首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
In this paper, a distributed object‐based software environment (DOSE) has been developed to facilitate the integrated simulation of an urban system under the risk of urban‐scale hazards such as earthquakes. It is understood that individual simulation participants perform their simulation services in separate environments, bartering service exchange relationships to get what they need to resolve their part of the problem. This is the communication gap between the scientists on one side and the end users who need to understand knowledge and employ it on the other side. The authors envision a distributed simulation service software environment running in parallel with the activities of simulation participants. DOSE has lent itself to integrate interdisciplinary participants through an infrastructure that has three basic building blocks, namely: modularity, scalability, and interoperability. The modular, object‐based, design of DOSE architecture is described in terms of key functionalities of four distinct layers, namely: resource, core, domain, and interface layers. DOSE scalability in terms of urban system size and participant third‐party application complexity is enabled through the interface layer. A message passing model is developed using the Message Passing Interface standard and a control room is provided to schedule the interaction/communication among model processes. DOSE interoperability with the vulnerability analysis third‐party applications is enabled through the Industry Foundation Classes (IFC) standard. An adopted analogy between DOSE and construction industry is employed to provide interpretation and implementation for DOSE interoperability. While interfacing IFC object model to solve DOSE interoperability questions, an extension model for the structural view of IFC is proposed and accepted by the International Alliance for Interoperability. The DOSE application for real‐world urban systems is beyond the scope of this paper and is presented in an accompanying paper work. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

2.
The current paper presents an efficient methodology for numerically simulating in three dimensions adjacent buildings that may experience pounding during strong earthquakes. In particular, a new approach to the numerical problem of spatial impact modeling that does not require the ‘a priori’ determination of the contact points is presented, taking also into account the geometry at the vicinity of an impact. In the current study, the buildings are simulated as linear multi‐degree‐of‐freedom‐systems, but the methodology can be easily extended to consider nonlinear behavior as well. A software application has been specifically developed to implement the proposed methodology, using modern object‐oriented design and programming. The developed software is utilized in a simple example, and the computed results are compared with the corresponding analysis results obtained from a commercial general‐purpose software application that uses typical contact elements for the simulation of impacts. A discussion follows on the advantages and capabilities of the proposed methodology and the developed software. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

3.
Substructure hybrid simulation has been the subject of numerous investigations in recent years. The simulation method allows for the assessment of the seismic performance of structures by representing critical components with physical specimens and the rest of the structure with numerical models. In this study the system level performance of a six‐storey structure with telescoping self‐centering energy dissipative (T‐SCED) braces is validated through pseudo‐dynamic (PsD) hybrid simulation. Fragility curves are derived for the T‐SCED system. This paper presents the configuration of the hybrid simulation, the newly developed control software for PsD hybrid simulation, which can integrate generic hydraulic actuators into PsD hybrid simulation, and the seismic performance of a structure equipped with T‐SCED braces. The experimental results show that the six‐storey structure with T‐SCED braces satisfies performance limits specified in ASCE 41. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

4.
The evaluation of functionality and its evolution in the aftermath of extreme events and during the restoration phase is a critical step in disaster resilience assessment. To this respect, this paper presents the ‘Functionality‐Fragility Surface’ (FFS), which is a tool for probabilistic functionality and resilience evaluation of damaged structures, infrastructure systems, and communities. FFS integrates two well‐known tools, namely Fragility Curves and Restoration Functions, to present the probability of loss of functionality of a system as a function of the extreme‐event intensity, as well as the elapsed time from the initiation of the restoration process. Because of their versatility, FFSs can be applied to components and systems belonging to different infrastructure sectors (e.g., transportation, power distribution, and telecommunication), so they provide a common rigorous paradigm for integrated resilience analyses of multiple sectors, as well as for studies on interdependencies within and across sectors. While it is shown that FFSs can be developed using available data and simple computations for different types of structures and infrastructure systems, this paper proposes also a sophisticated simulation‐based methodology to develop FFSs for individual bridges, taking into account the uncertainties involved in the response, damage, and restoration scheduling of bridges. A Multi‐Span Simply Supported Steel Girder bridge is used to showcase the application of the proposed methodology. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

