共查询到20条相似文献，搜索用时 15 毫秒
1.
Seismic energy dissipation under variable amplitude loading for rectangular RC members in flexure 
下载免费PDF全文
下载免费PDF全文 《地震工程与结构动力学》2018,47(4):831-853
The energy dissipation characteristics of reinforced concrete members that exhibit both strength and stiffness deterioration under imposed displacement reversals were investigated. To do this, 24 symmetrically reinforced concrete rectangular specimens were tested under stable variable and random variable amplitude inelastic displacement cycles. Stable variable amplitude tests were employed to determine the low‐cycle fatigue behavior of specimens where the loading sequence was the major variable. A 2‐parameter fatigue model was developed in order to express the variation of the dissipated energy in displacement cycles with the cumulative hysteretic energy. This model was then used to predict the energy dissipation of test specimens subjected to random variable amplitude displacement cycles simulating severe seismic excitations. It has been demonstrated that the remaining energy dissipation capacity for the next displacement cycle was dependent on the relative relationship between the maximal displacement cycle and the energy dissipated along the completed displacement path. The plastic energy dissipation capacity of reinforced concrete members is both displacement path dependent and cumulative hysteretic energy dependent. 相似文献
2.
The low‐cycle fatigue model presented in the companion paper is employed for developing hysteresis and damage models for deteriorating systems. The hysteresis model performs strength reduction at a current displacement cycle by evaluating the loss in the energy dissipation capacity along the completed displacement path. Hence it is completely memory dependent. Pinching is accounted for implicitly by a reduced energy dissipation capacity in a displacement cycle. The model predicts the experimental results obtained from variable‐amplitude tests reasonably well. Response analysis under earthquake excitations reveals that both the maximum displacements and the number of large‐amplitude displacement response cycles increase significantly with the reduction in energy dissipation capacity, resulting in higher damage. Damage is defined as the deterioration in the effective stiffness of a displacement cycle, which is in turn related to the reduction in the energy dissipation capacity. A simple damage function is developed accordingly, consisting of displacement and fatigue components. It is observed that the fatigue component of damage is more significant than the displacement component for deteriorating systems under ground motions with significant effective durations. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
3.
Experimental evidence supporting the fact that results from quasi‐static (QS) test of low‐rise reinforced concrete walls may be safely assumed as a lower limit of strength and displacement, and energy dissipation capacities are still scarce. The aim of this paper is to compare the seismic performance of 12 reinforced concrete walls for low‐rise housing: six prototype walls tested under QS‐cyclic loading and six models tested under shaking table excitations. Variables studied were wall geometry, type of concrete, web steel ratio, type of web reinforcement and testing method. Comparison of results from dynamic and QS‐cyclic tests indicated that stiffness and strength properties were dependent on the loading rate, the strength mechanisms associated with the failure mode, the low‐cycle fatigue, and the cumulative parameters, such as displacement demand and energy dissipated. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
4.
A. Benavent‐Climent 《地震工程与结构动力学》2007,36(8):1049-1064
This paper proposes a new model for quantifying the damage in structural steel components subjected to randomly applied flexural/shear stress reversals, such those induced by earthquakes. In contrast to existing approaches that consider the damage as a combination of the global amount of dissipated energy and maximum displacement, the proposed model represents the damage by two parameters: (a) the total dissipated energy and (b) the portion of the energy consumed in the skeleton part of the load–displacement curve. These parameters are employed to define a single ‘damage index’, which measures the level between 0 (no damage) and 1 (failure). The proposed model takes into account that the ultimate energy dissipation capacity of the steel component is path‐dependent and can change throughout the entire response duration. The new model is derived from low‐cycle fatigue static tests of round steel rods and steel plates subjected to bending and shear. The accuracy of the model is verified experimentally through dynamic real‐time shaking table tests. From these tests, it is observed that the proposed model measures the level of damage at any stage of the loading process reasonably well and predicts the failure of the structural component accurately. The model can be easily implemented in a computer program to assess the level of seismic damage and the closeness to failure in new structures or to evaluate the safety of existing ones. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
5.
