to be in good agreement, reproducing the major trends of a partially saturated granular assembly, such as the increase in the shear strength and the hardening with suction. Moreover, a capillary stress tensor is exhibited from capillary forces by using homogenization techniques. Both macroscopic and microscopic considerations emphasize an induced anisotropy of the capillary stress tensor in relation with the pore fluid distribution inside the material. Insofar as the tensorial nature of this fluid fabric implies shear effects on the solid phase associated with suction, a comparison has been made with the standard equivalent pore pressure assumption. It is shown that water effects induce microstructural phenomena that cannot be considered at the macro level, particularly when dealing with material history. Thus, the study points out that unsaturated soil stress definitions should include, besides the macroscopic stresses such as the total stress, the microscopic interparticle stresses such as the ones resulting from capillary forces, in order to interpret more precisely the implications of the pore fluid on the mechanical behaviour of granular materials. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
5.
We present a micro‐mechanical analysis of macroscopic peak strength, critical state, and residual strength in two‐dimensional non‐cohesive granular media. Typical continuum constitutive quantities such as frictional strength and dilation angle are explicitly related to their corresponding grain‐scale counterparts (e.g., inter‐particle contact forces, fabric, particle displacements, and velocities), providing an across‐the‐scale basis for a better understanding and modeling of granular materials. These multi‐scale relations are derived in three steps. First, explicit relations between macroscopic stress and strain rate with the corresponding grain‐scale mechanics are established. Second, these relations are used in conjunction with the non‐associative Mohr–Coulomb criterion to explicitly connect internal friction and dilation angles to the micro‐mechanics. Third, the mentioned explicit connections are applied to investigate, understand, and derive micro‐mechanical conditions for peak strength, critical state, and residual strength. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
6.
In this paper we introduce the branch tensor as an internal variable able to account for the structural anisotropy of a granular sample. The distribution of averaged contact forces is assumed to depend not only on the macroscopic stress and the local orientation, but also on the value of the fabric tensor. In contrast to previous work, including the fabric tensor has the crucial advantage that accounts for all relative positions between interacting particles, through the average value of the branch tensor. Based on a classical representation result, we propose an identification procedure that uses information obtained from both isotropic and anisotropic configurations. 相似文献
7.
Three-dimensional Discrete Element Method simulations have been performed to study the deformation of cross-anisotropic granular materials under principal stress rotation (PSR), for rotation planes oriented at different angles θ with respect to the bedding plane. The simulations have been conducted with a novel technique for applying specified stresses at three-dimensional boundaries. The results are qualitatively in agreement with experimental results from literature. Cumulative volume contraction is always observed under continuous PSR and increases with increasing θ. The dilatancy rate decreases with increasing number of PSR cycles, tending to zero. The noncoaxiality angle between the strain increment and the stress in the PSR plane increases with increasing number of cycles, reaching the same asymptotic value for samples of various densities and for various θ. Periodic oscillations of the dilatancy rate and noncoaxiality angle within each PSR cycle are observed with an increasing oscillation magnitude with increasing θ, due to the larger fabric anisotropy within the PSR plane. When θ = 30 or 60°, significant noncoaxial strain accumulation occurs in the plane perpendicular to the PSR plane due to the oblique angle between the PSR plane and the bedding plane, echoing the major principal fabric direction's being neither parallel nor perpendicular to the PSR plane. The macroscopic behavior of the samples is related to the microscopic parameters including coordination number and fabric anisotropy. With increasing number of cycles, the difference between normalized stress/strain/fabric increment tensors tends to become constant, with only a small lag between each pair, irrespective of θ. 相似文献
8.
The paper examines the mechanics and physics of granular material responses at the macroscopic and microscopic levels during both monotonic and cyclic loadings. A numerical analysis referring to a long retaining wall is conducted using a two-dimensional discrete element model representing a granular system with a free top surface. On one of the lateral boundaries referring to the retaining wall, both active and passive loadings were applied monotonically as well as cyclically. First, the development of sheared zones and classic failure wedges resulting from active and passive monotonic displacements are discussed with respect to Rankine’s and Roscoe’s solution angles. Then, a series of loading cycles were performed using slow small-amplitude displacements at different stress states chosen before the occurrence of failure along the passive monotonic stress response curve. Particular interest is focused on the ultimate asymptotic cyclic response of the granular system, the occurrence of a high-mobility (convective) zone and a detailed macroscopic and microscopic analysis. Finally, major kinematical features that are displayed during cyclic loading from different starting stresses to eventually reach the same asymptotic state were elucidated through particle vortex-like flux formations, including contact rotations. The change in material stiffness was also investigated based on the evolution of strong and weak contact networks, together with the analysis of fabric anisotropy within the entire domain, including the high-mobility zone considered separately.
