首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The volcanic-hosted graphite deposit at Borrowdale in Cumbria, UK, was formed through precipitation from C-O-H fluids. The δ13C data indicate that carbon was incorporated into the mineralizing fluids by assimilation of carbonaceous metapelites of the Skiddaw Group by andesite magmas of the Borrowdale Volcanic Group. The graphite mineralization occurred as the fluids migrated upwards through normal conjugate fractures forming the main subvertical pipe-like bodies. The mineralizing fluids evolved from CO2-CH4-H2O mixtures (XCO2 = 0.6-0.8) to CH4-H2O mixtures. Coevally with graphite deposition, the andesite and dioritic wall rocks adjacent to the veins were intensely hydrothermally altered to a propylitic assemblage. The initial graphite precipitation was probably triggered by the earliest hydration reactions in the volcanic host rocks. During the main mineralization stage, graphite precipitated along the pipe-like bodies due to CO2 → C + O2. This agrees with the isotopic data which indicate that the first graphite morphologies crystallizing from the fluid (cryptocrystalline aggregates) are isotopically lighter than those crystallizing later (flakes). Late chlorite-graphite veins were formed from CH4-enriched fluids following the reaction CH4 + O2 → C + 2H2O, producing the successive precipitation of isotopically lighter graphite morphologies. Thus, as mineralization proceeded, water-generating reactions were involved in graphite precipitation, further favouring the propylitic alteration. The structural features of the pipe-like mineralized bodies as well as the isotopic homogeneity of graphite suggest that the mineralization occurred in a very short period of time.  相似文献   

2.
黄羊山矿床是最近在新疆发现的一个超大型晶质石墨矿床,预测晶质石墨矿物量至少为72.64 Mt。该矿床赋存于花岗岩内,90%的石墨呈球粒状构造,球粒直径最高达20 cm,世界罕见。通过钻孔岩芯编录、探槽编录、镜下观察和锆石U-Pb定年,研究了该矿床矿化情况、矿物组合和成岩年代,探讨了矿床成因。研究表明,黄羊山石墨矿床成岩于(306±4)Ma,属晚石炭世。石墨球粒和基质的岩性相同,皆为碱长花岗岩,只是石墨球粒内较为富集黑云母、角闪石和单斜辉石。与石墨伴生的金属矿物主要为磁黄铁矿、黄铜矿、钛铁矿和赤铁矿。由于石墨的强还原性,这些金属矿物多分布于石墨球粒内,形成典型的环带结构。石墨矿化可分为岩浆热液期和热液叠加期2期,前者是主成矿期,形成球粒状和浸染状构造石墨,后者形成脉状构造石墨。石墨晶体呈片状和胶状结构,片状石墨横截面呈针状,定向性明显。石墨矿石的全岩碳同位素呈负低值,表明构成石墨的碳来自地层有机物。岩浆在上侵过程中同化混染了地层有机物,在岩浆演化晚期熔体相与流体相分离时,碳质溶入流体相中,当温度和压力降低时石墨从岩浆热液中沉淀成矿。中粒钠铁闪石花岗岩、细粒黑云母花岗岩和中粒黑云母花岗岩中皆含石墨球粒,黄羊山岩体仍具有巨大找矿潜力。  相似文献   

