共查询到20条相似文献，搜索用时 46 毫秒
1.
Three large-scale instrumented waste rock piles were constructed at the Diavik Diamond Mine in the Northwest Territories, Canada. These experimental waste rock piles (test piles) are 15 m high and are part of an integrated field and laboratory research program to characterize and compare low-sulfide waste rock and drainage at various scales. During test pile construction, samples of the <50 mm fraction of waste rock were collected from two types of waste rock that are segregated during mining operations based on S content. The samples were analyzed for S content and particle size distribution. One test pile contained waste rock with an average of 0.035 wt.% S in the <50 mm fraction, within the operational S target of <0.04 wt.% S for the lower S waste rock type. The second test pile contained waste rock with an average of 0.053 wt.% S in the <50 mm fraction, lower than the operational S target of >0.08 wt.% S for the higher S waste rock type. The third test pile has a low permeability till layer and a low sulfide waste rock thermal layer covering a core of waste rock with average 0.082 wt.% S in the <50 mm fraction, which is within the operational S target of >0.08 wt.% S for the higher S waste rock. Particle size distributions for the lower and higher S waste rock are similar, but the higher S waste rock has a higher proportion of fine-grained particles. Sulfur determinations for discrete particle sizes of the <50 mm fraction illustrate higher S concentrations in smaller particles for both the lower S waste rock and the higher S waste rock. Similarly, S concentrations calculated for the >10 m scale, from composite blast hole cuttings, are lower than those calculated for the <50 mm scale. Acid–base accounting using standard methods and site-specific mineralogical information was used to calculate the ratio of neutralization potential to acid generating potential. A comparison of calculation approaches to pH and alkalinity data from humidity cell and test pile effluent suggest that ratios are very sensitive to the calculation method. The preferred calculation method was selected by comparing calculation results to pH and alkalinity data from humidity cell effluent collected over 95 weeks and test pile effluent collected over five field seasons. The preferred acid–base accounting values were obtained by calculating the average neutralization potential divided by the average acid potential of a sample set. This approach indicates that waste rock with >0.05 wt.% S is of uncertain acid-generating potential and effluent data indicate this waste rock generates acidic effluent; whereas lower S waste rock does not produce acidic effluent, consistent with the acid–base accounting predictions. 相似文献
2.
《Applied Geochemistry》2006,21(8):1347-1361
The relationships between factors that control subsurface flow and the timing, duration, and intensity of acidity generation and leaching of metals from waste-rock dumps are investigated. A 12 m high waste-rock pile that had been constructed in 1994 at Key Lake, Saskatchewan, Canada was disassembled, sampled and characterized in 2000. Physical properties that control water flow were characterized by measuring soil–water suction, volumetric water content, and the grain-size distribution at 60 randomized sites within the pile. Grain-size distribution was also measured at an additional 20 grid locations within the pile. Paste pH, pore-water geochemistry, mineralogy, and water-soluble extractions were used to investigate geochemical processes and sulfide oxidation at each of the 20 grid locations. A field-based soil–water characteristic curve could not be developed from the spatially variable and hysteretic field data; consequently, the grain-size distribution was used as a relative measure of subsurface flow and of the tendency to contain water under unsaturated conditions. The geochemical characterization demonstrated that marcasite underwent preferential weathering relative to pyrite and chalcopyrite, that dolomite was the main buffering carbonate mineral, and that gypsum, jarosite, and Fe oxyhydroxides were the main secondary (supergene) minerals. The pore waters contained up to 78,000 mg L−1 SO4, 690 mg L−1 Ni and 1400 mg L−1 U (800, 11.7 and 6 mM, respectively), suggesting that significant weathering had occurred. The pore water chemistry varied considerably between sampling sites. However, neither a correlation of pore-water chemistry with grain-size distribution nor a spatial relationship within the sampled grid was discernible. 相似文献
3.
