首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Allochthonous salt structures and associated primary and secondary minibasins are exposed in Neoproterozoic strata of the eastern Willouran Ranges, South Australia. Detailed geologic mapping using high‐quality airborne hyperspectral remote‐sensing data and satellite imagery, combined with a qualitative structural restoration, are used to elucidate the evolution of this complex, long‐lived (>250 Myr) salt system. Field observations and interpretations at a resolution unobtainable from seismic or well data provide a means to test published models of allochthonous salt emplacement and associated salt‐sediment interaction derived from subsurface data in the northern Gulf of Mexico. Salt diapirs and sheets are represented by megabreccias of nonevaporite lithologies that were originally interbedded with evaporites that have been dissolved and/or altered. Passive diapirism began shortly after deposition of the Callanna Group layered evaporite sequence. A primary basin containing an expulsion‐rollover structure and megaflap is flanked by two vertical diapirs. Salt flowed laterally from the diapirs to form a complex, multi‐level canopy, now partly welded, containing an encapsulated minibasin and capped by suprasalt basins. Salt and minibasin geometries were modified during the Late Cambrian–Ordovician Delamerian Orogeny (ca. 500 Ma). Small‐scale structures such as subsalt shear zones, fractured or mixed ‘rubble zones’ and thrust imbricates are absent beneath allochthonous salt and welds in the eastern Willouran Ranges. Instead, either undeformed strata or halokinetic drape folds that include preserved diapir roof strata are found directly below the transition from steep diapirs to salt sheets. Allochthonous salt first broke through the diapir roofs and then flowed laterally, resulting in variable preservation of the subsalt drape folds. Lateral salt emplacement was presumably on roof‐edge thrusts or, because of the shallow depositional environment, via open‐toed advance or extrusive advance, but without associated subsalt deformation.  相似文献   

2.
Salt canopies are present in many of the worldwide large salt basins and are key players in the basins' structural evolution as well as in the development of associated hydrocarbon systems. This study employs 2D finite‐element models which incorporate the dynamical interaction of viscous salt and frictional‐plastic sediments in a gravity‐spreading system. We investigate the general emplacement of salt canopies that form in the centre of a large, autochthonous salt basin. This is motivated by the potential application to a mid‐basin canopy in the NW Gulf of Mexico (GoM) that developed in the late Eocene. Three different salt expulsion and canopy formation concepts that have been proposed in the salt‐tectonic literature for the GoM are tested. Two of these mechanisms require pre‐existing diapirs as precursory structures. We include their evolution in the models to assure a continuous, smooth evolution of the salt‐sediment system. The most efficient canopy formation takes place under the squeezed diapir mechanism. Here, shortening of a region containing pre‐existing diapirs is absorbed by the salt (the weakest part of the system), which is then expelled onto the seafloor. The expulsion rollover mechanism, which evacuates salt from beneath evolving rollover structures and expels it both laterally and to the surface, was not successfully captured by the numerical models. No rollover structures developed and only minor amounts of allochthonous salt emerged to the seafloor. The breached anticline mechanism requires substantial shortening of salt‐cored, pre‐weakened folds such that the salt breaches the anticlines and is expelled to the seafloor. The amount of shortening may be too large to occur in the central part of a salt basin, but may explain canopy evolution closer to the distal end of the allochthonous salt. When applying the different concepts to the northwestern GoM, none of the models adequately describes the entire system, yet the squeezed diapir mechanism captures most structural features of the Eocene paleocanopy. It is nevertheless possible that different mechanisms have acted in combination or sequentially in the northwestern GoM.  相似文献   