3.
The Callie deposit is the largest (6.0 Moz Au) of several gold deposits in the Dead Bullock Soak goldfield of the Northern Territory’s Tanami Region, 550 km northwest of Alice Springs. The Callie ore lies within corridors, up to 180 m wide, of sheeted en echelon quartz veins where they intersect the 500-m-wide hinge of an ESE-plunging F1 anticlinorium. The host rocks are the Blake beds, of the Paleoproterozoic Dead Bullock Formation, which consist of a > 350-m-thick sequence of lower greenschist facies graphitic turbidites and mudstones overlying in excess of 100 m of thickly bedded siltstones and fine sandstones. The rocks are Fe-rich and dominated by assemblages of chlorite and biotite, both of which are of hydrothermal and metamorphic origin. A fundamental characteristic of the hydrothermal alteration is the removal of graphite, a process which is associated with bleaching and the development of bedding-parallel bands of coarse biotite augen. Gold is found only in quartz veins and only where they cut decarbonized chloritic rock with abundant biotite augen and no sulfide minerals. Auriferous quartz veins differ from barren quartz veins by the presence of ilmenite, apatite, xenotime, and gold and the absence of sulfide minerals. The assemblage of gold–ilmenite–apatite–xenotime indicates a linked genesis and mobility of Ti, P, and Y in the mineralizing fluids. Geochemical analysis of samples throughout the deposit shows that gold only occurs in sedimentary rocks with high FeO/(FeO+Fe2O3) and low C/(C+CO2) ratios (> 0.8 and < 0.2, respectively). This association can be explained by reactions that convert C from reduced graphitic host rocks into CO2 and reduce ferric iron in the host rocks to ferrous iron in biotite and chlorite. These reactions would increase the CO2 content of the fluid, facilitating the transport of Ti, P, and Y from the host rocks into the veins. Both CO2 and CH4 produced by reaction of H2O with graphite, effervesced under the lower confining pressures in the veins. This would have partitioned H2S into the vapor phase, destabilizing Au–bisulfide complexes; the loss of CO2 and H2S from the aqueous phase caused precipitation of gold, ilmenite, apatite, and xenotime. It is proposed that this process was the main control on gold precipitation. Oxidization of iron in the very reduced wall rocks, resulting in reduction of the fluid, provided a second mechanism of gold precipitation in previously decarbonized rocks, contributing to the high grades in some samples. Although sulfide minerals, especially arsenopyrite, did form during the hydrothermal event, host rock sulfidation reactions did not play a role in gold precipitation because gold is absent near rocks or veins containing sulfide minerals. Sulfide minerals likely formed by different mechanisms from those associated with gold deposition. Both the fold architecture and subsequent spatially coincident sinistral semibrittle shearing ensured that the ore fluids were strongly focused into the hinges of the anticlines. Within the anticlines, a reactive cap of fine-grained, graphitic, reduced Fe-rich turbidites above more permeable siltstones and fine sandstones impeded fluid flow ensuring efficient removal of graphite, and the associated effervescence of CO2 from the fluid caused the precipitation of gold. Exploration for similar deposits should focus on the intersection of east–west shear zones with folds and Fe-rich graphitic host rocks.  相似文献   

4.
The Géant Dormant gold mine is a sulfide-rich quartz vein gold deposit hosted by a volcano-sedimentary sequence and an associated felsic endogenous dome and dikes. The auriferous quartz-sulfide veins were preceded by two synvolcanic gold-bearing mineralizing events: early sulfidic seafloor-related and later disseminated pyrite in the felsic dome. This deposit differs from classical Archean auriferous quartz vein deposits by the low carbonate and high sulfide contents of the veins and by their formation prior to ductile penetrative deformation. The δ18O values of quartz associated with seafloor-related auriferous sulfides average 11.9 ± 0.6‰ (n = 3). The seafloor hydrothermal fluids had a δ18O value of 3.2‰ calculated at 250 °C. The oxygen isotope composition of quartz and chlorite from veins average 12.5 ± 0.3‰ (n = 20) and 5.9 ± 1.1‰ (n = 4) respectively. Assuming oxygen isotope equilibrium between quartz and chlorite, the veins formed at a temperature of ∼275 °C, which is consistent with the calculated temperature of 269 ± 10 °C from chlorite chemistry. The gold-bearing fluids had a δ18O value of 4.7‰ calculated at 275 °C. The δ34S values of sulfides from the three gold events range from 0.6 to 2.8‰ (n = 32) and are close to magmatic values. Sulfur isotope geothermometry constrains the sulfide precipitation in the gold-bearing veins at a temperature of ∼350 °C. The similarity of the isotope data, the calculated δ18O of the mineralizing fluids and the likely seawater fluid source suggest that the three mineralizing events are genetically related to a volcanogenic hydrothermal system. The high value of the auriferous fluids (δ18O = 4.7‰) is attributed to a significant magmatic fluid contribution to the evolved seawater-dominated convective hydrothermal system. The two-stage filling of veins at increasing temperature from quartz-chlorite (275 °C) to sulfides (350 °C) may reflect the progressive maturation of volcanogenic hydrothermal systems. These results, together with field and geochemical data, suggest that formation of gold-rich volcanogenic systems require specific conditions that comprise a magmatic fluid contribution and gold from arc-related felsic rocks, coeval with the mineralizing events. This study shows that some auriferous quartz-vein orebodies in Archean terranes are formed in volcanogenic rather than mesothermal systems. Received: 12 December 1998 / Accepted: 5 July 1999  相似文献   

