首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Applicability of spectral analysis to determine hydraulic diffusivity   总被引：1，自引：1，他引：0  
This study is to evaluate the applicability of estimating the one-dimensional horizontal hydraulic diffusivity of an unconfined aquifer with time-dependent fluctuation of lateral head and vertical recharge boundaries using observed water level spectra. Different models of boundary condition are imposed to evaluate the statistical significance between the calculated hydraulic diffusivity (ξ′) with the given hydraulic diffusivity (ξ). The auto-spectra of the water level in observation wells tapping the same aquifer are closely related to those at the disturbed boundaries. For an aquifer with a constant hydraulic diffusivity, the water level fluctuation in the monitoring wells is linearly related to the water level spectra observed at the boundaries. The spectral density function of aquifer hydraulic head varies inversely with specific yield (S y) and directly with recharge. Given small variation in water level spectra at the disturbed boundaries, the water level fluctuation in the aquifer is affected by the recharge condition and the aquifer spectral density function is sensitive to S y. Using an iterative technique to estimate ξ from 1400 sets of given parameters, 99% of the ξ′/ξ values deviated within only one order of magnitude with the model length (L) being equal to 1 km and 10 km. For L equal to 100 m, approximately 82% of the ξ′/ξ population falls within two orders of magnitude. Therefore, spectral analysis of aquifer hydraulic head response can be used to estimate the hydraulic diffusivity of an unconfined aquifer which is affected by periodic variations in recharge and head at boundaries.  相似文献   

2.
The hydraulic diffusivity gives a measure of diffusion speed of pressure disturbances in groundwater system; large values of hydraulic diffusivity lead to fast propagation of signals in aquifer. This research provides a novel design and derives spectral representation to determine hydraulic diffusivity using spectral analysis of groundwater levels coupled with time-dependent boundary adjacent to marine system and no flow boundary in aquifer system. To validate the proposed method, water levels of fluctuated boundary and groundwater well in a sandy confined aquifer were collected. The hydraulic diffusivity is then obtained by an inverse process in the non-linear complex form of spectral relationship. The method essentially is constructed on the conceptual design of natural forcing transmitted in large aquifer. It is unlike the conventional field pumping test which is only used to determine hydraulic properties of groundwater in small range around the well. Hydraulic diffusivity of the confined aquifer is determined using real observation and then checked by comparing to the published range. It suggests that without local aquifer test to estimate hydraulic diffusivity in a coastal aquifer using spectral representation with its relevant flow system and boundary has become feasible.  相似文献   

3.
A field tracer test was carried out in a light nonaqueous phase liquid (LNAPL) source zone using a well pattern consisting of one injection well surrounded by four extraction wells (5‐spot well pattern). Multilevel sampling was carried out in two observation wells located inside the test cell characterized by heterogeneous lithology. Tracer breakthrough curves showed relatively uniform flow within soil layers. A numerical flow and solute transport model was calibrated on hydraulic heads and tracer breakthrough curves. The model was used to estimate an average accessible porosity of 0.115 for the swept zone and an average longitudinal dispersivity of 0.55 m. The model was further used to optimize the relative effects of viscous forces versus capillary forces under realistic imposed hydraulic gradients and to establish optimal surfactant solution properties. Maximum capillary number (NCa) values between injection and extraction wells were obtained for an injection flow rate of 16 L/min, a total extraction flow rate of 20 L/min, and a surfactant solution with a viscosity of 0.005 Pa?s. The unconfined nature of the aquifer limited further flow rate or viscosity increases that would have led to unrealistic hydraulic gradients. An NCa range of 3.8 × 10?4 to 7.6 × 10?3 was obtained depending on the magnitude of the simulated LNAPL‐water interfacial tension reduction. Finally, surfactant and chase water slug sizing was optimized with a radial form of the simplified Ogata‐Banks analytical solution (Ogata and Banks 1961) so that injected concentrations could be maintained in the entire 5‐spot cell.  相似文献   

