共查询到20条相似文献，搜索用时 109 毫秒
1.
The main objective of this work is to develop a novel moving‐mesh finite‐volume method capable of solving the seepage problem in domains with arbitrary geometries. One major difficulty in analysing the seepage problem is the position of phreatic boundary which is unknown at the beginning of solution. In the current algorithm, we first choose an arbitrary solution domain with a hypothetical phreatic boundary and distribute the finite volumes therein. Then, we derive the conservative statement on a curvilinear co‐ordinate system for each cell and implement the known boundary conditions all over the solution domain. Defining a consistency factor, the inconsistency between the hypothesis boundary and the known boundary conditions is measured at the phreatic boundary. Subsequently, the preceding mesh is suitably deformed so that its upper boundary matches the new location of the phreatic surface. This tactic results in a moving‐mesh procedure which is continued until the nonlinear boundary conditions are fully satisfied at the phreatic boundary. To validate the developed algorithm, a number of seepage models, which have been previously targeted by the other investigators, are solved. Comparisons between the current results and those of other numerical methods as well as the experimental data show that the current moving‐grid finite‐volume method is highly robust and it provides sufficient accuracy and reliability. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
2.
When tunneling is carried out beneath the groundwater table, hydraulic boundary is altered, resulting in seepage entering into the tunnel. The development of flow into the tunnel induces seepage stresses in the ground and the lining is subjected to additional loads. This can often cause fine particles to move, which clog the filter resulting in the long‐term hydraulic deterioration of the drainage system. However, the effect of seepage force is generally not considered in the analysis of tunnel. While several elastic solutions have been proposed by assuming seepage in an elastic medium, stress solutions have not been considered for the seepage force in a porous elasto‐plastic medium. This paper documents a study that investigates the stress behavior, caused by seepage, of a tunnel in an elasto‐plastic ground and its effects on the tunnel and ground. New elasto‐plastic solutions that adopt the Mohr–Coulomb failure criterion are proposed for a circular tunnel under radial flow conditions. A simple solution based on the hydraulic gradient obtained from a numerical parametric study is also proposed for practical use. It should be noted that the simple equation is useful for acquiring additional insight into a problem on a tunnel under drainage, because only a minimal computational effort is needed and considerable economic benefits can be gained by using it in the preliminary stage of tunnel design. The proposed equations were partly validated by numerical analysis, and their applicability is illustrated and discussed using an example problem. Comments on the tunnel analysis are also provided. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
3.
An analytical solution is proposed for transient flow and deformation coupling of a fluid‐saturated poroelastic medium within a finite two‐dimensional (2‐D) rectangular domain. In this study, the porous medium is assumed to be isotropic, homogeneous, and compressible. In addition, the point sink can be located at an arbitrary position in the porous medium. The fluid–solid interaction in porous media is governed by the general Biot's consolidation theory. The method of integral transforms is applied in the analytical formulation of closed‐form solutions. The proposed analytical solution is then verified against both exact and numerical results. The analytical solution is first simplified and validated by comparison with an existing exact solution for the uncoupled problem. Then, a case study for pumping from a confined aquifer is performed. The consistency between the numerical solution and the analytical solution confirms the accuracy and reliability of the analytical solution presented in this paper. The proposed analytical solution can help us to obtain in‐depth insights into time‐dependent mechanical behavior due to fluid withdrawal within finite 2‐D porous media. Moreover, it can also be of great significance to calibrate numerical solutions in plane strain poroelasticity and to formulate relevant industry norms and standards. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
4.
This paper analyses the problem of a hydraulically driven fracture, propagating in an impermeable, linear elastic medium. The fracture is driven by injection of an incompressible, viscous fluid with power‐law rheology and behaviour index n?0. The opening of the fracture and the internal fluid pressure are related through the elastic singular integral equation, and the flow of fluid inside the crack is modelled using the lubrication theory. Under the additional assumptions of negligible toughness and no lag between the fluid front and the crack tip, the problem is reduced to self‐similar form. A solution that describes the crack length evolution, the fracture opening, the net fluid pressure and the fluid flow rate inside the crack is presented. This self‐similar solution is obtained by expanding the fracture opening in a series of Gegenbauer polynomials, with the series coefficients calculated using a numerical minimization procedure. The influence of the fluid index n in the crack propagation is also analysed. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
5.
