共查询到20条相似文献,搜索用时 31 毫秒
1.
Melonite group minerals and other tellurides are described from three Cu–Ni–PGE prospects in the Eastern Desert of Egypt: Gabbro Akarem, Genina Gharbia and Abu Swayel. The prospects are hosted in late Precambrian mafic–ultramafic rocks and have different geologic histories. The Gabbro Akarem prospect is hosted in dunite pipes where net-textured and massive sulfides are associated with spinel and Cr-magnetite. Michenerite, merenskyite, Pd–Bi melonite and hessite occur mainly as inclusions in sulfides. Typical magmatic textures indicate a limited role of late- and post-magmatic hydrothermal processes. At Genina Gharbia, ore forms either disseminations in peridotite or massive patches in hornblende-gabbro in the vicinity of metasedimentary rocks. Actinolitic hornblende, epidote, chlorite and quartz are common secondary silicates. Sulfide textures and host rock petrography suggest a prolonged late-magmatic hydrothermal event. Michenerite, merenskyite, Pd–Bi melonite, altaite, hessite, tsumoite, sylvanite and native Te are mainly present in secondary silicates. The Abu Swayel prospect occurs in conformable, lens-like mafic–ultramafic rocks in metasedimentary rocks and along syn-metamorphic shear zone. The sulfide ore and host rocks are metamorphosed (amphibolite facies; 550 to 650 °C, 4 to 5 kbar) and syn-metamorphically sheared. Melonite group minerals are represented by merenskyite and Pd–Bi melonite. Other tellurides comprise hessite, altaite and joséite-B. Melonite group minerals and tellurides occur as inclusions in mobilized sulfides and along cracks in metamorphic garnet and plagioclase.The different geological history of the three prospects permits an examination of the role played by magmatic, late-magmatic and metamorphic processes on the mineralogy of melonite group minerals and diversity of tellurides. The contents of PGE and Te in the ore and temperature of crystallization control the mineralogy and compositional trends of the melonite group minerals. Crystallization of the melonite group minerals over a wide range of temperatures in a Te-rich environment enhances the elemental substitutions. Merenskyite dominates the mineralogy of the group at low Te activity, while Pd–Bi melonite is the common phase at high Te activity. 相似文献
2.
The Ferguson Lake Ni–Cu–Co–platinum-group element (PGE) deposit in Nunavut, Canada, occurs near the structural hanging wall
of a metamorphosed gabbroic sill that is concordant with the enclosing country rock gneisses and amphibolites. Massive to
semi-massive sulfide occurs toward the structural hanging wall of the metagabbro, and a low-sulfide, high-PGE style of mineralization
(sulfide veins and disseminations) locally occurs ~30–50 m below the main massive sulfide. Water–rock interaction in the Ferguson
Lake Ni–Cu–Co–PGE deposit is manifested mostly as widespread, post-metamorphic, epidote–chlorite–calcite veins, and replacement
assemblages that contain variable amounts of sulfides and platinum-group minerals (PGM). PGM occur as inclusions in magmatic
pyrrhotite and chalcopyrite in both the massive sulfide and high-PGE zones, at the contact between sulfides and hornblende
or magnetite inclusions in the massive sulfide, in undeformed sulfide veins and adjacent chlorite and/or epidote halos, in
hornblende adjacent to hydrothermal veins, and in plagioclase–chlorite aggregates replacing garnet cemented by sulfide. The
PGM are mostly represented by the kotulskite (PdTe)–sobolevskite (PdBi) solid solution but also include michenerite (PdBiTe),
froodite (PdBi2), merenskyite (PdTe2), mertieite II (Pd8[Sb,As]3), and sperrylite (PtAs2) and occur in variety of textural settings. Those that occur in massive and interstitial sulfides, interpreted to be of magmatic
origin and formed through exsolution from base metal sulfides at temperatures <600°C, are dominantly Bi rich (i.e., Te-bearing
sobolevskite), whereas those that occur in late-stage hydrothermal sulfide/silicate veins and their epidote–chlorite alteration
halos tend to be more Te rich (i.e., Bi-bearing kotulskite). The chemistry and textural setting of the various PGM supports
a genetic model that links the magmatic and hydrothermal end-members of the sulfide–PGM mineralization. The association of
PGM with magmatic sulfides in the massive sulfide and high-PGE zones has been interpreted to indicate that PGE mineralization
was initially formed through exsolution from base metal sulfides which formed by magmatic sulfide liquid segregation and crystallization.
However, the occurrence of PGM in undeformed sulfide-bearing veins and in their chlorite–epidote halos and differences in
PGM chemistry indicate that hydrothermal fluids were responsible for post-metamorphic redistribution and dispersion of PGE. 相似文献
3.
The Kristineberg massive sulfide deposit is hosted by metamorphosed volcanic and subvolcanic rocks of the Palaeoproterozoic
Skellefte Group. The deposit consists of: (1) two main massive sulfide horizons, the A-ores and B-ores, which dip steeply
southwards and are separated by 100–150 m; and (2) the Einarsson Zone, a complex interval of Cu–Au-rich ‘stockwork‘ sulfides
and small massive sulfide lenses in altered and deformed rocks near the 1,000 m level. The Einarsson Zone occurs some 20–100 m
south of the B-ores. There are no definite younging indicators in the mine sequence. In many areas of the mine, the original
host rocks are impossible to identify petrographically due to the abundance of secondary minerals such as quartz, chlorite,
muscovite, cordierite, andalusite, phlogopite, pyrite and talc, combined with variably schistose fabrics. Application of immobile-element
methods to 600 recent whole-rock chemical analyses has, however, allowed the original rock types to be identified and correlated.
