首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Soils derived from different lithologies and their controls on preferential flow remain underexplored in forested landscapes. In the same lithology, the propensity for preferential flow occurrence at different hillslope positions also remains largely elusive. By utilizing a soil moisture response time method, we compared preferential flow occurrence between a shale site (Shale Hills, silt loam soils) and a sandstone site (Garner Run, sandy loam soils) at four hillslope positions: ridge-top, North- and South-facing mid-slopes and toe slope, for over 2 years. The catchments are neighbouring and covered by temperate forest. For the four hillslope positions, Shale Hills had higher preferential flow frequencies compared to Garner Run. Between these two catchments, the South-facing mid-slope sites showed the highest contrasts in preferential flow frequency (33.5% of events at Shale Hills vs. 8.8% at Garner Run) while the ridge-top sites showed the lowest contrasts (18.7 vs. 13.2%). Additionally, over the unfrozen period, for seven out of eight monitoring sites, drier antecedent conditions tended to be more favourable for preferential flows to occur, with significant (p < .01) relationships at two sites. Except for the South-facing mid-slope sites, both Shale Hills and Garner Run had two preferential flow pathways. The characteristic preferential flow pathways at Shale Hills were the Bw and C horizons, and for Garner Run, preferential flow moved from the E/AE horizon to the Bw horizon. This study shows that shale-derived soils tended to have higher preferential flow occurrence than sandstone soils, but hillslope positions exhibit different levels of contrasts. More effort should be paid to study the impact of lithology on preferential flows in the context of land surface modelling and biogeochemical reactions to improve ecosystem services of headwater catchments.  相似文献   

2.
Preferential flow is known to influence hillslope hydrology in many areas around the world. Most research on preferential flow has been performed in temperate regions. Preferential infiltration has also been found in semi‐arid regions, but its impact on the hydrology of these regions is poorly known. The aim of this study is to describe and quantify the influence of preferential flow on the hillslope hydrology from small scale (infiltration) to large scale (subsurface stormflow) in a semi‐arid Dehesa landscape. Precipitation, soil moisture content, piezometric water level and discharge data were used to analyse the hydrological functioning of a catchment in Spain. Variability of soil moisture content during the transition from dry to wet season (September to November) within horizontal soil layers leads to the conclusion that there is preferential infiltration into the soils. When the rainfall intensity is high, a water level rapidly builds up in the piezometer pipes in the area, sometimes even reaching soil surface. This water level also drops back to bedrock within a few hours (under dry catchment conditions) to days (under wet catchment conditions). As the soil matrix is not necessarily wet while this water layer is built up, it is thought to be a transient water table in large connected pores which drain partly to the matrix, partly fill up bedrock irregularities and partly drain through subsurface flow to the channels. When the soil matrix becomes wetter the loss of water from macropores to the matrix and bedrock decreases and subsurface stormflow increases. It may be concluded that the hillslope hydrological system consists of a fine matrix domain and a macropore domain, which have their own flow characteristics but which also interact, depending on the soil matrix and macropore moisture contents. The macropore flow can result in subsurface flow, ranging from 13% contribution to total discharge for a large event of high intensity rainfall or high discharge to 80% of total discharge for a small event with low intensity rainfall or low discharge. During large events the fraction of subsurface stormflow in the discharge is suppressed by the large amount of surface runoff. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

3.
Examination of spatial variability of streamflow in headwater areas can provide important insight about factors that influence hillslope hydrology. Detailed observations of variations in stream channel input, based on a tracer experiment, indicate that topography alone cannot explain flow variability. However, determination of changes in channel input on a small spatial scale can provide valuable clues to factors, such as structural geology that control subsurface flows.  相似文献   

