共查询到20条相似文献，搜索用时 526 毫秒
1.
The authors are grateful to the derivation and correction addressed by Shi and Kirby (2008) for the calculation of the wave setup and setdown induced by obliquely incident waves. The mathematical equations for the expression of setup and setdown are rederived in which the velocity potential is expanded to the second-order on the still water lever. The correct form of setdown presented by Shi and Kirby is confirmed in the present paper. 相似文献
2.
Water level variations due to obliquely incident, shoaling and breaking waves on a plane sloping beach were discussed recently by Hsu et al. (Coastal Engineering, 53, 865–877, 2006). An inconsistency in this work with respect to the set-down, and its implications to circulation offshore of the breakpoint, was pointed out by Shi and Kirby (Coastal Engineering, 55, 1246 – 1249, 2008). Here we extend that discussion to include the surfzone momentum balance and wave-induced set-up. We discuss some remaining inconsistencies in the approximation of the surfzone momentum balance, derive and present a consistent approximation, and validate the new approximation through numerical comparison to a more exact model. 相似文献
3.
《Coastal Engineering》2006,53(10):865-877
An analytical theory is developed for the wave setup and setdown induced by obliquely incident waves on an impermeable swell-built beach profile. The wave setup and setdown are found to decrease as wave obliquity increases. The incorporation of wave obliquity in wave setup and setdown formulation offers the physical reality in engineering applications. The general solutions presented in this paper yield the limiting case of normal wave incidence and the result is consistent with the classical theories published. The present theory is primarily applicable to the spilling and plunging breaker across the surf zone, within which wave amplitude is assumed to be linearly related to the local water depth. Experiments were conducted in a large-scale wave basin to compare with theoretical results and especially to investigate the applicability of this assumption to the case of obliquely incident waves. The dimensionless setup versus the distance offshore within the surf zone is found to depend on wave breaking angle and the shape of the beach profile; and it has a non-zero value at the original shoreline position. This implies that the original shoreline will advance landwards, and that the extent of this movement can be related to wave angle at breaking and the beach profile under consideration. The results of the present theory are in good agreement with experimental data and field measurements available. 相似文献
4.
The relative importance of radiation stress gradients and alongshore pressure gradients to surfzone dynamics is investigated using observations of water levels, waves, and flows measured onshore of a large ebb-tidal delta. Incident wave heights measured along the ~ 11-m depth contour varied about 10% over a 1.2-km alongshore transect, resulting in alongshore wave setup differences on the order of 10 cm over the 600-m extent of the surfzone instrument array in 1.5-m depth. Despite the moderate alongshore variability in wave heights, the southerly alongshore pressure gradient, associated with the alongshore variability of wave-driven set-up, was typically twice as large as the northerly radiation stress gradient forcing, consistent with the observed southerly currents during the week-long experiment. The magnitude of the alongshore forcing and resulting alongshore velocity is reproduced by the two-dimensional depth-averaged numerical model of Shi et al. (JGR-Oceans, 2011). These observations, together with the numerical results, indicate that moderate alongshore wave height gradients (O(10− 4)) outside the surfzone owing to alongshore variations in the offshore bathymetry can result in alongshore pressure gradients that are larger than radiation stress gradients. 相似文献
5.
6.
Noriyuki Iwata 《Journal of Oceanography》1976,32(1):1-10
Mass, momentum and energy conservation laws, including the radiation stress, are used to derive an equation of the eigenvalues of rip current spacing.A coastal region with linear bottom slope is divided into two parts: Offshore region and surfzone separated by the breaker line. Wave set-up, wave energy and mean current are assumed to be composed of basic state, which is a function of the distance from the coast to offshore only, and of superposed two-dimensional perturbations.In the case of normal incidence of waves, basic steady current system vanishes and perturbations are found to be of cellular shape. According to the boundary conditions at the coast, stream function of perturbed motion in the surfzone can be represented by the confluent hypergeometric function, while in the offshore zone it is approximated by the modified Bessel function.Interpolation of the stream functions in the surf and offshore regions enables us to obtain a characteristic relation which gives the eigenvalues of nondimensional alongshore spacing of rip current system as a function of a parameter determined by the bottom friction coefficient, width of the surfzone and breaker height. 相似文献
7.