Rhyolite X lies immediately north of the A-ore, while andesitic to dacitic to rhyodacitic rocks make up the 100–150 m interval
between the A-ore and B-ore, and massive rhyolite A lies immediately south of the B-ore. The felsic rocks are mostly of calc-alkaline
affinity, excluding rhyolite X, which is transitional. The mine porphyry, which lies north of the A-ore and forms the marginal
phase of the synvolcanic Viterliden Intrusive Complex, is compositionally similar to dacite and rhyodacite. Mass changes calculated
for all rock types indicate that most of the volcanic rocks in the mine area are strongly depleted in Na and Ca, and have
gained variable amounts of Mg and Fe, whereas Si changes range from negative to positive. Gains in Fe and changes in Si are
largest within 5–10 m of the massive sulfide lenses. Cordierite-bearing schists of andesitic to felsic compositions that lie
between massive sulfide lenses A and B are not as altered. The Einarsson Zone commonly shows large gains in Fe and Mg, while
Si shows large gains to large losses. Immobile-element ratios indicate that very different secondary assemblages in the mine,
e.g. andalusite–quartz–muscovite and cordierite–chlorite–talc, can be produced from the same precursor volcanic unit, e.g.,
rhyolite. Conversely, the same secondary mineral assemblage can be produced from different rocks, e.g. weakly altered andesite
and strongly altered rhyolite. The common presence of cordierite + andalusite in the mine area, without anthophyllite, is
unusual in the alteration systems of volcanic-hosted massive sulfide deposits, and is proposed to have formed by the metamorphic
reaction of the synvolcanic alteration minerals kaolinite and chlorite to produce cordierite. Where kaolinite was in excess
of chlorite, andalusite was also formed. We propose that highly acidic alteration fluids locally produced high-Al minerals
such as kaolinite that either overprinted, or occurred in place of, a more typical sericite–chlorite–quartz alteration assemblage
that otherwise formed near the massive sulfide lenses. Application of lithogeochemical methods to the altered, deformed and
metamorphosed Kristineberg rocks has identified specific volcanic contacts with massive sulfide potential, and quantified
the effects of synvolcanic hydrothermal alteration. Such an approach can increase the effectiveness of mineral exploration
in metamorphosed terrains. 相似文献
4.
The Paleoproterozoic Ruttan Cu–Zn volcanogenic massive-sulfide (VMS) deposit is a large, relatively low grade, bimodal-siliciclastic
type deposit in the Rusty Lake volcanic belt of northern Manitoba. The deposit contained over 82.8 million tonnes of massive
sulfide, of which 55.7 million tonnes were mined from 1973 to 2002. The deposit consists of a series of moderately to steeply
dipping, south-facing lenses that extend along strike at the surface for 1.1 km and to a depth of 1.0 km. These lenses occur
within a steeply dipping, bimodal volcanic, volcaniclastic and siliciclastic sequence. In the immediate mine area, transitional
calc-alkalic to high-silica (tholeiitic), felsic, and intermediate volcanic/volcaniclastic rocks of the Mine Sequence are
host to, and intercalated with, the massive-sulfide lenses. Transitional tholeiitic to calc-alkalic basalt and andesite are
present in the footwall sequence, approximately 500 m down-section from the ore horizon. The overlying rocks are predominantly
fine-grained volcaniclastics and siliciclastics, but include polyfragmental agglomerate that contains mafic bombs and scoriaceous
felsic fragments. Syn-depositional felsic and mafic dikes, sills, and apophyses are ubiquitous throughout the Mine Sequence,
including the ore lenses, indicating continued, near-vent magmatism, and volcanism during ore formation. Fabrics in altered
hostrocks have consistent, down-plunge stretching lineations to the SSE that suggest the deposit has been elongated by a factor
of ~1.2–1.5; otherwise, the deposit is remarkably undeformed. Syn- and post-depositional faults in the mine area have relatively
minor displacements up to tens of meters. Proximal (within 200 m) footwall rocks exhibit moderate to strong chloritization,
characterized by the upper greenschist to lower amphibolite facies assemblages that include cordierite–almandine–andalusite–sillimanite–biotite ± staurolite ± anthophyllite ± talc,
and local silicification. The proximal hanging wall rocks are characterized by sericite ± gahnite alteration, which is restricted
to within approximately 75 m of the uppermost lenses. Additional gangue minerals are anhydrite and carbonate minerals (siderite,
dolomite, ankerite, and calcite), as well as chlorite, sericite, biotite, talc, and quartz. Carbonate (excluding siderite),
potassium feldspar, silicification and epidotization are common distal alteration zones in the footwall to the Mine Sequence
several kilometers to the northeast. There are three principal groups of massive sulfide lenses; the East lenses, the West
lenses, and the Western Anomaly lenses to the far west. In general, Cu is relatively enriched at the stratigraphic base and
in the center of the deposit, whereas Zn is enriched upsection and at the outer margins. Some of the Zn-rich ore exhibits
primary mineralogical layering. Parts of the West and Western Anomaly lenses show two layers with Cu-rich bases and Zn-rich
tops. The massive sulfide is typically 10–40-m thick; one area along the margin of the main lenses is over 130-m thick and
may represent deposition adjacent to a syn-depositional fault. The main sulfide phases are pyrite, pyrrhotite, chalcopyrite,
sphalerite, and galena, with tetrahedrite as the most abundant trace phase. Gahnite is ubiquitous in the chlorite-rich assemblages
adjacent to the ore lenses. The average base, precious and trace metal contents estimated from Cu and Zn concentrates, and
from millhead grades and recoveries. Metals easily transported as chloride and bisulfide complexes in hydrothermal fluids
including: Pb, Ag, In, Cu, Cd, Au, and Zn are enriched by 1.5–2.5 orders of magnitude in comparison to the bulk continental
crust. Other elements such as Sn, Mo, and As are at near-crustal concentrations, whereas Mn, Ga, and Co are significantly
depleted in comparison to the crust. Calculated metal concentrations in the average hydrothermal fluid based on the average
metal contents are comparable to, or higher than those measured at sediment covered ridge hydrothermal systems, which precipitate
much of their metal budget in the subsurface. Average rare earth element contents for the sulfide are light rare earth element
enriched (LaN/YbN=22) and range from 0.45 to 0.02x chondritic values, with a moderate negative Eu anomaly (Eu*=0.51). Metal and trace element
contents in the Ruttan exhalite horizon, and in proximal (within 1–2 km) exhalites along strike from the 0.6 million tonne
Dar-2 Cu–Zn deposit 12 km south of Ruttan, have positive Eu anomalies, whereas negative Eu anomalies are present at distance.