4.
Preferential flow is of high relevance for runoff generation, transport of chemicals and nutrients, and the transit time distribution of water in the soil or watershed. However, preferential flow effects are generally ignored in lumped hydrological models. And even most physically‐based models ignore macropores and preferential flow features at the soil and hillslope scale. Keith Beven was never satisfied with this situation and he tried again and again to convince the scientific community to focus their research on the complex topic of macropore and preferential flow. Although he recognized how difficult it is to correctly include preferential flow in hydrological models, he made substantial progress defining and describing macropore flow and showing its relevance, developing models to simulate preferential flow, and in particular, the interaction between macropores and the soil matrix. In this short commentary, I reflect on these achievements and outline a vision for research in preferential flow experiments and modeling.  相似文献   

5.
The natural heterogeneity of water and solute movement in hillslope soils makes it difficult to accurately characterize the transport of surface‐applied pollutants without first gathering spatially distributed hydrological data. This study examined the application of time‐domain reflectometry (TDR) to measure solute transport in hillslopes. Three different plot designs were used to examine the transport of a conservative tracer in the first 50 cm of a moderately sloping soil. In the first plot, which was designed to examine spatial variability in vertical transport in a 1·2 m2 plot, a single probe per meter was found to adequately characterize vertical solute travel times. In addition, a dye and excavation study in this plot revealed lateral preferential flow in small macropores and a transport pattern where solute is focused vertically into preferential flow pathways. The bypass flow delivers solute deeper in the soil, where lateral flow occurs. The second plot, designed to capture both vertical and lateral flow, provided additional evidence confirming the flow patterns identified in the excavation of the first plot. The third plot was designed to examine lateral flow and once again preferential flow of the tracer was observed. In one instance rapid solute transport in this plot was estimated to occur in as little as 3% of the available pore space. Finally, it was demonstrated that the soil anisotropy, although partially responsible for lateral subsurface transport, may also homogenize the transport response across the hillslope by decreasing vertical solute spreading. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

6.
Abstract

A physically-based hillslope hydrological model with shallow overland flow and rapid subsurface stormflow components was developed and calibrated using field experiments conducted on a preferential path nested hillslope in northeast India. Virtual experiments were carried out to perform sensitivity analysis of the model using the automated parameter estimation (PEST) algorithm. Different physical parameters of the model were varied to study the resulting effects on overland flow and subsurface stormflow responses from the theoretical hillslopes. It was observed that topographical shapes had significant effects on overland flow hydrographs. The slope profiles, surface storage, relief, rainfall intensity and infiltration rates primarily controlled the overland flow response of the hillslopes. Prompt subsurface stormflow responses were mainly dominated by lateral preferential flow, as soil matrix flow rates were very slow. Rainfall intensity and soil macropore structures were the most influential parameters on subsurface stormflow. The number of connected soil macropores was a more sensitive parameter than the size of macropores. In hillslopes with highly active vertical and lateral preferential pathways, saturation excess overland flow was not evident. However, saturation excess overland flow was generated if the lateral macropores were disconnected. Under such conditions, rainfall intensity, duration and preferential flow rate governed the process of saturation excess overland flow generation from hillslopes.
Editor D. Koutsoyiannis; Associate editor C. Perrin  相似文献   

7.
Hydrological budgets and flow pathways have been quantified for a small upland catchment (1.76 km2) in the northeast of Scotland. Water balance calculations for four subcatchments identified spatial variability within the catchment, with an estimated runoff enhancement of up to 25% for the upper western area, compared with the rest of the catchment. Data from spatial hydrochemical sampling, over a range of flow conditions, were used to identify the principal hillslope runoff mechanisms within the catchment. A hydrochemical mixing analysis revealed that runoff emerging from springs in various locations of the hillslope accounted for a significant proportion of flow in the streams, even during storm events. A hydrological model of the catchment was calibrated using the calculated stream flows for four locations, together with results from the mixing analysis for different time points. The calibrated model was used to predict the temporal variability in contributions to stream flow from the hillslope springs and soil water flows. The overall split ranged from 57%:43% spring water:soil water in the upper eastern subcatchment, to 76%:24% in the upper western subcatchment. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

