首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 328 毫秒
1.
We propose an improvement of the overland‐flow parameterization in a distributed hydrological model, which uses a constant horizontal grid resolution and employs the kinematic wave approximation for both hillslope and river channel flow. The standard parameterization lacks any channel flow characteristics for rivers, which results in reduced river flow velocities for streams narrower than the horizontal grid resolution. Moreover, the surface areas, through which these wider model rivers may exchange water with the subsurface, are larger than the real river channels potentially leading to unrealistic vertical flows. We propose an approximation of the subscale channel flow by scaling Manning's roughness in the kinematic wave formulation via a relationship between river width and grid cell size, following a simplified version of the Barré de Saint‐Venant equations (Manning–Strickler equations). The too large exchange areas between model rivers and the subsurface are compensated by a grid resolution‐dependent scaling of the infiltration/exfiltration rate across river beds. We test both scaling approaches in the integrated hydrological model ParFlow. An empirical relation is used for estimating the true river width from the mean annual discharge. Our simulations show that the scaling of the roughness coefficient and the hydraulic conductivity effectively corrects overland flow velocities calculated on the coarse grid leading to a better representation of flood waves in the river channels.  相似文献   

2.
The Xinanjiang model, which is a conceptual rainfall‐runoff model and has been successfully and widely applied in humid and semi‐humid regions in China, is coupled by the physically based kinematic wave method based on a digital drainage network. The kinematic wave Xinanjiang model (KWXAJ) uses topography and land use data to simulate runoff and overland flow routing. For the modelling, the catchment is subdivided into numerous hillslopes and consists of a raster grid of flow vectors that define the water flow directions. The Xinanjiang model simulates the runoff yield in each grid cell, and the kinematic wave approach is then applied to a ranked raster network. The grid‐based rainfall‐runoff model was applied to simulate basin‐scale water discharge from an 805‐km2 catchment of the Huaihe River, China. Rainfall and discharge records were available for the years 1984, 1985, 1987, 1998 and 1999. Eight flood events were used to calibrate the model's parameters and three other flood events were used to validate the grid‐based rainfall‐runoff model. A Manning's roughness via a linear flood depth relationship was suggested in this paper for improving flood forecasting. The calibration and validation results show that this model works well. A sensitivity analysis was further performed to evaluate the variation of topography (hillslopes) and land use parameters on catchment discharge. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

3.
This study presents a Geographic Information System (GIS)‐based distributed rainfall‐runoff model for simulating surface flows in small to large watersheds during isolated storm events. The model takes into account the amount of interception storage to be filled using a modified Merriam ( 1960 ) approach before estimating infiltration by the Smith and Parlange ( 1978 ) method. The mechanics of overland and channel flow are modelled by the kinematic wave approximation of the Saint Venant equations which are then numerically solved by the weighted four‐point implicit finite difference method. In this modelling the watershed was discretized into overland planes and channels using the algorithms proposed by Garbrecht and Martz ( 1999 ). The model code was first validated by comparing the model output with an analytical solution for a hypothetical plane. Then the model was tested in a medium‐sized semi‐forested watershed of Pathri Rao located in the Shivalik ranges of the Garhwal Himalayas, India. Initially, a local sensitivity analysis was performed to identify the parameters to which the model outputs like runoff volume, peak flow and time to peak flow are sensitive. Before going for model validation, calibration was performed using the Ordered‐Physics‐based Parameter Adjustment (OPPA) method. The proposed Physically Based Distributed (PBD) model was then evaluated both at the watershed outlet as well as at the internal gauging station, making this study a first of its kind in Indian watersheds. The results of performance evaluation indicate that the model has simulated the runoff hydrographs reasonably well within the watershed as well as at the watershed outlet with the same set of calibrated parameters. The model also simulates, realistically, the temporal variation of the spatial distribution of runoff over the watershed and the same has been illustrated graphically. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

4.
Two distributed parameter models, a one‐dimensional (1D) model and a two‐dimensional (2D) model, are developed to simulate overland flow in two small semiarid shrubland watersheds in the Jornada basin, southern New Mexico. The models are event‐based and represent each watershed by an array of 1‐m2 cells, in which the cell size is approximately equal to the average area of the shrubs. Each model uses only six parameters, for which values are obtained from field surveys and rainfall simulation experiments. In the 1D model, flow volumes through a fixed network are computed by a simple finite‐difference solution to the 1D kinematic wave equation. In the 2D model, flow directions and volumes are computed by a second‐order predictor–corrector finite‐difference solution to the 2D kinematic wave equation, in which flow routing is implicit and may vary in response to flow conditions. The models are compared in terms of the runoff hydrograph and the spatial distribution of runoff. The simulation results suggest that both the 1D and the 2D models have much to offer as tools for the large‐scale study of overland flow. Because it is based on a fixed flow network, the 1D model is better suited to the study of runoff due to individual rainfall events, whereas the 2D model may, with further development, be used to study both runoff and erosion during multiple rainfall events in which the dynamic nature of the terrain becomes an important consideration. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

