首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 730 毫秒
1.
Facies relationships in Pleistocene braided outwash deposits in southern Ontario demonstrate the presence of a large braid bar with adjacent side channel. The core of the bar is up to 6 m high, and consists of crudely horizontally stratified gravels. Downstream from the core is the bar front facies, consisting of large gravelly foresets up to 4 m high, rounded off in many places by reactivation surfaces. Upstream from the core is the bar stoss side facies consisting of several sets (individually up to 35 cm thick) of tabular cross-bedding, arranged in coarsening-upward sequences. The stoss side—core—bar front relationships are continuously exposed in one 400 m long quarry face which is cut almost parallel to the palaeoflow direction. A transverse quarry face shows the side channel facies, which consists of trough cross-bedded sands. Gravel layers can be seen to finger from the main gravelly bar into the sandy side channel, but they do not reach the base of the channel. This surprising relationship indicates that gravel moved only in the topographically higher parts of the system. After deposition in the side channel, and growth upstream and downstream from the bar core, the entire system aggraded. Crudely horizontally stratified, and imbricated gravel sheets were laid down as a bar top facies. Grain size analyses indicate strongly bimodal distributions, implying that much of the sand in the spaces between pebbles and boulders filtered in after the gravel had been deposited. This interpretation is strengthened by velocity calculations—mean velocities in excess of 300 cm/s would be needed to roll the gravel as bed load, but at such a velocity, a large amount of sand would be transported entirely in suspension. In a final section of the paper, our results are combined with other work on braided systems in an attempt to formulate a more general facies model.  相似文献   

2.
Meltwater flows emanating from the Pyrenees during the Pleistocene constructed a braided outwash plain in the Ebro Basin and led to the karstification of the Neogene gypsum bedrock. Synsedimentary evaporite dissolution locally increased subsidence rates and generated dolines and collapses that enabled the accumulation and preservation of outwash gravels and associated windblown deposits that were protected from erosion by later meltwater flows. In these localized depocentres, maximum rates of wind deceleration resulted from airflow expansion, enabling the accumulation of cross‐stratified sets of aeolian strata climbing at steep angles and thereby preserving up to 5 m thick sets. The outwash plain was characterized by longitudinal and transverse fluvial gravel bars, channels and windblown facies organized into aeolian sand sheets, transverse and complex aeolian dunes, and loess accumulations. Flat‐lying aeolian deposits merge laterally to partly deformed aeolian deposits encased in dolines and collapses. Synsedimentary evaporite dissolution caused gravels and aeolian sand deposits to subside, such that formerly near‐horizontal strata became inclined and generated multiple internal angular unconformities. During episodes when the wind was undersaturated with respect to its potential sand transporting capacity, deflation occurred over the outwash plain and coarse‐grained lags with ventifacts developed. Subsequent high‐energy flows episodically reached the aeolian dune field, leading to dune destruction and the generation of hyperconcentrated flow deposits composed in part of reworked aeolian sands. Lacustrine deposits in the distal part of the outwash plain preserve rhythmically laminated lutites and associated Gilbert‐type gravel deltas, which developed when fluvial streams reached proglacial lakes. This study documents the first evidence of an extensive Pleistocene proglacial aeolian dune field located in the Ebro Basin (41˙50° N), south of what has hitherto been considered to be the southern boundary of Pleistocene aeolian deposits in Europe. A non‐conventional mechanism (evaporite karst‐related subsidence) for the preservation of aeolian sands in the stratigraphic record is proposed.  相似文献   

