共查询到20条相似文献，搜索用时 468 毫秒
1.
The relation between morphological change and patterns of variation in bedload transport rate in braided streams was observed by repeated, daily topographic surveys over a 25 day study period in a 60 m reach of the proglacial Sunwapta River, Alberta, Canada. There are two major periods of morphological change, each lasting several days and each involving the complete destruction and reconstruction of bar complexes. Bar complex destruction was caused by redirection of the flow and by downstream extension of the confluence scour zone upstream. Reconstruction involved accretion of unit bars on bar head, flank and tail and in one case was initiated by disection of a large, lobate unit bar. High rates of sediment movement, measured from net scour and fill of the cross-sections, coincided with these morphological changes. Sediment was supplied from both bed and bank erosion, and patterns and distances of transfer were highly variable. Rates of transport estimated by matching upstream erosional volumes with downstream deposition were much greater than those estimated from either a step-length approach or a sediment budget. Measurements of scour and fill and observations of morphological change indicate that step lengths (virtual transport distances) were typically 40–100m during a diurnal discharge cycle. Shorter step lengths occurred when transfer was confined to a single anabranch and longer steps involved channel changes at the scale of the entire reach. Sediment budgeting was used to describe the spatial patterns of sediment transport associated with the morphological changes and to estimate minimum daily reach-averaged transport rates. Mean bedload transport rates correlate with discharge, but with considerable scatter. The largest deviations from the mean relation can be tied to phases of channel incision, bank erosion, scour hole migration, bar deposition and channel filling apparently controlled by changes and fluctuations in sediment supply from upstream, independent of discharge. These are interpreted as field evidence of ‘autopulses’ or ‘macropulses’ in bedload transport, previously observed only in laboratory models of braided streams. 相似文献
2.
Single‐thread, gravel‐bed streams of moderate slope in the northern Negev are characterized by three channel units: bars exhibit steeper than average slopes and poorly sorted mixtures of small–medium cobbles and coarse–very coarse pebbles; flats are associated with more gentle slopes and well‐sorted medium–fine pebbles and granules; and transitional units have intermediate slopes and grain size. In general, all three units are planar, span the full channel width and have well‐defined boundaries. Bars and flats are more common than the transitional units and alternate downstream for distances of several hundred metres, forming sequences that are reminiscent of the riffle–pool structure commonly observed in humid‐temperate gravel‐bed rivers. A notable contrast is the absence of significant bed relief: bars lack crests and flats lack depressions. The relative lack of bed relief in bar–flat sequences is attributed to the high rate of sediment supply from the sparsely vegetated hillslopes which promotes the infilling of depressions and to the erosion of crests under conditions of intense transport. This reduction of bed relief lowers channel roughness, which in turn increases flow velocity and, therefore, the ability of the channel to transmit the large sediment loads it receives. Although our analyses pertain to a semi‐arid river system, the results have wider implications for understanding the adjustment of channel bedform to high sediment loads in other fluvial environments. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
3.
Alan Thompson 《地球表面变化过程与地形》1986,11(6):631-641
The major bedforms of gravel bed rivers, whether braided, meandering or straight, may be usefully resolved into pool-riffle units, each comprising a single scour pool together with an associated depositional shoal downstream. At low flow, the latter may be characterized by a single emergent bar-head and submerged riffle, or by a variety of remnant braid bars, depending upon the type of channel. Identification of pool-riffle units and observation of associated flow structures on a small meandering stream in northwest England has demonstrated important links between bedforms, flow patterns and channel change. Each unit appears to be associated with a systematic pattern of secondary flows, which are able to modify the bedforms and initiate meander development. Feedback links between plan morphology, flow patterns and erosive and depositional forces within these units ensure that each stage of meander growth has a characteristic style of channel change. Consequently, meanders tend to evolve by regular cycles of increasing curvature and complexity. 相似文献
4.
Compared to downstream fining of a gravel‐bedded river, little field evidence exists to support the process of downstream fining in large, fine sand‐bedded rivers. In fact, the typically unimodal bed sediments of these rivers are thought to produce equal mobility of coarse and fine grains that may discourage downstream fining. To investigate this topic, we drilled 200 sediment cores in the channel beds of two fine‐grained sand‐bedded reaches of the Yellow River (a desert reach and a lower reach) and identified a fine surface layer (FSL) developed over a coarse subsurface layer (CSL) in the 3‐m‐thick bed deposits. In both reaches downstream, the thickness of the FSL increased, while that of the CSL decreased. Comparison of the depth‐averaged median grain sizes of the CSL and the FSL separately in both reaches shows a distinct downstream fining dependence to the median grain size, which indicates that at a large scale of 600‐800 km, the CSL shows a significant downstream fining, but the FSL shows no significant trends in downstream variations in grain size. This result shows that fine sediment supply (<0·08 mm median grain size) from upstream, combined with lateral fine sediment inputs from tributaries and bank erosion, can cause a rapid fining of the downstream channel bed surface and can develop the FSL layer. However, in the desert reach, lateral coarse sediment supply (>0·08 mm median grain size) from wind‐borne sediments and cross‐desert tributaries can interrupt the FSL and coarsen the channel bed surface locally. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
5.