5.
Effective control of nonpoint source pollution from contaminants transported by runoff requires information about the source areas of surface runoff. Variable source hydrology is widely recognized by hydrologists, yet few methods exist for identifying the saturated areas that generate most runoff in humid regions. The Soil Moisture Routing model is a daily water balance model that simulates the hydrology for watersheds with shallow sloping soils. The model combines elevation, soil, and land use data within the geographic information system GRASS, and predicts the spatial distribution of soil moisture, evapotranspiration, saturation‐excess overland flow (i.e., surface runoff), and interflow throughout a watershed. The model was applied to a 170 hectare watershed in the Catskills region of New York State and observed stream flow hydrographs and soil moisture measurements were compared to model predictions. Stream flow prediction during non‐winter periods generally agreed with measured flow resulting in an average r2 of 0·73, a standard error of 0·01 m3/s, and an average Nash‐Sutcliffe efficiency R2 of 0·62. Soil moisture predictions showed trends similar to observations with errors on the order of the standard error of measurements. The model results were most accurate for non‐winter conditions. The model is currently used for making management decisions for reducing non‐point source pollution from manure spread fields in the Catskill watersheds which supply New York City's drinking water. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

6.
Soil erosion by water is the root cause of ecological degradation in the Shiwalik foothills of Northern India. Simulation of runoff and its component processes is a pre‐requisite to develop the management strategies to tackle the problem, successfully. A two‐dimensional physically based distributed numerical model, ROMO2D has been developed to simulate runoff from small agricultural watersheds on an event basis. The model employs the 2‐D Richards equation with sink term to simulate infiltration and soil moisture dynamics in the vadoze zone under variable rainfall conditions, and 2‐D Saint‐Venant equations under the kinematic wave approximation along with Manning's equation as the stage‐discharge equation for runoff routing. The various flow‐governing equations have been solved numerically by employing a Galerkin finite element method for spatial discretization using quadrilateral elements and finite difference techniques for temporal solutions. The ROMO2D computer program has been developed as a class‐based program, coded in C + + in such a way that with minor modifications, the model can be used to simulate runoff on a continuous basis. The model writes output for a runoff hydrograph of each storm. Model development is described in this paper and the results of model testing and field application are to be presented in a subsequent paper. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

7.
The processes of hillslope runoff and erosion are typically represented at coarse spatial resolution in catchment‐scale models due to computational limitations. Such representation typically fails to incorporate the important effects of topographic heterogeneity on runoff generation, overland flow, and soil erosion. These limitations currently undermine the application of distributed catchment models to understand the importance of thresholds and connectivity on hillslope and catchment‐scale runoff and erosion, particularly in semi‐arid environments. This paper presents a method for incorporating high‐resolution topographic data to improve sub‐grid scale parameterization of hillslope overland flow and erosion models. Results derived from simulations conducted using a kinematic wave overland flow model at 0.5 m spatial resolution are used to parameterize the depth–discharge relationship in the overland flow model when applied at 16 m resolution. The high‐resolution simulations are also used to derive a more realistic parameterization of excess flow shear stress for use in the 16 m resolution erosion model. Incorporating the sub‐grid scale parameterization in the coarse‐resolution model (16 m) leads to improved predictions of overland flow and erosion when evaluated using results derived from high‐resolution (0.5 m) model simulations. The improvement in performance is observed for a range of event magnitudes and is most notable for erosion estimates due to the non‐linear dependency between the rates of erosion and overland flow. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

