共查询到20条相似文献，搜索用时 781 毫秒
1.
Study of pore pressure variation during liquefaction using two constitutive models for sand 总被引：1，自引：0，他引：1
Numerical analyses of liquefiable sand are presented in this paper. Liquefaction phenomenon is an undrained response of saturated sandy soils when they are subjected to static or dynamic loads. A fully coupled dynamic computer code is developed to predict the liquefaction potential of a saturated sandy layer. Coupled dynamic field equations of extended Biot's theory with u–P formulation are used to determine the responses of pore fluid and soil skeleton. Generalized Newmark method is employed for integration in time. The soil behavior is modelled by two constitutive models; a critical state two-surface plasticity model, and a densification model. A class ‘B’ analysis of a centrifuge experiment is performed to simulate the dynamic response of level ground sites. The results of the numerical analyses demonstrate the capability of the critical sate two-surface plasticity model in producing pore pressures that are consistent with observations of the behavior of liquefiable sand in the centrifuge test. 相似文献
2.
In this paper, a novel coupled pore-scale model of pore-fluid interacting with discrete particles is presented for modeling liquefaction of saturated granular soil. A microscale idealization of the solid phase is achieved using the discrete element method (DEM) while the fluid phase is modeled at a pore-scale using the lattice Boltzmann method (LBM). The fluid forces applied on the particles are calculated based on the momentum exchange between the fluid and particles. The presented model is based on a first principles formulation in which pore-pressure develops due to actual changes in pore space as particles׳ rearrangement occurs during shaking. The proposed approach is used to model the response of a saturated soil deposit subjected to low and large amplitude seismic excitations. Results of conducted simulations show that at low amplitude shaking, the input motion propagates following the theory of wave propagation in elastic solids. The deposit response to the strong input motion indicates that liquefaction took place and it was due to reduction in void space during shaking that led to buildup in pore-fluid pressure. Soil liquefaction was associated with soil stiffness degradation and significant loss of interparticle contacts. Simulation results also indicate that the level of shaking-induced shear strains and associated volumetric strains play a major role in the onset of liquefaction and the rate of pore-pressure buildup. 相似文献
3.
A novel experimental method was designed to study the micro-behavior of saturated sand around a buried structure in centrifuge shaking table tests under strong simulated earthquake loading, in addition to the traditional macro-measurements. One free field test was first carried out as a reference, followed by one test with a deep buried structure and one with a shallowly buried structure. During the tests with the buried structure, high quality pictures of moving sand around the structure were recorded by a newly developed image acquisition system. By analyzing the interesting pictures at reasonable intervals using an image analysis software, the evolutions of microstructural features were obtained such as the orientations of the long axes of particles, the orientations of contact normals between particles and the average contact number of the interesting group of particles. The results showed that the evolutions of the micro-features were consistent with those of the macro-measurements such as excess pore pressures and accelerations, which help illuminate the mechanism of sand liquefaction. 相似文献
4.
Mahdi Taiebat Boris Jeremić Yannis F. Dafalias Amir M. Kaynia Zhao Cheng 《Soil Dynamics and Earthquake Engineering》2010
To predict the earthquake response of saturated porous media it is essential to correctly simulate the generation, redistribution, and dissipation of excess pore water pressure during and after earthquake shaking. To this end, a reliable numerical tool requires a dynamic, fully coupled formulation for solid–fluid interaction and a versatile constitutive model. Presented in this paper is a 3D finite element framework that has been developed and utilized for this purpose. The framework employs fully coupled dynamic field equations with a u–p–U formulation for simulation of pore fluid and solid skeleton interaction and a SANISAND constitutive model for response of solid skeleton. After a detailed verification and validation of the formulation and implementation of the developed numerical tool, it is employed in the seismic response of saturated porous media. The study includes examination of the mechanism of propagation of the earthquake-induced shear waves and liquefaction phenomenon in uniform and layered profiles of saturated sand deposits. 相似文献
5.
Three dynamic centrifuge model tests were conducted at an acceleration of 80g to simulate the seismic responses of level sand deposits: an intra-silt layer was embedded in two of these sand deposits at different depths. The effects of a low-permeability intra-silt layer on the build-up and dissipation of excess pore-water pressure, surface settlement, and the related liquefaction mechanism were investigated. An intra-silt layer modifies the seismic response of the sand deposit, reduces the extent of liquefaction, and thus decreases surface settlement. The depth of the intra-silt layer is one of the factors influencing the seismic responses of the sand deposits. The magnitude of the surface settlement is proportional to the degree of liquefaction in the sand deposit. The high positive hydraulic gradients appearing in both the intra-silt layer and in the sand deposit lying on the intra-silt layer can break a thinner or weaker top layer and result in sand boiling. Our visual animation of the ratio of the excess pore-water pressure and the lateral displacement revealed that the liquefaction front travels upward during shaking and the solidification front travels upward after shaking. 相似文献
6.