5.
This paper describes unusual graphite–sulfide deposits in ultramafic rocks from the Serranía de Ronda (Spain) and Beni Bousera (Morocco). These deposits occur as veins, stockworks and irregular masses, ranging in size from some centimeters to a few meters in thickness. The primary mineral assemblage mainly consists of Fe–Ni–Cu sulfides (pyrrhotite, pentlandite, chalcopyrite and cubanite), graphite and chromite. Weathering occurs in some sulfide-poor deposits that consist of graphite (up to 90%), chromite and goethite. Texturally, graphite may occur as flakes or clusters of flakes and as rounded, nodule-like aggregates. Graphite is highly crystalline and shows light carbon isotopic signatures (δ13C≈− 15‰ to − 21‰). Occasionally, some nodule-like graphite aggregates display large isotopic zoning with heavier cubic forms (probably graphite pseudomorphs after diamond with δ13C up to − 3.3‰) coated by progressively lighter flakes outwards (δ13C up to − 15.2‰).Asthenospheric-derived melts originated the partial melting (and melt–rock reactions) of peridotites and pyroxenites generating residual melts from which the graphite–sulfide deposits were formed. These residual melts concentrated volatile components (mainly CO2 and H2O), as well as S, As, and chalcophile elements. Carbon was incorporated into the melts from the melt–rock reactions of graphite-bearing (formerly diamonds) garnet pyroxenites with infiltrated asthenospheric melts. Graphite-rich garnet pyroxenites formed through the UHP transformation of subducted kerogen-rich crustal material into the mantle. Thus, graphite in most of the studied occurrences has light (biogenic) carbon signatures. Locally, reaction of the light carbon in the melts with relicts of 13C-enriched graphitized diamonds (probably generated from hydrothermal calcite veins in the subducting oceanic crust) reacted with the partial melts to form isotopically zoned nodule-like graphite aggregates.  相似文献   

6.
Mineral equilibria modeling involving solid solution calculations has been combined with mineral assemblage information from the alteration zones associated with gold mineralization to determine the T and X CO2 conditions for the formation of the Magdala gold deposit at Stawell, Victoria, Australia. Economic gold mineralization is primarily hosted within the stilpnomelane alteration zone of the Stawell Facies that is adjacent to the Magdala Basalt. Evolution of the Magdala gold deposit involved at least three fluid infiltration events: (1) a CO2-bearing fluid during the D2 deformation event produced carbonate spots throughout the chlorite zone; (2) a CO2–S–K-bearing fluid, accompanied the D3–4ab deformation and produced a muscovite zone and siderite rims on ankerite; and (3) a CO2–K–S–Au-bearing fluid during the D4c deformation event produced the stilpnomelane zone of the Stawell Facies, the proximal and distal alteration zones within the Magdala Basalt, and the main economic gold mineralization. Mineral equilibria modeling constrains the temperature of formation of the Magdala deposit to T = 345–390°C at 3kbar, substantially lower than indicated by other previous classical thermobarometry methods. Furthermore, this method has allowed the characterization of the mineralizing fluid and constrained its composition to X CO2 < 0.08 at 3kbar. The timing and composition of the mineralizing fluids are similar to that of metamorphic fluid generated from devolatilization of a greenstone pile with peak of metamorphism occurring earlier and at deeper levels in the crust.  相似文献   

7.
The Polaris deposit is one of the largest Mississippi Valley-type deposits in the world, with 22 million tonnes of ore at 14% Zn and 4% Pb contained in a single, compact orebody surrounded by dolomitized host rocks. Using detailed sampling of carbonates in the orebody and the dolostone halo, this paper aims to characterize the temporal and spatial evolution of the mineralizing system, and to understand the mechanisms that controlled the accumulation of this large, compact Zn–Pb deposit. Five types of dolomite have been distinguished, including three replacement (RD) and two pore-filling dolomites (PD). The paragenetic order is RD1, RD2, RD3, PD1, and PD2. Pore-filling calcite (PC) postdates all other minerals. In most cases, sulfides and dolomite did not co-precipitate, but sphalerite and galena largely overlap with RD3 and PD1. Various dolomites are dissolved or replaced by sulfide-precipitating fluids; sulfides in turn can be overgrown by dolomites. Colloform texture in sphalerite is widespread. Fluid inclusions were studied in RD3, PD1, PD2, sphalerite, and PC. The overall ranges of homogenization temperatures (T h) and last ice-melting temperatures (T m-ice) for fluid inclusions in dolomites and sphalerite are from 67 to 141 °C and from −46.7 to −27.0 °C, respectively, consistent with warm basinal brines with high salinities and Ca/Na ratios. Gas chromatographic analysis of these fluid inclusions indicates low concentrations of hydrocarbons (<0.06 mol%). C, O, and Sr isotopes were analyzed for all dolomites and PC, as well as for the fine-grained host limestone and early diagenetic calcite (SC–RC). The isotopic values of RD2, RD3, PD1, and PD2 cluster tightly and form largely overlapping domains. With respect to the host limestone, they are depleted in 18O, similar in δ13C, and slightly enriched in 87Sr. There are no regular spatial variations for fluid inclusion and isotope data, indicating an overall geochemical homogeneity in the hydrothermal system. However, certain samples close to the fracture zones in the orebody with slightly elevated T h and 87Sr/86Sr values and depleted δ18O values suggest that the fracture zone was the conduit for the hot brines. Based on the geological and geochemical characteristics of the deposit, we propose that sulfide precipitation at Polaris was caused by mixing of a reduced, metal-rich, sulfur-poor fluid with a reduced, metal-poor, sulfur-rich fluid at the site of mineralization. The metal-carrying fluid ascended along fractures from below the deposit and was hotter than the host rocks, whereas the reduced sulfur-carrying fluid was delivered to the site of mineralization laterally and was in thermal equilibrium with the host rocks. This model can readily explain the dissolution of dolomite during sulfide precipitation and the abundance of colloform sphalerite, as well as the low concentrations of hydrocarbons in fluid inclusions. Accepted: 20 December 1999  相似文献   

