首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 0 毫秒
1.
The time domain electromagnetic (TDEM) geophysical method was employed to detect saline groundwater bodies within and in the close margins of the Arava Rift Valley. The Arava Valley aquifers are known to occupy fresh to saline groundwater. The lateral subsurface inflow to the Arava from west and east is characterized by fresh to brackish waters. The results of the present study indicate that salination of groundwater is controlled by both present day and ancient base levels, namely by the Dead Sea in the north and by the Gulf of Elat in the south. The configuration obtained by the TDEM survey exhibits interfaces and palaeo-interfaces between fresh to brackish waters and underlying seawater or diluted seawater intruded inland from both base levels as well as brines intruded from the northern base level. The central Arava structural and hydrological divide seems to escape seawater or brine encroachment at least to the considerable depth of the TDEM measurements.  相似文献   

2.
The alluvial aquifer is the primary source of groundwater along the eastern Dead Sea shoreline, Jordan. Over the last 20 years, salinity has risen in some existing wells and several new wells have encountered brackish water in areas thought to contain fresh water. A good linear correlation exists between the water resistivity and the chloride concentration of groundwater and shows that the salinity is the most important factor controlling resistivity. Two-dimensional electrical tomography (ET) integrated with geoelectrical soundings were employed to delineate different water-bearing formations and the configuration of the interface between them. The present hydrological system and the related brines and interfaces are controlled by the Dead Sea base level, presently at 410 m b.s.l. Resistivity measurements show a dominant trend of decreasing resistivity (thus increasing salinity) with depth and westward towards the Dead Sea. Accordingly, three zones with different resistivity values were detected, corresponding to three different water-bearing formations: (1) strata saturated with fresh to slightly brackish groundwater; (2) a transition zone of brine mixed with fresh to brackish groundwater; (3) a water-bearing formation containing Dead Sea brine. In addition, a low resistivity unit containing brine was detected above the 1955 Dead Sea base level, which was interpreted as having remained unflushed by infiltrating rain.  相似文献   

3.
TDEM (time domain electromagnetic) traverses in the Dead Sea (DS) coastal aquifer help to delineate the configuration of the interrelated fresh-water and brine bodies and the interface in between. A good linear correlation exists between the logarithm of TDEM resistivity and the chloride concentration of groundwater, mostly in the higher salinity range, close to that of the DS brine. In this range, salinity is the most important factor controlling resistivity. The configuration of the fresh–saline water interface is dictated by the hydraulic gradient, which is controlled by a number of hydrological factors. Three types of irregularities in the configuration of fresh-water and saline-water bodies were observed in the study area: 1. Fresh-water aquifers underlying more saline ones ("Reversal") in a multi-aquifer system. 2. "Reversal" and irregular residual saline-water bodies related to historical, frequently fluctuating DS base level and respective interfaces, which have not undergone complete flushing. A rough estimate of flushing rates may be obtained based on knowledge of the above fluctuations. The occurrence of salt beds is also a factor affecting the interface configuration. 3. The interface steepens towards and adjacent to the DS Rift fault zone. Simulation analysis with a numerical, variable-density flow model, using the US Geological Survey's SUTRA code, indicates that interface steepening may result from a steep water-level gradient across the zone, possibly due to a low hydraulic conductivity in the immediate vicinity of the fault. Electronic Publication  相似文献   

4.
The Bet She’an and Harod Valleys are regional recipients and mixing zones for groundwater draining to these valleys from a multiple aquifer system. This aquifer system includes two different carbonate aquifers, several groundwater-bearing basalt flows and deep-seated pressurized brine, the upflow of which causes salinization of fresh groundwater bodies. These aquifers drain through two groups of springs. Due to lack of information on the subsurface structure of the valley the flow-paths of groundwater feeding the springs, the initial distribution of salinities along the valley and particularly, the inflow-paths of the brines, have never been understood but were assumed to be fault-controlled. The interpretation of seismic profiles and analysis of gravity anomalies revealed the subsurface structure of the valley and namely the occurrence of a dense network of faults which branch out from those delineating the Jordan-Dead Sea Rift. The faults formed a series of uplifted and down-warped horst-and-graben structures. By joint analysis of structural, hydrological and geochemical evidence, it occurs that groundwater flow-paths leading to the springs emerging in the middle of the Bet She’an Valley are determined by structural elements such as major faults and fault-controlled structures. The penetration of the pressurized Ca-chloride Rift brines and their inflow into fresh groundwater bodies occurs prevalently along the faults outlining the western margins of the Dead Sea Rift Valley and at their intersection with outbranching NW–SE-striking faults.  相似文献   

