首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 359 毫秒
1.
Brittle fractures were observed at the welded beam‐to‐column connections of a number of steel moment frame buildings following the M6.7 1994 Northridge earthquake. Such fractures cause a rapid loss of connection strength and stiffness, as well as a sudden release of the strain energy stored by the connection at the time of fracture. Immediately following the fracture, a number of highly transient phenomena occur locally in the members adjacent to the connection, as well as globally in the structure as a whole. Four significant local phenomena were observed locally during shaking table tests of a one‐third scale, two‐story, one‐bay steel moment frame in which quasi‐brittle beam‐to‐column fractures occurred: (a) change in beam deflected shape; (b) change in moment distribution in adjacent members; (c) generation and propagation of elastic waves; and (d) initiation of dynamic modal response at the member level. Owing to the highly transient nature of these phenomena, they were observed to have second‐order effects on overall behavior of the system. In comparison, the reductions in local strength and stiffness caused by the fractures had much more significant effects on system behavior. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

2.
A simplified fatigue-life model is proposed for assessing the seismic inelastic rotational capacity of steel connections. First relations are developed for rigid steel connections under lateral loading. Next this is extended to account for the effects of the welded steel moment frame (WSMF) connections of the so-called pre-Northridge type. The seismic fatigue theory is validated against experimental results. The experiments were conducted under increasing ductility amplitudcs until the onset of fracture. Miner‘ rule was used to convert the test results to given an equivalent constant amplitude cyclic fatigue life. Satisfactory agreement is obtained when comparing the experimental observations with the theoretical predictions.  相似文献   

3.
A MW6.4 earthquake occurred in L'Aquila, central Italy at 1:32:42 (UTC), April 6, 2009. We quickly obtained the moment tensor solution of the earthquake by inverting the P waveforms of broadband recordings from the global seismographic network (GSN) stations using the quick technique of moment tensor inversion, and further inferred that the nodal plane of strike 132°, dip 53° and rake ?103° is the seismogenic fault.  相似文献   

4.
A novel type of angle steel buckling‐restrained brace (ABRB) has been developed for easier control on initial geometric imperfection in the core, more design flexibility in the buckling restraining mechanism and easier assembly work. The steel core is composed of four angle steels to form a non‐welded cruciform shape restrained by two external angle steels, which are welded longitudinally to form an external tube. Component test was conducted on seven ABRB specimens under uniaxial quasi‐static cyclic loading. The test results reveal that the consistency between the actual and design behavior of ABRB can be well achieved without the effect of weld in the core. The ABRBs with proper details exhibited stable cyclic behavior and satisfactory cumulative plastic ductility capacity, so that they can serve as effective hysteretic dampers. However, compression–flexure failure at the steel core projection was found to be the primary failure mode for the ABRBs with hinge connections even though the cross‐section of the core projection was reinforced two times that of the yielding segment. The failure mechanism is further discussed by investigating the Nu– Mu correlation curve. It is found that the bending moment response developed in the core projection induced by end rotation was the main cause for such a failure mode, and it is suggested that core projection should be kept within elastic stage under the possible maximum axial load and bending moment response. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

