首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 365 毫秒
1.
The main aim of this study was to produce landslide susceptibility maps using statistical index (SI), certainty factors (CF), weights of evidence (WoE) and evidential belief function (EBF) models for the Long County, China. Firstly, a landslide inventory map, including a total of 171 landslides, was compiled on the basis of earlier reports, interpretation of aerial photographs and supported by extensive field surveys. Thereafter, all landslides were randomly separated into two data sets: 70% landslides (120 points) were selected for establishing the model and the remaining landslides (51 points) were used for validation purposes. Eleven landslide conditioning factors, such as slope aspect, slope angle, plan curvature, profile curvature, altitude, distance to faults, distance to roads, distance to rivers, lithology, NDVI and land use, were considered for landslide susceptibility mapping in this study. Then, the SI, CF, WoE and EBF models were used to produce the landslide susceptibility maps for the study area. Finally, the four models were validated using area under the curve (AUC) method. According to the validation results, the EBF model (AUC = 78.93%) has a higher prediction accuracy than the SI model (AUC = 77.72%), the WoE model (AUC = 77.62%) and the CF model (AUC = 77.72%). Similarly, the validation results also indicate that the EBF model has the highest training accuracy of 80.25%, followed by SI (79.80%), WoE (79.71%) and CF (79.67%) models.  相似文献   

2.
The landslide hazard occurred in Taibai County has the characteristics of the typical landslides in mountain hinterland. The slopes mainly consist of residual sediments and locate along the highway. Most of them are in the less stable state and in high risk during rainfall in flood season especially. The main purpose of this paper is to produce landslide susceptibility maps for Taibai County (China). In the first stage, a landslide inventory map and the input layers of the landslide conditioning factors were prepared in the geographic information system supported by field investigations and remote sensing data. The landslides conditioning factors considered for the study area were slope angle, altitude, slope aspect, plan curvature, profile curvature, distance to faults, distance to rivers, distance to roads, normalized difference vegetation index, lithological unit, rainfall and land use. Subsequently, the thematic data layers of conditioning factors were integrated by frequency ratio (FR), weights of evidence (WOE) and evidential belief function (EBF) models. As a result, landslide susceptibility maps were obtained. In order to compare the predictive ability of these three models, a validation procedure was conducted. The curves of cumulative area percentage of ordered index values vs. the cumulative percentage of landslide numbers were plotted and the values of area under the curve (AUC) were calculated. The predictive ability was characterized by the AUC values and it indicates that all these models considered have relatively similar and high accuracies. The success rate of FR, WOE and EBF models was 0.9161, 0.9132 and 0.9129, while the prediction rate of the three models was 0.9061, 0.9052 and 0.9007, respectively. Considering the accuracy and simplicity comprehensively, the FR model is the optimum method. These landslide susceptibility maps can be used for preliminary land use planning and hazard mitigation purpose.  相似文献   

3.
Abstract

In this study, we introduced novel hybrid of evidence believe function (EBF) with logistic regression (EBF-LR) and logistic model tree (EBF-LMT) for landslide susceptibility modelling. Fourteen conditioning factors were selected, including slope aspect, elevation, slope angle, profile curvature, plan curvature, topographic wetness index (TWI), stream sediment transport index (STI), stream power index (SPI), distance to rivers, distance to faults, distance to roads, lithology, normalized difference vegetation index (NDVI), and land use. The importance of factors was assessed using correlation attribute evaluation method. Finally, the performance of three models was evaluated using the area under the curve (AUC). The validation process indicated that the EBF-LMT model acquired the highest AUC for the training (84.7%) and validation (76.5%) datasets, followed by EBF-LR and EBF models. Our result also confirmed that combination of a decision tree-logistic regression-based algorithm with a bivariate statistical model lead to enhance the prediction power of individual landslide models.  相似文献   

4.
The main objective of the study was to evaluate and compare the overall performance of three methods, frequency ratio (FR), certainty factor (CF) and index of entropy (IOE), for rainfall-induced landslide susceptibility mapping at the Chongren area (China) using geographic information system and remote sensing. First, a landslide inventory map for the study area was constructed from field surveys and interpretations of aerial photographs. Second, 15 landslide-related factors such as elevation, slope, aspect, plan curvature, profile curvature, stream power index, sediment transport index, topographic wetness index, distance to faults, distance to rivers, distance to roads, landuse, NDVI, lithology and rainfall were prepared for the landslide susceptibility modelling. Using these data, three landslide susceptibility models were constructed using FR, CF and IOE. Finally, these models were validated and compared using known landslide locations and the receiver operating characteristics curve. The result shows that all the models perform well on both the training and validation data. The area under the curve showed that the goodness-of-fit with the training data is 79.12, 80.34 and 80.42% for FR, CF and IOE whereas the prediction power is 80.14, 81.58 and 81.73%, for FR, CF and IOE, respectively. The result of this study may be useful for local government management and land use planning.  相似文献   