5.
《Quaternary Science Reviews》2007,26(17-18):2219-2228
Lakes Samra, Lisan and the Dead Sea occupied the Dead Sea basin during the Last Interglacial (∼140–75 ka BP), last glacial (∼70–14 ka BP) and Holocene periods, respectively. The age of Lake Lisan and Samra was determined by U–Th dating of primary aragonites comprising parts of the lacustrine sedimentary sequences. The lakes have periodically deposited sequences of layered calcitic marls (Lake Samra) or laminated primary aragonite (Lake Lisan). The deposition of aragonite as the primary carbonate phase reflects the contribution of the incoming freshwater (loaded with bi-carbonate) and high Mg-, Ca-chloride brine that originated from the subsurface vicinity of the Dead Sea basin. Deposition of calcitic marls suggests a minor effect of the brines. The Ca-chloride subsurface brine has been migrating in and out of the wall rocks of the Dead Sea basin, reflecting the regional hydrological conditions. During most of the last glacial period and during the late Holocene, sufficient precipitation above the Judea Mountains pushed the subsurface Ca-chloride brines into the lakes causing the deposition of aragonite. During the Last Interglacial period the rain that precipitated above the Judea Mountains was insufficient to induce brine flow toward Lake Samra. It appears that sporadic floods provided calcium, bicarbonate and detritus to produce the Samra calcitic marls. Travertines deposited at the Samra–Lisan boundary indicate the early stage in the resumption of groundwater (springs) activity that led to the resurgence of Ca-chloride brine and rise of Lake Lisan. Similar variations in the regional rain precipitation and hydrological activity probably characterized the long-term geochemical evolution of Pleistocene lacustrine water-bodies in the Dead Sea basin, enabling the use of the carbonates as paleo-hydrological monitors.  相似文献   

6.
Transient Electromagnetic (TEM), known also as Time Domain Electromagnetic (TDEM) and Magnetic Resonance Sounding (MRS) methods were applied jointly to investigate variations in lithology and groundwater salinity in the Nahal Hever South area (Dead Sea coast of Israel). The subsurface in this area is highly heterogeneous and composed of intercalated sand and clay layers over a salt formation, which is partly karstified. Groundwater is very saline, with a chloride concentration of 100–225 g/l. TEM is known as an efficient tool for investigating electrically conductive targets like saline water, but it is sensitive to both the salinity of groundwater and the porosity of rocks. MRS, however, is sensitive primarily to groundwater volume, but it also allows delineating of lithological variations in water-saturated formations. MRS is much less sensitive to variations in groundwater salinity in comparison with TEM. We show that MRS enables us to resolve the fundamental uncertainty in TEM interpretation caused by the equivalence between groundwater resistivity and lithology. Combining TEM and MRS, we found that the sandy Dead Sea aquifer filled with Dead Sea brine is characterized by a bulk resistivity of ρx > 0.4 Ωm, whereas zones with silt and clay in the subsurface are characterized by a bulk resistivity of ρx < 0.4 Ωm. These observations are confirmed by calibration of the TEM method performed near 18 boreholes.  相似文献   

7.
 A sediment core from the southern Dead Sea was analyzed using gamma spectroscopy as well as 210Pb dating in order to ascertain if any radioactive contamination could be detected and to determine the sedimentation rates in the area. Results of this study show no presence of man-made radionuclides in the area. Sedimentation rates were determined to be between 0.25 and 0.4 g/cm2/year. (∼0.5 cm/year), which is in line with what would be expected assuming carbonate layers are annual varves. Received: 31 January 1997 · Accepted: 11 March 1997  相似文献   