8.
Despite the strong interaction between surface and subsurface waters, groundwater flow representation is often oversimplified in hydrological models. For instance, the interplay between local or shallow aquifers and deeper regional‐scale aquifers is typically neglected. In this work, a novel hillslope‐based catchment model for the simulation of combined shallow and deep groundwater flow is presented. The model consists of the hillslope‐storage Boussinesq (hsB) model representing shallow groundwater flow and an analytic element (AE) model representing deep regional groundwater flow. The component models are iteratively coupled via a leakage term based on Darcy's law, representing delayed recharge to the regional aquifer through a low conductivity layer. Simulations on synthetic single hillslopes and on a two‐hillslope open‐book catchment are presented, and the results are compared against a benchmark three‐dimensional Richards equation model. The impact of hydraulic conductivity, hillslope plan geometry (uniform, convergent, divergent), and hillslope inclination (0.2%, 5%, and 30%) under drainage and recharge conditions are examined. On the single hillslopes, good matches for heads, hydrographs, and exchange fluxes are generally obtained, with the most significant differences in outflows and heads observed for the 30% slope and for hillslopes with convergent geometry. On the open‐book catchment, cumulative outflows are overestimated by 1–4%. Heads in the confined and unconfined aquifers are adequately reproduced throughout the catchment, whereas exchange fluxes are found to be very sensitive to the hillslope drainable porosity. The new model is highly efficient computationally compared to the benchmark model. The coupled hsB/AE model represents an alternative to commonly used groundwater flow representations in hydrological models, of particular appeal when surface–subsurface exchanges, local aquifer–regional aquifer interactions, and low flows play a key role in a watershed's dynamics. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

9.
While most studies focus on the effect of soil pipes on hillslope stability, this present study investigates the impact of landsliding on pipe development. It is hypothesized that poorly drained active and dormant landslides change the hillslope hydrology through (i) surface flow obstruction, by changing topography, as well as (ii) subsurface flow obstruction by tilting less‐permeable clay‐rich substrates. Hence, new preferential flow paths are created at reverse slopes within the landslide zone and at the boundary of the landslide, enhancing pipe formation. This study aims at a better understanding of the interaction between collapsed pipe (CP) occurrence and landslide (LS) occurrence in the Flemish Ardennes (Belgium) by comparing their respective spatial patterns. At least 24.5% of the 139 sites with CP were related to the occurrence of an observed LS. Poorly drained LS may create favourable conditions for pipe development. Outside LS, natural and anthropogenic (e.g. broken field drains, road drainage) causes may result in concentrated subsurface flow, resulting in pipe development. No evidence was found that pipe development enhanced LS, probably because the subsurface drainage discharge generated upslope of the LS is too low. Even when pipes become blocked, it is more likely that new pipes develop and new collapses occur than they trigger or reactivate LS. A conceptual model is presented summarizing all elements that influence piping erosion in the Flemish Ardennes, including the role of LS. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

10.
Hillslopes have complex three‐dimensional shapes that are characterized by their plan shape, profile curvature of surface and bedrock, and soil depth. To investigate the stability of complex hillslopes (with different slope curvatures and plan shapes), we combine the hillslope‐storage Boussinesq (HSB) model with the infinite slope stability method. The HSB model is based on the continuity and Darcy equations expressed in terms of storage along the hillslope. Solutions of the HSB equation account explicitly for plan shape by introducing the hillslope width function and for profile curvature through the bedrock slope angle and the hillslope soil depth function. The presented model is composed of three parts: a topography model conceptualizing three‐dimensional soil mantled landscapes, a dynamic hydrology model for shallow subsurface flow and water table depth (HSB model) and an infinite slope stability method based on the Mohr–Coulomb failure law. The resulting hillslope‐storage Boussinesq stability model (HSB‐SM) is able to simulate rain‐induced shallow landsliding on hillslopes with non‐constant bedrock slope and non‐parallel plan shape. We apply the model to nine characteristic hillslope types with three different profile curvatures (concave, straight, convex) and three different plan shapes (convergent, parallel, divergent). In the presented model, the unsaturated storage has been calculated based on the unit head gradient assumption. To relax this assumption and to investigate the effect of neglecting the variations of unsaturated storage on the assessment of slope stability in the transient case, we also combine a coupled model of saturated and unsaturated storage and the infinite slope stability method. The results show that the variations of the unsaturated zone storage do not play a critical role in hillslope stability. Therefore, it can be concluded that the presented dynamic slope stability model (HSB‐SM) can be used safely for slope stability analysis on complex hillslopes. Our results show that after a certain period of rainfall the convergent hillslopes with concave and straight profiles become unstable more quickly than others, whilst divergent convex hillslopes remain stable (even after intense rainfall). In addition, the relation between subsurface flow and hillslope stability has been investigated. Our analyses show that the minimum safety factor (FS) occurs when the rate of subsurface flow is a maximum. In fact, by increasing the subsurface flow, stability decreases for all hillslope shapes. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

