首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
An expert-based approach was used to identify 10 morphological unit types within a reach of the gravel bed, regulated Yuba River, California, that is heavily utilized by spawning Chinook salmon (Oncorhynchus tshawytscha). Analysis of these units was carried out using two-dimensional hydrodynamic modeling, field-based geomorphic assessment, and detailed spawning surveying. Differently classified morphological units tended to exhibit discrete hydraulic signatures. In most cases, the Froude number adequately differentiated morphological units, but joint depth–velocity distributions proved the most effective hydraulic classification approach. Spawning activity was statistically differentiated at the mesoscale of the morphological unit. Salmon preferred lateral bar, riffle, and riffle entrance units. These units had moderately high velocity (unit median > 0.45 m s− 1) and low depth (unit median < 0.6 m), but each exhibited a unique joint depth–velocity distribution. A large proportion of redds (79%) were associated with conditions of convective flow acceleration at riffle and riffle entrance locations. In addition to reflecting microhabitat requirements of fish, it was proposed that the hydraulic segregation of preferred from avoided or tolerated morphological units was linked to the mutual association of specific hydraulic conditions with suitable caliber sediment that promotes the provision and maintenance of spawning habitat.  相似文献   

2.
The mechanisms which control the formation and maintenance of pool–riffles are fundamental aspects of channel form and process. Most of the previous investigations on pool–riffle sequences have focused on alluvial rivers, and relatively few exist on the maintenance of these bedforms in boulder-bed channels. Here, we use a high-resolution two-dimensional flow model to investigate the interactions among large roughness elements, channel hydraulics, and the maintenance of a forced pool–riffle sequence in a boulder-bed stream. Model output indicates that at low discharge, a peak zone of shear stress and velocity occurs over the riffle. At or near bankfull discharge, the peak in velocity and shear stress is found at the pool head because of strong flow convergence created by large roughness elements. The strength of flow convergence is enhanced during model simulations of bankfull flow, resulting in a narrow, high velocity core that is translated through the pool head and pool center. The jet is strengthened by a backwater effect upstream of the constriction and the development of an eddy zone on the lee side of the boulder. The extent of flow convergence and divergence is quantified by identifying the effective width, defined here as the width which conveys 90% of the highest modeled velocities. At low flow, the ratio of effective width between the pool and riffle is roughly 1:1, indicating little flow convergence or divergence. At bankfull discharge, the ratio of effective width is approximately 1:3 between the pool and downstream riffle, illustrating the strong flow convergence at the pool head. The effective width tends to equalize again with a ratio of 1:1 between the pool and riffle during a modeled discharge of a five-year flood, as the large roughness elements above the pool become drowned out. Results suggest that forced pool–riffle sequences in boulder-bed streams are maintained by flows at or near bankfull discharge because of stage-dependent variability in depth-averaged velocity and tractive force.  相似文献   

3.
This paper describes the application of a commercially available, three-dimensional computational fluid dynamic (CFD) model to simulate the flow structure in an upland river that is prone to flooding. Simulations use a rectangular channel geometry, smooth sidewalls and a bed topography obtained from the field site that contains a subdued pool–riffle sequence. The CFD model uses the RNG κ– turbulence closure scheme of Yakhot and Orszag (J. Sci. Comput. 1 (1986) 1), as implemented in FLUENT 4.4.4, with a free surface. Results are shown for numerical runs simulating a 1:100 year return interval flood. Output from the numerical model is compared to a physical model experiment that uses a 1:35 scale fibreglass mould of the field study reach and measures velocity using ultrasonic Doppler velocity profiling (UDVP). Results are presented from the numerical and flume models for the water surface and streamwise velocity pattern and for the secondary flows simulated in the numerical model. A good agreement is achieved between the CFD model output and the physical model results for the downstream velocities.Results suggest that the streamwise velocity is the main influence on the flow structure at the discharge and channel configuration studied. Secondary flows are, in general, very weak being below the resolution of measurement in the physical model and less than 10% of the streamwise velocity in the numerical model. Consequently, there is no evidence for a ‘velocity dip’. It is suggested that the subdued topography or inlet morphology may inhibit the development of secondary flows that have been recorded in previous flat-bed, rectangular open channel flows. A significant corollary of these results is that the morphological evolution of the pool–riffle sequence at high discharges may be controlled primarily by the downstream distribution of velocity and sediment transport with little role for lateral sorting and sediment routing by secondary flows. This paper also raises a number of issues that may be of use in future CFD modelling of three-dimensional flow in open channels within the geomorphological community.  相似文献   