8.
 Sinkhole development along the western shore of the Dead Sea became a major concern in 1990 with the appearance of a series of holes 2–15 m diameter and up to 7 m deep in the Newe Zohar area. One of these sinkholes, below the asphalt surface of the main road along the western shore of the Dead Sea, was opened by a passing bus. Repeated infilling and collapse of these holes indicated the extent of this ongoing process and the significance of this developing hazard. Since then sinkholes have developed in other areas including Qalia, Ein Samar, Ein Gedi and Mineral Beach. Three main types of sinkholes have been recognized. Gravel holes occurring in alluvial fans, mud holes occurring in the intervening bays of clay deposits between fans and a combination of both types at the front of young alluvial fans where they overlap mud flats. Fossil, relict sinkholes have been observed in the channels of some old alluvial fans. Sinkhole development is directly related to the regression of the Dead Sea and the corresponding lowering of the regional water table. Continuation of this process widens the neritic zone enveloping the sea and increases the sinkhole hazard of the region. Received: 4 February 1999 · Accepted: 8 April 1999  相似文献   

9.
In this paper we describe the stratigraphy and sediments deposited in Lake Samra that occupied the Dead Sea basin between ∼ 135 and 75 ka. This information is combined with U/Th dating of primary aragonites in order to estimate a relative lake-level curve that serves as a regional paleohydrological monitor. The lake stood at an elevation of ∼ 340 m below mean sea level (MSL) during most of the last interglacial. This level is relatively higher than the average Holocene Dead Sea (∼ 400 ± 30 m below MSL). At ∼ 120 and ∼ 85 ka, Lake Samra rose to ∼ 320 m below MSL while it dropped to levels lower than ∼ 380 m below MSL at ∼ 135 and ∼ 75 ka, reflecting arid conditions in the drainage area. Lowstands are correlated with warm intervals in the Northern Hemisphere, while minor lake rises are probably related to cold episodes during MIS 5b and MIS 5d. Similar climate relationships are documented for the last glacial highstand Lake Lisan and the lowstand Holocene Dead Sea. Yet, the dominance of detrital calcites and precipitation of travertines in the Dead Sea basin during the last interglacial interval suggest intense pluvial conditions and possible contribution of southern sources of wetness to the region.  相似文献   

10.
Sabkhas are ubiquitous geomorphic features in eastern Saudi Arabia. Seven brine samples were taken from Sabkha Jayb Uwayyid in eastern Saudi Arabia. Brine chemistry, saturation state with respect to carbonate and evaporate minerals, and evaporation-driven geochemical reaction paths were investigated to delineate the origin of brines and the evolution of both brine chemistry and sabkha mineralogy. The average total dissolved solids in the sabkha brines is 243 g/l. The order of cation dominance is Na+   >>  Mg2+ >>  Ca2+>K+, while anion dominance is Cl− >> SO4 2− >> HCO3 −. Based on the chemical divide principle and observed ion ratios, it was concluded that sabkha brines have evolved from deep groundwater rather than from direct rainfall, runoff from the surroundings, or inflow of shallow groundwater. Aqueous speciation simulations show that: (1) all seven brines are supersaturated with respect to calcite, dolomite, and magnesite and undersaturated with respect to halite; (2) three brines are undersaturated with respect to both gypsum and anhydrite, while three brines are supersaturated with respect to both minerals; (3) anhydrite is a more stable solid phase than gypsum in four brines. Evaporation factors required to bring the brines to the halite phase boundary ranged from 1.016 to 4.53. All reaction paths to the halite phase boundary follow the neutral path as CO2 is degassed and dolomite precipitates from the brines. On average, a sabkha brine containing 1 kg of H2O precipitates 7.6 g of minerals along the reaction path to the halite phase boundary, of which 52% is anhydrite, 35.3% is gypsum, and 12.7% is dolomite. Bicarbonate is the limiting factor of dolomite precipitation, and sulfate is the limiting factor of gypsum and anhydrite precipitation from sabkha brines.  相似文献   