3.
ABSTRACT The early Pleistocene Laguna and Turlock Lake Formations and China Hat and Arroyo Seco Gravels along the east side of the San Joaquin Valley, California, were deposited in alluvial fans and marginal lakes. Upward-coarsening sequences of silt-sand-gravel record westward progradation of glacial outwash fans from the Sierra Nevada into proglacial lakes in the San Joaquin Valley. Distinctive sedimentary features delineate lacustrine, prodelta, and delta-front facies within fan-margin deposits and lower, middle, and upper-fan facies within alluvial-fan deposits. The lacustrine facies consists of a few metres of thinly and evenly bedded, rhythmically laminated claystone and clayey siltstone in varved couplets. Draped lamination, sinusoidal lamination, and load and pillar structures occur in some beds. Siltstone and claystone grade upward to slightly thicker wavy beds of siltstone and very fine-grained unconsolidated sand deposited in a prodelta setting. Convolute laminae within deformed steeply dipping foreset beds suggest slumping on the prodelta slope. The prodelta facies grades up to the delta-front facies, which consists of burrowed and bioturbated cross-bedded fine sand. Deltaic deposits are 5–6 m thick. The lower-fan facies forms the base of the fan sequence and consists of several metres of irregularly bedded, laminated, oxidized siltstone and fine sand. The middle-fan facies consists of cross-bedded, medium-grained to gravelly sand-filled channels cut into the lower-fan facies. Interbedded lens-shaped siltstone beds 2 m thick and several metres across were deposited in abandoned channels. The upper-fan facies consists of moderately to strongly weathered clayey gravel and sand containing pebble imbrication and crude stratification. Argillization during post-depositional soil formation has blurred the distinction between mud-supported debris-flow deposits and clast-supported channel deposits, but both are present in this facies. The deposits described here demonstrate the need for additional fan models in order to incorporate the variety of deposits developed in alluvial fan sequences deposited in humid climates. In previous models based on arctic fans, debris flows, abandoned channels, or widespread siltstone beds are not present in fan sequences, nor are marginal lacustrine and deltaic deposits well represented.  相似文献   

4.
利用高分辨率三维地震资料分析了孟加拉扇上扇某区块的深水沉积体特征。发现了六种典型地震相:下切充填相、海鸥翼状相、楔形发散相、透明相、强振幅平行相和弱振幅平行相。下切充填相代表粗粒的水道充填沉积;海鸥翼状相代表水道-天然堤复合体;楔形发散相代表细粒的天然堤沉积;透明相代表块体搬运沉积;强振幅平行相代表朵叶体沉积;弱振幅平行相代表深海披覆沉积。通过对典型地震剖面特征和平面属性分布分析可知:上扇垂向上依次沉积了朵叶体、水道和堤岸、朵叶体、水道-天然堤复合体。  相似文献   

5.
The Cretaceous Uhangri Formation, SW Korea: lacustrine margin facies   总被引：1，自引：0，他引：1  
The Uhangri Formation forms part of the Cretaceous sedimentary sequence deposited in a series of inland basins in the south-western Korean Peninsula. It comprises an approximately 400-m-thick epiclastic sequence of conglomerate, (gravelly) sandstone, cherty mudstone and black shale. The entire sequence can be represented by 16 distinctive sedimentary facies organized into four facies associations. Facies association I is characterized by thick homogeneous brownish siltstone, wedge-shaped disorganized conglomerate and thinly interlayered gravelly sandstone units. The siltstone units were formed by large floods submerging the alluvial fan fringe (floodplain), whereas the conglomerate and gravelly sandstone units were deposited by sheetfloods and debris flows. Facies association II consists of stratified conglomerate — gravelly sandstone, laminated sandstone and sandstone/siltstone couplets which form fining-upward cycles. Some facies units are low-angle trough cross-bedded and show broad channel geometries. This association represents subaqueous delta lobes fed by high- and low-concentration turbidity currents in the distal delta realm. Facies association III is characterized, by wedged conglomerate and gravelly sandstone facies with interfingered massive sandstone bounded by scoured bases. It represents a delta front where distributary channels and mouth bars are dominant. Facies association IV consists of laterally continuous sequence of laminated black shale, crudely stratified sandstone and convoluted sandstone/cherty mudstone. This facies association is suggestive of depositional processes controlled by chemical equilibrium resulting from an interaction between density inflows and lake water. The cherty mudstone resulted from inorganic precipitation from siliceous solution provided by acidic volcanism. The Uhangri sequence generally shows a fining-upward trend with a transition from alluvial fan fringe, coarse-grained subaqueous delta, to shallow lake. The retrogradation was probably due to continuous subsidence related to continental rifting in the oblique-slip mobile zone.  相似文献   

