首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
In this paper, the hydrogeological parameters of a confined aquifer, such as transmissivity (T), storativity (S) and radius of influence (R), have been assessed using real groundwater level measurements recorded by a monitoring network, consisting of automated municipal water supply boreholes at Nea Moudania aquifer, Chalkidiki, Greece. Particularly, the paper focused on the correlation between the drawdown and the constant flow rate during pumping time. So the Cooper-Jacob and the recovery test method were applied in order to delineate if turbulent head losses occur, as well as the impact of incorrect measurements of the radial distance (r) in the accuracy of estimating S values. The results show that a) the occurrence of a linear correlation between s and Q indicates a negligible turbulent head loss in the pumping wells and thus a reasonable flow rate usage, b) the validity of storativity values could be compromised if the r value is not accurately measured, and c) recovery test method can be used as an indicator of residual drawdown (s’) caused by previous pumping cycles, when the straight line intersecting the logarithmic t/t’ axis has a value greater than 1.  相似文献   

2.
A mathematical model describing the constant pumping is developed for a partially penetrating well in a heterogeneous aquifer system. The Laplace‐domain solution for the model is derived by applying the Laplace transforms with respect to time and the finite Fourier cosine transforms with respect to vertical co‐ordinates. This solution is used to produce the curves of dimensionless drawdown versus dimensionless time to investigate the influences of the patch zone and well partial penetration on the drawdown distributions. The results show that the dimensionless drawdown depends on the hydraulic properties of the patch and formation zones. The effect of a partially penetrating well on the drawdown with a negative patch zone is larger than that with a positive patch zone. For a single‐zone aquifer case, neglecting the effect of a well radius will give significant error in estimating dimensionless drawdown, especially when dimensionless distance is small. The dimensionless drawdown curves for cases with and without considering the well radius approach the Hantush equation (Advances in Hydroscience. Academic Press: New York, 1964) at large time and/or large distance away from a test well. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

3.
A novel methodology is proposed to calculate transmissivity (T) and storage coefficient (S) in a confined aquifer, based on the Theis (1935) solution and using only the first derivative of the drawdown with respect to time. By analyzing the behavior of the third derivative of the drawdown with respect to the logarithm of time, it is apparent that the third derivative vanishes when the first derivative attains its peak value. Since the third log-derivative is zero if, and only if, the argument, u, of the Theis well function is equal to unity, this condition can be used to estimate T and S, knowing the time at which the first derivative reaches its peak, and so overcoming the problem of actually computing the third log-derivative, which is very unstable. The main characteristic of the proposed method is that it does not require long pumping tests, since T and S are calculated using only the early-time drawdown. The proposed method was verified with a synthetic, an experimental and a field pumping test showing its validity when applied to homogeneous media. Theis CV (1935) The relation between lowering the piezometric surface and the rate and duration of discharge of a well using groundwater storage. Trans Am Geophys Union 16(2):519–524  相似文献   

4.
The origin and movement of groundwater are the fundamental questions that address both the temporal and spatial aspects of ground water run and water supply related issues in hydrological systems. As groundwater flows through an aquifer, its composition and temperature may variation dependent on the aquifer condition through which it flows. Thus, hydrologic investigations can also provide useful information about the subsurface geology of a region. But because such studies investigate processes that follow under the Earth's shallow, obtaining the information necessary to answer these questions is not continuously easy. Springs, which discharge groundwater table directly, afford to study subsurface hydrogeological processes.The present study of estimation of aquifer factors such as transmissivity (T) and storativity (S) are vital for the evaluation of groundwater resources. There are several methods to estimate the accurate aquifer parameters (i.e. hydrograph analysis, pumping test, etc.). In initial days, these parameters are projected either by means of in-situ test or execution test on aquifer well samples carried in the laboratory. The simultaneous information on the hydraulic behavior of the well (borehole) that provides on this method, the reservoir and the reservoir boundaries, are important for efficient aquifer and well data management and analysis. The most common in-situ test is pumping test performed on wells, which involves the measurement of the fall and increase of groundwater level with respect to time. The alteration in groundwater level (drawdown/recovery) is caused due to pumping of water from the well. Theis (1935) was first to propose method to evaluate aquifer parameters from the pumping test on a bore well in a confined aquifer. It is essential to know the transmissivity (T = Kb, where b is the aquifer thickness; pumping flow rate, Q = TW (dh/dl) flow through an aquifer) and storativity (confined aquifer: S = bSs, unconfined: S = Sy), for the characterization of the aquifer parameters in an unknown area so as to predict the rate of drawdown of the groundwater table/potentiometric surface throughout the pumping test of an aquifer. The determination of aquifer's parameters is an important basis for groundwater resources evaluation, numerical simulation, development and protection as well as scientific management. For determining aquifer's parameters, pumping test is a main method. A case study shows that these techniques have been fast speed and high correctness. The results of parameter's determination are optimized so that it has important applied value for scientific research and geology engineering preparation.  相似文献   