5.
An assessment of seismic demands and capacities of welded column splice (WCS) connections in steel moment frames is presented. For demand assessment, nonlinear dynamic analyses are conducted for two case‐study buildings, that is, a 4‐story and a 20‐story moment frame. Results from the nonlinear dynamic analyses are assessed through a probabilistic seismic demand analysis (PSDA) framework to characterize recurrence rates of longitudinal flange stress in these connections. The PSDA is applied in two contexts. First, in the context of WCS connections constructed prior to the M 6.7 1994 Northridge earthquake, the PSDA is combined with sophisticated finite element‐based fracture mechanics analysis to compute the mean annual frequencies of fracture in these connections. The pre‐Northridge WCS are especially critical because they feature partial joint penetration and brittle materials that compromise their resistance to fracture. The analysis indicates that the mean annual frequencies of fracture in these connections may be unacceptably high for both the 4‐story and the 20‐story frames. This warrants a serious and urgent consideration of retrofit strategies. These findings are attributed to the brittleness of the pre‐Northridge splices (as indicated by the fracture mechanics simulations), as well as the force‐controlled nature of these components, wherein low‐intensity ground motions contribute disproportionately to fracture risk, as evidenced by fracture risk disaggregation. Second, in the context of new construction, the PSDA provides meaningful stress magnitudes for design. Currently, WCS connections employ complete joint penetration welds with the intent to develop the smaller column flange in yielding. The PSDA conducted in this study suggests that this requirement may be too stringent because stress demands in the splices corresponding even to high return periods (e.g., 2475 years) are significantly lower (~40 ksi), as compared with the stress required to yield the column (~55 ksi). Limitations of the study are outlined. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

6.
New steel moment‐resisting connections that incorporate post‐tensioning elements to provide a self‐centering capacity and devices to dissipate seismic input energy have recently been proposed and experimentally validated. Experimental studies have confirmed that these connections are capable of undergoing large lateral deformations with negligible residual drifts. To facilitate their implementation, accurate modeling of the behavior of systems incorporating post‐tensioned connections must be readily available to designers and researchers. A number of simplified models have been suggested in the literature by researchers trying to capture experimental results at the beam–column connections and thereby to predict the global response of structures incorporating such connections. To provide a clear set of guidelines for the modeling of post‐tensioned steel frames, for practicing engineers as well as researchers, in this paper three types of numerical models of increasing complexity are presented: (i) a sectional analysis procedure, (ii) a lumped plasticity spring frame leveled approach and (iii) a non‐linear solid finite element analysis to predict the response at ultimate deformation levels. The analytical results obtained from the numerical models predict well the structural behavior of these connections when compared with available experimental data. Even at the ultimate deformation level, analytical results are in good agreement with test results. Furthermore, detailing requirements are proposed to assure that flexural hinges form in the beams in order to improve the cyclic response of steel self‐centering connections when drifts exceeding the design drifts are imposed to the system. Experimental and analytical studies demonstrate that steel post‐tensioned self‐centering connections incorporating the proposed detailing in the beams develop an increased deformation capacity and thereby exhibit a ductile response while avoiding a sudden loss of their strength and stiffness. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

7.
The theoretical acceleration spectrum of observation site has been obtained from source acceleration spectrum derived from scaling law, using attenuation modelQ=Q ν f η . A comparison of a set of theoretical acceleration spectra with observation spectra has been made, and we have obtained the attenuation model for observation site and seismic moment magnitude. We obtain thatQ o=300,η=0.25 for Wuqia area, Xinjing Zizhizhou, and seismic moment magnitudes of 18 greater aftershocks of Wuqia earthquake occurred in 1985. In order to obtain seismic moment magnitued conveniently, three functional tables of acceleration spectra at 1Hz as the distances for variousQ value have been made. The seismic moment magnitude can be quickly measured from acceleration spectrum at 1Hz according to these tables (epicenter has to be known). The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,14, 435–445, 1992.  相似文献   

8.
The overturning fragilities of symmetric and asymmetric freestanding blocks, ranging in height from 0.54 to 3.6 m and with height‐to‐width ratios ranging from 2.1 to 6.6, are determined numerically. A probabilistic formulation regularizes the overturning responses when exposed to earthquake‐like random‐vibration waveforms. The peak amplitude of the forcing excitation (peak ground acceleration or PGA) is parameterized as a function of the block size, block shape, overturning probability, and either the PGA normalized peak ground velocity (PGV/PGA), spectral acceleration at 1 s (Sa(1)/PGA), or spectral acceleration at 2 s (Sa(2)/PGA). These later intensity measures are correlated with the duration of the predominant acceleration pulse. The overturning fragilities are compared with shake table experiments using blocks ranging in height from ～0.2 to 1.2 m and with height‐to‐width ratios ranging from ～2 to 10. Excitations utilized in the shake table experiments include recordings of the 1979 Imperial Valley, 1985 Michoacan, 1999 Duzce, 1999 Chi‐Chi, and 2002 Denali Earthquakes along with synthetic waveforms. The overturning fragilities accurately represent the overturning responses of blocks with simple basal contact conditions. Objects with multiple rocking points, such as precariously balanced rocks, are more fragile than predicted. Nondestructive tilting tests are used to account for blocks with complex basal contact conditions, demonstrating that these blocks overturn similarly to more slender blocks with simple contact conditions. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

