首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 93 毫秒
1.
Spreading‐basin methods have resulted in more than 130 million cubic metres of recharge to the unconfined Navajo Sandstone of southern Utah in the past decade, but infiltration rates have slowed in recent years because of reduced hydraulic gradients and (or) clogging. Trench infiltration is a promising alternative technique for increasing recharge and minimizing evaporation. This paper uses a variably saturated flow model to further investigate the relative importance of the following variables on rates of trench infiltration to unconfined aquifers: saturated hydraulic conductivity, trench spacing and dimensions, initial water‐table depth, alternate wet/dry periods, and number of parallel trenches. Modelling results showed (1) increased infiltration with higher hydraulic conductivity, deeper initial water tables, and larger spacing between parallel trenches, (2) deeper or wider trenches do not substantially increase infiltration, (3) alternating wet/dry periods result in less overall infiltration than keeping the trenches continuously full, and (4) larger numbers of parallel trenches within a fixed area increases infiltration but with a diminishing effect as trench spacing becomes tighter. An empirical equation for estimating expected trench infiltration rates as a function of hydraulic conductivity and initial water‐table depth was derived and can be used for evaluating feasibility of trench infiltration in other hydrogeologic settings. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

2.
Infiltration rate is the key parameter that describes how water moves from the surface into a groundwater aquifer during managed aquifer recharge (MAR). Characterization of infiltration rate heterogeneity in space and time is valuable information for MAR system operation. In this study, we utilized fiber optic distributed temperature sensing (FO‐DTS) observations and the phase shift of the diurnal temperature signal between two vertically co‐located fiber optic cables to characterize infiltration rate spatially and temporally in a MAR basin. The FO‐DTS measurements revealed spatial heterogeneity of infiltration rate: approximately 78% of the recharge water infiltrated through 50% of the pond bottom on average. We also introduced a metric for quantifying how the infiltration rate in a recharge pond changes over time, which enables FO‐DTS to be used as a method for monitoring MAR and informing maintenance decisions. By monitoring this metric, we found high‐spatial variability in how rapidly infiltration rate changed during the test period. We attributed this variability to biological pore clogging and found a relationship between high initial infiltration rate and the most rapid pore clogging. We found a strong relationship (R2 = 0.8) between observed maximum infiltration rates and electrical resistivity measurements from electrical resistivity tomography data taken in the same basin when dry. This result shows that the combined acquisition of DTS and ERT data can improve the design and operation of a MAR pond significantly by providing the critical information needed about spatial variability in parameters controlling infiltration rates.  相似文献   

3.
Managed aquifer recharge is used to augment groundwater resources and provide resiliency to water supplies threatened by prolonged droughts. It is important that recharge facilities operate at their maximum efficiency to increase the volume of water stored for future use. In this study, we evaluate the use of distributed temperature sensing (DTS) technology as a tool to measure high-resolution infiltration rates at a large-scale recharge facility. Fiber optic cable was laid out inside a spreading basin in a spiral pattern, at two different depths. The cables measured the propagation of diurnal surface water temperature oscillations into the basin depth. The rate of heat propagation is proportional to the velocity of the water, making it possible to estimate the infiltration rate from the temperature measurements. Our results showed that the infiltration rate calculated from DTS, averaged over the entire basin, was within 5% of the infiltration rate calculated using a conventional metering method. The high-resolution data obtained from DTS, both spatially and temporally, revealed heterogeneous infiltration rates throughout the basin; furthermore, tracking the evolution of infiltration rates over time revealed regions with consistently high infiltration rates, regions with consistently low infiltration rates, and regions that evolved from high to low rates, which suggested clogging within that region. Water utilities can take advantage of the high-resolution information obtained from DTS to better manage recharge basins and make decisions about cleaning schedule, frequency, and extent, leading to improved basin management strategies, reduced O&M costs, and increased groundwater recharge.  相似文献   