4.
The hydraulic and sedimentary characteristics of the spawning habitat of Atlantic salmon (Salmo salar) in tributary and mainstem locations in a river system in north-east Scotland are described. Salmon used spawning sites with a relatively wide range in sediment characteristics, although measures of central tendency were all in the gravel (2–64 mm) size-class. The dominant factor differentiating the sediment characteristics of study sites was the level of fine sediment, which accounted for significant differences between tributary and mainstem samples. The ranges of depth and velocity in areas used for spawning by salmonids were found to be similar in all tributary study sites. However, due to the interdependence of depth and velocity, major differences were observed between tributary and mainstem study sites in that spawning in larger streams tended to be associated with deeper, faster flowing water. Spawning locations were shown to have similar Froude number, despite different sized streams and species of salmonid. Due to its dimensionless nature and significance in characterising flow hydraulics, the Froude number is proposed as a potentially useful variable for describing the habitat of aquatic organisms.  相似文献   

5.
The impact of large twentieth century floods on the riparian vegetation and channel morphology of the relatively wide anabranching and braided Nahal Arava, southern Israel, was documented as part of developing tools to (a) identify recent large floods, (b) determine these flood's respective magnitudes in alluvial ungauged streams, and (c) determine long-term upper bounds to flood stages and magnitudes. Along most of its course Nahal Paran, a major tributary that impacts the morphology, floods and sediments of Nahal Arava at the study reach, is a coarse-gravel, braided ephemeral stream. Downstream of the Arava–Paran confluence, aeolian and fluvial sand delivered from eastern Arava valley alters the channel morphology. The sand has accreted up to 2.5 m above the distinct current channels, facilitating the recording of large floods. This sand enhances the establishment of denser riparian vegetation (mainly Tamarix nilotica and Haloxylon persicum) that interacts with floods and affects stream morphology. A temporal association was found between specific floods recorded upstream and tree-ring ages of re-growth of flood-damaged tamarix trees (‘Sigafoos trees’) in the past 30 years. This association can be utilized for developing a twentieth century flood chronology in hyperarid ungauged basins in the region. The minimum magnitude of the largest flood that covered the entire channel width, estimated from flood deposits, is approximately 1700–1800 m3s− 1. This is a larger magnitude than the largest gauged flood of 1150 m3s− 1 that occurred in 1970 about 30 km upstream in Nahal Paran. Our estimation agrees with flood magnitude estimated from the regional envelope curve of the largest floods. Based on Holocene alluvial stratigraphy and OSL dating in the study reach we also conclude that flood stages did not reach the late Holocene ( 2.2 ka) surface and therefore we estimate a non-exceedance upper bound of  2000 m3s− 1 flood magnitudes for Nahal Arava during that interval. This study indicates that in unfavorable areas the combination of hydrology, fluvial morphology and botanic evidence can increase our understanding of ungauged basins and give information crucial for hydrology planning.  相似文献   

6.
We have monitored initiation conditions for six debris flows between May 2004 and July 2006 in a 0.3 km2 drainage basin at Chalk Cliffs; a band of hydrothermally-altered quartz monzonite in central Colorado. Debris flows were initiated by water runoff from colluvium and bedrock that entrained sediment from rills and channels with slopes ranging from about 14° to 45°. The availability of channel material is essentially unlimited because of thick channel fill and refilling following debris flows by rock fall and dry ravel processes. Rainfall exceeding I = 6.61(D)− 0.77, where I is rainfall intensity (mm/h), and D is duration (h), was required for the initiation of debris flows in the drainage basin. The approximate minimum runoff discharge from the surface of bedrock required to initiate debris flows in the channels was 0.15 m3/s. Colluvium in the basin was unsaturated immediately prior to (antecedent) and during debris flows. Antecedent, volumetric moisture levels in colluvium at depths of 1 cm and 29 cm ranged from 4–9%, and 4–7%, respectively. During debris flows, peak moisture levels in colluvium at depths of 1 cm and 29 cm ranged from 10–20%, and 4–12%, respectively. Channel sediment at a depth of 45 cm was unsaturated before and during debris flows; antecedent moisture ranged from 20–22%, and peak moisture ranged from 24–38%. Although we have no measurements from shallow rill or channel sediment, we infer that it was unsaturated before debris flows, and saturated by surface-water runoff during debris flows.Our results allow us to make the following general statements with regard to debris flows generated by runoff in semi-arid to arid mountainous regions: 1) high antecedent moisture levels in hillslope and channel sediment are not required for the initiation of debris flows by runoff, 2) locations of entrainment of sediment by successive runoff events can vary within a basin as a function of variations in the thickness of existing channel fill and the rate of replenishment of channel fill by rock fall and dry ravel processes following debris flows, and 3) rainfall and simulated surface-water discharge thresholds can be useful in understanding and predicting debris flows generated by runoff and sediment entrainment.  相似文献   

