首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 546 毫秒
1.
Summary The structure of freedite, Pb8Cu(AsO3)2O3Cl5, [a = 13.578(2),b = 20.099(3),c = 7.465(1)Å; = 105.73(1)°; space group C2/m; Z = 4] was determined by direct methods and Fourier summations. The refinement of the atomic coordinates and thermal parameters-the metal atoms anisotropic, the remaining atoms isotropic-yielded anR value of 0.086 (R w = 0.061). The five crystallographically independent Pb atoms are each surrounded by three resp. four O atoms and four Cl atoms. The novel feature of this structure are formal [(AsO3)2(CuCl)2(AsO3)2] groups, in which the Cu atoms are tetrahedrally coordinated to two Cl and two As atoms [Cu-Cl = 2.43(8)Å2 × , Cu-As = 2.32(1)Å2 ×]. The mineral is considered to contain Cu(I) and As(III) atoms linked together by covalent Cu-As bonds. The formal groups mentioned are bound to the Pb atoms via Cl and O atoms.
Die Struktur des Freedits, Pb8Cu(AsO3)2O3Cl5
Zusammenfassung Die Struktur des Freedits, Pb8Cu(AsO3)2O3Cl5, [a = 13,578(2),b = 20,099(3),c = 7,465(1)Å; = 105,73(1); Raumgruppe C2/m;Z = 4] wurde anhand direkter Methoden und Fouriersummationen bestimmt. Die Verfeinerung der Ortskoordinaten und der Temperaturparameter - Metallatome anisotrop, übrige Atome isotrop -ergab einenR-Wert von 0,086 (R w = 0,061). Die fünf kristallographisch verschiedenen Pb-Atome werden von drei bzw. vier O-Atomen sowie jeweils vier Cl-Atomen umgeben. Ein neues Bauprinzip dieser Struktur sind formale [(AsO3)2(CuCl)2(AsO3)2]-Gruppen, in denen die Cu-Atome durch zwei Cl- und zwei As-Atome tetraedrisch umgeben sind [Cu-Cl= 2,43(8)Å2 ×, Cu-As = 2,32(1)Å2 x]. Es wird angenommen, daß in diesem Mineral Cu(I)- und As(III)-Atome vorliegen, die über kovalente Bindungen verknüpft sind. Diese formalen Gruppen sind über die Cl- und O-Atome an die Pb Atome gebunden.

With 2 Figures  相似文献   

2.
Plumboselite, ideally Pb3O2(SeO3), is a new selenite (IMA2010?C028) from the Tsumeb mine, Namibia. It occurs as fibres on clausthalite and is also associated with smithsonite, mimetite and vaterite. Plumboselite occurs in subparallel to divergent clusters of thin, flattened, colourless fibres up to 0.3?mm in length, but not exceeding 5???m in width and 2???m in thickness. The fibres are elongated parallel to [001] and flattened on {010}, with {010} the only form observed. The crystals have a dull to adamantine lustre and a white streak. The tenacity is brittle and the Mohs hardness is estimated to be between 2 and 3. Plumboselite crystals are optically biaxial with parallel extinction and are length fast in all orientations. The Gladstone-Dale relationship predicts n av?=?2.115. The high indices of refraction and small crystal size prevented the determination of other optical properties. The calculated density is 7.814?g/cm3. The empirical formula (based on 5 O atoms) is Pb2.92Ca0.01Se1.03O5. Plumboselite is orthorhombic, space group Cmc21, a?=?10.5384(11), b?=?10.7452(13), c?=?5.7577(7) ?, V?=?651.98(12) ?3 and Z?=?4. The five strongest lines in the powder X-ray diffraction pattern are [d obs in ?/(I)/hkl]: 3.155/(100)/221; 1.956/(26)/042,402; 2.886/(22)/311,002; 1.713/(21)/223; 2.691/(17)/040. The crystal structure was solved from single-crystal X-ray diffraction data and refined to R 1?=?0.0371 on the basis of 200 unique reflections with F o?>?4??F. The structure is based on double [O2Pb3] chains of edge-sharing oxo-centered [OPb4] tetrahedra along c, between which are sited SeO3 triangles. The two independent Pb2+ atoms and the Se4+ atom have sterochemically active lone electron pairs.  相似文献   