4.
Gravity-driven infiltration into the shallow subsurface via small-diameter wells (SDWs), i.e., wells with an inner diameter smaller than 7.5 cm (3 inches) and no gravel pack) has proven to be a cost-efficient and flexible tool for managed aquifer recharge (MAR), as it provides relatively high recharge rates with minimal construction effort. SDWs have a significantly smaller open filter area than larger diameter wells with gravel pack, making the infiltration of low-quality waters through these wells more at risk clogging. To investigate their susceptibility for biological and physical clogging, 24 physical models with different well setups were evaluated by infiltrating either nutrient-poor but turbid water or nutrient-rich but clear water. The experiments showed that smaller diameters and the lack of a gravel pack increase the well's susceptibility to both kinds of clogging. However, this effect was observed to be much more pronounced for physical than for biological clogging. Our conclusion is that SDWs show severe disadvantages with respect to the infiltration of highly turbid waters in comparison to large diameter wells with a gravel pack. Nevertheless, this disadvantage is much less severe when it comes to the infiltration of clear but nutrient-rich waters (e.g., treated wastewater). Depending on the economic and geological circumstances of a MAR-project, this disadvantage could be outweighed by the significantly lower construction costs of SDWs.  相似文献   

5.
Artificial recharge of groundwater is an increasingly important method for augmenting groundwater supply and can have a positive or negative influence on the quality of water resources. We instrumented a managed aquifer recharge (MAR) pond in central coastal California to assess how patterns of infiltration and recharge affect the load of nitrate delivered to the underlying aquifer. The concentration of nitrate in infiltrating water consistently decreased during passage through the first metre of subsurface soils. Enrichment of 18O and 15 N in the residual nitrate in infiltrating water proceeded in a ratio of 1:2, indicating that denitrification plays a significant role in the quantitative reduction of nutrients exported during infiltration through shallow soils. The extent and rate of nitrate removal was spatially and temporally variable across the bottom of the recharge pond, with 30% to 60% of the nitrate load being removed over the first 6 weeks of managed aquifer recharge operation. During the period of highest N loading to the system, when the average infiltration rate was > 1 m/day, the recharge pond achieved a load reduction efficiency of 7 kg NO3?‐N/day/ha, which compares favourably to nitrate load reductions achieved by treatment wetlands. Groundwater mounding and water composition below the recharge pond suggest that recharge and subsequent lateral transport occur heterogeneously in the underlying aquifer. Nitrate concentrations in the aquifer following infiltration were lowered primarily by dilution, with little evidence for additional denitrification occurring in the aquifer in comparison to high rates documented during shallow infiltration. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

6.
The Sandilands area of southeastern Manitoba contains an interlobate moraine that is a major ground water recharge area. Underlying the highly permeable sediments of the moraine are up to 100 m of till and the subcrop of the Winnipeg Formation, which contains a major sandstone aquifer. Ground water flow within the till is examined using high-resolution temperature profiles and solutions to the differential equation for heat flow in porous media. These analyses indicate that recharge to the sandstone aquifer is occurring at a rate of approximately 2 x 10(-8) m/sec beneath the moraine, which is in agreement with recharge rates determined by conventional ground water hydraulics (10(-7) to 10(-10)(m/sec) and another study using multiple environmental tracers (1 x 10(-9) to 6 X 10(-9) m/sec). The use of temperature to determine ground water flux is not limited by half-lives as many environmental tracers are, and this allows for cost-effective estimation of recharge and discharge rates over longer periods.  相似文献   

7.
Interactions between groundwater mounds caused by a geologic layer contrast affect the efficiency of managed aquifer recharge in arid areas. However, research has rarely examined the roles of groundwater mounding size variations on soil water dynamics in a stratified vadose zone in response to a sustained infiltration source. Numerical experiments were conducted on a two-dimensional vertical-section domain using HYDRUS software to simulate the behaviours of two adjacent (upper and lower) groundwater mounds underlying an infiltration basin subjected to clay loam and sandy alternately-layered soil profiles. The model successfully predicted the volume and extent of perched water and approximated vertical travel times during events generating downward fluxes from the surface injection. The response time of the mounding width (lateral extension) to the surface injection was delayed as compared to that of the mounding height (vertical extension), especially for the lower water mound. The mounding heights and widths show a strongly positive correlation with the infiltration rates of both high- and low-permeability layers where the injected water mounded, while the water storage amounts in the high- and low-permeability layers were governed by the mounding height and width, respectively. Exploratory simulations were then employed to assess the dependence of groundwater mounding behaviours and recharge performances on surface injection strategies. Results suggest that, by reducing injection rate or shortening injection duration, the near-term fraction of the surface injection converted to deep recharge is likely to be increased due to the narrowed groundwater mounding size, which would be limited by the water-retarding effect of layer contrasts. This study has important implications for predicting and understanding multilayered groundwater mounding behaviours and associated water mass balance under the geologic stratification, and is expected to aid in optimizing the infiltration basin operation for aquifer recharge.  相似文献   