6.
A cross-section of fluvial gravel deposits of late Pleistocene age exposed at Po Chue Tam, Lantau Island, Hong Kong contains two facies: a lower facies of planar cross-bedded gravel (Gp) and an overlying facies of clast-supported, massive gravels (Gcm). The Gp gravels include five gravel couplets. Each couplet consists of a clast-supported, coarse gravel-dominated bed and an overlying clast-supported, fine gravel-dominated bed with a discrete bounding surface. Tectonic uplift predating the last interglacial transgression produced a large amount of detritus in the source area. Excessive peak rainfall intensity resulting from enhanced seasonality of monsoonal precipitation in the following glacial period triggered catastrophic floods, which transported mature detritus in large quantities into a fault-controlled piedmont basin. The Gp gravels were deposited by pulsating flood flows. In relation to kinematic waves of particles, bedload sediment was longitudinally sorted and segregated into a train of gravel sheets. They draped over each other and accreted laterally due to expansion of flow, producing planar cross stratifications that are characteristic of recurrent, couplet-style coarse/fine cross beds. In contrast, Gcm gravels were laid down as a single, nearly horizontal bed by a catastrophic flood that was not subject to flow pulsation.  相似文献   

7.
Five coarsening upward shallow marine sandstone sequences (2–10 m thick), are described from the late Precambrian of North Norway, where they occur in a laterally continuous and tectonically undeformed outcrop. The sequences consist of five facies with distinct assemblages of sedimentary structures and palaeocurrent patterns. Each facies is the product of alternate phases of sedimentation during relatively high- and low-energy periods. Facies 1 to 4 are interpreted as representing prograding, subtidal sand bars. Sand bar progradation occurred during the highest energy periods when unidirectional currents flowed to the northwest, depositing trough cross-bedded sandstones (facies 3 and 4) on the bar crests and flanks, and sheet sandstone beds (facies 1 and 2) in the offshore environments. Weaker northwesterly flowing currents continued during moderate energy fair weather periods. Low energy fair weather periods were dominated by wave processes, which formed largescale, low-angle, westerly inclined surfaces on the bar flanks (facies 4) and wave rippled sandstone beds (facies 2) and flat laminated siltstone layers (facies 1) in the offshore environments. One sand bar was dissected by channels and infilled by tabular cross-bedded sandstones (facies 5). Bipolar palaeocurrent evidence, with two modes separated into two laterally equivalent channel systems, suggests deposition by tidal currents in mutually evasive ebb and flood channels. The inferred processes of these sand bars are compared with those associated with modern storm-generated and tidal current generated linear sand ridges. Both are influenced by the interaction of relatively low and high energy conditions. The presence of the tidal channel facies, however, combined with the inferred strong bottom current regime, is more analogous to a tidal current hydraulic regime.  相似文献   