3.
The effect of composition and temperature on the relaxed adiabatic bulk modulus of melts in the P2O5-Al2O 3-Na2SiO3 system have been investigated in the temperature range of 1140 to 1450 °C using ultrasonic interferometric methods at frequencies of 3, 5 and 7 MHz. The density of these melts was determined using Pt-double-bob Archimedean densitometry techiques. P2O5 is known to dramatically affect the structure and the chemical and physical properties of granitic and pegmatitic melts as a function of the peralkalinity of the melt. The physical results of the structural changes occurring in Na2O-Al2O3-SiO2 melt upon the addition of P2O5 are observed by variations in the properties such as density and compressibility. For the present peralkaline melts, the bulk modulus and density decrease with addition of 15 mol% P2O5, and increase with the addition of 15 mol% Al2O3. The addition of P2O5 to the present melts results in a larger increase in melt compressibility than that observed with increasing polymerization between Na2SiO3 and Na2Si2O5 melts. This would suggest that not only is the polymerization of the melt increasing with the addition of P2O5 (Mysen et al. 1981; Nelson and Tallant 1984; Gan and Hess 1992), but that the tetrahedrally co-ordinated phosphorus complexes are influencing the bond lengths and energies within the melt structure; resulting in the structure becoming more compressible than expected, although incompressible (Vaughan and Weidner 1987) tetrahedral P2O5 polyhedra (Mysen et al. 1981; Gan and Hess 1992; Toplis et al. 1994) are being added to the melt structure.  相似文献   

4.
Editorial responsibility: J. Hoefs  相似文献   

5.
The stability of coexisting orthopyroxene, sillimanite and quartz and the composition of orthopyroxene in this assemblage has been determined in the system MgO-FeO-Fe2O3-Al2O3-SiO2-H2O as a function of pressure, mainly at 1,000° C, and at oxygen fugacities defined mostly by the hematite-magnetite buffer. The upper stability of the assemblage is terminated at 17 kbars, 1,000° C, by the reaction opx+Al-silicate gar+qz, proceeding toward lower pressures with increasing Fe/(Fe+Mg) ratio in the system. The lower stability is controlled by the reaction opx+sill+qz cord, which occurs at 11 kbars in the iron-free system but is lowered to 9 kbars with increasing Fe/(Fe+Mg). Spinel solid solutions are stabilized, besides quartz, up to 14 kbars in favour of garnet in the iron-rich part of the system (Fe/(Fe+Mg)0.30). Ferric-ferrous ratios in orthopyroxene are increasing with increasing ferro-magnesian ratio. At least part of the generally observed increase in Al content with Fe2+ in orthopyroxene is not due to an increased solubility of the MgAlAlSiO6 component but rather of a MgFe3+AlSiO6 component. The data permit an estimate of oxygen fugacity from the composition of orthopyroxene in coexistence with sillimanite and quartz.  相似文献   

6.
Boron-bearing kornerupine was synthesized in the simplest possible model system at fluid pressures and temperatures both within and outside the stability field of boron-free kornerupine. Best conditions for synthesis of single-phase products are 7 kb and 830 °C. Microprobe and wet chemical analyses as well as X-ray studies indicate compositional variations of kornerupines regarding all five constituent components: Increasing B-contents (from 0.37 to 3.32 wt% B2O3) are correlated with decreasing OH? values largely according to the Eq. B3+?3 H+; the ratio MgO∶Al2O3∶SiO2 varies from 4∶3∶4 in the direction towards 1∶1∶1. Thus kornerupine exhibits an at least ternary range of solid solution in the system studied. Crystallochemically speaking it is significant that, although the Mg∶Al∶Si ratio of kornerupine may remain constant with increasing boron contents, the total number of cations per formula unit increases beyond the ideal number of 14.0 as given by Moore and Bennett (1968). Considering the presence of an additional structural site at (000) it is suggested that the introduction of boron initiates a sequence of substitutions such as $$B^{[4]} \to Si^{[4] } \to A1^{[4]} \to Mg^{[6]} \to \square$$ . The filling of this site, empty in boron-free kornerupine, by Mg is connected with a loss of hydrogen located near this site. Petrologically speaking an exchange reaction relation exists between kornerupine and its coexisting fluid according to the equation Boron-free kornerupine+B2O3=boron-kornerupine+H2O. The molar fractions $$X_{B_2 O_3 } = B_2 O_3 /\left( {B_2 O_3 + H_2 O} \right)$$ of kornerupines exceed those of their coexisting fluids by about one order of magnitude. Fluids with relatively low XB 2 O 3 lead to the coexistence of kornerupine with boron-free minerals such as enstatite and sapphirine, fluids with relatively high XB 2 O 3 produce the boron-minerals grandidierite, sinhalite, and tourmaline (in the present system without Na!) in addition to kornerupine.  相似文献   