9.
Love waves recorded by a long-period seismograph at New Delhi (NDI) from seven earthquakes of magnitude 4.3 to 5.2 in Koyna and Bhatsa on the western coast and one earthquake in Ongole on the eastern coast of the Indian Peninsula have been used to determine the seismic moment for each of the earthquakes by waveform modeling. Transverse component of the synthetic seismogram shows that the maximum amplitude of waveform decreases with an increase of source duration. Thus for an evaluation of the seismic moment by equating the amplitude level of the observed and synthetic waveforms, we must know the source duration. The synthetic seismogram also indicates that a short source duration gives rise to a small but sharp pulse and this pulse is interpreted as anLg wave. Comparison of the observed and synthetic waveforms has been used for a simultaneous evaluation of the source duration and seismic moment. The source durations are found to vary between 2.2 and 4.4 s; for earthquakes with a magnitude range between 4.3 and 5.2 these durations are slightly higher than normal. We obtain moment (M 0) of Ongole earthquake (M L =5.1)as 1.7×1024 dyne-cm; moments of Koyna and Bhatsa earthquakes (4.3M L 5.2) on the western coast lie between 0.7×1023 and 3.6×1023 dyne-cm. Moment (M 0)-magnitude (M L ) relation logM 0=1.5M L +16.0 for the western United States region agrees as well, in general, with the results for the earthquakes in the Indian Peninsula.  相似文献   

10.
In this paper, vertical peak floor acceleration (PFAv) demands on elastic multistory buildings are statistically evaluated using recorded ground motions. These demands are applicable to the assessment of nonstructural components that are rigid in the vertical direction and located at column lines or next to columns. Hence, PFAv demands of the floor system away from column lines and their effects on nonstructural components are not addressed. This study is motivated by the questionable general assumption that typical buildings are considered to be relatively flexible in the horizontal (lateral) direction but relatively rigid in the vertical (longitudinal) direction. Consequently, only few papers address the evaluation of vertical component acceleration demands throughout a building, and there is no consensus on the relevance of vertical accelerations in buildings. The results presented in this study show that the vertical ground acceleration demands are amplified throughout the column line of a steel frame structure. This amplification is in many cases significant, depending on the vertical stiffness of the load‐bearing system, damping ratio, and the location of the nonstructural component in the building. From these outcomes it can be concluded that the perception of a rigid‐body response of the column lines in the vertical direction is highly questionable, and further research on this topic is required. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

11.
This paper investigates the performance of spectral acceleration averaged over a period range (Saavg) as an intensity measure (IM) for estimating the collapse risk of structures subjected to earthquake loading. The performance of Saavg is evaluated using the following criteria: efficiency, sufficiency, the availability or ease of developing probabilistic seismic hazard information in terms of the IM and the variability of collapse risk estimates produced by the IM. Comparisons are also made between Saavg and the more traditional IM: spectral acceleration at the first‐mode period of the structure (Sa(T1)). Though most previous studies have evaluated IMs using a relatively limited set of structures, this paper considers nearly 700 moment‐resisting frame and shear wall structures of various heights to compare the efficiency and sufficiency of the IMs. The collapse risk estimates produced by Saavg and Sa(T1) are also compared, and the variability of the risk estimates is evaluated when different ground motion sets are used to assess the structural response. The results of this paper suggest that Saavg, when computed using an appropriate period range, is generally more efficient, more likely to be sufficient and provides more stable collapse risk estimates than Sa(T1). Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

