共查询到19条相似文献，搜索用时 359 毫秒
1.
海底电缆(OBC)采集方式的出现,导致OBC采集与拖缆采集数据进行拼接成为三维连片地震资料处理中的一个重要环节.由于采集方式不同,数据在振幅、频率、相位等方面均存在较大差异.为了消除和减小这些差异,为后续的地质解释和油气预测提供便利,本文提出了一种在子波域的1范数匹配滤波方法来计算匹配滤波因子,以用来提高OBC数据和拖缆数据的匹配精度,改善连片处理的数据品质,为后续的地质解释和油气预测提供便利.通过实际资料检验,子波域匹配滤波方法在OBC与拖缆数据拼接应用中取得了较好的效果. 相似文献
2.
西湖凹陷深层致密砂岩储层具有良好的勘探开发前景,受埋深影响,目的层地震资料品质较差.A构造通过斜缆宽频采集和处理获取宽频地震数据,提升了资料品质,然而应用常规子波提取方法对宽频数据进行子波提取并反演计算纵波阻抗,结果与井上实测数值差异较大,影响储层的定量解释.针对这一问题,提出统计性子波和确定性子波相结合的长短子波合并宽频子波提取方法,提取的宽频子波比常规子波低频丰富、旁瓣小,能更真实地反映地震信息,约束稀疏脉冲反演的纵波阻抗结果与测井曲线吻合度更高.基于宽频数据和常规数据分别进行约束稀疏脉冲弹性波阻抗反演,预测A构造优质储层分布,经已钻井证实,宽频数据比常规数据储层预测精度高,预测的储层展布特征与研究区地质沉积认识一致.结果表明:这种基于宽频子波提取的宽频资料应用方法有效降低了致密砂岩储层预测的多解性. 相似文献
3.
4.
地震资料连片叠前深度偏移处理目前仍旧存在着区块间能量不均、频率差异、空面元、覆盖次数差异大、速度难以求准等突出问题.针对以上现状,本文采用振幅匹配及匹配滤波等技术,确保区块间振幅能量分布,解决频率差异,保证子波特征分布均匀,无闭合差存在;研究并采用了两步法数据规则化方法,即基于反假频傅里叶重构的空间内插和基于Voronoi多边形的振幅归一化技术,改善由于空面元和覆盖次数不均造成的偏移划弧现象.在此基础上,研究了叠前深度层析反演速度建模技术,解决连片速度问题,给出叠前深度偏移的速度体.将上述连片处理关键技术应用于实际资料后,偏移剖面无空间假频存在,成像效果明显提高,并在油田勘探中取得了显著的实际应用效果. 相似文献
5.
对以往三维地震勘探原始资料进行连片处理是目前煤矿采区地震勘探中正在兴起的新方向.连片处理中,由于地形起伏大,低速带速度和厚度纵横向变化剧烈,常规静校正存在着较大局限性.因此,如何拼接地震数据,达到理想的地质效果是关键.应用层析静校正对山西郑庄煤矿三个区块的三维地震勘探原始数据进行重新连片处理,区块之间实现无缝拼接,初至波光滑,煤层反射波连续性好.利用连片处理后的数据体对以往解释成果进行修改,收到令人满意的地质效果. 相似文献
6.
OBC近年来得到长足的发展,但采集新技术的出现,相应地要求处理技术的开发和研究必须跟进,跟上世界先进技术的进步,才能更好地为油气的勘探工作做出应有的贡献.目前在OBC采集、处理方面还存在如下问题:如何客观评价现有OBC观测系统的优劣,如何评价采集资料的质量,如何评价现有OBC资料处理模块的效果等.为此,本文收集了靶区地震地质资料,建立了从陆坡区到深水区的二维和三维地震地质模型,基于二维和三维波动方程正演模拟技术,模拟给定的OBC观测系统下的P波和P-SV波炮集记录,根据多波资料处理结果评价对应的OBC观测系统的采集资料的效果.结果显示,OBC接收的地震波场特征复杂,地震波类型很多,合成记录的纵横波分离得到的纵波剖面和转换波剖面特征明显.靶区给定的OBC观测系统正演模拟结果表明,给定的观测系统下,复杂断层能得到较好的偏移成像,但复杂基底尤其是凹陷部位,成像效果较差. 相似文献
7.
