首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Integrated electrical resistance tomography (ERT) and short-offset transient electromagnetic (TEM) measurements were carried out to investigate a geothermal area in the Main Central Thrust (MCT) zone of Garhwal Himalayan region, India. The study area is located around Helang on either side of Alaknanda River and it is dotted with hot water springs with water temperature of 45°–55 °C emerging at the surface.To assess the geothermal potential and its lateral and vertical extension in and around the hot water springs in the study area, 7 ERT profiles and 21 TEM stations on 7 profiles were established around the hot water spring and at far distant locations. The 2D inversion of ERT data indicates a low resistivity (< 50 Ωm) zone in the vicinity of hot springs, which appears to be associated with an underground water channel through the fractured rock. The bedrock resistivity is very high (> 1000 Ωm) whereas the resistivity of the weathered near surface soil at a far distant location from the hot spring is low (< 100 Ωm) again. A common feature of all TEM data is the sign reversal observed at roughly 10 μs. The consistent sign reversal in all TEM data indicates the existence of the multi-dimensionality of the geoelectrical structure. Therefore, the TEM data were treated by using the SLDM (Spectral Lanczos Decomposition Method) 2D/3D forward modeling code based on the finite difference algorithm. The resistivity structure obtained from ERT data was used as an input for the modeling of TEM data. Based on the joint analysis of the ERT and TEM data it can be inferred that geothermal anomalies associated with the hot spring in the MCT zone are a local feature appearing as a low resistivity zone (< 50 Ωm) at shallow depth (< 100 m) in the vicinity of the hot spring region.  相似文献   

2.
In this paper we analyze the onsite characterization of a geosynthetic clay liner (GCL) that serves to ensure the impermeability of a landfill cap by DC electrical methods. The imaging of the GCL geoelectrical properties is a challenging problem because it is a very thin (between 4 and 7 mm thick) and resistive layer (from 100,000 to 2,000,000 Ω·m) depending on meteorological conditions and aging. We compare results obtained using electrical resistivity tomography (ERT) using two different kinds of arrays (dipole–dipole DD and Wenner–Schlumberger) on an experimental site with engineered defects. To confirm these results and to find the real onsite GCL resistivity we have performed sampling of the posterior distribution of this parameter using vertical electrical sounding (VES) inversions. Different VES methods were extracted from ERT with DD array and converted into a Schlumberger array.As a main conclusion the dipole–dipole array provides a better resistivity resolution of the defects than the Wenner–Schlumberger array. On ERT images, the defect detection seems to be impossible if the GCL has very high resistivity, as it happened when it was put in place. Taking into account the equivalence rules, the inversions are in both cases (ERT and VES) compatible. The GCL resistivity estimated from PSO (particle swarm optimization) varies from 3.0 105 to 1.106 Ω·m depending on saturation conditions during the twenty first months of its placing. Then, the resistivity dropped to 4.104–9.104 Ω·m, indicating a probable chemical damage of the GCL due to aging. Finally the fact that the VES inversions are solved via PSO sampling allows for the detection of a very thin and resistive layer and opens the possibility of performing micro VES surveys along the landfill to detect possible GCL defects.  相似文献   

3.
The aim of this study is to define and characterize water bearing geological formation and to test the possibility of using geophysical techniques to determine the hydrogeological parameters in three areas in the Vientiane basin, Laos. The investigated areas are part of the Khorat Plateau where halite is naturally occurring at depths as shallow as 50 m in the Thangon Formation. Magnetic Resonance Sounding (MRS) has been used in combination with Vertical Electrical Sounding (VES) in different geological environments. In total, 46 sites have been investigated and the MRS and VES recognized the stratigraphic unit N2Q1–3, consisting of alluvial unconsolidated sediments, as the main water bearing unit. The aquifer thickness varies usually between 10 and 40 m and the depth to the main aquifer range from 5 to 15 m. The free water content is here up to 30%, and the decay times vary between 100 and 400 ms, suggesting a mean pore size equivalent to fine sand to gravel. The resistivity is highly variable, but usually around 10–1500 Ω-m, except for some sites in areas 1 and 2, where the aquifer is of low resistivity, probably related to salt water. Hydraulic and storage-related parameters such as transmissivity, hydraulic column, have been estimated from the MRS. The MRS together with VES has been shown to be a useful and important tool for identifying and distinguishing freshwater from possible salt-affected water as well as the salt-related clay layer of the Thangon Formation. This clay layer is characterized by very low free water content and a resistivity lower than 5 Ω-m and can be found in all 3 areas at depths from 15 to 50 m.  相似文献   