4.
Determination of hydraulic diffusivity of aquifers by spectral analysis   总被引：1，自引：1，他引：0  
This study uses the cyclical frequency to develop the mathematical relationship between hydraulic diffusivity and spectral density functions calculated from groundwater level variation. Such relationship can be applied to (1) unsteady state, one-dimensional confined aquifer with time-dependent water level on both end boundaries, and (2) linearized unconfined aquifer with or without vertical recharge. The spectral density functions of groundwater fluctuations are largely affected by the spectral density functions obtained from time-dependent end boundaries and their cross-spectral density functions. Hydraulic diffusivity of an aquifer can be solved by type-curve matching technique at a specified frequency band under the conditions of (1) confined aquifer having equal time-dependent boundaries on both ends, (2) unconfined aquifer having equal time-dependent boundaries on both ends with surface recharge, and (3) unconfined aquifer subjected to surface recharge but neglecting the water table fluctuations on both end boundaries.  相似文献   

5.
This paper presents a new modelling approach to quantify the hydraulic diffusivity of low-permeability unconsolidated porous media under confined saturated-flow conditions in the laboratory. The derived analytical solution for the transient variation of the hydraulic head after flow interruption was applied to experimental data obtained from continuous measurements of the water pressure at two locations in the soil column. Three soil samples made of a mixture of natural bentonite (at different mass fractions) and medium sand were studied during a series of stepwise constant flow rates of water. The numerical results well fit the experimentally measured decrease of the dimensionless hydraulic head. The study shows that the increase of the mass fraction of bentonite in the soil sample from 10 to 30% is accompanied by a strong decrease of the hydraulic diffusivity from 2.4 × 10−2 to 1.1 × 10−3 m2 s−1, which is clearly due to the decrease of the hydraulic conductivity of the soil sample. The specific storages obtained for each of the three samples are in the same order of magnitude and seem to decrease with the increase of mass fraction of bentonite. However, they clearly reflect the predominant portion of the compressibility of the porous medium compared with that of water. Compared with reported literature values for clayey soils, the specific storage values in this study are slightly higher, varying within the range of 2 × 10−3 to 8.1 × 10−3 m−1.. The experimental results also give insight into the limitations of the modelling approach. In the case of low-permeability soils (K < 2 × 10−6 ms−1) and steady-flow conditions with low Reynolds numbers, for example, Re < 0.003, it is recommended to choose a time duration for flow interruption between subsequent flow rate steps of longer than 5 s. For high-permeability porous media, to increase the precision of the quantified hydraulic diffusivity, it might be useful to select a measuring frequency significantly higher than 1 Hz.  相似文献   

6.
The hydraulic properties of aquitards are not easily obtained because monitoring wells are usually installed in aquifers for groundwater resources management. Earthquake‐induced crust stress (strain) triggers groundwater level variations over a short period of time in a large area. These groundwater anomalies can be used to investigate aquifer systems. This study uses a poroelastic model to fit the postseismic variations of groundwater level triggered by the Chi‐Chi earthquake to evaluate the hydraulic properties of aquitards in the Jhoushuei River alluvial fan (JRAF), Taiwan. Six of the adopted eight wells with depths of 70 to 130 m showed good agreement with the recovery theory. The mean hydraulic conductivities (K) of the aquifers for the eight wells are 1.62 × 10?4 to 9.06 × 10?4 m/s, and the thicknesses are 18.8 to 46.1 m. The thicknesses of the aquitards are 11.3 to 42.0 m. Under the isotropic assumption for K, the estimated values of K for the aquitards are 3.0 × 10?8 to 2.1 × 10?6 m/s, corresponding to a silty medium. The results match the values obtained for the geological material of the drilling core and those reported in previous studies. The estimated values were combined with those given in previous studies to determine the distribution of K in the first two aquitards in the JRAF. The distribution patterns of the aquitards reflect the sedimentary environments and fit the geological material. The proposed technique can be used to evaluate the K value of aquitards using inverse methods. The inversion results can be used in hydrogeological analyses, contaminant modeling, and subsidence evaluation.  相似文献   

7.
Laterite soils are widespread in tropical Africa and have a large impact on the hydrology of the areas they cover. The permeability of laterite helps determine the partitioning of runoff and interflow and regulates groundwater recharge to underlying bedrock. Groundwater within laterite also forms a widespread source of drinking water, typically from unimproved hang‐dug‐wells. Despite its importance, there is little published information on laterite aquifer properties. In this study, data from a 6 m deep well in Nigeria have been analysed to characterise the hydraulic conductivity of the laterite from repeated pumping tests. Transmissivity measurements from 40 tests spread out across a hydrological year varied from 0.1 to 1000 m2/d. Further interpretation of the data demonstrate a strong non‐linear decrease in horizontal hydraulic conductivity with depth, characterised by an upper horizon of extreme permeability (400 m/d), and a much lower permeability profile beneath (<0.1 m/d). These data are substantiated with observations from other wells throughout the area. This non‐linear permeability structure has several implications: the upper laterite can facilitate rapid lateral throughflow in the wet season, enabling contaminants to be transported significant distances (up to 1 km); natural groundwater levels are restricted to a narrow range for much of the year; and, in the dry season, the lower permeability of the deeper laterite restricts the amount of water which can be abstracted from shallow wells, leading to well failure. The work highlights the need for a wider study to better understand laterite soils and the role they play in regional hydrology. © 2013 Natural Environment Research Council. Hydrological Processes published by John Wiley & Sons Ltd.  相似文献   

