共查询到20条相似文献，搜索用时 109 毫秒
1.
Robert J. Allison 《地球表面变化过程与地形》1988,13(8):729-736
Rock material strength is an important component of many geomorphological studies. Current methods for determining this parameter result in sample destruction, preventing further analysis. A new non-destructive technique is described for indirectly determining material strength, by measuring Dynamic Young's Modulus. Tests have been conducted on Jurassic Portland Limestone and Upper Cretaceous Chalk to assess the apparatus. Young's Modulus is becoming an increasingly important rock material property. 相似文献
2.
The reason for detailed investigation of problems related to earthquake phenomena, their prediction and undertaking of necessary protection measures, results from their disastrous consequences. Besides material damage, the loss of human lives is far too priceless.One of the main problems related to investigation of earthquake occurrence phenomenon is the problem of definition of earthquake released energy.Accelerations are also recognized as a very significant parameter used for solution of many problems.Such a problem is the definition of the released energy through the material expressed in a form of acceleration; the largest source being the energy released from earthquake origins.Definition of seismicity on the soil surface due to the effects of the released energy during an earthquake is carried out by using accelerations, velocities and displacements.In this respect, the author of this paper makes an attempt to point out the shortcomings in the existing analytical expressions for definition of ground accelerations. A new solution is also proposed by introducing a new concept in dissipation of the released energy through a material and by introducing a new factor which includes the main parameters and characteristics of the entire frequency content of the considered material. 相似文献
3.
Katinka KOLLand Andreas DITTRICH Institute of Resources Management Hydraulic Rural Engineering University of Karlsruhe Kaiserstr. Karlsruhe Germany. 《国际泥沙研究》2001,16(2)
1NFLU'ENCE OF SEDmeNT TRANSPORT ON ARMORED SURFACESKatinka KOLLl bo Antheas DrmCHlAbstract:LaboratOry exWnts have been cAned ou to stUdy the chateristics of stwen tZ'ansport inSteeP tw. The question is discussed wether an annM sMs is deStroyed due tD thebosport of material, because addihonal wises are tw on iL or the laye is shehe by thetranSN medal, beause a part of the stream poWer is used to move the material. Accordin tothe resultS of the PresN exH' in Wh the Me… 相似文献
4.
The basic goal of the present research is to investigate the estimation of both the in-situ density and moisture content within the Hot Mix Asphalt (HMA) pavement layer(s) in a non-destructive way using Ground Penetrating Radar (GPR) trace reflection amplitude. For this purpose, an extensive pavement survey was conducted using an air-coupled GPR system, operating at 1 GHz or alternatively with a 2 GHz central frequency. The collected data were analyzed comparatively for the two antennae. The variability of electric permittivity caused by variations in HMA material is discussed, while the effect of the different frequencies is compared on the ability to retrieve permittivity, in-situ density and moisture content of the compacted HMA material using relationships suggested in reviewed international literature. The main finding of the present research is that for the same type of HMA material, the assessment of the material properties appears to be independent from the two central frequencies of investigation. However, there is evidence concerning the variations between the GPR wave data for the two different frequencies. The research highlights that the increased penetration depth of the 1 GHz antenna can provide an increased identification of areas of potential moisture within the body of HMA layer, and suggests that the variations between the permittivity values for the two different frequencies could be used to assess the homogeneity of material density with depth as an indicator of the mixture compaction. Additional findings are included within the paper. 相似文献
5.
Ajoy Roy Choudhury 《Pure and Applied Geophysics》1970,80(1):137-146
Summary The propagation of disturbances in cylindrical surfaces of visco-elastic material of general linear type (i) cylinder surrounded by a vacuum (ii) and on an infinite body of same material having a cylindrical cavity, when the surface is subjected to an initially static magnetic field, making use of the electro-magnetic equations of Maxwell, equations of elasticity and the stress-strain relations of the material. 相似文献
6.