Three large-scale experimental waste rock piles (test piles) were constructed and instrumented at the Diavik Diamond Mine in the Northwest Territories, Canada, as part of an integrated field and laboratory study to measure and compare physical and geochemical characteristics of experimental, low sulfide waste rock piles at various scales. This paper describes the geochemical response during the first season from a test pile containing 0.053 wt.% S. Bulk drainage chemistry was measured at two sampling points for pH, Eh, alkalinity, dissolved cations and anions, and nutrients. The geochemical equilibrium model MINTEQA2 was used to interpret potential mineral solubility controls on water chemistry. The geochemical response characterizes the initial flushing response of blasting residues and oxidation products derived from sulfides in waste rock exposed to the atmosphere for less than 1 year. Sulfate concentrations reached 2000 mg L−1 when ambient temperatures were >10 °C, and decreased as ambient temperatures declined to <0 °C. The pH decreased to <5, concomitant with an alkalinity minimum of <1 mg L−1 (as total CaCO3), suggesting all available alkalinity is consumed by acid-neutralizing reactions. Concentrations of Al and Fe were <0.36 and <0.11 mg L−1, respectively. Trends of pH and alkalinity and the calculated saturation indices for Al and Fe (oxy)hydroxides suggest that dissolution of Al and Fe (oxy)hydroxide phases buffers the pH. The effluent water showed increased concentrations of dissolved Mn (<13 mg L−1), Ni (<7.0 mg L−1), Co (<1.5 mg L−1), Zn (<0.5 mg L−1), Cd (<0.008 mg L−1) and Cu (<0.05 mg L−1) as ambient temperatures increased. Manganese is released by aluminosilicate weathering, Ni and Co by pyrrhotite [Fe1−xS] oxidation, Zn and Cd by sphalerite oxidation, and Cu by chalcopyrite [CuFeS2] oxidation. No dissolved metals appear to have discrete secondary mineral controls. Changes in SO4, pH and metal concentrations indicate sulfide oxidation is occurring and effluent concentrations are influenced by ambient temperatures and, possibly, increasing flow path lengths that transport reaction products from previously unflushed waste rock. 相似文献
4.
The physicochemical processes that affect acid mine drainage (AMD) in unsaturated waste rock piles and the capabilities of small-scale laboratory experiments to predict AMD from waste rock are not well understood. An integrated laboratory and field study to measure and compare low sulfide waste rock and drainage characteristics at various scales has been initiated. This paper describes the design, construction and instrumentation of three field-scale experimental waste rock piles (test piles), and six active zone lysimeters at the Diavik diamond mine in the Northwest Territories, Canada. The test piles are comprised of granitic and sulfide-bearing metasedimentary waste rock excavated during open pit mining operations. One test pile contains waste rock with a target S content of <0.04 wt.% S; the second test pile contains waste rock with a target S content of >0.08 wt.% S; and the third test pile contains the higher sulfide waste rock (>0.08 wt.% S) and was re-sloped and capped with a low permeability till layer and a low sulfide waste rock cover. The first two test piles are approximately 15 m high with bases of 50 m by 60 m, and the re-sloped test pile has a larger base of 80 m by 125 m. Instrumentation was selected to measure matrix flow, geochemistry of pore water and drainage, gas-phase O2 concentration, temperature evolution, microbiological populations, waste rock permeability to air, and thermal conductivity, as well as to resolve mass and flow balances. Instrument locations were selected to characterize coupled physicochemical processes at multiple scales and the evolution of those processes over time. Instruments were installed at a density such that the number of instruments that survived construction (40% to >80% by instrument type) was sufficient to allow adequate characterization of the physicochemical processes occurring at various scales in the test piles. 相似文献
5.
Continuous monitoring of a 15 m high heavily instrumented experimental waste rock pile (0.053 wt.% S) since 2006 at the Diavik diamond mine in northern Canada provided a unique opportunity to study the evolution of fresh run-of-mine waste rock as it evolved over annual freeze–thaw cycles. Samples were collected from soil water solution samplers to measure pore water properties, from twelve 4 to 16 m2 basal collection lysimeters to measure basal leachate properties in the region underlying the crest of the pile (the core), and from basal drains to measure aggregate total pile leachate properties. By 2012, monitoring of pore water geochemistry within the core structure of the test pile revealed an apparent steady state with respect to weathering geochemistry, represented by (i) a flush of pre-existing blasting residuals and applied tracers, (ii) declining pH, (iii) a stepwise progression and subsequent equilibrium with acid-neutralizing phases (depletion of available carbonates; equilibrium with respect to aluminum hydroxide phases and subsequent iron (III) hydroxide phases), and (iv) concordant release of SO4, major cations (Ca, Mg, K, Na, Si), and trace metals (Al, Fe, Ni, Co, Cu, Zn). Distinct, high concentration ‘spring flushes’, characteristic of drainage in northern environments and primarily explained by a combination of fluid residence time and the build-up of oxidation products over the winter, were released from core drainage each season. Following the initial flush, the concentration of all dissolved constituents steadily declined, with distinct minimums prior to freeze-up. The opposite trend was observed in the cumulative pile drainage, in which early season leachate dominated by snowmelt and batter flow had low concentrations and late season leachate dominated by contributions from the core of the pile (indicated by season end merging of core and cumulative drainage geochemistry) had higher concentrations. Northern waste rock pile drainage geochemistry is strongly influenced by freeze–thaw cycling and varying core and batter subsystem contributions to total drainage. A comprehensive understanding of thermal cycling in waste rock piles is an important component of temporal predictions of drainage water composition based on up-scaling or reactive transport modeling. 相似文献
6.