8.
Sedimentary rocks of the Solomon Islands-Bougainville Arc are described in terms of nine widespread facies. Four facies associations are recognised by grouping facies which developed in broadly similar sedimentary environments.A marine pelagic association of Early Cretaceous to Miocene rocks comprises three facies. Facies Al: Early Cretaceous siliceous mudstone, found only on Malaita, is interpreted as deep marine siliceous ooze. Facies A2: Early Cretaceous to Eocene limestone with chert, overlies the siliceous mudstone facies, and is widespread in the central and eastern Solomons. It represents lithified calcareous ooze. Facies A3: Oligocene to Miocene calcisiltite with thin tuffaceous beds, overlies Facies A2 in most areas, and also occurs in the western Solomons. This represents similar, but less lithified calcareous ooze, and the deposits of periodic andesitic volcanism.An open marine detrital association of Oligocene to Recent age occurs throughout the Solomons. This comprises two facies. Facies B1 is variably calcareous siltstone, of hemipelagic origin; and Facies B2 consists of volcanogenic clastic deposits, laid down from submarine mass flows.A third association, of shallow marine carbonates, ranges in age from Late Oligocene to Recent. Facies C1 is biohermal limestone, and Facies C2 is biostromal calcarenite.The fourth association comprises areally restricted Pliocene to Recent paralic detrital deposits. Facies D1 includes nearshore clastic sediments, and Facies D2 comprises alluvial sands and gravels.Pre-Oligocene pelagic sediments were deposited contemporaneously with, and subsequent to, the extrusion of oceanic tholeiite. Island arc volcanism commenced along the length of the Solomons during the Oligocene, and greatly influenced sedimentation. Thick volcaniclastic sequences were deposited from submarine mass flows, and shallow marine carbonates accumulated locally. Fine grained graded tuffaceous beds within the marine pelagic association are interpreted as products of this volcanism, suggesting that the Santa Isabel-Malaita-Ulawa area, where these beds are prevalent, was relatively close to the main Solomons chain at this time. A subduction zone may have dipped towards the northeast beneath this volcanic chain. Pliocene to Pleistocene calcalkaline volcanism and tectonism resulted in the emergence of all large islands and led to deposition of clastic and carbonate facies in paralic, shallow and deep marine environments.  相似文献   

9.
Late Pleistocene morainic sequences around Dundalk Bay, eastern Ireland, were deposited in a variety of shallow, glaciomarine environments at the margins of a grounded ice lobe. The deposits are essentially ice-proximal delta-fan and -apron sequences and are divided into two lithofacies associations. Lithofacies association 1 occurs as a series of morainal banks formed at the southern margin of the ice lobe in a body of water open to influences from the Irish Sea. The morainal banks consist mainly of diamictic muds deposited from turbid plumes and by ice-rafting with minor occurrences of turbidites, cross-bedded gravels (subaqueous outwash) and massive boulder gravels (high-density debris flows). Lithofacies association 2 was deposited in a narrow arm of the sea at the north-eastern margin of the ice lobe. The deposits consist mainly of a series of coalescing, ice-proximal Gilbert-type fan deltas which are interbedded distally with tabular and lens-shaped subaqueous deposits. The latter are mainly ice-rafted diamictons, debris-flow deposits and subaqueous sands and gravels. Both lithofacies associations are draped by diamictons formed by a combination of rain-out, debris flow and traction-current activity. At a few localities the upper parts of the sequence have been sheared by minor oscillations of the ice sheet margin. These sequences form part of an extensive belt of glaciomarine deposits which border the drumlin swarms of east-central Ireland. Lithostratigraphic variability is partially related to the arrival of large volumes of debris at the ice lobe margin when the main lowland ice sheet surged during drumlin formation. Complex depositional continua of this type lack any major erosional breaks and should not be used either as climatic proxies or for stratigraphic correlations.  相似文献   

10.
The 3000 Ma Mozaan Group comprises three interacting sedimentary environments: (1) braided alluvial plain, (2) offshore shelf, and (3) tidalites. The predominance of planar cross-bedded sandstones in the fluvial sequence indicates that sedimentation was dominated by southerly accreting transverse bars in a distal braided river system. However, the development of lenticular conglomerates suggests the occasional formation of longitudinal gravel bars, probably during periods of high discharge. Argillaceous sediments, some of which are ferrugineous represent an interplay between clastic sedimentation and chemical precipitation on a prograding shelf. The abnormal thickness of these shelf deposits is attributed to facies stacking. The absence of barrier beach deposits suggests that the marginal environment was controlled by macrotidal conditions. Two varieties of tidal sequences are recognized. The first, which forms the classic upward-fining succession, contains ubiquitous ebb-dominated paleocurrents and is interpreted as having been influenced by tidal asymmetry. The other, which lacks the mixed flat unit, was apparently generated by tidal currents flowing parallel to the coastline. The nature of the Mozaan sediments suggests at least incipient cratonization in eastern South Africa 3000 Ma ago.  相似文献   