The positive Eu anomalies reflect high temperature paleoseafloor hydrothermal venting and precipitation of Eu2+-enriched clays and possibly carbonates, and indicate proximity to base-metal deposits. Silver and lead are also enriched
in the exhalites near the deposits, whereas Mn is enriched at ~1–3 km along strike, but not consistently.
Editorial handling: B. Gemmel
An erratum to this article is available at . 相似文献
5.
Hamdy A. El Desouky Philippe Muchez Adrian J. Boyce Jens Schneider Jacques L. H. Cailteux Stijn Dewaele Albrecht von Quadt 《Mineralium Deposita》2010,45(8):735-763
The sediment-hosted stratiform Cu–Co mineralization of the Luiswishi and Kamoto deposits in the Katangan Copperbelt is hosted
by the Neoproterozoic Mines Subgroup. Two main hypogene Cu–Co sulfide mineralization stages and associated gangue minerals
(dolomite and quartz) are distinguished. The first is an early diagenetic, typical stratiform mineralization with fine-grained
minerals, whereas the second is a multistage syn-orogenic stratiform to stratabound mineralization with coarse-grained minerals.
For both stages, the main hypogene Cu–Co sulfide minerals are chalcopyrite, bornite, carrollite, and chalcocite. These minerals
are in many places replaced by supergene sulfides (e.g., digenite and covellite), especially near the surface, and are completely
oxidized in the weathered superficial zone and in surface outcrops, with malachite, heterogenite, chrysocolla, and azurite
as the main oxidation products. The hypogene sulfides of the first Cu–Co stage display δ34S values (−10.3‰ to +3.1‰ Vienna Canyon Diablo Troilite (V-CDT)), which partly overlap with the δ34S signature of framboidal pyrites (−28.7‰ to 4.2‰ V-CDT) and have ∆34SSO4-Sulfides in the range of 14.4‰ to 27.8‰. This fractionation is consistent with bacterial sulfate reduction (BSR). The hypogene sulfides
of the second Cu–Co stage display δ34S signatures that are either similar (−13.1‰ to +5.2‰ V-CDT) to the δ34S values of the sulfides of the first Cu–Co stage or comparable (+18.6‰ to +21.0‰ V-CDT) to the δ34S of Neoproterozoic seawater. This indicates that the sulfides of the second stage obtained their sulfur by both remobilization
from early diagenetic sulfides and from thermochemical sulfate reduction (TSR). The carbon (−9.9‰ to −1.4‰ Vienna Pee Dee
Belemnite (V-PDB)) and oxygen (−14.3‰ to −7.7‰ V-PDB) isotope signatures of dolomites associated with the first Cu–Co stage
are in agreement with the interpretation that these dolomites are by-products of BSR. The carbon (−8.6‰ to +0.3‰ V-PDB) and
oxygen (−24.0‰ to −10.3‰ V-PDB) isotope signatures of dolomites associated with the second Cu–Co stage are mostly similar
to the δ13C (−7.1‰ to +1.3‰ V-PDB) and δ18O (−14.5‰ to −7.2‰ V-PDB) of the host rock and of the dolomites of the first Cu–Co stage. This indicates that the dolomites
of the second Cu–Co stage precipitated from a high-temperature, host rock-buffered fluid, possibly under the influence of
TSR. The dolomites associated with the first Cu–Co stage are characterized by significantly radiogenic Sr isotope signatures
(0.70987 to 0.73576) that show a good correspondence with the Sr isotope signatures of the granitic basement rocks at an age
of ca. 816 Ma. This indicates that the mineralizing fluid of the first Cu–Co stage has most likely leached radiogenic Sr and
Cu–Co metals by interaction with the underlying basement rocks and/or with arenitic sedimentary rocks derived from such a
basement. In contrast, the Sr isotope signatures (0.70883 to 0.71215) of the dolomites associated with the second stage show
a good correspondence with the 87Sr/86Sr ratios (0.70723 to 0.70927) of poorly mineralized/barren host rocks at ca. 590 Ma. This indicates that the fluid of the
second Cu–Co stage was likely a remobilizing fluid that significantly interacted with the country rocks and possibly did not
mobilize additional metals from the basement rocks. 相似文献
6.
Volcan Popocatépetl is a Quaternary stratovolcano located 60 km southeast of Mexico City. The summit crater is the site of
recent ash eruptions, excess degassing, and dacite dome growth. The modern cone comprises mainly pyroclastic flow deposits,
airfall tephras, debris flows, and reworked deposits of andesitic composition; it is flanked by more mafic monogenetic vents.