3.
Loading of subsurface salt during accumulation of fluvial strata can result in halokinesis and the growth of salt pillows, walls and diapirs. Such movement may eventually result in the formation of salt‐walled mini‐basins, whose style of architectural infill may be used to infer both the relative rates of salt‐wall growth and sedimentation and the nature of the fluvial‐system response to salt movement. The Salt Anticline Region of the Paradox Basin of SE Utah comprises a series of elongate salt‐walled mini‐basins, arranged in a NW‐trending array. The bulk of salt movement occurred during deposition of the Permian Cutler Group, a wedge of predominantly quartzo‐feldspathic clastic strata comprising sediment derived from the Uncompahgre Uplift to the NE. The sedimentary architecture of selected mini‐basin fills has been determined at high resolution through outcrop study. Mini‐basin centres are characterized by multi‐storey fluvial channel elements arranged into stacked channel complexes, with only limited preservation of overbank elements. At mini‐basin margins, thick successions of fluvial overbank and sheet‐like elements dominate in rim‐syncline depocentres adjacent to salt walls; many such accumulations are unconformably overlain by single‐storey fluvial channel elements that accumulated during episodes of salt‐wall breaching. The absence of gypsum clasts suggests that sediment influx was high, preventing syn‐sedimentary surface exposure of salt. Instead, fluvial breaching of salt‐generated topography reworked previously deposited sediments of the Cutler Group atop growing salt walls. Palaeocurrent data indicate that fluvial palaeoflow to the SW early in the history of basin infill was subsequently diverted to the W and ultimately to the NW as the salt walls grew to form topographic barriers. Late‐stage retreat of the Cutler fluvial system coincided with construction and accumulation of an aeolian system, recording a period of heightened climatic aridity. Aeolian sediments are preserved in the lees of some salt walls, demonstrating that halokinesis played a complex role in the differential trapping of sediment.  相似文献   

4.
An extensive, reprocessed two‐dimensional (2D) seismic data set was utilized together with available well data to study the Tiddlybanken Basin in the southeastern Norwegian Barents Sea, which is revealed to be an excellent example of base salt rift structures, evaporite accumulations and evolution of salt structures. Late Devonian–early Carboniferous NE‐SW regional extensional stress affected the study area and gave rise to three half‐grabens that are separated by a NW‐SE to NNW‐SSE trending horst and an affiliated interference transfer zone. The arcuate nature of the horst is believed to be the effect of pre‐existing Timanian basement grain, whereas the interference zone formed due to the combined effect of a Timanian (basement) lineament and the geometrical arrangement of the opposing master faults. The interference transfer zone acted as a physical barrier, controlling the facies distribution and sedimentary thickness of three‐layered evaporitic sequences (LES). During the late Triassic, the northwestern part of a salt wall was developed due to passive diapirism and its evolution was influenced by halite lithology between the three‐LES. The central and southeastern parts of the salt wall did not progress beyond the pedestal stage due to lack of halite in the deepest evaporitic sequence. During the Triassic–Jurassic transition, far‐field stresses from the Novaya Zemlya fold‐and‐thrust belt reactivated the pre‐salt Carboniferous rift structures. The reactivation led to the development of the Signalhorn Dome, rejuvenated the northwestern part of the salt wall and affected the sedimentation rates in the southeastern broad basin. The salt wall together with the Signalhorn Dome and the Carboniferous pre‐salt structures were again reactivated during post‐Early Cretaceous, in response to regional compressional stresses. During this main tectonic inversion phase, the northwestern and southeastern parts of the salt wall were rejuvenated; however, salt reactivation was minimized towards the interference transfer zone beneath the centre of the salt wall.  相似文献   

5.
Studies of salt‐influenced rift basins have focused on individual or basin‐scale fault system and/or salt‐related structure. In contrast, the large‐scale rift structure, namely rift segments and rift accommodation zones and the role of pre‐rift tectonics in controlling structural style and syn‐rift basin evolution have received less attention. The Norwegian Central Graben, comprises a complex network of sub‐salt normal faults and pre‐rift salt‐related structures that together influenced the structural style and evolution of the Late Jurassic rift. Beneath the halite‐rich, Permian Zechstein Supergroup, the rift can be divided into two major rift segments, each comprising rift margin and rift axis domains, separated by a rift‐wide accommodation zone – the Steinbit Accommodation Zone. Sub‐salt normal faults in the rift segments are generally larger, in terms of fault throw, length and spacing, than those in the accommodation zone. The pre‐rift structure varies laterally from sheet‐like units, with limited salt tectonics, through domains characterised by isolated salt diapirs, to a network of elongate salt walls with intervening minibasins. Analysis of the interactions between the sub‐salt normal fault network and the pre‐rift salt‐related structures reveals six types of syn‐rift depocentres. Increasing the throw and spacing of sub‐salt normal faults from rift segment to rift accommodation zone generally leads to simpler half‐graben geometries and an increase in the size and thickness of syn‐rift depocentres. In contrast, more complex pre‐rift salt tectonics increases the mechanical heterogeneity of the pre‐rift, leading to increased complexity of structural style. Along the rift margin, syn‐rift depocentres occur as interpods above salt walls and are generally unrelated to the relatively minor sub‐salt normal faults in this structural domain. Along the rift axis, deformation associated with large sub‐salt normal faults created coupled and decoupled supra‐salt faults. Tilting of the hanging wall associated with growth of the large normal faults along the rift axis also promoted a thin‐skinned, gravity‐driven deformation leading to a range of extensional and compressional structures affecting the syn‐rift interval. The Steinbit Accommodation Zone contains rift‐related structural styles that encompass elements seen along both the rift margin and axis. The wide variability in structural style and evolution of syn‐rift depocentres recognised in this study has implications for the geomorphological evolution of rifts, sediment routing systems and stratigraphic evolution in rifts that contain pre‐rift salt units.  相似文献   