5.
Fine grained (80 µm) magnetite was introduced onto a semi‐arid grassland hillslope in 1992, as part of a set of rainfall‐simulation experiments. Using measurements of magnetic susceptibility, the median distance travelled by these magnetite grains during subsequent natural runoff events in the 16‐year period up to 2008 was estimated. Coupling this estimate to direct measurements of sediment flux obtained during the rainfall‐simulation experiments has enabled estimation of the erosion rate over this period. The estimated average erosion rate of between 2·61 × 10?2 and 4·36 × 10?2 kg m?1 year?1, is equivalent to a rate of ground lowering between 0·020 and 0·033 mm year?1. This estimate is consistent with (in the sense of being less than) an estimate of total sediment detachment over the same period. The rate of erosion measured using this travel‐distance approach is an order of magnitude less that obtained from a study based on 137Cs in a nearby catchment, and compatible with the longevity of continents. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

6.
Hybrid simulation is a testing methodology that combines laboratory and analytical simulation to evaluate seismic response of complex structural framing systems. One or more portions of the structure, which may be difficult to model numerically or have properties that have not been examined before, are tested in one or more laboratories, whereas the remainder of the structure is modeled in software using one or more computers. These separate portions are assembled such that combined dynamic response of the hybrid model to excitation is computed using a time‐stepping procedure. A hybrid simulation conducted to examine the seismic response of a type of steel concentrically braced frame, the suspended‐zipper‐braced frame, is presented. The hybrid simulation testing architecture, hybrid model, test setup, solution algorithm, and the seismic response of the suspended‐zipper‐braced frame hybrid model are discussed. Accuracy of this hybrid simulation is examined by comparing hybrid and computer‐only simulations and the errors are quantified using an energy‐based approach. This comparison indicates that the deployed hybrid simulation method can be used to accurately model the seismic response of a complex structural system such as the zipper‐braced frame. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

7.
Hydraulic actuators are typically used in a real‐time hybrid simulation to impose displacements to a test structure (also known as the experimental substructure). It is imperative that good actuator control is achieved in the real‐time hybrid simulation to minimize actuator delay that leads to incorrect simulation results. The inherent nonlinearity of an actuator as well as any nonlinear response of the experimental substructure can result in an amplitude‐dependent behavior of the servo‐hydraulic system, making it challenging to accurately control the actuator. To achieve improved control of a servo‐hydraulic system with nonlinearities, an adaptive actuator compensation scheme called the adaptive time series (ATS) compensator is developed. The ATS compensator continuously updates the coefficients of the system transfer function during a real‐time hybrid simulation using online real‐time linear regression analysis. Unlike most existing adaptive methods, the system identification procedure of the ATS compensator does not involve user‐defined adaptive gains. Through the online updating of the coefficients of the system transfer function, the ATS compensator can effectively account for the nonlinearity of the combined system, resulting in improved accuracy in actuator control. A comparison of the performance of the ATS compensator with existing linearized compensation methods shows superior results for the ATS compensator for cases involving actuator motions with predefined actuator displacement histories as well as real‐time hybrid simulations. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