5.
A GIS-based statistical methodology for landslide susceptibility zonation is described and its application to a study area in the Western Ghats of Kerala (India) is presented. The study area was approximately 218.44 km2 and 129 landslides were identified in this area. The environmental attributes used for the landslide susceptibility analysis include geomorphology, slope, aspect, slope length, plan curvature, profile curvature, elevation, drainage density, distance from drainages, lineament density, distance from lineaments and land use. The quantitative relationship between landslides and factors affecting landslides are established by the data driven-Information Value (InfoVal) — method. By applying and integrating the InfoVal weights using ArcGIS software, a continuous scale of numerical indices (susceptibility index) is obtained with which the study area is divided into five classes of landslide susceptibility. In order to validate the results of the susceptibility analysis, a success rate curve was prepared. The map obtained shows that a great majority of the landslides (74.42%) identified in the field were located in susceptible and highly susceptible zones (27.29%). The area ratio calculated by the area under curve (AUC) method shows a prediction accuracy of 80.45%. The area having a high scale of susceptibility lies on side slope plateaus and denudational hills with high slopes where drainage density is relatively low and terrain modification is relatively intense.  相似文献   

6.
Geospatial database creation for landslide susceptibility mapping is often an almost inhibitive activity. This has been the reason that for quite some time landslide susceptibility analysis was modelled on the basis of spatially related factors. This paper presents the use of frequency ratio, fuzzy logic and multivariate regression models for landslide susceptibility mapping on Cameron catchment area, Malaysia, using a Geographic Information System (GIS) and remote sensing data. Landslide locations were identified in the study area from the interpretation of aerial photographs, high resolution satellite images, inventory reports and field surveys. Topographical, geological data and satellite images were collected, processed, and constructed into a spatial database using GIS and image processing tools. There were nine factors considered for landslide susceptibility mapping and the frequency ratio coefficient for each factor was computed. The factors chosen that influence landslide occurrence were: topographic slope, topographic aspect, topographic curvature and distance from drainage, all from the topographic database; lithology and distance from lineament, taken from the geologic database; land cover from TM satellite image; the vegetation index value from Landsat satellite images; and precipitation distribution from meteorological data. Using these factors the fuzzy membership values were calculated. Then fuzzy operators were applied to the fuzzy membership values for landslide susceptibility mapping. Further, multivariate logistic regression model was applied for the landslide susceptibility. Finally, the results of the analyses were verified using the landslide location data and compared with the frequency ratio, fuzzy logic and multivariate logistic regression models. The validation results showed that the frequency ratio model (accuracy is 89%) is better in prediction than fuzzy logic (accuracy is 84%) and logistic regression (accuracy is 85%) models. Results show that, among the fuzzy operators, in the case with “gamma” operator (λ = 0.9) showed the best accuracy (84%) while the case with “or” operator showed the worst accuracy (69%).  相似文献   

7.
Landslides susceptibility maps were constructed in the Pyeong-Chang area, Korea, using the Random Forest and Boosted Tree models. Landslide locations were randomly selected in a 50/50 ratio for training and validation of the models. Seventeen landslide-related factors were extracted and constructed in a spatial database. The relationships between the observed landslide locations and these factors were identified by using the two models. The models were used to generate a landslide susceptibility map and the importance of the factors was calculated. Finally, the landslide susceptibility maps were validated. Finally, landslide susceptibility maps were generated. For the Random Forest model, the validation accuracy in regression and classification algorithms showed 79.34 and 79.18%, respectively, and for the Boosted Tree model, these were 84.87 and 85.98%, respectively. The two models showed satisfactory accuracies, and the Boosted Tree model showed better results than the Random Forest model.  相似文献   