4.
I used theoretical forward models to show that a cavity embedded in a stratified sedimentary sequence can induce an equivalence problem in the ERT data inversion. Conductive top soil increases the misfit between the ground feature and the ERT model. The misfit depends on array and stratigraphy sequences. The latter induce an equivalence problem that manifests itself as wrong cavity depth positioning. The misfit is greater in the data acquired with Schlumberger array than with dipole–dipole.The ambiguity of ERT data inversion problems was tested in the detection of cavities linked to an 8th–6th century B.C. Sabine tomb, 3 m wide × 3 m long × 2 m high, excavated from a shaly gray volcanic ash (cinerite) layer covered by semi-lithoid tuff and top soil layers. In the real study I reduced the ambiguity in the inverse problem of ERT data using a priori information on geometry and resistivity of the cavity. The constrains were carried out from georadar data acquired with 80 and 200 MHz antenna. I demonstrate that this procedure has a practical application in cavity detection, and is a key to the reduction of the uncertainty inherent in the inversion process of ERT data.  相似文献   

5.
A combination of geophysical methods including continuous electrical resistivity and high-resolution Chirp sub-bottom profiling were utilized to characterize geologic controls on pore fluid salinity in the nearshore of Long Bay, SC. Resistivity values ranged from less than 1 Ω m to greater than 40 Ω m throughout the bay. Areas of elevated electrical resistivity suggest the influence of relatively fresher water on pore water composition. Geophysical evidence alone does not eliminate all ambiguity associated with lithological and porosity variations that may also contribute to electrical structure of shallow marine sediments. The anomalous field is of sufficient magnitude that lithological variation alone does not control the spatial distribution of elevated electrical resistivity zones. Geographical distribution of electrical anomalies and structures interpreted from nearby sub-bottom profiles indicates abrupt changes in shallow geologic units control preferential pathways for discharge of fresh water into the marine environment. Shore parallel resistivity profiles show dramatic decreases in magnitude with increasing distance from shore, suggesting a significant portion of the terrestrially driven fresh SGD in Long Bay is occurring via the surficial aquifer within a few hundred meters of shore.  相似文献   

6.
The eruptions of Mt Ruapehu in the North Island of New Zealand in 1995 and 1996 caused a tephra barrier to be formed across the outlet of Crater Lake. By 2005 seepage from the refilled lake into the barrier raised the possibility of an eventual collapse of the barrier, releasing a catastrophic lahar down the mountain.As part of an extensive monitoring programme of the tephra barrier, direct current (dc) resistivity surveys were carried out on a number of lines along and across it in order to test whether the extent of the seepage could be measured (and monitored) by geophysical means. Two dimensional inversion of measured apparent resistivity data showed that between the initial measurements, made in January 2005, and February 2006, there was a gradual decrease in resistivity above the old outlet from ~ 50–60 Ωm to ~ 30 Ωm. This gave the first indication that lake water was seeping into the barrier. Between October and December 2006 there was a rapid rise in lake level to only 2 m below the top of the barrier, and a further resistivity survey in January 2007 showed that there had been a further decrease in resistivity throughout the entire barrier with values dropping to < 10 Ωm. The extent of this low resistivity indicated that the barrier was now saturated. At this stage lake water was penetrating the barrier and starting to cause erosion on its downstream side. Catastrophic collapse occurred on 18 March 2007, accompanied by a lahar in the Whangaehu river valley.Subsequent forward 3D numerical modelling of the resistivity structure of the barrier has confirmed that the observed changes in measured resistivity were directly related to the progress of seepage of lake water into the barrier.  相似文献   

