共查询到20条相似文献，搜索用时 31 毫秒
1.
《The Cartographic journal》2013,50(1):21-26
AbstractThe spatially discontinuous choropleth map is a poor representation of the underlying continuous distribution of population density. A possible alternative is to derive dasymetric maps at a fine spatial resolution by making use of satellite imagery in a geographical information system. However, there are cartographic problems when these maps are displayed and further processing is needed in order to obtain approximations to a continuous density surface. Isarithmic maps of these density surfaces retain a high degree of spatial accuracy while providing pleasing and highly adaptable presentations.The methods used to generate dasymetric and isarithmic maps are readily implemented in most raster based geographical information systems. For example, the classification of remotely sensed imagery, the subsequent processing and integration of data, and most of the cartographic display, were all undertaken in this work using the low cost IDRISI GIS that operates on standard IBM PC compatible hardware. 相似文献
2.
《制图学和地理信息科学》2013,40(2):103-121
This paper describes techniques to compute and map dasymetric population densities and to areally interpolate census data using dasymetrically derived population weights. These techniques are demonstrated with 1980-2000 census data from the 13-county Atlanta metropolitan area. Land-use/land-cover data derived from remotely sensed satellite imagery were used to determine the areal extent of populated areas, which in turn served as the denominator for dasymetric population density computations at the census tract level. The dasymetric method accounts for the spatial distribution of population within administrative areas, yielding more precise population density estimates than the choroplethic method, while graphically representing the geographic distribution of populations. In order to areally interpolate census data from one set of census tract boundaries to another, the percentages of populated areas affected by boundary changes in each affected tract were used as adjustment weights for census data at the census tract level, where census tract boundary shifts made temporal data comparisons difficult. This method of areal interpolation made it possible to represent three years of census data (1980, 1990, and 2000) in one set of common census tracts (1990). Accuracy assessment of the dasymetrically derived adjustment weights indicated a satisfactory level of accuracy. Dasymetrically derived areal interpolation weights can be applied to any type of geographic boundary re-aggregation, such as from census tracts to zip code tabulation areas, from census tracts to local school districts, from zip code areas to telephone exchange prefix areas, and for electoral redistricting. 相似文献
3.
《制图学和地理信息科学》2013,40(2):77-102
This paper discusses the importance of determining an accurate depiction of total population and specific sub-population distribution for urban areas in order to develop an improved "denominator," which would enable the calculation of more correct rates in GIS analyses involving public health, crime, and urban environmental planning. Rather than using data aggregated by arbitrary administrative boundaries such as census tracts, we use dasymetric mapping, an areal interpolation method using ancillary information to delineate areas of homogeneous values. We review previous dasymetric mapping techniques (which often use remotely sensed land-cover data) and contrast them with our technique, Cadastral-based Expert Dasymetric System (CEDS), which is particularly suitable for urban areas. The CEDS method uses specific cadastral data, land-use filters, modeling by expert system routines, and validation against various census enumeration units and other data. The CEDS dasymetric mapping technique is presented through a case study of asthma hospitalizations in the Bronx, New York City, in relation to proximity buffers constructed around major sources of air pollution. The case study shows the impact that a more accurate estimation of population distribution has on a current environmental justice and health disparities research project, and the potential of CEDS for other GIS applications. 相似文献
4.
蒸散发是水圈、大气圈和生物圈中水分循环和能量交换的纽带。在全球尺度上,蒸散发约占陆地降水总量的60%;作为其能量表达形式,潜热通量约占地表净辐射的80%。随着通量观测技术的发展,全球长期持续的观测数据得以获取和共享,近年来基于数据驱动的蒸散发遥感反演方法取得了较好的研究进展。本文针对数据驱动的蒸散发遥感反演方法和产品,从经验回归、机器学习和数据融合3个方面展开,对现有的研究进展进行了梳理、归纳和总结,并从驱动数据、反演方法、已有产品等方面指出目前仍存在的问题和不足。未来仍需开展数据驱动的高时空分辨率的蒸散发遥感反演方法的研究,有效考虑地表温度和土壤水分等可以指示地表蒸散发短期变化的重要信息,同时加强基于过程驱动的物理模型与数据驱动的模型的结合,使两类模型能互为补充、各自发挥所长,共同推动蒸散发遥感反演研究水平的进步。 相似文献
5.