《Applied Geochemistry》2005,20(5):907-917
Solutions draining the Alta Mine, Jefferson County, MT, were contaminated by acid sulfate waters (ASW) generated from anthropogenic exposure of meteoric waters to sulfidic underground mine workings and a waste-rock pile. In 1999, a remediation effort was initiated in an attempt to improve the quality of water draining the site through removal of the waste-rock pile with which these solutions come in contact. ASW were sampled in the mineshaft prior to entering the waste-rock pile and upon discharge from the waste-rock pile aquifer near the pile toe. ASW composition changed as solutions flowed through the waste-rock pile due to sulfide and silicate weathering and schwertmannite precipitation.Schwertmannite and goethite were both sampled in the waste-rock pile where a distinct field relation was observed between the two minerals. Schwertmannite was always in contact with actively flowing ASW, while goethite was never in direct contact with ASW and was generally above the waste-rock water table. Goethite is hypothesized to be re-dissolved/re-precipitated schwertmannite that was deposited under higher flow conditions and subsequently transformed to goethite through exposure to wet/dry cycling associated with seasonal fluctuations in the amount of water moving through the hydrogeologic system. Trace metal concentrations in ammonium oxalate extracts of these minerals provides the first published data on the behavior of multiple trace metals through this phase transformation, which has important ramifications for considering schwertmannite as a long term metal sink due to its known metastability with respect to goethite. A relative retention scale through this phase transformation of Pb > Zn, Mn > As, Al, Cu is potentially applicable to other ASW systems. 相似文献
7.
Study of Ni sorption onto Tio mine waste rock surfaces 总被引：1，自引：0，他引：1
B. Plante M. Benzaazoua B. Bussire M.C. Biesinger A.R. Pratt 《Applied Geochemistry》2010,25(12):1830-1844
Sorption phenomena are known to play significant roles in metal mobility in mine drainage waters. The present study focuses on sorption phenomena controlling Ni concentrations in contaminated neutral drainage issued from the waste rock piles of the Tio mine, a hematite–ilmenite deposit near Havre-Saint-Pierre, Québec, Canada exploited by Rio Tinto Iron and Titanium. Batch sorption tests were conducted on waste rock samples of different composition and degree of alteration, as well as on the main mineral phases purified from the waste rocks. Sorbed phases were submitted to sequential extractions, XPS and DRIFT studies for further interpretation of sorption phenomena. The results from the present study confirm that sorption phenomena play a significant role in the Tio mine waste rocks, and that the main sorbent phases are the residual ilmenite ore in waste rocks, as well as plagioclase, the main gangue mineral. Sequential extractions suggest that most sorption sites are associated with reducible fractions, and XPS results indicate that Ni is sorbed as the hydroxide Ni(OH)2. The results from the present study provide useful information on sorption phenomena involved in the Tio mine waste rocks and enable further interpretation of Ni geochemistry in contaminated neutral drainage. 相似文献
8.
《Applied Geochemistry》2006,21(2):377-403
Predictions of mine-related water pollution are often based on laboratory assays of mine-site material. However, many of the factors that control the rate of element release from a site, such as pH, water–rock ratio, the presence of secondary minerals, particle size, and the relative roles of surface-kinetic and mineral equilibria processes can exhibit considerable variation between small-scale laboratory experiments and large-scale field sites.Monthly monitoring of mine effluent and analysis of natural geological material from four very different mine sites have been used to determine the factors that control the rate of element release and mineral sources and sinks for major elements and for the contaminant metals Zn, Pb, and Cu. The sites are: a coal spoil tip; a limestone-hosted Pb mine, abandoned for the last 200 a; a coal mine; and a slate-hosted Cu mine that was abandoned 150 a ago. Hydrogeological analysis of these sites has been performed to allow field fluxes of elements suitable for comparison with laboratory results to be calculated. Hydrogeological and mineral equilibrium control of element fluxes are common at the field sites, far more so than in laboratory studies. This is attributed to long residence times and low water–rock ratios at the field sites. The high water storativity at many mine sites, and the formation of soluble secondary minerals that can efficiently adsorb metals onto their surfaces provides a large potential source of pollution. This can be released rapidly if conditions change significantly, as in, for example, the case of flooding or disturbance. 相似文献
9.