《Coastal Engineering》2006,53(2-3):149-156
Wave setup can contribute significantly to elevated water levels during severe storms. In Florida we have found that wave setup can be 30% to 60% of the total 100-year storm surge. In areas with relatively narrow continental shelves, such as many locations along the Pacific Coast of the United States, wave setup can be an even larger proportionate contributor of anomalous water levels during major storms. Wave setup can be considered as comprising two components, with the first being the well-known static wave setup resulting from the transfer of breaking wave momentum to the water column. The second, oscillating component, is a result of nonlinear transfer of energy and momentum from the primary (linear) spectrum to waves with length and time scales on the order of the wave groups.Static wave setup is the focus of this paper with emphasis on effects due to internal or surface forces that act on the wave system and cause both dissipation of wave energy and transfer of momentum. In particular, the effects of wave damping by vegetation and bottom friction are considered. Linear wave theory is applied to illustrate these effects and, for shallow water waves, the setup is reduced by two-thirds the amount that would occur if the same amount of energy dissipation occurred in the absence of forces. Effects of nonlinear waves are then considered and it is found, for a shallow water wave of approximately one-half breaking height, that a wave setdown rather than setup occurs due to damping by vegetation and bottom friction.The problem of wave setup as waves propagate through vegetation was stimulated by studies to establish hazard zones associated with 100-year storm events along the shorelines of the United States. These storms can generate elevated water levels exceeding 4 to 6 m and can result in overland wave propagation. As these waves propagate through vegetation and damp, the question arose as to the contribution of this process to elevated mean water levels through additional wave setup. 相似文献
8.
An offshore shoal or bar refracts ocean surface waves and causes wave focusing/defocusing on the adjacent beach.Wave focal patterns characterized by alongshore variations in wave height, wave angle, and breaking location induce alongshore non-uniformities of wave setup and nearshore circulation, e.g., rip currents and alongshore currents, in the surfzone. A simplified analytic model for nearshore circulation generated by focused/defocused waves on a planar beach is developed and theoretical solutions are obtained using transport stream function and perturbations in alongshore distributions of wave height and wave angle at the breaker line. The analytic model suggests that alongshore currents are strongly affected by a pair of counter-rotating vortices generated shoreward of the wave focal zone. The vortices are persistent, and their strengths depend on the amplitudes of alongshore variations in wave height and wave angle. The alongshore gradient in wave height tends to intensify the vortices while the convergence of wave angle tends to weaken the vortices. Divergent flows associated with the vortices in the surfzone are intense,strengthening alongshore currents in the downstream of the wave focal zone and weakening alongshore currents or causing flows reversal in the upstream. Alongshore currents are modulated by rip currents associated with the wave focusing/defocusing patterns. 相似文献
9.
We present the derivation of the discrete Euler–Lagrange equations for an inverse spectral element ocean model based on the shallow water equations. We show that the discrete Euler–Lagrange equations can be obtained from the continuous Euler–Lagrange equations by using a correct combination of the weak and the strong forms of derivatives in the Galerkin integrals, and by changing the order with which elemental assembly and mass averaging are applied in the forward and in the adjoint systems. Our derivation can be extended to obtain an adjoint for any Galerkin finite element and spectral element system.We begin the derivations using a linear wave equation in one dimension. We then apply our technique to a two-dimensional shallow water ocean model and test it on a classic double-gyre problem. The spectral element forward and adjoint ocean models can be used in a variety of inverse applications, ranging from traditional data assimilation and parameter estimation, to the less traditional model sensitivity and stability analyses, and ensemble prediction. Here the Euler–Lagrange equations are solved by an indirect representer algorithm. 相似文献
10.
