共查询到19条相似文献，搜索用时 171 毫秒
1.
2.
3.
大型船舶碰撞引起的海洋导管架平台结构损伤分析 总被引：5，自引：0，他引：5
主要对某一海洋导管架平台结构受到大吨位起重铺管船的碰撞进行了详细的非线性数值动力模拟。采用非线性弹簧来模拟受损构件的凹陷特性，计算分析了船舶侧向撞击导管架平台结构在不同的碰撞接触时间下的构件损伤情况，与实际结构损伤的检测结果相比较，反演计算分析了船舶以不同的速度与平台发生碰撞，得到了不同的碰撞接触时间和最大撞击力，以及导管架平台结构主要节点的应力、位移时间历程曲线，可以确定受到撞击后导管架平台结构构件和管节点的损伤程度，对提出合理可行的修理加固方案提供了理论依据。 相似文献
4.
浮托安装法,是相对于传统吊装法的一种新型海洋平台安装方法,具有起重能力大、作业周期短、安装费用低、适用范围广、操作安全方便等优点,解决了海上大型平台组块的安装问题。为了研究横荡护舷对浮托安装的影响,首先对海洋平台浮托安装中的护舷装置进行了介绍,然后针对某工程实例应用AQWA软件进行了数值模拟,并进行了模型验证。从时域方面对就位状态下的浮托模型进行了耦合动力分析,研究了横荡护舷参数对驳船运动和撞击力的影响规律。研究表明,横荡护舷可以有效地减小驳船运动和撞击力,其限位和缓冲作用与护舷尺寸及护舷刚度均有关。研究结果可为实际浮托安装工程提供重要的参考。 相似文献
5.
基于非线性有限元分析软件ANSYS/LS-DYNA建立海底悬空管道受坠物撞击的三维模型,考虑接触、摩擦和管土耦合作用,模拟海底悬空管道受坠物撞击的动态响应过程。通过大量的数值模拟,对比分析撞击能量、撞击角度以及坠物与管道间的摩擦对海底悬空管道受撞击部位凹陷损伤的影响。结果表明:管道受撞击部位的凹陷损伤随撞击能量的增大而变大;坠物撞击角度越大,管道受撞击部位的凹陷损伤越大;坠物与管道之间的摩擦使管道受撞击部位凹陷损伤略微增大,但影响很小。 相似文献
6.
桩腿耦合缓冲器在应用中主要起减小撞击力和限制上下结构相对位移的作用.在设计时,必须考虑到橡胶材料的大变形、橡胶-钢的接触和摩擦问题,它具有几何、材料和边界的三种非线性.通过结构非线性有限元软件ABAQUS/Explicit建立了桩腿耦合缓冲器的三维体单元模型,用基于中心差分法的准静态法,对其在水平和垂直两种工况下的准静力变形过程进行了数值仿真,从能量、接触、刚度与吸能以及应力应变等各方面对计算结果及其合理性进行了分析,并针对现有结构尺寸提出了改进建议.分析表明使用准静态分析方法是可行的,对桩腿耦合缓冲器的优化设计具有一定参考价值. 相似文献
7.
半潜浮式风机逐渐在深海风电开发中受到关注,建立风机、平台与系泊结构耦合数值计算模型,通过FAST与AQWA链接进行风机塔基荷载及平台运动响应相互耦合传递,基于随机波与极限波组合模型生成畸形波时程序列,进行半潜浮式风机系泊失效全过程时域模拟计算分析,得出系泊锚链张力、风机、塔筒和平台运动时程响应,探究系泊失效、风机停机和叶片变桨速率对浮式风机平台系泊结构动力响应的影响。结果表明：畸形波作用下浮式平台和系泊结构动力响应显著,系泊失效导致塔基剪力增加,平台纵荡和纵摇运动响应显著增大;风机停机会引起系泊锚链张力显著减小,转子推力、塔基剪力和叶尖挥舞位移响应逐渐衰减,平台纵荡、纵摇和横摇运动响应显著减小;随着叶片变桨速率增加,风机转子推力和塔基剪力波动幅值增大。 相似文献
8.
针对渤海湾某风电场的海上固定式风机支撑结构,采用适用于大直径单桩结构的PSI曲线模拟桩土相互作用,并采用SACS软件建立支撑结构的动力分析模型。首先对支撑结构进行模态分析;其次考虑海冰结构的随机振动作用模式,根据适用于渤海湾的随机冰力谱构造随机冰载荷时程曲线,基于半耦合的时域方法,采用SACS软件对支撑结构进行冰激振动分析,输出塔筒顶部加速度、单桩基底剪力及倾覆力矩等响应参数的时程曲线和响应功率谱;最后针对冰厚、冰速和海冰强度等海冰参数对支撑结构的冰激振动进行敏感性分析。研究结果表明,在随机振动模式下,冰载荷及结构动力响应对冰厚和海冰强度较为敏感,在进行冰激振动分析时应合理确定冰厚和海冰强度等参数。 相似文献
9.