8.
In Belgium, IWVA uses managed aquifer recharge (MAR) to recharge the aquifer with treated wastewater generated from the communities to sustain the potable water supply on the Belgian coast. This MAR facility is faced with a challenge of reduced infiltration rates during the winter season when pond water temperatures near 4°C. This study involves the identification of the predominant factor influencing the rate of infiltration through the pond bed. Several factors, including pumping rates, natural recharge, tidal influences of the North Sea and pond-water temperature, were identified as potential causes for variation of the recharge rate. Correlation statistics and linear regression analysis were used to determine the sensitivity of the infiltration rate to the aforementioned factors. Two groundwater flow models were developed in visual MODFLOW to simulate the water movement under the pond bed and to obtain the differences in flux to track the effects of variation of hydraulic conductivity during the two seasons. A 32% reduction in vertical hydraulic gradient in the top portion of the aquifer was observed in winter, causing the recharge rates to fluctuate. Results showed that water temperature caused a 30% increase in hydraulic conductivity in summer as compared with winter and has the maximum impact on infiltration rate. Cyclic variations in water viscosity, occurring because of seasonal temperature changes, influence the saturated hydraulic conductivity of the pond bed. Results from the models confirm the impact on infiltration rate by temperature-influenced hydraulic conductivity.  相似文献   

9.
A groundwater recharge process of heterogeneous hard rock aquifer in the Moole Hole experimental watershed, south India, is being studied to understand the groundwater flow behaviour. Significant seasonal variations in groundwater level are observed in boreholes located at the outlet area indicating that the recharge process is probably taking place below intermittent streams. In order to localize groundwater recharge zones and to optimize implementation of boreholes, a geophysical survey was carried out during and after the 2004 monsoon across the outlet zone. Magnetic resonance soundings (MRS) have been performed to characterize the aquifer and measure groundwater level depletion. The results of MRS are consistent with the observation in boreholes, but it suffers from degraded lateral resolution. A better resolution of the regolith/bedrock interface is achieved using electrical resistivity tomography (ERT). ERT results are confirmed by resistivity logging in the boreholes. ERT surveys have been carried out twice—before and during the monsoon—across the stream area. The major feature of recharge is revealed below the stream with a decrease by 80% of the calculated resistivity. The time‐lapse ERT also shows unexpected variations at a depth of 20 m below the slopes that could have been interpreted as a consequence of a deep seasonal water flow. However, in this area time‐lapse ERT does not match with borehole data. Numerical modelling shows that in the presence of a shallow water infiltration, an inversion artefact may take place thus limiting the reliability of time‐lapse ERT. A combination of ERT with MRS provides valuable information on structure and aquifer properties respectively, giving a clue for a conceptual model of the recharge process: infiltration takes place in the conductive fractured‐fissured part of the bedrock underlying the stream and clayey material present on both sides slows down its lateral dissipation. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

10.
Managed aquifer recharge is an effective strategy for urban stormwater management. Chemical ions are normally retained in stormwater and groundwater and may accelerate clogging during the recharge process. However, the effect of water chemistry on physical clogging has not previously been investigated. In this study, we investigated the hydrogeochemical mechanism of saturated porous media clogging in a series of column experiments. The column was packed with river sand and added suspensions of kaolinite particles. Calcium chloride and sodium chloride are used as representative ions to study chemical effects. We found that an increase in ionic strength resulted in retention of kaolinite solids in the column, with a breakthrough peak of C/C0 value of 1 to 0.2. The corresponding hydraulic conductivity decreased with increased solids clogging. Divalent cations were also found to have a greater influence on kaolinite particle clogging than monovalent cations. The enhanced hydrochemical-related clogging was caused by kaolinite solids flocculating and increasing the deposition rate coefficient by 1 to 2 times in high ionic strength conditions. Three clogging mechanisms of kaolinite solids are proposed: surface filtration, inner blocking, and attachment. This study further deepens the understanding of the mechanisms of solids clogging during aquifer recharge and demonstrates the significance of ionic strength on recharge clogging risk assessments.  相似文献   