In least-degassed fallout tuffs and mafic scoria, transition metals are concentrated in phases formed before eruption, during
eruption, and after eruption. Preeruptive minerals occur in both lavas and tephra, and include oxides and sulfides in glass
and phenocrysts. The magmatic oxides consist of magnetite, ilmenite, and chromite; the sulfides consist of both (Fe,Ni)1-xS (MSS) and Cu–Fe sulfide (ISS). Syn- and posteruptive phases occur in vesicles in both lavas and tephra, and on surfaces
of ash and along fractures. The mineral assemblages in lavas include Cu–Fe sulfide and Fe–Ti oxide in vesicles, and Fe sulfide
and Cu–Fe sulfide in segregation vesicles. Assemblages in vesicles in scoria include Fe–Ti oxide and rare Fe–Cu–Sn sulfide.
Vesicle fillings of Fe–Ti oxide, Ni-rich chromite, Fe sulfide, Cu sulfide, and barite are common to two pumice samples. The
most coarse-grained of the vesicle fillings are Cu–Fe sulfide and Cu sulfide, which are as large as 50 μ in diameter. The
youngest Plinian pumice also contains Zn(Fe) sulfide, as well as rare Ag–Cu sulfide, Ag–Fe sulfide, Ag bromide, Ag chloride,
and Au–Cu telluride. The assemblage is similar to those typically observed in high-sulfidation epithermal mineralization.
The fine-grained nature and abundance of syn- and/or posteruptive phases in porous rocks makes metals susceptible to mobilization
by percolating fluids. The abundance of metal compounds in vesicles indicates that volatile exsolution prior to and/or during
eruption played an important role in releasing metals to the atmosphere.
Received: March 1997 · Accepted: 27 May 1997 相似文献
7.
I. V. Vikentyev 《Mineralogy and Petrology》2006,87(3-4):305-326
Summary The study focuses on the mode of occurrence of Au, Ag and Te in ores of the Gaisk, Safyanovsk, Uzelginsk and other volcanic-hosted
massive sulfide (VHMS) deposits in the Russian Urals. Minerals containing these elements routinely form fine inclusions within
common sulfides (pyrite, chalcopyrite and sphalerite). Gold is mostly concentrated as ‘invisible’ gold within pyrite and chalcopyrite
at concentrations of 1–20 ppm. Silver mainly occurs substituted in tennantite (0.1–6 wt.% Ag). In the early stages of mineralization,
gold is concentrated into solid solution within the sulfides and does not form discrete minerals. Mineral parageneses identified
in the VHMS deposits that contain discrete gold- and gold-bearing minerals, including native gold, other native elements,
various tellurides and tennantite, were formed only in the latest stages of mineralization. Secondary hydrothermal stages
and local metamorphism of sulfide ores resulted in redistribution of base and precious metals, refining of the common sulfides,
the appearance of submicroscopic and microscopic inclusions of Au–Ag alloys (fineness 0.440–0.975) and segregation of trace
elements into new, discrete minerals. The latter include Au and Ag compounds combined with Te, Se, Bi and S. Numerous tellurides
(altaite, hessite, stützite, petzite, krennerite etc.) are found in the massive sulfide ores of the Urals and appear to be
major carriers of gold and PGE in VHMS ores. 相似文献
8.
Characteristic Features of REE and Pb–Zn–Ag Mineralizations in the Na Son Deposit,Northeastern Vietnam
下载免费PDF全文
![点击此处可从《Resource Geology》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Can Pham‐Ngoc Daizo Ishiyama Tuan Anh Tran Mihoko Hoshino Sachihiro Taguchi 《Resource Geology》2016,66(4):404-418
The Na Son deposit is a small‐scale Pb–ZnPb–Zn–Ag deposit in northeast Vietnam and consists of biotite–chlorite schist, reddish altered rocks, quartz veins and syenite. The biotite–chlorite schist is intruded by syenite. Reddish altered rocks occur as an alteration halo between the biotite–allanite‐bearing quartz veins and the biotite–chlorite schist. Allanite occurs in the biotite–allanite‐bearing quartz veins and in the proximal reddish altered rocks. Rare earth element (REE) fluorocarbonate minerals occur along fractures or at rim of allanite crystals. The later horizontal aggregates of sulfide veins and veinlets cut the earlier reddish altered rocks. The earlier Pb–Zn veins consist of a large amount of galena and lesser amounts of sphalerite, pyrite and molybdenite. The later Cu veins cutting the Pb–Zn veins include chalcopyrite and lesser amounts of tetrahedrite and pyrite. The occurrences of two‐phase H2O–CO2 fluid inclusions in quartz from biotite–allanite‐bearing quartz veins and REE‐bearing fluorocarbonate minerals in allanite suggest the presence of CO2 and F in the hydrothermal fluid. The oxygen isotopic ratios of the reddish altered rocks, biotite–chlorite schist, and syenite range from +13.9 to +14.9 ‰, +11.5 to +13.3 ‰, and +10.1 to +11.6 ‰, respectively. Assuming an isotopic equilibrium between quartz (+14.6 to +15.8 ‰) and biotite (+8.6 ‰) in the biotite–allanite‐bearing quartz vein, formation temperature was estimated to be 400°C. At 400°C, δ18O values of the hydrothermal fluid in equilibrium with quartz and biotite range from +10.5 to +11.7 ‰. These δ18O values are consistent with fluid that is derived from metamorphism. Assuming an isotopic equilibrium between galena (+1.5 to +1.7 ‰) and chalcopyrite (+3.4 ‰), the formation temperature was estimated to be approximately 300°C. The formation temperature of the Na Son deposit decreased with the progress of mineralization. Based on the geological data, occurrence of REE‐bearing minerals and oxygen isotopic ratios, the REE mineralization is thought to result from interaction between biotite–chlorite schist and REE‐, CO2‐ and F‐bearing metamorphic fluid at 400°C under a rock‐dominant condition. 相似文献
9.