《制图学和地理信息科学》2013,40(4):411-423
Over the years many approaches to areal interpolation have been developed and utilized. They range from the simple 2-D areal weighing method which uses only the spatial Z variable being processed, to more sophisticated approaches which use auxiliary variable(s) to provide more specificity to the results. In the research reported here, four promising approaches are implemented and comparatively tested. These approaches have widely varying conceptual foundations, and different auxiliary variables, if used. The areal weighing reflects many earlier methods which assumes uniform distributions of the spatial Z variable, and does not use any auxiliary variable. Tobler's pycnophylactic method uses a volumetric preservation approach, which assumes spatial Z variable is heterogeneously distributed, but does not use any auxiliary variable. The traditional dasymetric method of Wright is used with remote sensing spectral data of land use. Xie's road network hierarchically weighted interpolation uses the road network as the auxiliary variable, and assumes that population density is related to the class of the road, and to the density of the road network. The research design implemented here uses Census population distributions at different levels in the hierarchy as the source and target variables analyzed. The source zone population is taken at the Census Tract level, and the target zones are specified at the Census Block Group level in the hierarchy. The first two tests use only the Census population Z data, and no auxiliary variables, whereas the next uses remotely sensed land use data as the auxiliary data variable, and the fourth test utilizes the road network hierarchy as the auxiliary variable. The paper reports on the findings from these tests, and then interprets them in a spatial setting in terms of accuracy and effectiveness. This research points to the network method as the most accurate of the areal interpolation methods tested in this research. 相似文献
6.
Zhanfeng Shen Jiancheng Luo Wei Wu Xiaodong Hu 《Journal of the Indian Society of Remote Sensing》2012,40(3):357-370
Object-oriented remotely sensed images processing method has been accepted by more and more experts of remote sensing. To advance the efficiency of data processing, parallel image computing is a good choice since large volumes of data need be analyzed efficiently and rapidly. This paper presents the information extraction method based on per-parcel extraction of high-resolution remotely sensed image; to extract efficiently different information from remotely sensed image, this paper gives the research idea of image rough-classification based on large-scale and subtle-segmentation based on small-scale; to improve the efficiency of image processing, we adapt parallel computing method to solve this problem by presenting an new data-partition method. At last this paper gives the implementation of the research idea based on Message Passing Interface (MPI) and analyzes our experimental system efficiency, and the results show that the new methods can improve the efficiency of high-resolution remotely sensed image data processing efficiently and have a good application. 相似文献
7.
Forrest R. Stevens Andrea E. Gaughan Jeremiah J. Nieves Adam King Alessandro Sorichetta Catherine Linard 《International Journal of Digital Earth》2020,13(1):78-100
ABSTRACTMapping built land cover at unprecedented detail has been facilitated by increasing availability of global high-resolution imagery and image processing methods. These advances in urban feature extraction and built-area detection can refine the mapping of human population densities, especially in lower income countries where rapid urbanization and changing population is accompanied by frequently out-of-date or inaccurate census data. However, in these contexts it is unclear how best to use built-area data to disaggregate areal, count-based census data. Here we tested two methods using remotely sensed, built-area land cover data to disaggregate population data. These included simple, areal weighting and more complex statistical models with other ancillary information. Outcomes were assessed across eleven countries, representing different world regions varying in population densities, types of built infrastructure, and environmental characteristics. We found that for seven of 11 countries a Random Forest-based, machine learning approach outperforms simple, binary dasymetric disaggregation into remotely-sensed built areas. For these more complex models there was little evidence to support using any single built land cover input over the rest, and in most cases using more than one built-area data product resulted in higher predictive capacity. We discuss these results and implications for future population modeling approaches. 相似文献
8.
遥感信息处理不确定性的可视化表达 总被引：2，自引：0，他引：2
如何全面、准确地度量和可视化表达遥感信息处理中不确定性的程度和空间分布方式,是遥感信息不确定性研究的关键问题之一.传统的度量方法(例如误差矩阵)是将以训练样本集为基础的度量作为总分类精度的度量,而我们需要估计模型对于"样本外数据"的性能.本文首先利用信息论和粗糙集理论等度量遥感分类影像属性信息的不确定性,提出基于像元、目标和影像的遥感信息不确定性度量指标;然后分别描述了基于不同度量指标的可视化表达方式,并对我国黄河三角洲地区的Landsat TM影像进行了分类信息不确定性度量和可视化表达实验. 相似文献
9.
非均匀地表蒸散遥感研究综述 总被引：2，自引：0，他引：2
本文评述了目前常用的遥感估算地表蒸散方法,包括地表能量平衡模型、Penman-Monteith类模型、温度—植被指数特征空间方法、Priestley-Taylor类模型和其他方法。然而使用这些方法估算地表蒸散时会面临严重的尺度效应,而产生尺度效应的根本原因之一是地表异质性,在分析了非均匀下垫面对水热通量遥感反演造成的影响后,介绍了面积加权、校正因子补偿与温度降尺度3种尺度误差纠正方法;并从地面观测实验的角度简述了非均匀下垫面水热通量真实性检验的研究;最后探讨了将来建立更具时空代表性的非均匀下垫面地表蒸散遥感估算模型可能会面临的一些挑战。 相似文献
10.