12.
The seismic responses of steel buildings with perimeter moment resisting frames (MRF) with welded connections (WC) are estimated and compared to those of similar buildings with semi-rigid post-tensioned connections (PC). The responses are estimated in terms of ductility reduction factors (R µ,), ductility demands (µ G ) and force reduction factors (R). Two steel model buildings, which were modeled as complex-3D-MDOF systems, were used in the study. Results indicate that the reduction magnitude of global response parameters is larger than that of local response parameters, contradicting the same reduction implicitly assumed in the static equivalent lateral force procedure, implying that non-conservative design may result. The value of 8 for R, suggested in many codes for ductile steel MRF, and the value of 1 suggested in the well known Newmark and Hall procedure for the ratio of R to µ G , cannot be justified. The reason for this is that SDOF systems were used to model actual structures, where higher mode effects, energy dissipation and structural overstrength weren’t explicitly considered. The codes should be more transparent regarding the magnitude and the components involved in the force reduction factors. The seismic performance of steel buildings with PC may be superior to that of the buildings with WC, since their force reduction factors are larger and their ductility demands smaller, implying that PC buildings could be designed for smaller lateral seismic forces. The conclusions of this paper are for the particular structural systems and models considered. Much more research is needed to reach more general conclusions.  相似文献   

13.
The test results described in Part 1 of this paper （Lee and Bruneau, 2008） on twelve steel built-up laced members （BLMs） subjected to quasi-static loading are analyzed to provide better knowledge on their seismic behavior. Strength capacity of the BLM specimens is correlated with the strength predicted by the AISC LRFD Specifications. Assessments of hysteretic properties such as ductility capacity, energy dissipation capacity, and strength degradation after buckling of the specimen are performed. The compressive strength of BLMs is found to be relatively well predicted by the AISC LRFD Specifications. BLMs with smaller kl/r were ductile but failed to reach the target ductility of 3.0 before starting to fracture, while those with larger kl/r could meet the ductility demand in most cases. The normalized energy dissipation ratio, EC/ET and the normalized compressive strength degradation, Cr″/Cr of BLMs typically decrease as normalized displacements δ/δb,exp increase, and the ratios for specimens with larger kl/r dropped more rapidly than for specimens with smaller kl/r; similar trends were observed for the monolithic braces. The BLMs with a smaller slenderness ratio, kl/r, and width-to-thickness ratio, b/t, experienced a larger number of inelastic cycles than those with larger ratios.  相似文献   

14.
A refined probabilistic assessment of seismic demands and fracture capacity of welded column splice (WCS) connections in welded steel moment resisting frames (WSMRFs) is presented. Seismic demand assessment is performed through cloud-based nonlinear time history analysis (NLTHA) for two case-study structures, i.e., a 4- and a 20- story WSMRFs. Results from NLTHA are used to derive fracture fragility of WCS connections. To this aim, the study investigates (1) optimal ground-motion intensity measures for conditioning probabilistic seismic demand models in terms of global (i.e., maximum inter-story drift ratio) and local (i.e., peak tensile stress in the flange of WCSs) engineering demand parameters of WSMRFs; (2) the effect of ground-motion vertical components on the longitudinal flange stress of WCS connections and their resulting fracture fragility; and (3) the effect of WCS capacity uncertainties on the fracture fragility estimates of those connections. For the latter case, an advanced finite element fracture mechanics-based approach proposed by the authors is employed to capture aleatory and epistemic uncertainties affecting fracture capacities. The focus is on pre-Northridge WCS connections featuring partial joint penetration and brittle materials, making them highly vulnerable to seismic fracture. Fracture fragility results for the case-study structures are compared and discussed, highlighting the importance of the considered issues on fragility estimates, particularly in the case of high-rise structures. Findings from the study contribute shedding some light on the influence of seismic demand and capacity uncertainties on the assessment of fracture fragility of WCS connections. These findings can guide similar performance-based assessment exercises for WSMRFs to inform, for instance, the planning and design of retrofitting strategies for those vulnerable connections.  相似文献   

