首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Summary. Seismic anisotropy has been previously studied at depths usually not exceeding 100 or 150 km. In this paper we present a method of analysis of seismic records which is very sensitive to azimuthal anisotropy and is applicable at almost any depth range. The idea of the method is to detect and analyse the SH -component of the waves, converted from P to S in the mantle. The procedure of record processing includes frequency filtering, axis rotation, transformation of the record to a standard form, stacking the standardized SH -component records of many seismic events, and the harmonic analysis of amplitude as a function of the direction of wave propagation. When applied to the long-period records of NORSAR the procedure detected a converted wave with the properties implying the possibility of its propagation in a transversely isotropic medium with a horizontal axis of symmetry . Our preferred model postulates anisotropy of ∼ 1 per cent in a layer 50 km thick at the base of the upper mantle.  相似文献   

2.
Summary Acoustic signals from Apollo rockets at orbital altitude (188 km) appear to be explainable with the assumption that the exhaust plume serves as a conical body of large cross-section moving supersonically with the rocket. The presence of the surface signal (1.3 Hz and higher) implies that propagation in the upper atmosphere occurred as an N -wave shock cone without the strong attenuation to which an acoustic wave or even a saw-toothed (shocked) wave of similar frequency would be subjected. The shock cone does not attenuate because energy is continually re-supplied along the shock cone from the vehicle and its plume acting as a piston. Calculated overpressures do not reduce to acoustic amplitudes until the wave is below 40 km where acoustic attenuation becomes negligible.  相似文献   

3.
Summary. Travel times of seismic waves from teleseismically recorded events that occurred within the Adak Island region of the Central Aleutian Islands are used to constrain both the velocity structure of the region and the locations of events. It is found that the P-wave velocity within the descending lithosphere is approximately 7–8 per cent faster than that in the surrounding mantle for a slab length of 300–400 km.
The velocity structure so determined is then used as a model for the relocation of events recorded only locally. It is found that features of the Benioff zone seen in locations made with a spherically symmetric model can be seriously in error. In particular, an apparent increase in dip of the zone with depth disappears when the locations are made with the inhomogeneous model. The new locally determined hypocentres are now also more consistent with the locations based on teleseismic data.  相似文献   

4.
Teleseismic P waves passing through low-wave-speed bodies in the mantle are refracted, causing anomalies in their propagation directions that can be measured by seismometer arrays. Waves from earthquakes in the eastern Pacific and western North America arriving at the NORSAR array in Norway and at seismic stations in Scotland pass beneath the Iceland region at depths of ∼ 1000–2000 km. Waves arriving at NORSAR have anomalous arrival azimuths consistent with a low-wave-speed body at a depth of ∼ 1500 km beneath the Iceland–Faeroe ridge with a maximum diameter of ∼250 km and a maximum wave-speed contrast of ∼ 1.5 per cent. This agrees well with whole-mantle tomography results, which image a low-wave-speed body at this location with a diameter of ∼ 500 km and a wave-speed anomaly of ∼ 0.5 per cent, bearing in mind that whole-mantle tomography, because of its limited resolution, broadens and weakens small anomalies. The observations cannot resolve the location of the body, and the anomaly could be caused in whole or in part by larger bodies farther away, for example by a body imaged beneath Greenland by whole-mantle tomography.  相似文献   

5.
A seismic re fraction/wide-angle reflection profile is analysed for the presence of correlated events ('phases'). The correlation problem is formulated in terms of temporally, spatially and frequency-local complex covariances. For robustness, the method concentrates on phase rather than amplitude information. This allows a computationally efficient algorithm that can make allowance for signal correlation length and can model curved wavefronts. A statistical test based on residual phase misfit across the analysed subarray is used to assess the probability that a detected event represents a real correlated signal.
With our chosen analysis parameters and confidence level (over 99.9 per cent). 1222 events were detected in the data. Using simple techniques based on 1-D earth models, detected events are associated with a small number of particular wave types. In this way, we have succeeded in classifying almost 95 per cent of the detected events. Those that remain describe those components of the data that are inconsistent with our simple ray paths in the 1-D assumption and with our prescribed tolerance. These include reverberations, near-surface guided waves and reflected waves from strongly laterally inhomogeneous structures. According to our modelling, about 25 per cent of the detected events are consistent with simple P -wave reflected energy, and these are to a very large extent (over 85 per cent) distinct from all the other wave-type models we have used. A direct mapping of the detected events into the offset-depth domain reveals dear internal and external consistencies among the detections for the various wave types. Estimated earth structure is consistent with models from previous analyses based on much larger data sets.
We have thus succeeded in extracting correlated events from the data and decomposing these, approximately but meaningfully, into distinct classes (ray paths)  相似文献   