11.
In South Korea, a significant amount of groundwater is used for the heating of water-curtain insulated greenhouses during the winter dry season, which had led to problems of groundwater depletion. A managed aquifer recharge (MAR) project is currently underway with the goal of preventing such groundwater depletion in a typical cultivation area, located on an alluvial aquifer near the Nam River. In the present study, FEFLOW, a three-dimensional finite element model, was used to evaluate different strategies for MAR of the cultivation areas. A conceptual model was developed to simulate the stream-aquifer dynamics under the influence of seasonal groundwater pumping and MAR. The optimal rates and duration of MAR were assessed by analyzing the recovery of the groundwater levels and the change in the groundwater temperature. The simulation results indicate that a MAR rate of 8000 m3/d effectively restores the groundwater level when the injection wells are located inside the groundwater depletion area. It is also demonstrated that starting the MAR before the beginning of the seasonal pumping is more effective. Riverbank filtration is preferable for securing the injection water owing to plentiful source of induced recharge from the river. Locating the pumping wells adjacent to the river where there are thick permeable layers could be a good strategy for minimizing decreases in the groundwater level and temperature.  相似文献   

12.
Design of managed aquifer recharge (MAR) for augmentation of groundwater resources often lacks detailed data, and simple diagnostic tools for evaluation of the water table in a broad range of parameters are needed. In many large‐scale MAR projects, the effect of a regional aquifer base dip cannot be ignored due to the scale of recharge sources (e.g., wadis, streams, reservoirs). However, Hantush's (1967) solution for a horizontal aquifer base is commonly used. To address sloping aquifers, a new closed‐form analytical solution for water table mound accounts for the geometry and orientation of recharge sources at the land surface with respect to the aquifer base dip. The solution, based on the Dupiuit‐Forchheimer approximation, Green's function method, and coordinate transformations is convenient for computing. This solution reveals important MAR traits in variance with Hantush's solution: mounding is limited in time and space; elevation of the mound is strongly affected by the dip angle; and the peak of the mound moves over time. These findings have important practical implications for assessment of various MAR scenarios, including waterlogging potential and determining proper rates of recharge. Computations are illustrated for several characteristic MAR settings.  相似文献   

13.
Aeolian abrasional, depositional and deflational features indicate exceptionally strong southwesterly winds in a giant sandstone weathering pit in Grand Staircase Escalante Monument, about 22 km southeast of Escalante, Utah. The 60 m wide, 5–20 m deep pit has developed near the summit of a broad, barren 160‐m‐high dome on the Lower Jurassic Navajo Sandstone. Unlike other giant weathering pits (10–30 m diameter) in the region, the bedrock floor of this pit is undulatory, and there is a cylindrical, 10‐m‐high rock pedestal in the centre of the pit. An active dune surrounds the central pedestal and at times has as much as 8 m of local relief. The dune shifts considerably over brief (<1 year) periods of time. Fine‐grained (<250 µm) dunal sand on the pit floor is periodically removed by deflation, leaving coarser sand (>250 µm) trapped in the pit. Dunal sand is typically derived from external sources (other than the pit walls and floor). Centimetre to metre‐scale abrasional features such as grooves, flutes and dedos occur on the bedrock walls and floor of the pit. These dedos and other streamlined aeolian sculpted host‐rock features occur in clusters and typically form in the lee of iron concretions. The dedos are similar to the controversial stalked blueberries on Mars. Above the western rim of the pit there is a 29‐m‐long, 5‐m‐wide aeolian groove with a fluted bedrock floor. A 1·2‐km‐long bedrock valley descends to the southwest from the pit and groove, amplifying southwesterly winds. Data from hand‐held anemometers suggest that southwesterly winds can be accelerated 200–300 per cent or more by local topography. Copyright © 2008 John Wiley and Sons, Ltd.  相似文献   