In order to enhance the durability of high‐performance buckling‐restrained braces (BRBs) used in bridge engineering, which are expected to withstand severe earthquakes three times without being replaced, aluminum alloys were employed to manufacture BRBs. A series of low‐cycle fatigue tests, including 18 specimens, were conducted to address the low‐cycle fatigue strength of the aluminum alloy BRB. Test results of all specimens show that stable hysteretic curves were obtained without overall buckling occurrence. Failure mode of the welded aluminum alloy BRB is obviously affected by the ribs' welding under the variable or constant strain amplitude condition. Therefore, another type of aluminum alloy BRB, the bolt‐assembled BRB with or without spot‐welded stoppers, is proposed and tested. Results showed that the low‐cycle fatigue performance of bolt‐assembled BRBs with stoppers improved four to five times compared with welded BRBs. However, the stoppers' spot welding has an adverse effect on the failure mode because the crack, which induced the specimen's failure, initiated from the spot weld toes of the stoppers. Both bolt‐assembled BRBs with and without stoppers can meet the cumulative inelastic deformation requirement proposed for high‐performance BRBs under the constant strain amplitude, not larger than 2%. In addition, under the variable strain amplitude condition, only the bolt‐assembled BRB without stoppers has an excellent cumulative inelastic deformation capacity and sustains two cycles of 2.5% strain amplitude. Finally, recommended Manson–Coffin equations and preliminary cumulative damage formulae for welded and bolt‐assembled BRBs are given as the references of the strain‐based damage evaluation. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
6.
Julian Carrillo 《地震工程与结构动力学》2015,44(6):831-848
Widely used damage indices, such as ductility and drift ratios, do not account for the influences of the duration of strong shaking, the cumulative inelastic deformation or energy dissipation in structures. In addition, the formulation and application of most damage indices have until now been based primarily on flexural modes of failure. However, evidence from earthquakes suggests that shear failure or combined shear‐flexure behavior is responsible for a large proportion of failures. Empirical considerations have been made in this paper for evaluating structural damage of low‐rise RC walls under earthquake ground motions by means of a new energy‐based low‐cycle fatigue damage index. The proposed empirical damage index is based on the results of an experimental program that comprised six shake table tests of RC solid walls and walls with openings; results of six companion walls tested under QS‐cyclic loading were used for comparison purposes. Variables studied were the wall geometry, type of concrete, web shear steel ratio, type of web shear reinforcement, and testing method. The index correlates the stiffness degradation and the destructiveness of the earthquake in terms of the duration and intensity of the ground motions. The stiffness degradation model considers simultaneously the increment of damage associated to the low‐cycle fatigue, energy dissipation, and the cumulative cyclic parameters, such as displacement demand and hysteretic energy dissipated. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
7.
为研究远场长周期地震动作用下SRC柱的抗震性能,对5个不同含钢率和配箍率的SRC柱进行同级位移循环加载10次的拟静力试验,分析其抗震性能指标。结果表明:同级位移循环次数对SRC柱抗震性能的影响与循环位移幅值有关。位移角不大于1/50时,同级位移循环次数对SRC柱的裂缝发展、承载力退化和耗能能力的影响均很小;位移角1/40时,随着位移循环次数的增加,SRC柱的裂缝不断发展,角部混凝土逐渐掉落,承载力退化幅度开始加大,耗能能力逐渐增强,损伤程度增长较快;位移角1/33时,同级位移多次循环导致SRC柱的损伤急剧发展,承载力快速降低,耗能能力明显增强,破坏程度显著加重。提高含钢率和配箍率均可以改善SRC柱的抗震性能。 相似文献
8.
Praveen K. Malhotra 《地震工程与结构动力学》2002,31(7):1441-1457
The seismic response spectrum defines the amplitude of the load, but it does not specify the number of cycles for which the load must be resisted by the structure. The amplitude by itself is not sufficient to evaluate the seismic resistance of a structure, because the structure's strength, stiffness and energy‐dissipation capacity reduce with an increase in the number of load cycles. This paper presents a cyclic‐demand spectrum, which, in conjunction with the amplitude spectrum, provides a more complete definition of the seismic load, hence a way to consider the degradation in strength, stiffness and energy‐dissipation capacity in a rational manner. Similarly to three amplitude parameters (peak ground acceleration, peak ground velocity, and peak ground displacement), three cyclic‐demand parameters are introduced for stiff, moderately stiff, and flexible systems. A design example is presented to illustrate the use of the cyclic‐demand spectrum. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
9.