6.
To quantify the seismic properties of lower crustal rocks and to better constrain the origin of the lower crustal seismic reflectivity, we determined the complete 3-D seismic properties of a lower crustal section. Eight representative samples of the main lithologic and structural units outcropping in the Val Sesia (Ivrea zone) were studied in detail. The seismic velocities were calculated using the single crystal stiffness coefficients and the lattice preferred orientation (LPO) of each mineral in all samples. The 21 stiffness coefficients characterizing the elastic behaviour of each rock are determined. Mafic and ultramafic rocks such as pyroxenite and pyroxene-bearing gabbros display complex shear wave properties. These rocks are weakly birefringent (maximum 0.1 kms−1) and it is difficult to find consistent relationships between the seismic properties and the rock structure. On the other hand, seismic properties of deformed felsic rocks are essentially controlled by mica. They display strong S -wave birefringence (0.3 km s−1) and relatively high V p anisotropy (7.6 per cent). Amphibole also strongly influences the rock birefringence patterns. For both kind of rocks, the foliation is highly birefringent and the fast polarized shear wave is systematically oriented parallel to the foliation. We show that the number of mineral phases in the rock strongly controls the anisotropy. The seismic anisotropy has a complex role in the P -wave reflectivity. Compared to the isotropic case, anisotropy enhances the reflection coefficient for about 60 per cent of the possible lithological interfaces. For 40 per cent of the interfaces, the reflection coefficient is much lower when one considers the medium as anisotropic.  相似文献   

7.
A network of nine broad-band seismographs was operated from March to May 1994 to study the propagation of seismic waves across the Mexican Volcanic Belt (MVB) in the region of the Valley of Mexico. Analysis of the data from the network reveals an amplification of seismic waves in a wide period band al the stations situated in the southern part of the MVB.
The group velocities of the fundamental mode of the Rayleigh wave in the period range 2–13 s are found to be lower in the southern part of the MVB than in its northern part and in the region south of the MVB. The inversion of dispersion curves shows that the difference in group velocities is due to the presence of a superficial low-velocity layer (with an average S -wave velocity of 1.7 km s-1 and an average thickness of 2 km) beneath the southern part of the MVB. This low-velocity zone is associated with the region of active volcanism.
Numerical simulations show that this superficial low-velocity layer causes a regional amplification of 8–10 s period signals, which is of the same order as the amplification measured from the data. This layer also increases the signal duration significantly because of the dispersion of the surface waves. These results confirm the hypothesis of Singh et al. (1995), who suggested that the regional amplification observed in the Valley of Mexico is due to the anomalously low shear-wave velocity of the shallow volcanic rocks in the southern MVB  相似文献   

8.
Polarization anomaly of Love waves caused by lateral heterogeneity   总被引：1，自引：0，他引：1  
We calculate surface waves propagating in a laterally heterogeneous structure beneath the Kuril trench, where significant Love-wave polarization anomalies, called quasi-Love waves, are generated. Since 3-D wave propagation in the two-dimensionally heterogeneous structure can be assumed, we apply the 2.5-D finite difference method to the surface-wave calculations. The calculations show that a velocity contrast of 7 per cent at depths of less than 210 km beneath the Kuril trench cannot generate quasi-Love waves, and that an unlikely contrast of 20 per cent is required to generate clear quasi-Love waves. The possible cause of the quasi-Love waves inferred from previous studies on coupled free oscillations is a lateral variation in azimuthal anisotropy. The lateral variation in azimuthal anisotropy beneath the Kuril trench suggests a change in the mantle flow induced by the subducting slab.  相似文献   

9.
The Middle Durance fault system, southeastern France, is a slow active fault that produced moderate-size historical seismic events and shows evidence of at least one   M w ≳ 6.5  event in the last 29 000 yr. Based on dynamic rupture simulation, we propose earthquake scenarios that are constrained by knowledge of both the tectonic stress field and of the 3-D geometry of the Durance fault system. We simulate dynamic rupture interaction among several fault segmentations of different strikes, dips and rakes, using a 3-D boundary integral equation method. 50 combinations of reasonable stress field orientations, stress field amplitudes and hypocentre locations are tested. The probability of different rupture evolutions is then computed. Each segment ruptures mainly as a single event (44 per cent of the 50 simulations test in this paper). However, the probability that an event triggers simultaneously along three segments is high (26 per cent), leading to a potential rupture length of 45 km. Finally, 2 per cent of the simulations occur along four adjacent segments, producing the greatest total rupture length of 55 km. The simulation results show that the southernmost segment is most easily ruptured (40 per cent), because of its favourable orientation with respect to the tectonic stress and of its favourable location for interaction with the other segments. South-bound unilateral propagation is slightly preferable (41 per cent), compared to north-bound unilateral and bilateral propagation modes. Although, these rupture scenarios cannot be directly translated into probabilities of occurrence, they do provide a better insight as to which rupture scenarios are more likely, an important element to better estimate near-field strong ground motion and seismic hazard.  相似文献   