The historical (1932–1971) Bralorne mine produced over 87 million grams of Au from an archetypal orogenic lode gold deposit in southwest British Columbia. High concentrations of As in mine drainage, however, represent an on-going environmental concern prompting a detailed study of effluent chemistry. The discharge rate at the mine portal was monitored continuously over a fourteen-month period during which effluent samples were collected on a quasi-weekly basis. Water samples were also collected on synoptic surveys of the adit between the portal and the main source of flow in the flooded workings. Total concentrations of As in the mildly alkaline (pH = 8.7) portal drainage average 3034 μg/L whereas at the source they average 5898 μg/L. As emergent waters from the flooded workings flow toward the portal, their dissolved oxygen content and pH increase from 0 to 10 mg/L and from 7.7 to 9, respectively. Near the emergence point, dissolved Fe precipitates rapidly, sorbing both As(III) and As(V). With increasing distance from the emergence point, dissolved As(III) concentrations drop to detection limits through sorption on hydrous ferric oxide and through oxidation to As(V). Concentrations of dissolved As(V), on the other hand, increase and stabilize, reflecting lower sorption at higher pH and the lack of available sorbent. Nonetheless, based on synoptic surveys, approximately 35% of the source As load is sequestered in the adit resulting in As sediment concentrations averaging 8.5 wt%. The remaining average As load of 1.34 kg/d is discharged from the portal. Partitioning of As(V) between dissolved and particulate phases in portal effluent is characterized by a sorption density of 0.37 mol As (mol Fe)−1 and by a distribution coefficient (Kd) of 130 L/g HFO. The relatively high sorption density may reflect co-precipitation of As with Fe oxyhydroxides rather than a purely adsorption-controlled process. Results of this study show that the As self-mitigating capacity of drainage from orogenic lode gold deposits may be poor in high-pH and Fe-limited settings. 相似文献
10.
Two experimental waste-rock piles (test piles), each 15 m in height × 60 m × 50 m, were constructed at the Diavik diamond mine in Northern Canada to study the behavior of low-sulfide content waste rock, with a similarly low acid-neutralization potential, in a continuous permafrost region. One test pile with an average of 0.035 wt.% S (<50 mm fraction; referred to as Type I) and a second test pile with an average of 0.053 wt.% S (<50 mm fraction; referred to as Type III) were constructed in 2006. The average carbon content in the <50 mm fraction of waste rock in the Type I test pile was 0.031 wt.% as C and in the Type III test pile was 0.030 wt.% as C. The NP:AP ratio, based on the arithmetic mean of particle-size weighted NP and AP values, for the Type I test pile was 12.2, suggesting this test pile was non-acid generating and for the Type III test pile was 2.2, suggesting an uncertain acid-generating potential. The Type I test pile maintained near-neutral pH for the 4-year duration of the study. Sulfate and dissolved metal concentrations were low, with the exception of Ni, Zn, Cd, and Co in the fourth year following construction. The pore water in the Type III test pile contained higher concentrations of SO42− and dissolved metals, with a decrease in pH to <4.7 and an annual depletion of alkalinity. Maximum concentrations of dissolved metals (20 mg L−1 Ni, 2.3 mg L−1 Cu, 3.7 mg L−1 Zn, 35 μg L−1 Cd, and 3.8 mg L−1 Co) corresponded to decreases in flow rate, which were observed at the end of each field season when the contribution of the total outflow from the central portion of the test pile was greatest. Bacteria were present each year in spite of annual freeze/thaw cycles. The microbial community within the Type I test pile included a population of neutrophilic S-oxidizing bacteria. Each year, changes in the water quality of the Type III test-pile effluent were accompanied by changes in the microbial populations. Populations of acidophilic S-oxidizing bacteria and Fe-oxidizing bacteria became more abundant as the pH decreased and internal test pile temperatures increased. Irrespective of the cold-climate conditions and low S content of the waste rock, the geochemical and microbiological results of this study are consistent with other acid mine drainage studies; indicating that a series of mineral dissolution–precipitation reactions controls pH and metal mobility, and transport is controlled by matrix-dominated flow and internal temperatures. 相似文献
11.