5.
Global curve-fitting method (GCFM) is regarded as an effective approach in hydrogeological parameter estimation, as it integrates and uses pumping data and water recovery data of a transient pumping test for parameter estimation. The impacts of pumping duration on hydrogeological parameter estimation by GCFM were investigated in the present study using 2 in situ pumping tests and 24 simulated transient pumping tests. Empirical formulas for determining the optimal pumping duration were derived. The study results suggest that pumping duration will have impacts on the accuracy of hydrogeological parameter estimation. When pumping duration is longer than a certain period, relative errors of hydrogeological parameter estimation keep relatively stable within an acceptable limit. Therefore, it is unnecessary to continue the pumping for a very long time after the groundwater level has become stable. When the change rate of drawdown over time (γ) in an observation well located within a distance of 100 m to the pumping well reaches 0.134, the pumping can be stopped. If there are more than one observation wells in a pumping test, the smallest γ value should be selected to determine the optimal pumping duration. This research is meaningful in the instruction of pumping tests, and will reduce test costs greatly.  相似文献   

6.
Compensation pumping is used to alleviate deficiencies in streamflow discharge during dry seasons. Short-term groundwater pumping can use aquifer storage instead of catchment-zone water until the drawdown reaches the edge of the stream. The capacitance is a complex, dimensionless parameter of an aquifer system that defines the delayed effect on streamflow when there is groundwater pumping. This parameter is a function of aquifer hydraulic characteristics, pumping time, and distance between the well and stream edge; the latter can involve stream leakance and vertical leakance of an associated aquitard. Three typical hydraulic cases of combined water systems (major catchment-zone wells close to the stream and compensation pumping wells) were classified depending on their capacitance structure (i.e. the relationship between surface water and groundwater): (1) perfect hydraulic connection between the stream and aquifer; (2) imperfect hydraulic connection between the stream and aquifer; and (3) essentially imperfect hydraulic connection between the stream and the underlying confined aquifer. The impact of various hydraulic characteristics and engineering factors on stream depletion was examined by conceptual and numerical modeling. To predict the suitability and efficiency of a combined water system application, regression tests were undertaken on unit stream depletion and capacitance, and power dependencies were defined.  相似文献   

7.
An artificial neural network (ANN) model is proposed for the simultaneous determination of transmissivity and storativity distributions of a heterogeneous aquifer system. ANNs may be useful tools for parameter identification problems due to their ability to solve complex nonlinear problems. As an extension of previous study—Karahan H, Ayvaz MT (2006) Forecasting aquifer parameters using artificial neural networks, J Porous Media 9(5):429–444—the performance of the proposed ANN model is tested on a two-dimensional hypothetical aquifer system for transient flow conditions. In the proposed ANN model, Cartesian coordinates of observation wells, associated piezometric heads and observation time are used as inputs while corresponding transmissivity and storativity values are used as outputs. The training, validation and testing processes of the ANN model are performed under two scenarios. In scenario 1, all the sampled data are used through the simulation time. However, in the scenario 2, there are data gaps due to irregular observations. By using the determined synaptic network weights, transmissivity and storativity distributions are predicted. In addition, the performance of the proposed ANN is tested for different noise data conditions. Results showed that the developed ANN model may be used in simultaneous aquifer parameter estimation problems.  相似文献   