8.
Sound knowledge of the spatial and temporal patterns of rockfalls is fundamental for the management of this very common hazard in mountain environments. Process‐based, three‐dimensional simulation models are nowadays capable of reproducing the spatial distribution of rockfall occurrences with reasonable accuracy through the simulation of numerous individual trajectories on highly‐resolved digital terrain models. At the same time, however, simulation models typically fail to quantify the ‘real’ frequency of rockfalls (in terms of return intervals). The analysis of impact scars on trees, in contrast, yields real rockfall frequencies, but trees may not be present at the location of interest and rare trajectories may not necessarily be captured due to the limited age of forest stands. In this article, we demonstrate that the coupling of modeling with tree‐ring techniques may overcome the limitations inherent to both approaches. Based on the analysis of 64 cells (40 m × 40 m) of a rockfall slope located above a 1631‐m long road section in the Swiss Alps, we illustrate results from 488 rockfalls detected in 1260 trees. We illustrate that tree impact data cannot only be used (i) to reconstruct the real frequency of rockfalls for individual cells, but that they also serve (ii) the calibration of the rockfall model Rockyfor3D, as well as (iii) the transformation of simulated trajectories into real frequencies. Calibrated simulation results are in good agreement with real rockfall frequencies and exhibit significant differences in rockfall activity between the cells (zones) along the road section. Real frequencies, expressed as rock passages per meter road section, also enable quantification and direct comparison of the hazard potential between the zones. The contribution provides an approach for hazard zoning procedures that complements traditional methods with a quantification of rockfall frequencies in terms of return intervals through a systematic inclusion of impact records in trees. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

9.
Run‐off from impervious surfaces has pervasive and serious consequences for urban streams, but the detrimental effects of urban stormwater can be lessened by disconnecting impervious surfaces and redirecting run‐off to decentralized green infrastructure. This study used a before–after‐control‐impact design, in which streets served as subcatchments, to quantify hydrologic effectiveness of street‐scale investments in green infrastructure, such as street‐connected bioretention cells, rain gardens and rain barrels. On the two residential treatment streets, voluntary participation resulted in 32.2% and 13.5% of parcels having green infrastructure installed over a 2‐year period. Storm sewer discharge was measured before and after green infrastructure implementation, and peak discharge, total run‐off volume and hydrograph lags were analysed. On the street with smaller lots and lower participation, green infrastructure installation succeeded in reducing peak discharge by up to 33% and total storm run‐off by up to 40%. On the street with larger lots and higher participation, there was no significant reduction in peak or total stormflows, but on this street, contemporaneous street repairs may have offset improvements. On the street with smaller lots, lag times increased following the first phase of green infrastructure construction, in which streetside bioretention cells were built with underdrains. In the second phase, lag times did not change further, because bioretention cells were built without underdrains and water was removed from the system, rather than just delayed. We conclude that voluntary green infrastructure retrofits that include treatment of street run‐off can be effective for substantially reducing stormwater but that small differences in design and construction can be important for determining the level of the benefit. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

10.
The influence of urbanization on the temperature of small streams is widely recognized, but these effects are confounded by the great natural variety of their contributing watersheds. To evaluate the relative importance of local‐scale and watershed‐scale factors on summer temperatures in urban streams, hundreds of near‐instantaneous temperature measurements throughout the central Puget Lowland, western Washington State, were collected during a single 2‐h period in August in each of the years 1998–2001. Stream temperatures ranged from 8.9 to 27.5 °C, averaging 15.4 °C. Pairwise correlation coefficients between stream temperature and four watershed variables (total watershed area and the watershed percentages of urban development, upstream lakes, and permeable glacial outwash soils as an indicator of groundwater exchange) were uniformly very low. Akaike's information criterion was applied to determine the best‐supported sets of watershed‐scale predictor variables for explaining the variability of stream temperatures. For the full four‐year dataset, the only well‐supported model was the global model (using all watershed variables); for the most voluminous single‐year (1999) data, Akaike's information criterion showed greatest support for per cent outwash (Akaike weight of 0.44), followed closely by per cent urban development + per cent outwash, per cent lake area only, and the global model. Upstream lakes resulted in downstream warming of up to 3 °C; variability in riparian shading imposed a similar temperature range. Watershed urbanization itself is not the most important determining factor for summer temperatures in this region; even the long‐recognized effects of riparian shading can be no more influential than those imposed by other local‐scale and watershed‐scale factors. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