15.
Moment connections in an existing steel building located in Kaohsiung, Taiwan were rehabilitated to satisfy seismic requirements based on the 2005 AISC seismic provisions. Construction of the building was ceased in 1996 due to financial difficulties and was recommenced in 2007 with enhanced connection performance. Steel moment connections in the existing building were constructed by groove welding the beam flanges and bolting the beam web to the column. Four moment connections, two from the existing steel building, were cyclically tested. A non‐rehabilitated moment connection with bolted web‐welded flanges was tested as a benchmark. Three moment connections rehabilitated by welding full‐depth side plates between the column face and beam flange inner side were tested to validate the rehabilitation performance. Test results revealed that (1) the non‐rehabilitated existing moment connection made by in situ welding process prior to 1996 had similar deformation capacity as contemporary connection specimens made by laboratory welding process, (2) all rehabilitated moment connections exhibited excellent performance, exceeding a 4% drift without fractures of beam flange groove‐welded joints, and (3) presence of the full‐depth side plates effectively reduced beam flange tensile strain near the column face by almost half compared with the non‐rehabilitated moment connection. The connection specimens were also modeled using the non‐linear finite element computer program ABAQUS to further confirm the effectiveness of the side plate in transferring beam moments to the column and to investigate potential sources of connection failure. A design procedure was made based on experimental and analytical studies. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

16.
This paper investigates the effect of the gravity framing system on the overstrength and collapse risk of steel frame buildings with perimeter special moment frames (SMFs) designed in North America. A nonlinear analytical model that simulates the pinched hysteretic response of typical shear tab connections is calibrated with past experimental data. The proposed modeling approach is implemented into nonlinear analytical models of archetype steel buildings with different heights. It is found that when the gravity framing is considered as part of the analytical model, the overall base shear strength of steel frame buildings with perimeter SMFs could be 50% larger than that of the bare SMFs. This is attributed to the gravity framing as well as the composite action provided by the concrete slab. The same analytical models (i) achieve a static overstrength factor, Ωs larger than 3.0 and (ii) pass the collapse risk evaluation criteria by FEMA P695 regardless of the assigned total system uncertainty. However, when more precise collapse metrics are considered for collapse risk assessment of steel frame buildings with perimeter SMFs, a tolerable probability of collapse is only achieved in a return period of 50 years when the perimeter SMFs of mid‐rise steel buildings are designed with a strong‐column/weak‐beam ratio larger than 1.5. The concept of the dynamic overstrength, Ωd is introduced that captures the inelastic force redistribution due to dynamic loading. Steel frame buildings with perimeter SMFs achieve a Ωd > 3 regardless if the gravity framing is considered as part of the nonlinear analytical model representation. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

17.
Ten full-scale steel beam-to-column moment connections used in moment-resisting frames （MRFs） were tested to study the failure process, failure mode, strength and plastic rotation capacity. The specimens include one traditional welded flange-bolted web connection, one traditional fully welded connection, four beam flange strengthened connections, three beam flange weakened connections, and one through-diaphragm connection. The test results show that the connections with flange cover plates or with partly cut beam flanges satisfy the beam plastic rotation demand for ductile MRFs. From the measured stress profiles along the beam flange and beam web depth, the mechanics of brittle fracture at the end of the beam is discussed. Design recommendations for steel beam-to-column moment connections are proposed.  相似文献   