7.
New germanate analogs of the mineral surinamite, Mg3Al4BeSi3O16, have been synthesized with composition Mg4A4Ge3O16 (A=Al, Ga) and have been characterized by powder X-ray diffraction and transmission electron microscopy. The Al surinamite phase crystallizes with a primitive unit-cell (P2/n, a=10.153(1), b=11.708(2), c=9.920(1) Å, β=110.18 (2)° and Z=4) similar to that of the silicate mineral. The Ga surinamite-like phase crystallizes with a larger unit-cell (C2/c, a=10.308(2), b=23.690(5), c=10.057(l) Å, β=110.23 (2)° and Z=8). High-resolution electron microscopy has shown the common formation of intergrowths between the surinamite and sapphirine structures, illustrating the polysomatic structural relationship between them. Observations of disordered microstructures in the Al surinamite suggest the occurrence of a P2/n?C2/c transformation.  相似文献   

8.
Dumortierite, generally simplified as Al7BSi3O18, was synthesized in the pure system Al2O3–B2O3–SiO2–H2O (ABSH) using gels with variable Al/Si ratios mixed with H3BO3 and H2O in known proportions as starting materials. Synthesis conditions ranged from 3 to 5 and 15 to 20 kbar fluid pressure at 650° to 880°C. On the basis of analyses, synthetic dumortierite shows relatively narrow homogeneity ranges with regard to Al/Si which, however, vary as a function of pressure: at low pressures (3–5 kbar) Al/Si is 2.77–2.94 versus 2.33–2.55 at high pressures (15–20 kbar). Outside of these homogeneity limits, dumortierite was found to coexist with quartz or corundum, depending on the starting composition. Whereas synthetic dumortierite invaribly contains 1.0 boron atom per formula unit (p.f.u.) based on 18 oxygens, the water contents vary drastically as a function of pressure and temperature (1.32–2.30 wt.% H2O or 0.85–1.47 H p.f.u.). H2O is an essential component in dumortierite. Structural formulae based on complete chemical analyses of the dumortierites synthesized reveal that there is invariably an Si-deficiency against the ideal number of 3.0 p.f.u. In the calculation procedure used here, this deficiency is balanced by assuming tetrahedral Al. The remaining Al, taken to occupy the octahedral sites, is always below the ideal number of 7.0 p.f.u. Charge-balancing the structure with the hydrogen found analytically leads to two different mechanisms of H incorporation: (1) 3H+ + octahedral vacancy for Al[6]; (2) H+ + tetrahedral Al for Si[4]. Dumortierite synthesized at high fluid pressure contains little Al[4] and, thus, little H+ of type 2; its hydrogen is predominantly present as type 1. Conversely, dumortierite formed at low fluid pressures is high in Al[4] and hydrogen type 2. The amounts of hydrogen type 1 in low-pressure dumortierites decrease with rising temperatures of synthesis. Typical structural formulae are: (Al6.670.33)[Al0.49Si2.51–O13.53(OH)1.47](BO3) for a low-pressure product, and (Al6.680.32)[Al0.09Si2.91O13.94(OH)1.06](BO3) for a high-pressure product. Independently of the synthesis conditions, dumortierite was found always to be orthorhombic, with b0/a0 deviating slightly, but significantly from the valid for hexagonal lattice geometry. As a function of increasing Al/Si in the synthetic crystals, their a0, c0, and V0 rise, whereas b0 decreases. Thus b0/a0 decreases most sensitively with rising Al/Si and also with growing Al[4]. More experimentation is required before the compositional variations of dumortierite found here can be applied successfully to geothermobarometry of natural rocks.  相似文献   