The one-dimensional (1D) problem of magma rising through a volcanic channel is identical in its statement to the problem of chemical-density or thermo-chemical convection in an unbounded medium. The present work demonstrates how the rise of a low-viscous, buoyant material through an ambient environment with significantly higher viscosity can be successively described as a 1D problem of viscous fluid dynamics. The suggested analytical model is applied to describe the upwelling of a less dense material in the tail of a diapir through the mantle to the Earth??s surface. The linear study of wave disturbances in the shape of the conduit shows that the buoyant material tends to uprise by portions, which probably accounts for the pulsed activity of the hotspots appearing on the surface above the diapir. 相似文献
7.
地震观测是了解地球内部物理状态的直接手段，通过一些弹性参数可以推测地球内部的物质构成，而相应的物质构成对分析大陆地壳演化的过程具有重要意义。泊松比是推测地球内部物质构成的有效参数之一，接收函数方法分离出的Ps转换波为获取泊松比提供了一条行之有效的便捷途径。 相似文献
8.
三峡工程运用后,长江中游荆江河段持续冲刷,床沙与推移质、悬移质泥沙不断交换,从而造成该河段床沙发生不同程度的调整,对长江中下游河床演变及非平衡输沙机理的研究具有重要影响.在新水沙条件下,总结分析了沙波运动特性及床沙交换方式,引入Markov三态转移概率及非均匀沙隐暴系数,得到基于状态转移概率的沙质河段床沙级配调整的计算模型.研究结果表明:(1)20092014年,沙市站年内床沙中值粒径有先增大后减小的趋势,而监利站年内床沙中值粒径则先减小后增大,且荆江河段年际床沙中值粒径总体呈上升趋势,粗化程度约为6.9%~9.3%;(2)20092014年,沙市站床沙组成中粒径d<0.062 mm的泥沙所占比重不变,0.062 mm≤d<0.25 mm的泥沙所占比重逐年减少(累计减少11.4%),d≥0.25 mm的泥沙所占比重逐年增加(累计增加11.4%),而监利站床沙组成均存在波动性变化;(3)荆江河段床沙转换为推移质的概率随着泥沙粒径的增大而增大,床沙转换为悬移质的概率随着泥沙粒径的增大而减小,而推移质和悬移质转换为床沙的概率均随着泥沙粒径的增大而增大,河床发生冲刷粗化时泥沙输移的主要形式为悬移质(概率为81%~87%),而淤积细化时床沙补给主要来源于推移质(概率为8%~12%).通过验证,本文概率模型的计算结果与实测资料符合较好,能够应用于长江中游沙质河段年际床沙粗化及年内床沙级配调整过程预报,为进一步开展三峡工程下游非均匀悬移质泥沙沿程恢复机理的研究提供理论基础. 相似文献
9.
10.
A coastal prediction system as an event response tool: Particle tracking simulation of an anhydrous ammonia spill in Tampa Bay 总被引：1，自引：0，他引：1
A coastal prediction system for Tampa Bay, comprised of a numerical circulation model and Lagrangian particle transport model, rapidly produces hindcast/forecast simulations that alert authorities to high impact areas following the introduction of hazardous material into the bay. The effectiveness of the prediction system as an event response tool is evaluated during an anhydrous ammonia spill. A week-long simulation predicts the trajectory of the material due to winds and currents. Physical transport of the model particles alternates from being tidally driven to being driven both by wind action and residual circulation. A forecast simulation showing particle distribution drove field sampling that resulted in the detection of a Pseudo-nitzschia bloom likely initiated from excess ammonium in the bay. An online component of the coastal prediction system is in development to better manage response and mitigation efforts for future hazardous material spills in Tampa Bay. 相似文献
11.