11.
Water percolation and flow processes in subsurface geologic media play an important role in determining the water source for plants and the transport of contaminants or nutrients, which is essential for water resource management and the development of measures for pollution mitigation. During June 2013, the dynamics of the rainwater, soil water, subsurface flows and groundwater in a shallow Entisol on sloping farmland were monitored using a hydrometric and isotopic approach. The results showed that effective mixing of rainwater and soil water occurred in hours. The rebound phenomenon of δD profiles in soils showed that most isotope‐depleted rainwater largely bypassed the soil matrix when the water saturation in the soil was high. Preferential‐flow, which was the dominant water movement pattern in the vadose zone, occurred through the whole soil profile, and infrequent piston‐flow was mainly found at 20–40 cm in depth. The interflow in the soil layer, composed of 75.2% rainwater, was only generated when the soil profile had been saturated. Underflow in the fractured mudrock was the dominant flow type in this hillslope, and outflow was dominated by base flow (groundwater flow) with a mean contribution of 76.7%. The generation mechanism of underflow was groundwater ridging, which was superimposed upon preferential‐flow composed mainly of rainwater. The quick mixing process of rainwater and soil water and the rapid movement of the mixture through preferential channels in the study soil, which shows a typical bimodal pore size distribution, can explain the prompt release of pre‐event water in subsurface flow. Water sources of subsurface flows at peak discharge could be affected by the antecedent soil water content, rain characteristics and antecedent groundwater levels. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

12.
Information on the spatial and temporal origin of runoff entering the channel during a storm event would be valuable in understanding the physical dynamics of catchment hydrology; this knowledge could be used to help design flood defences and diffuse pollution mitigation strategies. The majority of distributed hydrological models give information on the amount of flow leaving a catchment and the pattern of fluxes within the catchment. However, these models do not give any precise information on the origin of runoff within the catchment. The spatial and temporal distribution of runoff sources is particularly intricate in semi‐arid catchments, where there are complex interactions between runoff generation, transmission and re‐infiltration over short temporal scales. Agents are software components that are capable of moving through and responding to their local environment. In this application, the agents trace the path taken by water through the catchment. They have information on their local environment and on the basis of this information make decisions on where to move. Within a given model iteration, the agents are able to stay in the current cell, infiltrate into the soil or flow into a neighbouring cell. The information on the current state of the hydrological environment is provided by the environment generator. In this application, the Connectivity of Runoff Model (CRUM) has been used to generate the environment. CRUM is a physically based, distributed, dynamic hydrology model, which considers the hydrological processes relevant for a semi‐arid environment at the temporal scale of a single storm event. During the storm event, agents are introduced into the model across the catchment; they trace the flows of water and store information on the flow pathways. Therefore, this modelling approach is capable of giving a novel picture of the temporal and spatial dynamics of flow generation and transmission during a storm event. This is possible by extracting the pathways taken by the agents at different time slices during the storm. The agent based modelling approach has been applied to two small catchments in South East Spain. The modelling approach showed that the two catchments responded differently to the same rainfall event due to the differences in the runoff generation and overland flow connectivity between the two catchments. The model also showed that the time of travel to the nearest flow concentration is extremely important for determining the connectivity of a point in the landscape with the catchment outflow. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