Sediment load plays a fundamental role in natural river morphology evolution. Therefore, the correct assessment of the role
of the sediment load on natural or anthropic pools morphology downstream of river grade control structures, such as rock chute
or block ramps, is of fundamental interest for preserving the fish habitat and the river morphology. This work presents an
experimental study on the sediment load influence on rectangular expanding pools downstream of block ramps in live-bed conditions.
Several longitudinal and transversal expanding ratios have been tested. Ramp slopes were varied between 0.083 and 0.25. The
effect of the pool geometry and the sediment load on hydraulic jump downstream of block ramp as well as scour morphologies
and flow patterns have been analyzed. Equations were derived to evaluate the maximum scour hole depth, the longitudinal distance
of the section in which it occurs, and the maximum water elevations both in the pool and in the downstream contraction. 相似文献
6.
The stability of the pool–rif?e sequence is one of the most fundamental features of alluvial streams. For several decades, the process of velocity, or shear stress, reversal has been proposed as an explanation for an increase in the amplitude of pool–rif?e sequence bars during high ?ows, offsetting gradual scour of rif?es and deposition in pools during low ?ows. Despite several attempts, reversal has rarely been recorded in ?eld measurements. We propose that, instead of being reversed, maxima and minima in shear stress are phase‐shifted with respect to the pool–rif?e sequence bedform pro?le, so that maximum shear stress occurs upstream of rif?e crests at high ?ow, and downstream at low ?ow. Such phase‐shifts produce gradients of shear stress that explain rif?e deposition, and pool scour, at high ?ow, in accord with sediment continuity. The proposal is supported by results of a one‐dimensional hydraulic model applied to the surveyed bathymetry of a pool–rif?e sequence in a straight reach of a gravel‐bed river. In the sequence studied, the upstream phase‐shift in shear stress at high ?ow was associated with variations in channel width, with width minima occurring upstream of rif?e crests, approximately coincident with shear stress maxima, and width maxima occurring downstream of rif?e crests. Assuming that the width variation is itself the result of ?ow de?ection by rif?e crests at low ?ow, and associated bank‐toe scour downstream, low and high ?ow can be seen to have complementary roles in maintaining alluvial pool–rif?e sequences. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
7.
8.
Gravel-bed rivers characteristically exhibit shallow riffles in wide sections and deeper pools where the channel becomes constricted and narrow. While rivers can adjust to changing flow and sediment supply through some combination of adjustments of channel slope, bed-surface sorting, and channel shape, the degree to which riffle-pools may adopt these changes in response to changing flows and sediment supplies remains unclear. This article presents results from a flume experiment investigating how constant- and variable-width channels adjust their morphology in response to changing flow and increased sediment supply. Two flume geometries were used: (1) constant-width and (2) variable-width, characterized by a sinusoidal pattern with a mean width equal to that of the first channel. The variable-width channel developed bed undulations in phase with the width, representing riffle-pools. The experiment consisted of three phases for each flume geometry: (1) steady flow, constant sediment supply; (2) unsteady flow, constant sediment supply; and (3) unsteady flow, doubled sediment supply. Unsteady flow was implemented in the form of repeated symmetrical stepped hydrographs, with a mean discharge equal to that in the steady flow phase. In all phases the bed and sediment supply were composed of a sand/gravel mixture ranging from 1 to 8 mm. In both the straight and variable-width channels, transitioning from steady flow to repeated hydrographs did not result in significant changes in bed morphology. The two channel geometries had different responses to increased sediment supply: the slope of the straight channel increased nearly 40%, while the variable-width channel reduced the relief between bars and pools and decreased the variability in cross-sectional elevation with a slight slope increase. Bar-pool relief varied with repeat discharge hydrographs. Pool elevation changed twice the distance of bar elevations, emphasizing the relevance of pool scour for riffle-pool self-maintenance in channels with width variations. 相似文献
9.