7.
Experiments with marked pebbles were carried out on different sized rivers of the Belgian Ardenne (catchment areas varying from less than 1 km2 to 2700 km2). Specific stream power required to cause bedload movement was evaluated and critical values were obtained. Three types of relationship between critical specific stream power (ω0) and grain size (D) were established. The values for ω0 in the largest river (the Ourthe) were the lowest and were close to the values obtained for mountainous rivers carrying large boulders. In medium sized rivers (catchment area between 40 and 500 km2), the critical unit stream power was higher. It is likely that it is due to the bedform's greater resistance. This resistance would use up some of the energy that can cause movement and transport of bedload. The amount of resistance of the bedform can be expressed as bedform shear stress (τ″), determined by the relationship between grain shear stress (τ′—that determines movement and transport of the bedload) and the total shear stress (τ). This ratio varies between 0.4 and 0.5 in the medium sized rivers, compared to 0.7 in the Ourthe. In headwater streams (less than 20 km2), there is greater loss of energy due to bedform resistance (τ′/τ<0.3). Critical specific stream power is higher in this third type of river than in the other two.  相似文献   

8.
The role, function, and importance of large woody debris (LWD) in rivers depend strongly on environmental context and land use history. The coastal watersheds of central and northern Maine, northeastern U.S., are characterized by low gradients, moderate topography, and minimal influence of mass wasting processes, along with a history of intensive commercial timber harvest. In spite of the ecological importance of these rivers, which contain the last wild populations of Atlantic salmon (Salmo salar) in the U.S., we know little about LWD distribution, dynamics, and function in these systems. We conducted a cross-basin analysis in seven coastal Maine watersheds, documenting the size, frequency, volume, position, and orientation of LWD, as well as the association between LWD, pool formation, and sediment storage. In conjunction with these LWD surveys, we conducted extensive riparian vegetation surveys. We observed very low LWD frequencies and volumes across the 60 km of rivers surveyed. Frequency of LWD ≥ 20 cm diameter ranged from 15–50 pieces km− 1 and wood volumes were commonly < 10–20 m3 km− 1. Moreover, most of this wood was located in the immediate low-flow channel zone, was oriented parallel to flow, and failed to span the stream channel. As a result, pool formation associated with LWD is generally lacking and < 20% of the wood was associated with sediment storage. Low LWD volumes are consistent with the relatively young riparian stands we observed, with the large majority of trees < 20 cm DBH. These results strongly reflect the legacy of intensive timber harvest and land clearing and suggest that the frequency and distribution of LWD may be considerably less than presettlement and/or future desired conditions.  相似文献   

