共查询到20条相似文献，搜索用时 140 毫秒
1.
A simplified method of numerical analysis has been developed to estimate the deformation and load distribution of piled raft foundations subjected to vertical, lateral, and moment loads, using a hybrid model in which the flexible raft is modelled as thin plates and the piles as elastic beams and the soil is treated as springs. Both the vertical and lateral resistances of the piles as well as the raft base are incorporated into the model. Pile–soil–pile, pile–soil–raft and raft–soil–raft interactions are taken into account based on Mindlin's solutions for both vertical and lateral forces. The validity of the proposed method is verified through comparisons with several existing methods for single piles, pile groups and piled rafts. Workable design charts are given for the estimation of the lateral displacement and the load distribution of piled rafts from the stiffnesses of the raft alone and the pile group alone. Additionally, parametric studies were carried out concerning batter pile foundations. It was found that the use of batter piles can efficiently improve the deformation characteristics of pile foundations subjected to lateral loads. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
2.
The influence of vertical loads on the lateral response of group piles installed in sandy soil and connected together by a concrete cap is studied through finite elements analyses. The analyses focus on the five piles in the middle row of 3 × 5 pile groups. The vertical load is applied by enforcing a vertical displacement equivalent to 2% of the pile diameter through the pile cap prior to the application of the lateral loads. The results have shown that the lateral resistance of the leading pile (pile 1) does not appear to vary considerably with the vertical load. However, the vertical load leads to 23%, 36%, 64%, and 82% increase in the lateral resistance of piles 2–5, respectively. The increase in the lateral pressures in the sand deposit is the major driving factor to contribute the change in the lateral resistance of piles, depending on the position of the pile in the group. The distribution of lateral loads among piles in the group tends to be more uniform when vertical loads were considered leading to a more economical pile foundation design. 相似文献
3.
Yoon Seok Choi Jintae Lee Monica Prezzi Rodrigo Salgado 《Geotechnical and Geological Engineering》2017,35(4):1587-1604
Although the loads applied on piles are usually a combination of both vertical and lateral loads, very limited experimental research has been done on the response of pile groups subjected to combined loads. Due to pile–soil–pile interaction in pile groups, the response of a pile group may differ substantially from that of a single pile. This difference depends on soil state and pile spacing. This paper presents results of experiments designed to investigate pile interaction effects on the response of pile groups subjected to both axial and lateral loads. The experiments were load tests performed on model pile groups (2 × 2 pile groups) in calibration chamber sand samples. The model piles were driven into the sand samples prepared with different relative densities using a sand pluviator. The combined load tests were performed on the model pile groups subjected to different axial load levels, i.e., 0 (pure lateral loading), 25, 50, and 75% of the ultimate axial load capacity of the pile groups, defined as the load corresponding to a settlement of 10% of the model pile diameter. The combined load test results showed that the bending moment and lateral deflection at the head of the piles increased substantially for tests performed in the presence of axial loads, suggesting that the presence of axial loads on groups of piles driven in sand is detrimental to their lateral capacity. 相似文献
4.
Goit Chandra Shekhar Saitoh Masato Igarashi Takumi Sasaki Shun 《Acta Geotechnica》2021,16(4):1231-1245
Physical-scaled model testing under 1 g conditions is carried out in obtaining the vertical response of fixed head floating-inclined single piles embedded in dry sand. Practical pile inclinations of 5° and 10° besides a vertical pile (0°) subjected to static and dynamic vertical pile head loadings are considered. To account for the effects of soil nonlinearity as well as the soil–pile interface nonlinearity on the response of piles, a range of low-to-high magnitude of pile head displacements is considered for the static case while a varying amplitude of harmonic accelerations for a wide range of frequencies is considered for the dynamic case. Experimental results are obtained in the form of pile head stiffnesses and strains generated in the pile under both the static and dynamic loadings. Results suggest that the nonlinear behavior of soil as well as the nonlinearity generated at the interface between the soil and the pile as the result of applied loading considerably affect the response of piles. The soil–pile interface nonlinearity that governs the slippage of pile shows a clear influence on the pile head stiffnesses by providing two distinct values of stiffnesses corresponding to the push and the pull directional movement of piles; the two values are significantly different. Axial and bending strains generated in the piles show expected dependency on the amplitude of applied loading; the pile head-level bending strain increases almost linearly with the increase in the angle of pile inclination.