11.
The essence of real time hybrid simulation (RTHS) is the reliance on a physical test (virtual finite element) in support of a numerical simulation, which is unable to properly simulate it numerically. Hence, the computational support for a hybrid simulation is of paramount importance, and one with anything less than a state of the art computational support may defeat the purpose of such an endeavor. A critical, yet often ignored, component of RTHS is precisely the computational engine, which unfortunately has been a bottleneck for realistic studies. Most researches have focused on either the control or on the communication (mostly in distributed, non‐real time hybrid simulation) leaving the third leg of RTHS (computation) ignored and limited to the simulation of simple models (small number of degrees of freedom and limited nonlinearities). This paper details the development of a specialized software written explicitly to perform, single site, hybrid simulation ranging from pseudo‐dynamic to hard real time ones. Solution strategy, implementation details, and actual applications are reported. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

12.
The design of floor isolation systems (FISs) for the protection of acceleration sensitive contents is examined considering multiple objectives, all quantified in terms of the probabilistic system performance. The competing objectives considered correspond to (i) maximization of the level of protection offered to the sensitive content (acceleration reduction) and (ii) minimization of the demand for the isolator displacement capacity and, more importantly, for the appropriate clearance to avoid collisions with surrounding objects (floor displacement reduction). Both of these objectives are probabilistically characterized utilizing a versatile, simulation‐based framework for quantifying seismic risk, addressing all important uncertainties related to the seismic hazard and the structural model. FIS performance is assessed through time‐history analysis, allowing for all important sources of nonlinearity to be directly addressed in the design framework. The seismic hazard is described through a stochastic ground motion model. For efficiently performing the multi‐objective optimization, an augmented surrogate modeling methodology is established, considering development of a single metamodel with respect to both the uncertain model parameters and the design variables for the FIS system. This surrogate model is then utilized to simultaneously support the probabilistic risk assessment and the design optimization to provide the Pareto front of dominant designs. Each of these designs establishes a different compromise between the considered risk‐related objectives offering a variety of potential options to the designer. Within the illustrative example, the efficiency of the established framework is exploited to compare three different FIS implementations, whereas the impact of structural uncertainties on the optimal design is also evaluated. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

13.
Distributed hydrologic models capable of simulating fully‐coupled surface water and groundwater flow are increasingly used to examine problems in the hydrologic sciences. Several techniques are currently available to couple the surface and subsurface; the two most frequently employed approaches are first‐order exchange coefficients (a.k.a., the surface conductance method) and enforced continuity of pressure and flux at the surface‐subsurface boundary condition. The effort reported here examines the parameter sensitivity of simulated hydrologic response for the first‐order exchange coefficients at a well‐characterized field site using the fully coupled Integrated Hydrology Model (InHM). This investigation demonstrates that the first‐order exchange coefficients can be selected such that the simulated hydrologic response is insensitive to the parameter choice, while simulation time is considerably reduced. Alternatively, the ability to choose a first‐order exchange coefficient that intentionally decouples the surface and subsurface facilitates concept‐development simulations to examine real‐world situations where the surface‐subsurface exchange is impaired. While the parameters comprising the first‐order exchange coefficient cannot be directly estimated or measured, the insensitivity of the simulated flow system to these parameters (when chosen appropriately) combined with the ability to mimic actual physical processes suggests that the first‐order exchange coefficient approach can be consistent with a physics‐based framework. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