11.
The Ca–Mg relationship in groundwaters strongly points to the overall dolomitization and local albitization. The Mg/Ca ratios reveal two trends by which saline waters develop: increase of Mg/Ca ratio by evaporation and decreasing Mg/Ca ratios due to dolomitization and albitization. Br/Cl vs. Na/Cl ratios demonstrate that albitization does not play a major role which leaves dolomitization to be the main source for decreasing Mg/Ca ratios in saline waters. In the eastern and southern Region of Lake Kinneret, salinization occurs by mixing with a Ca/Mg molar ratio <1 brine (Ha’On type). Along the western shoreline of the Lake, a Ca/Mg > 1 dominates, which developed by the albitization of plagioclase in abundant mafic volcanics and the dolomitization of limestones. The most saline groundwater of the Tabgha-, Fuliya-, and Tiberias clusters could be regional derivatives of at least two mother brines: in diluted form one is represented by Ha’On water, the other is a Na-rich brine of the Zemah type. Additionally, a deep-seated Ca-dominant brine may ascend along the fractures on the western side of Lake Kinneret, which is absent on the eastern side. Groundwaters of the Lower Jordan Valley are chemically different on both sides of the Jordan River, indicating that the exchange of water is insignificant. All saline waters from the Dead Sea and its surroundings represent a complex mixture of brines, and precipitation and local dissolution of halite and gypsum. Many wells of the Arava/Araba Valley pump groundwater from the Upper Cretaceous limestone aquifer, the origin of the water is actually from the Lower Cretaceous Kurnub Group sandstones. Groundwater drawn from the Quaternary alluvial fill either originates from Kurnub Group sandstones (Eilat 108, Yaalon 117) or from altered limestones of the Judea Group. The origin of these waters is from floods flowing through wadis incised into calcareous formations of the Judea Group. On the other hand, as a result of step-faulting, hydraulic contact is locally established between the Kurnub- and the Judea Groups aquifers facilitating the inter-aquifer flow of the confined Kurnub paleowater into the karstic formations of the Judea Group. Two periods of Neogene brine formation are considered: the post-Messinan inland lagoon resulting in drying up of the Sdom Sea and the evaporation of the Pleistocene Samra Lake, which went further through the stage of Lake Lisan to the present Dead Sea. For the first period, major element hydrochemistry suggests that the saline waters and brines in the Jordan-Dead Sea–Arava Valley transform evolved from the gradual evaporation of an accumulating mixture of sea-, ground-, and surface water. Due to the precipitation of carbonates, gypsum, and halite, such an evaporating primary water body was strongly enriched in Mg, Br, and B and shows high molar ratios of Br/Cl, B/Cl, and Mg/Ca but low Na/Cl ratios. The development of the Br/Cl ratio is chemically modelled, showing that indeed brine development is explicable that way. Along with the evaporation brine, evaporites formed which are leached by infiltrating fresh water yielding secondary brines with Na/Cl ratios of 1. When primary brines infiltrated the sub-surface, they were subjected to Mg–Ca exchange in limestones (dolomitization) and to chloritization and albitization in basic igneous rocks turning them into Ca-Cl brines. These tertiary brines are omnipresent in the Rift. The brines of the late Lisan and Dead Sea were generated by evaporating drainage waters, which leached halite, gypsum, and carbonates from the soil and from the sub-surface. All these brines are still being flushed out by meteoric water, resulting in saline groundwaters. This flushing is regionally enhanced by intensive groundwater exploitation. In variable proportions, the Neogene and late Lisan Lake and Recent Dead Sea brines have to be considered as the most serious sources of salinization of groundwaters in the Rift. Deep-seated pre-Sdom brines cannot strictly be excluded, but if active they play a negligible role only. An erratum to this article can be found at  相似文献   

12.
This paper deals with the hydrogeological relationship between base levels of saline lakes and the formation of sub-horizontal caves. The mechanism presented here suggests that many horizontal cave levels in carbonate sequences are created adjacent to the saline lakes shorelines because of the converging of the groundwater flow above the fresh–saline water interface. The main factors that control enhanced carbonate dissolution and cave formation are high groundwater flow velocities in the shallow phreatic zone during a relative long steady state of the water table. High groundwater flow velocities are evident close to the Dead Sea due to the convergent fast flows above the shallow interface adjacent to the shoreline. The same could prevail in the case of previous paleo-lakes that existed in the basin. The synergetic combination of the above preconditions for enhanced cave formation seems to be responsible for the formation of elevation-controlled alignment of paleo-near shore cave levels in the central and southern (Dead Sea) portion of the study area. These are found on the western fault escarpment and basin margin in different stratigraphic horizons of carbonate lithology. Many of the cave levels can be linked to late Quaternary–Holocene lake levels obtained from dated lake sediments within the basin. The most common cave’s elevation was found to be around 200 m below sea level which was the elevation of the Lisan Lake during part of its history. On the other hand, the Hula Basin in the northern part of the Dead Sea Basin was not occupied by saline water bodies since its formation as a base level, and thus the above preconditions for enhanced cave formation did not prevail. Indeed, this is evident by the lack of horizontal cave levels on its western carbonate margins unlike the situation in the south.  相似文献   