9.
Sediment rating parameters and their implications: Yangtze River, China   总被引：4，自引：0，他引：4  
This study examines the characteristics of sediment rating parameters recorded at various gauging stations in the Yangtze Basin in relation to their controls. Our findings indicate that the parameters are associated with river channel morphology of the selected reaches. High b-values (> 1.600) and low log(a) values (< − 4.000) occur in the upper course of the steep rock-confined river, characterizing high unit stream power flows. Low b-values (< 0.900) and high log(a) values (> − 1.000) occur in the middle and lower Yangtze River associated with meandering reaches over low gradients, and can be taken to imply aggradation in these reaches with low stream power. Higher b-values (0.900–1.600) and lower log(a)-values (− 4.000 to − 1.000) characterize the reaches between Yichang and Xinchang, immediately below the Three Gorges. These values indicate channel erosion and bed instability that result from changes in channel gradient from the upstream steep valley to downstream low slope flood plain settings. Differences in channel morphology accompany these changes. Confined, V-shaped valleys occur upstream and are replaced downstream by broad U-shaped channels. The middle and lower Yangtze shows an apparent increase in channel instability over the past 40 years. This inference is based on sediment rating parameters from various gauging stations that record increasing b-values against decreasing log(a)-values over that time. Analysis of the sediment load data also reveals a strong correlation between changes in sediment rating curve parameters and reduction of annual sediment budget (4.70 × 108 t to 3.50 × 108 t/year, from the 1950s to 1990s), largely due to the damming of the Yangtze and sediment load depletion through siltation in the Dongting Lake. Short-term deviations from the general trends in the sediment rating parameters are related to hydroclimatic events. Extreme low b-values and high log(a)-values signify the major flood years, while the reverse indicates drought events. When compared with rivers from other climate settings, it is evident that the wide range of values of the Yangtze rating parameters reflects the huge discharge driven by the monsoon precipitation regime of eastern China.  相似文献   

10.
Despite more than 40 yr of research attributing temporal changes in streambank erosion rates to subaerial processes, little quantitative information is available on the relationships between streambank erodibility (kd) and critical shear stress (τc) and the environmental conditions and processes that enhance streambank erosion potential. The study goal was to evaluate temporal changes in kd and τc from soil desiccation and freeze–thaw cycling. Soil erodibility and τc were measured monthly in situ using a multiangle, submerged jet test device. Soil moisture, temperature, and bulk density as well as precipitation, air temperature, and stream stage were measured continuously to determine changes in soil moisture content and state. Pairwise Mann–Whitney tests indicted kd was 2.9 and 2.1 times higher (p < 0.0065) during the winter (December–March) than in the spring/fall (April–May, October–November) and the summer (June–September), respectively. Regression analysis showed 80% of the variability in kd was explained by freeze–thaw cycling alone. Study results also indicated soil bulk density was highly influenced by winter weather conditions (r2 = 0.86): bulk density was inversely related to both soil water content and freeze–thaw cycling. Results showed that significant changes in the resistance of streambank soils to fluvial erosion can be attributed to subaerial processes. Water resource professionals should consider the implications of increased soil erodibility during the winter in the development of channel erosion models and stream restoration designs.  相似文献   

11.
The Zambapala Fault Zone (ZFZ) is located at the link between the offshore structures of the Gulf of Guayaquil and the Guayaquil Caracas Megashear (GCM) that accommodates the northeastward motion of the North Andean Block. We use morphological observations of drainage offset to assess the active motion of the Zambapala Fault. The relation between the horizontal offset amount D of the stream channel and the upstream length L from the offset segment, and offset of beach morphology provide a measurement of the average slip rate of the motion of the fault to an accuracy of a fraction of millimeters per year. The drainage network is short, running down the southeastern slopes of the Zambapala Cordillera (297 m), a Quaternary dome uplifted along a positive flower structure. We measure the D (drainage offset along the fault)/L (drainage length from the fault) relation for the upper and more recent part of the drainage network. The relation suggests that the fault is active at present. Capture occurs along the middle slopes and channel straightening near the littoral plain, hiding part or most of the fault offset. The fault trace crosses the littoral plain, showing 35–40 m offset of the inner beach ridge, and delimiting variations of the beach morphology. The attribution of a maximum age of 5000–6000 years to the oldest beach ridge (the postglacial transgression) allows us to calculate a minimal mean slip rate of 5.8–8 mm year−1. This result confirms that the Guayaquil Caracas Megashear extends to the Gulf of Guayaquil through the Zambapala Fault Zone, which accommodate at least 60–80% of the slip motion of the Guayaquil Carcas Megashear.  相似文献   