14.
Detention basins are used to capture postdevelopment runoff and control the peak discharge of the outflow using orifices and weirs. The use of detention basins is typical practice in the construction of new developments on the fringe of existing urban areas, such as the Ulsan–Hwabong district in the city of Ulsan, South Korea. In this study, the required volume and flooding area of a detention basin was determined to control development outflow peaks for 2‐year, 10‐year, and 100‐year design storms with type II rainfall distributions as characterized by the US Department of Agriculture's Soil Conservation Service method. The rainfall–runoff simulation model used was the US Environmental Protection Agency's Storm Water Management Model (EPA‐SWMM) 5, which is the latest version of the software, updated for Windows. We designed three cases of detention basins multi‐staged by 2‐year, 10‐year, and 100‐year design storms and verified the designs with the application of 49 years (1961–2009) of hourly historical rainfall data. The three detention basin designs were compared in terms of the total construction and land costs as well as the benefits associated with recreational facilities or parking lot use. As a result, the design sizes of the detention basins are slightly greater than the actual sizes needed based on the historical rainfall application. Multi‐use detention basins (MDBs) based on 2‐year and 10‐year design storms were found to yield 37.4% and 22.8% benefits, respectively, for recreational facility use compared with detention basins without multi‐use space, and the results also indicate that benefits accrue after 6.5 years for parking lot use. The results of this study suggest that an MDB based on a 2‐year design storm is the most cost‐effective design among the three cases considered for Ulsan, South Korea. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

15.
Real‐time hybrid simulation provides a viable method to experimentally evaluate the performance of structural systems subjected to earthquakes. The structural system is divided into substructures, where part of the system is modeled by experimental substructures, whereas the remaining part is modeled analytically. The displacements in a real‐time hybrid simulation are imposed by servo‐hydraulic actuators to the experimental substructures. Actuator delay compensation has been shown by numerous researchers to vitally achieve reliable real‐time hybrid simulation results. Several studies have been performed on servo‐hydraulic actuator delay compensation involving single experimental substructure with single actuator. Research on real‐time hybrid simulation involving multiple experimental substructures, however, is limited. The effect of actuator delay during a real‐time hybrid simulation with multiple experimental substructures presents challenges. The restoring forces from experimental substructures may be coupled to two or more degrees of freedom (DOF) of the structural system, and the delay in each actuator must be adequately compensated. This paper first presents a stability analysis of actuator delay for real‐time hybrid simulation of a multiple‐DOF linear elastic structure to illustrate the effect of coupled DOFs on the stability of the simulation. An adaptive compensation method then proposed for the stable and accurate control of multiple actuators for a real‐time hybrid simulation. Real‐time hybrid simulation of a two‐story four‐bay steel moment‐resisting frame with large‐scale magneto‐rheological dampers in passive‐on mode subjected to the design basis earthquake is used to experimentally demonstrate the effectiveness of the compensation method in minimizing actuator delay in multiple experimental substructures. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

16.
  相似文献   

17.
Seismic resilience of structures and infrastructure systems is a fast developing concept in the field of disaster management, promoting communities that are resistant and quickly recoverable in case of an extreme event. In this contest, probabilistic seismic demand and fragility analyses are two key elements of the seismic resilience assessment in the majority of the proposed methodologies. Several techniques are available to calculate fragility curves for different types of structures. In particular, to assess the seismic performance of the regional transportation infrastructure, methods for the fragility curve estimation for entire classes of bridges are required. These methods usually rely on a set of assumptions, partially because of the limited information. Other assumptions were introduced at the time when computational resources were inadequate for a purely numerical approach and closed‐form solutions were a convenient alternative. For instance, some of these popular assumptions are aimed at simplifying the model of the engineering demand. In this paper, a simulation‐based methodology is proposed, to take advantage of the computational resources widely available today and avoid such assumptions on the demand. The resulting increase in accuracy is estimated on a typical class of bridges (multi‐span simply supported). Most importantly, the quantitative impact of the assumptions is assessed in the context of a life‐cycle loss estimation analysis and resilience analysis. The results show that some assumptions preserve an acceptable level of accuracy, but others introduce a considerable error in the fragility curves and, in turn, in the expected resilience and life‐cycle losses of the structure. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