14.
Managed aquifer recharge is an effective method for utilizing excess flood flows, but clogging of porous media is a limiting factor in the implementation of this water storage technique. In recent years, much research on the physical clogging of porous media during artificial recharge has been conducted. However, the understanding of clogging due to silt‐sized suspended solids (SS) is still inadequate, especially under varying physical conditions. Here, we subjected sand columns to controlled rates of flow and SS suspensions to investigate the influence of media size, SS size, SS concentration, and flow velocity on the clogging of porous media by silt‐sized SS. The results show that the diameter ratio of SS particles to sand grains is the dominant factor influencing the position of physical clogging. As pore velocity increased, the mobility of silt‐sized SS was enhanced and retention in the porous media decreased noticeably. The spatial retention profiles in the porous media were found to vary greatly at different flow velocities. The SS concentration of the infiltrating suspension also dramatically influenced the mobility and deposition of silt‐sized SS particles, such that high concentrations accelerated the clogging process. As the different physical factors changed, the breakthrough curves and retention profiles of silt‐sized SS particles changed obviously and the mechanisms of retention differed. On the whole, clogging position is mainly determined by particle size ratio, but clogging rate is dominated by a variety of factors including particle size ratio, SS concentration, and flow velocity.  相似文献   

15.
Permeability reduction of infiltration media due to suspended solid (SS) clogging is the bane of groundwater artificial recharge. To overcome the clogging problem and advance the understanding of the process‐based spatial‐temporal evolution of SS clogging, a 1D laboratory column simulation was carried out, followed by numerical modelling of the experimental data in this study. It was found that clogging caused a reduction in the hydraulic conductivity (K) in the upper layer at the beginning and extended deeper to approximately 50 cm, and no reduction in K was detected below 52 cm throughout the experimental period of 129 hr. The most clogged layer spanned from the surface to a depth of 11 cm, and the middle 11–52 cm was characterized by a slight decrease in K. The clogging rates of the different layers decreased with the depth, which was based on data analysis, with the largest value of 0.038 hr?1 in the upper 1 cm. The overall K began to decrease from the surface layer and was increasingly affected by clogging with time. A mathematical model was established to simulate the SS clogging process evolution based on considerations of the attachments and detachments of particles. Then the model was applied to perform several scenario analyses after calibration and validation using the data obtained in the experiment. The simulation results indicated that the SS concentration was much more sensitive than the groundwater depth below the land surface, and 10 days of constant recharge is recommended as the disposal cycle of the clogged layer under the given conditions.  相似文献   

16.
Arsenic in groundwater is a serious problem in New England, particularly for domestic well owners drawing water from bedrock aquifers. The overlying glacial aquifer generally has waters with low arsenic concentrations but is less used because of frequent loss of well water during dry periods and the vulnerability to surface‐sourced bacterial contamination. An alternative, novel design for shallow wells in glacial aquifers is intended to draw water primarily from unconsolidated glacial deposits, while being resistant to drought conditions and surface contamination. Its use could greatly reduce exposure to arsenic through drinking water for domestic use. Hypothetical numerical models were used to investigate the potential hydraulic performance of the new well design in reducing arsenic exposure. The aquifer system was divided into two parts, an upper section representing the glacial sediments and a lower section representing the bedrock. The location of the well, recharge conditions, and hydraulic properties were systematically varied in a series of simulations and the potential for arsenic contamination was quantified by analyzing groundwater flow paths to the well. The greatest risk of arsenic contamination occurred when the hydraulic conductivity of the bedrock aquifer was high, or where there was upward flow from the bedrock aquifer because of the position of the well in the flow system.  相似文献   

17.
Simulating groundwater flow in basin‐fill aquifers of the semiarid southwestern United States commonly requires decisions about how to distribute aquifer recharge. Precipitation can recharge basin‐fill aquifers by direct infiltration and transport through faults and fractures in the high‐elevation areas, by flowing overland through high‐elevation areas to infiltrate at basin‐fill margins along mountain fronts, by flowing overland to infiltrate along ephemeral channels that often traverse basins in the area, or by some combination of these processes. The importance of accurately simulating recharge distributions is a current topic of discussion among hydrologists and water managers in the region, but no comparative study has been performed to analyze the effects of different recharge distributions on groundwater simulations. This study investigates the importance of the distribution of aquifer recharge in simulating regional groundwater flow in basin‐fill aquifers by calibrating a groundwater‐flow model to four different recharge distributions, all with the same total amount of recharge. Similarities are seen in results from steady‐state models for optimized hydraulic conductivity values, fit of simulated to observed hydraulic heads, and composite scaled sensitivities of conductivity parameter zones. Transient simulations with hypothetical storage properties and pumping rates produce similar capture rates and storage change results, but differences are noted in the rate of drawdown at some well locations owing to the differences in optimized hydraulic conductivity. Depending on whether the purpose of the groundwater model is to simulate changes in groundwater levels or changes in storage and capture, the distribution of aquifer recharge may or may not be of primary importance.  相似文献   