7.
Shallow carbonates are of utmost importance as potential sources of groundwater in karstified semi-arid terrains. Ground-Penetrating Radar (GPR) is being increasingly used as a prominent mapping tool in such environments. However, its potential in exploring and identifying shallow water-saturated zones (WSZs) in carbonates is constrained by the geoelectrical properties of carbonate soils as a function of moisture content. We report results of a case study that includes laboratory geoelectrical characterization and their comparison to in situ GPR attenuation measurements performed on Cretaceous Edwards Formation rudist mounds in central Texas, which we hypothesize as analogs for water-bearing formations in semi-arid karstified carbonate terrains. Dielectric measurements on field-collected rock samples carried out in the laboratory under controlled conditions of moisture saturation suggest that real and imaginary parts of dielectric constants of rocks with higher porosity and/or permeability have steeper dependence on pore moisture content; they produce better dielectric contrasts but allow shallower penetration. Our analyses suggest that within carbonates, dielectric contrasts improve with decrease in sounding frequency and/or increase in moisture content; and the relationship between dielectric permittivity and moisture content may be represented by 3rd order polynomial equations. GPR surveys using a wide-band 400 MHz antenna reveal subsurface mound morphologies with heights of ～ 1–2 m and basal diameters of ～ 8–10 m resembling outcrop analogs. Each mound appears to be composed of smaller amalgamated lithounits that seem geoelectrically similar. Amplitudes decays of the backscattered radar signal correlate to moisture distribution. Measuring the differences in signal attenuation allows differentiation between saturated and non-saturated zones. Velocity analyses of GPR profiles enable estimation of moisture distribution in the vicinity of the mounds. Optimal delineation and production of high-resolution GPR data up to a depth of ～ 10 m were observed for a sounding frequency of ～ 250 MHz with moisture content of ～ 5% by weight. Below this moisture level, the dielectric contrast is insufficient to uniquely identify water-saturated zones from the surrounding geoelectrical context, and above it, the radar signal is substantially attenuated leading to a total inefficiency of the method.  相似文献   

8.
In this work we present the hydrogeophysical imaging of a key sector of the Quaternary Po foreland basin (northern Italy), focussing on the reconstruction of clastic aquifers and aquitards in a complex tectono-sedimentary subsurface architecture. The study area includes the relic reliefs of Casalpusterlengo and Zorlesco, two smooth morphological features involving uplifted and gently folded Pleistocene marine to alluvial sediments, plausibly linked to the buried Northern Apennines thrust and fold belt. The geophysical data include 35 Direct Current Vertical Electrical Soundings collected over a 37 km2 wide area, acquired with Schlumberger array and maximum half-spacing of 500 m. 1-D resistivity-depth profiles were computed for each VES. An integrated hydrostratigraphic approach was applied, to constrain the interpretation of the geophysical data along several cross-sections, including the comparison of resistivity soundings to stratigraphic logs, borehole electric logs and the pore-water properties.The resistivity interfaces, traceable with the same laterally continuous vertical polarity, were used to develop an electrostratigraphic model in order to portray the stacking of electrostratigraphic units down to 200 m below ground surface. Their vertical associations show a general upward increase of electrical resistivity. This assemblage mimics the regional coarsening upwards depositional trend, from the conductive units of the Plio-Pleistocene marine-to-transitional depositional systems to the resistive units of the Middle–Late Pleistocene fluvial and alluvial plain depositional systems. Middle Pleistocene depositional systems host an alternation of North-dipping, high-to-intermediate permeability aquifer systems (70–180 Ωm, thickness of 5–70 m) separated by low permeability aquitards (20–50 Ωm, thickness up to 40 m). These units pinch out against the Casalpusterlengo and Zorlesco relic reliefs, where they cover the uplifted and folded regional aquitard (20–50 Ωm) formed by Pliocene-Lower Pleistocene clays to sandy silts with gravel lenses in agreement with borehole data. In the deepest part of the local stratigraphy, a broad low-resistivity anomaly (< 10 Ωm) was clearly mapped through the study area. By comparison with electrical borehole logs in deep oil-wells, it could be interpreted as the fresh–saltwater interface due to the presence of connate waters and brines hosted by the marine-to-transitional shales.  相似文献   