相似文献5.
Analysis of rectangular piles subjected to lateral loads in nonhomogeneous soil using a Winkler model approach 
下载免费PDF全文
下载免费PDF全文 Hiroyoshi Hirai 《国际地质力学数值与分析法杂志》2015,39(9):937-968
An analytical approach using a Winkler model based on two lateral soil displacement components in a three‐dimensional soil is investigated to provide analytical solutions of horizontal response of a rectangular pile subjected to lateral loads in nonhomogeneous soil. The two lateral displacement components of a soil surrounding the rectangular pile are represented by the Fourier series of displacement potential functions in the elastic three‐dimensional analysis. The lateral stiffness coefficient of the rectangular pile shaft in nonhomogeneous soil is derived from the rocking stiffness coefficient taking into account rocking rotation of a rigid pile shaft. The relationship between horizontal displacement, rotation, moment, and shear force for the rectangular pile subjected to horizontal loads in nonhomogeneous soil is obtainable in the form of the recurrence equation. The formulation of lateral displacement and rotation for a rectangular pile subjected to lateral loads on the pile base in nonhomogeneous soil is proposed by taking into account Mindlin's equation and the equivalent thickness for soil layers in the equivalent elastic method. The difference of lateral behavior between square and circular piles subjected to lateral loads is insignificant. The effect of aspect ratio of the rectangular pile on the lateral behavior is great for the lower stiffness ratio between pile and soil and the larger length–equivalent diameter ratio. The effect of the value of Poisson's ratio of soil on lateral stiffness coefficient is relatively small except Poisson's ratio close to 0.5. The comparison of the results calculated by the current method for a rectangular pile subjected to lateral loads in nonhomogeneous soil has shown good agreement with those obtained from the analytical methods and the finite element method. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
6.
Ahmed M. Fahmy John R. de Bruyn T. A. Newson 《Geotechnical and Geological Engineering》2013,31(5):1525-1542
Two-dimensional plane strain finite element analysis has been used to simulate the inclined pullout behavior of strip anchors embedded in cohesive soil. Previous studies by other researchers were mainly concerned with plate anchors subjected to loads perpendicular to their longest axis and applied through the centre of mass. This paper investigates the behavior of vertical anchors subjected to pullout forces applied at various inclinations with respect to the longest anchor axis, and applied at the anchor top and through the centre of mass. The effects on the pullout behavior of embedment depth, overburden pressure, soil–anchor interface strength, anchor thickness, rate of clay strength increase, anchor inclination, load inclination and soil disturbance due to anchor installation were all studied. Anchor capacity is shown to increase with load inclination angle for anchors loaded through the centre of mass; greater effects are found for higher embedments. The results also show that anchor capacity improves at a decreasing rate with higher rates of increase of soil shear strength with depth. In addition, the capacity of vertically loaded anchors is shown to approximately double when the soil–anchor interface condition changes from fully separated to fully bonded. Similarly, disturbed clay strengths adjacent to the anchor following installation cause a significant reduction in anchor capacity. The results showed a significant effect of the point of load application for anchors inclined and normally loaded. The effects of other parameters, such as anchor thickness, were found to be less significant. 相似文献
7.