Anthony Foucher Sébastien Salvador‐Blanes Rosalie Vandromme Olivier Cerdan Marc Desmet 《水文研究》2017,31(6):1424-1437
The long‐term and current volumes of sediment exported from stream banks were calculated as potential sources of sediment in a large pond located at the catchment outlet of a small agricultural lowland basin strongly affected by anthropogenic pressure in France. Bank erosion was measured over a short period using a network of erosion pins along a small stream (1400 m long) to quantify the material exported during a single winter (2012–2013). The material exported by this same stream over the last 69 years was quantified using an original approach involving the comparison of a compilation of three‐dimensional historical stream redesign plans that date back to 1944 with the state of the banks in 2013 (differential global positioning system and LiDAR data). The results suggest that a global trend of material loss along the stream banks monitored by erosion pins, with an average erosion rate of 17.7 mm year?1 and an average volume of exported material of 75 t km?1. Over 69 years, this same stream exported an average of 36 t km?1 year?1, and the average loss of material from the banks throughout the whole catchment was estimated to be 14 t km?1 year?1. The contribution of bank material to the filling of the pond over the last 10 years is between 46% and 52% based on an extrapolation of erosion pin dynamics or between 27% and 30% based on the comparison of LiDAR data to the average historical profile extrapolated for the catchment. These results suggest that bank erosion represents a major source of sediment in degraded waters in traditionally understudied agricultural lowland catchments, where anthropogenic pressures are high. 相似文献
12.
J. F. Macqueen 《Advances in water resources》1980,3(4):165-172
The cooling water discharged from a power station may contain dissolved material, in addition to the heat rejected from the station turbines, which must be dispersed away from the power station in a manner which is environmentally acceptable. Mathematical methods are presented for use in the calculation of the rises in background concentration arising from the discharge of such material into lakes, rivers, estuaries or the sea. The calculations take account of factors including the replacement of the receiving water by freshwater, the available volume of water in the system, the rate at which the material may be degraded in the receiving water and some aspects of the design of the cooling water system. Particular calculations emphasize the different levels of concentration which may be expected from similar discharges into the different types of receiving water body. These examples suggest that for conditions representative of some present power station sites the concentration in a lake may be ten times that in an estuary, and that in an estuary may be ten times that in the sea. Of course, this is not a general result and the concentration level must be calculated for each particular case. The analyses also suggest what hydrographic factors must be measured during field surveys at a particular site if the mathematical methods presented here are to be used for the calculation of concentrations of any discharged material. 相似文献
13.
X射线工业CT是航空航天零部件失效分析的重要工具,CT可以获得被检材料高分辨率的空间分布图像,应用于非破坏观察零部件内部几何尺寸和材料状况。应用于失效分析的例子证明CT对于相应的分析工作是十分有益的。文章中采用的应用实例包括机电组件和材料的失效评价。 相似文献
14.
The nth-order moments of the electromagnetic impulse response are useful for interpreting electromagnetic data. We have derived an analytic expression for the half-order moment of a conductive half-space. By inverting this expression, the measured half-order moment can be used to estimate an apparent conductivity of the ground. The first-order moment can also be used to estimate the half-space conductivity. A sensitivity analysis indicates that for an airborne EM configuration, the half-order moment will be most sensitive to material in the top 26–48 m, while the first-order moment will be sensitive to deeper material (down to depths between 66 and 127 m). 相似文献
15.
A rigorous mathematical formulation is presented for the analysis of a thin cylindrical shell embedded in a transversely isotropic half-space under vertically incident P-wave excitation. By virtue of a set of ring-loads Green's functions for the shell and a group of dynamic fundamental solutions for the half-space under arbitrary interfacial dynamic loads, the problem is shown to be reducible to a pair of Fredholm integral equations. By utilizing an adaptive-gradient family capable of capturing regular-to-singular solution transitions smoothly, an accurate numerical procedure is developed. To assess the effect of material anisotropy on the dynamic load-transfer process, a set of comprehensive numerical results presented for various material and geometrical conditions. The accuracy of the proposed numerical scheme is confirmed by its comparison with a benchmark solution for the corresponding isotropic problem. 相似文献
16.
孔隙率是评价多孔材料相关性能的重要因素之一,是检测材料质量的一项重要指标.针对孔隙率值受分辨率影响较大的问题,在能谱与材质信息均未知的条件下,本文基于多能谱CT与(NC-POCS)非凸-凸集投影算法,结合非负矩阵求解方法,实现分解重建,以多孔材料泡沫铝为例,分析其在不同分辨率下的孔隙率变化情况.实验结果表明,本文提出的... 相似文献
17.