Geoffrey W. Rodgers Kevin M. Solberg J. Geoffrey Chase John B. Mander Brendon A. Bradley Rajesh P. Dhakal Luoman Li 《地震工程与结构动力学》2008,37(13):1549-1564
Ductile‐jointed connections, which generally require some form of supplementary energy dissipation to alleviate displacement response, typically employ mild steel energy dissipation devices. These devices run the risk of low‐cycle fatigue, are effective only for peak cycles that exceed prior displacements, are prone to buckling, and may require replacement following an earthquake. This study presents an experimental investigation employing an alternative to mild steel: a high force‐to‐volume (HF2V) class of damper‐based energy dissipation devices. Tests are performed on a near full‐scale beam–column joint subassembly utilizing externally mounted compact HF2V devices. Two configurations are considered: an exterior joint with two seismic beams and one gravity beam framing into a central column, and a corner joint with only one seismic beam and one gravity beam framing into a column. Quasi‐static tests are performed to column drifts up to 4%. The experiments validate the efficacy of the HF2V device concept, demonstrating good hysteretic energy dissipation, and minimal residual device force, allowing ready re‐centring of the joint. The devices dissipate energy consistently on every cycle without the deterioration observed in the yielding steel bar type of devices. The effectiveness of the HF2V devices on structural hysteretic behavior is noted to be sensitive to the relative stiffness of the anchoring elements, indicating that better efficiency would be obtained in an embedded design. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
10.
A new smooth hysteretic model for ductile flexural‐dominated reinforced concrete bridge columns 下载免费PDF全文
下载免费PDF全文 A new smooth hysteretic model is proposed for ductile, flexural‐dominated reinforced concrete bridge columns. Four columns designed per modern seismic codes were tested using monotonically increasing and variable‐amplitude cyclic loading protocols and ground motion loading to develop the model. Based on the test results, hysteretic rules for damage accumulation and path dependence of reloading were constructed. For damage accumulation, unloading stiffness degradation is correlated with the maximum displacement and hysteretic energy dissipation, while reloading stiffness degradation is set equal to the unloading stiffness degradation. Pinching severity is related to the residual displacement in the direction opposite to the loading direction. Strength deterioration is correlated with the damage index and does not occur until the damage index reaches a threshold, after which the deterioration is proportional to the increase of the damage index. For path dependence of reloading, reloading paths are classified into primary paths and associate paths. The primary paths are those that start from a residual displacement that is equal to or larger than the previous maximum one. The associate paths are those that do not belong to primary paths and tend to be directed towards certain points. Reloading without load reversal is assumed to be linear. Comparison with the results of pseudo‐dynamic tests using three consecutive ground motions showed that the proposed model closely matched the test results. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
11.
黏弹性阻尼器是一种典型的被动控制装置,它可以通过黏弹性材料的剪切滞回耗能起到提高结构阻尼和减小结构地震或风振响应的作用。自主研发了损失系数不小于0.5的黏弹性材料,并基于此材料研发了新型国产黏弹性阻尼器。通过对黏弹性阻尼器足尺试件进行不同应变幅值、加载频率工况下的基本力学性能试验、以及低周疲劳性能试验,研究了不同工况下新型黏弹性阻尼器力学参数及其变化规律。试验结果表明:新型黏弹性阻尼器的损失系数在多数工况下处于0.3~0.4之间;其基本力学性能与加载频率相关性较小,随着应变幅值的增加表现出一定程度的软化特征,但在各应变幅值下均具有稳定的耗能能力;新型黏弹性阻尼器有良好的变形能力,在150%的应变下能保持稳定的基本力学性能,应变350%时仍未破坏;新型黏弹性阻尼器的疲劳性能较好,经低周疲劳加载后各项基本力学指标变化率均不超过25%。 相似文献
12.