10.
P-SH conversion is commonly observed in teleseismic P waves, and is often attributed to dipping interfaces beneath the receiver. Our modelling suggests an alternative explanation in terms of flat-layered anisotropy. We use reflectivity techniques to compute three-component synthetic seismograms in a 1-D anisotropic layered medium. For each layer of the medium, we prescribe values of seismic velocities and hexagonally symmetric anisotropy about a common symmetry axis of arbitrary orientation. A compressional wave in an anisotropic velocity structure suffers conversion to both SV -and SH -polarized shear waves, unless the axis of symmetry is everywhere vertical or the wave travels parallel to all symmetry axes. The P-SV conversion forms the basis of the widely used 'receiver function' technique. The P-SH conversion occurs at interfaces where one or both layers are anisotropic. A tilted axis of symmetry and a dipping interface in isotropic media produce similar amplitudes of both direct ( P ) and converted ( Ps ) phases, leaving the backazimuth variation of the P-Ps delay as the main discriminant. Seismic anisotropy with a tilted symmetry axis leads to complex synthetic seismograms in velocity models composed of just a few flat homogeneous layers. It is possible therefore to model observations of P coda with prominent transverse components with relatively simple 1-D velocity structures. Successful retrieval of salient model characteristics appears possible using multiple realizations of a genetic-algorithm (GA) inversion of P coda from several backazimuths. Using GA inversion, we determine that six P coda recorded at station ARU in central Russia are consistent with models that possess strong (> 10 per cent) anisotropy in the top 5 km and between 30 and 43 km depth. The symmetry axes are tilted, and appear aligned with the seismic anisotropy orientation in the mantle under ARU suggested by SKS splitting.  相似文献   

11.
A massive vapour cloud explosion occurred at the Buncefield fuel depot near Hemel Hempstead, UK, in the morning of 2005 December 11. The explosion was the result of an overflow from one of the storage tanks with the release of over 300 tons of petrol and generating a vapour cloud that spread over an area of 80 000 m2, before being ignited. Considerable damage was caused in the vicinity of the explosion and a total of 43 people were injured. The explosion was detected by seismograph stations in the UK and the Netherlands and by infrasound arrays in the Netherlands. We analysed the seismic recordings to determine the origin time of 06:01:31.45 ±0.5 s (UTC) from P -wave arrival times. Uncertainties in determination of origin time from acoustic arrival times alone were less than 10 s. Amplitudes of P -, Lg and primary acoustic waves were measured to derive decay relationships as function of distance. From the seismic amplitudes we estimated a yield of 2–10 tons equivalent to a buried explosion. Most seismic stations recorded primary and secondary acoustic waves. We used atmospheric ray tracing to identify the various travel paths, which depend on temperature and wind speed as function of altitude, leading to directional variation. Refracted waves were observed from the troposphere, stratosphere and thermosphere with a good match between observed and calculated traveltimes. The various wave types were also identified through array processing, which provides backazimuth and slowness, of recordings from an infrasound array in the Netherlands. The amplitude of stratospheric refracted acoustic waves recorded by the array microbarometers was used to estimate a yield of 21.6 (±5) tons TNT equivalent. We have demonstrated through joint seismo-acoustic analysis of the explosion that both the seismic velocity model and the atmospheric model are sufficient to explain the observed traveltimes.  相似文献   

12.
The Born approximation is applied to the modelling of the propagation of deeply turning longperiod body waves through heterogeneities in the lowermost mantle. We use an exact Green's function for a spherically symmetric earth model that also satisfies the appropriate boundary conditions at internal boundaries and the surface of the earth. The scattered displacement field is obtained by a numerical quadrature of the product of the Green's function, the exciting wavefield and structural perturbations. We study three examples: scattering of longperiod P waves from a plume rising from the coremantle boundary (CMB), generation of longperiod precursors to PKIKP by strong, localized scatterers at the CMB, and propagation of corediffracted P waves through largescale heterogeneities in D". The main results are as follows: (1) the signals scattered from a realistic plume are small with relative amplitudes of less than 2 per cent at a period of 20 s, rendering plume detection a fairly difficult task; (2) strong heterogeneities at the CMB of appropriate size may produce observable longperiod precursors to PKIKP in spite of the presence of a diffraction from the PKP B caustic; (3) corediffracted P  waves ( P diff) are sensitive to structure in D" far off the geometrical ray path and also far beyond the entry and exit points of the ray into and out of D"; sensitivity kernels exhibit ringshaped patterns of alternating sign reminiscent of Fresnel zones; (4) P diff also shows a nonnegligible sensitivity to shear wave velocity in D"; (5) down to periods of 40 s, the Born approximation is sufficiently accurate to allow waveform modelling of P diff through largescale heterogeneities in D" of up to 5 per cent.  相似文献   