11.
Sediments exposed at low tide on the transgressive, hypertidal (>6 m tidal range) Waterside Beach, New Brunswick, Canada permit the scrutiny of sedimentary structures and textures that develop at water depths equivalent to the upper and lower shoreface. Waterside Beach sediments are grouped into eleven sedimentologically distinct deposits that represent three depositional environments: (1) sandy foreshore and shoreface; (2) tidal‐creek braid‐plain and delta; and, (3) wave‐formed gravel and sand bars, and associated deposits. The sandy foreshore and shoreface depositional environment encompasses the backshore; moderately dipping beachface; and a shallowly seaward‐dipping terrace of sandy middle and lower intertidal, and muddy sub‐tidal sediments. Intertidal sediments reworked and deposited by tidal creeks comprise the tidal‐creek braid plain and delta. Wave‐formed sand and gravel bars and associated deposits include: sediment sourced from low‐amplitude, unstable sand bars; gravel deposited from large (up to 5·5 m high, 800 m long), landward‐migrating gravel bars; and zones of mud deposition developed on the landward side of the gravel bars. The relationship between the gravel bars and mud deposits, and between mud‐laden sea water and beach gravels provides mechanisms for the deposition of mud beds, and muddy clast‐ and matrix‐supported conglomerates in ancient conglomeratic successions. Idealized sections are presented as analogues for ancient conglomerates deposited in transgressive systems. Where tidal creeks do not influence sedimentation on the beach, the preserved sequence consists of a gravel lag overlain by increasingly finer‐grained shoreface sediments. Conversely, where tidal creeks debouch onto the beach, erosion of the underlying salt marsh results in deposition of a thicker, more complex beach succession. The thickness of this package is controlled by tidal range, sedimentation rate, and rate of transgression. The tidal‐creek influenced succession comprises repeated sequences of: a thin mud bed overlain by muddy conglomerate, sandy conglomerate, a coarse lag, and capped by trough cross‐bedded sand and gravel.  相似文献   

12.
为了查明洞庭盆地西缘早更新世砾石层沉积特征及沉积环境,在1:5万地质调查基础上,对常德南斗姆湖地区几处第四系砾石层剖面进行了较系统的测量与统计。结果表明: 砾石成分主要来源于寒武纪或前寒武纪地层。砾石分选系数Sa 为1.16~1.64,部分测点Sa>1.40,反映砾石形成时水动力很强,部分砾石层为快速堆积。砾石扁度F为2.06~2.32,大于2.0,砾石以扁平状为主。砾石普遍弱—中等风化,部分砾石强风化,反映砾石在沉积搬运过程中存在风化暴露。砾向分析显示古水流主要来源于SWW—NW向,表明砾石层形成时期古地貌与现有地貌有较大差异。剖面对比得出,区内砾石层是在冲洪积扇基础上发育的以辫状河相为主的沉积体。对研究区砾石层沉积相及古地貌的新认识,为区内金刚石原生矿床的找矿工作提供支撑。  相似文献   

13.
ABSTRACT The Wagwater Trough is a fault-bounded basin which cuts across east-central Jamaica. The basin formed during the late Palaeocene or early Eocene and the earliest sediments deposited in the trough were the Wagwater and Richmond formations of the Wagwater Group. These formations are composed of up to 7000 m of conglomerates, sandstones, and shales. Six facies have been recognized in the Wagwater Group: Facies I-unfossiliferous massive conglomerates; Facies II—channelized, non-marine conglomerates, sandstones, and shales; Facies III-interbedded, fossiliferous conglomerates and sandstones; Facies IV—fossiliferous muddy conglomerates; Facies V—channelized, marine conglomerates, sandstones, and shales; and Facies VI—thin-bedded sheet sandstones and shales. The Wagwater and Richmond formations are interpreted as fan delta-submarine fan deposits. Facies associations suggest that humid-region fan deltas prograded into the basin from the adjacent highlands and discharged very coarse sediments on to a steep submarine slope. At the coast waves reworked the braided-fluvial deposits of the subaerial fan delta into coarse sand and gravel beaches. Sediments deposited on the delta-front slope were frequently remobilized and moved downslope as slumps, debris flows, and turbidity currents. At the slope-basin break submarine fans were deposited. The submarine fans are characterized by coarse inner and mid-fan deposits which grade laterally into thin bedded turbidites of the outer fan and basin floor.  相似文献   

