首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 93 毫秒
1.
日本俯冲带与IBM俯冲带位于太平洋板块、菲律宾海板块和欧亚板块三者的交汇地带,是典型的"俯冲工厂"地区,具有重要的研究意义.本文利用震源分布资料与卫星重力数据对日本俯冲带与IBM俯冲带进行了研究.通过空间重力异常反映了俯冲带地区的区域构造形态,在此基础上基于艾利模式计算了均衡异常以反映地壳均衡特征.利用震源分布资料,分别从垂直俯冲带走向与沿俯冲带走向划定了横截剖面(cross-sections)进行了地震提取,讨论了俯冲带地区的Wadati-Benioff带形态特征,并借助于俯冲带地震等深线图直观描述了俯冲带的俯冲形态.在日本俯冲带与伊豆—小笠原俯冲带各选取了一条典型剖面进行了重力2.5D反演,研究了俯冲带地区的壳幔结构特征.研究结果表明,九州—帕劳海脊与IBM岛弧在均衡异常上存在差异,前者已逐渐趋向于地壳均衡.IBM的Wadati-Benioff带存在明显的南北差异,反映出伊豆—小笠原俯冲板片停留在了660km转换带中,而马里亚纳俯冲板片很可能垂直穿过了这一转换带,造成这种南北差异的原因与板块相对运动、岩石圈黏性和年龄差异以及俯冲板片的重力效应等因素有关.在IBM的中部和南部存在板片撕裂现象.日本俯冲带的俯冲洋壳密度随俯冲深度变化较小,洋幔存在一定程度的蛇纹岩化,地幔楔蛇纹岩化作用不典型,海沟处有一范围较小的含水畸变带;伊豆—小笠原俯冲带俯冲洋壳密度随深度增大而明显增大,洋幔蛇纹岩化程度较日本俯冲带低,地幔楔蛇纹岩化作用强烈,板块交汇处存在明显的蛇纹岩底辟.日本俯冲带与IBM俯冲带一线自北向南板片俯冲变陡,两侧板块耦合度降低,与俯冲带两侧的板块运动速率差异有关.  相似文献   

2.
Joint bulk-sound and shear tomography for Western Pacific subduction zones   总被引:7,自引:0,他引:7  
Detailed regional body wave tomographic inversion of the Western Pacific region has been performed using P and S travel times from common sources and receivers, with a joint inversion in terms of bulk-sound and shear wave-speed variations in the mantle. This technique allows the separation of the influence of bulk and shear moduli, and hence a more direct comparison with mineral physics information. The study region is parameterized with cells of side 0.5° to 2° and 19 layers to a depth of 1500 km, while the rest of the mantle was parameterized with 5×5° cells with 16 layers between the surface and the core–mantle boundary. A simultaneous inversion is made for regional and global structures to minimize the influence of surrounding structures on the regional image. A nested iterative inversion scheme is employed with local linearization and three-dimensional ray tracing through the successive model updates. The results of the regional tomographic inversion reveal the penetration of a subducted slab below the 660 km discontinuity at the Kurile–Kamchatka trench, while flattening of slabs above this depth is observed in the Japan and Izu–Bonin subduction zones on both the bulk-sound and shear wave-speed images. The penetration of a subducted slab down to a depth of at least 1200 km is seen below the southern part of the Bonin trench, Mariana, Philippine, and Java subduction zones. Fast shear wave-speed perturbations associated with the subducted slabs, down to the 410 km transition zone, are larger than the comparable bulk-sound perturbations for all these subduction zones except the Philippines. The bulk-sound signature for the subducted slab is more pronounced than for shear in the Philippines, Talaud, New Guinea, Solomon, and Tonga subduction zones, where penetration of the slab into the middle mantle is observed. Variation in the amplitude ratio between bulk-sound and shear wave-speed anomalies correlates well with the subduction parameters of the descending slab. Slabs younger than 90 Ma at the trench show bulk-sound dominance in the upper mantle, while older slabs have a stronger shear wave-speed signature. Spreading of the fast shear wave-speed zone between 800 and 1000 km is observed in the areas of deep subducted slab penetration, but has no comparable expression in the bulk-sound images. This high-velocity feature may reflect physical or chemical disequilibria introduced to the lower mantle by subducted slabs.  相似文献   