18.
The study presented in this paper addresses the issue of engineering validation of Graves and Pitarka's (2010) hybrid broadband ground motion simulation methodology with respect to some well‐recorded historical events and considering the response of multiple degrees of freedom (MDoF) systems. Herein, validation encompasses detailed assessment of how similar is, for a given event, the seismic response due to comparable hybrid broadband simulated records and real records. In the first part of this study, in order to investigate the dynamic response of a wide range of buildings, MDoF structures are modeled as elastic continuum systems consisting of a combination of a flexural cantilever beam coupled with a shear cantilever beam. A number of such continuum systems are selected including the following: (1) 16 oscillation periods between 0.1 and 6 s; (2) three shear to flexural deformation ratios to represent respectively shear‐wall structures, dual systems, and moment‐resisting frames; and (3) two stiffness distributions along the height of the systems, that is, uniform and linear. Demand spectra in terms of generalized maximum interstory drift ratio (IDR) and peak floor acceleration (PFA) are derived using simulations and actual recordings for four historical earthquakes, namely, the 1979 Mw 6.5 Imperial Valley earthquake, 1989 Mw 6.8 Loma Prieta earthquake, 1992 Mw 7.2 Landers earthquake, and 1994 Mw 6.7 Northridge earthquake. In the second part, for two nonlinear case study structures, the IDR and PFA distributions over the height and their statistics, are obtained and compared for both recorded and simulated time histories. These structures are steel moment frames designed for high seismic hazard, 20‐story high‐rise and 6‐story low‐rise buildings. The results from this study highlight the similarities and differences between simulated and real records in terms of median and intra‐event standard deviation of logs of seismic demands for MDoF building systems. This general agreement, in a broad range of moderate and long periods, may provide confidence in the use of the simulation methodology for engineering applications, whereas the discrepancies, statistically significant only at short periods, may help in addressing improvements in generation of synthetic records. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

19.
The fault parameters of the Guam earthquake of August 8, 1993 are estimated from seismological analyses, and the possibility of identifying the actual fault plane from tsunami waveforms is tested. The Centroid Moment Tensor solution of long-period surface waves shows one nodal plane shallowly dipping to the north and the other nodal plane steeply dipping to the south. The seismic moment is 3.5×1020 Nm and the corresponding moment magnitude is 7.7. The Moment Tensor Rate Function inversion ofP waves also yields a similar focal mechanism and seismic moment. The point source depth is estimated as 40–50 km.This earthquake generated tsunamis that propagated toward the Japanese coast along the Izu-Bonin-Mariana ridge system. The tsunamis are recorded on ocean bottom pressure gauges and tide gauges. Numerical computation of tsunamis shows that the computed waveforms from the two possible fault planes match well with the observed tsunami waveforms. The numerical computation also shows that the tsunami waveforms at Guam Island, just above the fault, should contain useful information regarding the identification of the actual fault plane. However, the current sampling rate of the tide gauges is so small that the records cannot help the identification.  相似文献   

20.
Empirical Global Relations Converting M S and m b to Moment Magnitude   总被引：1，自引：0，他引：1  
The existence of several magnitude scales used by seismological centers all over the world and the compilation of earthquake catalogs by many authors have rendered globally valid relations connecting magnitude scales a necessity. This would allow the creation of a homogeneous global earthquake catalog, a useful tool for earthquake research. Of special interest is the definition of global relations converting different magnitude scales to the most reliable and useful scale of magnitude, the moment magnitude, M W. In order to accomplish this, a very large sample of data from international seismological sources (ISC, NEIC, HRVD, etc.) has been collected and processed. The magnitude scales tested against M W are the surface wave magnitude, M S, the body wave magnitude, m b, and the local magnitude, M L. The moment magnitudes adopted have been taken from the CMT solutions of HRVD and USGS. The data set used in this study contains 20,407 earthquakes, which occurred all over the world during the time period 1.1.1976–31.5.2003, for which moment magnitudes are available. It is shown that well-defined relations hold between M W and m b and M S and that these relations can be reliably used for compiling homogeneous, with respect to magnitude, earthquake catalogs.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号