Disconnected piled raft foundations are characterised by no structural connection between the upper raft and the underlying piles, mostly playing the role of settlement-reducers. The resulting raft–pile gap is usually filled with a granular interlayer, through which the loads from the superstructure are transferred to the piles.In this paper, the complex interaction mechanisms involving the foundational components (raft, piles and soil) are numerically investigated by means of 3D finite elements analyses, accounting for soil non-linearity. The main features of the soil–structure interaction mechanisms under purely vertical external loads are explored over a realistic range of raft–soil gaps for different pile configurations, in which the number of piles – i.e. their spacing – is varied. Special attention is also devoted to the structural response of the piles in terms of axial and bending internal stress resultants. In particular, while disconnection beneficially affects the structural pile response, increasing the raft–pile gap tends to reduce the overall settlement/stiffness efficiencies.The numerical results being presented are in substantial agreement with the outcomes from literature small-scale experiments and suggest a number of relevant theoretical inferences. 相似文献
8.
《Geomechanics and Geoengineering》2013,8(4):263-282
Vertical loads effect on the lateral response of a 3×5 pile group embedded in sand is studied through a two-dimensional finite element analysis. The soil-pile interaction in three-dimensional type is idealized in the two-dimensional analysis using soil-pile interaction springs with a hysteretic nonlinear load displacement relationship. Vertical loads inducing a vertical pile head displacement of 0.1-pile diameter increase the lateral resistance of the single pile at a 60 mm lateral deflection by 8%. Vertical loads inducing the same vertical displacement applied to a pile group spaced at 3.92-pile diameter increase the overall lateral resistance by 9%. The effect on individual piles, however, depends on the pile position. The vertical load decreases the lateral resistance of the leading pile (pile 1) by 10% and increases the lateral resistances of piles 2, 3, 4, and 5 by 9%, 14%, 17%, and 35%, respectively. Vertical loads applied to the pile group increase the confining pressures in the sand deposit confined by the piles but the rate of increase in those outside the group is relatively small, resulting in the difference in a balance of lateral soil pressures acting at the back of and in front of the individual pile. 相似文献
9.
Hasan Ghasemzadeh Mohsen Tarzaban Mohammad Mahdi Hajitaheriha 《Geotechnical and Geological Engineering》2018,36(4):2189-2215
Battered piles are usually used to counteract lateral forces in a pile group. As there is little spacing between piles, they are affected by one another, and there is interaction between them. In this study, pile–soil–pile interaction in a group of battered piles was numerically simulated using finite element analysis. Double and frictional pile groups under static lateral and axial loadings were analyzed separately. The effects of batter angle, slenderness ratio, spacing between piles, pile–soil stiffness ratio, and soil plasticity on interaction factors were computed and presented in curves. 相似文献
10.
Methane hydrate (MH) is extensively found in outer continental margins where offshore infrastructures with pile foundations are also common. The presence of MHs significantly alters the mechanical properties of the host marine sediments, and therefore affects the behavior of piles inside. This paper presents an attempt to investigate the performance of a single pile in methane hydrate bearing sands in seabed using the distinct element method. A novel bond contact model was employed for sandy grains cemented by MHs at contacts, and calibrated from the triaxial compression tests on synthetic specimens of methane hydrate bearing sands. The response of the pile subjected to axial pullout loads and lateral loads was simulated under different subsurface conditions characterized by different saturation levels of MHs. The results show that the presence of MHs increases the uplift capacity of the pile by changing the failure mode of the soils from the perimeter failure to the conical failure. The uplift capacity of the pile significantly deteriorates as a result of de-bonding, while the onset of the rapid de-bonding triggers the softening of the uplift load. In addition, the lateral capacity of the pile largely increases due to the presence of MHs. The pile in methane hydrate bearing sands is considered flexible rather than rigid as a result of the increased deformation modulus of soils due to MH cementation between particles. The lateral load–displacement diagram of the pile in methane hydrate bearing sands is not as smooth as that in clean sands with an abrupt drop associated with the onset of de-bonding. 相似文献
11.