8.
用水位恢复数据反演越流承压含水层参数   总被引：1，自引：0，他引：1  
杨建民  郑刚 《岩土力学》2008,29(6):1602-1606
水文地质勘测中,由于水位恢复阶段没有人力和机械因素干扰,由测量数据可以画出平滑的曲线,更适宜于分析水文地质参数,但经典非稳定流Theis公式和Theis水位恢复法所依据的若干假设条件在实际中难以满足。针对越流承压含水层具有补给条件而很快稳定以及非稳定抽水阶段流量常“抖动”的特点,论证了利用稳定流量和Hantush-Jacob越流模型计算的可行性,并用扩展的卡尔曼滤波器反演水文地质参数,经文献中历史数据和实地抽水试验检验结果表明,由该方法反演的预测值和实测值吻合良好。  相似文献   

9.
Transmissivity (T) is a basic hydraulic parameter of an aquifer that is utilized in most groundwater flow equations to understand the flow dynamics and is generally estimated from pumping tests. However, the cost of performing a large number of aquifer tests is expensive and time consuming. The fact that specific capacity (S c) is correlated with hydraulic flow properties of aquifers simplifies parameter estimation mainly because specific capacity values are more abundant in groundwater databases than values of transmissivity and they offer another approach to estimate hydraulic parameters of aquifers. In this study, an empirical relation is derived using 214 pairs of transmissivity and specific capacity values that are obtained from pumping tests conducted on water wells penetrating the complex volcanic aquifers of Upper Awash Basin, central Ethiopia. Linear and logarithmic regression functions have been performed and it is found that the logarithmic relationship predicting transmissivity from specific capacity data has a better correlation (R = 0.97) than the linear relationship (R = 0.79). The two parameters are log-normally distributed, in which the logarithmic relation is also better statistically justified than the linear relation. Geostatistical estimations of the transmissivity were made using different inputs and methods. Measured and supplemented transmissivity data obtained from estimates using the derived empirical relation were krigged and cokrigged, spherical and exponential models were fitted to the experimental variograms. The cross-validation results showed that the best estimation is provided using the kriging procedure, the transmissivity field represented by the measured transmissivity data and the experimental variogram fitted with the exponential model. Based on the geostatistical approach, the transmissivity map of the aquifer is produced, which will be used for groundwater flow modeling of the study area that will follow this analysis.  相似文献   

10.
Analyses are presented of long-term hydrographs perturbed by variable pumping/injection events in a confined aquifer at a municipal water-supply well field in the Region of Waterloo, Ontario (Canada). Such records are typically not considered for aquifer test analysis. Here, the water-level variations are fingerprinted to pumping/injection rate changes using the Theis model implemented in the WELLS code coupled with PEST. Analyses of these records yield a set of transmissivity (T) and storativity (S) estimates between each monitoring and production borehole. These individual estimates are found to poorly predict water-level variations at nearby monitoring boreholes not used in the calibration effort. On the other hand, the geometric means of the individual T and S estimates are similar to those obtained from previous pumping tests conducted at the same site and adequately predict water-level variations in other boreholes. The analyses reveal that long-term municipal water-level records are amenable to analyses using a simple analytical solution to estimate aquifer parameters. However, uniform parameters estimated with analytical solutions should be considered as first rough estimates. More accurate hydraulic parameters should be obtained by calibrating a three-dimensional numerical model that rigorously captures the complexities of the site with these data.  相似文献   