9.
Summary. ?Ca-tourmaline has been synthesized hydrothermally in the presence of Ca(OH)2 and CaCl2-bearing solutions of different concentration at T = 300–700 °C at a constant fluid pressure of 200 MPa in the system CaO-MgO-Al2O3-SiO2-B2O3-H2O-HCl. Synthesis of tourmaline was possible at 400 °C, but only above 500 °C considerable amounts of tourmaline formed. Electron microprobe analysis and X-ray powder data indicate that the synthetic tourmalines are essentially solid solutions between oxy-uvite, CaMg3- Al6(Si6O18)(BO3)3(OH)3O, and oxy-Mg-foitite, □(MgAl2)Al6(Si6O18)(BO3)3(OH)3O. The amount of Ca ranges from 0.36 to 0.88 Ca pfu and increases with synthesis temperature as well as with bulk Ca-concentration in the starting mixture. No hydroxy-uvite, CaMg3(MgAl5)(Si6O18)(BO3)3(OH)3(OH), could be synthesized. All tourmalines have < 3 Mg and > 6 Al pfu. The Al/(Al + Mg)-ratio decreases from 0.80 to 0.70 with increasing Ca content. Al is coupled with Mg and Ca via the substitutions Al2□Mg−2Ca−1 and AlMg−1H−1. No single phase tourmaline could be synthesized. Anorthite ( + quartz in most runs) has been found coexisting with tourmaline. Other phases are chlorite, tremolite, enstatite or cordierite. Between solid and fluid, Ca is strongly fractionated into tourmaline ( + anorthite). The concentration ratio D = Ca(fluid)/Ca(tur) increases from 0.20 at 500 °C up to 0.31 at 700 °C. For the assemblage turmaline + anorthite + quartz + chlorite or tremolite or cordierite, the relationship between Ca content in tourmaline and in fluid with temperature can be described by the equation (whereby T = temperature in °C, Ca(tur) = amount of Ca on the X-site in tourmaline, Ca( fluid) = concentration of Ca2+ in the fluid in mol/l). The investigations may serve as a first guideline to evaluate the possibility to use tourmaline as an indicator for the fluid composition.
Zusammenfassung. ?Synthese von Ca-Turmelin im System CaO-MgO-Al 2 O 3 -SiO 2 -B 2 O 3 -H 2 O-HCl Im System CaO-MgO-Al2O3-SiO2-B2O3-H2O-HCl wurde Ca-Turmalin hydrothermal aus Ca(OH)2 and CaCl2-haltigen L?sungen bei T = 300–700 °C und einem konstanten Fluiddruck von 200 MPa synthetisiert. Die Synthese von Turmalin war m?glich ab 400 °C, aber nur oberhalb von 500 °C bildeten sich deutliche Mengen an Turmalin. Elektronenstrahl-Mikrosondenanalysen und R?ntgenpulveraufnahmen zeigen, da? Mischkristalle der Reihe Oxy-Uvit, CaMg3Al6(Si6O18)(BO3)3(OH)3O, und Oxy-Mg-Foitit, □(MgAl2)Al6(Si6O18)(BO3)3(OH)3O gebildet wurden. Der Anteil an Ca variiert zwischen 0.36 und 0.88 Ca pfu und nimmt mit zunehmender Synthesetemperatur und zunehmender Ca-Konzentration im System zu. Hydroxy-Uvit, CaMg3(MgAl5) (Si6O18)(BO3)3(OH)3(OH), konnte nicht synthetisiert werden. Alle Turmaline haben < 3 Mg und > 6 Al pfu. Dabei nimmt das Al/(Al + Mg)- Verh?ltnis mit zunehmendem Ca-Gehalt von 0.80 auf 0.70 ab. Al ist gekoppelt mit Mg und Ca über die Substitutionen Al2□Mg−2Ca−1 und AlMg−1H−1. Einphasiger Turmalin konnte nicht synthetisiert werden. Anorthit (+ Quarz in den meisten F?llen) koexistiert mit Turmalin. Andere Phasen sind Chlorit, Tremolit, Enstatit oder Cordierit. Ca zeigt eine deutliche Fraktionierung in den Festk?rpern Turmalin (+ Anorthit). Das Konzentrationsverh?ltnis D = Ca(fluid)/Ca(tur) nimmt von 0.20 bei 500 °C auf 0.31 bei 700 °C zu. Für die Paragenese Turmalin + Anorthit + Quarz mit Chlorit oder Tremolit oder Cordierit gilt folgende Beziehung zwischen Ca-Gehalt in Turmalin und Fluid und der Temperatur: (wobei T = Temperatur in °C, Ca(tur) = Anteil an Ca auf der X-Position in Turmalin, Ca(fluid) = Konzentration von Ca2+ im Fluid in mol/l). Die Untersuchungen dienen zur ersten Absch?tzung, ob Turmalin als Fluidindikator petrologisch nutzbar ist.