相似文献9.
循环荷载下砂土液化特性颗粒流数值模拟 总被引：7，自引：2，他引：5
利用PFC2D常体积循环双轴试验条件,对砂土在不排水循环荷载作用下的液化特性进行了颗粒流数值模拟,数值模拟按等应力幅加荷方式进行。颗粒流数值模拟的优点在于得到试样液化宏观力学表现的同时,通过不同循环加荷时刻试样内细观组构参量（包括配位数、接触法向分布、粒间法向接触力、粒间切向接触力）的演化规律,分析砂土液化过程中细观组构变化与宏观力学响应之间的内在联系,从而可进一步探讨砂土液化的细观力学机制。数值模拟研究结果表明,砂土液化现象在宏观力学表现上反映为超静孔隙水压力的累积上升和平均有效主应力的不断减小,在细观组构上对应于配位数的累积损失和粒间接触力的不断减小。砂土液化细观机制分析表明,试样配位数的减少与循环加荷过程中组构各向异性滞后于应力各向异性有关。 相似文献
10.
The critical state is significant to the mechanical behaviors of granular materials and the foundation of the constitutive relations. Using the discrete element method (DEM), the mechanical behaviors of granular materials can be investigated on both the macroscopic and microscopic levels. A series of DEM simulations under true triaxial conditions have been performed to explore the critical state and dilatancy behavior of granular materials, which show the qualitatively similar macroscopic responses as the experimental results. The critical void ratio and stress ratio under different stress paths are presented. A unique critical state line (CSL) is shown to indicate that the intermediate principal stress ratio does not influence the CSL. Within the framework of the unique critical state, the stress–dilatancy relation of DEM simulations is found to fulfill the state-dependent dilatancy equations. As a microscopic parameter to evaluate the static determinacy of the granular system, the redundancy ratio is defined and investigated. The results show that the critical state is very close to the statically determinate state. Other particle-level indexes, including the distribution of the contact forces and the anisotropies, are carefully investigated to analyze the microstructural evolution and the underlying mechanism. The microscopic analysis shows that both the contact orientations and contact forces influence the mechanical behaviors of granular materials. 相似文献
11.
Vicksburg loess is characterized by preferred orientation of constituent grains, which on the average dip 4° toward the west (N 80–85°W). This investigation was undertaken to study, quantitatively, the relationship between natural fabric anisotropies of Vicksburg loess and the orientation of applied stress distribution Results of the study indicate the fabric anisotropies in Vicksburg loess are reflected by definite variation in triaxial shear strength of dry and moist specimens.
In two series of triaxial tests, ultimate strength of the loess is maximum where σ1 is perpendicular to grain orientation, and it is reduced where the principal stresses are 45° to the fabric plane. In this respect, Vicksburg loess may serve as a structural model for granular earth materials in illustrating the influence of fabric on ultimate strength. Moreover, the Mohr-Coulomb fracture line consists of two line segments, with an increase in slope at higher confining pressure. This characteristic suggests that poorly-cemented sands, or sandstones, and silts, or siltstones, may undergo two failures: one at small strains where cement bonds are disrupted and the other at larger strains where internal shearing resistance of granular components is exceeded. 相似文献
12.
13.
In the present work, a methodology for setting up virgin stress conditions in discrete element models is proposed. The developed algorithm is applicable to discrete or coupled discrete/continuum modeling of underground excavation employing the discrete element method (DEM). Since the DEM works with contact forces rather than stresses there is a need for the conversion of pre-excavation stresses to contact forces for the DEM model. Different possibilities of setting up virgin stress conditions in the DEM model are reviewed and critically assessed. Finally, a new method to obtain a discrete element model with contact forces equivalent to given macroscopic virgin stresses is proposed. The test examples presented show that good results may be obtained regardless of the shape of the DEM domain. 相似文献
14.