Jamil A. Sader Keiko Hattori Stewart Hamilton Kerstin Brauneder 《Applied Geochemistry》2011,26(9-10):1649-1664
The speciation and solubility of kimberlite pathfinder metals (Ni, Nd, Ba and K) in shallow peat groundwaters is investigated over the Yankee, Zulu and Golf kimberlites in the Attawapiskat region, James Bay Lowlands, Canada. The purpose of this study is to examine the relationship between dissolved organic matter (DOM) complexation with kimberlite pathfinder metals and determine the spatial distribution of those metals in shallow peat groundwaters along sampling transects over subcropping kimberlites. Nickel, Nd, Ba and K complexation with DOM and the adsorption of these metals onto ferrihydrite were calculated using Visual MINTEQ 3.0 and the NICA-Donnan database. Calculations predict almost 100% of soluble Nd, Ni and Ba form complexes with DOM at sampling sites with little to no contribution from upwelling groundwater (i.e., dissolved organic C (DOC) concentrations = 40–132 mg/L, pH = 3.9–5.5, and log ionic strength ??3). In only the most ombrotrophic peat groundwater conditions does a majority fraction of K bind to DOM. By contrast, under conditions with large contributions from upwelling groundwaters (i.e., DOC concentrations ?40 mg/L, pH = 5.5–6.5, and log ionic strength = ?3 to ?2), as little as 10% of Nd and Ni, and 0% K and Ba are predicted to complex with DOM. The modeling calculations suggest the dominant control on metal–DOM complexation, particularly with respect to Ni and Nd, is competitive effects for DOM binding sites due to elevated ionic strength where there is evidence of strong groundwater upwelling. Visual MINTEQ modeling of metal adsorption on ferrihydrite surfaces predicts that under strong upwelling conditions, Ni and Nd are scavenged from solution due to increased ferrihydrite precipitation and decreased fractions of metals complexed with DOM. Analytical geochemical data are consistent with model predictions of metal adsorption on ferrihydrite. Total dissolved Ni and Nd concentrations at sites of strong upwelling are up to five times lower than waters with little to no upwelling and log ferrihydrite saturation indices (logSIferr) indicate precipitation (values up to 5) at sites of strong groundwater upwelling. Where the majority of Ni and Nd complex with DOM and ferrihydrite is highly under saturated (logSIferr = ?18 to ?5), the concentrations of total Ni and Nd are elevated compared to other sites along sampling transects. Metal complexation with DOM effectively inhibits metal scavenging from solution via adsorption and/or from forming secondary mineral precipitates. Also, because alkaline earth metals do not compete strongly with Ni and Nd for adsorption sites on ferrihydrite surfaces, but do compete strongly for insoluble organic sites, Ni and Nd are more likely to adsorb onto ferrihydrite. 相似文献
12.
The interaction of groundwater with cement in a geological disposal facility (GDF) for intermediate level radioactive waste will produce a high pH leachate plume. Such a plume may alter the physical and chemical properties of the GDF host rock. However, the geochemical and mineralogical processes which may occur in such systems over timescales relevant for geological disposal remain unclear. This study has extended the timescale for laboratory experiments and shown that, after 15 years two distinct phases of reaction may occur during alteration of a dolomite-rich rock at high pH. In these experiments the dissolution of primary silicate minerals and the formation of secondary calcium silicate hydrate (C–S–H) phases containing varying amounts of aluminium and potassium (C–(A)–(K)–S–H) during the early stages of reaction (up to 15 months) have been superseded as the systems have evolved. After 15 years significant dedolomitisation (MgCa(CO3)2 + 2OH− → Mg(OH)2 + CaCO3 + CO32−(aq)) has led to the formation of magnesium silicates, such as saponite and talc, containing variable amounts of aluminium and potassium (Mg–(Al)–(K)–silicates), and calcite at the expense of the early-formed C–(A)–(K)–S–H phases. This occured in high pH solutions representative of two different periods of cement leachate evolution with little difference in the alteration processes in either a KOH and NaOH or a Ca(OH)2 dominated solution but a greater extent of alteration in the higher pH KOH/NaOH leachate. The high pH alteration of the rock over 15 years also increased the rock’s sorption capacity for U(VI). The results of this study provide a detailed insight into the longer term reactions occurring during the interaction of cement leachate and dolomite-rich rock in the geosphere. These processes have the potential to impact on radionuclide transport from a geodisposal facility and are therefore important in underpinning any safety case for geological disposal. 相似文献
13.
