共查询到20条相似文献，搜索用时 31 毫秒
1.
The problem of rapid classification of the sea-floor sediment is addressed using horizontal line array (HLA) acoustic data from a passing surface ship. The data are beamformed to improve signal-to-noise ratio. The rapid geoacoustic characterization (RGC) algorithm involves extracting acoustic observables from the data (normalized striation slope, time spread, and transmission-loss slope). A simple single homogenous sediment layer over an acoustic half-space model is used to compute forward estimates of the acoustic observables. An exhaustive search over the two-parameter model is performed. The two parameters searched over are the sediment compressional speed (Cp), which is a polynomial function of the mean grain size (/spl phi/), and sediment thickness (H). This approach provides a real-time technique for classifying the sediment in a way that successfully reproduces the basic physics of propagation. 相似文献
2.
Fallat M.R. Nielsen P.L. Dosso S.E. Siderius M. 《Oceanic Engineering, IEEE Journal of》2005,30(1):198-206
This paper examines geoacoustic inversion over a range-dependent multiple-layer seabed using a towed acoustic source and towed horizontal array. The approach is based on combining the results of a series of short-range, range-independent inversions to form a range-dependent representation of the environment. The data were collected in the Strait of Sicily during the MAPEX 2000 experiment. Issues such as the resolvability of multilayer structure and the sensitivity of various geoacoustic parameters are investigated by inversion of simulated data and by comparison of the MAPEX 2000 inversion results to a high-resolution seismic profile and to sediment core measurements. It appears that two, and in some cases possibly three, sediment layers can be resolved. 相似文献
3.
Model-based geoacoustic inversion in range-dependent underwater environments is a challenging task constrained by data quality (synthetic or measured) and propagation-model efficiency and accuracy. The Inversion Techniques Workshop (ITW), held in Gulfport, MS, May 15-18, 2001, was organized for the acoustics community to present state-of-the-art numerical geoacoustic inversion capabilities in range-dependent shallow-water environments. The organizers defined five range-dependent test cases (three synthetic and two experimental cases). Two of the synthetic cases were adopted for geoacoustic inversion in this paper. The first test case (TC1) is a monotonic down-slope bathymetry problem and the adiabatic normal-mode model PROSIM was applied for the inversion in this case. The second test case (TC3) is a flat-bottom case with an intrusion. The forward model used in this case was RAMGEO. The global optimization package SAGA was used for geoacoustic inversion of the synthetically generated reference solutions for TC1 and TC3. In general, the geoacoustic inversion results are in good agreement with the true solutions provided by the organizers. The results obtained demonstrate the feasibility of performing geoacoustic inversion in synthetic range-dependent shallow-water environments. However, results show that the propagation model choice in the inversion is strongly dependent on the specific range-dependent environment. 相似文献
4.
Heaney K.D. Sternlicht D.D. Teranishi A.M. Castile B. Hamilton M. 《Oceanic Engineering, IEEE Journal of》2004,29(1):100-109
A survey of received acoustic energy levels from a seismic profiler were performed in Long Beach Harbor, CA, for compliance with the Marine Mammal Protection Act (MMPA). In addition to direct acoustic measurements, a rapid geoacoustic inversion algorithm was applied to the data to estimate the sediment properties acoustically. This inversion algorithm has matching criteria based on time spread, range-frequency interference patterns, and the range dependence of transmission loss. Self-consistency was checked by comparing acoustic measurements with predictions based on the inversion. With an estimated geoacoustic profile, predictions of received levels as a function of position in the range-dependent environment of Long Beach Harbor were then performed. 相似文献
5.
Dosso S.E. Yeremy M.L. Ozard J.M. Chapman N.R. 《Oceanic Engineering, IEEE Journal of》1993,18(3):232-239
A method for estimating properties of the ocean bottom such as bathymetry and geoacoustic parameters such as sound speed, density and attenuation, using matched-field inversion is considered. The inversion can be formulated as an optimization problem by assuming a discrete model of unknown parameters and a bounded search space for each parameter. The optimization then involves finding the set of parameter values which minimizes the mismatch between the measured acoustic field and modeled replica fields. Since the number of possible models can be extremely large, the method of simulated annealing, which provides an efficient optimization that avoids becoming trapped in suboptimal solutions, has been used. The matching fields are computed using a normal mode model. In inversions for range-dependent parameters, the adiabatic approximation is employed. This allows mode values to be precomputed for a grid of parameter values and stored in look-up tables for fast reference, which greatly improves computational efficiency. Synthetic inversion examples are presented for realistic range-independent and range-dependent environments 相似文献
6.