《Geomechanics and Geoengineering》2013,8(4):291-298
The buckling behaviour of the 360 × 152 steel H-piles supporting the integral abutments of the Scotch Road Bridge, located in Trenton, New Jersey, has been studied for the cases of single pile and pile bent. Three-dimensional finite-element models for single pile and pile bent have been developed to study the behaviour of these fully embedded piles under axial and lateral loading. An iterative analysis based on extracting the eigenvalues and eigenvectors (mode shapes) that correspond to the pile(s) critical buckling loads has been adopted. The pile(s) and the surrounding sand were modelled using solid continuum elements in the finite-element model. Material non-linearity is accounted for in both the piles and the soil in the base state of the model. A parametric study has been utilized to determine the effect of the geometric and material properties of the pile and the surrounding sand on the predicted critical buckling loads of the piles. The effects of four parameters have been studied: soil stiffness, pile length, type of connection, and combining vertical and lateral loads. The results from the parametric study showed that the variation of the percentage change in the sand stiffness, pile length, and combining vertical and lateral loads with the critical buckling loads of the 360 × 152 H-piles is nonlinear. Furthermore, the parameters studied are more influential in affecting the critical buckling load of a single pile than a pile bent, with the exception of the ‘type of connection’ parameter. 相似文献
12.
In geotechnical practice, it is of considerable importance to assess the behavior of vertical–lateral coupled loading piles in multilayered soil deposits. This study deals with a semi-analytical formulation for the performance of a pile suffering from combined vertical and lateral loads. The emphasis is on quantifying the mobilization of the subgrade reaction provided by the layered soil stratums. In the proposed method, subgrade reactions, correlated with both the accumulative axial load transfer and side resistances depending upon the pile–soil interaction, are abstracted as a series of nonlinear springs in both vertical and lateral directions. On account of this, an alternative transfer matrix method is applied to characterize the pile reaction along the depth under the identified boundary conditions atop the pile; meanwhile, the condition of static equilibrium, between two specific pile segments located at the border of soil layers, is also essential. On this basis, validation of the solution is conducted by comparing with observations from experiments and predictions obtained from other existing methods. In addition, the influence of properties in shallow soil layer and the vertical load on the lateral response of the pile is also discussed. The results indicate a reduction in the lateral displacement and the maximum bending moment within the pile with the increase in the shallow soil stiffness, but a growth with the increase in vertical load due to the “P-Δ effect.” 相似文献
13.
水平荷载下导管架平台桩基础的非线性有限元分析 总被引：2，自引：0，他引：2
导管架平台桩基础的控制荷载主要为风荷载、波浪荷载、地震荷载等水平荷载,为研究水平荷载下导管架平台桩基础的承载特性,采用非线性有限元分析方法对水平荷载下桩-土之间的相互作用进行研究,提出了有效模拟桩基水平承载特性的有限元模型,分析了模型桩的刚度、直径、土质参数中水平土压力系数、剪胀角对桩基承载特性的影响及水平荷载下群桩承载特性,并将有限元计算结果与API规范及模型试验结果进行对比。研究结果表明,非线性有限元分析方法分析水平荷载下桩-土相互作用是可行的,计算结果可为导管架平台的桩基设计提供参考。 相似文献
14.
This work presents analytical solutions to compute the vertical stresses for a cross‐anisotropic half‐space due to various loading types by batter piles. The loading types are an embedded point load for an end‐bearing pile, uniform skin friction, and linear variation of skin friction for a friction pile. The cross‐anisotropic planes are parallel to the horizontal ground surface. The proposed solutions can be obtained by utilizing Wang and Liao's solutions for a horizontal and vertical point load acting in the interior of a cross‐anisotropic medium. The derived cross‐anisotropic solutions using a limiting approach are in perfect agreement with the isotropic solutions of Ramiah and Chickanagappa with the consideration of pile inclination. Additionally, the present solutions are identical to the cross‐anisotropic solutions by Wang for the batter angle equals to 0. The influential factors in yielded solutions include the type and degree of geomaterial anisotropy, pile inclination, and distinct loading types. An example is illustrated to clarify the effect of aforementioned factors on the vertical stresses. The parametric results reveal that the stresses considering the geomaterial anisotropy and pile batter differ from those of previous isotropic and cross‐anisotropic solutions. Hence, it is imperative to take the pile inclination into account when piles are required to transmit both the axial and lateral loads in the cross‐anisotropic media. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
15.