13.
Climate change threatens water resources in snowmelt‐dependent regions by altering the fraction of snow and rain and spurring an earlier snowmelt season. The bulk of hydrological research has focused on forecasting response in streamflow volumes and timing to a shrinking snowpack; however, the degree to which subsurface storage offsets the loss of snow storage in various alpine geologic settings, i.e. the hydrogeologic buffering capacity, is still largely unknown. We address this research need by assessing the affects of climate change on storage and runoff generation for two distinct hydrogeologic settings present in alpine systems: a low storage granitic and a greater storage volcanic hillslope. We use a physically based integrated hydrologic model fully coupled to a land surface model to run a base scenario and then three progressive warming scenarios, and account for the shifts in each component of the water budget. For hillslopes with greater water retention, the larger storage volcanic hillslope buffered streamflow volumes and timing, but at the cost of greater reductions in groundwater storage relative to the low storage granite hillslope. We found that the results were highly sensitive to the unsaturated zone retention parameters, which in the case of alpine systems can be a mix of matrix or fracture flow. The presence of fractures and thus less retention in the unsaturated zone significantly decreased the reduction in recharge and runoff for the volcanic hillslope in climate warming scenarios. This approach highlights the importance of incorporating physically based subsurface flow in to alpine hydrology models, and our findings provide ways forward to arrive at a conceptual model that is both consistent with geology and hydrologic principles. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

14.
The objective of this research is to improve the comprehension of the hydrological behaviour of natural catchments. The main originality of this work is to associate different types of measurement in order to obtain a better vision of hydrological processes responsible for streamflow generation. First, the hydrological behaviour is studied at the catchment scale by the application of environmental tracing. A three‐component mixing model based on the silica and calcium concentrations of water allows one to distinguish the contributions of direct precipitation, soil water and groundwater during flood generation. Despite the different hydrological responses observed between the four subcatchments studied, a common behaviour is apparent. Soil contribution increases with a rise in the basin humidity. The subsurface water dominates the generation of major floods, which occur in wet conditions. In order to discover the processes responsible for the important soil water contributions, a large‐scale time‐domain reflectometry experiment (64 probes) was conducted. On the whole, this experiment indicates that the water flow in soil is spatially quite heterogeneous and depends on local properties. Macropore flows were clearly identified during a rainfall simulator experiment. Preferential flows may be responsible for the important contribution of soil water and the heterogeneity of the soil moisture. In order to test this hypothesis, a dye‐tracing experiment was done. This new investigation confirms that an important part of soil water reaches the stream by preferential flows. So as to synthesize all these observations, a conceptual model is proposed. This model respects both the hydrochemical responses highlighted by the environmental tracing experiment and the observations done at the local scale. This conceptual model suggests that the important contribution of soil water is due to the extent of the hydrographic network and the role of preferential flows. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

15.
Models must effectively represent velocities and celerities if they are to address the old water paradox. Celerity information is recorded indirectly in hydrograph observations, whereas velocity information is more difficult to measure and simulate effectively, requiring additional assumptions and parameters. Velocity information can be obtained from tracer experiments, but we often lack information on the influence of soil properties on tracer mobility. This study features a combined experimental and modelling approach geared towards the evaluation of different structures in the multiple interacting pathways (MIPs) model and validates the representation of velocities with laboratory tracer experiments using an undisturbed soil column. Results indicate that the soil microstructure was modified during the experiment. Soil water velocities were represented using MIPs, testing how the (a) shape of the velocity distribution, (b) transition probability matrices (TPMs), (c) presence of immobile storage, and (d) nonstationary field capacity influence the model's performance. In MIPs, the TPM controls exhanges of water between pathways. In our experiment, MIPs were able to provide a good representation of the pattern of outflow. The results show that the connectedness of the faster pathways is important for controlling the percolation of water and tracer through the soil. The best model performance was obtained with the inclusion of immobile storage, but simulations were poor under the assumption of stationary parameters. The entire experiment was adequately simulated once a time‐variable field capacity parameter was introduced, supporting the need for including the effects of soil microstructure changes observed during the experiment.  相似文献   