《Applied Geochemistry》2005,20(1):193-205
Sorption and precipitation of Co(II) in simplified model systems related to the Hanford site high-level nuclear waste tank leakage were investigated through solution studies, geochemical modeling, and X-ray absorption fine structure (XAFS) spectroscopy. Studies of Co(II) sorption to pristine Hanford sediments (ERDF and Sub), which consist predominantly of quartz, plagioclase, and alkali feldspar, show an adsorption edge centered at pH ≈ 8.0 for both sediments studied, with sorption >99% above pH ≈ 9.0. Aqueous SiO2 resulting from dissolution of the sediments increased in concentration with increasing pH, though the systems remained undersaturated with respect to quartz. XAFS studies of Co(II) sorption to both sediment samples reveal the oxidation of Co(II) to Co(III), likely by dissolved O2, although this oxidation was incomplete in the Sub sediment samples. The authors propose that Fe(II) species, either in aqueous solution or at mineral surfaces, partially inhibited Co(II) oxidation in the Sub sediment samples, as these sediments contain significantly higher quantities of Fe(II)-bearing minerals which likely partially dissolved under the high-pH solution conditions. In alkaline solutions, Al precipitated as bayerite, gibbsite, or a mixture of the two at pH > 7; an amorphous gel formed at pH values less than 7. Aqueous Co concentrations were well below the solubility of known Co-bearing phases at low pH, suggesting that Co was removed from solution through an adsorption mechanism. At higher pH values, Co concentrations closely matched the solubility of a Co-bearing hydrotalcite-like solid. XAFS spectra of Co(II) sorbed to Al-hydroxide precipitates are similar to previously reported spectra for such hydrotalcite-like phases. The precipitation processes observed in this study can significantly reduce the environmental hazard posed by 60Co in the environment. 相似文献
14.
《Applied Geochemistry》2005,20(8):1445-1460
Changes in precipitate mineralogy, morphology, and major and trace element concentrations and associations throughout 5 coal mine drainage (CMD) remediation systems treating discharges of varying chemistries were investigated in order to determine the factors that influence the characteristics of precipitates formed in passive systems. The 5 passive treatment systems sampled in this study are located in the bituminous coal fields of western Pennsylvania and northern Maryland, and treat discharges from Pennsylvanian age coals. The precipitates are dominantly (>70%) goethite. Crystallinity varies throughout an individual system, and lower crystallinity is associated with enhanced sorption of trace metals. Degree of crystallinity (and subsequently morphology and trace metal associations) is a function of the treatment system and how rapidly Fe(II) is oxidized, forms precipitates, aggregates and settles. Precipitates formed earlier in the passive treatment systems tend to have the highest crystallinity and the lowest concentrations of trace metal cations. High surface area and cation vacancies within the goethite structure enable sorption and incorporation of metals from coal mine drainage-polluted waters. Sorption affinities follow the order of Zn > Co ≈ Ni > Mn. Cobalt and Ni are preferentially sorbed to Mn oxide phases when these phases are present. As pH increases in the individual CMD treatment systems toward the pHpzc of goethite, As sorption decreases and transition metal (Co, Mn, Ni and Zn) sorption increases. Sulfate, Na and Fe(II) concentrations may all influence the sorption of trace metals to the Fe hydroxide surface. Results of this study have implications not only for solids disposal and resource recovery but also for the optimization of passive CMD treatment systems. 相似文献
15.
A field experiment is being carried out at the Diavik diamond mine in northern Canada to investigate the influence of unsaturated flow behavior on the quality of drainage from mine waste rock piles in a region of continuous permafrost. This paper is part of a series describing processes affecting the weathering of waste rock and transport of reaction products at this site; here the focus is on unsaturated water flow and its role in mass loading. Two 15 m-high instrumented test piles have been built on 60 m by 50 m collection systems, each consisting of lysimeters and a large impermeable high-density polyethylene (HDPE) liner. Collection lysimeters are installed nearby to investigate infiltration in the upper 2 m of the waste rock. Porosity, water retention curves, and hydraulic conductivity functions are estimated from field measurements and for samples ranging in size from 200 cm3 to 16 m3. Net infiltration in 2007 is estimated to have been 37% of the rainfall for mean annual rainfall conditions. Early-season infiltration freezes and is remobilized as the waste rock thaws. Wetting fronts migrate at rates of 0.2–0.4 m d−1 in response to common rainfall events and up to 5 m d−1 in response to intense rainfall. Pore water and non-reactive solutes travel at rates of <10−2 to 3 × 10−2 m d−1 in response to common rainfall events and up to 0.7 m d−1 in response to intense rainfall. Time-varying SO4 mass loading from the base of the test piles is dictated primarily by the flow behavior, rather than by changes in solute concentrations. 相似文献
16.