9.
The Geodynamic Observatory Moxa, located in Thuringia/Germany, is dedicated to studies of temporal deformations of the earth's crust and of variations of the gravity field. One of the essential issues with respect to these investigations is the reduction of the hydrological impact on the data of the gravimeters, strainmeters and tiltmeters. In order to optimise the reductions, we investigated the changes in the hydrological conditions in the woody mountain slope above the observatory with time-lapse electrical resistivity tomography (ERT), and analysed the strain and tilt measurements for prominent signatures of pore pressure induced subsurface deformations.Here we present the results for two profiles – parallel and perpendicular to the slope – measured with ERT during 33 campaigns between June 2007 and April 2010. Resistivity changes and variations of apparent soil moisture, inferred from ERT sections, were found to primarily occur in the first two metres of the subsurface. These variations can be related to subsurface flow in the upper two metres induced by precipitation events and snowmelts. Trees close to the profiles only show a minimum impact on the resistivity and soil moisture changes.Furthermore, systematic hydrologically induced deformations can be observed in hodographs of strain and tilt measurements for large precipitation events (> 80 mm) and snowmelts. In the strain data a short-term (< 3 days) dilatational signal is found with an amplitude of 20 nstrain to 60 nstrain and a long-term (> 7 days) compressional signal between 40 nstrain and 180 nstrain. The preferential N–S direction of long-term deformational signals (> 1 week) is also observed in the tilt data. The direction of tilt changes (25 nrad–120 nrad) is nearly parallel to the drainage direction of the nearby Silberleite creek indicating variations of pore pressure gradients during hydrological events.The results of these hydrological studies at the Geodynamic Observatory Moxa can be used for removing the time dependent hydrological signal in strain and tilt data and, thus, better correction algorithms for hydrological impacts can be developed to enhance the value of the data for geodynamic studies.  相似文献   

10.
72 inloop transient electromagnetic soundings were carried out on two 2 km long profiles perpendicular and two 1 km and two 500 m long profiles parallel to the strike direction of the Araba fault in Jordan which is the southern part of the Dead Sea transform fault indicating the boundary between the African and Arabian continental plates. The distance between the stations was on average 50 m.The late time apparent resistivities derived from the induced voltages show clear differences between the stations located at the eastern and at the western part of the Araba fault. The fault appears as a boundary between the resistive western (ca. 100 Ωm) and the conductive eastern part (ca. 10 Ωm) of the survey area. On profiles parallel to the strike late time apparent resistivities were almost constant as well in the time dependence as in lateral extension at different stations, indicating a 2D resistivity structure of the investigated area.After having been processed, the data were interpreted by conventional 1D Occam and Marquardt inversion. The study using 2D synthetic model data showed, however, that 1D inversions of stations close to the fault resulted in fictitious layers in the subsurface thus producing large interpretation errors. Therefore, the data were interpreted by a 2D forward resistivity modeling which was then extended to a 3D resistivity model. This 3D model explains satisfactorily the time dependences of the observed transients at nearly all stations.  相似文献   