3.
A general set of 2-D equations for the conservation of mass and momentum of a two-phase system of melt in a deformable matrix is used to derive analytic solutions for the corner flow of a constant porosity melt-saturated porous medium. This solution is used to model the melt extraction processes at mid-ocean ridges and island arcs. The models indicate that flow of melt is controlled by pressure gradients induced by the Laplacian of the matrix velocity field and by the dimensionless percolation velocity which measures the relative contributions of buoyancy-driven flow to advection by the matrix. The models can account for many features of ridge and arc volcanism. Matrix corner flow at ridges causes melt to be drawn to the ridge axis enabling the extraction of small melt fractions from a wide melting zone while showing a narrow zone of volcanism at the surface. At subduction zones melts do not percolate vertically but are drawn to the junction of the upper plate and subducting slab by corner flow in the mantle wedge. For subduction zones, if the dimensionless percolation velocity is below a critical value, slab-derived fluids will be carried down by the matrix and cannot interact with the mantle wedge. The geochemistry of island arcs will be controlled by the geometry of melt streamlines. This model is consistent with geophysical and geochemical data from the Aleutian arc.  相似文献   

4.
南海东部的板块汇聚带是了解南海和菲律宾海晚中新世以来构造演化的一个重要窗口.针对这一区域地壳运动的研究,获得了该区内微块体的现时地壳运动特征及其动力机制,在此基础上结合俯冲板片形态和震源机制资料提出了该区晚中新世以来的板块汇聚作用特征.研究发现:晚中新世晚期,菲律宾海板块西缘在南、北部的西向运动均受到限制的情况下,位于中间区域的吕宋岛北部则由于其西侧相对自由而继续往NW方向运动.该过程中,菲律宾大断裂等汇聚带内部的走滑断裂对于协调不同块体之间的地壳运动速度差异有着重要作用.受南、北阻挡的影响,中间部分的西向运动速率呈现出中间大(吕宋岛北部)两端小的特征.因而北吕宋西侧的马尼拉海沟也以相对于南部更快的速率不断向NW迁移.然而俯冲的南海岩石圈受其下方SE向地幔流的影响,未能发生相应的俯冲板片后撤,而是在两板块之间的直接接触面形成强烈推挤并发生反向弯曲.结合这一板块作用特征认为,马尼拉海沟现今的构造形迹是在上述背景下北段多次向NW方向变迁形成的,而双火山弧的形成则主要是由菲律宾海板块在吕宋岛弧南、北部的西向运动速率差异引起的.  相似文献   

5.
New inductively coupled plasma mass spectrometry (ICP-MS) trace element data are presented on a suite of arc lavas from the northern Mariana and southern Bonin island arcs. The samples were dredged from seamounts in the Central Island Province (CIP), the Northern Seamount Province (NSP) and the Volcano Arc (VA), and they range in composition from low-K tholeiites to shoshonites. Previous studies on these samples concluded that the primary compositional control was two-component mixing between a fluid-metasomatized mid-ocean ridge basalt (MORB) source and an enriched, ocean island basalt (OIB)-like, mantle component, with subducted sediment material playing a secondary role. However, the new trace element data suggest that the compositional variations along the Mariana arc can be better explained by the addition of spatially varying subduction components to a spatially varying mantle source. The data suggest that the subduction component in the CIP and VA is dominated by aqueous fluids derived from altered oceanic crust and a pelagic sediment component, while the subduction component in the NSP is dominated by more silicic fluids derived from volcanogenic sediments as well as from pelagic sediment and altered oceanic crust. The mantle wedge in the CIP and VA is depleted relative to a normal mid-ocean ridge basalt source by loss of a small melt fraction, while the mantle wedge in the NSP is enriched either by possible gain of a small melt fraction or addition of a sediment-derived melt. Because the subduction of seamounts controls the arc and back-arc geometries, so the concomitant variation between subducted material and mantle composition may be no coincidence. The high field strength element (HFSE) data indicate a high degree of melting (∼ 25–30%) throughout the arc, ∼ 10% of which may be attributed to decompression and ∼ 20% to fluid addition.  相似文献   