6.
《Basin Research》2018,30(Z1):336-362
The subsidence evolution of the Tethyan Moroccan Atlas Basin, presently inverted as the Central High Atlas, is characterized by an Early Jurassic rifting episode, synchronous with salt diapirism of the Triassic evaporite‐bearing rocks. Two contrasting regions of the rift basin – with and without salt diapirism – are examined to assess the effect of salt tectonics in the evolution of subsidence patterns and stratigraphy. The Djebel Bou Dahar platform to basin system, located in the southern margin of the Atlas Basin, shows a Lower Jurassic record of normal faulting and lacks any evidence of salt diapirism. In contrast, the Tazoult ridge and adjacent Amezraï basin, located in the centre of the Atlas Basin, reveals spectacular Early Jurassic diapirism. In addition, we analyse alternative Central High Atlas post‐Middle Jurassic geohistories based on new thermal and burial models (GENEX® 4.0.3 software), constrained by new vitrinite reflectance data from the Amezraï basin. The comparison of the new subsidence curves from the studied areas with published subsidence curves from the Moroccan Atlas, the Saharan Atlas (Algeria) and Tunisian Atlas show that fast subsidence peaks were diachronous along the strike, being younger towards the east from Early–Middle Jurassic to Late Cretaceous. This analysis also evidences a close relationship between these high subsidence rate episodes and salt diapirism.  相似文献   

7.
The northern Paradox Basin evolved during the Late Pennsylvanian–Permian as an immobile foreland basin, the result of flexural subsidence in the footwall of the growing Uncompahgre Ancestral Rocky Mountain thick‐skinned uplift. During the Atokan‐Desmoinesian (～313–306 Ma) fluctuating glacio‐eustatic sea levels deposited an ～2500 m thick sequence of evaporites (Paradox Formation) in the foreland basin, interfingering with coarse clastics in the foredeep and carbonates around the basin margins. The cyclic deposition of the evaporites produced a repetitive sequence of primarily halite, with minor clastics, organic shales and anhydrite. Sediment loading of the evaporites subsequently produced a series of salt walls and minibasins, through the process of passive diapirism or downbuilding. Faults at the top Mississippian level localised the development of linear salt walls (up to 4500 m high) along a NW–SE trend. A crosscutting NE–SW structural trend was also important in controlling the evaporite facies and the abrupt termination of the salt walls. Seismic, well and field data define the proximal Cutler Group (Permian) as a basinward prograding sequence derived from the growing Uncompahgre uplift that drove salt basinwards (towards the southwest), triggering the growth of the salt walls. Sequential structural restorations indicate that the most proximal salt walls evolved earlier than the more distal ones. The successive development of salt‐withdrawal minibasins associated with each growing salt wall implies that parts of the Cutler Group in one minibasin may have no chronostratigraphic equivalent in other minibasins. Localised changes in along‐strike salt wall growth and evolution were critical in the development of facies and thickness variations in the late Pennsylvanian to Triassic stratigraphic sequences in the flanking minibasins. Salt was probably at or very close to the surface during the downbuilding process leading to localised thinning, deposition of diapir‐derived detritus and rapid facies changes in sequences adjacent to the salt wall structures.  相似文献   