11.
Seismic reflection data were acquired across volcanic hosted massive sulfides (VHMS) of Vihanti in order to improve the understanding of the regional geological setting. Commercially processed seismic data from Vihanti are of good quality, but reprocessing can be used to extract additional information about geological structures. Especially, careful velocity analysis influences the quality of seismic images. Differentiating reflections caused by fractures from those caused by lithological contacts is very important for exploration and geological modeling. Reflections from fracture zones known from drilling stack with lower velocity (~ 5100 m/s) compared to typical stacking velocities of the Vihanti area (> 5500 m/s). The reprocessing also indicated that fracture zones are better imaged with low frequencies due to the better overall continuity of the fault zones at scales of hundreds of meters rather than at shorter seismic wavelengths.In full stacks, long offset data can mask structure close to the surface. More detailed seismic images of the shallow subsurface emerged by preferentially stacking short offset data wherever acquisition and processing lines lay close together and were nearly straight. Long offset data remains valuable for imaging deeper structures as well as dipping reflectors. Cross-dip-analysis revealed a bright diffractor located near the base of the Vihanti volcanic basin at 1.5 km depth. The seismic data allow a geological interpretation in which the Vihanti structure has developed through significant thrust faulting and displacement of the lithological contacts. Gentle folds that were formed prior to faulting are visible as undulating reflectivity in seismic sections. The reprocessed seismic section indicates a potential deep extension of the ore-hosting altered volcanic and calc-silicate rocks previously unexplored.  相似文献   

12.
Where they are preserved, landforms that have been truncated and offset by past fault movements provide potentially valuable quantitative data that can be used to estimate slip rates. At such locations, it is important to investigate the fault zone in sufficient detail to understand how displacements are accommodated on individual fault strands. At a site along a northern section of the Alpine fault zone on the South Island of New Zealand, surface mapping of a series of faulted river terraces and channels has revealed a complicated and poorly understood paleoearthquake history. We have acquired high-resolution 2- and 3-D ground-penetrating radar (GPR) data over a large area (~ 500 × 500 m) of the terraces to map along-strike changes in shallow (<20 m) fault zone morphology. By identifying distinct reflection patterns within the topographically migrated 3-D GPR volumes and extrapolating them to the longer and more widely spaced GPR profiles, we determined the subsurface extent of two main structural/depositional facies that were juxtaposed by three left-stepping en-echelon fault strands. Two regions of warped strata are interpreted to result from transpressive folding between the overlapping strands, where displacement is transferred from one fault to the next. We suggest that diffuse deformation between the overlapping fault tips results in anomalously low estimates for horizontal and vertical fault displacements of some geomorphic features.  相似文献   

13.
We have combined tensor radio magnetotelluric- (RMT, 15–250 kHz) and controlled source tensor magnetotelluric (CSTMT, 1–12 kHz) data for the mapping of aquifers in gravel formations lying in between crystalline bedrock and clay rich sediments in the Heby area some 40 km west of Uppsala in Sweden. The estimated transfer functions, the impedance tensor and the tipper vector generally satisfy 1D or 2D necessary conditions except for the lowest CSTMT frequencies where near field effects become more dominant.The data measured from 8 profiles were inverted with the Rebocc code of Siripunvaraporn and Egbert (2000) assuming plane wave conditions. This meant that only 12 frequencies in the range of 4–180 kHz could be used. The four lowest frequencies of CSTMT in the range of 1–2.8 kHz were excluded because of source effects. Data from all profiles were inverted with a starting model of 100 Ω-m and a relative error floor of 0.02 on apparent resistivity, corresponding to less than 1° on phase. Tipper vectors are generally small except when source effects become dominant in the lowest frequencies of CSTMT and were therefore not used for inversion. Comparing with models derived from vertical electrical soundings, refraction and reflection seismic data as well as ground truth from exploration wells assessed the reliability of the deep part of the models. Furthermore we carried out a non-linear resolution analysis to better quantify the depth extent of the aquifers.The inverted models from the Heby area show well the thickness variations of glacial deposits overlying crystalline bedrock. Generally, the upper 20 m of the models have resistivities below 40 Ω-m, taken to represent clay rich formations. Below the clay layer resistivities increase to about 40–400 Ω-m, interpreted to represent sand/gravel formations with a maximum thickness of about 40 m and a width of several hundred metres. This is a potential aquifer that extends in approximately N–S direction for some kilometres.  相似文献   