土壤蒸发和植被蒸腾遥感估算与验证 总被引：1，自引：0，他引：1
地表蒸散发是土壤—植被—大气系统中能量和水循环的重要环节,它包括土壤、水体和植被表面的蒸发,以及植被蒸腾。随着地表参数多源遥感产品的快速发展,利用不同地表参数遥感产品估算地表蒸散发以及其组分土壤蒸发和植被蒸腾成为日常监测越来越便利,监测尺度已从单站扩展到田块、区域乃至全球。目前地表蒸散发双层遥感估算模型按照建模机理的不同可分为:系列模型、平行模型、基于特征空间的模型、结合传统方法的模型以及数据同化方法。本文从模型构建物理机制、模型驱动数据以及模型输出结果验证等方面总结了上述模型的发展历史和现状,并指出在模型结构与参数化方案的优化、高分辨率模型驱动数据的发展、土壤蒸发和植被蒸腾像元尺度"地面真值"的获取等方面都仍需进一步完善。 相似文献
11.
基于频域滤波的高分辨率遥感图像城市河道信息提取 总被引：2，自引：0，他引：2
提出一种基于频域滤波的城市河道信息提取方法。首先对高分辨率遥感图像进行傅里叶变换得到频谱图, 并利用径向和角向分布图分析城市河道的频谱特征。其次, 基于城市河道的双线型特点, 将其分为边缘特征和低频信息两个部分, 并根据周期性纹理的频谱模型和地物频谱能量分布规律确定两个部分的频域识别标志。然后设计相应的扇环形带通log Butterworth滤波器和低通Butterworth滤波器分别对城市河道的边缘特征和低频信息进行提取, 并根据该两部分信息实现城市河道信息提取。最后对城市河道信息提取结果进行定量评价, 结果表明, 本文方法可以有效地实现城市河道的信息提取。 相似文献
12.
The mixed pixel problem affects the extraction of land cover information from remotely sensed images. Super-resolution mapping (SRM) can produce land cover maps with a finer spatial resolution than the remotely sensed images, and reduce the mixed pixel problem to some extent. Traditional SRMs solely adopt a single coarse-resolution image as input. Uncertainty always exists in resultant fine-resolution land cover maps, due to the lack of information about detailed land cover spatial patterns. The development of remote sensing technology has enabled the storage of a great amount of fine spatial resolution remotely sensed images. These data can provide fine-resolution land cover spatial information and are promising in reducing the SRM uncertainty. This paper presents a spatial–temporal Hopfield neural network (STHNN) based SRM, by employing both a current coarse-resolution image and a previous fine-resolution land cover map as input. STHNN considers the spatial information, as well as the temporal information of sub-pixel pairs by distinguishing the unchanged, decreased and increased land cover fractions in each coarse-resolution pixel, and uses different rules in labeling these sub-pixels. The proposed STHNN method was tested using synthetic images with different class fraction errors and real Landsat images, by comparing with pixel-based classification method and several popular SRM methods including pixel-swapping algorithm, Hopfield neural network based method and sub-pixel land cover change mapping method. Results show that STHNN outperforms pixel-based classification method, pixel-swapping algorithm and Hopfield neural network based model in most cases. The weight parameters of different STHNN spatial constraints, temporal constraints and fraction constraint have important functions in the STHNN performance. The heterogeneity degree of the previous map and the fraction images errors affect the STHNN accuracy, and can be served as guidances of selecting the optimal STHNN weight parameters. 相似文献
13.
遥感反演蒸散发的日尺度扩展方法研究进展 总被引：2，自引：1，他引：1
遥感技术能够提供卫星过境时刻地表参量的瞬时值,进而通过模型构建可反演得到瞬时蒸散发。相对于瞬时蒸散发,日尺度蒸散发在实际生产生活中具有更重要的应用价值。本文系统地总结分析了遥感反演瞬时蒸散发的代表性日尺度扩展方法,包括蒸发比不变法、解耦因子不变法、辐射能量比不变法、参考蒸发比不变法、地表阻抗不变法和数据同化法,并对各方法的基本原理、估算精度、适用性等进行了对比分析。在此基础上,进一步综述了日尺度扩展方法存在的不确定性和主要问题,包括扩展方法本身误差、云覆盖、气象数据获取、夜间蒸散发估算、遥感反演同扩展误差累积及真实性检验等,并指出今后应从加强有云天及夜间蒸散发扩展机理和方法等方面的研究来提升瞬时蒸散发日尺度扩展精度。 相似文献
14.