8.
In this paper, a literature‐based compilation of the timing and history of salt tectonics in the Southern Permian Basin (Central Europe) is presented. The tectono‐stratigraphic evolution of the Southern Permian Basin is influenced by salt movement and the structural development of various types of salt structures. The compilation presented here was used to characterize the following syndepositional growth stages of the salt structures: (a) “phase of initiation”; (b) phase of fastest growth (“main activity”); and (c) phase of burial’. We have also mapped the spatial pattern of potential mechanisms that triggered the initiation of salt structures over the area studied and summarized them for distinct regions (sub‐basins, platforms, etc.). The data base compiled and the set of maps produced from it provide a detailed overview of the spatial and temporal distribution of salt tectonic activity enabling the correlation of tectonic phases between specific regions of the entire Southern Permian Basin. Accordingly, salt movements were initiated in deeply subsided graben structures and fault zones during the Early and Middle Triassic. In these areas, salt structures reached their phase of main activity already during the Late Triassic or the Jurassic and were mostly buried during the Early Cretaceous. Salt structures in less subsided sub‐basins and platform regions of the Southern Permian Basin mostly started to grow during the Late Triassic. The subsequent phase of main activity of these salt structures took place from the Late Cretaceous to the Cenozoic. The analysis of the trigger mechanisms revealed that most salt structures were initiated by large‐offset normal faults in the sub‐salt basement in the large graben structures and minor normal faulting associated with thin‐skinned extension in the less subsided basin parts.  相似文献   

9.
Axel Heiberg Island (Arctic Archipelago, northern Nunavut, Canada) contains the thickest Mesozoic section in Sverdrup Basin (11 km). The ca. 370‐km‐long island is second only to Iran in its concentration of exposed evaporite diapirs. Forty‐six diapirs of Carboniferous evaporites and associated minibasins are excellently exposed on the island. Regional anticlines, which formed during Paleogene Eurekan orogeny, trend roughly north on a regular ca. 20‐km wavelength and probably detach on autochthonous Carboniferous Otto Fiord Formation evaporites comprising halite overlain by thick anhydrite. In contrast, a 60‐km‐wide area, known as the wall‐and‐basin structure (WABS) province, has bimodal fold trends and irregular (<10 km) wavelengths. Here, crooked, narrow diapirs of superficially gypsified anhydrite crop out in tight anticline cores, which are separated by wider synclinal minibasins. We interpret the WABS province to detach on a shallow, partly exposed canopy of coalesced allochthonous evaporite sheets. Surrounding strata record a salt‐tectonic history spanning the Late Triassic (Norian) to the Paleogene. Stratigraphic thinning against diapirs and spectacular angular unconformities indicate mild regional shortening in which diapiric roof strata were bulged up and flanking strata steepened. This bulging culminated in the Hauterivian, when diapiric evaporites broke out and coalesced to form a canopy. As the inferred canopy was buried, it yielded second‐generation diapirs, which rose between minibasins subsiding into the canopy. Consistent high level emplacement suggests that all exposed diapirs inside the WABS area rose from the canopy. In contrast, diapirs along the WABS margins were sourced in autochthonous salt as first‐generation diapirs. Apart from the large diapir‐flanking unconformities, Jurassic‐Cretaceous depositional evidence of salt tectonics also includes submarine debris flows and boulder conglomerates shed from at least three emergent diapirs. Extreme local relief, tectonic slide blocks, steep talus fans and subaerial debris flows suggest that many WABS diapirs continue to rise today. The Axel Heiberg canopy is one of only three known exposed evaporite canopies, each inferred or known at a different structural level: above the canopy (Axel Heiberg), through the canopy (Great Kavir) and beneath a possible canopy (Sivas).  相似文献   

10.
Salt tectonics is an important part of the geological evolution of many continental margins, yet the four-dimensional evolution of the minibasins, the fundamental building block of these and many other salt basins, remains poorly understood. Using high-quality 3D seismic data from the Lower Congo Basin, offshore Angola we document the long-term (>70 Myr) dynamics of minibasin subsidence. We show that, during the Albian, a broadly tabular layer of carbonate was deposited prior to substantial salt flow, diapirism, and minibasin formation. We identify four subsequent stages of salt-tectonics and related minibasin evolution: (i) thin-skinned extension (Cenomanian to Coniacian) driven by basinward tilting of the salt layer, resulting in the formation of low-displacement normal faults and related salt rollers. During this stage, local salt welding led to the along-strike migration of fault-bound depocentres; (ii) salt welding below the eastern part of the minibasin (Santonian to Paleocene), causing a westward shift in depocentre location; (iii) welding below the minibasin centre (Eocene to Oligocene), resulting in the formation of a turtle and an abrupt shift of depocentres towards the flanks of the bounding salt walls; and (iv) an eastward shift in depocentre location due to regional tilting, contraction, and diapir squeezing (Miocene to Holocene). Our study shows that salt welding and subsequent contraction are key controls on minibasin geometry, subsidence and stratigraphic patterns. In particular, we show how salt welding is a protracted process, spanning > 70 Myr of the salt-tectonic history of this, and likely other salt-rich basins. The progressive migration of minibasin depocentres, and the associated stratigraphic architecture, record weld dynamics. Our study has implications for the tectono-stratigraphic evolution of minibasins.  相似文献   