16.
17.
Traditional Boussinesq or kinematic simulations of interflow (i.e., lateral subsurface flow) assume no leakage through the impeding layer and require a no-flow boundary condition at the ridge top. However, recent analyses of many interflow-producing landscapes indicate that leaky impeding layers are common, that most interflow percolates well before reaching the toe slope, and therefore, the downslope contributing length is shorter than the hillslope length. In watersheds characterised by perched interflow over a low conductivity layer through permeable topsoil, interflow with percolation may be modelled with a kinematic wave model using a mobile upslope boundary condition defining the hillslope portion contributing interflow to valleys. Here, we developed and applied a dynamic interflow model to simulate interflow using a downslope travel distance concept such that only the active contributing length is modelled at any time. The model defines a variable active area based on the depth of the perched layer, the topographic slope and the ratio of the hydraulic conductivity of topsoil to that of the impeding layer. It incorporates a two-layer soil moisture accounting water balance analysis, a pedo-transfer function, and percolation and evaporation routines to predict interflow rates in continuous and event-based scenarios. We tested the modelling concept on two sets of data (2-year dataset of rainfall observations for the continuous simulation and a multi-day irrigation experiment for the event simulation) from a 121-m-long open interflow collection trench on an experimental hillslope at the Savannah River Site, South Carolina. The continuous model simulation partially represented the observed interflow hydrograph and perched water depth in the experimental hillslope with correlation coefficients of 0.85 and 0.35, respectively. Model performance improved significantly at event-scale analysis. The modelling approach realistically represents interflow dynamics in hillslopes with leaky impeding layers and can be integrated into catchment-scale hydrology models for more detailed hillslope process modelling.  相似文献   

18.
19.
The variability of hillslope form and function is examined experimentally using a simple model catchment in which most landscape development parameters are either known or controlled. It is demonstrated that there is considerable variability in sediment output from similar catchments, subjected to the same hydrological processes, and for which the initial hillslope profiles are the same. The results demonstrate that, in the case of catchments with a linear initial hillslope profile, the sediment output is initially high but reduces through time, whereas for a concave initial profile the sediment output was smaller and relatively constant. Concave hillslope profiles also displayed reduced sediment output when compared with linear slopes with the same overall slope. Using this experimental model catchment data, the SIBERIA landscape evolution model was tested for its ability to predict temporal sediment transport. When calibrated for the rainfall and erodible material, SIBERIA is able to simulate mean temporal sediment output for the experimental catchment over a range of hillslope profiles and rainfall intensities. SIBERIA is also able to match the hillslope profile of the experimental catchments. The results of the study provide confidence in the ability of SIBERIA to predict temporal sediment output. The experimental and modelling data also demonstrate that, even with all geomorphic and hydrological variables being known and/or controlled, there is still a need for long‐term stream gauging to obtain reliable assessments of field catchment hydrology and sediment transport. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

20.
There is considerable interest in large‐scale spatial patterns of sediment transport in catchments, and this topic is often approached using terrain‐based modelling. In such models topography influences the discharge of overland flow and its sediment transport capacity. The sediment transport capacity of overland flow is commonly expressed as a power function of slope and discharge (i.e. qs=k1qβSγ). The relationship between discharge and contributing area can also be expressed as a power function. Several reviews reveal a limited range of values for the two exponents β and γ. In this paper we examine the sensitivity of catchment‐scale patterns of sediment delivery to valley floors to a range of sediment transport capacity and hillslope hydrology parameterizations, using two catchments on the southern tablelands of New South Wales. The results indicate that, over the limited range of β and γ identified within the literature, sediment deliveries to valley floors across the two catchments are similar for all but one of five sediment transport capacity relationships. The patterns are dominated by the trend in slope through each catchment. The sensitivity to hillslope hydrology of predicted sediment delivery patterns is strong in the catchment with systematic variation in unit hillslope area, and weak in the catchment for which there are no systematic trends in unit hillslope area. We believe there is less experimental evidence to restrict choice of hillslope hydrology parameters than there is for sediment transport capacity. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号