Parallel computing is a promising approach to alleviate the computational demand in conducting large-scale finite element analyses. This paper presents a numerical modeling approach for earthquake ground response and liquefaction using the parallel nonlinear finite element program, ParCYCLIC, designed for distributed-memory message-passing parallel computer systems. In ParCYCL1C, finite elements are employed within an incremental plasticity, coupled solid-fluid formulation. A constitutive model calibrated by physical tests represents the salient characteristics of sand liquefaction and associated accumulation of shear deformations. Key elements of the computational strategy employed in ParCYCL1C include the development of a parallel sparse direct solver, the deployment of an automatic domain decomposer, and the use of the Multilevel Nested Dissection algorithm for ordering of the finite element nodes. Simulation results of centrifuge test models using ParCYCLIC are presented. Performance results from grid models and geotechnical simulations show that ParCYCLIC is efficiently scalable to a large number of processors. 相似文献
7.
根据已经完成的液化侧向扩展场地-群桩基础-上部结构体系大型振动台试验,在有限元软件OpenSees中建立了可液化倾斜场地振动台试验的有限元模型。通过与试验结果对比,验证了数值模型的可靠性。基于此,建立了典型水平和倾斜液化场地-桩基-桥梁结构体系的数值模型,讨论了双向地震作用下水平和倾斜场地体系地震响应的差异,结果表明:相比水平场地,倾斜场地超孔隙水压力在峰值阶段波动幅度更大,土体的侧向位移增加明显,尤其是在饱和砂土中部位置;倾斜场地中桩基础的破坏程度更大,可液化层中部桩基曲率最大可增大约13倍,桩身水平位移显著增加;而水平场地桥墩曲率比倾斜场地桥墩曲率大,建议在液化场地桩基设计中应考虑场地倾斜带来的影响。 相似文献
8.
Shaking table tests were conducted on saturated clean Vietnam sand in the large biaxial laminar shear box (1880 mm×1880 mm×1520 mm) at the National Center for Research on Earthquake Engineering (NCREE), Taiwan. The settlement of sand specimens was measured and evaluated during and after each shaking test. Without liquefaction, the settlement of sand caused by shaking is very small. Significant volume changes occur only when there is liquefaction of sand. The volumetric strain of liquefied sand was calculated according to the measured settlement and the thickness of liquefied sand in the specimen. Relations between volumetric strain after liquefaction and the relative density of saturated clean sand were developed for various shaking durations and earthquake magnitudes. They are not affected by the shaking amplitude, frequency, and direction (one- or multidirectional shaking). 相似文献
9.
An effective stress method is presented for the analysis of liquefaction of ground including soil-structure interaction, based on an explicit-implicit finite element method. A simple constitutive model is developed to be incorporated in the effective stress method. The constitutive model consists of the Ramberg-Osgood model extended to two-dimensional problems and a new dilatancy model. The effectiveness of the constitutive model is examined with results of a simple shear test. Besides, the effective stress method is verified by comparing its numerical results with results of a shaking table test. It is found that the present method can simulate well the response of a saturated dense sand-structure system. The difference of the response computed by the effective stress method and the total stress method is discussed. It is found that the total stress method can simulate the response of the saturated sand within an accumulating excess pore water pressure of less than 70 per cent of the initial overburden stress. 相似文献
10.
Study on wall-type gravel drains as liquefaction countermeasure for underground structures 总被引：1，自引：0，他引：1
R. P. Orense I. Morimoto Y. Yamamoto T. Yumiyama H. Yamamoto K. Sugawara 《Soil Dynamics and Earthquake Engineering》2003,23(1):114
One of the most dramatic causes of damage to engineering structures during earthquakes has been the development of soil liquefaction beneath and around the structures. In order to dissipate the excess pore water pressures near structures, gravel drains are usually employed. In this study, the use of recycled concrete crushed stones as gravel drain materials is addressed. In order to investigate the performance of wall-type gravel drains, two series of shaking table tests were performed. The test results showed that gravel drains, when appropriate grain size distribution is considered, effectively dissipate the excess pore water pressure underneath the structure, and consequently reduce the magnitude of uplift. To supplement the laboratory tests, finite element analyses were also performed. For specified structure, ground and earthquake conditions, there is a critical width of gravel drain at which no uplift of structure will occur. The results of the model tests and the finite element analyses were then employed in developing design charts for determining the critical width of gravel drain to prevent buoyant rise of structure when the surrounding soil mass liquefies. 相似文献
11.