18.
Natural groundwater recharge is inherently difficult to quantify and predict, largely because it comprises a series of processes that are spatially distributed and temporally variable. Infiltration ponds used for managed aquifer recharge (MAR) provide an opportunity to quantify recharge processes across multiple scales under semi-controlled conditions. We instrumented a 3-ha MAR infiltration pond to measure and compare infiltration patterns determined using whole-pond and point-specific methods. Whole-pond infiltration was determined by closing a transient water budget (accounting for inputs, outputs, and changes in storage), whereas point-specific infiltration rates were determined using heat as a tracer and time series analysis at eight locations in the base of the pond. Whole-pond infiltration, normalized for wetted area, rose rapidly to more than 1.0 m/d at the start of MAR operations (increasing as pond stage rose), was sustained at high rates for the next 40 d, and then decreased to less than 0.1 m/d by the end of the recharge season. Point-specific infiltration rates indicated high spatial and temporal variability, with the mean of measured values generally being lower than rates indicated by whole-pond calculations. Colocated measurements of head gradients within saturated soils below the pond were combined with infiltration rates to calculate soil hydraulic conductivity. Observations indicate a brief period of increasing saturated hydraulic conductivity, followed by a decrease of one to two orders of magnitude during the next 50 to 75 d. Locations indicating the most rapid infiltration shifted laterally during MAR operation, and we suggest that infiltration may function as a "variable source area" processes, conceptually similar to catchment runoff.  相似文献   

19.
The objective of this paper was to provide new insights into processes affecting riverbank filtration (RBF). We consider a system with an inflatable dam installed for enhancing water production from downstream collector wells. Using a numerical model, we investigate the impact of groundwater pumping and dam operation on the hydrodynamics in the aquifer and water production. We focus our study on two processes that potentially limit water production of an RBF system: the development of an unsaturated zone and riverbed clogging. We quantify river clogging by calibrating a time‐dependent riverbed permeability function based on knowledge of pumping rate, river stage, and temperature. The dynamics of the estimated riverbed permeability reflects clogging and scouring mechanisms. Our results indicate that (1) riverbed permeability is the dominant factor affecting infiltration needed for sustainable RBF production; (2) dam operation can influence pumping efficiency and prevent the development of an unsaturated zone beneath the riverbed only under conditions of sufficient riverbed permeability; (3) slow river velocity, caused by dam raising during summer months, may lead to sedimentation and deposition of fine‐grained material within the riverbed, which may clog the riverbed, limiting recharge to the collector wells and contributing to the development of an unsaturated zone beneath the riverbed; and (4) higher river flow velocities, caused by dam lowering during winter storms, scour the riverbed and thus increase its permeability. These insights can be used as the basis for developing sustainable water management of a RBF system.  相似文献   

20.
Stream–aquifer interaction plays a vital role in the water cycle, and a proper study of this interaction is needed for understanding groundwater recharge, contaminants migration, and for managing surface water and groundwater resources. A model‐based investigation of a field experiment in a riparian zone of the Schwarzbach river, a tributary of the Rhine River in Germany, was conducted to understand stream–aquifer interaction under alternative gaining and losing streamflow conditions. An equivalent streambed permeability, estimated by inverting aquifer responses to flood waves, shows that streambed permeability increased during infiltration of stream water to aquifer and decreased during exfiltration. Aquifer permeability realizations generated by multiple‐point geostatistics exhibit a high degree of heterogeneity and anisotropy. A coupled surface water groundwater flow model was developed incorporating the time‐varying streambed permeability and heterogeneous aquifer permeability realizations. The model was able to reproduce varying pressure heads at two observation wells near the stream over a period of 55 days. A Monte Carlo analysis was also carried out to simulate groundwater flow, its age distribution, and the release of a hypothetical wastewater plume into the aquifer from the stream. Results of this uncertainty analysis suggest (a) stream–aquifer exchange flux during the infiltration periods was constrained by aquifer permeability; (b) during exfiltration, this flux was constrained by the reduced streambed permeability; (c) the effect of temporally variable streambed permeability and aquifer heterogeneity were found important to improve the accurate capture of the uncertainty; and (d) probabilistic infiltration paths in the aquifer reveal that such pathways and the associated prediction of the extent of the contaminant plume are highly dependent on aquifer heterogeneity.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号