8.
Artificially enhancing recharge rate into groundwater aquifer at specially designed facilities is an attractive option for increasing the storage capacity of potable water in arid and semi‐arid region such as Damascus basin (Syria). Two dug wells (I and II) for water injection and 24 wells for water extraction are available in Mazraha station for artificial recharge experiment. Chemical and stable isotopes (δ2H and δ18O) were used to evaluate artificial recharge efficiency. 400 to 500*103 m3 of spring water were injected annually into the ambient shallow groundwater in Mazraha station, which is used later for drinking purpose. Ambient groundwater and injected spring water are calcium bicarbonate type with EC about 880 ± 60 μS/cm and 300 ± 50 μS/cm, respectively. The injected water is under saturated versus calcite and the ambient groundwater is over saturated, while the recovered water is near equilibrium. It was observed that the injection process formed a chemical dilution plume that improves the groundwater quality. Results demonstrate that the hydraulic conductivity of the aquifer is estimated around 6.8*10?4 m/s. The effective diameter of artificial recharge is limited to about 250 m from the injection wells. Mixing rate of 30% is required in order to reduce nitrate concentration below 50 mg/l which is considered the maximum concentration limit for potable water. Deuterium and oxygen‐18 relationship demonstrates that mixing line between injected water and ambient groundwater has a slope of 6.1. Oxygen‐18 and Cl? plot indicates that groundwater salinity origin is from mixing process, and no dissolution and evaporation were observed. These results demonstrate the efficiency of the artificial recharge experiments to restore groundwater storage capacity and to improve the water quality. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

9.
Models for contaminant transport in streams commonly idealize transient storage as a well mixed but immobile system. These transient storage models capture rapid (near‐stream) hyporheic storage and transport, but do not account for large‐scale, stage‐dependent interaction with the alluvial aquifer. The objective of this research was to document transient storage of phosphorus (P) in coarse gravel alluvium potentially influenced by large‐scale, stage‐dependent preferential flow pathways (PFPs). Long‐term monitoring was performed at floodplain sites adjacent to the Barren Fork Creek and Honey Creek in northeastern Oklahoma. Based on results from subsurface electrical resistivity mapping which was correlated to hydraulic conductivity data, observation wells were installed both in higher hydraulic conductivity and lower hydraulic conductivity subsoils. Water levels in the wells were monitored over time, and water samples were obtained from the observation wells and the stream to document P concentrations at multiple times during high flow events. Contour plots indicating direction of flow were developed using water table elevation data. Contour plots of total P concentrations showed the alluvial aquifer acting as a transient storage zone, with P‐laden stream water heterogeneously entering the aquifer during the passage of a storm pulse, and subsequently re‐entering the stream during baseflow conditions. Some groundwater in the alluvial floodplains had total P concentrations that mirrored the streams' total P concentrations. A detailed analysis of P forms indicated that particulate P (i.e. P attached to particulates greater than 0·45 µm) was a significant portion of the P transport. This research suggests the need for more controlled studies on stage‐dependent transient storage in alluvial systems. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

