共查询到20条相似文献，搜索用时 437 毫秒
1.
Akira Murakami Takayuki Shuku Shin‐ichi Nishimura Kazunori Fujisawa Kazuyuki Nakamura 《国际地质力学数值与分析法杂志》2013,37(11):1642-1669
A computational method, incorporating the finite element model (FEM) into data assimilation using the particle filter, is presented for identifying elasto‐plastic material properties based on sequential measurements under the known changing traction boundary conditions to overcome some difficulties in identifying the parameters for elasto‐plastic problems from which the existing inverse analysis strategies have suffered. A soil–water coupled problem, which uses the elasto‐plastic constitutive model, is dealt with as the geotechnical application. Measured data on the settlement and the pore pressure are obtained from a synthetic FEM computation as the forward problem under the known parameters to be identified for both the element tests and the ground behavior during the embankment construction sequence. Parameter identification for elasto‐plastic problems, such as soil behavior, should be made by considering the measurements of deformation and/or pore pressure step by step from the initial stage of construction and throughout the deformation history under the changing traction boundary conditions because of the embankment or the excavation because the ground behavior is highly dependent on the loading history. Thus, it appears that sequential data assimilation techniques, such as the particle filter, are the preferable tools that can provide estimates of the state variables, that is, deformation, pore pressure, and unknown parameters, for the constitutive model in geotechnical practice. The present paper discusses the priority of the particle filter in its application to initial/boundary value problems for elasto‐plastic materials and demonstrates a couple of numerical examples. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
2.
软黏土层一维有限应变固结的超静孔压消散研究 总被引：1，自引：0，他引：1
根据土力学固结理论计算分析软黏土层固结过程的超静孔隙水压力值,确定软黏土体固结过程的强度增长,对排水固结法处理软土地基至关重要。软黏土层固结过程中土体变形较大时,有限应变固结理论和小应变固结理论计算分析软黏土固结所得结果差异较大。利用非线性有限元法及程序,通过对软黏土层固结工程算例的计算结果分析,研究了有限应变固结理论和小应变固结理论计算分析软黏土层一维固结超静孔压值消散的差异;探讨了软黏土体一维固结过程中,几何非线性、土体渗透性变化和压缩性变化对超静孔隙水压力消散的影响。研究结果表明,当土体的变形较大时,有限应变固结理论计算出的超静孔压要比小应变固结理论得到的值消散的更快。考虑土体固结过程中渗透性的变化时,超静孔压消散变慢;可用软黏土渗透性变化指数ck 反映渗透性变化对超静孔压消散的影响,渗透性变化指数ck值越小、超静孔压消散越慢。固结过程中软黏土压缩性的大小及变化也影响超静孔压的消散,可用软黏土的压缩指数cc反映固结过程中压缩性的大小及变化对超静孔压消散的影响,软黏土的压缩指数cc越小,固结过程软黏土层中的超静孔压消散越快。 相似文献
3.
The mechanical behavior of natural clays is affected by their inherent anisotropy and metastable soil structure. A simple hierarchical model that considers initial anisotropy and destructuration was formulated within the framework of critical state soil mechanics. In the proposed model, stress sensitivity and a destructuration index were introduced to account for the degree of bonding and the rate of destructuration, respectively. An inclined yield surface was used to incorporate the effect of the initial anisotropy. The proposed model can be degenerated to the Modified Cam Clay model by setting the initial stress sensitivity equal to unity and using a horizontal yield surface. Reasonable agreement between the model simulations and the experimental results on a variety of stress paths demonstrated that the proposed model can capture well the deformation behavior of natural clay and reconstituted soil. The model was implemented into the finite element program for the numerical analysis of an embankment on soft clay improved with prefabricated vertical drains. The numerical predictions were compared with the field-measured data in terms of embankment settlement. Additionally, the numerical simulations were analyzed in terms of horizontal displacements, excess pore water pressure, mean effective stress and volumetric strain. All of the simulations and comparisons indicate the importance of considering the effects of plastic anisotropy, interparticle bonding and destructuration caused by loading beyond yield stress and field disturbance in analyzing the behavior of an embankment on natural soft clay. 相似文献
4.