The changing form of developing alluvial river bars has rarely been studied in the field, especially in the context of the fixed, compound, mainly alternate gravel bars that are the major morphological feature of the wandering style. Century scale patterns of three‐dimensional growth and development, and the consequent scaling relations of such bars, are examined along the gravel‐bed reach of lower Fraser River, British Columbia, Canada. A retrospective view based on maps and aerial photographs obtained through the twentieth century shows that individual bars have a life history of about 100 years, except in certain, protected positions. A newly formed gravel bar quickly assumes its ultimate thickness and relatively quickly approaches its equilibrium length. Growth continues mainly by lateral accretion of unit bars, consistent with the lateral style of instability of the river. Bar growth is therefore allometric. Mature bars approach equilibrium dimensions and volume that scale with the overall size of the channel. Accordingly, the bars conform with several published criteria for the ultimate dimensions of alternate barforms. Sand bars, observed farther downstream, have notably different morphology. Fraser River presents a typical wandering channel planform, exhibiting elements of both meandered and low‐order braided channels. Hydraulic criteria to which the Fraser bars conform illustrate why this planform develops and persists. The modest rate of bed material transfer along the channel – typical of the wandering type – determines a century‐length time scale for bar development. This time scale is consistent with estimates that have been made for change of the macroform elements that determine the overall geometry of alluvial channels. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
10.
We explore the link between channel‐bed texture and river basin concavity in equilibrium catchments using a numerical landscape evolution model. Theory from homogeneous sediment transport predicts that river basin concavity directly increases with bed sediment size. If the effective grain size on a river bed governs its concavity, then natural phenomena such as grain‐size sorting and channel armouring should be linked to concavity. We examine this hypothesis by allowing the bed sediment texture to evolve in a transport‐limited regime using a two grain‐size mixture of sand and gravel. Downstream ?ning through selective particle erosion is produced in equilibrium. As the channel‐bed texture adjusts downstream so does the local slope. Our model predicts that it is not the texture of the original sediment mixture that governs basin concavity. Rather, concavity is linked to the texture of the sorted surface layer. Two different textural regimes are produced in the experiments: a transitional regime where the mobility of sand and gravel changes with channel‐bed texture, and a sand‐dominated region where the mobility of sand and gravel is constant. The concavity of these regions varies depending on the median gravel‐ or sand‐grain size, erosion rate, and precipitation rate. The results highlight the importance of adjustments in both surface texture and slope in natural rivers in response to changes in ?uvial and sediment inputs throughout a drainage network. This adjustment can only be captured numerically using multiple grain sizes or empirical downstream ?ning rules. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
11.
Morphodynamics in sand‐bed braided rivers are associated with simultaneous evolution of mid‐channel bars and channels on the braidplain. Bifurcations around mid‐channel bars are key elements that divide discharge and sediment. This, in turn, may control the evolution of connected branches, with effects propagating to both upstream and downstream bifurcations. Recent works on bifurcation stability and development hypothesize major roles of secondary flow and gradient advantage. However, this has not been tested for channel networks within a fully developed dynamic braided river. A reason for this is a lack of detailed measurements with sufficient temporal and spatial length, covering multiple bifurcations. Therefore we used a physics‐based numerical model to generate a dataset of bathymetry, flow and sediment transport of an 80 km river reach with self‐formed braid bars and bifurcations. The study shows that bar dissection due to local transverse water surface gradients is the dominant bifurcation initiation mechanism, although conversion of unit bars into compound bars dominates in the initial stage of a braided river. Several bifurcation closure mechanisms are equally important. Furthermore, the study showed that nodal point relations for bifurcations are unable to predict short‐term bifurcation evolution in a braided river. This is explained by occurrence of nonlinear processes and non‐uniformity within the branches, in particular migrating bars and larger‐scale backwater‐effects, which are not included in the nodal point relations. Planform morphology, on the other hand, has predictive capacity: bifurcation angle asymmetry and bar‐tail limb shape are indicators for near‐future bifurcation evolution. Remote sensing data has predictive value, for which we developed a conceptual model for interactions between bars, bifurcations and channels in the network. We conducted a preliminary test of the conceptual model on satellite images of the Brahmaputra. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
12.
13.