The Navachab gold deposit in the Damara belt of central Namibia is hosted by a near-vertical sequence of amphibolite facies
shelf-type metasediments, including marble, calc-silicate rock, and biotite schist. Petrologic and geochemical data were collected
in the ore, alteration halos, and the wall rock to evaluate transport of elements and interaction between the wall rock and
the mineralizing fluid. The semi-massive sulfide lenses and quartz–sulfide veins are characterized by a complex polymetallic
ore assemblage, comprising pyrrhotite, chalcopyrite, sphalerite, and arsenopyrite, native bismuth, gold, bismuthinite, and
bismuth tellurides. Mass balance calculations indicate the addition of up to several orders of magnitude of Au, Bi, As, Ag,
and Cu. The mineralized zones also record up to eightfold higher Mn and Fe concentrations. The semi-massive sulfide lenses
are situated in the banded calc-silicate rock. Petrologic and textural data indicate that they represent hydraulic breccias
that contain up to 50 vol.% ore minerals, and that are dominated by a high-temperature (T) alteration assemblage of garnet–clinopyroxene–K-feldspar–quartz.
The quartz–sulfide veins crosscut all lithological units. Their thickness and mineralogy is strongly controlled by the composition
and rheological behavior of the wall rocks. In the biotite schist and calc-silicate rock, they are up to several decimeters
thick and quartz-rich, whereas in the marble, the same veins are only a few millimeters thick and dominated by sulfides. The
associated alteration halos comprise (1) an actinolite–quartz alteration in the biotite schist, (2) a garnet–clinopyroxene–K-feldspar–quartz
alteration in the marble and calc-silicate rock, and (3) a garnet–biotite alteration that is recorded in all rock types except
the marble. The hydrothermal overprint was associated with large-scale carbonate dissolution and a dramatic increase in CO2 in the ore fluid. Decarbonation of wall rocks, as well as a low REE content of the ore fluid resulted in the mobilization
of the REE, and the decoupling of the LREE from the HREE. The alteration halos not only parallel the mineralized zones, but
may also follow up single layers away from the mineralization. Alteration is far more pronounced facing upward, indicating
that the rocks were steep when veining occurred. The petrologic and geochemical data indicate that the actinolite–quartz–
and garnet–clinopyroxene–K-feldspar–quartz alterations formed in equilibrium with a fluid (super-) saturated in Si, and were
mainly controlled by the composition of the wall rocks. In contrast, the garnet–biotite alteration formed by interaction with
a fluid undersaturated in Si, and was mainly controlled by the fluid composition. This points to major differences in fluid–rock
ratios and changes in fluid composition during alteration. The alteration systematics and geometry of the hydrothermal vein
system are consistent with cyclic fluctuations in fluid pressure during fault valve action.
Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. 相似文献
10.
Detailed geochemical and mineralogical investigation of four talc deposits in the Eastern Desert of Egypt (Atshan, Abu Gurdi, Darhib and Kashira) suggests that the deposits form a distinct lithological unit within the Shadli metavolcanic rocks. The talc crystallized from the replacement of siliceous carbonate beds locally intercalated with clastic sediments. Th/Yb vs. Ta/Yb ratios of the rocks suggest that the sediments and the host volcanic rocks formed in an active continental margin (ACM) environment. Thus, the talc deposits may represent relict fragments of an ancient, regionally extensive carbonate horizon within the arc-related metavolcanics. The talc-rich rocks, which contain relict carbonate, serpentinized olivine and tremolite, have low (<3 wt%) Al2O3, Cr, Ni (<20 ppm), Co and Sc (<15 ppm) concentrations, precluding mafic or felsic igneous protoliths. The deposits were locally affected by contact metamorphism, giving rise to pyroxene-hornfels and granulite facies assemblages, and by regional metamorphism which produced greenschist-amphibolite grade assemblages. Disseminated sulfides commonly occur in the talc-tremolite-rich rocks (having low Al2O3 concentrations), suggesting that the metals were probably present in the original carbonate beds, but were remobilized and reconcentrated during the various metamorphic events. 相似文献
11.
The Portneuf–Mauricie Domain (PMD), located in the south-central part of the Grenville province, contains Mesoproterozoic
Ni–Cu ± platinum-group element (PGE) prospects hosted in a variety of plutonic intrusions (layered, with simple structures,
or zoned) and emplaced in a mature island arc setting. A two-stage model is envisaged to explain the formation of magmatic
sulfides. An early loss of a small amount of sulfides in the conduits of primitive, hydrous mantle-derived melts under high
fO2, resulted in depletion of the magmas in chalcophile and precious metals (Cu/Pd ratios vary from initial mantle values up
to 1.6 × 106). Then, nearer the mineralized zones, the magmas interacted with sulfide-bearing country rocks, resulting in felsification
of the magmas, assimilation of crustal sulfur (δ
34S values up to +5.5‰), and the formation of an immiscible sulfide liquid. Liquid-sulfide formation was followed by variable
interactions between the silicate and sulfide magmas, which were responsible for the enrichment of sulfides in Ni, Cu, and,
locally, PGE. Indeed, low R factors are found for prospects hosted in intrusions with a simple internal structure and in layered intrusions whereas high
R factors are found for prospects hosted in zoned intrusions. Finally, sulfide melt may have been partly incorporated into
later pulses of magma and injected into shallow magma chambers to form the PMD prospects. The PMD prospects share common characteristics
with other well-known deposits (Aguablanca, Vammala, Stormyrplunen, and deposits in Alaskan/Ural-type intrusions), attesting
to the Ni, Cu, and PGE potential of deposits associated with subduction-zone settings. 相似文献
12.