陕北富县地区以前的地震勘探沿沟布设弯曲测 线,平面展布呈不规则树枝状,难以形成闭合回 路,很难对二维地震资料在平面上进行储层反 演。2001年在陕北富县探区进行野外采集方法和 地震处理技术攻关,通过采用极其灵活的可变线 元观测系统实现直测线过塬,使测线成网连片; 资料处理中采用基于模型反演的折射波静校正、 地表一致性振幅补偿和反褶积、叠前噪音衰减等 技术,为后续的储层预测、低幅度构造解释和综 合地质研究提供了高保真的地震资料;由于测线 的连片成网,通过伪测井的方法对无井测线进行 控制,最终实现储层反演的连片解释。 相似文献
8.
9.
基于改进的小子域滤波的重力异常及重力梯度张量边缘增强(英文) 总被引：1，自引：0，他引：1
针对利用重磁资料增强地质体边界在图像中的视觉效果和提高地质解译的准确性问题,提出应用改进的小子域滤波方法对重力异常及重力梯度张量数据进行增强处理。根据滑动窗口子域平均选择原理,探讨了改进的小子域滤波方法在位场异常数据含有高斯白噪声时,不同窗口大小对地质体边界的识别效果及其在具有不同边界延伸方向地质体中的应用效果。模型试验结果表明,利用改进的小子域滤波对重力梯度张量数据进行增强处理,得到的地质体边界形态失真更小,且受滤波窗口大小、噪声以及地质体边界方向的影响较小;对深部场源体,通过增大滤波窗口的方式,可以较好地反映深部场源体的边界。结合黑龙江省虎林盆地重力异常以及计算的重力梯度张量的处理实例表明改进的小子域滤波法较传统的小子域滤波法增强了对断裂水平位置信息的识别。 相似文献
10.
《地球物理学进展》2015,(5)
地震数据伴随的随机噪声,降低了地震资料品质,制约着后续的应用.在压制随机噪声的同时有效保护地质体边缘信息是地震资料去噪处理中的难点.本文利用三维地震数据空间的构造信息,构建结构张量和扩散张量,控制不同方向的平滑程度,利用二阶导数在地质体边缘出现极大值的特性,辅助判断地震同相轴的终断位置,借助连续性因子强化层理方向的扩散平滑,抑制地质体边缘、断点及裂缝位置的平滑.在理论算法研究的基础上,本文实现了地震数据的三维各向异性扩散滤波技术,应用该技术对叠前CMP道集、地震属性沿层切片、三维叠后地震数据等进行了去噪处理.实际应用结果表明,滤波后的地震资料信噪比明显提高,非终断地震同相轴连续性增强,地质体边缘特征变得更明显,断层的断点更清楚,为后续的地震解释和储层反演提供了可靠资料. 相似文献
11.
Greater attention has been paid to vintage-merge processing of seismic data and extracting more valuable information by the geophysicist. A match filter is used within many important areas such as splicing seismic data, matching seismic data with different ages and sources, 4-D seismic monitoring, and so on. The traditional match filtering method is subject to many restrictions and is usually difficult to overcome the impact of noise. Based on the traditional match filter, we propose the wavelet domain L1 norm optimal matching filter. In this paper, two different types of seismic data are decomposed to the wavelet domain, different detailed effective information is extracted for L1-norm optimal matching, and ideal results are achieved. Based on the model test, we find that the L1 norm optimal matching filter attenuates the noise and the waveform, amplitude, and phase coherence of result signals are better than the conventional method. The field data test shows that, with our method, the seismic events in the filter results have better continuity which achieves the high precision seismic match requirements. 相似文献
12.