13.
Summary Co-phase is a statistic designed for the detection and parameter estimation of signals by detector arrays. Ionospheric motions detected by an array of four phase-path sounders following a large earthquake are found by the co-phase technique to have a phase velocity equal to that of seismic Rayleigh waves of the same period, and to arrive from the direction of the epicentre. The calculation of co-phase for an 80-min sample of data from an 8-element array of microbarographs detects the presence of a signal from a high energy event despite a signal-to-noise ratio of less than unity. Co-phase analysis of acoustic signals generated by the Saturn-Apollo rocket launches indicates that these signals originate at ionospheric heights and propagate in a waveguide between a soundspeed maximum and a steep density gradient in the mesosphere.  相似文献   

14.
Summary. The upper boundary of the descending oceanic plate is located by using PS -waves (converted from P to S at the boundary) in the Tohoku District, the north-eastern part of Honshu, Japan. the observed PS-P time data are well explained by a two-layered oceanic plate model composed of a thin low-velocity upper layer whose thickness is less than 10 km and a thick high-velocity lower layer; the upper and lower layers respectively have 6 per cent lower and 6 per cent higher velocity than the overriding mantle. the estimated location of the upper boundary is just above the upper seismic plane of the double-planed deep seismic zone. This result indicates that events in the upper seismic plane, at least in the depth range from 60 to 150 km, occur within the thin low-velocity layer on the surface of the oceanic plate.  相似文献   

15.
We have analysed the fundamental mode of Love and Rayleigh waves generated by 12 earthquakes located in the mid-Atlantic ridge and Jan Mayen fracture zone. Using the multiple filter analysis technique, we isolated the Rayleigh and Love wave group velocities for periods between 10 and 50  s. The surface wave propagation paths were divided into five groups, and average group velocities calculated for each group. The average group velocities were inverted and produced shear wave velocity models that correspond to a quasi-continental oceanic structure in the Greenland–Norwegian Sea region. Although resolution is poor at shallow depth, we obtained crustal thickness values of about 18  km in the Norwegian Sea area and 9  km in the region between Svalbard and Iceland. The abnormally thick crust in the Norwegian Sea area is ascribed to magmatic underplating and the thermal blanketing effect of sedimentary layers. Maximum crustal shear velocities vary between 3.5 and 3.9  km  s−1 for most paths. An average lithospheric thickness of 60  km was observed, which is lower than expected for oceanic-type structure of similar age. We also observed low shear wave velocities in the lower crust and upper mantle. We suggest that high heat flow extending to depths of about 30  km beneath the surface can account for the thin lithosphere and observed low velocities. Anisotropy coefficients of 1–5 per cent in the shallow layers and >7 per cent in the upper mantle point to the existence of polarization anisotropy in the region.  相似文献   

16.
Broad-band data from South American earthquakes recorded by Californian seismic networks are analysed using a newly developed seismic wave migration method—the slowness backazimuth weighted migration (SBWM). Using the SBWM, out-of-plane seismic P -wave reflections have been observed. The reflection locations extend throughout the Earth's lower mantle, down to the core–mantle boundary (CMB) and coincide with the edges of tomographically mapped high seismic velocities. Modelling using synthetic seismograms suggests that a narrow (10–15 km) low- or high-velocity lamella with about 2 per cent velocity contrast can reproduce the observed reflected waveforms, but other explanations may exist. Considering the reflection locations and synthetic modelling, the observed out-of-plane energy is well explained by underside reflections off a sharp reflector at the base of the subducted lithosphere. We also detect weaker reflections corresponding to the tomographically mapped top of the slab, which may arise from the boundary between the Nazca plate and the overlying former basaltic oceanic crust. The joint interpretation of the waveform modelling and geodynamic considerations indicate mass flux of the former oceanic lithosphere and basaltic crust across the 660 km discontinuity, linking processes and structure at the top and bottom of the Earth's mantle, supporting the idea of whole mantle convection.  相似文献   