A computational framework is presented for dynamic strain localization and deformation analyses of water‐saturated clay by using a cyclic elasto‐viscoplastic constitutive model. In the model, the nonlinear kinematic hardening rule and softening due to the structural degradation of soil particles are considered. In order to appropriately simulate the large deformation phenomenon in strain localization analysis, the dynamic finite element formulation for a two‐phase mixture is derived in the updated Lagrangian framework. The shear band development is shown through the distributions of viscoplastic shear strain, the axial strain, the mean effective stress, and the pore water pressure in a normally consolidated clay specimen. From the local stress–strain relations, more brittleness is found inside the shear bands than outside of them. The effects of partially drained conditions and mesh‐size dependency on the shear banding are also investigated. The effect of a partially drained boundary is found to be insignificant on the dynamic shear band propagation because of the rapid rate of applied loading and low permeability of the clay. Using the finer mesh results in slightly narrower shear bands; nonetheless, the results manifest convergency through the mesh refinement in terms of the overall shape of shear banding and stress–strain relations. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
5.
软土地基路堤施工控制的离心模拟试验研究 总被引：1，自引：0，他引：1
软土路基上快速填筑路堤时的稳定控制是非常重要的。为此在现行规范中,采用了一些位移或位移速率的控制标准。但实践表明,采用现行的标准仍然出现一些地基失稳的事例,说明这些标准需要进一步求证和改进。除了继续收集、分析失效事例之外,通过离心模型试验也可以进一步理解堤基失稳的机制。离心模型试验结果表明：路堤快速填筑使得地基破坏时,地基变形略呈马鞍形,坡肩处沉降比道中处沉降略大,坡脚水平位移增加较快;破坏时的位移速率与现有规范建议的控制标准基本符合,但地基内的孔隙水压力是在地基进入破坏状态并发生较大变形之后才有突然增加的趋势;此外,坡脚水平位移和道中沉降的速率比,可能是一个较好的稳定性控制的指标。 相似文献
6.
A large strain analysis of undrained expansion of a spherical/cylindrical cavity in a soil modelled as non‐linear elastic modified Cam clay material is presented. The stress–strain response of the soil is assumed to obey non‐linear elasticity until yielding. A power‐law characteristic or a hyperbolic stress–strain curve is used to describe the gradual reduction of soil stiffness with shear strain. It is assumed that, after yielding, the elasto‐plastic behaviour of the soil can be described by the modified Cam clay model. Based on a closed‐form stress–strain response in undrained condition, a numerical solution is obtained with the aid of simple numerical integration technique. The results show that the stresses and the pore pressure in the soil around an expanded cavity are significantly affected by the non‐linear elasticity, especially if the soil is overconsolidated. The difference between large strain and small strain solutions in the elastic zone is not significant. The stresses and the pore pressure at the cavity wall can be expressed as an approximate closed‐form solution. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
7.
A pragmatic strain-softening constitutive model, which is based on Modified Cam Clay, was applied to the simulation of the progressive failure of an embankment constructed on a deposit of sensitive (strain-softening) clay in Saga, Japan. A comparison of the predictions for this case indicates that if softening is ignored, only relatively small deflections and consolidation settlements are predicted, especially after construction. In contrast, for the case where softening is included in the analysis, progressive failure within the clay induces large shear deformations and finally failure of the embankment is predicted. This comparison suggests that softening-induced progressive failure should be considered in the design of embankments on such soils, and the residual strength of the deposit may have an important influence on the overall factor of safety of the construction. Detailed analyses of predicted excess pore water pressures, shear strains and shear stress levels in the ground indicate that considering the strain-softening process: (a) is associated with the buildup of excess pore water pressure; (b) promotes strain localization; and (c) results generally in a larger zone of soil involved in the failure. 相似文献
8.