N. P. Wallerstein 《地球表面变化过程与地形》2003,28(1):49-68
Large woody debris (LWD) can have a significant impact upon local channel morphology by creating scour pools and zones of reduced shear stress in which sediment is deposited. It is important to predict scour depths associated with LWD, as it is becoming increasingly common for debris to be added into river channels to improve sediment retention and create pools for aquatic habitat. Engineered log‐jams should therefore be designed using factor of safety engineering analysis, which includes estimates of associated scour and deposition rates. However, the rate and total depth of scour associated with LWD have not been modelled comprehensively, with authors resorting to the use of generic local and constriction scour models to predict scour depths. Also, constriction scour models presented, to date, do not calculate the rate of scour development. In this paper a model is presented for predicting the rate and total depth of scour associated with a channel constriction. The model is one‐dimensional and is based upon the sediment continuity equation, the calculation of specific head changes through the constricted reach and also allows for a variable free surface elevation above the bed at the constriction. This model could be applied to any channel constriction problem but here is used to determine scour rates and depths associated with deflector‐type LWD jams. Deflector jams are one category of jam type presented in a debris jam classification scheme, in which jam type is a function of the ratio of average riparian tree height to average channel width. Deflector jams, as the name implies, partially block the flow and therefore act as a channel constriction, which results in constriction scour. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
14.
《国际泥沙研究》2000,(4)
1 INTRODUCTIONThe exact mechanism of accumulation of sediments in point bars is not clearly known. Many scientistsinvestigated the problem. In the river Klaralven, Sundborg (1956) observed the development of sometransverse bars in the initial stage of the point bar formation. These transverse bars tend to becomelongitudinal as they extend close to the stream bed. Martvall and Nilsson (1972) investigated the problemof point bar formation experimentally in a laboratory flume. The flume st… 相似文献
15.
We describe additions made to a multi‐size sediment routing model enabling it to simulate width adjustment simultaneously alongside bed aggradation/incision and fining/coarsening. The model is intended for use in single thread gravel‐bed rivers over annual to decadal timescales and for reach lengths of 1–10 km. It uses a split‐channel approach with separate calculations of flow and sediment transport in the left and right sides of the channel. Bank erosion is treated as a function of excess shear stress with bank accretion occurring when shear stress falls below a second, low, threshold. A curvature function redistributes shear stress to either side of the channel. We illustrate the model through applications to a 5·6‐km reach of the upper River Wharfe in northern England. The sediment routing component with default parameter values gives excellent agreement with field data on downstream fining and down‐reach reduction in bedload flux, and the width‐adjustment components with approximate calibration to match maximum observed rates of bank shifting give plausible patterns of local change. The approach may be useful for exploring interactions between sediment delivery, river management and channel change in upland settings. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
16.
Alternate bars were formed by sediment transport in a flume with Froude-modelled flow and relative roughness characteristic of gravel-boulder channels with steep slopes. The flume (0.3 m wide × 7.5 m long) was filled with a sand-gravel mixture, which was also fed into the top of the flume at a constant rate under constant discharge. Channel slope was set at 0.03. Initially, coarse particles accumulated on incipient bar heads near one side of the flume and diverted flow and bedload transport across the flume toward a pool scoured against the opposite flume wall downstream. Sorting in the pool directed coarse particles onto the next bar head downstream. Alternate sequences of pools and coarse bar heads were thereby linked down the entire flume by interactions of sediment sorting, flow, and channel morphology. During episodes of bar construction, unsorted bedload invaded interior bar surfaces and was deposited. Persistent deposition of coarse particles on bar heads prevented downstream migration of bars by inhibiting bar-head erosion and bedload transport over bars. Likely factors leading to bar-head stabilization in modelled gravel-bed channels are coarse mixed-size sediment, steep channel gradients, and shallow depths. 相似文献
17.
An assessment of engineered log jam structures in response to a flood event in an upland gravel‐bed river 
下载免费PDF全文
下载免费PDF全文 Engineered log jams (ELJs) are employed to address river restoration goals and a range of river management problems including coarse sediment movement. In the Bowmont Water, a dynamic wandering gravel‐bed river in the Scottish Borders, 33 previously untested ELJs primarily designed to capture and store coarse sediment, were installed on a trial basis. Using repeated topographical surveys and field observations, the performance of the ELJs in response to a 5–10 year recurrence interval flood that occurred on the 25 September 2012 was evaluated at two reaches with catchment areas of 28 km2 and 57 km2. Three of the structures were damaged due to scour of surrounding material that exposed the pile anchors and all the timbers of one structure were completely displaced downstream. Sixteen structures induced geomorphic responses and only four induced significant deposition (>0.3 m) above that which would occur naturally within the adjacent active gravel bar deposition zones. The placement in gravel bars, minor channel blockage ratio created by the structures and their porous nature limited the hydraulic interference and in turn geomorphic responses. Therefore the ELJ placement goal of increasing sediment storage was not fully met. This study contributes to the empirical evidence base for ELJ performance evaluation of different designs in a range of physiographic settings needed to validate performance and refine design. Using these initial findings and knowledge gained from other studies, recommendations for improving the design and placement strategy are proposed. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
18.