《Journal of Geochemical Exploration》2005,85(3):119-137
This study reports on the seepage of metals, metalloids and radionuclides from the Mary Kathleen uranium mill tailings repository. Since rehabilitation in the 1980s, the capped tailings have developed a stratified hydrochemistry, with acid (pH 3.7), saline, metal-rich (Fe, Mn, Ni, U ± As, Pb, Zn), oxygenated (1.05 mg L−1 DO), radioactive waters in the upper tailings pile and near-neutral pH (pH 7.57), metal-poor, reduced (0.08 mg L−1 DO) waters at depth. Seepage (∼0.5 L s−1) of acid (pH 5.5), metal-rich (Fe, Mn ± Ni, U, Zn), radioactive (U-235, U-238, Ra-226, Ra-228, Ac-227) waters occurs from the base of the tailings dam retaining wall into the former evaporation pond and local drainage system. Oxygenation of the seepage waters causes the precipitation of Fe and coprecipitation and adsorption of other metals (U, Y), metalloids (As), rare earth elements (Ce, La) and radionuclides (U-235, U-238). By contrast, alkalis and alkaline–earth elements (Ca, K, Mg, Na, Sr), Mn, sulfate and to some degree metals (U, Zn, Ni), rare earth elements (Ce, La) and radionuclides (U-235, U-238, Ra-226, Ra-228) remain in solution until pH neutralisation and evaporation lead to their precipitation in efflorescences and sulfate-rich evaporative sediments. While the release of contaminant loads from the waste repository through seepage is insignificant (e.g. ∼5 kg of U per year), surface waters downstream of the tailings impoundment possess TDS, U and SO4 concentrations that exceed Australian water quality guideline values in livestock drinking water. Thus, in areas with a semi-arid climate, even insignificant load releases of contaminants from capped tailings repositories can still cause the deterioration of water quality in ephemeral creek systems. 相似文献
17.
Redox buffering is one important factor to be considered when assessing the barrier function of potential host rocks for a deep geological repository for long-lived radioactive waste. If such a repository is to be sited in fractured crystalline host rock it must be demonstrated that waste will be emplaced deeper than the maximum depth to which oxidizing waters can penetrate from the earth’s surface via fractures, during the assessment timeframe (typically 1 Ma). An analogue for penetration of such oxidizing water occurs in the Cretaceous Toki Granite of central Japan. Here, a deep redox front is developed along water-conducting fractures at a depth of 210 m below the ground surface. Detailed petrographical studies and geochemical analyses were carried out on drill core specimens of this redox front. The aim was to determine the buffering processes and behavior of major and minor elements, including rare earth elements (REEs), during redox front development. The results are compared with analytical data from an oxidized zone found along shallow fractures (up to 20 m from the surface) in the same granitic rock, in order to understand differences in elemental migration according to the depth below the ground surface of redox-front formation. Geochemical analyses by XRF and ICP-MS of the oxidized zone at 210 m depth reveal clear changes in Fe(III)/Fe(II) ratios and Ca depletion across the front, while Fe concentrations vary little. In contrast, the redox front identified along shallow fractures shows strong enrichments of Fe, Mn and trace elements in the oxidized zone compared with the fresh rock matrix. The difference can be ascribed to the changing Eh and pH of groundwater as it flows downwards in the granite, due to reactions with rock forming minerals, in particular feldspar dissolution. These observations give important insights into the processes that control the rates of redox front penetration in fractured crystalline rock. The findings of the study can be used to help build confidence among stakeholders that radioactive waste would be emplaced in such rocks at greater depth than that to which oxidizing water is likely to penetrate in future. 相似文献
18.