Received July 24, 1998;/revised version accepted October 21, 1999  相似文献   

10.
The structure of glasses and melts of Na2O· 0.5Fe2O3·3SiO2 and Na2O·FeO·3SiO2 compositions have been measured using high temperature Raman spectroscopy. For the oxidized sample it has been demonstrated that there is a close structural relationship between melt and glass. No coordination changes of Fe3+ with temperature and no new anionic species have been observed in the oxidized melt. The Raman spectra of the reduced sample clearly show a decrease in the degree of polymerization, as determined by the observation of the polarization character of the spectra and the details of the change of the Raman intensities during heating in hydrogen. Mössbauer spectra suggest that Fe3+ is tetrahedrally coordinated in the oxidized glass and part of the Fe2+ is tetrahedrally coordinated in the reduced glass.  相似文献   

11.
The system albite-celsian-water was investigated at isothermal sections of 670, 760, 800, 900, 1000 and 1100° C at 1 Kbar. At temperatures above about 950° C the existence of a solid solution series could be shown. In the condensed part of the 930° C/1 Kbar section the partition of barium between melt and coexisting crystals was measured using an electron probe microanalyzer. The barium content of crystals grown in equilibrium with a melt is always higher than the barium content of the starting composition, so albite-celsian shows an ascending type solid solution series at low total water pressures. In the subsolidus region two types of solvi are existent, which show different ways of phase unmixing. The relatively low barium contents of natural albites are interpreted as being due to geochemical reasons rather than crystalchemical reasons.

Meinem hochverehrten Lehrer, Herrn Prof. Dr. K. Jasmund, danke ich für sein lebhaftes Interesse während der Durchführung dieser Arbeit und für die kritische Durchsicht des Manuskripts. Mein Dank gilt ferner Herrn Dr. H. A. Seck für die Einarbeitung in die experimentellen Methoden der Hydrothermalsynthese und für kritische Anmerkungen zum Manuskript. Fräulein Dr. M. Corlett danke ich für wertvolle Informationen zur Messung mit der Elektronenstrahl-Mikrosonde.

Die Untersuchung wurde mit Hilfe von Personal- und Sachmitteln durchgeführt, die Herrn Professor Dr. K. Jasmund von der Deutschen Forschungsgemeinschaft zur Verfügung gestellt worden waren.  相似文献   

12.
  相似文献   

13.
 The crystal structure of MgFe2O4 was investigated by in situ X-ray diffraction at high pressure, using YAG laser annealing in a diamond anvil cell. Magnesioferrite undergoes a phase transformation at about 25 GPa, which leads to a CaMn2O4-type polymorph about 8% denser, as determined using Rietveld analysis. The consequences of the occurrence of this dense MgFe2O4 form on the high-pressure phase transformations in the (MgSi)0.75(FeIII)0.5O3 system were investigated. After laser annealing at about 20 GPa, we observe decomposition to two phases: stishovite and a spinel-derived structure with orthorhombic symmetry and probably intermediate composition between MgFe2O4 and Mg2SiO4. At pressures above 35 GPa, we observe recombination of these products to a single phase with Pbnm perovskite structure. We thus conclude for the formation of Mg3Fe2Si3O12 perovskite. Received: 27 March 2000 / Accepted: 1 October 2000  相似文献   

14.
Almandine, although decomposing in the presence of metallic iron into the anhydrous subsolidus assemblage fayalite + ferrocordierite + hercynite solid solution at low pressures, melts incongruently to hercynitess + quartz + liquid at 10 kb. At pressures between about 12 and 20 kb the products of incongruent melting are hercynitess + liquid only, and at still higher pressures almandine melts congruently. For the intermediate pressures between 2 and 10 kb not investigated a sequence of probable breakdown and melting relations involving the phases ferrocordierite, fayalite, hercynitess, quartz, and liquid is derived through Schreinemakers' analyses.The lower temperature stability limit of almandine in the presence of water at low oxygen fugacities and pressures of 15 to 20 kb lies between 550° and 600° C as at low pressures. It is marked, however, by the breakdown to a hydrous assemblage involving chloritoid and the new phase aluminous deerite. Since the anhydrous melting at these pressures occurs between 1300° and 1400° C, the thermal stability range of almandine increases drastically with pressure. Its upper breakdown limit shows in principle a similar behavior as those of other garnet end members.  相似文献   