Compaction or densification of loose saturated soils has been the most popular method of reducing earthquake related liquefaction potential. Such compaction of a foundation soil is only economical when limited in extent, leading to a case of an ‘island’ of improved ground (surrounded by unimproved ground). The behavior of the densified sand surrounded by liquefied loose sand during and following earthquakes is of great importance in order to design the compacted area rationally and optimize both safety and economy. This problem is studied herein by means of dynamic centrifuge model tests. The results of three heavily-instrumented dynamic centrifuge tests on saturated models of side-by-side loose and dense sand profiles are discussed. The test results suggest the following concerns as relates to ‘islands’ of densified soil: (1) there is a potential strength degradation in the densified zone as a result of pore pressure increase due to migration of pore fluid into the island from the adjacent loose liquefied ground; (2) there is a potential for lateral deformation (sliding) within the densified island as the surrounding loose soil liquefies. 相似文献
12.
The dynamic response of a saturated layered soil deposit was modeled on the Princeton University geotechnical centrifuge using various centrifugal acceleration levels. The layered soil deposit consists of a saturated Nevada sand layer overlaid by a silt layer of low permeability. Measured acceleration and pore-water pressure time histories are used to validate the scaling laws used in interpreting dynamic centrifugal modeling test results. Careful measurements of the settlements at the silt surface are performed using a non-contact displacement transducer, and comparisons are made with measurements obtained with a standard linear voltage displacement transducer. Finally, the experimental results are used to verify the validity of the numerical procedures encompassed in the computer code DYNAFLOW. 相似文献
13.
针对振动台试验,采用u-p形式控制方程表述饱和砂土的动力属性,选用土的多屈服面塑性本构模型刻画饱和砂土和黏土的力学特性,引入非线性梁-柱单元模拟桩,建立试验受控条件下液化场地群桩-土强震相互作用分析的三维有限元模型,并通过试验结果验证数值建模途径与模拟方法的正确性。以实际工程中常用的2×2群桩为例,建立桩-土-桥梁结构强震反应分析三维有限元模型。基于此,针对不同群桩基础配置对液化场地群桩-土强震相互作用影响展开具体分析。对比发现,桩的数量相同时,桩排列方向与地震波输入方向平行时比垂直时桩基受力减小5%~10%,而对场地液化情况无明显影响;相同排列形式下,三桩模型中土体出现液化的时间约比双桩模型延缓5s,桩上弯矩和剪力减小33%~38%。由此可见,桩基数量增加,桩-土体系整体刚度更大,场地抗液化性能显著,桩基对上部桥梁结构的承载性能明显增强,其安全性与可靠性更高。这对实际桥梁工程抗震设计具有一定的借鉴意义。 相似文献
14.
Alexandros I. Valsamis George D. Bouckovalas Achilleas G. Papadimitriou 《Soil Dynamics and Earthquake Engineering》2010
This paper investigates the main parameters affecting the anticipated maximum surface displacements due to earthquake-induced lateral spreading of mildly sloping ground. The main tool used for this purpose is a numerical methodology employing a bounding surface plasticity model implemented in a finite difference code, which has been thoroughly validated against 16 published centrifuge lateral spreading experiments. This study shows that important problem parameters are the mean ground (surface) acceleration, the duration of strong shaking following the onset of liquefaction, the corrected SPT blowcount, the depth to the sliding plane, the inclination of the ground surface and the fines content of the liquefied soil layers. A new approximate multi-variable relation is proposed for the estimation of ground surface displacements due to lateral spreading in gently sloping ground, which includes the foregoing parameters. The form of the relation builds upon sliding block theory, but its final formulation is based on statistical analysis of the input data and the results from 120 parametric analyses performed with the validated numerical methodology. Comparison of the predictions of the proposed relation for ground surface displacement against pertinent field data (from 256 case histories) and centrifuge test measurements shows satisfactory accuracy. Furthermore, the variation of lateral displacements with depth is explored and distinct displacement patterns are proposed for uniform, 2-layer and 4-layer ground profiles. 相似文献
15.
Shake table test of soil-pile groups-bridge structure interaction in liquefiable ground 总被引：2，自引：1，他引：1
<正>This paper describes a shake table test study on the seismic response of low-cap pile groups and a bridge structure in liquefiable ground.The soil profile,contained in a large-scale laminar shear box,consisted of a horizontally saturated sand layer overlaid with a silty clay layer,with the simulated low-cap pile groups embedded.The container was excited in three E1 Centra earthquake events of different levels.Test results indicate that excessive pore pressure(EPP) during slight shaking only slightly accumulated,and the accumulation mainly occurred during strong shaking.The EPP was gradually enhanced as the amplitude and duration of the input acceleration increased.The acceleration response of the sand was remarkably influenced by soil liquefaction.As soil liquefaction occurred,the peak sand displacement gradually lagged behind the input acceleration;meanwhile,the sand displacement exhibited an increasing effect on the bending moment of the pile,and acceleration responses of the pile and the sand layer gradually changed from decreasing to increasing in the vertical direction from the bottom to the top.A jump variation of the bending moment on the pile was observed near the soil interface in all three input earthquake events.It is thought that the shake table tests could provide the groundwork for further seismic performance studies of low-cap pile groups used in bridges located on liquefiable groun. 相似文献
16.