Consoli Nilo Cesar Reginato Naiara da Costa Lopes Júnior Luizmar da Silva Rocha Marcelo Maia Faro Vítor Pereira Born Ricardo Bergan 《Geotechnical and Geological Engineering》2021,39(6):4295-4313
This paper describes the main features related to lateral displacements with depth after successive lateral loading–unloading cycles applied to the top of reinforced-concrete flexible bored piles embedded in naturally bonded residual soil. The bored piles under study have a cylindrical shape, with 0.40-m in diameter and 8.0-m in length. Both bored piles types (P1 and P2) include an embedded steel pipe section in their center as longitudinal steel reinforcements: pile type P1 has another 16 steel rods as steel reinforcement to concrete while pile type P2 has no further steel reinforcement. Pile type P1 has three times as much stiffness (EI) and four and a half times the plastic moment (My) than pile type P2. A similar load–displacement performance was observed at initial loads as for small displacements of both piles. At this initial loading stage, the response of the reinforced concrete piles is a function of the soil characteristics and of a linear elastic pile deformation. During this stage, piles can even be understood as probes for evaluating soil reactions. For larger horizontal displacements, after the concrete section starts undergoing large deformations, approaching the ultimate bending moment, pile behavior and consequently the load–displacement relation starts to diverge for both piles. For pile P1 the values of relevant lateral displacements are extended to about 2.5-m in depth, while for pile P2 lateral displacements are mostly constrained to about 2.0-m in depth. Measurements of horizontal displacements of pile P1 against depth recorded with a slope indicator show that, after unloading, lateral loads at distinct stages (small and near failure loads), exhibits a much higher elastic phase of the system response. An analytical fitting model of soil reaction is proposed based on the measured displacements from slope indicator. The integration of a continuous model proposed for the soil reaction agrees fairly well with the measured displacements up to moments close to plastic limit. Results of load–displacement show that the stiffer pile (P1) was able to mobilize twice as much lateral load compared to pile P2 for a service limit displacement of about 20 mm. The paper shows results that enable the isolation of the structural variable through real scale pile load tests, thus granting understanding of its importance and enabling its quantitative visualization in examples of piles embedded in residual soil sites.
相似文献16.
根据软土地基、非软土地基中长钻孔灌注桩静载荷试验和桩身轴力的测试结果,分析探讨了竖向荷载下长桩的受力性能及沉降特征的一些规律。桩侧土模量较高的非软土地区的长桩静力试桩所测得的结果表明,荷载传递和桩身压缩与软土地区超长桩性状相似,长桩的桩身压缩量相当可观,计算中应予以考虑。极限侧阻力与端阻力不同步发挥,不同深度处的不同土层处基桩的侧阻也不能同步发挥;同时指出相关规范中极限承载力计算公式的不严密之处,并且探讨说明了竖向荷载下的长群桩基础变形性状及沉降计算有待进一步的研究。本项研究对今后超长桩的理论研究和工程设计应用具有一定的借鉴作用。 相似文献
17.
在大桩径、小桩距的群桩条件下,不仅有来自桩侧、桩端和承台传递的多重应力叠加,还有群桩对桩间土的夹持作用影响,桩-土-承台之间作用更加复杂。用有限差分软件模拟固定桩距、桩径,变化竖向荷载下桩-土-承台的相互作用。从各层土的侧摩阻力、不同位置桩的桩顶荷载、荷载-沉降关系、桩间土体位移等方面的计算结果分析桩-土-承台之间的相互影响。结果表明,荷载超出117.8 MN（略大于Pu/2,Pu为群桩极限承载力）后,群桩对上部桩间土的夹持作用开始减小,桩侧上部侧摩阻力增大;桩侧下部侧摩阻力在多重应力叠加作用下呈减小趋势,不同位置的桩侧摩阻力影响范围有差异;用群桩沉降达到5%倍桩径时的荷载作为群桩的竖向极限承载力是可取的;当沉降与桩径的比值超出1%后,承台分担荷载的比例逐渐增大,群桩分担荷载的比例减小。 相似文献
18.