Pascal Bertran Marianne Font Arnaud Giret Kevin Manchuel Deborah Sicilia 《Sedimentology》2019,66(3):1102-1117
Identifying the driving mechanisms of soft‐sediment deformation in the geological record is the subject of debate. Thawing of ice‐rich clayey silt above permafrost was proved experimentally to be among the processes capable of triggering deformation. However, previous work has failed so far to reproduce similar structures in sand. This study investigates fluidization and intrusive ice formation from soil models in the laboratory. Experimental conditions reproduce the growth of ice‐cored mounds caused by pore water pressure increase during freeze‐back of sand in a permafrost context. Excess pore water pressure causes hydraulic fracturing and the development of water lenses beneath the freezing front. Later freezing of the water lenses generates intrusive ice. The main structures consist of sand dykes and sills formed when the increase in pore water pressure exceeds a critical threshold, and soft‐sediment deformations induced by subsidence during ice melt. The combination of processes has resulted in diapir‐like structures. The experimental structures are similar to those described in Pleistocene sites from France. These processes constitute a credible alternative to the seismic hypothesis evoked to explain soft‐sediment deformation structures in other European regions subjected to Pleistocene cold climates. 相似文献
9.
典型基坑开挖卸荷路径下软土三轴流变特性研究 总被引：1，自引：0，他引：1
模拟基坑开挖下的卸荷路径,进行了不同卸荷条件下包括围压、卸荷路径和排水的卸荷流变试验。试验结果表明：软土在竖向卸荷试验中的回弹变形可分为瞬时回弹变形和滞后回弹变形;在应力控制式三轴试验中,围压和轴压同时卸荷时的初始变形速率较大;仅卸轴压时回弹滞后效应明显,而围压、轴压同时卸荷时由于土体产生剪切变形引起负孔压,使土体回弹滞后效应不明显;在相同卸荷路径下,排水剪切时由于土体吸水膨胀使得流变特性更明显些,且产生的负孔压最终会消散。根据试验成果,建立Merchant流变模型参数与卸荷条件的线性函数关系,并将函数关系代入Merchant模型,最终得到能考虑围压及卸荷路径影响的软土卸荷流变经验模型。研究结果为软土流变变形模型研究及卸荷后基坑变形研究提供了参考。 相似文献
10.
冲击荷载作用下饱和软粘土孔压增长与消散规律 总被引：17，自引：3，他引：14
通过大量室内试验,研究饱和软粘土在冲击荷载作用下的变形和孔压增长规律,讨论孔压增长的内在机理和不同围压、不同冲击能作用下孔压量的变化。讨论土体的再团结变形规律,提出再固结体积压缩系数的确定方法。最后分析冲击荷载作用后的强度变化。这些讨论为动静结合法处理软基提供了依据。 相似文献
11.
This paper presents a numerical model for the elasto‐plastic electro‐osmosis consolidation of unsaturated clays experiencing large strains, by considering electro‐osmosis and hydro‐mechanical flows in a deformable multiphase porous medium. The coupled governing equations involving the pore water flow, pore gas flow, electric flow and mechanical deformation in unsaturated clays are derived within the framework of averaging theory and solved numerically using finite elements. The displacements of the solid phase, the pressure of the water phase, the pressure of the gas phase and the electric potential are taken as the primary unknowns in the proposed model. The nonlinear variation of transport parameters during electro‐osmosis consolidation are incorporated into the model using empirical expressions that strongly depend on the degree of water saturation, whereas the Barcelona Basic Model is employed to simulate the elasto‐plastic mechanical behaviour of unsaturated clays. The accuracy of the proposed model is evaluated by validating it against two well‐known numerical examples, involving electro‐osmosis and unsaturated soil behaviour respectively. Two further examples are then investigated to study the capability of the computational algorithm in modelling multiphase flow in electro‐osmosis consolidation. Finally, the effects of gas generation at the anode, the deformation characteristics, the degree of saturation and the time dependent evolution of the excess pore pressure are discussed. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
12.
强夯-降水联合加固饱和软粘土地基试验研究 总被引：33，自引：3，他引：30
针对强夯法加固饱和软粘土地基时超静孔压消散难和易出现“橡皮土”的问题,提出将强夯和井点降水技术结合起来,利用井点降水技术来加速夯后超静孔压的消散和软土固结,并结合上海市某集装箱堆场工程中土部为吹填细砂、下部为饱和软粘土的地基进行了现场试验研究,对加固过程以及加固后的土体变形、超静孔压变化、工艺参数、加固效果和加固后土体的时间效应以及强夯的加固机理等进行了分析和讨论。强夯和井点降水技术的合理结合进一步拓宽了井点降水和强夯法的应用范围,为我国沿海地区广为分布的软土地基的加固问题提供了新的途径。 相似文献
13.