《Ocean Modelling》2011,39(3-4):230-243
A three-dimensional numerical model was established to simulate the wave-induced currents. The depth-varying residual momentum, surface roller, wave horizontal and vertical turbulent mixing effects were incorporated as major driving forces. A surface roller evolution model considering the energy transfer, roller density and bottom slope dissipation was developed. The expression of the wave-induced horizontal turbulent mixing coefficient proposed by Larson and Kraus (1991) was extended to three-dimensional form. Plenty of experimental cases were used to validate the established model covering the wave setup, undertow, longshore currents and rip currents. Validation results showed the model could reasonably describe the main characteristics of different wave-induced current phenomena. The incorporation of surface roller for breaking waves should not be neglected in the modeling of surfzone hydrodynamics. The wave-induced turbulent mixing affects the structures of wave-induced current either in horizontal or in vertical directions. Sensitivity analysis of the major calibration parameters in the established model was made and their ranges were evaluated. 相似文献
11.
Coastline sand waves have been observed at “El Puntal” spit, located on the north coast of Spain. The spit has been monitored by an Argus video system since 2003 and the formation and destruction of sand waves has been observed. Coastline data from the video images are analyzed by means of principal components analysis, obtaining a mean sand wave length of 125–150 m and a maximum amplitude of ≈ 15 m. It is also observed that sand waves reach their maximum amplitude at about 15 days. No propagation of these sand waves is noticed during the approximately two-month-long events analyzed. Sand wave formation and evolution are examined in relation with the prevailing local wave conditions during that period. Incident waves at the west end of the spit approach from the east–northeast, with a very high angle with respect to the shoreline. Field observations suggest that sand waves may result from an instability in alongshore sediment transport caused by moderate-energy waves with a high-angle incidence. 相似文献
12.
XIE Ming-xiao ZHANG Chi YANG Zhi-wen LI Shan LI Xin GUO Wei-jun ZUO Shu-hua 《海洋工程》2017,31(5):549-558
A process-based 3D numerical model for surfzone hydrodynamics and beach evolution was established. Comparisons between the experimental data and model results proved that the model could effectively describe the hydrodynamics, sediment transport feature and sandbar migration process in the surfzone with satisfactory precision. A series of numerical simulations on the wave breaking and shoaling up to a barred beach were carried out based on the model system. Analyzed from the model results, the wave-induced current system in the surfzone consists of two major processes, which are the phase-averaged undertow caused by wave breaking and the net drift caused by both of the nonlinear wave motion and surface roller effect. When storm waves come to the barred beach, the strong offshore undertow along the beach suppresses the onshore net drift, making the initial sandbar migrate to the seaside. Under the condition of calm wave environment, both the undertow and net drift flow to the shoreline at the offshore side of the sandbar, and then push the initial sandbar to the shoreline. The consideration of surface roller has significant impact on the modeling results of the sandbar migration. As the roller transfer rate increases, the sandbar moves onshore especially under the storm wave condition. 相似文献
13.
Heated seawater effluent released from coastal electric-generating stations alters the abundance and distribution of organisms near an outfall. It is hypothesized that large aggregations of round stingrays, Urobatis halleri, occurring near an outfall at Seal Beach, California are attracted to the heated effluent. Stingray densities were significantly higher at Seal Beach outfall sites than at a non-outfall site at Surfside; densities were also higher within 30m of the surfzone than 31-60 m from the surfzone. Water temperatures were higher at Seal Beach than at Surfside, and were also higher within 30m of the surfzone than 31-60 m from the surfzone. These results suggest U. halleri prefer warmer effluent water near the surfzone at Seal Beach to cooler, ambient water further offshore. Heated effluent, reduced swell exposure, and fresh water input may mimic natural estuarine conditions and provide U. halleri with an urbanized alternative to lost natural habitat. 相似文献
14.