Luc T. Ikelle 《Geophysical Prospecting》1999,47(2):179-193
The current inverse scattering solution used for multiple attenuation of marine seismic reflection data assumes that sources and receivers are located in the water. To adapt this solution to the ocean-bottom cable (OBC) experiment where receivers are located on the sea-floor, we have proposed combining the conventional marine surface seismic reflection data (streamer data) with OBC data. The streamer data add to the OBC data some of the wave paths needed for multiple attenuation. This combination has allowed us to develop a multiple attenuation method for OBC data which does not require any knowledge of the subsurface and which takes into account all free-surface multiples, including receiver ghosts. A non-linear synthetic data example consisting of pressure and particle velocity fields is used to illustrate the procedure. 相似文献
13.
14.
断层和断裂带的有效识别是地震资料解释中的重要环节,断层在地震信号响应中以断面波的形式体现,因此断面波成像的质量关系到断层的精细识别与刻画.本文利用精度较高的交错网格有限差分正演模拟方法对断面波成像的影响因素进行了正演研究,主要正演分析的参数包括采集因素中的电缆长度和采集方向,地质因素中的断层倾角、断距、反射系数,以及处理因素中的偏移方法等几个方面.通过正演论证得出：采用合理的采集参数能够提高断面波的照明度;有效结合地质因素能够提高断面波的解释精度;利用合理的偏移方法能够使断层归位更加准确,断面波有效成像.基于以上结论,对于断面波的精确识别与刻画,应综合采集因素,处理因素及地质因素,只有这样才能提高断层的解释精度,有效减小解释误差. 相似文献
15.
Wide-angle multicomponent ocean-bottom cable (OBC) data should further enhance sub-basalt imaging by using both compressional and converted shear wavefields. The first step in analysing multicomponent OBC data is to decompose the recorded wavefields into pure P- and pure S-wavefields, and extract the upgoing P- and S-waves. This paper presents a new scheme to separate P- and S-wavefields from wide-angle multicomponent OBC data in the τ–p domain. By considering plane-wave components with a known horizontal slowness, the P- and S-wavefields are separated into the directions of observed P- and S-wave oscillations using the horizontal and vertical components of the data. The upgoing P- and S-waves are then extracted from the separated P- and S-wavefields. The parameters used in the separation are the seismic wave velocities and the density at the receiver location, which can be estimated from the first reflection phase observed on the horizontal and vertical components. Numerical tests on synthetic data for a plane-layered model show good performance and demonstrate the accuracy of the scheme. Separation of wavefields from a basalt model is performed using synthetic wide-angle multicomponent OBC data. The results show that both near-offset and wide-angle reflections and conversions from within and below basalt layers are enhanced and clearly identified on the separated wavefields. 相似文献
16.
不连续地质体（如断层）的自动检测一直以来都是叠后地震数据解释中的关键问题之一,尤其在三维情况中尤为重要.然而,大多数边缘检测和相干算法都对随机噪声很敏感,随机噪声衰减是叠后地震数据解释的另一个主要问题.针对构造保护去噪和断层检测问题,本文基于非平稳相似性系数完善一种构造导向滤波方法并且提出一种自动断层检测方法,形成了一套匹配的处理技术.该构造导向滤波既能够有效地衰减随机噪声又可以很好地保护地震资料中的断层等信息不被破坏,增强地震剖面中弯曲、倾斜同相轴的连续性.根据地震数据局部倾角走向,利用相邻道构建当前地震道的预测,通过预测道的叠加得到参考道,计算预测道与参考道之间的非平稳相似性系数可以设计出数据驱动的加权中值滤波.另一方面,预测道与原始道之间的非平稳相似性系数能够用于带有断层指示性的相干分析.这两种方法都基于构造预测和非平稳相似性系数,但是使用不同的调节参数和处理方案.理论模型和实际数据的处理结果证明了本文提出构造导向滤波和断层检测方法的有效性. 相似文献
17.