如何保持新旧路基间的变形协调是拓宽工程中普遍关注的问题,目前尚缺乏对于拓宽方式对软土路基工程特性影响的直接对比分析。本文开展离心模型试验,采用普通填料或气泡轻质土进行放坡或挡墙拓宽,分析了新旧路基变形、地基土中孔压和土压力在路基拓宽后的变化规律。试验结果表明,气泡轻质土显著减小拓宽过程中产生的孔隙水压力增量和附加应力增量。相较于边坡拓宽,挡墙拓宽方式对地基影响更小。轻质土路堤采用挡墙拓宽方式引起的挡墙倾角和墙背土压力均较小。采用Boussinesq公式计算得到的拓宽路堤引起的地基中附加应力分布与实测值基本吻合,且偏于保守。本文的研究成果对指导路基拓宽工程具有借鉴意义。 相似文献
14.
土工织物加固软土路堤的有限元分析 总被引：5，自引：4，他引：5
采用有限元方法对土工织物加固软弱地基路堤的力学机理进行了研究.通过比较路基加筋和未加筋两种情况研究了土工织物的加固机理,结果表明土工织物对于提高路堤填筑高度、减少路堤侧向位移、均化路堤沉降以及加速超孔隙水压力消散有显著的效果.加筋路堤中土工织物的轴力受填筑高度、超孔压消散速度和接触面系数等因素的影响,路堤填筑高度和施工进度的控制有利于土工织物抗拉强度的发挥.对路堤安全系数的研究分析表明传统的极限平衡法验算路堤稳定性偏于保守,采用有限元方法能较好地反映土工织物的加筋作用,可以优化工程设计. 相似文献
15.
The influence of a diaphragm wall construction on the stress field in a soft clayey soil is investigated by the use of a three‐dimensional FE‐model of seven adjacent wall panels. The installation procedure comprises the excavation and the subsequent pouring of each panel taking into account the increasing stiffness of the placed fresh concrete. The soft clay deposit is described by a visco‐hypoplastic constitutive model considering the rheological properties and the small‐strain stiffness of the soil. The construction process considerably affects the effective earth and pore water pressures adjacent to the wall. Due to concreting, a high excess pore water pressure arises, which dissipates during the following construction steps. The earth pressure finally shows an oscillating, distinct three‐dimensional distribution along the retaining wall which depends on the installation sequence of the panels and the difference between the fresh concrete pressure and the total horizontal earth pressure at rest. In comparison to FE‐calculations adopting the earth pressure at rest as initial condition, greater wall deflections and surface ground settlements during the subsequent pit excavation can be expected, as the average stress level especially in the upper half of the wall is increased by the construction procedure of the retaining structure. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
16.
Artificial ground freezing (AGF) is a commonly used technique in geotechnical engineering for ground improvement such as ground water control and temporary excavation support during tunnel construction in soft soils. The main potential problem connected with this technique is that it may produce heave and settlement at the ground surface, which may cause damage to the surface infrastructure. Additionally, the freezing process and the energy needed to obtain a stable frozen ground may be significantly influenced by seepage flow. Evidently, safe design and execution of AGF require a reliable prediction of the coupled thermo‐hydro‐mechanical behavior of freezing soils. With the theory of poromechanics, a three‐phase finite element soil model is proposed, considering solid particles, liquid water, and crystal ice as separate phases and mixture temperature, liquid pressure, and solid displacement as the primary field variables. In addition to the volume expansion of water transforming into ice, the contribution of the micro‐cryo‐suction mechanism to the frost heave phenomenon is described in the model using the theory of premelting dynamics. Through fundamental physical laws and corresponding state relations, the model captures various couplings among the phase transition, the liquid transport within the pore space, and the accompanying mechanical deformation. The verification and validation of the model are accomplished by means of selected analyses. An application example is related to AGF during tunnel excavation, investigating the influence of seepage flow on the freezing process and the time required to establish a closed supporting frozen arch. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
17.