17.
Summary. This note reports on the remarkable focusing of seismic body waves at or near the antipode (Δ= 180°) of an earthquake's epicentre. The particular seismic velocity structure and sphericity of the Earth cause body-wave phases such as P (diff), PKP, PP, PPP, PcPPKP, SKSSKS, SS , etc. to converge individually at antipodal distances after being diffracted, reflected or refracted at discontinuities. This focusing strongly amplifies each signal up to almost one order of magnitude with respect to the normal phase recorded two or more degrees away. Since the signal/noise ratio is enhanced in the same proportion, seismograms at antipodal distances provide clear and strong arrivals of otherwise weak phases. Antipodal monitoring of seismic waves is suggested as a powerful means of exploring the Earth's interior. The study of these 'seismic images' generated at focal points of seismic rays will yield information on the departures from lateral homogeneity and sphericity of the core, as well as stronger constraints on earth models. To interpret the observations correctly, the data must be compared with theoretically generated seismograms. Since the appropriate ray theory equations (see, e.g. Scholte; Gilbert & Helmberger; Richards) are singular at Δ=180°, a corrective measure is taken which provides a formal expression for the wave amplitude that remains finite at the antipode, and reproduces the usual expressions at other distances.  相似文献   

18.
Summary. Normal mode theory, extended to the slightly laterally heterogeneous earth by the first-order Born approximation, is applied to the waveform inversion of mantle Love wave (200–500 s) for the Earth's lateral heterogeneity at l = 2 and a spherically symmétric anelasticity ( Q μ) structure. The data are from the Global Digital Seismograph Network (GDSN). The l =2 pattern is very similar to the results of other studies that used either different méthods, such as phase velocity measurements and multiplet location measurements, or a different data set, such as mantle Rayleigh waves from different instruments. The results are carefully analysed for variance reduction and are most naturally explained by heterogeneity in the upper 420 km. Because of the poor resolution of the data set for the deep interior, however, a fairly large heterogeneity in the transition zones, of the order of up to 3.5 per cent in shear wave velocity, is allowed. It is noteworthy that Love waves of this period range cannot constrain the structure below 420 km and thus any model presented by similar studies below this depth are likely to be constrained by Rayleigh waves (spheroidal modes) only.
The calculated modal Q values for the obtained Q μ model fall within the error bars of the observations. The result demonstrates the discrepancy of Rayleigh wave Q and Love wave Q and indicates that care must be taken when both Rayleigh and Love wave data, including amplitude information, are inverted simultaneously.
Anomalous amplitude inversions of G2 and G3, for example, are observed for some source-receiver pairs. This is due to multipathing effects. One example near the epicentral region, which is modelled by the obtained l = 2 heterogeneity, is shown.  相似文献   

19.
The zero-lag cross-correlation technique, used for array analysis in the hypothesis of plane waves, has been modified to allow the wave front to be circular. Synthetic tests have been performed to check the capability of the method, which returns the input test data when the source–array distances are not greater than two or three times the array aperture. For this distance range the method furnishes an estimate of the apparent velocity and the epicentral coordinates of the source. For more distant sources the method becomes equivalent to that based on the planar-wave approximation, which gives an estimate of the backazimuth to the source and the apparent velocity. The method has been applied to seismic data recorded at the active volcano located at Deception Island, Antarctica. 35 volcanic long-period events occurring in a small swarm were selected. Results show that the epicentres are close to the array (between 0.4 and 2 km) and aligned in a SW direction, in agreement with one of the main directions of the fracture system of Deception volcano.  相似文献   

20.
Small-scale elastic heterogeneities (<5  km) are found in the upper lithosphere underneath the Gräfenberg array, southeast Germany. The results are based on the analysis of broadband recordings of 17 intermediate-depth (201–272  km) events from the Hindu Kush region. The wavefront of the first P arrival and the following 40  s coda are separated into coherent and incoherent (scattered) parts in the frequency range from 0.05 to 5  Hz. The frequency-dependent intensities of the mean and fluctuation wavefields are used to describe the scattering characteristics of the lithosphere underneath the receivers. It is possible to discriminate a weak-fluctuation regime of the wavefield in the frequency range below approximately 1.5–2.5  Hz and a strong-fluctuation regime starting at 2.0–2.5  Hz and continuing to higher frequencies. In order to explain the observed wavefield fluctuations, an approach with seismic scattering at random media-type structures is proposed. The preferred model contains heterogeneities with 3–7 per cent perturbations in seismic velocity and correlation lengths of 0.6–4.8  km in the crust. This is compatible with models from active seismic experiments. Scattering in the lithospheric mantle is not required, but cannot be excluded at weak velocity contrasts (<3 per cent).  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号