11.
At many continental margins, differential sediment loading on an underlying salt layer drives salt deformation and has a significant impact on the structural evolution of the basin. We use 2‐D finite‐element modelling to investigate systems in which a linear viscous salt layer underlies a frictional‐plastic overburden of laterally varying thickness. In these systems, differential pressure induces the flow of viscous salt, and the overburden experiences updip deviatoric tension and downdip compression. A thin‐sheet analytical stability criterion for the system is derived and is used to predict conditions under which the sedimentary overburden will be unstable and fail, and to estimate the initial velocities of the system. The analytical predictions are in acceptable agreement with initial velocity patterns of the numerical models. In addition to initial stability analyses, the numerical model is used to investigate the subsequent finite deformation. As the systems evolve, overburden extension and salt diapirism occur in the landward section and contractional structures develop in the seaward section. The system evolution depends on the relative widths of the salt basin and the length scale of the overburden thickness variation. In narrow salt basins, overburden deformation is localised and characterised by high strain rates, which cause the system to reach a gravitational equilibrium and salt movement to cease earlier than for wide salt basins. Sedimentation enhances salt evacuation by maintaining a differential pressure in the salt. Continued sedimentary filling of landward extensional basins suppresses landward salt diapirism. Sediment progradation leads to seaward propagation of the landward extensional structures and depocentres. At slow sediment progradation rates, the viscous flow can be faster than the sediment progradation, leading to efficient salt evacuation and salt weld formation beneath the landward section. Fast sediment progradation suppresses the viscous flow, leaving salt pillows beneath the prograding wedge.  相似文献   

12.
Regionally extensive 3D seismic data from the Lower Congo Basin, offshore Angola, have been used to investigate the influence of salt‐related structures on the location, geometry and evolution of Miocene deep‐water depositional systems. Isochron variations and cross‐sectional lap‐out relationships have then been used to qualitatively reconstruct the syn‐depositional morphology of salt‐cored structures. Coherence and Red‐green‐blue‐blended spectral decomposition volumes, tied to cross‐sectional seismic facies, allow imaging of the main sediment transport pathways and the distribution of their component seismic facies. Major sediment transport pathways developed in an area of complex salt‐related structures comprising normal faults, isolated diapirs and elongate salt walls with intervening intraslope basins. Key structural controls on the location of the main sediment transport pathways and the local interaction between lobe‐channel‐levee systems and individual structures were the length and height of structures, the location and geometry of segment boundaries, the growth and linkage of individual structures, and the incidence angle between structural strike and flow direction. Where the regional flow direction was at a high angle to structural strike, transport pathways passed progressively through multiple intraslope basins in a fill and spill manner. Segment boundaries and structural lows between diapirs acted as spill points, focusing sediment transport between intraslope basins. Channel–lobe transitions are commonly associated with these spill points, where flows expanded and entered depocentres. Deflection of channel‐levee complexes around individual structures was mainly controlled by the length of structures and incidence angle. Where regional flow direction was at a low angle to structural strike, sediment transport pathways ran parallel to structure and were confined to individual intraslope basins for many tens of kilometres. Spill between intraslope basins was rare. The relative position of structures and their segment boundaries was fixed during the Miocene, which effectively pinned the locations where sediment spilled from one intraslope basin to the next. As a result, major sediment transport pathways were used repeatedly, giving rise to vertically stacked lobe‐channel‐levee complexes along the pathways. Shadow zones devoid of coarse clastics developed in areas that were either structurally isolated from the sediment transport pathways or bypassed as a result of channel diversion.  相似文献   