6.
俯冲板片形貌特征和活动大陆边缘演化体制的关系   总被引:7,自引:1,他引:7  
当大洋板块向大陆板块下俯冲时,上覆板块的边缘可以以沟—弧—盆体制发育,也可以不发育弧后拉伸盆地.为什么同属上覆板块边缘但可以这二种完全不同的体制演化是现代地球科学研究的一个热点.本文在查阅大量最新文献的基础上认为造成这二种不同演化体制除了与俯冲作用的年代学特征有关外还可能主要与俯冲板片的形貌不同所导致局部地幔对流方式不一有关.由于俯冲的倾角,俯冲达到的最大深度以及俯冲板片在670km上下地幔过渡带处保存的形态等因素不同,造成仰冲板块边缘之下软流圈对流方式不一.从而,造成弧体近陆一侧是否将发生岩石圈拉伸的动力学过程.  相似文献   

7.
PeterD.  Clift & Jongman  Lee 《Island Arc》1998,7(3):496-512
The sedimentary sequences that accumulate around volcanic arcs may be used to reconstruct the history of volcanism provided the degree of along-margin sediment transport is modest, and that reworking of old sedimentary or volcanic sequences does not contribute substantially to the sediment record. In the Mariana arc, the rare earth and trace element compositions of ash layers sampled by Deep Sea Drilling Project (DSDP) site 451 on the West Mariana Ridge, and sites 458 and 459 on the Mariana Forearc, were used to reconstruct the evolution of the arc volcanic front during rifting of the Mariana Trough. Ion microprobe analysis of individual glass shards from the sediments shows that the glasses have slightly light rare earth element (LREE)-enriched compositions, and trace element compositions typical of arc tholeiites. The B/Be ratio is a measure of the involvement of subducted sediment in petrogenesis, and is unaffected by fractional crystallization. This ratio is variable over the period of rifting, increasing up-section at site 451 and reaching a maximum in sediments dated at 3–4 Ma, ∼ 3–4 million years after rifting began. This may reflect increased sediment subduction during early rifting and roll-back of the Pacific lithosphere. Parallel trends are not seen in the enrichment of incompatible high field strength (HFSE), large ion lithophile (LILE) or rare earth elements (REE), suggesting that flux from the subducting slab alone does not control the degree of melting. Re-establishment of arc volcanism on the trench side of the basin at ca 3 Ma resulted in volcanism with relative enrichment in incompatible REE, HFSE and LILE, although these became more depleted with time, possibly due to melt extraction from the mantle source as it passed under the developing back-arc spreading axis, prior to melting under the volcanic front.  相似文献   

8.
Tomographic images of mantle structure beneath the region north and northeast of Australia show a number of anomalously fast regions. These are interpreted using a recent plate tectonic reconstruction in terms of current and former subduction systems. Several strong anomalies are related to current subduction. The inferred slab lengths and positions are consistent with Neogene subduction beneath the New Britain and Halmahera arcs, and at the Tonga and the New Hebrides trenches where there has been rapid rollback of subduction hinges since about 10 Ma. There are several deeper flat-lying anomalies which are not related to present subduction and we interpret them as former subduction zones overridden by Australia since 25 Ma. Beneath the Bird’s Head and Arafura Sea is an anomaly interpreted to be due to north-dipping subduction beneath the Philippines-Halmahera arc between 45 and 25 Ma. A very large anomaly extending from the Papuan peninsula to the New Hebrides, and from the Solomon Islands to the east Australian margin, is interpreted to be the remnant of south-dipping subduction beneath the Melanesian arc between 45 and 25 Ma. This interpretation implies that a flat-lying slab can survive for many tens of millions of years at the bottom of the upper mantle. In the lower mantle there is a huge anomaly beneath the Gulf of Carpentaria and east Papua New Guinea. This is located above the position where the tectonic model interprets a change in polarity of subduction from north-dipping to south-dipping between 45 and 25 Ma. We suggest this deep anomaly may be a slab subducted beneath eastern Australian during the Cretaceous, or subducted north of Australia during the Cenozoic before 45 Ma. The tomography also supports the tectonic interpretation which suggests little Neogene subduction beneath western New Guinea since no slab is imaged south of the New Guinea trench. However, one subduction zone in the tectonic model and many others, that associated with the Trobriand trough east of Papua New Guinea and the Miocene Maramuni arc, is not seen in the tomographic images and may require reconsideration of currently accepted tectonic interpretations.  相似文献   