Leif M. Burge 《地球表面变化过程与地形》2006,31(10):1211-1226
This study presents the first detailed field‐based analysis of the morphology of bifurcations within anabranching cobble–gravel rivers. Bifurcations divide the flow of water and sediment into downstream anabranches, thereby influencing the characteristics of the anabranches and the longevity of river islands. The history, morphology, bed grain size, and flow vectors at five bifurcations on the Renous River, New Brunswick, Canada, were studied in detail. The angles of bifurcations within five anabranching rivers in the Miramichi basin were investigated. The average bifurcation angle was 47°, within the range of values cited for braided river bifurcations. Bifurcation angle decreased when anabranches were of similar length. Shields stresses in channels upstream of bifurcations were lower than reported values for braided rivers. Stable bifurcations displayed lower Shields stresses than unstable bifurcations, contrary to experimental results from braided river bifurcations. Bifurcations in anabranching rivers are stabilized by vegetation that slows channel migration and helps to maintain a uniform upstream flow field. The morphology of stable bifurcations enhances their stability. A large bar, shaped like a shallow ramp that increases in elevation to floodplain level, forms at stable bifurcations. Floodplains at stable bifurcations accrete upstream at rates between 0·9 and 2·5 m a?1. Bars may also form within the entrance of an anabranch downstream of the bifurcation node. These bars are associated with bifurcation instability, forming after a period of stability or an avulsion. Channel abandonment occurs when a bar completely blocks the entrance to one anabranch. The stability of channels upstream of bifurcations and the location of bars at bifurcations influence bifurcation stability and the maintenance of river anabranching in the long term. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
19.
Channel response to an extreme flood and sediment pulse in a mixed bedrock and gravel‐bed river 下载免费PDF全文
下载免费PDF全文 We exploit a natural experiment caused by an extreme flood (~500 year recurrence interval) and sediment pulse derived from more than 2500 concurrent landslides to explore the influence of valley‐scale geomorphic controls on sediment slug evolution and the impact of sediment pulse passage and slug deposition and dispersion on channel stability and channel form. Sediment slug movement is a crucial process that shapes gravel‐bed rivers and alluvial valleys and is an important mechanism of downstream bed material transport. Further, increased bed material transport rates during slug deposition can trigger channel responses including increases in lateral mobility, channel width, and alluvial bar dominance. Pre‐ and post‐flood LiDAR and aerial photographs bracketing the 2007 flood on the Chehalis River in south‐western Washington State, USA, document the channel response with high spatial and temporal definition. The sediment slug behaved as a Gilbert Wave, with both channel aggradation and sequestration of large volumes of material in floodplains of headwaters' reaches and reaches where confined valleys enter into broad alluvial valleys. Differences between the valley form of two separate sub‐basins impacted by the pulse highlight the important role channel and channel‐floodplain connectivity play in governing downstream movement of sediment slug material. Finally, channel response to the extreme flood and sediment pulse illustrate the connection between bed material transport and channel form. Specifically, the channel widened, lateral channel mobility increased, and the proportion of the active channel covered by bars increased in all reaches in the study area. The response scaled tightly with the relative amount of bed material sediment transport through individual reaches, indicating that the amount of morphological change caused by the flood was conditioned by the simultaneous introduction of a sediment pulse to the channel network. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
20.
A field‐based project was initiated in order to characterize velocities and sediment entrainment in a forced‐pool and riffle sequence. Three‐dimensional velocities and turbulence intensities were measured with an acoustic Doppler velocimeter at 222 different points at three similar flows that averaged approximately 4·35 m3 s−1 within a large pool–riffle unit on North Saint Vrain Creek, Colorado. Sediment‐sorting patterns were observed with the introduction of 500 tracer particles painted according to initial seeding location. Tracer particles moved sporadically during a 113 day period in response to the annual snowmelt peak flow, which reached a maximum level of 14·8 m3 s−1. Velocity data indicate high instantaneous velocities and turbulence levels in the centre of pools. Patterns of sediment deposition support the notion that stream competence is higher in the pool than the downstream riffle. Flow convergence around a large channel constriction appears to play a major role in multiple processes that include helical flow development and sediment routing, and backwater development with low velocities and turbulence levels above the constriction that may locally limit sediment supply. Jet flow, flow separation, vortex scour and turbulence generation enhance scour in the centre of pools. Ultimately, multiple processes appear to play some role in maintenance of this forced pool and the associated riffle. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献