12.
Reach-scale channel geometry of mountain streams   总被引：3，自引：0，他引：3  
Ellen Wohl  David M. Merritt   《Geomorphology》2008,93(3-4):168-185
The basic patterns and processes of steep channels remain poorly known relative to lower-gradient channels. In this analysis, characteristics of step-pool, plane-bed, and pool-riffle channels are examined using a data set of 335 channel reaches from the western United States, Nepal, New Zealand, and Panama. We analyzed differences among the three channel types with respect to hydraulics, channel geometry, boundary roughness, and bedforms. Step-pool channels have significantly steeper gradients, coarser substrate, higher values of shear stress and stream power for a given discharge, and larger ratios of bedform amplitude/wavelength (H/L). Pool-riffle channels have greater width/depth ratios and relative grain submergence (R/D84) than the other channel types. Plane-bed channels tend to have intermediate values for most variables examined. Relative form submergence (R/H) is statistically similar for step-pool and pool-riffle channels. Despite the lesser relative grain submergence and greater bedform amplitude of step-pool channels, mean values of Darcy–Weisbach friction factor do not change in response to changes in relative grain submergence. These patterns suggest that adjustments along mountain streams effectively maximize resistance to flow and minimize downstream variability in resistance among the different channel types.  相似文献   

13.
At least one large, late Pleistocene flood traveled into the Owyhee River as a result of a rise and subsequent outburst from pluvial Lake Alvord in southeastern Oregon. Lake Alvord breached Big Sand Gap in its eastern rim after reaching an elevation of 1292 m, releasing 11.3 km3 of water into the adjacent Coyote Basin as it eroded the Big Sand Gap outlet channel to an elevation of about 1280 m. The outflow filled and then spilled out of Coyote Basin through two outlets at 1278 m and into Crooked Creek drainage, ultimately flowing into the Owyhee and Snake Rivers. Along Crooked Creek, the resulting flood eroded canyons, stripped bedrock surfaces, and deposited numerous boulder bars containing imbricated clasts up to 4.1 m in diameter, some of which are located over 30 m above the present-day channel.Critical depth calculations at Big Sand Gap show that maximum outflow from a 1292- to 1280-m drop in Lake Alvord was  10,000 m3 s− 1. Flooding became confined to a single channel approximately 40 km downstream of Big Sand Gap, where step-backwater calculations show that a much larger peak discharge of 40,000 m3 s− 1 is required to match the highest geologic evidence of the flood in this channel. This inconsistency can be explained by (1) a single 10,000 m3 s− 1 flood that caused at least 13 m of vertical incision in the channel (hence enlarging the channel cross-section); (2) multiple floods of 10,000 m3 s− 1 or less, each producing some incision of the channel; or (3) an earlier flood of 40,000 m3 s− 1 creating the highest flood deposits and crossed drainage divides observed along Crooked Creek drainage, followed by a later 10,000 m3 s− 1 flood associated with the most recent shorelines in Alvord and Coyote Basins.Well-developed shorelines of Lake Alvord at 1280 m and in Coyote Basin at 1278 m suggest that after the initial flood, postflood overflow persisted for an extended period, connecting Alvord and Coyote Basins with the Owyhee River of the Columbia River drainage. Surficial weathering characteristics and planktonic freshwater diatoms in Lake Alvord sediment stratigraphically below Mt. St. Helens set Sg tephra, suggest deep open-basin conditions at  13–14 ka (14C yr) and that the flood and prominent shorelines date to about this time. But geomorphic and sedimentological evidence also show that Alvord and Coyote Basins held older, higher-elevation lakes that may have released earlier floods down Crooked Creek.  相似文献   

14.
Distinct rock fragment displacements occur on the ambas, or structurally determined stepped mountains of the Northern Ethiopian Highlands. This paper describes the rock fragment detachment from cliffs by rockfall, quantifies its annual rate, and identifies factors controlling rock fragment movement on the scree slopes. It further presents a conceptual model explaining rock fragment cover at the soil surface in these landscapes. In the May Zegzeg catchment (Dogu'a Tembien district, Tigray), rockfall from cliffs and rock fragment movement on debris slopes by runoff and livestock trampling were monitored over a 4-year period (1998–2001). Rockfall and rock fragment transport mainly induced by livestock trampling appear to be important geomorphic processes. Along a 1500-m long section of the Amba Aradam sandstone cliff, at least 80 t of rocks are detached yearly and fall over a mean vertical distance of 24 m resulting in a mean annual cliff retreat rate of 0.37 mm y− 1. Yearly unit rock fragment transport rates on scree slopes ranged between 23.1 and 37.9 kg m− 1 y− 1. This process is virtually stopped when exclosures are established. Corresponding mean rock fragment transport coefficients K are 32–69 kg m− 1 y− 1 on rangeland but only 3.9 kg m− 1 y− 1 in densely vegetated exclosures. A conceptual model indicates that besides rockfall from cliffs and argillipedoturbation, all factors and processes of rock fragment redistribution in the study area are of anthropogenic origin.  相似文献   