10.
The expanding use of horizontal drilling and hydraulic fracturing technology to produce oil and gas from tight rock formations has increased public concern about potential impacts on the environment, especially on shallow drinking water aquifers. In eastern Kentucky, horizontal drilling and hydraulic fracturing have been used to develop the Berea Sandstone and the Rogersville Shale. To assess baseline groundwater chemistry and evaluate methane detected in groundwater overlying the Berea and Rogersville plays, we sampled 51 water wells and analyzed the samples for concentrations of major cations and anions, metals, dissolved methane, and other light hydrocarbon gases. In addition, the stable carbon and hydrogen isotopic composition of methane (δ13C‐CH4 and δ2H‐CH4) was analyzed for samples with methane concentration exceeding 1 mg/L. Our study indicates that methane is a relatively common constituent in shallow groundwater in eastern Kentucky, where methane was detected in 78% of the sampled wells (40 of 51 wells) with 51% of wells (26 of 51 wells) exhibiting methane concentrations above 1 mg/L. The δ13C‐CH4 and δ2H‐CH4 ranged from ?84.0‰ to ?58.3‰ and from ?246.5‰ to ?146.0‰, respectively. Isotopic analysis indicated that dissolved methane was primarily microbial in origin formed through CO2 reduction pathway. Results from this study provide a first assessment of methane in the shallow aquifers in the Berea and Rogersville play areas and can be used as a reference to evaluate potential impacts of future horizontal drilling and hydraulic fracturing activities on groundwater quality in the region.  相似文献   

11.
Well water temperatures are often collected simultaneously with water levels; however, temperature data are generally considered only as a water quality parameter and are not utilized as an environmental tracer. In this paper, water levels and seasonal temperatures are used to estimate hydraulic conductivities in a stream-aquifer system. To demonstrate this method, temperatures and water levels are analyzed from six observation wells along an example study site, the Russian River in Sonoma County, California. The range in seasonal ground water temperatures in these wells varied from <0.2 degrees C in two wells to approximately 8 degrees C in the other four wells from June to October 2000. The temperature probes in the six wells are located at depths between 3.5 and 7.1 m relative to the river channel. Hydraulic conductivities are estimated by matching simulated ground water temperatures to the observed ground water temperatures. An anisotropy of 5 (horizontal to vertical hydraulic conductivity) generally gives the best fit to the observed temperatures. Estimated conductivities vary over an order of magnitude in the six locations analyzed. In some locations, a change in the observed temperature profile occurred during the study, most likely due to deposition of fine-grained sediment and organic matter plugging the streambed. A reasonable fit to this change in the temperature profile is obtained by decreasing the hydraulic conductivity in the simulations. This study demonstrates that seasonal ground water temperatures monitored in observation wells provide an effective means of estimating hydraulic conductivities in alluvial aquifers.  相似文献   

12.
Soil bulk density (ρb) is commonly treated as static in studies of land surface dynamics. Magnitudes of errors associated with this assumption are largely unknown. Our objectives were to (a) quantify ρb effects on soil hydrologic and thermal properties and (b) evaluate effects of ρb on surface energy balance and heat and water transfer. We evaluated 6 soil properties, volumetric heat capacity, thermal conductivity, soil thermal diffusivity, water retention characteristics, hydraulic conductivity, and vapour diffusivity, over a range of ρb, using a combination of 6 models. Thermal conductivity, water retention, hydraulic conductivity, and vapour diffusivity were most sensitive to ρb, each changing by fractions greater than the associated fractional changes in ρb. A 10% change in ρb led to 10–11% change in thermal conductivity, 6–11% change in saturated and residual water content, 49–54% change in saturated hydraulic conductivity, and 80% change in vapour diffusivity. Subsequently, 3 field seasons were simulated with a numerical model (HYDRUS‐1D) for a range of ρb values. When ρb increased 25% (from 1.2 to 1.5 Mg m?3), soil temperature variation decreased by 2.1 °C in shallow layers and increased by 1 °C in subsurface layers. Surface water content differed by 0.02 m3 m?3 for various ρb values during drying events but differences mostly disappeared in the subsurface. Matric potential varied by >100 m of water. Surface energy balance showed clear trends with ρb. Latent heat flux decreased 6%, sensible heat flux increased 9%, and magnitude of ground heat flux varied by 18% (with a 25% ρb increase). Transient ρb impacted surface conditions and fluxes, and clearly, it warrants consideration in field and modelling investigations.  相似文献   

13.
According to the fact that the Xinfengjiang reservoir earthquakes are caused mainly by water seepage, this paper using the data ofM s?2. 0 earthquakes, studies the hydraulic diffusivity of the mainshock zone by the expansion of the distribution area of epicenters. It is indicated thatin-situ hydraulic diffusivity during the preshock activity of the Xinfengjiang reservoir region was about 6. 2 m2/s. However, after the main shock, thein-situ hydraulic diffusivity in the main shock region increased by fifty percent, that is to say, to 9. 7 m2/s. During the long period after main shock occurrence thein-situ hydraulic diffusivity was affected by significant anisotropy of the medium and fluctuation of water level. No regularity can be found. In addition, we compare the diffusivity found by experiment with rock samples collected with thein-situ hydraulic diffusivity estimated. It is shown that the diffusivity of rock samples with fractures is about the same as the diffusivity estimatedin-situ. However, the diffusivity of whole rock samples is 3 orders of magnitudes smaller than that estimatedin-situ. Finally, we discuss the limits on the method by the expansion of distribution area of epicenters in the study of reservoir induced seismicity.  相似文献   