13.
  相似文献   

14.
The Triassic Moenkopi Formation in the Salt Anticline Region, SE Utah, represents the preserved record of a low‐relief ephemeral fluvial system that accumulated in a series of actively subsiding salt‐walled mini‐basins. Development and evolution of the fluvial system and its resultant preserved architecture was controlled by the following: (1) the inherited state of the basin geometry at the time of commencement of sedimentation; (2) the rate of sediment delivery to the developing basins; (3) the orientation of fluvial pathways relative to the salt walls that bounded the basins; (4) spatially and temporally variable rates and styles of mini‐basin subsidence and associated salt‐wall uplift; and (5) temporal changes in regional climate. Detailed outcrop‐based tectono‐stratigraphic analyses demonstrate how three coevally developing mini‐basins and their intervening salt walls evolved in response to progressive sediment loading of a succession of Pennsylvanian salt (the Paradox Formation) by the younger Moenkopi Formation, deposits of which record a dryland fluvial system in which flow was primarily directed parallel to a series of elongate salt walls. In some mini‐basins, fluvial channel elements are stacked vertically within and along the central basin axes, in response to preferential salt withdrawal and resulting subsidence. In other basins, rim synclines have developed adjacent to bounding salt walls and these served as loci for accumulation of stacked fluvial channel complexes. Neighbouring mini‐basins exhibit different styles of infill at equivalent stratigraphic levels: sand‐poor basins dominated by fine‐grained, sheet‐like sandstone fluvial elements, which are representative of nonchannelised flow processes, apparently developed synchronously with neighbouring sand‐prone basins dominated by major fluvial channel‐belts, demonstrating effective partitioning of sediment route‐ways by surface topography generated by uplifting salt walls. Reworked gypsum clasts present in parts of the stratigraphy demonstrate the subaerial exposure of some salt walls, and their partial erosion and reworking into the fill of adjoining mini‐basins during accumulation of the Moenkopi Formation. Complex spatial changes in preserved stratigraphic thickness of four members in the Moenkopi Formation, both within and between mini‐basins, demonstrates a complex relationship between the location and timing of subsidence and the infill of the generated accommodation by fluvial processes.  相似文献   

15.
Base-salt relief influences salt flow, producing three-dimensionally complex strains and multiphase deformation within the salt and its overburden. Understanding how base-salt relief influences salt-related deformation is important to correctly interpret salt basin kinematics and distribution of structural domains, which have important implications to understand the development of key petroleum system elements. The São Paulo Plateau, Santos Basin, Brazil is characterized by a >2 km thick, mechanically layered Aptian salt layer deposited above prominent base-salt relief. We use 3D seismic reflection data, and physical and conceptual kinematic models to investigate how gravity-driven translation above thick salt, underlain by complex base-salt relief, generated a complex framework of salt structures and minibasins. We show that ramp-syncline basins developed above and downdip of the main pre-salt highs record c. 30 km of Late Cretaceous-Paleocene basinward translation. As salt and overburden translated downdip, salt flux variations caused by the base-salt relief resulted in non-uniform motion of the cover, and the simultaneous development of extensional and contractional structures. Contraction preferentially occurred where salt flow locally decelerated, above landward-dipping base-salt and downdip of basinward-dipping ramps. Extension occurred at the top of basinward-dipping ramps and base-salt plateaus, where salt flow locally accelerated. Where the base of the salt layer was broadly flat, structures evolved primarily by load-driven passive diapirism. At the edge of or around smaller base-salt highs, salt structures were affected by plan-view rotation, shearing and divergent flow. The magnitude of translation (c. 30 km) and the style of salt-related deformation observed on the São Paulo Plateau afford an improved kinematic model for the enigmatic Albian Gap, suggesting this structure formed by a combination of basinward salt expulsion and regional extension. These observations contribute to the long-lived debate regarding the mechanisms of salt tectonics on the São Paulo Plateau, ultimately improving our general understanding of the effects of base-salt relief on salt tectonics in other basins.  相似文献   

16.
We used seven scaled physical models to explore the near‐surface structural evolution of shallowly buried, actively rising salt stocks. The models consisted of dry sand, ceramic microspheres and silicone. Previously dormant stocks rose because of lateral squeezing or pumping of salt from below. The pressure of rising salt created a dynamic bulge in the crest of the diapir, which arched the overlying roof sediments. Eventually this dynamic bulge collapsed and its overlying roof broke into rafts along subradial grabens. The rafts were dispersed outwards by shear traction of spreading salt, surmounting an upturned collar of country rock and eventually grounding at the front of the extrusive flow. Flow of salt around these stranded fragments created a lobate extrusion front, common in submarine salt sheets in the Gulf of Mexico and subaerial salt glaciers in Iran. Stock geometry, regional dip and roof density affected extrusion rates and spreading directions. Stocks leaning seaward extruded salt faster and farther than did upright stocks. Dense roofs foundered and plugged the vent, limiting surface extrusion. In tilted models, broad salt sheets spread asymmetrically downslope. Stock contents were inverted within the extruded salt sheet: successively deeper parts of the stock's core rose to the surface and overran salt extruded from the shallower parts of the diapir. As shortening continued, salt from the source layer reached the surface after being driven out by thrusting. A central thrust block, or primary indenter, moved ahead of surrounding thrust blocks, impinging against and squeezing the stock into an elliptical planform. After high shortening, secondary indenters converged obliquely into the salt stock, expelling salt from the periphery of the diapir. The models shed light on (1) the origin and fate of large rafts or carapace blocks atop allochthonous salt, (2) cuspate margins of salt sheets and (3) interaction of thrusting, diapir pinch‐off and emplacement of allochthonous salt sheets.  相似文献   