14.
The 600 m thick prograding sedimentary succession of Wagad ranging in age from Callovian to Early Kimmeridgian has been divided into three formations namely, Washtawa, Kanthkot and Gamdau. Present study is confined to younger part of the Washtawa Formation and early part of the Kanthkot Formation exposed around Kanthkot, Washtawa, Chitrod and Rapar. The depositional architecture and sedimentation processes of these deposits have been studied applying sequence stratigraphic context. Facies studies have led to identification of five upward stacking facies associations (A, B, C, D, and E) which reflect that deposition was controlled by one single transgressive — regressive cycle. The transgressive deposit is characterized by fining and thinning upward succession of facies consisting of two facies associations: (1) Association A: medium — to coarse-grained calcareous sandstone — mudrocks alternations (2) Association B: fine-grained calcareous sandstone — mudrocks alternations. The top of this association marks maximum flooding surface as identified by bioturbational fabrics and abundance of deep marine fauna (ammonites). Association A is interpreted as high energy transgressive deposit deposited during relative sea level rise. Whereas, facies association B indicates its deposition in low energy marine environment deposited during stand-still period with low supply of sediments. Regressive sedimentary package has been divided into three facies associations consisting of: (1) Association C: gypsiferous mudstone-siltstone/fine sandstone (2) Association D: laminated, medium-grained sandstone — siltstone (3) Association E: well laminated (coarse and fine mode) sandstone interbedded with coarse grained sandstone with trough cross stratification. Regressive succession of facies association C, D and E is interpreted as wave dominated shoreface, foreshore to backshore and dune environment respectively. Sequence stratigraphic concepts have been applied to subdivide these deposits into two genetic sequences: (i) the lower carbonate dominated (25 m) transgressive deposits (TST) include facies association A and B and the upper thick (75m) regressive deposits (HST) include facies association C, D and E. The two sequences are separated by maximum flooding surface (MFS) identified by sudden shift in facies association from B to C. The transgressive facies association A and B represent the sediments deposited during the syn-rift climax followed by regressive sediments comprising association C, D and E deposited during late syn-rift stage.  相似文献   

15.
Whittecar, G.R. & Mickelson, D. M. 1977 06 01: Sequence of till deposition and erosion in drumlins.
Extensive sand and gravel workings have exposed structural and compositional features of 17 gravel-cored drumlins of late Wisconsin age in eastern Wisconsin. The drumlins are blanketed by 3 m of sandy basal till which truncates lower tills of earlier advanccs, outwash gravels, and an overlying till which is conformable to the gravel bedding and indistinguishable in composition from the surface till. Sands and gravels in the interior of some drumlins are deformed into large overturned folds, and into elastic dikes of fine sand and silt which penetrate to the top of the drumlin and warp overlying gravels. Both the folds and horizontal bedding are truncated by either the drumlin edge or the till blanket.
We interpret the conformable, truncated, and in some cases folded, till as a basal till deposited during glacial advance. The capping, truncating till is viewed as a basal till left by retreating ice.
The following sequence of events is suggested: (1) advance of ice over outwash, and deposition of till in a zone mar the margin; (2) thickening of the ice and erosion of the drumlin shapes; (3) local folding of the gravels and continued erosion; (4) retreat of ice and deposition of basal till under thin ice; (5) deposition of localized ablation till and stratified deposits.  相似文献   