Zheng Li Panagiotis Kotronis Sandra Escoffier Claudio Tamagnini 《国际地质力学数值与分析法杂志》2018,42(12):1346-1365
Batter piles are widely used in geotechnical engineering when substantial lateral resistance is needed or to avoid the interference with existing underground constructions. Nevertheless, there is a lack of fast numerical tools for nonlinear soil‐structure interactions problems for this type of foundation. A novel hypoplastic macroelement is proposed, able to reproduce the nonlinear response of a single batter pile in sand under monotonic and cyclic static loadings. The behavior of batter piles (15°, 30°, and 45°) is first numerically investigated using 3D finite element modeling and compared with the behavior of vertical piles. It is shown that their response mainly depends on the pile inclination and the loading direction. Then, starting from the macroelement for single vertical piles in sand by Li et al (Acta Geotechnica, 11(2):373‐390, 2016), an extension is proposed to take into account the pile inclination introducing simple analytical equations in the expression describing the failure surface. 3D finite element numerical models are adopted to validate the macroelement that is proven able to reproduce the nonlinear behavior in terms of global quantities (forces‐displacements) and to significantly reduce the necessary computational time. 相似文献
19.
Y. K. CHOW 《国际地质力学数值与分析法杂志》1996,20(9):635-646
Piles used for the stabilization of slopes have to be adequately designed to resist the induced lateral loads due to the movement of the unstable slope. In this paper, a numerical method is presented for the analysis of this problem. In this approach, the piles are modelled using beam finite elements. The soil response at the individual piles is modelled using the modulus of subgrade reaction and pile–soil–pile interaction considered using the theory of elasticity. Two case histories, one for single pile and the other for pile group, are analysed which show that the numerical model can predict the general characteristics of the piles reasonably well. The study suggests that the design of the piles based on the computed response from single pile analysis, ignoring group effects, may be unduly conservative. 相似文献
20.
A Winkler model approach for vertically and laterally loaded piles in nonhomogeneous soil 总被引：1，自引：0，他引：1
Hiroyoshi Hirai 《国际地质力学数值与分析法杂志》2012,36(17):1869-1897
An investigation is made to present analytical solutions provided by a Winkler model approach for the analysis of single piles and pile groups subjected to vertical and lateral loads in nonhomogeneous soils. The load transfer parameter of a single pile in nonhomogeneous soils is derived from the displacement influence factor obtained from Mindlin's solution for an elastic continuum analysis, without using the conventional form of the load transfer parameter adopting the maximum radius of the influence of the pile proposed by Randolph and Wroth. The modulus of the subgrade reaction along the pile in nonhomogeneous soils is expressed by using the displacement influence factor related to Mindlin's equation for an elastic continuum analysis to combine the elastic continuum approach with the subgrade reaction approach. The relationship between settlement and vertical load for a single pile in nonhomogeneous soils is obtained by using the recurrence equation for each layer. Using the modulus of the subgrade reaction represented by the displacement influence factor related to Mindlin's solution for the lateral load, the relationship between horizontal displacement, rotation, moment, and shear force for a single pile subjected to lateral loads in nonhomogeneous soils is available in the form of the recurrence equation. The comparison of the results calculated by the present method for single piles and pile groups in nonhomogeneous soils has shown good agreement with those obtained from the more rigorous finite element and boundary element methods. It is found that the present procedure gives a good prediction on the behavior of piles in nonhomogeneous soils. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献