An approximate analytical solution is presented for the coupled seepage and deformation problem of unsaturated soils. Because of the matric suction dependence of both saturation and permeability coefficient, the coupled governing equations are strongly nonlinear. To obtain an analytical solution, these coupled governing equations are linearized and analytically solved for a specified saturation using the eigenfunction method. Then, the obtained analytical solutions are extended to the entire saturation range. Comparison between the current solution and the previous theoretical solution indicates that the proposed solution yields excellent results. Due to its analytical nature, the proposed procedure can be effectively used to obtain the solution of the coupled seepage and deformation of unsaturated soils. 相似文献
6.
A high‐frequency open boundary for transient seepage analyses of semi‐infinite layers by extending the scaled boundary finite element method 
下载免费PDF全文
下载免费PDF全文 Suriyon Prempramote 《国际地质力学数值与分析法杂志》2016,40(6):919-941
A high‐frequency open boundary has been developed for the transient seepage analyses of semi‐infinite layers with a constant depth. The scaled boundary finite element equation of pore water pressure is formulated first in the frequency domain. With the eigenvalue problem, the equation can be decoupled into modal equations whose modal dynamic permeability equation can be determined. The continued fraction technique is adopted to formulate the continued fraction solution in the frequency domain. All constants in the solution are determined recursively at the high‐frequency limit. By introducing auxiliary variables and the continued fraction solution to the relationship between the prescribed seepage flow and the pore water pressure in the frequency domain, the open boundary condition is obtained. After transformed to the time domain, the open boundary condition is expressed as a system of fractional differential equations. No convolution integral is required. The accuracy of the analysis results increases with the increasing orders of continued fraction. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
7.
Numerical performance of some finite element schemes for analysis of seepage in porous elastic media
Several finite element schemes for analysis of seepage in porous elastic media, based on different spatial and temporal discretization, were implemented in computer programs. Their numerical performance is evaluated by comparison with the exact solution for Terzaghi's problem of one-dimensional consolidation. 相似文献
8.
Steady‐state analytical solutions of flow and deformation coupling due to a point sink within a finite fluid‐saturated poroelastic layer 下载免费PDF全文
下载免费PDF全文 An exact steady‐state closed‐form solution is presented for coupled flow and deformation of an axisymmetric isotropic homogeneous fluid‐saturated poroelastic layer with a finite radius due to a point sink. The hydromechanical behavior of the poroelastic layer is governed by Biot's consolidation theory. Boundary conditions on the lateral surface are specifically chosen to match the appropriate finite Hankel transforms and simplify the transforms of the governing equations. Ordinary differential equations in the transformed domain are solved, and then the analytical solutions in the physical space for the pore pressure and the displacements are finally obtained by using finite Hankel inversions. The analytical solutions at some special locations such as the top and bottom surfaces, lateral surface, and the symmetrical axis are given and analyzed. And a case study for the consolidation of a water‐saturated soft clay layer due to pumping is conducted. The analytical solution is verified against the finite element solution. Meanwhile, an analysis of coupled hydromechanical behavior is carried out herein. The presented analytical solution is an exact solution to the practical poroelastic problem within an axisymmetric finite layer. It can provide us a better understanding of the poroelastic behavior of the finite layer due to fluid extraction. Besides, it can be applied to calibrate numerical schemes of axisymmetric poroelasticity within finite domains. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
9.