16.
The 2 to 5 km thick, sandstone-dominated (>90%) Jura Quartzite is an extreme example of a mature Neoproterozoic sandstone, previously interpreted as a tide-influenced shelf deposit and herein re-interpreted within a fluvio-tidal deltaic depositional model. Three issues are addressed: (i) evidence for the re-interpretation from tidal shelf to tidal delta; (ii) reasons for vertical facies uniformity; and (iii) sand supply mechanisms to form thick tidal-shelf sandstones. The predominant facies (compound cross-bedded, coarse-grained sandstones) represents the lower parts of metres to tens of metres high, transverse fluvio-tidal bedforms with superimposed smaller bedforms. Ubiquitous erosional surfaces, some with granule–pebble lags, record erosion of the upper parts of those bedforms. There was selective preservation of the higher energy, topographically-lower, parts of channel-bar systems. Strongly asymmetrical, bimodal, palaeocurrents are interpreted as due to associated selective preservation of fluvially-enhanced ebb tidal currents. Finer-grained facies are scarce, due largely to suspended sediment bypass. They record deposition in lower-energy environments, including channel mouth bars, between and down depositional-dip of higher energy fluvio-ebb tidal bars. The lack of wave-formed sedimentary structures and low continuity of mudstone and sandstone interbeds, support deposition in a non-shelf setting. Hence, a sand-rich, fluvial–tidal, current-dominated, largely sub-tidal, delta setting is proposed. This new interpretation avoids the problem of transporting large amounts of coarse sand to a shelf. Facies uniformity and vertical stacking are likely due to sediment oversupply and bypass rather than balanced sediment supply and subsidence rates. However, facies evidence of relative sea level changes is difficult to recognise, which is attributed to: (i) the areally extensive and polygenetic nature of the preserved facies, and (ii) a large stored sediment buffer that dampened response to relative sea-level and/or sediment supply changes. Consideration of preservation bias towards high-energy deposits may be more generally relevant, especially to thick Neoproterozoic and Lower Palaeozoic marine sandstones.  相似文献   

17.
The Ilchulbong tuff cone, Cheju Island, South Korea   总被引：3，自引：0，他引：3  
The Ilchulbong mount of Cheju Island, South Korea, is an emergent tuff cone of middle Pleistocene age formed by eruption of a vesiculating basaltic magma into shallow seawater. A sedimentological study reveals that the cone sequence can be represented by nine sedimentary facies that are grouped into four facies associations. Facies association I represents steep strata near the crater rim composed mostly of crudely and evenly bedded lapilli tuff and minor inversely graded lapilli tuff. These facies suggest fall-out from tephra finger jets and occasional grain flows, respectively. Facies association II represents flank or base-of-slope deposits composed of lenticular and hummocky beds of massive or backset-stacked deposits intercalated between crudely to thinly stratified lapilli tuffs. They suggest occasional resedimentation of tephra by debris flows and slides during the eruption. Facies association III comprises thin, gently dipping marginal strata, composed of thinly stratified lapilli tuff and tuff. This association results from pyroclastic surges and cosurge falls associated with occasional large-scale jets. Facies association IV comprises a reworked sequence of massive, inversely graded and cross-bedded (gravelly) sandstones. These facies represent post-eruptive reworking of tephra by debris and stream flows. The facies associations suggest that the Ilchulbong tuff cone grew by an alternation of vertical and lateral accumulation. The vertical buildup was accomplished by plastering of wet tephra finger jets. This resulted in oversteepening and periodic failure of the deposits, in which resedimentation contributed to the lateral growth. After the eruption ceased, the cone underwent subaerial erosion and faulting of intracrater deposits. A volcaniclastic apron accumulated with erosion of the original tuff cone; the faulting was caused by subsidence of the subvolcanic basement within the crater.  相似文献   