15.
To further our knowledge of the effects of volatile components on phase relationships in aluminosilicate systems, we determined the vapor saturated solidi of albite, anorthite, and sanidine in the presence of CO2 vapor. The depression of the temperature of the solidus of albite by CO2 decreases from 30° C at 10 kbar, to 10° C at 20 kbar, to about 0 at 25 kbar, suggesting that the solubility of CO2 in NaAlSi3O8 liquid in equilibrium with solid albite decreases with increasing pressure and temperature. In contrast, CO2 lowers the temperature of the solidus of anorthite by 30° C at 14 kbar, and by 70dg C at 25 kbar. This contrasting behavior of albite and anorthite is also reflected in the behavior of melting in the absence of volatile components. Whereas albite melts congruently to a liquid of NaAl-Si3O8 composition to pressures of 35 kbar, anorthite melts congruently to only about 10 kbar and, at higher pressures, incongruently to corundum plus a liquid that is enriched in SiO2 and CaO and depleted in Al2O3 relative to CaAl2Si2O8.The tendency toward incongruent melting with increasing pressure in albite and anorthite produces an increase in the activity of SiO2 component in the liquid ( ). We predict that this increases the ratio of molecular CO2/CO 3 2– in these liquids, but the experimental results from other workers are mutually contradictory. Because of the positive dP/dT of the albite solidus and the negative dP/dT of the anorthite solidus, we propose that a negative temperature derivative of the solubility of molecular CO2 in plagioclase liquids may partly explain the decrease in solubility of carbon with increasing pressure in near-solidus NaAlSi3O8 liquids, which is in contrast to that in CaAl2Si2O8 liquid. Also, reaction of CO2 with NaAlSi3O8 liquid to form CO 3 2– that is complexed with Na+ must be accompanied by a change in Al3+ from network-former to network-modifier, as Na+ is no longer abailable to charge-balance Al3+ in a network-forming role. However, when anorthite melts incongruently to corundum plus a CaO-rich liquid, the complexing of CO 3 2– with the excess Ca2+ in the liquid does not require a change in the structural role of aluminum, and it may be more energetically favorable.The depression of the temperature of the solidus of sanidine resulting from the addition of CO2 increases from 50° C at 5 kbar to 170° C at 15 kbar. In marked contrast to the plagioclase feldspars, sanidine melts incongruently to leucite plus a SiO2-rich liquid up to the singular point at 15 kbar. Above this pressure, sanidine melts congruently, resulting in a decrease in the with increasing pressure in the interval up to 15 kbar. Above this pressure, the congruent melting of sanidine results in a lower and nearly constant relative to those of albite and anorthite, and CO2 produces a nearly constant freezing-point depression of about 170° C. Because of the low at pressures above the singular point, we infer that most of the carbon dissolves as CO 3 2– , resulting in a low CO2/ CO 3 2– , but a high total carbon content.The principles derived from the studies of phase equilibria in these chemically simple systems provide some information on the structural and thermal properties of magmas. We propose that the is an important parameter in controlling the speciation of carbon in these feldspathic liquids, but it certainly is not the only factor, and it may be relatively less significant in more complex compositions. In addition, our phase-equilibria approach does not provide direct thermal and structural information as do calorimetry and spectroscopy, but the latter have been used primarily on glasses (quenched liquids) and cannot be used in situ to derive direct information on liquids at elevated pressures, as can our method. Hopefully, the results of all of these approaches can be integrated to yield useful results.Institute of Geophysics and Planetary Physics, Contribution No. 2744  相似文献   

16.
The pressure-temperature-compositional (P-T-X) dependence ofthe solubility of Al2O3 in orthopyroxene coexisting with garnethas been experimentally determined in the P-T range 5–30kilobars and 800–1200 ?C in the system FeO—MgO—Al2O3—SiO2(FMAS). These results have been extended into the CaO—FeO—MgO—Al2O3—SiO2(CFMAS) system in a further set of experiments designed to determinethe effect of the calcium content of garnet on the Al2O3 contentsof coexisting orthopyroxene at near-constant Mg/(Mg + Fe). Startingmaterials were mainly glasses of differing Mg/(Mg + Fe) or Ca/(Ca+ Mg + Fe) values, seeded with garnet and orthopyroxene of knowncomposition, but mineral mixes were also used to demonstratereversible equilibrium. Experiments were performed in a piston-cylinderapparatus using a talc/pyrex medium. Measured orthopyroxene and corrected garnet compositions werefitted by multiple and stepwise regression techniques to anequilibrium relation in the FMAS system, yielding best-fit,model-dependent parameters Goy= –5436 + 2.45T cal mol–1,and WM1FeA1= –920 cal mol–1. The volume change ofreaction, Vo, the entropy change, So970 and the enthalpy changeHo1,970, were calculated from the MAS system data of Perkinset al. (1981) and available heat capacity data for the phases.Data from CFMAS experiments were fitted to an expanded equilibriumrelation to give an estimate of the term WgaCaMg = 1900 ? 400cal/mole cation, using the other parametric values already obtainedin FMAS. The experimental data allow the development of a arnet-orthopyroxenegeobarometer applicable in FMAS and CFMAS: where This geobarometer is applicable to both pelitic and metabasicgranulites containing garnet orthopyroxene, and to garnet peridoditeand garnet pyroxenite assemblages found as xenoliths in diatremesor in peridotite massifs. It is limited, however, by the necessityof an independent temperature estimate, by errors associatedwith analysis of low Al2O3 contents in orthopyroxenes in high-pressureor low-temperature parageneses, and by uncertainties in thecomposition of garnet in equilibrium with orthopyroxene. Ananalysis of errors associated with this formulation of the geobarometersuggests that it is subject to great uncertainty at low pressuresand for Fe-rich compositions. The results of application ofthis geobarometer to natural assemblages are presented in acompanion paper.  相似文献   