14.
The Narmada–Son Lineament (NSL) Zone is the second most important tectonic feature after Himalayas, in the Indian geology. Magnetotelluric (MT) studies were carried out in the NSL zone along a 130 km long NNE-SSW trending profile. The area of investigation extends from Edlabad (20°46′16″; 75°59′05″) in the South to Khandwa (21°53′51″; 76°18′05″) in the North. The data shows in general the validity of a two-dimensional (2D) approach. Besides providing details on the shallow crustal section, the 2D modeling results resolved four high conductive zones extending from the middle to deep crust, spatially coinciding with the major structural features in the area namely the Gavligarh, Tapti, Barwani-Sukta and Narmada South faults. The model for the shallow section has brought out a moderately resistive layer (30–150 Ω m) representing the exposed Deccan trap layer, overlying a conductive layer (10–30 Ω m) inferred to be the subtrappean Gondwana sediments, the latter resting on a high resistive basement/upper crust. The Deccan trap thickness varies from around a few hundred meters to as much as 1.5 km along the traverse. A subtrappean sedimentary basin like feature is delineated in the northern half of the traverse where a sudden thickening of subtrappean sediments amounting to as much as 2 km is noticed. The high resistive upper crust is relatively thick towards the southern end and tends to become thinner towards the middle and northern part of the traverse. The lower crustal segment is conductive over a major part of the profile. Considering the generally enhanced heat flow values in the NSL region, coupled with characteristic gravity highs and enhanced seismic velocities coinciding with the mid to lower crustal conductors delineated from MT, presence of zones of high density mafic bodies/intrusives with fluids, presumably associated with magmatic underplating of the crust in the zone of major tectonic faults in NSL region are inferred.  相似文献   

15.
The Late Jurassic Kimmeridge Clay Formation (KCF) is an economically important, organic-rich source rock of Kimmeridgian–Early Tithonian age. The main rock types of the KCF in Dorset, UK, include grey to black laminated shale, marl, coccolithic limestone, and dolostone, which occur with an obvious cyclicity at astronomical timescales. In this study, we examine two high-resolution borehole records (Swanworth Quarry 1 and Metherhills 1) obtained as part of a Rapid Global Geological Events (RGGE) sediment drilling project. Datasets examined were total organic carbon (TOC), and borehole wall microconductivity by Formation Microscanner (FMS). Our intent is to assess the rhythmicity of the KCF with respect to the astronomical timescale, and to discuss the results with respect to other key Late Jurassic geological processes. Power spectra of the untuned data reveal a hierarchy of cycles throughout the KCF with ～ 167 m, ～ 40 m, 9.1 m, 3.8 m and 1.6 m wavelengths. Tuning the ～ 40 m cycles to the 405-kyr eccentricity cycle shows the presence of all the astronomical parameters: eccentricity, obliquity, and precession index. In particular, ～ 100-kyr and 405-kyr eccentricity cycles are strongly expressed in both records. The 405-kyr eccentricity cycle corresponds to relative sea-level changes inferred from sequence stratigraphy. Intervals with elevated TOC are associated with strong obliquity forcing. The 405-kyr-tuned duration of the lower KCF (Kimmeridgian Stage) is 3.47 Myr, and the upper KCF (early part of the Tithonian Stage, elegans to fittoni ammonite zones) is 3.32 Myr. Two other chronologies test the consistency of this age model by tuning ～ 8–10 m cycles to 100-kyr (short eccentricity), and ～ 3–5 m cycles to 36-kyr (Jurassic obliquity). The ‘obliquity-tuned’ chronology resolves an accumulation history for the KCF with a variation that strongly resembles that of Earth's orbital eccentricity predicted for 147.2 Ma to 153.8 Ma. There is evidence for significant non-deposition (up to 1 million years) in the lowermost KCF (baylei–mutabilis zones), which would indicate a Kimmeridgian/Oxfordian boundary age of 154.8 Ma. This absolute calibration allows assignment of precise numerical ages to zonal boundaries, sequence surfaces, and polarity chrons of the lower M-sequence.  相似文献   