8.
张家口地区主要金矿床金的矿化富集机制研究   总被引：3，自引：0，他引：3  
张家口地区主要金矿床金的矿化富集机制研究莫测辉，王秀璋，程景平，梁华英（中国科学院广州地球化学研究所，广州５１０６４０）关键词金矿床，矿化作用，富集机制，张家口地区冀西北张家口金矿化集中区金矿床按赋矿岩石类型可分为变质岩（混合岩）型和碱性岩型金矿，分...  相似文献   

9.
In this paper, we present new isotopic (H, O) data of fluids in tourmalines from the large Sn deposit at Solnechnoye (Far East Russia). These data indicate that the deposit formed by fluid‐rock interactions in a hydrothermal system where the mineralizing fluid was mainly magmatic and to a lesser extent meteoric. This is in agreement with a magmatic fluid model. Our interpretation of the new isotopic data is consistent with earlier findings of the studies on fluid‐rock interactions that magmatic fluids form larger Sn deposits than exogenic fluids. We propose that isotopic (H, O) data of fluids in tourmaline, rather than those in quartz, muscovite, or chlorite, support robust interpretation on the nature of mineralizing fluids associated with Sn deposits.  相似文献   

10.
The Camagüey district, Cuba, is known for its epithermal precious metal deposits in a Cretaceous volcanic arc setting. Recently, the La Unión prospect was discovered in the southern part of the district, containing gold and minor copper mineralization interpreted as porphyry type. Mineralization is hosted in a 73.0 ± 1.5 Ma calc–alkaline I-type oxidized porphyry quartz diorite intrusive within volcanic and volcaniclastic rocks of the early Cretaceous Guáimaro Formation. The porphyry is affected by propylitic alteration and crosscut by a network of quartz and carbonate veinlets and veins. Chlorite, epidote, sericite, quartz, and pyrite are the main minerals in the early veins which are cut by late carbonate and zeolite veins. Late barite pseudomorphously replaces pyrite. Gold is associated with pyrite as disseminations in the altered quartz diorite and in the veins, occurring as inclusions or filling fractures in pyrite with 4 g/t Au in bulk samples, and up to 900 ppm Au in in pyrite. Fluid inclusion and oxygen isotope data are consistent with a H2O–NaCl–(KCl) mineralizing fluid, derived from the quartz diorite magma, and trapped at least at 425°C and 1.2 kbar. This primary fluid unmixed into two fluid phases, a hypersaline aqueous fluid and a low-salinity vapor-rich fluid. Boiling during cooling may have played an important role in metal precipitation. Pyrite δ34S values for the La Unión prospect range between 0.71‰ and 1.31‰, consistent with a homogeneous magmatic sulfur source. The fluids in equilibrium with the mineralized rocks have estimated δ18O values from 8‰ to 11.8‰, calculated for a temperature range of 480–505°C. The tectonic environment of the La Unión prospect, its high gold and low copper contents, the physical–chemical characteristics of the mineralizing fluids and the isotopic signature of the alteration minerals and fluids indicate that the La Unión gold mineralization is similar to the porphyry gold type, even though the ore-related epidote–chlorite alteration can be classified as propylitic and not the classic potassic and/or phyllic alteration. The low copper contents in the prospect could be due to a mineralizing fluid previously saturated in copper, which is indicated by trapped chalcopyrite crystals in high-temperature fluid inclusions. The low-temperature paragenesis, represented by carbonate, zeolite and barite, indicates epithermal overprint. The study shows the potential for other gold porphyry-type deposits in the Cretaceous volcanoplutonic arc of Cuba.  相似文献   