17.
Beginning of melting and subsolidus relationships in the system K2O-CaO-Al2O3-SiO2-H2O have been experimentally investigated at pressures up to 20 kbars. The equilibria discussed involve the phases anorthite, sanidine, zoisite, muscovite, quartz, kyanite, gas, and melt and two invariant points: Point [Ky] with the phases An, Or, Zo, Ms, Qz, Vapor, and Melt; point [Or] with An, Zo, Ms, Ky, Qz, Vapor, and Melt.The invariant point [Ky] at 675° C and 8.7 kbars marks the lowest solidus temperature of the system investigated. At pressures above this point the hydrated phases zoisite and muscovite are liquidus phases and the solidus temperatures increase with increasing pressure. At 20 kbars beginning of melting occurs at 740 °C. The solidus temperatures of the quinary system K2O-CaO-Al2O3-SiO2-H2O are almost 60° C (at 20 kbars) and 170° C (at 2kbars) below those of the limiting quaternary system CaO-Al2O3-SiO2-H2O.The maximum water pressure at which anorthite is stable is lowered from 14 to 8.7 kbars in the presence of sanidine. The stability limits of anorthite+ vapor and anorthite+sanidine+vapor at temperatures below 700° C are almost parallel and do not intersect. In the wide temperature — pressure range at pressures above the reaction An+Or+Vapor = Zo+Ms+Qz and temperatures below the melting curve of Zo+Ms+Ky+Qz+Vapor, the feldspar assemblage anorthite+sanidine is replaced by the hydrated phases zoisite and muscovite plus quartz. CaO-Al2O3-SiO2-H2O. Knowledge of the melting relationships involving the minerals zoisite and muscovite contributes to our understanding of the melting processes occuring in the deeper parts of the crust. Beginning of melting in granites and granodiorites depends on the composition of plagioclase. The solidus temperatures of all granites and granodiorites containing plagioclases of intermediate composition are higher than those of the Ca-free alkali feldspar granite system and below those of the Na-free system discussed in this paper.The investigated system also provides information about the width of the P-T field in which zoisite can be stable together with an Al2SiO5 polymorph plus quartz and in which zoisite plus muscovite and quartz can be formed at the expense of anorthite and potassium feldspar. Addition of sodium will shift the boundaries of these fields to higher pressures (at given temperatures), because the pressure stability of albite is almost 10kbars above that of anorthite. Assemblages with zoisite+muscovite or zoisite+kyanite are often considered to be products of secondary or retrograde reactions. The P-T range in which hydration of granitic compositions may occur in nature is of special interest. The present paper documents the highest temperatures at which this hydration can occur in the earth's crust.  相似文献   

18.
BERMAN  R. G. 《Journal of Petrology》1988,29(2):445-522
Internally consistent standard state thermodynamic data arepresented for 67 minerals in the system Na2O-K2O-CaO-MgO-FeO-Fe2O3-Al2O3-SiO2-TiO2-H2O-CO2.The method of mathematical programming was used to achieve consistencyof derived properties with phase equilibrium, calorimetric,and volumetric data, utilizing equations that account for thethermodynamic consequences of first and second order phase transitions,and temperature-dependent disorder. Tabulated properties arein good agreement with thermophysical data, as well as beingconsistent with the bulk of phase equilibrium data obtainedin solubility studies, weight change experiments, and reversalsinvolving both single and mixed volatile species. The reliabilityof the thermodynamic data set is documented by extensive comparisons(Figs. 4–45) between computed equilibria and phase equilibriumdata. The high degree of consistency obtained with these diverseexperimental data gives confidence that the refined thermodynamicproperties should allow accurate prediction of phase relationshipsamong stoichiometric minerals in complex chemical systems, andprovide a reasonable basis from which activity models for mineralsmay be derived.  相似文献   