Nathalie Boukpeti 《国际地质力学数值与分析法杂志》2008,32(13):1661-1691
A solution to the problem of freezing of a poroelastic material is derived and analysed in the case of one‐dimensional deformation. The solution is sought within the framework of thermo‐poroelasticity, with specific account of the behaviour of freezing materials. The governing equations of the problem can be combined into a pair of coupled partial differential equations for the temperature and the fluid pressure, with particular forms in the freezing and the unfrozen regions. In the freezing region, the equations are highly non‐linear, partly due to the dependence of thermal and hydraulic properties on water saturation, which varies with temperature. Consequently, the solution is obtained through numerical methods, with special attention to the propagation of the freezing front boundary. The response to one‐dimensional freezing is illustrated for the case of cement paste. Finally, the influence on the solution of varying selected parameters is analysed, such as the temperature boundary conditions, the parameters characterizing the geometry of the porous system, the ratio of fluid and thermal diffusivities, and the rate of cooling applied at the freezing end. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
10.
This paper presents an exact analytical solution to fully coupled axisymmetric consolidation of a semi‐infinite, transversely isotropic saturated soil subjected to a uniform circular loading at the ground surface. The analysis is under the framework of Biot's general theory of consolidation. First, the governing equations of consolidation are transformed into a set of equivalent partial differential equations with the introduction of two auxiliary variables. These partial differential equations are then solved using Hankel–Laplace integral transforms. Once solutions in the transformed domain have been obtained, the actual solutions in the physical domain for displacements and stress components of the solid matrix, pore‐water pressure and fluid discharge can be finally obtained by direct numerical inversion. The accuracy of the numerical solutions developed is confirmed by comparison with an existing exact solution for an isotropic and saturated soil that is a special case of the more general problem addressed. Numerical analyses are also presented to investigate the influence of the degree of material anisotropy on the consolidation settlement. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
11.
A major challenge in seepage analysis is to locate the phreatic surface in an unconfined aquifer. The phreatic surface is unknown and assumed as a discontinuity separating the seepage domain into dry and wet parts, thus should be determined iteratively with special schemes. In this study, we systematically developed a new numerical manifold method (NMM) model for unconfined seepage analysis. The NMM is a general numerical method for modeling continuous and discontinuous deformation in a unified mathematical form. The novelty of our NMM model is rooted in the NMM two‐cover‐mesh system: the mathematical covers are fixed and the physical covers are adjusted with iterations to account for the discontinuity feature of the phreatic surface. We developed an energy‐work seepage model, which accommodates flexible approaches for boundary conditions and provides a form consistent with that in mechanical analysis with clarified physical meaning of the potential energy. In the framework of this energy‐work seepage model, we proposed a physical concept model (a pipe model) for constructing the penalty function used in the penalty method to uniformly deal with Dirichlet, Neumann, and material boundaries. The new NMM model was applied to study four example problems of unconfined seepage with varying geometric shape, boundary conditions, and material domains. The comparison of our simulation results to those of existing numerical models for these examples indicates that our NMM model can achieve a high accuracy and faster convergence speed with relatively coarse meshes. This NMM seepage model will be a key component of our future coupled hydro‐mechanical NMM model. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
12.
Abbas Z. Ijam 《国际地质力学数值与分析法杂志》1994,18(5):345-353
Conformal mapping techniques are used to obtain an exact solution for seepage flow below a hydraulic structure founded on permeable soil of infinite depth for a flat floor with an inclined cut-off at the downstream end. Results are presented for different values of b/s and θ. The exit gradient decreases considerably along a distance beyond the floor end with an increase in cut-off inclination. The maximum exit gradient decreases for θ = 10, 20 and 30° and starts increasing for θ = 45°. The uplift pressure decreases as θ increases. It is concluded that using an inclined cut-off increases the factor of safety in design against uplift and piping. 相似文献
13.
在使用有限元方法求解非饱和土渗流问题时,土-水特征曲线和渗透率函数的强烈非线性经常会造成计算中出现迭代不收敛、计算误差大等问题。基于变量变换的思想,结合时间步长自适应技术提出了一种求解非饱和渗流问题的新方法--欠松弛RFT变换方法（ATUR1）。ATUR1方法通过变量变换,大大降低了Richards方程中未知数在空间和时间上的非线性程度,从而改善这种非线性所带来的计算收敛困难和精度差等问题。欠松弛技术的引入减少了迭代过程中的振荡现象,进一步提高了非线性迭代计算的效率。时间步长自适应技术则有效地控制整个计算过程的误差。数值算例结果说明,ATUR1可以有效地提高计算效率和精度,是一种准确有效的计算方法。 相似文献
14.