8.
The paper focusses on connectivity in the context of infiltration‐excess overland flow and its integrated response as slope‐base overland flow hydrographs. Overland flow is simulated on a sloping surface with some minor topographic expression and spatially differing infiltration rates. In each cell of a 128 × 128 grid, water from upslope is combined with incident rainfall to generate local overland flow, which is stochastically routed downslope, partitioning the flow between downslope neighbours. Simulations show the evolution of connectivity during simple storms. As a first approximation, total storm runoff is similar everywhere, discharge increasing proportionally with drainage area. Moderate differences in plan topography appear to have only a second‐order impact on hydrograph form and runoff amount. Total storm response is expressed as total runoff, runoff coefficient or total volume infiltrated; each plotted against total storm rainfall, and allowing variations in average gradient, overland flow roughness, infiltration rate and storm duration. A one‐parameter algebraic expression is proposed that fits simulation results for total runoff, has appropriate asymptotic behaviour and responds rationally to the variables tested. Slope length is seen to influence connectivity, expressed as a scale distance that increases with storm magnitude and can be explicitly incorporated into the expression to indicate runoff response to simple events as a function of storm size, storm duration, slope length and gradient. The model has also been applied to a 10‐year rainfall record, using both hourly and daily time steps, and the implications explored for coarser scale models. Initial trails incorporating erosion continuously update topography and suggest that successive storms produce an initial increase in erosion as rilling develops, while runoff totals are only slightly modified. Other factors not yet considered include the dynamics of soil crusting and vegetation growth. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

9.
不同尺度流域地表径流氮、磷浓度比较   总被引：18，自引：2，他引：16  
选择太湖上游为研究对象,采集了1-400 km2不同尺度小流域产出径流TN、TP浓度实测数据,结合前期开展的地表坡面流人工暴雨实验监测结果,开展不同尺度流域水质监测对水体面源污染产出浓度估算影响的比较研究,探讨流域尺度之间入渗、汇流以及伴随的流域生态系统营养盐调节机制的差异．结果表明,流域监测尺度对土地利用面源污染产出浓度估算有较大影响．地表坡面流由于未经过流域汇流过程伴随的下渗滤过与吸附等过程,产出径流TN、TP浓度一般高于小流域．小流域林地生态系统具有较强的入渗机制、接近自然的生态沟谷汇流网络,对面源污染TN、TP有较强的削减作用．农业生态系统较弱的入渗机制、人工沟渠汇流网络对面源污染TN、TP的削减作用较弱．现代农业造成流域面源污染增加不仅仅是因为人类农业活动对流域局部土体及养分的改变,农业生态系统改变流域自然生态系统整体水文过程及营养盐调节机制也是面源污染增加的重要因素之一,恢复小尺度的生态沟谷网络系统对削减流域面源污染具有重要的意义．  相似文献   

10.
Infiltration excess overland flow has been identified as the dominant flow pathway in recently reclaimed surface mined watersheds as a result of compaction and sorting during the reclamation procedure. Therefore, there could be a fairly direct relationship between runoff generated from the hillslopes to that measured at the watershed outlet. A 3‐year study was initiated in 1993 to determine how well surface runoff at a watershed scale could be predicted from 1‐m2 runoff frames placed on hillslopes in two reclaimed surface‐mined watersheds in central Alberta. Runoff from the hillslope frames suggests outlet discharge should be high from the 3\4‐ha Sandy Subsoil Watershed and much less for the 9\8‐ha West Watershed, but the opposite occurred. Most of the hillslope runoff from the Sandy Subsoil Watershed infiltrated once it reached the channel and depression storage played an insignificant role in determining runoff. In contrast, most of the runoff from the West Watershed originated from rain falling directly on the saturated channel (depression storage) or near‐channel saturated areas, rather than the hillslopes. Neither watershed runoff magnitude nor timing could be predicted from the same parameters for hillslope runoff frames for either reclaimed watershed. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

11.
Distributed, continuous hydrologic models promote better understanding of hydrology and enable integrated hydrologic analyses by providing a more detailed picture of water transport processes across the varying landscape. However, such models are not widely used in routine modelling practices, due in part to the extensive data input requirements, computational demands, and complexity of routing algorithms. We developed a two‐dimensional continuous hydrologic model, HYSTAR, using a time‐area method within a grid‐based spatial data model with the goal of providing an alternative way to simulate spatiotemporally varied watershed‐scale hydrologic processes. The model calculates the direct runoff hydrograph by coupling a time‐area routing scheme with a dynamic rainfall excess sub‐model implemented here using a modified curve number method with an hourly time step, explicitly considering downstream ‘reinfiltration’ of routed surface runoff. Soil moisture content is determined at each time interval based on a water balance equation, and overland and channel runoff is routed on time‐area maps, representing spatial variation in hydraulic characteristics for each time interval in a storm event. Simulating runoff hydrographs does not depend on unit hydrograph theory or on solution of the Saint Venant equation, yet retains the simplicity of a unit hydrograph approach and the capability of explicitly simulating two‐dimensional flow routing. The model provided acceptable performance in predicting daily and monthly runoff for a 6‐year period for a watershed in Virginia (USA) using readily available geographic information about the watershed landscape. Spatial and temporal variability in simulated effective runoff depth and time area maps dynamically show the areas of the watershed contributing to the direct runoff hydrograph at the outlet over time, consistent with the variable source area overland flow generation mechanism. The model offers a way to simulate watershed processes and runoff hydrographs using the time‐area method, providing a simple, efficient, and sound framework that explicitly represents mechanisms of spatially and temporally varied hydrologic processes. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