C. R. Suribabu J. Bhaskar T. R. Neelakantan 《Journal of the Indian Society of Remote Sensing》2012,40(4):699-708
The rapid growth of urban population in India is a cause of concern among country??s urban and town planners for efficient urban planning. The drastic growth of urban areas has resulted in sharp land use and land cover changes. In recent years, the significance of spatial data technologies, especially the application of remotely sensed data and geographical information systems (GIS) has been widely used. The present study investigates the urban growth of Tiruchirapalli city, Tamilnadu using IRS satellite data for the years 1989, 1992, 1995, 1998, 2001, 2004, 2007, and 2010. The eight satellite images are enhanced using convolution spatial enhancement method with Kernel (7?×?7) edge enhance function. Supervised classification method is used to classify the urban land use and land cover. The GIS is used to prepare the different layers belonging to various land uses identified from remotely sensed data. The analysis of the results show the drastic increase of built up area and reduced green cover within the city boundary limit. 相似文献
15.
Field studies were conducted on differentially irrigated wheat (Cv. ‘Sonalika’), on a sandy loam soil at Indian Agricultural Research Institute, New Delhi to evaluate the surface energy balance evapotranspiration (ET) models which use remotely sensed canopy temperature as an input. Four energy balance ET models were used in this study viz. Jackson et. al. (1977) approach; Bartholic et. al. (1970) and stability corrected and uncorrected aerodynamic resistance forms of models. To test the model, ET was estimated using remotely sensed canopy temperatrue, with the remaining to ET measured by water depletion method. Aerodynamic resistance forms of ET models performed well as compared to other models. Results indicate that remotely sensed canopy temperature as an input to surface energy balance models, offers a potential method of estimating ET from a cropped surface. 相似文献
16.
17.
《International Journal of Digital Earth》2013,6(9):725-745
With the rapid development of satellite remote sensing technology and an ever-increasing number of Earth observation satellites being launched, the global volume of remotely sensed imagery has been growing exponentially. Processing the variety of remotely sensed data has increasingly been complex and difficult. It is also hard to efficiently and intelligently retrieve what users need from a massive database of images. This paper introduces an improved support vector machine (SVM) model, which optimizes the model parameters and selects the feature subset based on the particle swarm optimization (PSO) method and genetic algorithm (GA) for remote sensing image retrieval. The results from an image retrieval experiment show that our method outperforms traditional methods such as GRID, PSO, and GA in terms of consistency and stability. 相似文献
18.
19.
《International Journal of Digital Earth》2013,6(4):330-346
Abstract In recent years, the rough set (RS) method has been in common use for remote-sensing classification, which provides one of the techniques of information extraction for Digital Earth. The discretization of remotely sensed data is an important data preprocessing approach in classical RS-based remote-sensing classification. Appropriate discretization methods can improve the adaptability of the classification rules and increase the accuracy of the remote-sensing classification. To assess the performance of discretization methods this article adopts three indicators, which are the compression capability indicator (CCI), consistency indicator (CI), and number of the cut points (NCP). An appropriate discretization method for the RS-based classification of a given remotely sensed image can be found by comparing the values of the three indicators and the classification accuracies of the discretized remotely sensed images obtained with the different discretization methods. To investigate the effectiveness of our method, this article applies three discretization methods of the Entropy/MDL, Naive, and SemiNaive to a TM image and three indicators for these discretization methods are then calculated. After comparing the three indicators and the classification accuracies of the discretized remotely sensed images, it has been found that the SemiNaive method significantly reduces large quantities of data and also keeps satisfactory classification accuracy. 相似文献
20.
均值漂移与卡尔曼滤波相结合的遥感影像道路中心线追踪算法 总被引：1，自引：0，他引：1
基于模板匹配的道路追踪方法是道路提取中较实用的一类方法,但传统模板匹配方法主要以相关系数作为相似性测度,对车辆、树荫等遮挡敏感,不适用于高分辨率遥感影像道路提取。针对这一问题,本文采用一种稳健的相似性测度,设计了一种基于均值漂移的道路中心点匹配算法,克服了传统模板匹配对遮挡敏感的缺点;然后运用卡尔曼滤波,实现高分辨率遥感影像道路中心线追踪。试验表明,该方法能够准确提取高分辨率遥感影像道路中心线,对车辆、树荫等遮挡具有稳健性。 相似文献