This paper describes the development of a numerical model for wave overtopping on seadikes. The model is based on the flux-conservative form of the nonlinear shallow water equations (NLSW) solved with a high order total variation diminishing (TVD), Roe-type scheme. The goal is to reliably predict the hydrodynamics of wave overtopping on the dike crest and along the inner slope, necessary for the breach modelling of seadikes. Besides the mean overtopping rate, the capability of simulating individual overtopping events is also required. It is shown theoretically that the effect of wave breaking through the drastic motion of surface rollers in the surfzone is not sufficiently described by the conventional nonlinear shallow water equations, neglecting wave setup from the mean water level and thus markedly reducing the model predictive capacity for wave overtopping. This is significantly improved by including an additional source term associated with the roller energy dissipation in the depth-averaged momentum equation. The developed model has been validated against four existing laboratory datasets of wave overtopping on dikes. The first two sets are to validate the roller term performance in improving the model prediction of wave overtopping of breaking waves. The last two sets are to test the model performance under more complex but realistic hydraulic and slope geometric conditions. The results confirm the merit of the supplemented roller term and also demonstrate that the model is robust and reliable for the prediction of wave overtopping on seadikes. 相似文献
15.
波浪与水流共同作用下的底砂起动 总被引：3，自引：0，他引：3
研究波浪与水流共同作用下底砂的起动,对于研究和解决河口海岸地区的冲淤变化、沿海航道的变迁、堤岸工程和闸下淤积的疏(氵尤夂)等问题,以及从理论上和实践中分析泥沙回淤及输沙量都具有重要的现实意义。 本文通过理论推导和实验观测,对波浪、水流共同作用下的底砂起动进行了研究探讨。 相似文献
16.
Tide-driven bed load transport is an important portion of the net annual sediment transport rate in many shoreface and shelf environments. However, bed load transport under waves cannot be measured in the field and bed load transport by currents without waves is barely measurable, even in spring tidal conditions. There is, consequently, a strong lack of field data and validated models. The present field site was on the shoreface and inner shelf at 2 to 8.5 km offshore the central Dutch coast (far outside the surfzone), where tidal currents flow parallel to the coast. Bed load transports were carefully measured with a calibrated sampler in spring tidal conditions without waves at a water depth of 13–18 m with fine and medium sands. The near-bed flow was measured over nearly a year and used for integration to annual transport rates. An empirical bed load model was derived, which predicts bed load transports that are a factor of > 5 smaller than predicted by existing models. However, they agree with laboratory data of sand and gravel transport in currents near incipient motion. The damped transport rates may have been caused by cohesion of sediment or turbulence damping due to mud or biological activity. The annual bed load transport rate was calculated using a probability density function (pdf) derived from the near-bed current and orbital velocity data which represented the current and wave climate well when compared to 30 years of data from a nearby wave station. The effect of wave stirring was included in the transport calculations. The net bed load transport rate is a few m2/year. This is much less than predicted in an earlier model study, which is partly due to different bed load models but also due to the difference in velocity pdf. The annual transport rate is very sensitive to the probability of the largest current velocities. 相似文献
17.
The conditions for energy flux, momentum flux and the resulting streaming velocity are analysed for standing waves formed in front of a fully reflecting wall. The exchange of energy between the outer wave motion and the near bed oscillatory boundary layer is considered, determining the horizontal energy flux inside and outside the boundary layer. The momentum balance, the mean shear stress and the resulting time averaged streaming velocities are determined. For a laminar bed boundary layer the analysis of the wave drift gives results similar to the original work of Longuet–Higgins from 1953. The work is extended to turbulent bed boundary layers by application of a numerical model. The similarities and differences between laminar and turbulent flow conditions are discussed, and quantitative results for the magnitude of the mean shear stress and drift velocity are presented. Full two-dimensional simulations of standing waves have also been made by application of a general purpose Navier–Stokes solver. The results agree well with those obtained by the boundary layer analysis. Wave reflection from a plane sloping wall is also investigated by using the same numerical model and by physical laboratory experiments. The phase shift of the reflected wave train is compared with theoretical and empirical models. 相似文献
18.