It is not common to purposely subject the web of wide‐flange or I‐sections to out‐of‐plane bending. However, yielding the web under this loading condition can be a stable source of energy dissipation as the transition at the corner from the web to the flanges is smooth and weld‐free; this prevents stress concentrations causing premature failure and eliminates uncertainties and imperfections associated with welding. Further, short segments of wide‐flange or I‐sections constitute a simple and inexpensive energy dissipating device as minimum manufacturing is required and leftovers not useful for other structural purposes can be re‐utilized. This paper proposes a new type of seismic damper in the form of braces based on yielding the web of short length segments of wide‐flange or I‐shaped steel sections under out‐of‐plane bending. The hysteretic behavior and ultimate energy dissipation capacity is investigated via component tests under cyclic loads. The experimental results indicate that the damping device has stable restoring force characteristics and a high energy dissipation capacity. Based on these results, a simple hysteretic model for predicting the load–displacement curve of the seismic damper is proposed, along with a procedure for predicting its ultimate energy dissipation capacity and anticipating its failure under arbitrarily applied cyclic loads. The procedure considers the influence of the loading path on the ultimate energy dissipation capacity. Finally, shaking table tests on half‐scale structures are conducted to further verify the feasibility and effectiveness of the new damper, and to assess the accuracy of the hysteretic model and the procedure for predicting its failure. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
13.
Dynamic instability of clays: an energy approach 总被引：1，自引：0，他引：1
The dynamic instability of any soil is based on the ability to accumulate from cycle to cycle a part of the energy to be dissipated. Using the general thermodynamic approach in combination with high resolution experiments it is possible to analyze the transformations of energy in soil under dynamic loading. Undisturbed specimens of two Norwegian clays, sufficiently different in their engineering properties, were used in a number of undrained cyclic triaxial tests to study the influence of confining stress, coefficient of earth pressure at rest (K0), dynamic stress amplitude and frequency of loading in the development of instability in the clays. This paper discusses the unit dissipated energy and the unit activation energy as possible energy criteria for evaluation of dynamic instability in soils. 相似文献
14.
15.
The residual capability of a damaged structure to resist further load is essential in optimal seismic design and post-earthquake strengthening. An experimental study on the hysteretic characteristics of prestressed concrete frame beams under different loading histories was performed to explore the influence of load history on energy dissipation and failure characteristics of the member. Based on the test results, the failure of the beam is def ined, and the relationship between the failure moment under cyclic load and from the skeleton curve is formulated. Finally, based on displacement and energy dissipation, a model for prestressed concrete beam damage-failure evaluation is developed. In this model, the effect of deformation level, cumulative dissipated energy, and loading history on prestressed concrete beam damage–failure is incorporated, thus it is applicable to stochastic earthquake forces. 相似文献
16.
在已完成的包括16个构件的等位移循环加载钢筋混凝土柱的系列试验中，通过在其中3根柱的塑性铰区沿混凝土受力方向安设位移计，较准确测定了混凝土测试标距内的平均应变在一个加载循环内的变化规律及其随周数增长的变化规律；发现了单周最大压应变随周数的增长而持续增大，单周最大名义拉应变随周数增长而持续减小的重要现象；并与柱顶水平力-水平位移滞回规律实测结果相对应，结合截面受力特征对所得单周和多周应变变化规律的成因作了分析。 相似文献
17.
通过14根铰支焊接工字形支撑在不同特征的循环轴向位移荷载下的低周疲劳试验，研究了循环轴向位移荷载的位移幅值、平均位移幅值及加载次序等因素对钢支撑低周疲劳及耗能性能的影响。研究发现，对称循环荷载中幅值越小，支撑翼缘局部屈曲发展越晚，其耗能及承载力退化也越平缓。文中提出了支撑在幅值6δ≤Δδ≤12δy的对称循环荷载下的疲劳寿命经验公式。试验表明，循环荷载的位移幅值是支撑疲劳损伤及耗能退化的最主要影响因素，过载峰效应及适当的平均压位移幅值改善了钢支撑低周疲劳及耗能性能。 相似文献
18.