The stress–strain behavior of a granular material is dominated by its internal structure, which is related to the spatial connectivity of particles, and the force chain network. In this study, a series of discrete element simulations were carried out to investigate the evolution of internal structure and force chain networks in initially isotropic granular materials along various imposed stress paths. The fabric tensor of the strong sub-network, which is the bearing network toward loading, can be related to the applied stresses uniquely. The principal directions of fabric tensor of the strong sub-network coincide with those of stress tensor during the loading process in the Lode coordinate system. The fabric of the whole contact network in the pre- and post-peak deformation stages can be related to the applied stresses as \(q_{\phi } = B\left( {q/p} \right)^{z}\) (B and z are constants depending on loading condition, such as the stress paths and mean stress level) and \(\phi_{1} :\phi_{2} :\phi_{3} \approx \left( {\sigma_{1} } \right)^{0.4} :\left( {\sigma_{2} } \right)^{0.4} :\left( {\sigma_{3} } \right)^{0.4}\), respectively. At the critical stress state, the deviator of fabric tensor of the strong sub-network is much larger than that of the whole contact network. When plotted on the π-plane, the fabric state of the strong sub-network can be expressed as a Lade’s surface, while the fabric state of the whole network corresponds to an inverted Lade’s surface. 相似文献
15.
采用细观数值模拟方法研究散粒体的锚固效应,基于随机模拟技术生成三维多面体颗粒及其在空间中的分布,在随机散粒体不连续变形模型的基础上将砾石锚固试验进行数值实现,分析加锚散粒体材料的宏观与细观力学性能,研究加锚密度及其与颗粒粒径的关系对散粒体力学性质的影响,并探讨锚杆在散粒体材料中的作用机制。分别建立不同锚杆间距和不同颗粒粒径的数值试样,数值模拟结果表明：散粒体锚固数值试验能够较好地反映不同加锚散粒体结构的变形规律与锚固效应;散粒体材料的宏观特性与其细观组构的演化密切相关;锚杆加固散粒体的作用机制为加锚散粒体内形成压缩区,挤压加固作用提高了散粒体间的接触作用力,散粒体结构的整体性得到加强并能承受一定荷载;不考虑锚杆长度的情况下,当锚杆间距小于3倍的散粒体平均粒径时,锚杆能够有效地加固散粒体形成稳定结构。 相似文献
16.
This paper presents a fabric tensor-based bounding surface model accounting for anisotropic behaviour (e.g. the dependency of peak strength on loading direction and non-coaxial deformation) of granular materials. This model is developed based on a well-calibrated isotropic bounding surface model. The yield surface is modified by incorporating the back stress which is proportional to a contact normal-based fabric tensor for characterising fabric anisotropy. The evolution law of the fabric tensor, which is dependent on both rates of the stress ratio and the plastic strain, rules that the material fabric tends to align with the loading direction and evolves towards a unique critical state fabric tensor under monotonic shearing. The incorporation of the evolution law leads to a rotational hardening of the yield surface. The anisotropic critical state is assumed to be independent of the initial values of void ratio and fabric tensor. The critical state fabric tensor has the same intermediate stress ratio (i.e. b value) and principal directions as the critical state stress tensor. A non-associated flow rule in the deviatoric plane is adopted, which is able to predict the non-coaxial flow naturally. The stress–strain relation and fabric evolution of model predictions show a satisfactory agreement with DEM simulation results under monotonic shearing with different loading directions. The model is also validated by comparing with laboratory test results of Leighton Buzzard sand and Toyoura sand under various loading paths. The comparison results demonstrate encouraging applicability of the model for predicting the anisotropic behaviour of granular materials.
相似文献17.
The shear behavior at the interface between the soil and a structure is investigated at the macroscale and particle‐scale levels using a 3‐dimensional discrete element method (DEM). The macroscopic mechanical properties and microscopic quantities affected by the normalized interface roughness and the loading parameters are analyzed. The macro‐response shows that the shear strength of the interface increases as the normalized roughness of the interface increases, and stress softening and dilatancy of the soil material are observed in the tests that feature rough interfaces. The particle‐scale analysis illustrates that a localized band characterized by intense shear deformation emerges from the contact plane and gradually expands as shearing progresses before stabilizing at the residual stress state. The thickness of the localized band is affected by the normalized roughness of the interface and the normal stress, which ranges between 4 and 5 times that of the median grain diameter. A thicker localized band is formed when the soil has a rough shearing interface. After the localized band appears, the granular material structuralizes into 2 regions: the interface zone and the upper zone. The mechanical behavior in the interface zone is representative of the interface according to the local average stress analysis. Certain microscopic quantities in the interface zone are analyzed, including the coordination number and the material fabric. Shear at the interface creates an anisotropic material fabric and leads to the rotation of the major principal stress. 相似文献
18.