13.
The freshwater Lake Kinneret (Sea of Galilee) and the hypersaline Dead Sea are remnant lakes, evolved from ancient water bodies that filled the tectonic depressions along the Dead Sea Transform (DST) during the Neogene-Quartenary periods. We reconstructed the limnological history (level and composition) of Lake Kinneret during the past ∼40,000 years and compared it with the history of the contemporaneous Lake Lisan from the aspect of the regional and global climate history. The lake level reconstruction was achieved through a chronological and sedimentological investigation of exposed sedimentary sections in the Kinnarot basin trenches and cores drilled at the Ohalo II archeological site. Shoreline chronology was established by radiocarbon dating of organic remains and of Melanopsis shells.The major changes in Lake Kinneret level were synchronous with those of the southern Lake Lisan. Both lakes dropped significantly ∼42,000, ∼30,000, 23,800, and 13,000 yr ago and rose ∼39,000, 26,000, 5000, and 1600 yr ago. Between 26,000 and 24,000 yr ago, the lakes merged into a unified water body and lake level achieved its maximum stand of ∼170 m below mean sea level (m bsl). Nevertheless, the fresh and saline water properties of Lake Kinneret and Lake Lisan, respectively, have been preserved throughout the 40,000 years studied. Calcium carbonate was always deposited as calcite in Lake Kinneret and as aragonite in Lake Lisan-Dead Sea, indicating that the Dead Sea brine (which supports aragonite production) never reached or affected Lake Kinneret, even during the period of lake high stand and convergence. The synchronous level fluctuation of lakes Kinneret, Lisan, and the Holocene Dead Sea is consistent with the dominance of the Atlantic-Mediterranean rain system on the catchment of the basin and the regional hydrology. The major drops in Lake Kinneret-Lisan levels coincide with the timing of cold spells in the North Atlantic that caused a shut down of rains in the East Mediterranean and the lakes drainage area.  相似文献   

14.
 A geophysical survey was conducted to determine the depth of the base of the water-table aquifer in the southern part of Jackson Hole, Wyoming, USA. Audio-magnetotellurics (AMT) measurements at 77 sites in the study area yielded electrical-resistivity logs of the subsurface, and these were used to infer lithologic changes with depth. A 100–600 ohm-m geoelectric layer, designated the Jackson aquifer, was used to represent surficial saturated, unconsolidated deposits of Quaternary age. The median depth of the base of the Jackson aquifer is estimated to be 200 ft (61 m), based on 62 sites that had sufficient resistivity data. AMT-measured values were kriged to predict the depth to the base of the aquifer throughout the southern part of Jackson Hole. Contour maps of the kriging predictions indicate that the depth of the base of the Jackson aquifer is shallow in the central part of the study area near the East and West Gros Ventre Buttes, deeper in the west near the Teton fault system, and shallow at the southern edge of Jackson Hole. Predicted, contoured depths range from 100 ft (30 m) in the south, near the confluences of Spring Creek and Flat Creek with the Snake River, to 700 ft (210 m) in the west, near the town of Wilson, Wyoming. Received, May 1997 · Revised, February 1998 · Accepted, April 1998  相似文献   