11.
Non-Darcian flow to a well in a leaky aquifer was investigated using a finite difference method. Flow in the leaky aquifer is assumed to be non-Darcian and horizontal, while flow in the aquitard is assumed to be Darcian and vertical. The Forchheimer equation was employed to describe the non-Darcian flow in the aquifer. The finite difference solution was compared with the solution of Birpinar and Sen (2004). The latter overestimates the drawdown at early times and underestimates the drawdown at late times; also, the impact of β D on the drawdown depends on the value of B D, where β D is a dimensionless turbulent factor in the Forchheimer equation and B D is the dimensionless leakage parameter. The impact of leakage on drawdown is similar to that of Darcian flow. A sensitivity analysis indicated that the drawdown is very sensitive to the change in the dimensionless well radius r cD when B D is relatively large, while it is sensitive to the change in B D when B D is relatively small. The numerical solution has been applied to analyze the pumping test data in Chaj-Doab area of Pakistan. Birpinar ME, Sen Z (2004) Forchheimer groundwater flow law type curves for leaky aquifers. J Hydrol Eng 9(1):51??9  相似文献   

12.
A radial collector well is used for the extraction of a large amount of groundwater without causing a deep drawdown at the well??s center, and it is appropriate for the supply of municipal water through riverbank filtration (RBF). Flow path changes caused by water extraction through a radial collector well were simulated to estimate the amount of river water induction at a RBF site associated with Nakdong River in South Korea. The structure of the screened horizontal arms of a radial collector well was examined with respect to effective riverbank filtration. The relative ratio of the river water induced to the radial collector well compared to the total groundwater extraction was estimated to be 27?C52%. The amount of induced river water varies with the distance of a horizontal arm from the river, indicating that the location and structure of the collector well is significant for RBF. In all simulation cases, the maximum drawdown of the groundwater level near the collector well was 2.1?m, which is not significant considering the substantial pumping rate at the study site. It was concluded that RBF radial collector wells can be used at the study site for a sustainable water supply.  相似文献   

13.
In this paper, fist-order reliability method (FORM) is used to evaluate the impacts of uncertainties posed by traditional deterministic models on the environment in Jining, China. Because of groundwater contamination in shallow aquifer, and an increase in water demand, the new wells target the confined aquifer with constant pumping rate of 5,000 m3/d. Using Theis equation, the groundwater drawdown is analyzed to determine whether the confined aquifer will be contaminated. Although the piezometric level is higher than the phreatic level by 11.0 m, the risk of drawdown is still 19.49% when the pumping rate of 5,000 m3/d is maintained for 2 years. The deterministic model indicates a drawdown of 8.94 m which is lower than the maximum tolerance drawdown of 11.0 m. The sensitivity and uncertainty analysis reveal that the model result is more sensitive to transmissivity than specific yield, while the reliability analysis offers significant information for the decision makers. This approach exposes and minimizes the risk of undesirable consequences such as groundwater contamination.  相似文献   

14.
Natural or artificial hydraulic connections between a granular aquifer in contact with a fractured-rock aquifer can have significant physical and chemical impacts at both a local and a regional scale. In this study, numerical simulations are conducted in order to illustrate the hydrogeological consequences of such hydraulic relationships. The numerical investigation, based on a conceptual model, focuses on the effects of the hydraulic connections when conducting a pumping test in a well that is set into a granular confined aquifer overlying a fractured-rock aquifer which presents a few fractures directly connected to the granular aquifer. It is illustrated that when interpreting the pumping test with the conventional methods consisting of plotting the drawdown versus time, a bias is introduced on the estimation of the transmissivity of the granular aquifer due to groundwater flowing from the fractured-rock aquifer via connecting fractures. However, it is underlined that plotting drawdown log-derivative versus time helps to diagnose the existence of these hydraulic relationships and therefore avoids committing a bias on the transmissivity estimation of the granular aquifer. Numerical simulation results also illustrate that hydraulic connections between the two aquifers can have significant impacts on the hydrogeochemical signature of the granular aquifer under investigation.  相似文献   

15.
为能同时分析含水层具有直线隔水边界条件下,抽水试验中抽水―恢复阶段降深数据,提出了一种新的数据分析方法。在建立这种方法时,将表示抽水和恢复阶段水头降深表达式中Theis井函数的级数表达式的前3项作为其近似表达式,经过推导,分别得到抽水和恢复2个阶段的直线方程。2个直线方程的因变量和自变量均为观测数据的函数,而直线常数为待求参数的函数,在进行数据分析时,只要将试验观测数据分别转化为直线方程的因变量和自变量数据,就能够利用一元线性回归法分别计算2个直线方程的常数,而利用直线常数的表达式,能够推导得到计算含水层参数和映射井到观测孔间距离的公式。通过算例说明了方法的具体应用步骤。   相似文献   