13.
Elena D. Andreeva Hiroharu Matsueda Victor M. Okrugin Ryohei Takahashi Shuji Ono 《Resource Geology》2013,63(4):337-349
Mineralogic studies of major ore minerals and fluid inclusion analysis in gangue quartz were carried out for the for the two largest veins, the Aginskoe and Surprise, in the Late Miocene Aginskoe Au–Ag–Te deposit in central Kamchatka, Russia. The veins consist of quartz–adularia–calcite gangue, which are hosted by Late Miocene andesitic and basaltic rocks of the Alnei Formation. The major ore minerals in these veins are native gold, altaite, petzite, hessite, calaverite, sphalerite, and chalcopyrite. Minor and trace minerals are pyrite, galena, and acanthine. Primary gold occurs as free grains, inclusions in sulfides, and constituent in tellurides. Secondary gold is present in form of native mustard gold that usually occur in Fe‐hydroxides and accumulates on the decomposed primary Au‐bearing tellurides such as calaverite, krennerite, and sylvanite. K–Ar dating on vein adularia yielded age of mineralization 7.1–6.9 Ma. Mineralization of the deposit is divided into barren massive quartz (stage I), Au–Ag–Te mineralization occurring in quartz‐adularia‐clays banded ore (Stage II), intensive brecciation (Stage III), post‐ore coarse amethyst (Stage IV), carbonate (Stage V), and supergene stages (Stage VI). In the supergene stage various secondary minerals, including rare bilibinskite, bogdanovite, bessmertnovite metallic alloys, secondary gold, and various oxides, formed under intensely oxidized conditions. Despite heavy oxidation of the ores in the deposit, Te and S fugacities are estimated as Stage II tellurides precipitated at the log f Te2 values ?9 and at log fS2 ?13 based on the chemical compositions of hypogene tellurides and sphalerite. Homogenization temperature of fluid inclusions in quartz broadly ranges from 200 to 300°C. Ore texture, fluid inclusions, gangue, and vein mineral assemblages indicate that the Aginskoe deposit is a low‐sulfidation (quartz–adularia–sericite) vein system. 相似文献
14.
Yu. N. Nikolaev I. A. Baksheev V. Yu. Prokofiev E. V. Nagornaya L. I. Marushchenko Yu. N. Sidorina A. F. Chitalin I. A. Kal’ko 《Geology of Ore Deposits》2016,58(4):284-307
Mineralogical, fluid inclusion, and geochemical studies of precious metal mineralization within the Baimka trend in the western Chukchi Peninsula have been preformed. Porphyry copper–molybdenum–gold deposits and prospects of the Baimka trend are spatially related to monzonitic rocks of the Early Cretaceous Egdygkych Complex. Four types of precious metal-bearing assemblages have been identified: (1) chalcopyrite + bornite + quartz with high-fineness native gold enclosed in bornite, (2) low-Mn dolomite + quartz + sulfide (chalcopyrite, sphalerite, galena, tennantite-tetrahedrite) ± tourmaline with low-fineness native gold and hessite, (3) rhodochrosite + high-Mn dolomite + quartz + sulfide (chalcopyrite, sphalerite, galena, tennantite- tetrahedrite) with low-fineness native gold, electrum, acanthite, Ag and Au–Ag tellurides, and Ag sulfosalts, and (4) calcite + quartz + sulfide (chalcopyrite, sphalerite, galena) with low-fineness native gold, Ag sulfides and selenides, and Ag-bearing sulfosalts. Study of fluid inclusions from quartz, sphalerite, and fluorite have revealed that hydrothermal ores within the Baimka trend precipitated from fluids with strongly variable salinity at temperatures and pressures ranging from 594 to 104°C and from 1200 to 170 bar, respectively. An indicator of vertical AgPbZn/CuBiMo geochemical zoning is proposed. The value range of this indicator makes it possible to estimate the erosion level of the porphyry–epithermal system. The erosion level of the Baimka deposits and prospects deepens in the following order: Vesenny deposit → Pryamoi prospect → Nakhodka prospect → Peschanka deposit → III Vesenny prospect. 相似文献
15.
The Kabanga Ni sulfide deposit, Tanzania: I. Geology, petrography, silicate rock geochemistry, and sulfur and oxygen isotopes 总被引:1,自引:0,他引:1
Wolfgang D. Maier Sarah-Jane Barnes Arindam Sarkar Ed Ripley Chusi Li Tim Livesey 《Mineralium Deposita》2010,45(5):419-441
The Kabanga Ni sulfide deposit represents one of the most significant Ni sulfide discoveries of the last two decades, with
current indicated mineral resources of 23.23 Mt at 2.64% Ni and inferred mineral resources of 28.5 Mt at 2.7% Ni (Nov. 2008).