18.
The approach of dynamic stratigraphy aims to understand genetic processes that form stratigraphic units in a hierarchy of spatial and temporal scales. This approach was used to investigate Quaternary gravel deposits in terms of their sedimentology and in order to characterize the various sedimentary units in terms of their hydrogeological properties. Facies analysis within 62 gravel pits, laboratory permeability measurements of field samples and geophysical surveys (3-D georadar, 2-D seismic reflection) led to the detection and classification of sedimentary heterogeneity according to the following six scales whereby each scale can be translated into defined hydrostratigraphic units. (1) Particles and pores (micro scale) that reflect depositional and diagenetic fluid dynamics as well as source material behaviour (e.g. grain-size, roundness, lithological composition). This was found to be important for the hydrogeochemistry of groundwater in gravel aquifers (e.g. higher sorption capacity of carbon-rich limestone particles for organic pollutants). (2) Strata (meso scale) contain the recognition of sorting, fabric, texture and stratinomic features, which can give an indication of transport and depositional dynamics. Five major lithofacies groups, for example, were distinguished within fluvial gravel-bed deposits. Their variable hydraulic properties led to their subdivision into 12 hydrofacies types. They form the smallest mappable hydrostratigraphic units, which may result in either preferred pathways for fluid flow or flow barriers. (3) Depositional elements (macro scale) enable reconstruction of sedimentary/geomorphic elements and their dynamics within a depositional system (e.g. gravel-bed braided river systems are dominated by gravel sheet, gravel dunes and scour pool depositional elements). Hydrostratigraphically, the architecture of depositional elements influences the hydraulic connectivity and local permeability structure/distribution within an aquifer body. Five types of depositional elements in fluvial gravel-bed deposits were distinguished and their geometries/dimensions quantified. (4) Facies bodies (mega scale) composed of a stack of depositional elements and strata recording distinct environmental systems and their dynamics (e.g. a coarse-grained prograding delta system). Hydrostratigraphically, facies bodies represent major compartments of an aquifer. Six major types of meltwater-controlled facies bodies were identified in the study area. (5) Genetic sequences (mega scale) reflect the shifts of depositional environments caused by allocyclic changes (e.g. glacial advance recorded by a coarsening upward sequence) or autocyclic changes of landscape shaping events. These sequences may form separate hydrostratigraphic units or aquifer storeys. (6) Basin fill (giga scale) comprising the lateral and vertical stacking of facies bodies and genetic sequences controlled by either long-term glacier dynamics or short term flood events. The regional distribution of permeable gravel units and, for example, less permeable diamicts builds the larger scale hydrostratigraphy.  相似文献   

19.
A review of the braided-river depositional environment   总被引：8，自引：0，他引：8  
Andrew D. Miall 《Earth》1977,13(1):1-62
  相似文献   

20.
《Sedimentary Geology》2007,193(1-4):167-192
The coarse-grained, ice-contact, Porta Subaqueous Fan/Delta Complex was deposited in glacial Lake Rinteln at the margin of the Saalian ice sheet that advanced south of the Weser Chains, NW Germany. The ice-proximal depositional system was up to 15 km long and 10 km wide. The present study deals with ice-proximal subaqueous fan deposits, which are interpreted as products of a subcritical plane-wall outflow jet that periodically passed into a supercritical jet with hydraulic jump. The proximal facies assemblage consists of the coarse, clast-supported gravelly deposits of a hyperconcentrated (high-density) effluent and of related cohesionless debris flows attributed to the conduit or immediate proximal jet outflow zone of flow establishment. The intermediate facies assemblage, attributed to the outflow jet proximal zone of flow transition, is dominated by normally graded and cross-stratified gravels with scour structures at their bases; these gravels were deposited by a high-density effluent capable of forming mouthbar-like features. These deposits pass downcurrent into an assemblage of planar parallel-stratified and planar and trough cross-stratified sands and pebbly sands (partially interpreted as antidunes), with abundant scour structures and intercalated layers of fine sand/silt and silty mud, attributed to the jet distal zone of flow transition. The distal facies assemblage consists of trough cross-stratified sands and pebbly sands, and is attributed to the outflow jet proximal zone of established flow. The sedimentary succession as a whole has wedge-shape geometry, with a gentle fan-shaped inclination of the bedding from the southeast to the southwest. Repeated vertical alternations of supercritical and subcritical deposits and muddy interlayers can be attributed to temporary fluctuations in the meltwater outflow, whereas the overall upward fining of the succession indicates a net decline of meltwater discharges.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号