11.
The Alvo 118 iron oxide–copper–gold (IOCG) deposit (170 Mt at 1.0 wt.% Cu, 0.3 g/t Au) lies in the southern sector of the Itacaúnas Shear Belt, Carajás Mineral Province, along a WNW–ESE-striking, 60-km-long shear zone, close to the contact of the ~2.76-Ga metavolcano-sedimentary Itacaiúnas Supergroup and the basement (~3.0 Ga Xingu Complex). The Alvo 118 deposit is hosted by mafic and felsic metavolcanic rocks and crosscutting granitoid and gabbro intrusions that have been subjected to the following hydrothermal alteration sequence towards the ore zones: (1) poorly developed sodic alteration (albite and scapolite); (2) potassic alteration (biotite or K-feldspar) accompanied by magnetite formation and silicification; (3) widespread, pervasive chlorite alteration spatially associated with quartz–carbonate–sulphide infill ore breccia and vein stockworks; and (4) local post-ore quartz–sericite alteration. The ore assemblage is dominated by chalcopyrite (~60%), bornite (~10%), hematite (~20%), magnetite (10%) and subordinate chalcocite, native gold, Au–Ag tellurides, galena, cassiterite, F-rich apatite, xenotime, monazite, britholite-(Y) and a gadolinite-group mineral. Fluid inclusion studies in quartz point to a fluid regime composed of two distinct fluid types that may have probably coexisted within the timeframe of the Cu–Au mineralizing episode: a hot (>200°C) saline (32.8‰ to 40.6 wt.% NaCl eq.) solution, represented by salt-bearing aqueous inclusions, and a lower temperature (<200°C), low to intermediate salinity (<15 wt.% NaCl eq.) aqueous fluid defined by two-phase (LH2O + VH2O) fluid inclusions. This trend is very similar to those defined for other IOCG systems of the Carajás Mineral Province. δ 18OH2O values in equilibrium with calcite (−1.0‰ to 7.5‰ at 277°C to 344°C) overlap the lower range for primary magmatic waters, but the more 18O-depleted values also point to the involvement of externally derived fluids, possibly of meteoric origin. Furthermore, sulphide δ 34S values (5.1‰ to 6.3‰), together with available boron isotope and Cl/Br–Na/Cl data provide evidence for a significant component of residual evaporative fluids (e.g., bittern fluids generated by seawater evaporation) in this scenario that, together with magma-derived brines, would be the main sources of the highly saline fluids involved in the formation Alvo 118 IOCG deposit. The restricted high temperature sodic alteration, the pervasive overprinting of the potassic alteration minerals by chlorite proximal to the ore zones, ore breccias with open-space filling textures in brittle structures, microthermometric and stable isotope data indicate, collectively, that the Alvo 118 IOCG system developed at structurally high levels and may be considered the shallower representative of the IOCG systems of the CMP.  相似文献   

12.
The Ferguson Lake Ni–Cu–Co–platinum-group element (PGE) deposit in Nunavut, Canada, occurs near the structural hanging wall of a metamorphosed gabbroic sill that is concordant with the enclosing country rock gneisses and amphibolites. Massive to semi-massive sulfide occurs toward the structural hanging wall of the metagabbro, and a low-sulfide, high-PGE style of mineralization (sulfide veins and disseminations) locally occurs ~30–50 m below the main massive sulfide. Water–rock interaction in the Ferguson Lake Ni–Cu–Co–PGE deposit is manifested mostly as widespread, post-metamorphic, epidote–chlorite–calcite veins, and replacement assemblages that contain variable amounts of sulfides and platinum-group minerals (PGM). PGM occur as inclusions in magmatic pyrrhotite and chalcopyrite in both the massive sulfide and high-PGE zones, at the contact between sulfides and hornblende or magnetite inclusions in the massive sulfide, in undeformed sulfide veins and adjacent chlorite and/or epidote halos, in hornblende adjacent to hydrothermal veins, and in plagioclase–chlorite aggregates replacing garnet cemented by sulfide. The PGM are mostly represented by the kotulskite (PdTe)–sobolevskite (PdBi) solid solution but also include michenerite (PdBiTe), froodite (PdBi2), merenskyite (PdTe2), mertieite II (Pd8[Sb,As]3), and sperrylite (PtAs2) and occur in variety of textural settings. Those that occur in massive and interstitial sulfides, interpreted to be of magmatic origin and formed through exsolution from base metal sulfides at temperatures <600°C, are dominantly Bi rich (i.e., Te-bearing sobolevskite), whereas those that occur in late-stage hydrothermal sulfide/silicate veins and their epidote–chlorite alteration halos tend to be more Te rich (i.e., Bi-bearing kotulskite). The chemistry and textural setting of the various PGM supports a genetic model that links the magmatic and hydrothermal end-members of the sulfide–PGM mineralization. The association of PGM with magmatic sulfides in the massive sulfide and high-PGE zones has been interpreted to indicate that PGE mineralization was initially formed through exsolution from base metal sulfides which formed by magmatic sulfide liquid segregation and crystallization. However, the occurrence of PGM in undeformed sulfide-bearing veins and in their chlorite–epidote halos and differences in PGM chemistry indicate that hydrothermal fluids were responsible for post-metamorphic redistribution and dispersion of PGE.  相似文献   