15.
Debris flows generated during rain storms on recently burned areas have destroyed lives and property throughout the Western U.S. Field evidence indicate that unlike landslide-triggered debris flows, these events have no identifiable initiation source and can occur with little or no antecedent moisture. Using rain gage and response data from five fires in Colorado and southern California, we document the rainfall conditions that have triggered post-fire debris flows and develop empirical rainfall intensity–duration thresholds for the occurrence of debris flows and floods following wildfires in these settings. This information can provide guidance for warning systems and planning for emergency response in similar settings.Debris flows were produced from 25 recently burned basins in Colorado in response to 13 short-duration, high-intensity convective storms. Debris flows were triggered after as little as six to 10 min of storm rainfall. About 80% of the storms that generated debris flows lasted less than 3 h, with most of the rain falling in less than 1 h. The storms triggering debris flows ranged in average intensity between 1.0 and 32.0 mm/h, and had recurrence intervals of two years or less. Threshold rainfall conditions for floods and debris flows sufficiently large to pose threats to life and property from recently burned areas in south-central, and southwestern, Colorado are defined by: I = 6.5D− 0.7 and I = 9.5D− 0.7, respectively, where I = rainfall intensity (in mm/h) and D = duration (in hours).Debris flows were generated from 68 recently burned areas in southern California in response to long-duration frontal storms. The flows occurred after as little as two hours, and up to 16 h, of low-intensity (2–10 mm/h) rainfall. The storms lasted between 5.5 and 33 h, with average intensities between 1.3 and 20.4 mm/h, and had recurrence intervals of two years or less. Threshold rainfall conditions for life- and property-threatening floods and debris flows during the first winter season following fires in Ventura County, and in the San Bernardino, San Gabriel and San Jacinto Mountains of southern California are defined by I = 12.5D−0.4, and I = 7.2D−0.4, respectively. A threshold defined for flood and debris-flow conditions following a year of vegetative recovery and sediment removal for the San Bernardino, San Gabriel and San Jacinto Mountains of I = 14.0D−0.5 is approximately 25 mm/h higher than that developed for the first year following fires.The thresholds defined here are significantly lower than most identified for unburned settings, perhaps because of the difference between extremely rapid, runoff-dominated processes acting in burned areas and longer-term, infiltration-dominated processes on unburned hillslopes.  相似文献   

16.
Beach–dune seasonal elevation changes, aeolian sand transport measurements, bathymetric surveys and shoreline evolution assessments were used to investigate annual and seasonal patterns of dune development on Sfântu Gheorghe beach, the Danube delta coast, from 1997 to 2004. Dune volume increased consistently (1.96 m3 m− 1 y− 1 to 5.1 m3 m− 1 y− 1) over this 7-year period with higher rates in the southward (downdrift) direction. Dune aggradation is periodically limited by storms, each of which marks a new evolutionary phase of the beach–dune system. As a consequence of the variable beach morphology and vegetation density during a year, foredune growth occurs during the April–December interval while between December and April a slightly erosive tendency is present. The pattern of erosion and deposition shown by the topographical surveys is in good agreement with the sand transport measurements and demonstrates the presence of a vigorous sand flux over the foredunes which is 20–50% smaller than on the beach. This high sand flux, due to low precipitation and sparse vegetation cover, creates an aerodynamically efficient morphology on the seaward dune slope. The seaward dune face accretes during low to medium onshore winds (5.5–12 m s− 1) and erodes during high winds (> 12 m s− 1).  相似文献   