16.
An airborne electromagnetic (AEM) survey using the Grounded Electrical-Source Airborne Transient Electromagnetic (GREATEM) system was conducted over the Kujukuri coastal plain in southeast Japan to assess the system's ability to accurately describe the geological structure beneath shallow seawater. To obtain high-quality data with an optimized signal-to-noise ratio, a series of data processing techniques were used to obtain the final transient response curves from the field survey data. These steps included movement correction, coordinate transformation, the removal of local noise, data stacking, and signal portion extraction.We performed numerical forward modeling to generate a three-dimensional (3D) resistivity structure model from the GREATEM data. This model was developed from an initial one-dimensional (1D) resistivity structure that was also inverted from the GREATEM field survey data. We modified a 3D electromagnetic forward-modeling scheme based on a finite-difference staggered-grid method and used it to calculate the response of the 3D resistivity model along each survey line. We verified the model by examining the fit of the magnetic-transient responses between field data and the 3D forward-model computed data, the latter of which were convolved with the measured system responses of the corresponding data set.The inverted 3D resistivity structures showed that the GREATEM system has the capability to map resistivity structures as far as 800 m offshore and as deep as 300–350 m underground in coastal areas of relatively shallow seawater depth (5–10 m).  相似文献   

17.
A three-dimensional (3D) modeling study was completed on a very large electrical resistivity survey conducted at a nuclear waste site in eastern Washington. The acquisition included 47 pole–pole two-dimensional (2D) resistivity profiles collected along parallel and orthogonal lines over an area of 850 m × 570 m. The data were geo-referenced and inverted using EarthImager3D (EI3D). EI3D runs on a Microsoft 32-bit operating system (e.g. WIN-2K, XP) with a maximum usable memory of 2 GB. The memory limits the size of the domain for the inversion model to 200 m × 200 m, based on the survey electrode density. Therefore, a series of increasing overlapping models were run to evaluate the effectiveness of dividing the survey area into smaller subdomains. The results of the smaller subdomains were compared to the inversion results of a single domain over a larger area using an upgraded form of EI3D that incorporates multi-processing capabilities and 32 GB of RAM memory. The contours from the smaller subdomains showed discontinuity at the boundaries between the adjacent models, which do not match the hydrogeologic expectations given the nature of disposal at the site. At several boundaries, the contours of the low resistivity areas close, leaving the appearance of disconnected plumes or open contours at boundaries are not met with a continuance of the low resistivity plume into the adjacent subdomain. The model results of the single large domain show a continuous monolithic plume within the central and western portion of the site, directly beneath the elongated trenches. It is recommended that where possible, the domain not be subdivided, but instead include as much of the domain as possible given the memory of available computing resources.  相似文献   

18.
The results obtained in this study show that as the dart leader tip passes a given point on the defunct return stroke channel the electric field increases within a fraction of a microsecond to values larger than the critical electric field necessary for the initiation of cold electron runaway in low-density air comprising the channel. These results are in support of the hypothesis that cold runaway electron breakdown may play a role in the emission of X-ray bursts by dart leaders. The calculations also show that the peak power dissipated by a typical dart leader is about 300–500 MW/m and the energy dissipated within the first 10 μs or so is about 500–600 J/m. Furthermore, the minimum resistance and the maximum radius of the core of a typical dart leader are estimated to be about 3 Ω/m and 0.003 m, respectively.  相似文献   