14.
The present study makes use of a detailed water balance to investigate the hydrological status of a peatland with a basal clay‐rich layer overlying an aquifer exploited for drinking water. The aim is to determine the influence of climate and groundwater extraction on the water balance and water levels in the peatland. During the two‐year period of monitoring, the hydrological functioning of the wetland showed a hydric deficit, associated with a permanent unsaturated layer and a deep water table. At the same time, a stream was observed serving as a recharge inflow instead of draining the peatland, as usually described in natural systems. Such conditions are not favourable for peat accumulation. Field investigations show that the clay layer has a high hydraulic conductivity (from 1·10?7 to 3·10?9 m.s?1) and does not form a hydraulic barrier. Moreover, the vertical hydraulic gradients are downward between the peat and the sand aquifer, leading to high flows of groundwater through the clay layer (20–48% of the precipitation). The observed hydric deficit of the peatland results from a combination of dry climatic conditions during the study period and groundwater extraction. The climatic effect is mainly expressed through drying out of the peatland, while the anthropogenic effect leads to an enhancement of the climatic effect on a global scale, and a modification of fluxes at a local scale. The drying out of the peatland can lead to its mineralisation, which thus gives rise to environmental impacts. The protection of such wetlands in the context of climate change should take account of anthropogenic pressures by considering the wetland‐aquifer interaction. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

15.
The term capture, related to the source of water derived from wells, has been used in two distinct yet related contexts by the hydrologic community. The first is a water‐budget context, in which capture refers to decreases in the rates of groundwater outflow and (or) increases in the rates of recharge along head‐dependent boundaries of an aquifer in response to pumping. The second is a transport context, in which capture zone refers to the specific flowpaths that define the three‐dimensional, volumetric portion of a groundwater flow field that discharges to a well. A closely related issue that has become associated with the source of water to wells is streamflow depletion, which refers to the reduction in streamflow caused by pumping, and is a type of capture. Rates of capture and streamflow depletion are calculated by use of water‐budget analyses, most often with groundwater‐flow models. Transport models, particularly particle‐tracking methods, are used to determine capture zones to wells. In general, however, transport methods are not useful for quantifying actual or potential streamflow depletion or other types of capture along aquifer boundaries. To clarify the sometimes subtle differences among these terms, we describe the processes and relations among capture, capture zones, and streamflow depletion, and provide proposed terminology to distinguish among them.  相似文献   

16.
Concentrated flow is often the dominant source of water erosion following disturbance on rangelands. Because of the lack of studies that explain the hydraulics of concentrated flow on rangelands, cropland‐based equations have typically been used for rangeland hydrology and erosion modeling, leading to less accurate predictions due to different soil and vegetation cover characteristics. This study investigates the hydraulics of concentrated flow using unconfined field experimental data over diverse rangeland landscapes within the Great Basin Region, United States. The results imply that the overall hydraulics of concentrated flow on rangelands differ significantly from those of cropland rills. Concentrated flow hydraulics on rangelands are largely controlled by the amount of cover or bare soil and hillslope angle. New predictive equations for concentrated flow velocity (R2 = 0·47), hydraulic friction (R2 = 0·52), and width (R2 = 0·4) representing a diverse set of rangeland environments were developed. The resulting equations are applicable across a wide span of ecological sites, soils, slopes, and vegetation and ground cover conditions and can be used by physically‐based rangeland hydrology and erosion models to estimate rangeland concentrated flow hydraulic parameters. Published in 2011. This article is a US Government work and is in the public domain in the USA.  相似文献   