9.
The top of the olivine-spinel phase change in subducted oceanic lithosphere can be located by the travel times of seismic waves which have propagated through the slab. P-wave travel-time residuals from deep earthquakes in the Tonga island are observed at Australian seismic stations are grouped according to the depth of the earthquake. The change in mean residual with a change in earthquake depth is related to the velocity contrast between slab and normal mantle at that depth. The curve mean residual versus earthquake depth displays a region of markedly increased slope between earthquake depths of about 250 and 350 km. The most probable explanation of this observation is an elevation by 100 km of the olivine-spinel phase change within the relatively cooler slab. No evidence was found for vertical displacements within the slab of any deeper phase changes.A temperature contrast between slab and normal mantle of about 1,000°C at 250 km depth is implied. This finding confirms current thermal models for subducted lithosphere but is inconsistent with the global intraplate stress field unless only a few percent of the negative buoyancy force at subduction zones is transmitted to the surface plates.  相似文献   

10.
Subduction-zone peridotites and their records of crust-mantle interaction   总被引:1,自引:0,他引:1  
Subduction is the core process of plate tectonics. The mantle wedge in subduction-zone systems represents a key tectonic unit, playing a significant role in material cycling and energy exchange between Earth's layers. This study summarizes research progresses in terms of subduction-related peridotite massifs, including supra-subduction zone(SSZ) ophiolites and mantle-wedge-type(MWT) orogenic peridotites. We also provide the relevant key scientific questions that need be solved in the future. The mantle sections of SSZ ophiolites and MWT orogenic peridotites represent the mantle fragments from oceanic and continental lithosphere in subduction zones, respectively. They are essential targets to study the crust-mantle interaction in subduction zones. The nature of this interaction is the complex chemical exchanges between the subducting slab and the mantle wedge under the major control of physical processes. The SSZ ophiolites can record melt/fluid-rock interaction, metamorphism,deformation, concentration of metallogenic elements and material exchange between crust and mantle, during the stages from the generation of oceanic lithosphere at spreading centers to the initiation, development, maturation and ending of oceanic subduction at continental margins. The MWT orogenic peridotites reveal the history of strong metamorphism and deformation during subduction, the multiple melt/fluid metasomatism(including silicatic melts, carbonatitic melts and silicate-bearing C-HO fluids/supercritical fluids), and the complex cycling of crust-mantle materials, during the subduction/collision and exhumation of continental plates. In order to further reveal the crust-mantle interaction using subduction-zone peridotites, it is necessary to utilize high-spatial-resolution and high-precision techniques to constrain the complex chemical metasomatism, metamorphism,deformation at micro scales, and to reveal their connections with spatial-temporal evolution in macro-scale tectonics.  相似文献   