Large strain similarity solution for a spherical or circular opening excavated in elastic‐perfectly plastic media 下载免费PDF全文
下载免费PDF全文 K.H. Park 《国际地质力学数值与分析法杂志》2015,39(7):724-737
This paper deals with the unloading problem of a spherical or circular opening excavated in elastic‐perfectly plastic media with a nonassociated Mohr–Coulomb yield criterion. A large strain similarity solution, using incremental velocity approach, is presented by replacing partial differential equations from stress equilibrium, constitutive law, consistency condition, and displacement equation with first‐order ordinary differential equations. The classical Runge–Kutta method is used to solve the first‐order ordinary differential equations. Comparisons among small and large strain solutions are made using some data sets of soil and rock. The results show that the displacements by large strain similarity solution are smaller than those by exact small strain solution and somewhat larger than those by large strain solution using total strain approach. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
15.
Chongbin Zhao B. E. Hobbs P. Hornby A. Ord Shenglin Peng Liangming Liu 《国际地质力学数值与分析法杂志》2008,32(9):1107-1130
The chemical‐dissolution front propagation problem exists ubiquitously in many scientific and engineering fields. To solve this problem, it is necessary to deal with a coupled system between porosity, pore‐fluid pressure and reactive chemical‐species transport in fluid‐saturated porous media. Because there was confusion between the average linear velocity and the Darcy velocity in the previous study, the governing equations and related solutions of the problem are re‐derived to correct this confusion in this paper. Owing to the morphological instability of a chemical‐dissolution front, a numerical procedure, which is a combination of the finite element and finite difference methods, is also proposed to solve this problem. In order to verify the proposed numerical procedure, a set of analytical solutions has been derived for a benchmark problem under a special condition where the ratio of the equilibrium concentration to the solid molar density of the concerned chemical species is very small. Not only can the derived analytical solutions be used to verify any numerical method before it is used to solve this kind of chemical‐dissolution front propagation problem but they can also be used to understand the fundamental mechanisms behind the morphological instability of a chemical‐dissolution front during its propagation within fluid‐saturated porous media. The related numerical examples have demonstrated the usefulness and applicability of the proposed numerical procedure for dealing with the chemical‐dissolution front instability problem within a fluid‐saturated porous medium. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
16.
W. G. Pariseau 《国际地质力学数值与分析法杂志》1999,23(7):577-594
Consolidation of a poroelastic material that yields according to Drucker–Prager or Mohr–Coulomb criteria leads to a Stefan problem for time-dependent pore fluid pressure. The solution to the Stefan problem for a column of infinite depth is known and is adapted to poroelastic/plastic consolidation of a weightless material under a uniform surface load applied instantaneously and subsequently maintained constant. In this approach, the plastic potential and yield criterion need not be the same. If yielding occurs concurrently with application of load, then collapse is instantaneous. Otherwise, yielding may occur during the consolidation period. If so, then the elastic–plastic zone first appears at the surface and subsequently moves down the column. Depth to the elastic–plastic boundary is given by the simple expression Z = 2β√t where β is a constant determined from continuity conditions at the elastic–plastic boundary. Time-dependent surface displacement that occurs during consolidation is directly proportional to Z. There is little difference between elastic–plastic and purely elastic results in a numerical example because there is little difference in the respective consolidation coefficients. Elastic–plastic finite element results obtained from a column of finite depth are in close agreement with analytical results as long as the pore pressure at the bottom of the column does not change significantly from the value induced by application of the surface load. The analytical solution provides for: (1) efficient evaluation of material properties effects on consolidation, including strength and fluid compressibility, and (2) an accurate way of validating poroelastic/plastic computer codes that are based on Drucker–Prager and Mohr–Coulomb criteria. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
17.