In this paper, we use matched-field inversion methods to estimate the geoacoustic parameters for three synthetic test cases from the Geoacoustic Inversion Techniques Workshop held in May 2001 in Gulfport, MS. The objective of this work is to use a sparse acoustic data set to obtain estimates of the parameters as well as an indication of their uncertainties. The unknown parameters include the geoacoustic properties of the sea bed (i.e., number of layers, layer thickness, density, compressional speed, and attenuation) and the bathymetry for simplified range-dependent acoustic environments. The acoustic data used to solve the problems are restricted to five frequencies for a single vertical line array of receivers located at one range from the source. Matched-field inversion using simplex simulated annealing optimization is initially used to find a maximum-likelihood (ML) estimate. However, the ML estimate provides no information on the uncertainties or covariance associated with the model parameters. To estimate uncertainties, a Bayesian formulation of matched-field inversion is used to generate posterior probability density distributions for the parameters. The mean, covariance, and marginal distributions are determined using a Gibbs importance sampler based on the cascaded Metropolis algorithm. In most cases, excellent results were obtained for relatively sensitive parameters such as wave speed, layer thickness, and water depth. The variance of the estimates increase for relatively insensitive parameters such as density and wave attenuation, especially when noise is added to the data. 相似文献
7.
Fialkowski L.T. Lingevitch J.F. Perkins J.S. Dacol D.K. Collins M.D. 《Oceanic Engineering, IEEE Journal of》2003,28(3):370-379
An efficient method for geoacoustic inversions in a range-dependent ocean waveguide is implemented and tested with synthetic data. This method combines a simulated annealing search with an optimal coordinate rotation that increases the efficiency of navigating parameter landscapes for which parameter coupling is important. The coordinate rotation associated with the parameter couplings also provides information about which parameters are resolvable for a particular inversion frequency and array geometry. Using this information, results from several single-frequency inversions can be combined to obtain an estimate for the sediment parameters. 相似文献
8.
《Oceanic Engineering, IEEE Journal of》2009,34(4):586-602
9.
Chapman N.R. Chin-Bing S. King D. Evans R.B. 《Oceanic Engineering, IEEE Journal of》2003,28(3):320-330
Inversion methods have been developed over the past decade to extract information about unknown ocean-bottom environments from acoustic field data. This paper summarizes results from the Office of Naval Research/Space and Naval Warfare Systems Command (SPAWAR) Geoacoustic Inversion Techniques Workshop, which was designed to benchmark present-day inversion methods. The format of the workshop was a blind test to estimate unknown geoacoustic profiles by inversion of synthetic acoustic field data. The fields were calculated using a high-angle parabolic approximation and verified using coupled normal modes for three range-dependent shallow-water test cases: a monotonic slope; a shelf break; and a fault intrusion in the sediment. Geoacoustic profiles were generated to simulate sand, silt, and mud sediments in these environments. Several different approaches for inverting the acoustic field data were presented at the workshop: model-based matched-field methods; perturbation methods; methods using transmission loss data; and methods using horizontal array information. An effective inversion must provide both an estimate of the bottom parameters and a measure of the uncertainty of the estimated values. New methods were presented at the workshop to formalize the measure of uncertainty in the inversion. Comparisons between the different inversions are discussed in terms of a metric-based transmission loss calculated using the inverted profiles. The results demonstrate the effectiveness of present-day inversion techniques and indicate the limits of their capabilities for range-dependent waveguides. 相似文献
10.
Matched-fieId inversion (MFI) undertakes to estimate the geometric and geoacoustic parameters in an ocean acoustic scenario by matching acoustic field data recorded at hydrophone array with numerical calculations of the field. The model which provides the best fit to the data is the estimate of the actual experimental scenario. MFI provides a comparatively inexpensive method for estimating ocean bottom parameters over an extensive area. The basic components of the inversion process are a sound propagation model and matching (minimization) algorithm. Since a typical MFI problem requires a large number of computationally intensive sound propagation calculations, both of these components have to be efficient. In this study, a hybrid inversion algorithm which uses a parabolic equation propagation model and combines the downhill simplex algorithm with genetic algorithms is introduced. The algorithm is demonstrated on synthetic range-dependent shallow-water data generated using the parabolic equation propagation model. The performance for estimating the model parameters is compared for realistic signal-to-noise ratios in the synthetic data 相似文献
11.