17.
After Mesozoic rifting, the Atlantic margin of Morocco has recorded the consequences of the continental collision between Africa and Europe and the relative northward motion of the African plate over the Canary Island hotspot during Cenozoic times. Interpretation of recently acquired 2D seismic reflection data (MIRROR 2011 experiment) presents new insights into the Late Cretaceous to recent geodynamic evolution of this margin. Crustal uplift presumably started during the Late Cretaceous and triggered regional tilting in the deep‐water margin west of Essaouira and the formation of the Base Tertiary Unconformity (BTU). An associated hiatus in sedimentation is interpreted to have started earlier in the north (presumably in the Cenomanian at well location DSDP 416) and propagated to the south (presumably in the Coniacian at well location DSDP 415). The difference in the total duration of this hiatus is postulated to have controlled the extrusion of Late Triassic to Early Jurassic salt during the Late Cretaceous to Early Palaeocene non‐depositional period, resulting in regional differences in the preservation of salt structures: the Agadir Basin in the south of the study area is dominated by salt diapirs, whereas massive canopies characterised the Ras Tafelnay Plateau farther north and salt‐poor canopies and weld structures the northernmost offshore Essaouira and Safi Basins. Accompanied by volcanic intrusions, a presumably Early Palaeogene reactivation of previously existing basement faults is interpreted to have formed a series of deep‐water anticlines with associated gravity deformation of shallow‐seated sediments. The orientation of the fold axes is roughly perpendicular to the present day coast and the extensional fault direction; therefore, not a coast‐line parallel pattern of extensional faults, related to the rifting and break‐up of the margin, but rather a coast‐line perpendicular oceanic fracture zone might have caused the basement faults associated with the deep‐water folds. Both the volcanic intrusions and the formation of the deep‐water anticlines show a comparable age trend which gets progressively younger towards the south. A potential tempo‐spatial relationship of the BTU and the reactivation of basement faults can be explained by the relative northward motion of the African plate over the Canary Island hotspot. Regional uplift producing the BTU could have been the precursor of the approaching hotspot during the Late Cretaceous, followed during the Early Palaeogene by a locally more pronounced uplift above the hotspot centre.  相似文献   

18.
“Salt” giants are typically halite‐dominated, although they invariably contain other evaporite (e.g. anhydrite, bittern salts) and non‐evaporite (e.g. carbonate, clastic) rocks. Rheological differences between these rocks mean they impact or respond to rift‐related, upper crustal deformation in different ways. Our understanding of basin‐scale lithology variations in ancient salt giants, what controls this and how this impacts later rift‐related deformation, is poor, principally due to a lack of subsurface datasets of sufficiently regional extent. Here we use 2D seismic reflection and borehole data from offshore Norway to map compositional variations within the Zechstein Supergroup (ZSG) (Lopingian), relating this to the structural styles developed during Middle Jurassic‐to‐Early Cretaceous rifting. Based on the proportion of halite, we identify and map four intrasalt depositional zones (sensu Clark et al., Journal of the Geological Society, 1998, 155, 663) offshore Norway. We show that, at the basin margins, the ZSG is carbonate‐dominated, whereas towards the basin centre, it becomes increasingly halite‐dominated, a trend observed in the UK sector of the North Sea Basin and in other ancient salt giants. However, we also document abrupt, large magnitude compositional and thickness variations adjacent to large, intra‐basin normal faults; for example, thin, carbonate‐dominated successions occur on fault‐bounded footwall highs, whereas thick, halite‐dominated successions occur only a few kilometres away in adjacent depocentres. It is presently unclear if this variability reflects variations in syn‐depositional relief related to flooding of an underfilled presalt (Early Permian) rift or syn‐depositional (Lopingian) rift‐related faulting. Irrespective of the underlying controls, variations in salt composition and thickness influenced the Middle Jurassic‐to‐Early Cretaceous rift structural style, with diapirism characterising hangingwall basins where autochthonous salt was thick and halite‐rich and salt‐detached normal faulting occurring on the basin margins and on intra‐basin structural highs where the salt was too thin and/or halite‐poor to undergo diapirism. This variability is currently not captured by existing tectono‐stratigraphic models largely based on observations from salt‐free rifts and, we argue, mapping of suprasalt structural styles may provide insights into salt composition and thickness in areas where boreholes are lacking or seismic imaging is poor.  相似文献   