The sulfides are hosted by a suite of ∼1.4 Ga ultramafic–mafic, sill-like, and chonolithic intrusions that form part of the
approximately 500 km long Kabanga–Musongati–Kapalagulu igneous belt in Tanzania and Burundi. The igneous bodies are up to
about 1 km thick and 4 km long. They crystallized from several compositionally distinct magma pulses emplaced into sulfide-bearing
pelitic schists. The first magma was a siliceous high-magnesium basalt (approximately 13.3% MgO) that formed a network of
fine-grained acicular-textured gabbronoritic and orthopyroxenitic sills (Mg# opx 78–88, An plag 45–88). The magma was highly
enriched in incompatible trace elements (LILE, LREE) and had pronounced negative Nb and Ta anomalies and heavy O isotopic
signatures (δ18O +6 to +8). These compositional features are consistent with about 20% contamination of primitive picrite with the sulfidic
pelitic schists. Subsequent magma pulses were more magnesian (approximately 14–15% MgO) and less contaminated (e.g., δ18O +5.1 to +6.6). They injected into the earlier sills, resulting in the formation of medium-grained harzburgites, olivine
orthopyroxenites and orthopyroxenites (Fo 83–89, Mg# opx 86–89), and magmatic breccias consisting of gabbronorite–orthopyroxenite fragments within an olivine-rich matrix. All intrusions
in the Kabanga area contain abundant sulfides (pyrrhotite, pentlandite, and minor chalcopyrite and pyrite). In the lower portions
and the immediate footwall of two of the intrusions, namely Kabanga North and Kabanga Main, there occur numerous layers, lenses,
and veins of massive Ni sulfides reaching a thickness of several meters. The largest amount of high grade, massive sulfide
occurs in the smallest intrusion (Kabanga North). The sulfides have heavy S isotopic signatures (δ34S wr = +10 to +24) that broadly overlap with those of the country rock sulfides, consistent with significant assimilation
of external sulfur from the Karagwe–Ankolean sedimentary sequence. However, based partly on the relatively homogenous distribution
of disseminated sulfides in many of the intrusive rocks, we propose that the Kabanga magmas reached sulfide saturation prior
to final emplacement, in staging chambers or feeder conduits, followed by entrainment of the sulfides during continued magma
ascent. Oxygen isotope data indicate that the mode of sulfide assimilation changed with time. The heavy δ18O ratios of the early magmas are consistent with ingestion of the sedimentary country rocks in bulk. The relatively light
δ18O ratios of the later magmas indicate less bulk assimilation of the country rocks, but in addition the magmas selectively
assimilated additional S, possibly through devolatization of the country rocks or through cannibalization of magmatic sulfides
deposited in the conduits by preceding magma surges. The intrusions were tilted at ca. 1.37 Ga, during the Kibaran orogeny
and associated synkinematic granite plutonism. This caused solid-state mobilization of ductile sulfides into shear zones,
notably along the base of the intrusions where sulfide-hornfels breccias and lenses and layers of massive sulfides may reach
a thickness of >10 m and can extend for several 10 s to >100 m away from the intrusions. These horizons represent an important
exploration target for additional nickel sulfide deposits. 相似文献
16.
Marina A. Yudovskaya Vadim V. Distler Ilya V. Chaplygin Andrew V. Mokhov Nikolai V. Trubkin Sonya A. Gorbacheva 《Mineralium Deposita》2006,40(8):828-848
The distribution of gold in high-temperature fumarole gases of the Kudryavy volcano (Kurile Islands) was measured for gas, gas condensate, natural fumarolic sublimates, and precipitates in silica tubes from vents with outlet temperatures ranging from 380 to 870°C. Gold abundance in condensates ranges from 0.3 to 2.4 ppb, which is significantly lower than the abundances of transition metals. Gold contents in zoned precipitates from silica tubes increase gradually with a decrease in temperature to a maximum of 8 ppm in the oxychloride zone at a temperature of approximately 300°C. Total Au content in moderate-temperature sulfide and oxychloride zones is mainly a result of Au inclusions in the abundant Fe–Cu and Zn sulfide minerals as determined by instrumental neutron activation analysis. Most Au occurs as a Cu–Au–Ag triple alloy. Single grains of native gold and binary Au–Ag alloys were also identified among sublimates, but aggregates and crystals of Cu–Au–Ag alloy were found in all fumarolic fields, both in silica tube precipitates and in natural fumarolic crusts. Although the Au triple alloy is homogeneous on the scale of microns and has a composition close to (Cu,Ni,Zn)3(Au,Ag)2, transmission electron microscopy (TEM) shows that these alloy solid solutions consist of monocrystal domains of Au–Ag, Au–Cu, and possibly Cu2O. Gold occurs in oxide assemblages due to the decomposition of its halogenide complexes under high-temperature conditions (650–870°C). In lower temperature zones (<650°C), Au behavior is related to sulfur compounds whose evolution is strongly controlled by redox state. Other minerals that formed from gas transport and precipitation at Kudryavy volcano include garnet, aegirine, diopside, magnetite, anhydrite, molybdenite, multivalent molybdenum oxides (molybdite, tugarinovite, and ilsemannite), powellite, scheelite, wolframite, Na–K chlorides, pyrrhotite, wurtzite, greenockite, pyrite, galena, cubanite, rare native metals (including Fe, Cr, Mo, Sn, Ag, and Al), Cu–Zn–Fe–In sulfides, In-bearing Pb–Bi sulfosalts, cannizzarite, rheniite, cadmoindite, and kudriavite. Although most of these minerals are fine-grained, they are strongly idiomorphic with textures such as gas channels and lamellar, banded, skeletal, and dendrite-like crystals, characteristic of precipitation from a gas phase. The identified textures and mineral assemblages at Kudryavy volcano can be used to interpret geochemical origins of both ancient and modern ore deposits, particularly gold-rich porphyry and related epithermal systems. 相似文献
17.