12.
A simple model describing the transformation of effective rainfall to direct runoff through the overland flow mechanism is presented. The model is based on the classical representation of a watershed by a combination of planes and channels. The dynamics of overland flow in each plane is simulated by the non-linear kinematic wave, but the outflow from a given plane is concentrated in the middle of the corresponding drainage channel. The water routing in the channels is carried out by a piece-wise linearized formulation in space of the kinematic wave approximation. Using synthetic events on 10 watersheds, the model was tested by comparing it with results obtained by applying the non-linear kinematic wave to all the elements of the watershed. The model was found to be adequate, even in a form that simplifies the geometric features of the planes through an averaging procedure based on the Horton–Strahler ordering scheme of the watershed. © 1998 John Wiley & Sons, Ltd.  相似文献   

13.
There is global concern about headwater management and associated impacts on river flow. In many wet temperate zones peatlands can be found covering headwater catchments. In the UK there is major concern about how environmental change, driven by human interventions, has altered the surface cover of headwater blanket peatlands. However, the impact of such land‐cover changes on river flow is poorly understood. In particular, there is poor understanding of the impacts of different spatial configurations of bare peat or well‐vegetated, restored peat on river flow peaks in upland catchments. In this paper, a physically based, distributed and continuous catchment hydrological model was developed to explore such impacts. The original TOPMODEL, with its process representation being suitable for blanket peat catchments, was utilized as a prototype acting as the basis for the new model. The equations were downscaled from the catchment level to the cell level. The runoff produced by each cell is divided into subsurface flow and saturation‐excess overland flow before an overland flow calculation takes place. A new overland flow module with a set of detailed stochastic algorithms representing overland flow routing and re‐infiltration mechanisms was created to simulate saturation‐excess overland flow movement. The new model was tested in the Trout Beck catchment of the North Pennines of England and found to work well in this catchment. The influence of land cover on surface roughness could be explicitly represented in the model and the model was found to be sensitive to land cover. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

14.
A hydrologic model for urban areas has been developed which incorporates distributed parameter modelling concepts and functions in the context of a geographic information system. In the proposed model, the watershed is represented as a cascade of grid cells, whose size can be specified by the user. Preliminary processing includes the determination of overland flow directions for each cell. An automated procedure is used to establish the cell-to-cell connectivity scheme, which is used to order the computations within each time step. Infiltration is computed using the Green-Ampt equation, while runoff rates are computed using a coupling of the continuity equation and Manning's equation for turbulent flow. Storm sewer flows are routed using time-shift routing. The model is capable of simulating flow through streets and offers the possibility of predicting the downstream movement of sewer system overflows. In preliminary testing on a small residential watershed, the model was able to reproduce measured hydrographs.  相似文献   

15.
This paper describes the results of benchmark testing of land use change impact on direct runoff using Soil Conservation Service-Curve Number (SCS-CN) model in two ungauged neighbouring urban watersheds (Çınar and Kadıyakuplu) in Istanbul, Turkey. To examine this impact, the model was applied to daily rainfall data using three different dated (1982, 1996 and 2012) hydrological soil groups and land use of the two ungauged urban watersheds. Finally, the impact of land use change and model performance were evaluated with the rainfall-runoff regression, the coefficient of determination and the NSE test using benchmark runoff data based on 1982 land use conditions. The results of the analysis indicate that the changing of land use types from natural surfaces to impervious surfaces has a significant impact on surface runoff. Additionally, remarkable spatial variations of the land use changes and their impact on the runoff in 1996 and 2012 were more detected in the Çınar watershed compared with the Kadıyakuplu watershed. The planning decision on land use of the watersheds, has vital role in these differences. The results of this research also reveal that change to intensive land use in urban watersheds has a significantly larger impact on runoff generation than those rainfall.  相似文献   