Systematic development of a new hysteretic damper based on torsional yielding: part II—experimental phase 下载免费PDF全文
下载免费PDF全文 This paper reports on experimental studies carried out on a 200 kN, 120 mm‐capacity prototype of the newly developed multidirectional torsional hysteretic damper for seismic protection of structures. The main goal of the experiments is to test the validity of the theory developed in a companion paper and to evaluate the low‐cycle fatigue performance of the energy dissipaters of the damper. Because the design and configuration of the damper allow easy replacement of the energy dissipaters, four sets of energy dissipaters were produced out of S355J2 + N, C45 (two sets), and 42CrMo4 + QT steel grades. Force–displacement response of the multidirectional torsional hysteretic damper is studied through fully reversed cyclic quasi‐static displacement‐controlled tests that were carried out in compliance with EN 15129. Following the verification tests, with the aim of studying fatigue and fracture behavior of the cylindrical energy dissipaters of the device, certain numbers of them were subjected to further cyclic tests up to failure, and observations on their fatigue/fracture behavior are reported. The experimental verification test results proved the validity of the developed theory and component design assumptions presented in a companion paper. Furthermore, the energy dissipaters exhibited excellent torsional low‐cycle fatigue performance with number of cycles to failure reaching 118 at a maximum shear strain of 8% for S355J2 + N steel grade. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
19.
Y. H. Chai 《地震工程与结构动力学》2005,34(1):83-96
Seismic performance of structures is related to the damage inflicted on the structure by the earthquake, which means that formulation of performance‐based design is inherently coupled with damage assessment of the structure. Although the potential for cumulative damage during a long‐duration earthquake is generally recognized, most design codes do not explicitly take into account the damage potential of such events. In this paper, the classical low‐cycle fatigue model commonly used for seismic damage assessment is cast in a framework suitable for incorporating cumulative damage into seismic design. The model, in conjunction with a seismic input energy spectrum, may be used to establish an energy‐based seismic design. In order to ensure satisfactory performance in a structure, the cyclic plastic strain energy capacity of the structure is designed to be larger than or equal to the portion of seismic input energy contributing to cumulative damage. The resulting design spectrum, which depends on the duration of the ground motion, indicates that the lateral strength of the structure must be increased in order to compensate for the increased damage due to an increased number of inelastic cycles that occur in a long‐duration ground motion. Examples of duration‐dependent inelastic design spectra are developed using parameters currently available for the low‐cycle fatigue model. The resulting spectra are also compared with spectra developed using a different cumulative damage model. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
20.
Design and full‐scale experimental evaluation of a seismically endurant steel buckling‐restrained brace system 下载免费PDF全文
下载免费PDF全文 This paper presents the results of 12 full‐scale tests on buckling‐restrained brace (BRB) specimens. A simple‐to‐fabricate all‐steel encasing joined by high‐strength bolts was used as the buckling‐restrainer mechanism. Steel BRBs offer significant energy dissipation capability through nondeteriorating inelastic response of an internal ductile core. However, seismic performance of BRBs is characterized by interaction between several factors. In this experimental study, the effects of core‐restrainer interfacial condition, gap size, loading history, bolt spacing, and restraining capacity are evaluated. A simple hinge detail is introduced at the brace ends to reduce the flexural demand on the framing components. Tested specimens with bare steel contact surfaces exhibited satisfactory performance under the American Institute of Steel Construction qualification test protocol. The BRBs with friction‐control self‐adhesive polymer liners and a graphite‐based dry lubricant displayed larger cumulative inelastic ductility under large‐amplitude cyclic loading, exceeding current code minimum requirements. The BRB system is also examined under repeated fast‐rate seismic deformation history. This system showed significant ductility capacity and remarkable endurance under dynamic loading. Furthermore, performance is qualified under long‐duration loading history from subduction zone's megathrust type of earthquake. Predictable and stable performance of the proposed hinge detail was confirmed by the test results. Internally imposed normal thrust on the restrainer is measured using series of instrumented bolts. Weak‐ and strong‐axis buckling responses of the core are examined. Higher post‐yield stiffness was achieved when the latter governed, which could be advantageous to the overall seismic response of braced frames incorporating BRBs. 相似文献