We have studied textural relationships and compositions of phyllosilicate minerals in the mafic–ultramafic-hosted massive-sulfide deposit of Ivanovka (Main Uralian Fault Zone, southern Urals). The main hydrothermal phyllosilicate minerals are Mg-rich chlorite, variably ferroan talc, (Mg, Si)-rich and (Ca, Na, K)-poor saponite (stevensite), and serpentine. These minerals occur both as alteration products after mafic volcanics and ultramafic protoliths and, except serpentine, as hydrothermal vein and seafloor mound-like precipitates associated with variable amounts of (Ca, Mg, Fe)-carbonates, quartz and Fe and Cu (Co, Ni) sulfides. Brecciated mafic lithologies underwent pervasive chloritization, while interlayered gabbro sills underwent partial alteration to chlorite + illite ± actinolite ± saponite ± talc-bearing assemblages and later localized deeper alteration to chlorite ± saponite. Ultramafic and mixed ultramafic–mafic breccias were altered to talc-rich rocks with variable amounts of chlorite, carbonate and quartz. Chloritization, locally accompanied by formation of disseminated sulfides, required a high contribution of Mg-rich seawater to the hydrothermal fluid, which could be achieved in a highly permeable, breccia-dominated seafloor. More evolved hydrothermal fluids produced addition of silica, carbonates and further sulfides, and led to local development of saponite after chlorite and widespread replacement of serpentine by talc. The Ivanovka deposit shows many similarities with active and fossil hydrothermal sites on some modern oceanic spreading centers characterized by highly permeable upflow zones. However, given the arc signature of the ore host rocks, the most probable setting for the observed alteration–mineralization patterns is in an early-arc or forearc seafloor–subseafloor environment, characterized by the presence of abundant mafic–ultramafic breccias of tectonic and/or sedimentary origin.Editorial responsibility: J. Hoefs 相似文献
18.
O. Yu. Plotinskaya V. A. Kovalenker R. Seltmann C. J. Stanley 《Mineralogy and Petrology》2006,87(3-4):187-207
Summary The Late Paleozoic Kochbulak and Kairagach deposits are located on the northern slope of the Kurama Ridge, Middle Tien Shan,
in the same volcanic structure and the same ore-forming system. Au–Ag–Cu–Bi–Te–Se mineralization is confined to veins and
dissemination zones accompanied by quartz-sericite wall-rock alteration. The tellurides, calaverite, altaite, hessite, and
tetradymite are widespread at both deposits; at Kairagach selenides and sulfoselenides of Bi and Pb are common, while at Kochbulak
Bi and Pb telluroselenides and sulfotelluroselenides are typical. The paragenetic sequence of telluride assemblages are similar
for both deposits and change from calaverite + altaite + native Au to sylvanite + Bi tellurides + native Te, Bi tellurides
+ native Au, and, finally, to Au + Ag tellurides with time. These mineralogical changes are accompanied by an increase in
the Ag content of native gold that correlates with a decrease in temperature, fTe2 and fO2 and an increase in pH. 相似文献
19.
Gold deposits at El Sid are confined to hydrothermal quartz veins which contain pyrite, arsenopyrite, sphalerite and galena. These veins occur at the contact between granite and serpentinite and extend into the serpentinite through a thick zone of graphite schist. Gold occurs in the mineralized zone either as free gold in quartz gangue or dissolved in the sulfide minerals. Ore-microscopic study revealed that Au-bearing sulfides were deposited in two successive stages with early pyrite and arsenopyrite followed by sphalerite and galena. Gold was deposited during both stages, largely intergrown with sphalerite and filling microfractures in pyrite and arsenopyrite.Spectrochemical analyses of separated pyrite, arsenopyrite, sphalerite and galena showed that these sulfides have similar average Au contents. Pyrite is relatively depleted in Ag and Te. This suggests that native gold was deposited in the early stage of mineralization. Arsenopyrite and galena show relatively high concentrations of Te. They are also respectively rich in Au and Ag. Tellurides are, thus, expected to be deposited together with arsenopyrite and galena. 相似文献
20.
柿竹园和香炉山W多金属矿床中硫化物微量元素特征:来自原位LA-ICP-MS分析 总被引:1,自引:1,他引:0
华南包括两个世界级的W矿带,分别是南岭和江南造山带W成矿带。柿竹园W多金属矿床位于南岭地区,香炉山W矿床位于江南造山带东北部。两个矽卡岩W矿床都发育硫化物成矿阶段。但硫化物和成矿元素组成存在显著的差异。前者由含Pb、Zn、Ag硫化物和黝铜矿、银黝铜矿、含Ag斜方辉铅铋矿和铁硫锡铜矿硫盐组成;后者主要为磁黄铁矿。柿竹园远接触带Pb-Zn-Ag矿脉中硫化物(闪锌矿、黄铜矿、方铅矿和磁黄铁矿)较富集B、Mn、Cr、Sb、Sn和Hg,香炉山似层状矽卡岩和硫化物-白钨矿矿体中硫化物(磁黄铁矿、黄铜矿和闪锌矿)较富集W、Se和Bi。两个矿床中黄铜矿、闪锌矿和方铅矿较富集Ag,黄铜矿、闪锌矿富集In和Sn,闪锌矿还富集Cd。两个矿床中的硫化物微量元素分析表明与矽卡岩W矿成矿相关的硫化物可载有多种微量元素。这些元素参与到硫化物中程度由多种因素控制。具体如下,硫化物中B含量高低与成矿相关岩体中B含量相关;在相对高温和还原条件下,硫化物中W含量较高;闪锌矿中Mn和Cd与Zn发生取代作用; Cr可以一定程度进入到硫化物中,并受成矿流体中Cr含量影响; Se与S发生了一定程度的取代进入硫化物,并受流体中它的含量控制; Bi在闪锌矿与黄铜矿易形成固溶体;硫化物中Sb含量受初始流体中它的含量影响,方铅矿中易包裹一定的辉锑矿(Sb_2S_3)或含Sb的硫盐矿物; Ag是否形成独立的矿物相和进入哪些硫化物中,取决于流体中Ag的初始含量和硫化物的沉淀次序;硫化物中Hg的含量受温度影响。 相似文献