16.
Simulation of watershed scale hydrologic and water quality processes is important for watershed assessments. Proper characterization of the accuracy of these simulations, particularly in cases with limited observed data, is critical. The Soil & Water Assessment Tool (SWAT) is frequently used for watershed scale simulation. The accuracy of the model was assessed by extrapolating calibration results from a well studied Coastal Plain watershed in Southwest Georgia, USA, to watersheds within the same geographic region without further calibration. SWAT was calibrated and validated on a 16.7‐km2 subwatershed within the Little River Experimental Watershed by varying six model parameters. The optimized parameter set was then applied to a watershed of similar land use and soils, a smaller watershed with different land use and soils and three larger watersheds within the same drainage system without further calibration. Simulation results with percent bias (PB) ±15% ≤ PB < ±25% and Nash–Sutcliffe efficiency (NSE) 0.50 < NSE ≤ 0.65 were considered to be satisfactory, whereas those with PB < ±10% and 0.75 < NSE ≤ 1.00 were considered very good. With these criteria, simulation results for the five non‐calibration watersheds were satisfactory to very good. Differences across watersheds were attributed to differences in soils, land use, and surficial aquifer characteristics. These results indicate that SWAT can be a useful tool for predicting streamflow for ungauged watersheds with similar physical characteristics to the calibration watershed studied here and provide an indication of the accuracy of hydrologic simulations for ungauged watersheds. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

17.
Fire is an important and natural process in the lifecycle of chaparral systems, removing old growth and recycling nutrients. Recent catastrophic wildfires in southern California chaparral have heightened concerns about increased runoff and nutrient export. The goal of this study was to improve understanding of how overland flow is generated in unburned and post‐fire chaparral watersheds. Samples of overland flow were collected from burned and unburned watersheds after rainfall events and multiple regression analysis was used to examine the influence of individual storm characteristics and system moisture on overland flow volume. The results indicate that variation in overland flow generation in the unburned watershed is best explained by storm size, while overland flow in the burned watershed was positively related to storm size and time between storms. These findings suggest that the burned system had decreased infiltration rates and increased soil water repellency. In contrast, there is a statistically significant negative relationship between overland flow 1 year after a fire against different system and precipitation factors revealed a negative correlation with drying period and a positive relationship with rainfall intensity, a combination that suggests reduced repellency. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

18.
  相似文献   

19.
A number of watershed‐scale hydrological models include Richards' equation (RE) solutions, but the literature is sparse on information as to the appropriate application of RE at the watershed scale. In most published applications of RE in distributed watershed‐scale hydrological modelling, coarse vertical resolutions are used to decrease the computational burden. Compared to point‐ or field‐scale studies, application at the watershed scale is complicated by diverse runoff production mechanisms, groundwater effects on runoff production, runon phenomena and heterogeneous watershed characteristics. An essential element of the numerical solution of RE is that the solution converges as the spatial resolution increases. Spatial convergence studies can be used to identify the proper resolution that accurately describes the solution with maximum computational efficiency, when using physically realistic parameter values. In this study, spatial convergence studies are conducted using the two‐dimensional, distributed‐parameter, gridded surface subsurface hydrological analysis (GSSHA) model, which solves RE to simulate vadose zone fluxes. Tests to determine if the required discretization is strongly a function of dominant runoff production mechanism are conducted using data from two very different watersheds, the Hortonian Goodwin Creek Experimental Watershed and the non‐Hortonian Muddy Brook watershed. Total infiltration, stream flow and evapotranspiration for the entire simulation period are used to compute comparison statistics. The influences of upper and lower boundary conditions on the solution accuracy are also explored. Results indicate that to simulate hydrological fluxes accurately at both watersheds small vertical cell sizes, of the order of 1 cm, are required near the soil surface, but not throughout the soil column. The appropriate choice of approximations for calculating the near soil‐surface unsaturated hydraulic conductivity can yield modest increases in the required cell size. Results for both watersheds are quite similar, even though the soils and runoff production mechanisms differ greatly between the two catchments. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

20.
This study integrates a simple overland flow module (isochronous cells model) with the river module of MODFLOW such that temporal and spatial interactions between stream flow and groundwater can be simulated using net rainfall data of a watershed. The isochronous cells model is an efficient travel time runoff approach based on geographic information system (GIS) that considers both spatial and temporal variations of net rainfall through hill slope of the watershed. This overland module is easily coupled with MODFLOW river routing module. Specifically, the stream flow from the isochronous cells model is directly assigned to both sides of river cells of the MODFLOW model. Such an integration of MODFLOW and isochronous cells model is especially useful in watersheds where river flow data are limited. The feasibility of this integrated model was demonstrated using a case study in the middle and downstream regions of the Yitong River watershed, China. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号