Why asymptotic limit of the acid dissolution capacity can lead to a sharp dissolution front in chemical dissolution of porous rocks? 下载免费PDF全文
下载免费PDF全文 The use of the asymptotic limit can greatly simplify the theoretical analysis of chemical dissolution front instabilities in fluid‐saturated rocks and therefore make it possible to obtain mathematical solutions, which often play a crucial role in understanding the propagation behavior of chemical dissolution fronts in chemical dissolution systems. However, there has been a debate in recent years that the asymptotic limit of the acid dissolution capacity (i.e., the acid dissolution capacity number approaching zero) alone cannot lead to a sharp dissolution front of the Stefan type in the acidization dissolution system, in which the dissolvable minerals of carbonate rocks are chemically dissolved by the injected acid flow. The acid dissolution capacity number is commonly defined as the ratio of the volume of the carbonate rock dissolved by an acid to that of the acid. In this paper, we use four different proof methods, including (i) direct use of the fundamental concepts; (ii) use of the mathematical governing equations of an acidization dissolution system; (iii) use of the different time scaling approach; and (iv) use of a moving coordinate system approach, to demonstrate that the asymptotic limit of the acid dissolution capacity can indeed lead to sharp dissolution fronts of the Stefan type in acidization dissolution systems on a much larger time scale (than the dissolution time scale). Our new finding is that on the reaction time scale, the condition of the conventional time derivative of porosity approaching zero alone can ensure that the acidization dissolution front has a sharp shape of the Stefan type. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
18.
Govinda C. Mishra Amitava Saha Mitthan L. Kansal Ravi P. Gupta 《Hydrogeology Journal》2011,19(3):573-589
A semi-analytical solution has been derived for predicting the time of emptying a pond due to seepage. The time for the seeping water to reach the water table since the pond was initially filled has been calculated applying the Green-Ampt infiltration theory. The recharge rate after the wetting front joins the water table has been computed using a non-linear relationship between seepage head and recharge rate proposed by earlier investigators. The maximum rise in the water table beneath the center of the pond consequent to the time-varying recharge is calculated applying kernel coefficients obtained from solution of the linearized Boussinesq equation. It was observed that a pond with 50-m initial diameter at the water surface and 3-m maximum depth of water is dry after 168 days, where the subsoil is sandy clay. If the subsoil happens to be clay, the depth of water in the pond at the end of 9 months, i.e., after completion of the non-monsoon period, is 0.62 m. The maximum mound heights beneath the pond for constant recharge rate and uniform recharging area calculated from the present solution compare well with existing numerical as well as analytical solutions. 相似文献
19.
In this study, a simplified analytical closed‐form solution, considering plane strain and axial symmetry conditions, for analysis of a circular pressure tunnel excavated underwater table, is developed. The method accounts for the seepage forces with the steady‐state flow and is based on the generalized effective stress law. To examine the effect of pore pressure variations and also the boundary conditions at the ground surface, the formulations are derived for different directions around the tunnel. The proposed method can be applied for analysis and design of pressure tunnels. Illustrative examples are given to demonstrate the performance of the proposed solution and also to examine the effect of seepage forces on the stability of tunnels. The simplified analytical solution derived in this study is compared with numerical analyses. It is concluded that the classic solutions (Lame's thick‐walled solution), considering the internal pressure as a mechanical load applied to the tunnel surface, are not applicable to pervious media and can result in an unsafe design. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
20.
半无限含水层中带衬砌隧洞渗流解析研究 总被引：3，自引：0，他引：3
现有关于半无限含水层中隧洞渗流的解析解不能考虑衬砌部分排水的特性。假定土体和衬砌均为饱和均匀连续介质,采用土体与衬砌分算;利用复变函数解决孔口问题基本方法,对土体采用共形映射坐标变换,将土体中的渗流方程转换为与衬砌部分类似的二维Laplace方程圆环域的Dirichlet问题;通过Fourier解法,根据边界条件并利用流量连续条件,求得半无限空间中带衬砌隧洞渗流量和衬砌周边水头解析解答。分析了径深比、土体与衬砌渗透系数相对值、内壁水压力等因素对渗流量和衬砌周边水头的影响,并与数值算例进行了比较。结果表明,对浅埋隧洞该解析解仍具有较好的精度,是简便、实用的计算方法。 相似文献