11.
The mechanism by which high-pressure metamorphosed continental material is emplaced at high structural levels is a major unsolved problem of collisional orogenesis. We suggest that the emplacement results from partial subduction of the continental margin which, because of its high flexural rigidity, produces a rapid change in the trajectory of the descending slab. We assume a two-fold increase in effective elastic thickness of the lithosphere as the continental margin approaches the subduction zone, and calculate the flexural profile of a thin plate for progressive downward migration of the zone of increased rigidity. We assess the effect of changes in the flexural profile on the overlying accretionary prism and mantle wedge as the continent approaches by estimating the extra stresses that are imposed on the wedge due to the bending moment exerted by the continental part of the plate. The wedges overlying the subduction zones, and the subducting slab itself, experience substantial extra compressional stress at depths of around 100 km, and extensional stress at shallower depths, as the continental margin passes through the zone of maximum curvature. The magnitudes of such extra stresses are probably adequate to effect significant deformation of the wedge and/or the descending plate, and are experienced in a time interval of less than 5 m.y. for typical subduction rates. The spatial variation of yield stresses in the region of the wedge and descending slab indicates that much of this deformation may be taken up in the crustal part of the descending slab, which is the weakest region in the deeper parts of the subduction zone. This may result in rapid upward migration of the crust of the partially subducted continental margin, against the flow of subduction. High-pressure metamorphosed terranes emplaced by the mechanism envisaged in this paper would be bounded by thrust faults below and normal faults above. Movement on the faults would have been coeval, and would have resulted in rapid unroofing of the high-pressure terranes, synchronous with arrival of the continental margin at the subduction zone and, therefore, relatively early in the history of a collisional orogen.  相似文献   

12.
The Aeolian volcanic arc displays a wide range of magmatic products. Mafic lavas range from hypersthene normative calc-alkaline basalts to silica-undersaturated potassic absarokites, although the former are spatially and temporally dominant, consistent with the subduction-zone tectonic setting. In addition, intermediate and acidic members of the various fractionation series may be recognised. Large variations in trace element and isotope ratios accompany the rapid calc-alkaline to potassic transition, and it is argued that these may be largely explained in terms of subduction-zone mantle enrichment involving components derived from both basaltic ocean crust and subducted sediments. In addition, it seems that the mantle wedge itself was substantially heterogeneous prior to the onset of subduction zone processes. Not only are these subduction components similar to those proposed in a number of island arcs, but they also resemble those recognised in the ultra-potassic lavas of the Roman province, supporting recent subduction-related petrogenetic models of the Roman magmatism. Although subducted sediment plays an important role in the generation of some potassic magmatism, it is not uniquely responsible for K2O-rich lavas, which are also produced without a large sediment contribution.  相似文献   

13.
Back-arc basin basalt systematics   总被引:7,自引:0,他引:7  
The Mariana, east Scotia, Lau, and Manus back-arc basins (BABs) have spreading rates that vary from slow (<50 mm/yr) to fast (>100 mm/yr) and extension axes located from 10 to 400 km behind their island arcs. Axial lava compositions from these BABs indicate melting of mid-ocean ridge basalt (MORB)-like sources in proportion to the amount added of previously depleted, water-rich, arc-like components. The arc-like end-members are characterized by low Na, Ti and Fe, and by high H2O and Ba/La; the MORB-like end-members have the opposite traits. Comparisons between basins show that the least hydrous compositions follow global MORB systematics and an inverse correlation between Na8 and Fe8. This is interpreted as a positive correlation between the average degree and pressure of mantle melting that reflects regional variations in mantle potential temperatures (Lau/Manus hotter than Mariana/Scotia). This interpretation accords with numerical model predictions that faster subduction-induced advection will maintain a hotter mantle wedge. The primary compositional trends within each BAB (a positive correlation between Fe8, Na8 and Ti8, and their inverse correlation with H2O(8) and Ba/La) are controlled by variations in water content, melt extraction, and enrichments imposed by slab and mantle wedge processes. Systematic axial depth (as a proxy for crustal production) variations with distance from the island arc indicate that compositional controls on melting dominate over spreading rate. Hydrous fluxing enhances decompression melting, allowing depleted mantle sources just behind the island arc to melt extensively, producing shallow spreading axes. Flow of enriched mantle components around the ends of slabs may augment this process in transform-bounded back-arcs such as the east Scotia Basin. The re-circulation (by mantle wedge corner flow) to the spreading axes of mantle previously depleted by both arc and spreading melt extraction can explain the greater depths and thinner crust of the East Lau Spreading Center, Manus Southern Rifts, and Mariana Trough and the very depleted lavas of east Scotia segments E8/E9. The crust becomes mid-ocean ridge (MOR)-like where the spreading axes, further away from the island arc and subducted slab, entrain dominantly fertile mantle.  相似文献   