15.
The Profitis Ilias gold deposit, located on the western part of Milos Island, Greece, is the first epithermal gold deposit discovered in the Pliocene–Pleistocene Aegean volcanic arc. Estimated ore reserves are 5 million tonnes grading 4.4 g/tonne Au and 43 g/tonne Ag. The deposit is closely associated with a horst and graben structure, and occurs in a series of steep interconnected crustiform-banded quartz veins up to 3 m wide, extending to depths of at least 300 m. The mineralisation occurs in three stages and is hosted by 3.5–2.5 Ma old silicified and sericitised rhyolitic lapilli-tuffs and ignimbrites. It consists of pyrite, galena, chalcopyrite, electrum and native gold. Additionally, adularia occurs with quartz mainly in veins. Homogenisation temperatures of primary liquid-rich inclusions vary from 145 to 399 °C for the ore stage, and 112 to 263 °C for the post-ore stage. Salinities range between 0.1 and 11.4 wt% NaCl equiv. and 0.93 to 8.5 wt% NaCl equiv. for the ore stage and the post-ore stage, respectively. Rare vapour-rich inclusions in ore stage quartz homogenise between 368 and 399 °C and estimates of eutectic melting (−25 to −38 °C) indicate the presence of Ca and Mg in the ore fluids. Sample elevation versus fluid inclusion Th–salinity relationships show (1) a high-salinity trend, where moderate-temperature (300–250 °C) and moderate-salinity brines (∼3 wt% NaCl equiv.) trend to high-salinity (up to 15 wt% NaCl equiv.) fluids with lower (∼25–50 °C) homogenisation temperatures, and (2) a high-Th trend where moderate-salinity and moderate-temperature brines (200–250 °C; 3 wt% NaCl equiv.) develop into low-salinity (<1 wt% NaCl equiv.), high-temperature (>350 °C) fluids. These trends are best explained by extreme boiling and vapourisation phenomena between 200 and 250 °C. The 430–450 m asl (metres above sea level) level marks the transition between a lower liquid-dominated segment of the system where only the steep high-salinity trend is seen, and an upper vapour-dominated segment where the high-Th trend or a combination of both are seen. There is a close spatial association between mineable gold grades and the upper segment of the system. Depth-to-boiling curves suggest that the paleo-surface was ∼200 m above the present summit of Profitis Ilias. Comparison of the mineralisation and fluid geochemistry at Profitis Ilias with that of the nearby modern geothermal system indicates that the processes of metal mineralisation have probably been continuous since the Late Pliocene. Received: 24 February 2000 / Accepted: 15 July 2000  相似文献   

16.
 Two test cases from Israel are presented herein employing the decay rate of radon along the flow path to assess groundwater flow velocities. Groundwater flow reaching the fault zone emerges in several places along the rift fault zone as thermal springs because of deep water confinement. The high water temperature of the surface is indicative of high vertical flow velocities, which maintains the original high temperatures. Knowing the Rn content at a source point and at a given down-gradient, and assuming no Rn addition from the water itself or along the flow path, one can calculate the flow velocity based on the Rn half-life time. The decay of Rn in western Galilee was found to be ∼570–150 pCi/l, and in the Dead Sea area from 5000–2000 pCi/l along a respective flow path of 1000 and 200 m, Based on the above, the calculated flow velocities were compared with those obtained from pumping tests in the study area. The method is applicable, because of the short Rn half-life, to cases of high Rn contents, short distances and high flow velocities. Received: 18 January 2000 · Accepted: 21 March 2000  相似文献   

17.
 Intensive application of surface water in command areas of irrigation projects is creating water logging problems, and the increase of groundwater usage in agriculture, industry and domestic purposes (through indiscriminate sinking of wells) is causing continuous depletion of water levels, drying up of wells and quality problems. Thus the protect aquifers to yield water continuously at economical cost, the management of water resources is essential. Integrated geological, hydrological (surface and groundwater) and geochemical aspects have been studied for the development and management of water resources in drought-prone Cuddapah district. The main lithological units are crystallines, quartzites, shales and limestones. About 91 000 ha of land in the Cuddapah district is irrigated by canal water. A registered ayacut of about 47 000 ha is irrigated by 1368 minor irrigation tanks. A total of 503 spring channels are identified in the entire district originating from the rivers/streams, which has the capacity of irrigating about 8700 ha. The average seasonal rise in groundwater level is 7.32 m in quartzites, 5.35 m in crystallines, 3.82 m in shales, 2.50 m in limestones and 2.11 m in alluvium. Large quantities of groundwater are available in the mining areas which can be utilised and managed properly by the irrigation department/cultivators for the irrigation practices. Groundwater assessment studies revealed that 584 million m3 of groundwater is available for future irrigation in the district. From the chemical analysis, the quality of groundwater in various rock units is within the permissible limits for irrigation and domestic purposes, but at a few places the specific conductance, chloride and fluoride contents are high. This may be due to untreated effluents, improper drainage system and/or the application of fertilisers. Received: 10 June 1998 · Accepted: 15 November 1998  相似文献   