8.
The objective of this study is to produce groundwater potential map (GPM) and its performance assessment using a data-driven evidential belief function (EBF) model. This study was carried out in the Koohrang Watershed, Chaharmahal-e-Bakhtiari Province, Iran. It’s conducted in three main stages such as data preparation, groundwater potential mapping using EBF and validation of constructed model using receiver operating characteristic (ROC) curve. At first, 864 groundwater data were collected from spring locations; out of that, 605 (70%) locations were selected for training/model building and the remaining 259 (30%) cases were used for the model validation. In the next step, 12 effective factors such as altitude, slope aspect, slope degree, slopelength (LS), topographic wetness index (TWI), plan curvature, land use, lithology, distance from rivers, drainage density, distance from faults and fault density were extracted from the spatial database. Subsequently, GPM was prepared using EBF model in ArcGIS environment. Finally, the ROC curve and area under the curves (AUC) were drawn for verification purposes. The validation of results showed that the AUC for EBF model is 81.72%. In general, this result can be helpful for planners and engineers in water resource management and land-use planning.  相似文献   

9.
The main aim of this study is to generate groundwater spring potential maps for the Ningtiaota area (China) using three statistical models namely statistical index (SI), index of entropy (IOE) and certainty factors (CF) models. Firstly, 66 spring locations were identified by field surveys, out of which, 46 (70%) spring locations were randomly selected for training the models and the rest 20 (30%) spring locations were used for validation. Secondly, 12 spring influencing factors, namely slope angle, slope aspect, altitude, profile curvature, plan curvature, sediment transport index, stream power index, topographic wetness index, distance to roads, distance to streams, lithology and normalized difference vegetation index (NDVI) were derived from the spatial database. Subsequently, using the mentioned factors and the three models, groundwater spring potential values were calculated and the results were plotted in ArcGIS 10.0. Finally, the area under the curve was used to validate groundwater spring potential maps. The results showed that the IOE model, with the highest success rate of 0.9126 and the highest prediction rate of 0.9051, showed the preferable performance in this study. The results of this study may be helpful for planners and engineers in groundwater resource management and other similar watersheds.  相似文献   

10.
This study evaluates and compares landslide susceptibility maps of the Baxie River basin, Gansu Province, China, using three models: evidential belief function (EBF), certainty factor (CF) and frequency ratio (FR). First, a landslide inventory map is constructed from satellite image interpretation and extensive field data. Second, the study area is partitioned into 17,142 slope units, and modelled using nine landslide influence parameters: elevation, slope angle, slope aspect, relief amplitude, cutting depth, gully density, lithology, normalized difference vegetation index and distance to roads. Finally, landslide susceptibility maps are presented based on EBF, CF and FR models and validated using area under curve (AUC) analysis. The success rates of the EBF, CF and FR models are 0.8038, 0.7924 and 0.8088, respectively, while the prediction rates of the three models are 0.8056, 0.7922 and 0.7989, respectively. The result of this study can be reliably used in land use management and planning.  相似文献   

11.
Flood is one of the most devastating natural disasters with socio-economic and environmental consequences. Thus, comprehensive flood management is essential to reduce the flood effects on human lives and livelihoods. The main goal of this study was to investigate the application of the frequency ratio (FR) and weights-of-evidence (WofE) models for flood susceptibility mapping in the Golestan Province, Iran. At first, a flood inventory map was prepared using Iranian Water Resources Department and extensive field surveys. In total, 144 flood locations were identified in the study area. Of these, 101 (70%) floods were randomly selected as training data and the remaining 43 (30%) cases were used for the validation purposes. In the next step, flood conditioning factors such as lithology, land-use, distance from rivers, soil texture, slope angle, slope aspect, plan curvature, topographic wetness index (TWI) and altitude were prepared from the spatial database. Subsequently, the receiver operating characteristic (ROC) curves were drawn for produced flood susceptibility maps and the area under the curves (AUCs) was computed. The final results indicated that the FR (AUC = 76.47%) and WofE (AUC = 74.74%) models have almost similar and reasonable results. Therefore, these flood susceptibility maps can be useful for researchers and planner in flood mitigation strategies.  相似文献   

12.
The rapid increase in human population has increased the groundwater resources demand for drinking, agricultural and industrial purposes. The main purpose of this study is to produce groundwater potential map (GPM) using weights-of-evidence (WOE) and evidential belief function (EBF) models based on geographic information system in the Azna Plain, Lorestan Province, Iran. A total number of 370 groundwater wells with discharge more than 10 m3s?1were considered and out of them, 256 (70%) were randomly selected for training purpose, while the remaining114 (30%) were used for validating the model. In next step, the effective factors on the groundwater potential such as altitude, slope aspect, slope angle, curvature, distance from rivers, drainage density, topographic wetness index, fault distance, fault density, lithology and land use were derived from the spatial geodatabases. Subsequently, the GPM was produced using WOE and EBF models. Finally, the validation of the GPMs was carried out using areas under the ROC curve (AUC). Results showed that the GPM prepared using WOE model has the success rate of 73.62%. Similarly, the AUC plot showed 76.21% prediction accuracy for the EBF model which means both the models performed fairly good predication accuracy. The GPMs are useful sources for planners and engineers in water resource management, land use planning and hazard mitigation purpose.  相似文献   