《Coastal Engineering》2006,53(5-6):419-439
The flow on a plane beach with a random, directionally spread wave field was simulated with a Boussinesq model. The random wave spectra were directionally symmetric with their central direction perpendicular to the beach, so no constant longshore current was generated. Variable wave-averaged currents were generated because of the spatially variable wave field, and sometimes formed offshore directed rip currents that appear in variable longshore locations. The rip currents are associated with a vortex pair which is generated within the surfzone and subsequently propagates offshore. Analysis of the vorticity balance show that the main vorticity input occurs within the inner surfzone. Three different beach slopes and four different wave spectra are simulated. The frequency, duration, and intensity of the transient rips depend on both the beach slope and the incident wave spectra. The results have important engineering implications for the transport of material in the nearshore zone, in particular on longshore uniform beaches. 相似文献
19.
By applying the linear water wave theory and the eigenfunction expansion method, the wave reflection by a vertical wall with a horizontal submerged porous plate is investigated in this paper. The numerical results, concerning the effects of the dimensionless plate length, the relative water depth, and the porous effect parameter of the plate on the wave loads on the plate and the wave height near the wall as well as the reflection coefficient, are discussed. It is found that the submerged plate increases the complexity of the phenomenon related to the wave reflection and refraction in the close region of the wall, and leads to the occurrence of the phenomenon of wave trapping. The results indicate that there may exist a process of focusing wave energy near the wall for small dimensionless porous effect parameters, whereas the increase of the dimensionless porous effect parameter decreases gradually the wave height until setdown occurs. The behavior of a larger plate with proper porosity is similar to that of a wave absorber which can significantly suppress not only the wave height above the plate but also the reflection waves. The ability of the porous plate to reduce the wave height on the wall surface is, in general, directly proportional to the dimensionless plate length and may be strongest for a proper value of the dimensionless porous effect parameter. It is also demonstrated that the wave loads on a porous plate are smaller than those on an impermeable plate. 相似文献
20.
Mean water level setup/setdown in the inlet-lagoon system induced by tidal action-a case study of Xincun Inlet, Hainan Island in China 总被引：2，自引：1，他引：1
With the tides propagating from the open sea to the lagoon, the mean water level （MWL） in the inlet and lagoon becomes different from that at the open sea, and a setup/setdown is generated. The change of MWL （setup/setdown） in the system imposes a great impact on regulating the development of tidal marshes, on determining the long-term water level for harbor maintenance, on the planning for the water front development with the flood control for the possible inundation, and on the interpretation of the historical sea level change when using tidal marsh peat deposits in the lagoon as the indicator for open sea＇ s sea level. In this case study on the mechanisms which control the setup/setdown in Xincun Inlet, Hainan in China, the 2-D barotropic mode of Eulerian - Lagrangian CIRCulation （ELCIRC） model was utilized. After model calibration and verification, a series of numerical experiments were conducted to examine the effects of bottom friction and advection terms, wetting and drying of intertidal areas, bathymetry and boundary conditions on the setup/setdown in the system. The modeling results show that setup occurs over the inlet and lagoon areas with an order of one tenth of the tide range at the entrance. The larger the bottom friction is, a larger setup is generated. Without the advection term, the setup is reduced clue to a decrease of water level gradient to compensate for the disappearance of the advection term. Even without overtides, a setup can still be developed in the system. Sea level rise and dredging in the inlet and tidal channel can cause a decrease of setup in the system, whereas shoaling of the system can increase the setup. The uniqueness of the Xincun Inlet with respect to MWL change is that there is no evident setdown in the inlet, which can be attributed to the complex geometry and bathymetry associated with the inlet system. 相似文献