13.
The La Guitarra deposit (Temascaltepec district, South-Central Mexico), belongs to the low/intermediate sulfidation epithermal type, has a polymetallic character although it is currently being mined for Ag and Au. The mineralization shows a polyphasic character and formed through several stages and sub-stages (named I, IIA, IIB, IIC, IID, and III). The previous structural, mineralogical, fluid inclusion and stable isotope studies were used to constrain the selection of samples for volatile and helium isotope analyses portrayed in this study. The N2/Ar overall range obtained from analytical runs on fluid inclusion volatiles, by means of Quadrupole Mass Spectrometry (QMS), is 0 to 2526, and it ranges 0 to 2526 for stage I, 0 to 1264 for stage IIA, 0 to 1369 for stage IIB, 11 to 2401 for stage IIC, 19 to 324 for stage IID, and 0 to 2526 for stage III. These values, combined with the CO2/CH4 ratios, and N2-He-Ar and N2-CH4-Ar relationships, suggest the occurrence of fluids from magmatic, crustal, and shallow meteoric sources in the forming epithermal vein deposit. The helium isotope analyses, obtained by means of Noble Gas Mass Spectrometry, display R/Ra average values between 0.5 and 2, pointing to the occurrence of mantle-derived helium that was relatively diluted or “contaminated” by crustal helium. These volatile analyses, when correlated with the stable isotope data from previous works and He isotope data, show the same distribution of data concerning sources for mineralizing fluids, especially those corresponding to magmatic and crustal sources. Thus, the overall geochemical data from mineralizing fluids are revealed as intrinsically consistent when compared to each other.The three main sources for mineralizing fluids (magmatic, and both deep and shallow meteoric fluids) are accountable at any scale, from stages of mineralization down to specific mineral associations. The volatile and helium isotope data obtained in this paper suggest that the precious metal-bearing mineral associations formed after hydrothermal pulses of predominantly oxidized magmatic fluids, and thus it is likely that precious metals were carried by fluids with such origin. Minerals from base-metal sulfide associations record both crustal and magmatic sources for mineralizing fluids, thus suggesting that base metals could be derived from deep leaching of crustal rocks. At the La Guitarra epithermal deposit there is no evidence for an evolution of mineralizing fluids towards any dominant source. Rather than that, volatile analyses in fluid inclusions suggest that this deposit formed as a pulsing hydrothermal system where each pulse or set of pulses accounts for different compositions of mineralizing fluids.The positive correlation between the relative content of magmatic fluids (high N2/Ar ratios) and H2S suggests that the necessary sulfur to carry mostly gold as bisulfide complexes came essentially from magmatic sources. Chlorine necessary to carry silver and base metals was found to be abundant in inclusion fluids and although there is no evidence about its source, it is plausible that it may come from magmatic sources as well.  相似文献   

14.
Summary The El Dorado Au-Cu deposit is located in an extensive intra-caldera zone of hydrothermal alteration affecting Upper Cretaceous andesites of the Los Elquinos Formation at La Serena (≈ 29°47′S Lat., 70°43′W Long., Chile). Quartz-sulfide veins of economic potential are hosted by N25W and N20E fault structures associated with quartz-illite alteration (+supergene kaolinite). The main ore minerals in the deposit are pyrite, chalcopyrite ± fahlore (As/(As + Sb): 0.06−0.98), with electrum, sphalerite, galena, bournonite-seligmanite (As/(As + Sb): 0.21−0.31), marcasite, pyrrhotite being accessory phases. Electrum, with an Ag content between 32 and 37 at.%, occurs interstitial to pyrite aggregates or along pyrite fractures. Pyrite commonly exhibits chemical zonation with some zones up to 1.96 at.% As. Electron probe microanalyses of pyrite indicate that As-rich zones do not exhibit detectable Au values. Fluid inclusion microthermometry shows homogenization temperatures between 130 and 352 °C and salinities between 1.6 and 6.9 wt.% NaCl eq. Isotope data for quartz, ankerite and phyllosilicates and estimated temperatures show that δ18O and δD for the hydrothermal fluids were between 3 and 10‰ and between −95 and −75‰, respectively. These results suggest the mineralizing fluids were a mixture of meteoric and magmatic waters. An epithermal intermediate-sulfidation model is proposed for the formation of the El Dorado deposit. Author’s present address: J. Carrillo-Rosúa, Dpto. de Didáctica de las Ciencias Experimentales, Universidad de Granada, Campus de Cartuja, 18071, Granada, Spain  相似文献   