13.
滑坡的敏感性涉及到很多因素,如滑坡体的坡度、坡的朝向、坡度的类型、岩石特性、海拔高度、植被覆盖等特征。神经网络具有非线性映射能力,利用这些与滑坡发生紧密相关的因素作为网络的输入,构造一个具有反映滑坡敏感性的评价网络,输出端为敏感性分析的结果。本文针对某具体地区,提取相关因素,构造评价指标体系并量化,利用该地区样本集数据对滑坡敏感性评价神经网络进行训练,用训练后的网络对实例并结合模糊评判进行了相互验证,结果说明利用神经网络和模糊评判进行滑坡敏感性分析是可行的。  相似文献   

14.
This paper aims at providing an answer as to whether generalization obtained with data-driven modelling can be used to gauge the plausibility of the physically based (PB) model’s prediction. Two statistical models namely; Weight of Evidence (WofE) and Logistic Regression (LR), and a PB model using the infinite slope assumptions were evaluated and compared with respect to their abilities to predict susceptible areas to shallow landslides at the 1:10.000 urban scale. Threshold-dependent performance metrics showed that the three methods produced statistically comparable results in terms of success and prediction rates. However, with the Area Under the receiver operator Curve (AUC), statistical models are more accurate (88.7 and 84.6% for LR and WofE, respectively) than the PB model (only 69.8%). Nevertheless, in such data-sparse situation, the usual approaches for validation, i.e. comparing observed with predicted data, are insufficient, formal uncertainty analysis (UA) is a means for evaluating the validity and reliability of the model. We then refitted the PB model using a stochastic modification of the infinite slope stability model input scheme using Monte Carlo (MC) method backed with sensitivity analysis (SA). For statistical models, we used an informal Student t-test for estimating the certainty of the predicted probability (PP) at each location. Both modelling outputs independently show a high validity; and whereas the level of confidence in LR and WofE models remained the same after performance re-evaluation, the accuracy of the PB model showed an improvement (AUC = 72%). This result is reasonable and provides a further validation of PB model. So, in urban slope analysis, where PB diagnostic is necessary, statistical and PB modelling may play equally supportive roles in landslide hazard assessment.  相似文献   

15.
In this study, the spatial prediction of rainfall-induced landslides at the Pauri Gahwal area, Uttarakhand, India has been done using Aggregating One-Dependence Estimators (AODE) classifier which has not been applied earlier for landslide problems. Historical landslide locations have been collated with a set of influencing factors for landslide spatial analysis. The performance of the AODE model has been assessed using statistical analyzing methods and receiver operating characteristic curve technique. The predictive capability of the AODE model has also been compared with other popular landslide models namely Support Vector Machines (SVM), Radial Basis Function Neural Network (ANN-RBF), Logistic Regression (LR), and Naïve Bayes (NB). The result of analysis illustrates that the AODE model has highest predictability, followed by the SVM model, the ANN-RBF model, the LR model, and the NB model, respectively. Thus AODE is a promising method for the development of better landslide susceptibility map for proper landslide hazard management.  相似文献   

16.
A comprehensive Landslide Susceptibility Zonation (LSZ) map is sought for adopting any landslide preventive and mitigation measures. In the present study, LSZ map of landslide prone Ganeshganga watershed (known for Patalganga Landslide) has been generated using a binary logistic regression (BLR) model. Relevant thematic layers pertaining to the causative factors for landslide occurrences, such as slope, aspect, relative relief, lithology, tectonic structures, lineaments, land use and land cover, distance to drainage, drainage density and anthropogenic factors like distance to road, have been generated using remote sensing images, field survey, ancillary data and GIS techniques. The coefficients of the causative factors retained by the BLR model along with the constant have been used to construct the landslide susceptibility map of the study area, which has further been categorized into four landslide susceptibility zones from high to very low. The resultant landslide susceptibility map was validated using receiver operator characteristic (ROC) curve analysis showing an accuracy of 95.2 % for an independent set of test samples. The result also showed a strong agreement between distribution of existing landslides and predicted landslide susceptibility zones.  相似文献   