19.
The system Ca2Al3Si3O11(O/OH)-Ca2Al2FeSi3O11(O/OH), with emphasis on the Al-rich portion, was investigated by synthesis experiments at 0.5 and 2.0 GPa, 500-800 °C, using the technique of producing overgrowths on natural seed crystals. Electron microprobe analyses of overgrowths up to >100 µm wide have located the phase transition from clinozoisite to zoisite as a function of P-T-Xps and a miscibility gap in the clinozoisite solid solution. The experiments confirm a narrow, steep zoisite-clinozoisite two-phase loop in T-Xps section. Maximum and minimum iron contents in coexisting zoisite and clinozoisite are given by Xpszo (max) = 1.9*10 - 4 T+ 3.1*10 - 2 P - 5.36*10 - 2{\rm X}_{{\rm ps}}^{{\rm zo}} {\rm (max) = 1}{\rm .9*10}^{ - 4} T{\rm + 3}{\rm .1*10}^{ - 2} P - {\rm 5}{\rm .36*10}^{ - 2} and Xpsczo (min) = (4.6 * 10 - 4 - 4 * 10 - 5 P)T + 3.82 * 10 - 2 P - 8.76 * 10 - 2{\rm X}_{{\rm ps}}^{{\rm czo}} {\rm (min)} = {\rm (4}{\rm .6} * {\rm 10}^{ - {\rm 4}} - 4 * {\rm 10}^{ - {\rm 5}} P{\rm )}T + {\rm 3}{\rm .82} * {\rm 10}^{ - {\rm 2}} P - {\rm 8}{\rm .76} * {\rm 10}^{ - {\rm 2}} (P in GPa, T in °C). The iron-free end member reaction clinozoisite = zoisite has equilibrium temperatures of 185ᇆ °C at 0.5 GPa and 0ᇆ °C at 2.0 GPa, with (Hr0=2.8ǃ.3 kJ/mol and (Sr0=4.5ǃ.4 J/mol2K. At 0.5 GPa, two clinozoisite modifications exist, which have compositions of clinozoisite I ~0.15 to 0.25 Xps and clinozoisite II >0.55 Xps. The upper thermal stability of clinozoisite I at 0.5 GPa lies slightly above 600 °C, whereas Fe-rich clinozoisite II is stable at 650 °C. The schematic phase relations between epidote minerals, grossular-andradite solid solutions and other phases in the system CaO-Al2O3-Fe2O3-SiO2-H2O are shown.  相似文献   

20.
Activity diagrams in the system KAlSi3O8-NaAlSi3O8-Al2SiO5-SiO2-H2O-HClhave been calculated in terms of aK+/aH+ and aN+/aH+ from existingexperimental data. They show the effect of temperature, pressure,and aH2O on the stability fields of the alkali feldspars, micas,and aluminium silicate. These activity diagrams are useful in revealing the bufferingcapacity of mineral assemblages and the chemical potential gradientsestablished by changes in T, P, aH2O, and mineral assemblage.An analysis of mineral paragenesis in terms of these diagramssuggests that mosaic equilibrium, allowing limited metasomatismand internal buffering of chemical potentials, best describemetamorphic systems. Thus the dehydration reaction: muscovite+quartz=K-feldspar+Al2SiO5+H2O which is most important in closed systems, probably fails todescribe in detail the mechanism of natural muscovite decomposition.Rather the decomposition of muscovite is more likely representedby ionic reactions. The replacement of muscovite by feldspar: muscovite+6 SiO2+2 K+=3 K-feldspar+2 H+ muscovite+6 SiO2+3 Na+=3 Albite+K++2 H+ is favored at high temperature and low pressure, and may accountfor the crystallization of some feldspars in metamorphic rocks.The reaction involving aluminium silicate replacement of muscovite: 2 muscovite+2 H+=3 Al2SiO5+3 SiO2+3 H2O+2 K+ is favored at high temperature and pressure and low aH2O, andcould contribute to the development of the aluminium silicates.It is concluded that both activity diagrams and AKNa projectionsshould be used together to more completely evaluate mineralparagenesis in terms of mosaic equilibria.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号