15.
The Assif El Mal Zn–Pb (Cu–Ag) vein system, located in the northern flank of the High Atlas of Marrakech (Morocco), is hosted in a Cambro-Ordovician volcaniclastic and metasedimentary sequence composed of graywacke, siltstone, pelite, and shale interlayered with minor tuff and mudstone. Intrusion of synorogenic to postorogenic Late Hercynian peraluminous granitoids has contact metamorphosed the host rocks giving rise to a metamorphic assemblage of quartz, plagioclase, biotite, muscovite, chlorite, amphibole, chloritoid, and garnet. The Assif El Mal Zn–Pb (Cu–Ag) mineralization forms subvertical veins with ribbon, fault breccia, cockade, comb, and crack and seal textures. Two-phase liquid–vapor fluid inclusions that were trapped during several stages occur in quartz and sphalerite. Primary inclusion fluids exhibit T h mean values ranging from 104°C to 198°C. Final ice-melting temperatures range from −8.1°C to −12.8°C, corresponding to salinities of ∼15 wt.% NaCl equiv. Halogen data suggest that the salinity of the ore fluids was largely due to evaporation of seawater. Late secondary fluid inclusions have either Ca-rich, saline (26 wt.% NaCl equiv.), or very dilute (3.5 wt.% NaCl equiv.) compositions and homogenization temperatures ranging from 75°C to 150°C. The δ18O and δD fluid values suggest an isotopically heterogeneous fluid source involving mixing between connate seawater and black-shale-derived organic waters. Low δ13CVPDB values ranging from −7.5‰ to −7.7‰ indicate a homogeneous carbon source, possibly organic matter disseminated in black shale hosting the Zn–Pb (Cu–Ag) veins. The calculated δ34SH2S values for reduced sulfur (22.5‰ to 24.3‰) are most likely from reduction of SO4 2− in trapped seawater sulfate or evaporite in the host rocks. Reduction of sulfate probably occurred through thermochemical sulfate reduction in which organic matter was oxidized to produce CO2 which ultimately led to precipitation of saddle dolomite with isotopically light carbon. Lead isotope compositions are consistent with fluid–rock interaction that leached metals from the immediate Cambro-Ordovician volcaniclastic and metasedimentary sequence or from the underlying Paleo-Neoproterozoic crustal basement. Geological constraints suggest that the vein system of Assif El Mal formed during the Jurassic opening of the central Atlantic Ocean.  相似文献   

16.
Carbon-saturated crustal fluids in the C–O–H system comprise H2O, CO2 and CH4 as the most important fluid species. Graphite precipitation from a cooling C–O–H is discussed for two different systems, namely for a fluid–rock system in which no transfer of atomic oxygen and hydrogen between the fluid and the rock is possible (closed fluid system), and for an open fluid system. Thermodynamic model calculations show that the graphite-forming reactions and the graphite precipitation potential are different for these two systems. Furthermore, the calculations demonstrate that for both systems, the following factors play a role in determining the graphite precipitation potential, i.e. (1) the redox state of the fluid, (2) the initial pressure and temperature conditions and (3) whether cooling is combined with decompression. Open and closed fluid system graphite precipitation can be distinguished from each other using fluid inclusion and stable carbon isotope studies. The results of this study provide insight in the formation of hydrothermal graphite deposits.  相似文献   

17.
The Igarapé Bahia gold deposit has developed from weathering of a near-vertical hydrothermal Cu (Au) mineralization zone. The unweathered bedrock composed of chlorite schists is mainly metamorphosed basalts, pyroclastic and clastic sedimentary rocks and iron formation. Contents and Fe/(Fe + Mg) ratios of chlorites increase from distal country rock towards the mineralization zone, which can be attributed to different water/rock ratios and locations in a hydrothermal system. In the hydrothermal system high salinity fluids convected through basin-floor rocks, stripping metals from the recharge zones with precipitation in discharge zones. The chlorite with lower Fe/(Fe + Mg) ratios indicates alteration by relatively unreacted Mg-rich fluids, occurring within recharge zones. By contrast, the chlorite with higher Fe/(Fe + Mg) ratios in the mineralization zone formed from solutions rich in Fe, Mn, Au, Cu, H2S and SiO2 within a discharge zone. The iron formation could also be formed within the discharge zone or on the basin floor from the Fe-rich fluids. The distal country rock with less chlorite content is a hydrothermal product at low water/rock ratios whereas the proximal country rock and the host rock with more chlorite content formed at high water/rock ratio conditions. The Al(IV) contents of chlorites indicate that the formation temperatures of these rocks range from 204 to 266 °C, with temperatures slightly increasing from distal country rock towards the mineralization zone.  相似文献   