18.
Pacific salmon are biogeomorphic agents shown to induce positive feedbacks on their natal watersheds. However, the literature documenting their ecological effects on in‐stream natal environments is more divisive. The disturbance salmon create during redd construction has the potential to reduce stream productivity. The pulse of salmon organic matter (SOM) and marine derived nutrients (MDNs) released during carcass decay has been reported as either stimulating in‐stream productivity or having no local effect. To evaluate the ecological costs and benefits of salmon spawning events, MDN delivery and storage processes need to be identified and quantified. A simulation was conducted in three flow‐through flumes (2 m × 2 m × 30 m) over a 33‐day period (consisting of 15 baseline, four MDN exposure, and 14 post‐exposure days) to assess near‐field sediment and organic matter dynamics during active and post‐spawn simulations. The objective of the study was to measure changes in the amounts and particle sizes of suspended and gravel‐stored fine sediment, in order to elucidate the process and significance of SOM recruitment to the gravel bed via sedimentation. Gravel beds in all flumes were enriched with SOM following treatments but the response was highest in the active spawn simulation. The more effective delivery in the active spawn simulation was attributed to its higher inorganic sediment concentration, which is known to enhance floc formation. Although the active spawn simulation delivered more SOM to the gravel bed, the post‐spawn phase may be equally important to natural streams because its decay phase is longer than the active spawn and consequently can provide SOM to the streambed as long as carcasses remain in‐stream. The delivery, and potential retention, of SOM to spawning streambeds and the intergravel environment may be particularly important for interior streams, which experience low flow conditions during the spawning phase and accordingly have the potential for hyporheic nutrient recruitment and storage. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

19.
A full‐scale shake table test on a six‐story reinforced concrete wall frame structure was carried out at E‐Defense, the world's largest three‐dimensional earthquake simulation facility, in January 2006. Story collapse induced from shear failure of shear critical members (e.g., short columns and shear walls) was successfully produced in the test. Insights gained into the seismic behavior of a full‐scale specimen subjected to severe earthquake loads are presented in this paper. To reproduce the collapse process of the specimen and evaluate the ability of analytical tools to predict post‐peak behavior, numerical simulation was also conducted, modeling the seismic behavior of each member with different kinds of models, which differ primarily in their ability to simulate strength decay. Simulated results showed good agreement with the strength‐degrading features observed in post‐peak regions where shear failure of members and concentrated deformation occurred in the first story. The simulated results tended to underestimate observed values such as maximum base shear and maximum displacement. The effects of member model characteristics, torsional response, and earthquake load dimensions (i.e., three‐dimensional effects) on the collapse process of the specimen were also investigated through comprehensive dynamic analyses, which highlighted the following seismic characteristics of the full‐scale specimen: (i) a model that is incapable of simulating a specimen's strength deterioration is inadequate to simulate the post‐peak behavior of the specimen; (ii) the torsional response generated from uniaxial eccentricity in the longitudinal direction was more significant in the elastic range than in the inelastic range; and (iii) three‐dimensional earthquake loads (X–Y–Z axes) generated larger maximum displacement than any other loading cases such as two‐dimensional (X–Y or Y–Z axes) or one‐dimensional (Y axis only) excitation. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

20.
Substructure hybrid simulation has been actively investigated and applied to evaluate the seismic performance of structural systems in recent years. The method allows simulation of structures by representing critical components with physically tested specimens and the rest of the structure with numerical models. However, the number of physical specimens is limited by available experimental equipment. Hence, the benefit of the hybrid simulation diminishes when only a few components in a large system can be realistically represented. The objective of the paper is to overcome the limitation through a novel model updating method. The model updating is carried out by applying calibrated weighting factors at each time step to the alternative numerical models, which encompasses the possible variation in the experimental specimen properties. The concept is proposed and implemented in the hybrid simulation framework, UI‐SimCor. Numerical verification is carried out using two‐DOF systems. The method is also applied to an experimental testing, which proves the concept of the proposed model updating method. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号