为准确建立海底地声模型,本文探讨地声模型的基本组成和基本结构。通过样品实验室测量,分析南海海底表层沉积物的密度、孔隙度与声速随着埋深变化的关系,得出海底实际存在的低声速表面–声速缓慢变化类型、低声速表面–声速增大类型、高声速表面–声速缓慢变化类型和高声速表面–声速增大类型4种典型地声结构;对比钻探测量,分析黄海海底沉积物的密度、孔隙度与声速随埋深变化关系,得出海底地声模型分层特征与地声结构组合特征。研究表明,地声模型可以归结为4种基本地声结构的组合,通过与底层海水声速、同层内声速剖面以及与上层海底沉积物下表面声速的比较,可以建立各种海底地声模型;基于实验室测量法建立的地声模型可以作为参考地声模型,但需要考虑实际海底温度和压力梯度以及海底沉积物的频散特性等,借助于声速比校正法和频散性理论模型进行计算及修正。 相似文献
12.
This paper applies a Bayesian formulation to range-dependent geoacoustic inverse problems. Two inversion methods, a hybrid optimization algorithm and a Bayesian sampling algorithm, are applied to some of the 2001 Inversion Techniques Workshop benchmark data. The hybrid inversion combines the local (gradient-based) method of downhill simplex with the global search method of simulated annealing in an adaptive algorithm. The Bayesian inversion algorithm uses a Gibbs sampler to estimate properties of the posterior probability density, such as mean and maximum a posteriori parameter estimates, marginal probability distributions, highest-probability density intervals, and the model covariance matrix. The methods are applied to noise-free and noisy benchmark data from shallow ocean environments with range-dependent geophysical and geometric properties. An under-parameterized approach is applied to determine the optimal model parameterization consistent with the resolving power of the acoustic data. The Bayesian inversion method provides a complete solution including quantitative uncertainty estimates and correlations, while the hybrid inversion method provides parameter estimates in a fraction of the computation time. 相似文献
13.
Estimates of geoacoustic model parameters from inversions of horizontal and vertical line array data
This paper describes results from geoacoustic inversion of low-frequency acoustic data recorded at a receiving array divided into two sections, a sparse bottom laid horizontal array (HLA) and a vertical array (VLA) deployed in shallow water. The data are from an experiment conducted by the Norwegian Defence Research Establishment (FFI) in the Barents Sea, using broadband explosives (shot) sources. A two-layer range-independent geoacoustic model, consistent with seismic profiles from the area, described the environment. Inversion for geoacoustic model parameters was carried out using a fast implementation of the hybrid adaptive simplex simulated annealing (ASSA) inversion algorithm, with replica fields computed by the ORCA normal mode code. Low-frequency (40-128 Hz) data from six shot sources at ranges 3-9 km from the array were considered. Estimates of sediment and substrate p-wave velocities and sediment thickness were found to be consistent between independent inversions of data from the two sections of the array. 相似文献
14.
The self-starter is improved using the operator of the split-step Pade solution. In addition to providing greater stability and being applicable closer to the source, the improved self-starter is an efficient forward model for geoacoustic inversion. It is necessary to solve only O(10) tridiagonal systems of equations to obtain the acoustic field on a vertical array located O(10) wavelengths from a source. This experimental configuration is effective for geoacoustic inverse problems involving unknown parameters deep in the ocean bottom. For problems involving depth-dependent acoustic parameters, the improved self-starter can be used to solve nonlinear inverse problems involving O(10) unknown sediment parameters in less than a minute on the current generation of workstations 相似文献
15.
16.
Using the well-established technique of geoacoustic inversion, one can estimate a set of acoustic sea-bed parameters from sonar array data. Simultaneously, one can search for geometric parameters such as range, water depth, and hydrophone depth. When the technique is applied in a range-dependent environment, there is a potentially much larger set of parameters to match, unless one has perfect knowledge of the bathymetry. From the point of view of optimization, one needs to handle uncertainties in bathymetry without hugely increasing the amount of computation. A simple time-domain view (which is shown to be equivalent to the adiabatic approximation) suggests that it is sufficient to use a range-independent model with an empirical "effective" depth even when the bottom is not flat. In fact, there is a set of effective environments that will suffice; one can choose whichever is the most convenient. The success of this concept is demonstrated with some test cases from a recent Geoacoustic Inversion Techniques Workshop. 相似文献
17.