19.
Electrical resistivity methods are widely used for environmental applications, and they are particularly useful for the characterization and monitoring of sites where the presence of contamination requires a thorough understanding of the location and movement of water, that can act as a carrier of solutes. One such application is landfill studies, where the strong electrical contrasts between waste, leachate and surrounding formations make electrical methods a nearly ideal tool for investigation. In spite of the advantages, however, electrical investigation of landfills poses also challenges, both logistical and interpretational. This paper presents the results of a study conducted on a dismissed landfill, close to the city of Corigliano d'Otranto, in the Apulia region (Southern Italy). The landfill is located in an abandoned quarry, that was subsequently re-utilized about thirty years ago as a site for urban waste disposal. The waste was thought to be more than 20 m thick, and the landfill bottom was expected to be confined with an HDPE (high-density poli-ethylene) liner. During the digging operations performed to build a nearby new landfill, leachate was found, triggering an in-depth investigation including also non-invasive methods. The principal goal was to verify whether the leachate is indeed confined, and to what extent, by the HDPE liner. We performed both surface electrical resistivity tomography (ERT) and mise-à-la-masse (MALM) surveys, facing the severe challenges posed by the rugged terrain of the abandoned quarry complex. A conductive body, probably associated with leachate, was found as deep as 40 m below the current landfill surface i.e. at a depth much larger than the expected 20 m thickness of waste. Given the logistical difficulties that limit the geometry of acquisition, we utilized synthetic forward modeling in order to confirm/dismiss interpretational hypotheses emerging from the ERT and MALM results. This integration between measurements and modeling helped narrow the alternative interpretations and strengthened the confidence in results, confirming the effectiveness of non-invasive methods in landfill investigation and the importance of modeling in the interpretation of geophysical results.  相似文献   

20.
Several field surveys of a waste rock pile were carried out during the summers of 2002 and 2003 using ground-penetrating radar, electromagnetic conductivity and DC resistivity imaging. The waste rock deposit is prone to generate acid mine drainage (AMD) due to the oxidation of sulphidic minerals. One of the most critical factors that lead to the production of AMD is unsaturated water flow and the ensuing moisture distribution in the waste rock. This geophysical characterization study, performed over a 30 m × 30 m test zone, was designed to image the internal structure controlling the water flux at shallow depth. The subsurface was found to consist of three zones for the first 6 m of the pile, mainly based on electrical resistivities: a thin superficial conductive material, an intermediate 2 to 3 m thick highly resistive zone, and a lower, more conductive medium. With the help of hydrogeological tests, chemical analyses and two 2.5 m-deep trenches, it is shown that the two conductive zones are correlated with fine-grained waste rock and the resistive zone correlates with a coarser material. In the two deeper zones, the contact between the two types of waste rock is typically highlighted by a sharp resistive/conductive boundary. An increase of conductance in the relatively thin upper layer towards the edge of the pile appears to be caused by an increase in thickness of the fine-grained material. Additional geophysical surveys carried out on a profile along the flank of the upper bench of the pile show that the main features of the internal structure are sub-parallel to the slope, at least for the first 3 m in depth. The data also show an increase in resistivity from the top to bottom of the slope, in accordance with expected particle segregation, from fine-grained material at the top to coarser material at the bottom. Wide-angle reflection GPR monitoring during large scale infiltration tests seems to indicate preferential flow paths towards the direction of coarser, more pervious material (which also appears to be less oxidized). Water preferentially flows through the coarse-grained material, but it is stored by capillary forces in the fine-grained material. Apart from the deposition methods, the results strongly suggest that factors such as machinery-induced mechanical alteration, construction history of the pile, and increased oxidization near the edges could explain the resistivity model. The model interpreted from geophysical imaging agrees well with the conceptual model of the rock pile. The resistivity and GPR methods appear to be efficient geophysical methods to characterize the internal structure and preferential flow patterns within unsaturated waste rock piles.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号