We investigated the potential of using a 24-electrode resistivity imaging apparatus for rapid reconnaissance surveys for natural-aggregate accumulation. The surveys were first calibrated at sites with known geometry of sand and gravel layers, which showed that subsurface accumulation of coarse material was accurately resolved with both 2- and 4-m electrode spacing. The inverted absolute resistivity of economically viable gravel deposits varied in the range of 300–1500 Ω m, depending on variation in ground-moisture levels. The exploration surveys were then conducted at seven sites where geomorphological analyses indicated a potential for gravel. Four of these sites, where subsurface resistivity did not exceed 30–40 Ω m, were found to have very little or no coarse material. The three remaining sites showed significant accumulations of high-resistivity material, two of which were subsequently augered for verification. The results of drilling demonstrated that resistivity images were an effective indicator of the presence of coarse material in the subsurface, allowing accurate determination of subsurface distribution and thickness of sand and gravel strata. The total volume of a deposit could easily be estimated from resistivity images. The absolute quality and economic value of the material, is, however, difficult to ascertain from resistivity images alone without drilling. 相似文献
18.
Basil Gomez 《地球表面变化过程与地形》1983,8(1):41-54
The quantitative bedload transport data that are presently available confirm that the generalized bedload transport rate-stream power relationship is applicable to natural streams. However, the bedload transport rate is not solely dependent upon hydraulic parameters, but also upon the inter-relationship between bed material characteristics and flow properties. Segregation of the surficial bed material, as expressed through the development of an armour coat, limits the availability of transportable material. Under such circumstances observed bedload transport rates are less than the predicted values. The effect which the development of an armoured surface has upon the bedload transport rate is described with reference to bedload and bed material sampling in the Borgne d'Arolla, Valais, Switzerland. The data refer to two periods when the resumption of baseflow conditions following flood events which were of a sufficient magnitude to transport all but the coarsest (0·3–0·5 m) particles on the streambed, provided the opportunity for the bed to adjust to a comparatively stable flow regime. Observed and predicted bedload transport rate-stream power relationships are compared. The theoretical relationship does not adequately describe conditions in some gravel-bed channels, since it fails to take into account the effect which armouring may have upon the supply of transportable material. 相似文献
19.
压电材料智能摩擦阻尼器对高耸钢塔结构风振反应的半主动控制 总被引：16，自引：3，他引：13
压电材料是一种新型智能材料。本文将压电材料和被动摩擦阻尼器相结合设计出一种新型智能摩擦阻尼器,并采用基于经典最优控制理论的半主动控制策略对高耸钢塔结构风振反应的控制进行了研究,对国内即将兴建的第一高钢电视塔──合肥翡翠电视塔进行了算例分析。为满足摩擦阻尼器对高耸钢塔结构风振控制的特殊需要、文中还建立了房耸钢塔结构的空间桁架有限元模型和串联多自由度体系模型,并在形成广义控制力作用位置矩阵和计算摩擦阻尼器两端的相对位移的过程中综合地运用了这两种力学模型。本文研究表明,压电材料智能摩擦阻尼器可以有效地抑制高耸钢塔结构的风振反应。 相似文献
20.
The paper is devoted to the modeling of processes of inelastic nonhydrostatic compaction and decompaction of low porosity geomaterials such that each pore can be considered as an isolated cavity in a solid matrix. A real material containing a large number of noninteracting pores is replaced at a microscopic level by an equivalent homogeneous medium containing a single pore inclusion. Attention is paid to the case where cylindrical pores oriented perpendicularly to an applied nonhydrostatic load are present in the material. Along with the elastoplastic response of the medium, viscous effects are considered. The effect of shear stresses on compaction and decompaction of porous geomaterials is studied. The dependence of effective material parameters on the properties of components is examined. 相似文献