16.
Large diameter fully cased wells that gain water from the bottom are often dug in sandy and collapsible aquifers. They have cylindrical vertical walls lined with brick or concrete. The well bottom is partially filled with aquifer material through which the flow is vertically upward. When the vertical hydraulic gradient reaches a critical value, quicksand occurs and the well structure can be destroyed. Another difficulty encountered is drawdown in the wellbore and the drying up of the well. To overcome these problems, the flow around and beneath these wells is numerically simulated. The simulation results are used to investigate the effect of well and aquifer parameters on quicksand and drawdown. For practical purposes, the dimensionless drawdown-time and dimensionless vertical gradient-time curves are developed. It was found that the ratio of filling material thickness to well radius affects the shape of these type curves. The type curves may be used to predict the time after pumping commences when quicksand occurs and the well dries up. They are also useful to design the safe pumping rate and duration as well as the optimum well radius. These are demonstrated by analyzing the pumping test data from a case study in the arid Chah Kutah region, southern Iran.  相似文献   

17.
地下水加坡理论可有效的消除抽水试验引起的无效降深,结合云驾岭煤矿井筒检查孔抽水试验资料,对该井简检查孔涌水量进行了预算,预算副井筒啮。砂岩含水层涌水量为523．03m^3／h,实际涌水量为455m^3／h．误差率14．95％,可见运用加坡理论计算的矿井涌水量与井筒实际涌水量基本相符。  相似文献   

18.
在滨海地区,地下水水位受潮汐波动影响较大,使得传统的抽水试验、水位回复试验等方法确定含水层参数存在困难且花费较大。通过对广西北海市滨海含水层地下水位动态资料进行分析,发现其上升段和下降段是不对称的。基于海岸带承压含水层正弦潮汐波的传播理论,提出了确定含水层参数的分段法,并与振幅衰减法和滞后时间法进行对比,各种方法求出的储水系数与导水系数之比(S/T)很接近,说明分段法是有效的。对于北海市滨海含水层,上升段求出的S/T值比下降段要大,其成因机理还有待进一步分析。  相似文献   

19.
利用地下水流数值模拟软件Modflow耦合大型抽水试验和长观孔水位两个模型的方法,对含水层参数进行了识别与校验,该方法求得的含水层参数避免了只利用抽水试验模型校验所带来的不确定性。同时利用抽水实验数据进行抽水与恢复的全过程曲线拟合,水位降深模拟相对误差小于6％,并且对均衡水量、泉水的溢出量以及末流场拟合程度进行了分析,均衡水量模拟相对误差最大为2．6％,泉水溢出量模拟相对误差最大为8．14％,末流场拟合程度也较好,从而提高了含水层参数的准确性。实例研究表明,这种求参方法精度高、切实可行,可以推广到其他的含水层参数确定中。  相似文献   

20.
A mathematical model describing the hydraulic head distribution for a constant‐head test performed in a well situated at the centre of a patchy aquifer is presented. The analytical solution for the mathematical model is derived by the Laplace transforms and the Bromwich integral method. The solution for the hydraulic head has been shown to satisfy the governing equations, related boundary conditions, and continuity requirements for the hydraulic head and flow rate at the interface of the patch and outer regions. An efficient numerical approach is proposed to evaluate the solution, which has an integral covering an integration range from zero to infinity and an integrand consisting the product and square of the Bessel functions. This solution can be used to produce the curves of dimensionless hydraulic head against dimensionless time for investigating the effect of the contrast of formation properties on the dimensionless hydraulic head distribution. Define the ratio of outer‐region transmissivity to patch‐region transmissivity as α. The dimensionless hydraulic head for α=0.1 case is about 2.72 times to that for α=10 case at dimensionless large time (e.g. τ?106) when the dimensionless distance (ρ) equals 10. The results indicate that the hydraulic head distribution highly depends on the hydraulic properties of two‐zone formations. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号