导管架海洋平台结构静力弹塑性分析方法研究 总被引：1，自引：0，他引：1
以渤海一座导管架海洋平台为例,分别在两种不同的控制工况下采用静力弹塑性(Pushover)方法对其在地震作用中反应进行研究,采用能力谱法确定结构目标位移,同时进行结构在相同地震动下的弹塑性时程分析。通过比较Rushover分析方法及动力时程分析方法建立的结构能力曲线、节点位移、塑性铰分布等,证明了Pushover方法在导管架海洋平台结构抗震性能评价工作中是可行的。研究结果对实际工程中抗震性能决策有一定借鉴意义。 相似文献
10.
钢悬链线立管(SCR)在上部浮体运动和波流荷载激励下会与海床土相互作用,传统的线性海床模型假定荷载位移关系是线性的,没有考虑管土相互作用的非线性过程和海床土吸力的影响,本文基于大挠度柔性索理论的钢悬链式立管动力分析程序CABLE3D,将立管受到线性海床的弹性支撑力扩充为立管受到的海床垂向力,充分考虑管土非线性相互作用,并考虑海床土吸力对钢悬链式立管触地点区域的影响,开发出新的动力分析程序。程序采用非线性有限元方法对控制方程进行离散,时域内采用Newmark-β法,求解给定上部浮体运动条件下,SCR的动力响应,通过算例对线性刚度海床和非线性刚度海床进行对比,并分析了不同海床刚度对SCR触地点动力响应和疲劳损伤的影响。结果表明:非线性海床刚度模型比线性海床刚度模型更接近真实的管土作用过程;在非线性海床刚度模型下,海床土刚度越大,SCR触地点区域垂向位移响应越小,应力幅值越大,疲劳损伤越严重。 相似文献
11.
评估结构耐撞性能最可靠的方法是实尺度碰撞试验,然而对于大尺度结构物的碰撞试验,因其耗资巨大而不易开展,适当开展比例模型试验可以为简化解析算法及数值仿真计算提供验证依据,也可在一定程度上评估结构的耐撞性能。但是在进行碰撞模型试验时,材料应变率的敏感性会使得缩尺模型的动态响应与实尺度结构结果出现偏差,模型试验得到的数据与实际结构的动响应不完全遵循相似关系,这就限制了相似理论在大型结构物冲击问题上的应用。本文给出了一种通过改变冲击质量来修正应变率效应的方法,不同于传统量纲分析法中选取时间、质量和长度为基本量纲,而是以冲击质量、初始冲击速度和动态应力代替,得到计及应变率效应的质量相似关系。以此为基础,将该修正方法应用于船舶-自升式海洋平台的碰撞分析中。研究结果表明,该修正方法可以有效降低由于应变率效应而造成的缩尺误差,修正后的缩尺模型在碰撞冲击载荷下的位移、碰撞力和撞击时间等动态响应参数与实尺度模型结果的一致性更好。本文研究成果可以为大型结构物冲击模型试验设计提供技术支撑。 相似文献
12.
在工程设计中,通常采用模块化方式制造超大型浮式结构物,将巨大的单体结构分割成多个较小模块,后期通过合适的连接器拼装形成。为了明确多模块超大浮体在波浪作用下的水弹性响应,以两个相邻层合浮体（高刚度面板和低密度芯材）为研究对象,建立波浪作用下铰接层合浮体水弹性响应的高阶势流模型。采用匹配特征函数展开法求解流体运动的速度势,探讨了铰接处弹簧刚度对浮体的反射系数、透射系数、挠度、弯矩和剪力的影响规律。研究结果表明：迎浪侧浮体的存在可以有效降低背浪侧浮体的挠度、弯矩和剪力幅值;与垂直弹簧相比,扭转弹簧刚度的增加可以更加有效抑制铰接层合浮体的水弹性响应;当扭转弹簧刚度大于一定值时,继续增大弹簧刚度对浮体的动力响应不产生影响。 相似文献
13.
A method for analysis of the structural damage due to ship collisions is developed. The method is based on the idealized structural unit method (ISUM). Longitudinal/transverse webs which connect the outer and the inner hulls are modelled by rectangular plate units. The responses are determined by taking into account yielding, crushing, and rupture. Some plates of the outer and the inner shell subjected to large membrane tensions are modelled by membrane tension triangular/rectangular plate units, while the remaining shell panels are modelled by the usual plate units. The effect of stiffeners on the stiffness and the strength is considered as well. In order to include the coupling effects between local and global failure of the structure, the usual non-linear finite-element technique is applied. In order to deal with the gap and contact conditions between the striking and the struck ships, gap/contact elements are employed. Dynamic effects are considered by inclusion of the influence of strain-rate sensitivity in the material model. On the basis of the theory a computer program has been written. The procedure is verified by a comparison of experimental results obtained from test models of double-skin plated structures in collision/grounding situations with the present solutions. As an illustrative example the procedure has been used for analyses of a side collision of a double-hull tanker. Several factors affecting ship collision response, namely the collision speed and the scantlings/ arrangements of strength members, are discussed. 相似文献
14.