Dissolved and particulate Zn and Ni concentrations were determined at 76 locations along the Yangtze River basin from the headwaters to the estuary during flood and dry seasons. Spatial and temporal variations of Zn and Ni were investigated and six major source zones were identified. The Three Gorges Dam (TGD) blocked most of the suspended loads and extremely low concentration of Zn and Ni were observed downstream of the dam. Dissolved (ranging from 0.062 to 8.0 μg L−1) and particulate (ranging from 12 to 110 mg kg−1) Ni showed similar levels of concentrations during flood and dry seasons, whereas dissolved (ranging from 0.43 to 49 μg L−1) and particulate (ranging from 54 to 1100 mg kg−1) Zn were slightly and much lower in the flood season than dry season, respectively. This was attributed to the increased water discharge during the flood season causing a dilution effect and sediment resuspension. In the flood season, average concentrations of Zn and Ni were higher in the main channel than in tributaries, due to soil erosion and mining activities providing the dominant inputs. The situation was opposite in the dry season, attributed to the contribution of municipal sewage, industrial activities, and waste disposal. During the flood season, dissolved Zn and Ni concentrations were negatively correlated with pH. Water and suspended particulate matter (SPM) from the upper reaches, middle reaches, and lower reaches of the Yangtze River were characterized by their Zn and Ni concentrations. The Panzhihua, Nanling and Tongling mining areas were considered as the most important source zones of particulate Zn and Ni. The Chongqing region, Wuhan region and the Yangtze River Delta provided most of the dissolved Zn and Ni inputs into the river. Annual net flux of Zn (10–72 × 105 kg a−1) and Ni (5.0–19 × 105 kg a−1) in each source zone were estimated according to their respective influent and effluent fluxes. Contributions of the source zones to Zn and Ni transport decreased from the upper reaches to the lower reaches. 相似文献
19.
Phosphorite from the Meade Peak Phosphatic Shale member of the Permian Phosphoria Formation has been mined in southeastern Idaho since 1906. Dumps of waste rock from mining operations contain high concentrations of Se which readily leach into nearby streams and wetlands. While the most common mineralogical residence of Se in the phosphatic shale is elemental Se, Se(0), Se is also an integral component of sulfide phases (pyrite, sphalerite and vaesite–pyritess) in the waste rock. It may also be present as adsorbed selenate and/or selenite, and FeSe2 and organo-selenides.Se release from the waste rock has been observed in field and laboratory experiments. Release rates calculated from waste rock dump and column leachate solutions describe the net, overall Se release from all of the possible sources of Se listed above. In field studies, Se concentration in seepage water (pH 7.4–7.8) from the Wooley Valley Unit 4 dump ranges from 3600 µg/L in May to 10 µg/L by Sept. Surface water flow, Q, from the seep also declines over the summer, from 2 L/s in May to 0.03 L/s in Sept. Se flux ([Se] ? Q) reaches a steady-state of < 150 mg/day in 1–4 months, depending upon the volume of Q. Se release (mg/L) follows a first order reaction with a rate constant, k, = 1.35 – 6.35e?3 h? 1 (11.8–55.6 yr? 1).Laboratory experiments were performed with the waste shale in packed bed reactors; residence time varied from 0.09 to 400 h and outlet pH ～ 7.5. Here, Se concentration increased with increasing residence time and release was modeled with a first order reaction with k = 2.19e?3 h? 1 (19.2 yr? 1).Rate constants reported here fall within an order of magnitude of reported rate constants for oxidation of Se(0) formed by bacterial precipitation. This similarity among rate constants from both field and laboratory studies combined with the direct observation of Se(0) in waste shales of the Phosphoria Formation suggests that oxidation of Se(0) may control steady-state Se concentration in water draining the Wooley Valley waste dump. 相似文献
20.
The ability of stormwater infiltration systems to retain Cr(VI) was tested by applying a synthetic stormwater runoff solution with a neutral pH and high Cr(VI) concentrations to four intact soil columns excavated from two roadside infiltration swales in Germany. Inlet flow rates mimicked normal (10 mm in 2 h) and extreme (100 mm in 3 h) rain events. The objectives were to understand the behaviour of the anionic and toxic Cr(VI) in soil at neutral pH and to asses treatment efficiency towards Cr(VI). During normal rain events Cr(VI) was largely retained (more than 50%), even though pH was neutral, while under extreme rain events approximately 20% of Cr(VI) was retained. In both cases effluent concentrations of Cr(VI) would exceed the threshold value of 3.4 μg/L if the infiltrated water were introduced to freshwater environments. More knowledge on the composition of the stormwater runoff, and especially the occurrence of Cr(VI), is needed. 相似文献