14.
西太平洋俯冲带的研究及其动力学意义   总被引:42,自引:13,他引:42       下载免费PDF全文
讨论了西太平洋俯冲带的分布及特征、西太平洋Wadati-Benioff带的形态及俯冲带上的应力状态及太平洋板块、菲律宾海板块与欧亚板块之间的相互作用;总结了地震层析成像结果;计算了俯冲板块在地幔中引起的P波速度异常,提出了俯冲板块与660km间断面相互作用的4种可能;研究了俯冲板块物理性质的变化、俯冲板块产生的负浮力及其影响因素;提出需要开展俯冲带对东亚大陆构造运动和演化的影响、俯冲带相互关系及演化的研究.  相似文献   

15.
汕头-吕宋岛岩石圈速度结构剖面,划分出华南陆缘古生代陆壳、陆架区晚古生代-中生代陆壳、陆坡带中生代-早第三纪过渡壳、新生代南海海盆洋壳及吕宋岛中生代-新生代岛弧陆壳与东吕宋海槽洋壳等地壳构造组分,并确定了上述地壳构造之间的边界断裂构造及其性质。结合地震震源分布及机制,初步确定了华南陆架盆岭构造带北、南两侧地震构造的控震构造与发震构造性质及其震源力学特征;1)指出1994年9月16日台湾浅滩7.3级地震属于板缘壳幔地震及造成一千公里有感范围的原因;2)马尼拉海沟的海底地堑构造与南海海盆岩石圈地幔上隆是马尼拉海沟俯冲带震源显示正断层性质的原因,且为被动的或转换俯冲带;3)东吕宋海槽仍属于菲律宾海俯冲带性质;吕宋岛东西两侧俯冲带岩石圈板片震源深度的准三层分布,可能表明俯冲带岩石圈板片存在相应的低速滑移层。  相似文献   

16.
Analytical results of the relative and absolute abundance of LIL-incompatible trace elements (K, Rb, Cs, Sr, and Ba) and isotopic compositions ( , , and ) are summarized for fresh samples from active and dormant volcanoes of the Volcano and Mariana island arcs. The presence of thickened oceanic crust (T 15–20 km) beneath the arc indicates that while hybridization processes resulting in the modification of primitive magmas by anatectic mixing at shallow crustal levels cannot be neglected, the extent and effects of these processes on this arc's magmas are minimized. All components of the subducted plate disappear at the trench. This observation is used to reconstruct the composition of the crust in the Wadati-Benioff zone by estimating proportions of various lithologies in the crust of the subducted plate coupled with analyses from DSDP sites. Over 90% of the mass of the subducted crust consists of basaltic Layers II and III. Sediments and seamounts, containing the bulk of the incompatible elements, make up the rest. Bulk Western Pacific seafloor has , δ 18O +7.2, K/Rb 510, K/Ba 46, and K/Cs 13,500. Consideration of trace-element data and combined systematics limits the participation of sediments in magmagenesis to less than 1%, in accord with the earlier results of Pb-isotopic studies. Combined data indicate little, if any, involvement of altered basaltic seafloor in magmagenesis. Perhaps more important than mean isotopic and LIL-element ratios is the restricted range for lavas from along over 1000 km of this arc. Mixtures of mantle with either the subducted crust or derivative fluids should result in strong heterogeneities in the sources of individual volcanoes along the arc. Such heterogeneities would be due to: (1) gross variations of crustal materials supplied to the subduction zone; and (2) lesser efficiency of mixing processes accompanying induced convection between arc segments (parallel to the arc) as compared to that perpendicular to the arc. The absence of these heterogeneities indicates that either some process exists for the efficient mixing of mantle and subducted material parallel to the arc or that subducted materials play a negligible role in the generation of Mariana-Volcano arc melts.Consideration of plausible sources in the mantle indicates that (1) an unmodified MORB-like mantle cannot have generated the observed trace-element and isotopic composition of this arc's magmas, while (2) a mantle similar to that which has produced alkali-olivine basalts (AOB) of north Pacific “hot spot” chains is indistinguishable in many respects spects from the source of these arc lavas.  相似文献   