以浮式两级缓冲防撞系统为研究对象,介绍其工作原理,利用动力学分析软件LS-DYNA构建了碰撞模型并进行了仿真计算,依据仿真结果完成了以阻尼索组与浮体结构构型为主要内容的防撞系统设计。研究确定了阻尼索组的布置位置、材料及数量,为浮体内部结构构型设计了7种比选方案,分别对5 000 t船舶撞击浮体前梁和侧梁的动态过程进行了仿真分析,对比了不同方案及不同板梁厚度下的接触力。研究结果表明:浮体内部构造若选用板梁厚度12 mm的方案6设计,则碰撞发生时浮体前梁和侧梁分别可以稳定地提供10.4 MN和7.9 MN的均值力,以及11.5 MN和8.9 MN的峰值力,设计浮体能够满足整体刚度要求,防撞系统符合双保护原则。防撞系统及浮体结构构型设计为下一步全面开展船舶撞击防撞系统后的动力学响应分析奠定了基础。 相似文献
15.
Ice loads on a ship hull affect the safety of the hull structure and the ship maneuvering performance in ice-covered regions. A discrete element method （DEM） is used to simulate the interaction between drifting ice floes and a moving ship. The pancake ice floes are modelled with three-dimensional （3-D） dilated disk elements considering the buoyancy, drag force and additional mass induced by the current. The ship hull is modelled with 3D disks with overlaps. Ice loads on the ship hull are determined through the contact detection between ice floe element and ship hull element and the contact force calculation. The influences of different ice conditions （current velocities and directions, ice thicknesses, concentrations and ice floe sizes） and ship speeds are also examined on the dynamic ice force. The simulated results are compared qualitatively well with the existing field data and other numerical results. This work can be helpful in the shil3 structure design and the navigation securitv in ice-covered fields. 相似文献
16.
Based on the Winkler hypothesis, a model for analysis of the flexural response of an ocean trestle embedded in layered soil to horizontal impact of a moving mass is developed. By use of the transfer matrix in time domain, one can calculate the flexural dynamic response of a single pile. Then, by use of the boundary conditions of piles at the pile top, the dynamic response of the structure is analyzed. By use of the model proposed in this paper, the interactive force between the moving mass and the structure can be computed based on Work' s kinetic energy theorem and Newton iterative method. Thus the approach does not have to assume the interactive force, while the traditional method have to. The approach more accords with the engineering practice than the traditional method and it is convenient for engineering design. 相似文献
17.
针对船舶与中空夹层钢管混凝土（CFDST）导管架平台碰撞问题,利用ABAQUS/Explicit非线性有限元软件建立中空夹层钢管混凝土导管腿导管架数值模型,对船舶碰撞进行数值模拟,对比分析1 m/s、2 m/s和3 m/s的3种碰撞速度下工况下导管架抗碰撞性能、耗能及损伤。从碰撞力、碰撞区域变形以及导管架能量耗散等方面详细研究中空夹层钢管混凝土导管腿作用下导管架整体的损伤模式和动力响应。结果表明：CFDST导管架在船舶碰撞荷载作用下主要由CFDST导管腿耗能,有效控制了结构整体位移变形,提升了整体刚度,有效发挥平台各构件之间组合耗能,结构抗碰撞能力得到明显提升。 相似文献
18.
The importance of hydroelastic analysis of large and flexible container ships of today is pointed out. A methodology for investigation of this challenging phenomenon is drawn up and a mathematical model is worked out. It includes definition of ship geometry, mass distribution, structure stiffness, and combines ship hydrostatics, hydrodynamics, wave load, ship motion and vibrations. Based on the presented theory, a computer program is developed and applied for hydroelastic analysis of a flexible segmented barge for which model test results of motion and distortion in waves have been available. A correlation analysis of numerical simulation and measured response shows quite good agreement of the transfer functions for heave, pitch, roll, vertical and horizontal bending and torsion. The tool checked in such a way can be further used for reliable hydroelastic analysis of ship-like structures. 相似文献
19.
A Collision Tolerant Pile Structure (CTPS) for deploying navigation aids was developed having the ability to sustain collision by barge traffic. The CTPS concept consists of the aid itself mounted at the top of a pile which is hinged at the mudline. The hinge is omnidirectional, possesses complete downwards articulation, and provides a restoring moment to return the structure to the vertical position.To serve as a design tool, mathematical models were developed for stimulating pile dynamics during operating, hurricane and collision conditions. Using preliminary modeling results, a hinge component consisting of a central universal joint, peripheral stay arrangement was selected. A design based on this concept was developed, and a physical scale (1/15) model was built for testing.Initial experiments were conducted out of water to evaluate hinge stiffness characteristics, then uniform current tests were conducted at the Coast Guard Academy's circulating water channel. Results from both experiments indicate that the CTPS has enough stiffness to remain sufficiently vertical while acted upon by current, wind and wave loadings. Collision experiments carried out at the UNH indoor pool showed that the pile can endure barge collisions. A final computer model simulation predicted that the full-scale CTPS design presented here should meet the design requirements. 相似文献