17.
The association between hydrocarbon‐rich reservoirs and organic‐rich source rocks means unconventional oil and gas plays usually occur in mature sedimentary basins—where large‐scale conventional development has already taken place. Abandoned wells in proximity to hydraulic fracturing could be affected by increased fluid pressures and corresponding newly generated fractures that directly connect (frac hit) to an abandoned well or to existing fractures intersecting an abandoned well. If contaminants migrate to a pathway hydraulically connected to an abandoned well, upward leakage may occur. Potential effects of hydraulic fracturing on upward flow through a particular type of leaky abandoned well—abandoned oil and gas wells converted into water wells were investigated using numerical modeling. Several factors that affect flow to leaky wells were considered including proximity of a leaky well to hydraulic fracturing, flowback, production, and leaky well abandonment methods. The numerical model used historical records and available industry data for the Eagle Ford Shale play in south Texas. Numerical simulations indicate that upward contaminant migration could occur through leaky converted wells if certain spatial and hydraulic conditions exist. Upward flow through leaky converted wells increased with proximity to hydraulic fracturing, but decreased when flowback and production occurred. Volumetric flow rates ranged between 0 and 0.086 m3/d for hydraulic‐fracturing scenarios. Potential groundwater impacts should be paired with plausible transport mechanisms, and upward flow through leaky abandoned wells could be unrelated to hydraulic fracturing. The results also underscore the need to evaluate historical activities.  相似文献   

18.
The objective of this study was to investigate whether 222Rn in groundwater can be used as a tracer for light non‐aqueous phase liquid (LNAPL) quantification at a field site treated by dual‐phase LNAPL removal. After the break of a pipeline, 5 ha of soil in the nature reserve Coussouls de Crau in southern France was contaminated by 5100 m3 of crude oil. Part of this oil seeped into the underlying gravel aquifer and formed a floating oil body of about 3.9 ha. The remediation consists of plume management by hydraulic groundwater barriers and LNAPL extraction in the source zone. 222Rn measurements were performed in 21 wells in and outside the source zone during 15 months. In uncontaminated groundwater, the radon activity was relatively constant and remained always >11 Bq/L. The variability of radon activity measurements in wells affected by the pump‐and‐skim system was consistent with the measurements in wells that were not impacted by the system. The mean activities in wells in the source zone were, in general, significantly lower than in wells upgradient of the source zone, owing to partitioning of 222Rn into the oil phase. The lowest activities were found in zones with high non‐aqueous phase liquid (NAPL) recovery. LNAPL saturations around each recovery well were furthermore calculated during a period of high groundwater level, using a laboratory‐determined crude oil–water partitioning coefficient of 38.5 ± 2.9. This yielded an estimated volume of residual crude oil of 309 ± 93 m3 below the capillary fringe. We find that 222Rn is a useful and cheap groundwater tracer for finding zones of good LNAPL recovery in an aquifer treated by dual‐phase LNAPL removal, but that quantification of NAPL saturation using Rn is highly uncertain.  相似文献   

19.
According to the fact that the Xinfengjiang reservoir earthquakes are caused mainly by water seepage, this paper using the data ofM s⩾2. 0 earthquakes, studies the hydraulic diffusivity of the mainshock zone by the expansion of the distribution area of epicenters. It is indicated thatin-situ hydraulic diffusivity during the preshock activity of the Xinfengjiang reservoir region was about 6. 2 m2/s. However, after the main shock, thein-situ hydraulic diffusivity in the main shock region increased by fifty percent, that is to say, to 9. 7 m2/s. During the long period after main shock occurrence thein-situ hydraulic diffusivity was affected by significant anisotropy of the medium and fluctuation of water level. No regularity can be found. In addition, we compare the diffusivity found by experiment with rock samples collected with thein-situ hydraulic diffusivity estimated. It is shown that the diffusivity of rock samples with fractures is about the same as the diffusivity estimatedin-situ. However, the diffusivity of whole rock samples is 3 orders of magnitudes smaller than that estimatedin-situ. Finally, we discuss the limits on the method by the expansion of distribution area of epicenters in the study of reservoir induced seismicity. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,13, 364–371, 1991. This subject is sponsored by the Chinese Joint Seismological Science Foundation.  相似文献   

20.
Two methods for estimating the true formation temperature from well logs are compared. One method requires knowledge of the circulation time, whereas the other requires an estimate of the thermal diffusivity of the contents of the well. Both methods require three or more successive bottom-hole temperature measurements. Data from 157 wells have been analyzed, and the calculated formation temperatures from the two methods agree well. By an analysis of best matching of the two methods, it is found that 0.35 × 10-6 m2 s-1 is a good estimate for the thermal diffusivity of the well contents.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号