17.
In this study, landslide susceptibility assessments were achieved using logistic regression, in a 523 km2 area around the Eastern Mediterranean region of Southern Turkey. In reliable landslide susceptibility modeling, among others, an appropriate landslide sampling technique is always essential. In susceptibility assessments, two different random selection methods, ranging 78–83% for the train and 17–22% validation set in landslide affected areas, were applied. For the first, the landslides were selected based on their identity numbers considering the whole polygon while in the second, random grid cells of equal size of the former one was selected in any part of the landslides. Three random selections for the landslide free grid cells of equal proportion were also applied for each of the landslide affected data set. Among the landslide preparatory factors; geology, landform classification, land use, elevation, slope, plan curvature, profile curvature, slope length factor, solar radiation, stream power index, slope second derivate, topographic wetness index, heat load index, mean slope, slope position, roughness, dissection, surface relief ratio, linear aspect, slope/aspect ratio have been considered. The results showed that the susceptibility maps produced using the random selections considering the entire landslide polygons have higher performances by means of success and prediction rates.  相似文献   

18.
The current paper presents landslide hazard analysis around the Cameron area, Malaysia, using advanced artificial neural networks with the help of Geographic Information System (GIS) and remote sensing techniques. Landslide locations were determined in the study area by interpretation of aerial photographs and from field investigations. Topographical and geological data as well as satellite images were collected, processed, and constructed into a spatial database using GIS and image processing. Ten factors were selected for landslide hazard including: 1) factors related to topography as slope, aspect, and curvature; 2) factors related to geology as lithology and distance from lineament; 3) factors related to drainage as distance from drainage; and 4) factors extracted from TM satellite images as land cover and the vegetation index value. An advanced artificial neural network model has been used to analyze these factors in order to establish the landslide hazard map. The back-propagation training method has been used for the selection of the five different random training sites in order to calculate the factor’s weight and then the landslide hazard indices were computed for each of the five hazard maps. Finally, the landslide hazard maps (five cases) were prepared using GIS tools. Results of the landslides hazard maps have been verified using landslide test locations that were not used during the training phase of the neural network. Our findings of verification results show an accuracy of 69%, 75%, 70%, 83% and 86% for training sites 1, 2, 3, 4 and 5 respectively. GIS data was used to efficiently analyze the large volume of data, and the artificial neural network proved to be an effective tool for landslide hazard analysis. The verification results showed sufficient agreement between the presumptive hazard map and the existing data on landslide areas.  相似文献   

19.
The current paper presents landslide hazard analysis around the Cameron area, Malaysia, using advanced artificial neural networks with the help of Geographic Information System (GIS) and remote sensing techniques. Landslide locations were determined in the study area by interpretation of aerial photographs and from field investigations. Topographical and geological data as well as satellite images were collected, processed, and constructed into a spatial database using GIS and image processing. Ten factors were selected for landslide hazard including: 1) factors related to topography as slope, aspect, and curvature; 2) factors related to geology as lithology and distance from lineament; 3) factors related to drainage as distance from drainage; and 4) factors extracted from TM satellite images as land cover and the vegetation index value. An advanced artificial neural network model has been used to analyze these factors in order to establish the landslide hazard map. The back-propagation training method has been used for the selection of the five different random training sites in order to calculate the factor’s weight and then the landslide hazard indices were computed for each of the five hazard maps. Finally, the landslide hazard maps (five cases) were prepared using GIS tools. Results of the landslides hazard maps have been verified using landslide test locations that were not used during the training phase of the neural network. Our findings of verification results show an accuracy of 69%, 75%, 70%, 83% and 86% for training sites 1, 2, 3, 4 and 5 respectively. GIS data was used to efficiently analyze the large volume of data, and the artificial neural network proved to be an effective tool for landslide hazard analysis. The verification results showed sufficient agreement between the presumptive hazard map and the existing data on landslide areas.  相似文献   

20.
Avalanches are behind the majority of fatalities and heavy damage to property in snow-covered mountainous terrain like Himalaya. Recognizing avalanche susceptible areas and publication of avalanche susceptibility maps assist decision-makers and planners to execute suitable measures to reduce the avalanche risk. The present study is an attempt to prepare an avalanche susceptibility map of the Nubra valley region using multi-criteria decision analysis–analytical hierarchy process model in GIS environment. The most prominent avalanche occurrence factors used in this model are slope, aspect, curvature, elevation, terrain roughness and ground cover. ASTER GDEM V2 and Landsat 8 satellite imagery were used to generate considered factors. For validation of the results, prediction rate/accuracy is calculated using the avalanche inventory map of documented avalanche locations. To calculate the prediction accuracy, area under the ROC curve (ROC-AUC) method has been used. The prediction accuracy of the validation results using ROC-AUC shows 91%.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号