17.
There is general agreement that calc-alkaline volcanic rocks at convergent plate margins are genetically related to the process of subduction (Ringwood, 1974; Maaloe and Petersen, 1981; Hawkesworth et al., 1997). However, opinions on the mode and site of generation of primary magma for island arc volcanism differ substantially. The site of generation of calc-alkaline magma is thought to be either in the mantle wedge (Plank and Langmuir, 1988; McCulloch and Gamble, 1991) or in the subducting slab (White and Dupré, 1986; Defant and Drummond, 1990; Edwards et al., 1993; Ryan and Langmuir, 1993). We present seismological evidence in favour of the latter concept. A distinctive seismicity pattern around and under the Krakatau volcano was identified during systematic studies of the SE Asian convergent plate margins by means of global seismological data. A column-like cluster of events, probably associated with the dynamics of the volcano, is clearly separated from the events in the Wadati-Benioff zone. The accuracy of hypocentral determinations of the events of the cluster does not differ from the accuracy of the events belonging to the subducting slab. The depths of the cluster events vary from very shallow to about 100 km without any apparent discontinuity. On the other hand, there is a pronounced aseismic gap in the Wadati-Benioff zone directly beneath the volcano at depths between 100-150 km. The Krakatau cluster connects this aseismic gap to the volcano at the surface. The pervasive occurrence of earthquakes in the continental wedge between the subducting slab and the Earth surface bears witness to the brittle character of the continental lithosphere and casts doubt on the existence of large-scale melting of mantle material. The aseismic gap (Hanu and Vank, 1985), interpreted by us as a partially melted domain occurring in subducted slabs in practically all active subduction zones that reach depths greater than 100 km, is here used as evidence for the location of the primary source region of island arc volcanics in the subducting plate.  相似文献   

18.
The North China Craton (NCC) has been thinned from >200 km to <100 km in its eastern part. The ancient subcontinental lithospheric mantle (SCLM) has been replaced by the juvenile SCLM in the Meoszoic. During this period, the NCC was destructed as indicated by extensive magmatism in the Early Cretaceous. While there is a consensus on the thinning and destruction of cratonic lithosphere in North China, it has been hotly debated about the mechanism of cartonic destruction. This study attempts to provide a resolution to current debates in the view of Mesozoic mafic magmatism in North China. We made a compilation of geochemical data available for Mesozoic mafic igneous rocks in the NCC. The results indicate that these mafic igneous rocks can be categorized into two series, manifesting a dramatic change in the nature of mantle sources at ~121 Ma. Mafic igneous rocks emplaced at this age start to show both oceanic island basalts (OIB)-like trace element distribution patterns and depleted to weakly enriched Sr-Nd isotope compositions. In contrast, mafic igneous rocks emplaced before and after this age exhibit both island arc basalts (IAB)-like trace element distribution patterns and enriched Sr-Nd isotope compositions. This difference indicates a geochemical mutation in the SCLM of North China at ~121 Ma. Although mafic magmatism also took place in the Late Triassic, it was related to exhumation of the deeply subducted South China continental crust because the subduction of Paleo-Pacific slab was not operated at that time. Paleo-Pacific slab started to subduct beneath the eastern margin of Eruasian continent since the Jurrasic. The subducting slab and its overlying SCLM wedge were coupled in the Jurassic, and slab dehydration resulted in hydration and weakening of the cratonic mantle. The mantle sources of ancient IAB-like mafic igneous rocks are a kind of ultramafic metasomatites that were generated by reaction of the cratonic mantle wedge peridotite not only with aqueous solutions derived from dehydration of the subducting Paleo-Pacific oceanic crust in the Jurassic but also with hydrous melts derived from partial melting of the subducting South China continental crust in the Triassic. On the other hand, the mantle sources of juvenile OIB-like mafic igneous rocks are also a kind of ultramafic metasomatites that were generated by reaction of the asthenospheric mantle underneath the North China lithosphere with hydrous felsic melts derived from partial melting of the subducting Paleo-Pacific oceanic crust. The subducting Paleo-Pacific slab became rollback at ~144 Ma. Afterwards the SCLM base was heated by laterally filled asthenospheric mantle, leading to thinning of the hydrated and weakened cratonic mantle. There was extensive bimodal magmatism at 130 to 120 Ma, marking intensive destruction of the cratonic lithosphere. Not only the ultramafic metasomatites in the lower part of the cratonic mantle wedge underwent partial melting to produce mafic igneous rocks showing negative εNd(t) values, depletion in Nb and Ta but enrichment in Pb, but also the lower continent crust overlying the cratonic mantle wedge was heated for extensive felsic magmatism. At the same time, the rollback slab surface was heated by the laterally filled asthenospheric mantle, resulting in partial melting of the previously dehydrated rocks beyond rutile stability on the slab surface. This produce still hydrous felsic melts, which metasomatized the overlying asthenospheric mantle peridotite to generate the ultramafic metasomatites that show positive εNd(t) values, no depletion or even enrichment in Nb and Ta but depletion in Pb. Partial melting of such metasomatites started at ~121 Ma, giving rise to the mafic igneous rocks with juvenile OIB-like geochemical signatures. In this context, the age of ~121 Ma may terminate replacement of the ancient SCLM by the juvenile SCLM in North China. Paleo-Pacific slab was not subducted to the mantle transition zone in the Mesozoic as revealed by modern seismic tomography, and it was subducted at a low angle since the Jurassic, like the subduction of Nazca Plate beneath American continent. This flat subduction would not only chemically metasomatize the cratonic mantle but also physically erode the cratonic mantle. Therefore, the interaction between Paleo-Pacific slab and the cratonic mantle is the first-order geodynamic mechanism for the thinning and destruction of cratonic lithosphere in North China.  相似文献   