软土地基上路堤填筑的破坏性状分析 总被引：5，自引：0，他引：5
在软土地区建设高速公路、铁路等的填筑路堤越来越多,由于软土的不排水抗剪强度较低,软土地区路堤的填筑十分困难,而软土地基的渗透性很低,通常认为路堤的填筑是在不排水条件下进行。经典的设计方法是基于极限平衡法,无法考虑变形等因素,因此,能综合考虑稳定及变形等因素的有限元方法成为分析此类问题的一种有效手段。依据连云港铁路路堤在软土地基上的填筑试验资料,采用大变形有限元方法及Mohr-Coulomb模型,采用现场试验得到的土体强度值,对平面应变条件下路堤填筑的破坏性状及极限填筑高度等进行了分析,并对比了有限元分析结果及现场试验结果,结果表明,采用大变形有限元方法能够较准确的得到填筑路堤的极限高度,并有效地分析填筑路堤的破坏性状。 相似文献
18.
The coefficient of consolidation is one of the most important parameters that control the rate of consolidation. Conventional consolidation theories assume that the coefficient of consolidation is constant during the whole consolidation process. In the case of sensitive clay, the coefficient of consolidation is strongly dependent on the level of effective stress of clay. With the dissipation of pore water pressure and the increase of effective stress, the soil structure of the upper subsoil is gradually destroyed downwards and its coefficient of consolidation becomes smaller. At the same time, the coefficient of permeability of the vertical drains drops down because of the kinking or bending effect. The destructured upper subsoil and the kinking of the vertical drain hinder the dissipation of the pore pressure in the lower subsoil. This paper presents a model to describe the above important phenomena during the consolidation of sensitive clay with vertical drain. The solution for proposed model can be obtained by extending the closed‐form solution of the consolidation of double‐layered ground with vertical drain by the interactive method introducing the concept of the moving boundary and the reduction of discharge capacity of vertical drain. The numerical results obtained from the finite element method package PLAXIS (Ver. 7.2) are adopted to compare those obtained from the present algorithm. Moreover, the rationality of the moving boundary is explained by the distributions of the excess pore water pressure in natural soil zone along the radial direction. Wenzhou airport project is taken as a case study in this paper. The results for the sensitive soil with decaying sand drain agree very well with the in situ measured data. The calculated results can properly explain two general phenomena observed in the consolidation of soft sensitive soil ground with vertical drains: one is that the time to achieve the same consolidation degree is much longer under heavy loading than that under light loading; the other is that the consolidation speed is much slower in the lower subsoil than in the upper subsoil. Finally, it is indicated that the vertical drains can decrease the hindrance effect of the destructured subsoil. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
19.
基于离心机振动台,分别针对典型软基尾黏土尾矿库及加高扩容后的尾矿库开展了动力离心模型试验,重点探究了加速度分布规律、软土及尾矿内部孔压变化规律以及“软基?库内尾矿?尾矿坝”系统的变形规律等内容。试验结果表明：软基对地震动的放大效应较为微弱,而坝体加速度沿高程逐渐放大,高层子坝加速度响应最为强烈,加高扩容后的现坝顶加速度响应可达原坝顶的2.2倍;地震作用下软土与库内尾矿内部均会产生一定的孔压增量,但未达到液化状态。地震动强度、软基及库内尾矿的固结状态对尾矿库的变形模式影响较大。当固结不充分时,在强震作用下易发生尾矿的水平滑移,进而造成坝顶及下游软土隆起。在固结较为充分且地震动强度较弱的情况下,变形模式以震陷为主。该试验成果将为此类尾矿库的动力稳定分析及抗震加固设计提供一定参考。 相似文献
20.
软黏土中地下结构浮力测试试验与分析 总被引：2，自引：0，他引：2
浮力计算是地下结构抗浮设计的关键,而弱透水黏性土中浮力大小的确定一直存在争议。对此,设计一套免受摩擦力影响的模型试验装置,对埋置于软黏土中的地下结构模型进行浮力测试。试验采用卸重上浮的思路,力学模型简单明确,浮力即等于浮起瞬间的剩余配重,并通过水压和位移的实时监测来判定结构上浮的临界状态。试验结果表明,软黏土中的水压是一个动态变化量,受渗流、温度、卸重回弹以及土-水相互作用的影响,且往往小于理论水压;实测浮力是理论浮力的0.93倍,存在少量折减;水压和位移时程曲线显示上浮过程是持续动态变化的,最终浮起时具有突发性。 相似文献