多频海底声学原位测试系统研制和试用 总被引：9，自引：2，他引：9
海底沉积物的声学特性(最重要的是声速和声衰减)以及它们与物理(包括土力学)特性之间的关系是沉积物声学中两个重要的研究项目.介绍了新研制的实时监控多频海底声学原位测试系统.该系统可测量浅表层沉积物的声速.探测频率为8,10,12,15 kHz,可根据实际情况选择发射波形、接收增益和采样长度,采样率为0.5~2.0 MHz,工作水深为300 m.系统具有倾斜传感器、8通道扩充等功能.用该系统在杭州湾测得了四种频率的沉积物原位声速. 相似文献
18.
The broad-band acoustic characterization of the Hudson Canyon region off the New Jersey Continental Shelf is studied with an analysis of pressure time series generated by small explosive sources and recorded on a vertical line array (VLA). The average water depth is about 72 m and the average sound-speed profile (SSP) is downward-refracting over the midportions of the water column. The seabed is characterized by sediment layers possessing sand-like characteristics. The sound-speed structure of the water column and the seabed structure create distinguishing modal features in the impulse response in the 250-500-Hz hand. The details of the depth and range dependence of the time series on the VLA are sensitive to small perturbations of the structure of the upper layer of the SSP, the water depth, and the seabed structure. This sensitivity of the acoustic field is investigated using a broad-band range-dependent normal mode model called NAUTILUS. The representation of the spatial and temporal structure of the time series in terms of a modal structure reveals several unique effects of the SSP and the geoacoustic structure of the bottom on the group velocity of the modes over a large bandwidth. Individual modes can be identified in the measured data using direct data-simulation comparisons. Cross-correlation values between data and simulations in a 155-ms time window generally vary from 0.7 to 0.9 for sensors below the thermocline but are much smaller for sensors above the thermocline 相似文献
19.
为了对海底声学参数反演中的估计精度做出预估,合理解释反演结果,本文基于Jackson海底声散射模型,利用Sobol算法,对该模型中的耗散系数、速度比等7个参数进行定量的敏感度分析。Sobol算法可以给出参数的一阶敏感度和参数间相互作用的敏感度,适用于分析散射强度的影响因子。仿真结果表明,所选择的声波频率对于参数的敏感度影响不大,模型各参数交互作用较为强烈,速度比的全局敏感度最大,而耗散系数敏感度很小。将参数划分为地声属性参数、粗糙度参数和非均匀性参数,地声属性参数敏感度最大。模型参数敏感度分析结果对于反演有一定的指导作用。 相似文献
20.
The paper discusses an inversion method that allows the rapid determination of in situ geoacoustic properties of the ocean bottom without resorting to large acoustic receiving apertures, synthetic or real. The method is based on broad-band waterborne measurements and modeling of the waveguide impulse response between a controlled source and a single hydrophone. Results from Yellow Shark '94 experiments in Mediterranean shallow waters using single elements of a vertical array are reviewed, inversion of the bottom parameters is performed with an objective function that includes the processing gain of a model-based matched filter (MBMF) receiver relative to the conventional matched filter. The MBMF reference signals incorporate waveguide Green's functions for known geometry and water column acoustic model and hypothesized bottom geoacoustic models. The experimental inversion results demonstrated that, even for complex environmental conditions, a single transmission of a broad-band (200-800 Hz) coded signal received at a single depth and a few hundred forward modeling runs were sufficient to correctly resolve the bottom features. These included the sound speed profile, attenuation, density, and thickness of the top clay sediment layer, and sound speed and attenuation of the silty clay bottom. Exhaustive parameter search proved unequivocally the low-ambiguity and high-resolution properties of the MBMF-derived objective. The single-hydrophone results compare well with those obtained under identical conditions from matched-field processing of multitone pressure fields sampled on the vertical array. Both of these results agree with expectations from geophysical ground truth. The MBMF has been applied successfully to a field of advanced drifting acoustic buoys on the Western Sicilian shelf, demonstrating the general applicability of the inversion method presented 相似文献