18.
Chlorite and berthierine occur through alteration of cordierite within enclaves of metamorphic rocks transformed by the Sierra Albarrana pegmatites. The coexistence of both phyllosilicates allows us to study their stability relationships and to compare their chemical compositions. Samples showing incipient replacement of cordierite by small cryptocrystalline aggregates can be identified by X-ray diffraction (XRD) as berthierine with small quantities of chlorite. Electron Microprobe (EMP) analyses give mixed compositions of berthierine and cordierite. Samples with extensive replacement of cordierite by aggregates show similar characteristics to those with incipient replacement, but some small crystals are present. The last type of sample shows complete replacement of cordierite by crystals showing optical properties of chlorite and EMPA compositions coherent with chlorite or berthierine. Their XRD pattern corresponds to chlorite and their high resolution transmission electron microscopy (HRTEM) images only show perfect sequences of 14 Å lattice fringes. The cryptocrystalline aggregates of the samples with incipient and extensive replacement present coexistent areas of 14 Å and 7 Å lattice fringes that are intergrown at different levels: (1) large areas (> 1 m) of 7 Å layers; (2) packets of 7 Å layers between 14 Å layer areas, with visible 7 Å to 14 Å lateral changes; (3) random mixed-layers 7 Å/14 Å. Chlorite is the final stable product of alteration of cordierite, with berthierine as an intermediate metastable phase. Energy dispersive X-ray spectrometry microanalyses of 14 Å, 7 Å and (14+7) Å areas show lack of systematic differences in chemical compositions between both phyllosilicates which may be considered as true polymorphs.  相似文献   

19.
1IntroductionTheHongshijinggolddepositislocatedinthenorthofLuobupouLakeofRuoqiang ,about 30 0kmsouthwestofHamiCity ,Xinjiang .ItwasdiscoveredbytheSixthGeologicalTeamofXinjiangduringgeo chemicalexploration .TheHongshijinggolddeposit,whichoccursinthegold bearingformationcomposedofMiddleandLateCarboniferousvolcanicandpyroclasticrocks ,isabrittle ductileshearzonetypegolddepositcontrolledbyariftbelt.TheHongshijinggolddepositislocatedinthesouthwestoftheHongshi jing -Maotoushanmineralizationb…  相似文献   

20.
The Luojiahe Cu deposit in the Zhongtiaoshan region is located in the southern margin of the North China Craton. The orebodies are hosted in the mafic volcanic-sedimentary sequences of the metamorphosed (greenschist-facies) Neoarchean Songjiashan Group. The Luojiahe Cu mineralization can be divided into the primary volcanogenic massive sulfide (VMS) mineralization stage (Stage I, banded or stockwork ores) and the subsequent metamorphic remobilization stage (Stage II, coarse-vein ores).Three types of quartz selected for fluid inclusion (FI) studies were collected from the Stage I banded (Q1) and stockwork (Q2) ores and Stage II coarse-vein (Q3) ores. Four types of FIs were identified: (1) liquid-rich FIs (L-type), (2) pure vapor and vapor-rich FIs (V-type), (3) daughter mineral-bearing FIs (S-type), and (4) CH4-H2O FIs (C-type). Systematical microthermometric and H-O isotopic studies show that the Stage I ore-forming fluids consist predominantly of high salinity evolved seawater (125–220 °C; 23.9–27.9 wt.% NaCl equiv.) and some magmatic-hydrothermal fluids (249–339 °C; 34.5–42.2 wt.% NaCl equiv.). The two fluid end-members are represented by the L-type FIs in Q1 and the S- and V-type FIs in Q2. The temperature- and salinity variation trends of the L-type FIs in Q1 indicate a mixing process between the hot evolved seawater and cold seawater at Stage I. Furthermore, the V- and S-type FI coexistence in Q2 and their microthermometric data suggest that fluid unmixing has occurred in original magmatic fluids at Stage I. In contrast, the Stage II ore-forming fluids consist of CH4-rich metamorphic fluids (192–350 °C; 10.6–43.2 wt.% NaCl equiv.). Carbon isotopic analysis of the Stage II calcite (− 4.58 to − 10.83‰) and graphite (− 32.01 to − 39.16‰) in the ore-hosting chlorite schist indicates that the metamorphic ore-forming fluids had exchanged carbon isotope with graphite. The generation of CH4 may have resulted from the interaction between H2O (released by metamorphic devolatilization) and graphite. The continuous consumption of H2O in the hydrothermal fluid system may have increased the fluid salinity and triggered fluid unmixing in the CH4-NaCl-H2O system. In addition, the VMS metallogenic environment is generally favorable for microbial communities. It is considered that the graphite at Luojiahe may have been derived from sedimentary organic matter formed in seafloor hydrothermal vent systems, as also supported by carbon isotopic data.We propose that at Stage I, the main mineralization may have been resulted from 1) fluid mixing of hot evolved seawater and cold seawater in the near-surface environment; and 2) fluid unmixing caused by the percolation of magmatic fluids into syn-volcanic faults, forming the stockwork ores. At Stage II, the interaction between H2O and graphite may have resulted in the reduction of ore-forming fluids and Cu precipitation, and fluid unmixing in the CH4-NaCl-H2O system may have further promoted the Cu mineralization.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号