基于振动台试验,设计制作2×2直群桩结构相似模型,通过输入一定峰值加速度的迁安波,对非液化砂土、300 mm厚饱和砂土和380 mm厚饱和砂土中群桩承台横向动力响应特性展开研究。研究结果表明:在迁安波输入下,非液化砂土中群桩承台加速度和位移时程与台面输入时程相比,其波形变化规律与峰值大小没有明显差异;而对于两种不同厚度饱和砂土中承台加速度放大较多,承台位移峰值较台面位移峰值相差不大。在300 mm饱和砂土中群桩承台加速度峰值较台面输入放大了约1.35倍,在380 mm饱和砂土中承台加速度峰值放大了1.42倍,说明在相同输入条件下,较厚的饱和砂土层在发生液化后群桩承台的动力响应更加显著。 相似文献
17.
18.
Two dynamic centrifuge model tests were performed to simulate dry or saturated sand deposits subjected to 1 Hz base shaking. This experimental study investigated the boundary effects of a laminar container on the seismic response acquired from accelerometers and from pore pressure transducers, both of which were embedded in the sand bed at various depths and distances from the end walls. Under the tested configurations and the employed input motion used in the study, the test results revealed minimal boundary effects on the seismic responses. The measured maximum amplitude, main frequencies, phase lags of acceleration, and the profiles of the calculated RMS acceleration amplification factor were not affected by the boundaries if the instruments were positioned at a distance of more than one-twentieth of the model length from the end walls and were not positioned on the ground surface. No obvious discrepancies were observed in the time histories of excess pore water pressure, measured at a distance of one-fourth of the model length from the end walls. These results infer that variations in the seismic response at the end walls were minimal; hence the laminar container used in the study may be used effectively to simulate 1D shear wave propagation in centrifuge shaking table tests. However, for other testing configurations, a similar study should be undertaken for evaluating the boundary effect of the laminar container on the seismic responses. 相似文献
19.
Lateral deformation of liquefiable soil is a cause of much damage during earthquakes, reportedly more than other forms of liquefaction-induced ground failures. Researchers have presented studies in which the liquefied soil is considered as viscous fluid. In this manner, the liquefied soil behaves as non-Newtonian fluid, whose viscosity decreases as the shear strain rate increases. The current study incorporates computational fluid dynamics to propose a simplified dynamic analysis for the liquefaction-induced lateral deformation of earth slopes. The numerical procedure involves a quasi-linear elastic model for small to moderate strains and a Bingham fluid model for large strain states during liquefaction. An iterative procedure is considered to estimate the strain-compatible shear stiffness of soil. The post-liquefaction residual strength of soil is considered as the initial Bingham viscosity. Performance of the numerical procedure is examined by using the results of centrifuge model and shaking table tests together with some field observations of lateral ground deformation. The results demonstrate that the proposed procedure predicts the time history of lateral ground deformation with a reasonable degree of precision. 相似文献
20.
Evolution of the shear wave velocity during shaking modeled in centrifuge shaking table tests 总被引：2，自引：1，他引：1
Chung-Jung Lee Chung-Ru Wang Yui-Chen Wei Wen-Yi Hung 《Bulletin of Earthquake Engineering》2012,10(2):401-420
Two in-flight shear wave velocity measurement systems were developed to perform the subsurface exploration of shear wave velocity
in a centrifuge model. The bender elements test and the pre-shaking test used in the study provided reliable and consistent
shear wave velocity profiles along the model depth before and after shaking in the centrifuge shaking table tests. In addition,
the use of the bender elements measurement system particularly developed here allowed continuous examination of the evolution
of shear wave velocity not only during and after the shaking periods in the small shaking events but also during the dissipation
period of excess pore water pressure after liquefaction in the large shaking events. The test results showed that the shear
wave velocity at different values of excess pore water pressure ratio varied as the effective mean stress to the power of
0.27, to a first approximation. Consequently, a relationship between the shear wave velocity evolution ratio and the excess
pore water pressure ratio is proposed to evaluate the changes in shear wave velocity due to excess pore water generation and
dissipation during shaking events. This relation will assist engineers in determining the shear stiffness reduction ratio
at various ru levels when a sand deposit is subjected to different levels of earthquake shaking. 相似文献