17.
Shrub fertile islands are a common feature in arid ecosystems. To examine the effect of plant species on the spatial patterns of soil chemical and physical properties surrounding individual shrubs, two deciduous shrub species with different morphologies (Tamarix spp. and Haloxylon ammodendron Bge.) were studied at an oasis–desert ecotone in South Junggar Basin. Soil samples were collected under the shrub crown (canopy), at the vertically projected limit of shrub crown margin (periphery), and in the space between shrub crowns (interspace) at two depths, 0–10 and 10–20 cm, to analyze their physical and chemical properties. The results show that the fertile islands of Tamarix spp. are enriched with more soil nutrients (significantly higher, P<0.05; soil organic matter (SOM); total nitrogen (TN) and available nitrogen (AN); to a deeper depth (>20 cm) and in a larger area (beyond the canopied area) compared to that of H. ammodendron (significantly higher, P<0.05, soil nutrients detected only for AN; <20 cm in depth; smaller than the canopied area). Soil texture patterns surrounding the shrubs of the two species are even more different, with more coarse particles under the Tamarix spp. canopies compared to the interspace between shrubs but fewer under the H. ammodendron canopies compared to the interspaces. These variations are attributed to the difference in morphology of the two studied species: the Y-shaped crowns of H. ammodendron are less capable of capturing and maintaining litter under them than the hemispheroidal crowns of Tamarix spp., which leads to the less well developed fertile islands surrounding H. ammodendron shrubs.  相似文献   

18.
《Geomorphology》2007,83(1-2):82-96
The segmenting of gravel-bed rivers flowing through mountain valleys into a number of discrete ‘sedimentary links’, each characterized by downstream fining of alluvium, is a relatively recent concept which offers promise to model the large-scale spatial organisation of many types of aquatic habitat (reproductive, feeding, refuge, etc), strongly dependent on dominant bed sediment calibre. Although, so far, the ecological application of the concept has mainly focused on benthic invertebrates, here we illustrate its application to fish (Atlantic salmon; Salmo salar). Moreover, the link concept has also been primarily applied to alpine river environments where link formation is triggered by point sources (mainly tributaries) supplying coarser sediment. However, somewhat lower relief, mountain valley landscapes of North Eastern Canada are often structured into sedimentary links triggered by non-point, ‘supply zones’ of coarse sediments, originating in bedrock canyon reaches or valley bottom deposits of glacial drift. Here, we propose an adaptation and extension of the original, sedimentary link concept to such landscapes and test its utility along one such system, the Ste Marguerite River (SMR), a salmon river draining the Canadian Shield in the Saguenay region of Québec. We first discuss a simple field and office based method of link delineation. Then we discuss potential sources of minor, sublink scale grain size variability and their effects on how sedimentary links are defined. Lastly, we demonstrate the usefulness of the link structure to model the distribution of Atlantic salmon spawning habitat (a habitat that depends critically on bed texture). Our results indicate that a revised sedimentary link typology is needed to describe longitudinal grain size patterns where non-point, valley-segment scale sources of coarse sediment are important and that consideration of the research purpose and scale is important in defining meaningful link units. We also show that salmon spawning zones can be directly predicted from the link structure: along the SMR, spawning activity is apportioned within each of the discrete links, in those sub-zones where surface sediment size and sand content are optimal for reproduction.  相似文献   

19.
We examine the morphology and dynamics features of the river channels within the basin of the lower reaches of the Amur river on spawning grounds. We report evidence that the spawning grounds tend to occur at definite elements of the river channel as well as data on particle-size composition of alluvial deposits in autumn chum salmon (keta) spawning stretches. Factors having a negative influence on the preservation of spawning grounds have been identified.  相似文献   

20.
Alpa Sridhar   《Geomorphology》2007,88(3-4):285-297
This paper attempts to quantify contemporary and palaeo-discharges and changes in the hydrologic regime through the mid–late Holocene in the alluvial reach of the arid Mahi River basin in western India. The occurrence of terraces and pointbars high above active river levels and change in the width/depth ratio can be regarded as geomorphic responses to changes in discharge. Discharge estimates are made based on the channel dimensions and established empirical relations for the three types of channels: mid–late Holocene, historic (the channel that deposited extensive pointbars above the present-day average flow level) and the present ones. The bankfull discharge of the mid–late Holocene channel was  55 000 m3 s− 1 and that of the historic channel was  9500 m3 s− 1, some  25 times and  5 times greater than that of the present river (2000 m3 s− 1), respectively. Since the mid–late Holocene, the channel form has changed from wide, large-amplitude meanders to smaller meanders, and decreases in the width/depth ratio, unit stream power and the bed shear stresses have occurred. It can be inferred that there has been a trend of decreasing precipitation since the mid–late Holocene.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号