19.
俯冲带的后撤与弧后扩张   总被引:12,自引:1,他引:12       下载免费PDF全文
西太平洋地壳年龄较老,因而岩石层较冷和比重较大,俯冲带的角度也较大,活动和成熟的弧后盆地则较多;条件与之相反的东太平洋弧后盆地则较少.本文探讨这种相关关系的力学成因,计算了俯冲板块诱生的弧后上涌地幔流动.计算表明,俯冲角度大及存在后撤俯冲时,有利于在弧后地区产生明显的上涌地幔流,这种深部热物质的上涌会导致弧后扩张.反之,年龄较轻的海洋地块较热和较轻,俯冲角度一般也较小,不易诱生上涌地幔物质流动和弧后扩张.大陆地壳密度小于地幔物质,大陆碰撞区就更不具备弧后扩张的条件.  相似文献   

20.
—We have obtained constraints on the strength and orientation of anisotropy in the mantle beneath the Tonga, southern Kuril, Japan, and Izu-Bonin subduction zones using shear-wave splitting in S phases from local earthquakes and in teleseismic core phases such as SKS. The observed splitting in all four subduction zones is consistent with a model in which the lower transition zone (520–660 km) and lower mantle are isotropic, and in which significant anisotropy occurs in the back-arc upper mantle. The upper transition zone (410–520 km) beneath the southern Kurils appears to contain weak anisotropy. The observed fast directions indicate that the geometry of back-arc strain in the upper mantle varies systematically across the western Pacific rim. Beneath Izu-Bonin and Tonga, fast directions are aligned with the azimuth of subducting Pacific plate motion and are parallel or sub-parallel to overriding plate extension. However, fast directions beneath the Japan Sea, western Honshu, and Sakhalin Island are highly oblique to subducting plate motion and parallel to present or past overriding plate shearing. Models of back-arc mantle flow that are driven by viscous coupling to local plate motions can reproduce the splitting observed in Tonga and Izu-Bonin, but further three-dimensional flow modeling is required to ascertain whether viscous plate coupling can explain the splitting observed in the southern Kurils and Japan. The fast directions in the southern Kurils and Japan may require strain in the back-arc mantle that is driven by regional or global patterns of mantle flow.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号