19.
We investigate the evolution of passive continental margin sedimentary basins that contain salt through two‐dimensional (2D) analytical failure analysis and plane‐strain finite‐element modelling. We expand an earlier analytical failure analysis of a sedimentary basin/salt system at a passive continental margin to include the effects of submarine water loading and pore fluid pressure. Seaward thinning sediments above a weak salt layer produce a pressure gradient that induces Poiseuille flow in the viscous salt. We determine the circumstances under which failure at the head and toe of the frictional–plastic sediment wedge occurs, resulting in translation of the wedge, landward extension and seaward contraction, accompanied by Couette flow in the underlying salt. The effects of water: (i) increase solid and fluid pressures in the sediments; (ii) reduce the head to toe differential pressure in the salt and (iii) act as a buttress to oppose failure and translation of the sediment wedge. The magnitude of the translation velocity upon failure is reduced by the effects of water. The subsequent deformation is investigated using a 2D finite‐element model that includes the effects of the submarine setting and hydrostatic pore pressures. The model quantitatively simulates a 2D approximation of the evolution of natural sedimentary basins on continental margins that are formed above salt. Sediment progradation above a viscous salt layer results in formation of landward extensional basins and listric normal growth faults as well as seaward contraction. At a later stage, an allochthonous salt nappe overthrusts the autochthonous limit of the salt. The nature and distribution of major structures depends on the sediment properties and the sedimentation pattern. Strain weakening of sediment favours landward listric growth faults with formation of asymmetric extensional depocentres. Episodes of low sediment influx, with partial infill of depocentres, produce local pressure gradients in the salt that result in diapirism. Diapirs grow passively during sediment aggradation.  相似文献   

20.
The synkinematic strata of the Kuqa foreland basin record a rich history of Cenozoic reactivation of the Palaeozoic Tian Shan mountain belt. Here, we present new constraints on the history of deformation in the southern Tian Shan, based on an analysis of interactions between tectonics and sedimentation in the western Kuqa basin. We constructed six balanced cross‐sections of the basin, integrating surface geology, well data and a grid of seismic reflection profiles. These profiles show that the Qiulitage fold belt on the southern edge of the Kuqa basin developed by thin‐skinned compression salt tectonics. The structural styles have been influenced by two major factors: the nature of early‐formed diapirs and the basinward depositional limit of the Kumugeliemu salt. Several early diapirs developed in the western Kuqa basin, soon after salt deposition, which acted to localize the subsequent shortening. Where diapirs had low relief and a thick overburden they tended to tighten into salt domes 3000–7000 m in height. Conversely, where the original diapirs had higher relief and a thinner overburden they tended to evolve into salt nappes, with the northern flanks of the diapirs thrusting over their southern flanks. Salt was expelled forward, up dip along the mother salt layer, tended to accumulate at the distal pinch‐out of Kumugeliemu salt located at the Qiulitage fold belt. Furthermore, the synkinematic strata (6–8 km thick) of the Kuqa basin indicate that during the Cenozoic reactivation of the Tian Shan, shortening of the western Kuqa basin was mainly in the hinterland until the early Miocene. Then, compression spread simultaneously southwards to the Dawanqi anticline, the Qiulitage fold belt and the southernmost blind detachment fold at the end of Miocene. The western Kuqa basin has a shortening of ca. 23 km. We consider that ca. 9 km was consumed from the end of the Miocene (5.2/5.8 Ma) to the early Pleistocene (2.58 Ma) and another ca. 14 km have been absorbed since then. Thus, we obtain a ca. 3.4/2.8 mm year?1 average shortening from 5.2/5.8 to 2.58 Ma, followed by a 60–90% increase in average shortening rate to ca. 5.4 mm year?1 since 2.58 Ma. This suggests that the reactivation of the modern Tian Shan has been accelerating up to the present day.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号