18.
 Understanding the geologic controls of porosity development and their relationship to the karst aquifer system in the Cambrian Maynardville Limestone is important in determining possible contaminant transport pathways and provides essential data for hydrologic models within the Oak Ridge Reservation of east Tennessee. In the Maynardville Limestone, several important factors control porosity development: (1) lithologic controls on secondary microporosity and mesoporosity are related to dissolution of evaporite minerals and dedolomitization in supratidal facies; (2) depth below the ground surface controls the formation of karst features because the most active portion of the groundwater system is at shallow depths, and karst features are rare below ≈35 m; and (3) structural controls are related to solution enlargement of fractures and faults. Received: 21 May 1996 · Accepted: 30 August 1996  相似文献   

19.
Mineralogically zoned and unzoned discordant bodies composed predominately of plagioclase with up to 35% olivine, occur at three different levels in Olivine-Bearing zones III and IV of the Middle Banded series of the Stillwater complex. The discordant bodies are elongate perpendicular to the layering of the host cumulates with slender concordant apophyses. Although the host olivine-gabbros are foliated with tabular plagioclase, the discordant bodies lack a discernible fabric and have blocky plagioclase. Average olivine in the host rocks is slightly more magnesian than that of the discordant bodies (Mg#75.8 ± 0.7 versus Mg#74.6 ± 0.3 respectively) but plagioclase compositions are indistinguishable (An77.6 ± 2.0 versus An76.6 ± 4.3– average host and discordant bodies respectively). Whole-rock major- and trace-element compositions of the discordant bodies are generally indistinguishable from cumulates with similar modal abundance. However, bulk compositions of anorthositic cores from the discordant bodies are enriched in K, Na, Ba, Sr and P. We conclude that the discordant bodies formed when cooler volatile fluids or fluid-rich silicate liquids moved upward and encountered a hotter undersaturated solid-plus-liquid assemblage. Continued liquid/fluid fluxing increased the permeability along the flow path and focused the flow, allowing the original bulk compositions to be modified and leaving plagioclase-rich troctolites and anorthosites. The shapes of the discordant bodies suggest that the cumulus pile had anisotropic permeability during late-stage liquid/fluid flow. Chemical and mineralogical evidence from other parts of Olivine-Bearing zones III and IV suggests that the processes that formed the discordant bodies may have influenced other cumulates. In fact, it appears that the same processes that formed the discordant bodies operated within an anorthositic layer, strongly modifying the chemistry of the rock but leaving no mineralogical or textural evidence. Received: 10 December 1996 / Accepted: 12 August 1997  相似文献   

20.
The city of Burdur, which is built on an alluvium aquifer, is located in one of the most seismically active zones in southwestern Turkey. The soil properties in the study site are characterized by unconsolidated and water-saturated sediments including silty, clayey and sandy units, and shallow groundwater level is the other characteristic of the site. Thus, the city is under soil liquefaction risk during a large earthquake. A resistivity survey including 189 vertical electrical sounding (VES) measurements was carried out in 2000 as part of a multi-disciplinary project aiming to investigate settlement properties in Burdur city and its vicinity. In the present study, the VES data acquired by using a Schlumberger array were re-processed with 1D and 2D inversion techniques to determine liquefaction potential in the study site. The results of some 1D interpretations were compared to the data from several wells drilled during the project. Also, the groundwater level map that was previously obtained by hydrological studies was extended toward north by using the resistivity data. 2D least-squares inversions were performed along nine VES profiles. This provided very useful information on vertical and horizontal extends of geologic units and water content in the subsurface. The study area is characterized by low resistivity distribution (<150 Ωm) originating from high fluid content in the subsurface. Lower resistivity (3–30 Ωm) is associated with the Quaternary and the Tertiary lacustrine sediments while relatively high resistivity (40–150 Ωm) is related to the Quaternary alluvial cone deposits. This study has also shown that the resistivity measurements are useful in the estimation of liquefaction risk in a site by providing information on the groundwater level and the fluid content in the subsurface. Based on this, we obtained a liquefaction hazard map for the study area. The liquefaction potential was classified by considering the resistivity distributions from 2D inversion of the VES profiles, the types of the sediments and the extended groundwater level map. According to this map, the study area was characterized by high liquefaction hazard risk.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号