Rui Wang Pengcheng Fu Zhaoxia Tong Jian‐Min Zhang Yannis F. Dafalias 《国际地质力学数值与分析法杂志》2017,41(17):1758-1778
The strength anisotropy of granular materials deposited under gravity has mostly been attributed to elongated particles' tendency to align long axes along the bedding plane direction. However, recent experiments on near‐spherical glass beads, for which preferred particle alignment is inapplicable, have exhibited surprisingly strong strength anisotropy. This study tests the hypothesis that certain amount of fabric anisotropy caused by the anisotropic stress during deposition under gravity can be locked in a circular‐particle deposit. Such locked‐in fabric anisotropy can withstand isotropic consolidation and leads to significant strength anisotropy. 2D discrete element method simulations of direct shear tests on circular‐particle deposits are conducted in this study, allowing for the monitoring of both stress and fabric. Simulations on both monodispersed and polydispersed circular‐particle samples generated under downward gravitational acceleration exhibit clear anisotropy in shear strength, thereby proving the hypothesis. When using contact normal‐based and void‐based fabric tensors to quantify fabric anisotropy in the material, we find that the intensity of anisotropy is discernible but low prior to shearing and is dependent on the consolidation process and the dispersity of the sample. The fact that samples with very low anisotropy intensity measurements still exhibit fairly strong strength anisotropy suggests that current typical contact normal‐based and void‐based second‐order fabric tensor formulations may not be very effective in reflecting the anisotropic peak shear strength of granular materials. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
19.
The strength of granular materials during triaxial compression is investigated via a grain scale analysis in this paper. A 3D Discrete Element Method (DEM) program provides the triaxial strength data and helps to validate the micromechanical analysis. Some standard methods in statistics are employed first to quantitatively examine the assumptions made when deriving the stress-force-fabric (SFF) equation. After careful validation, a more concise format for the SFF equation is proposed for triaxial compressions. With this SFF equation, the strength is found to be jointly contributed by the magnitudes of the contact force anisotropy and fabric anisotropy. The influence of the initial void ratio, confining pressure and loading direction on the development of contact force anisotropy and fabric anisotropy is examined and presented. With similar techniques, the “force” term in the SFF equation is further decoupled, and an equation is obtained such that it explicitly links the contact force term with the friction coefficient between grains, a tensor defined as a statistic of the normal contact forces and a tensor defined as a statistic of the mobilisation status of contacts. Based on this equation, another equation regarding the stress ratio of granular assembly is obtained, and it clearly indicates two sources that contribute to the phenomenological friction nature of granular assembly. These two sources are caused by the contact force at the grain scale. The first is the anisotropy of the average normal contact forces, and the second is the mobilisation of contacts. 相似文献
20.
颗粒体系中的骨架及力链网络 总被引：4，自引：0，他引：4
颗粒物质是大量离散的固体颗粒相互作用而组成的复杂体系,具有非连续和接触耗散等基本特征,其物理机制研究是近20年科学前沿之一。砂土就是典型的颗粒物质,土体中的有效应力是作用在土体骨架上的平均应力,土体变形主要来源于骨架上的颗粒位置,但对土体骨架并没有一个清晰的物理描述。近期颗粒物质力学研究认为,体系中颗粒相互接触形成的网络结构是外荷载传递路径的物理基础,可能就是土力学所指的骨架。同时还发现,较大的力通常沿着准直线的路径传递,人们常把传递较大力、与该准直线路径对应的若干颗粒组成的链状结构,称为强力链;弱力链则传递较小力。力链结构及其演变规律的描述是颗粒物质研究的核心之一。以单轴侧限压缩数值模拟为例,对比说明了土体颗粒骨架与力链结构的关系,明确提出强力链网络决定颗粒体系的宏观力学行为。 相似文献