Remarkable progress has been made in electromagnetic (EM) techniques as applied to the petroleum industry in instruments,
data acquisition, and processing and interpretation in China. Included here is equipment, such as high-power Controlled Source
EM (CSEM) acquisition systems, acquisition methods, such as the three dimensional small-bin Continuous Electromagnetic Array
acquisition method, Time and Frequency Domain Controlled Source Electromagnetic, Borehole-to-surface Electromagnetic technique
and marine magnetotelluric method. Data processing methods, such as fast three dimensional inversion using nonlinear conjugate
gradients, and data interpretation methods, like Induced Polarization and Resistivity anomalies for hydrocarbon detection,
are also included. These new techniques have been applied in petroleum survey and many cases are in complicated areas. They
have successfully served the investigation of deep igneous rock reservoirs, and prediction of potential hydrocarbon targets.
The cases indicate that electromagnetic techniques can help seismic survey to effectively detect hydrocarbon reservoir and
remarkably improve drilling successes. 相似文献
18.
Changcheng Liu Deva Prasad Ghosh Ahmed Mohamed Ahmed Salim Weng Sum Chow 《Geophysical Prospecting》2019,67(1):140-149
Amplitude interpretation for hydrocarbon prediction is an important task in the oil and gas industry. Seismic amplitude is dominated by porosity, the volume of clay, pore-filled fluid type and lithology. A few seismic attributes are proposed to predict the existence of hydrocarbon. This paper proposes a new fluid factor by adding a correct item based on the J attribute. The algorithm is verified through stochastic Monte Carlo modelling that contains various rock physical properties of sand and shale. Both gas and oil responses are separated by the new fluid factor. Furthermore, an approach based on the neural network model is trained using the deep learning method to predict the new fluid factor. The confusion matrix shows that this model performs well. This model allows the application of the new fluid factor in the seismic data. In this study, the Marmousi II data set is used to examine the performance of the new fluid factor, and the result is good. Most hydrocarbon reservoirs are identified in the shale–sandstone sequences. The combination of deep learning and the new fluid factor provides a more accurate way for hydrocarbon prediction. 相似文献
19.
Yanling Shi Zhanxiang He Zuzhi Hu Qiang Wei Dechun Li Cuixian Meng Liansheng Ji Sheng Zhang 《Studia Geophysica et Geodaetica》2018,62(1):167-185
Mapping deep geological hydrocarbon targets is of significant importance in basin exploration. In areas lacking reliable seismic data, magnetotelluric (MT) and gravity explorations are helpful to delineate the distribution of potential deep geological hydrocarbon targets. Here we investigate the effectiveness of the integrated 3D MT and gravity explorations for mapping the potential deep hydrocarbon source rocks. The result based on the data from the W Basin (part of the Ordes Basin) of China demonstrates that the method is efficient and economical for basin exploration. The method is particularly useful in target areas which are of great interest for oil and gas exploration but lack high quality seismic data. In our method, we first use the high-precision 3D small-bin MT data acquisition to improve the data accuracy. Then we perform datum static correction method and apply 3D inversion to obtain the3D resistivity distribution. We also develop a layered resistivity model based on resistivity logging to assist the interpretation of the inverted 3D resistivity data so as to derive an initial 3D geological model. Starting from the initial model, we use 2D gravity data to update the model via 2D inversion line by line, and then pass the updated model for the next round of the 3D MT inversion. The integrated inversion is implemented iteratively so the model converges to satisfy the need of final geological analysis. The application to the W Basin shows that we could successfully delineate the geological distribution of the potential deep hydrocarbon source rocks within the basin and map the thickness of the upper Paleozoic. 相似文献