共查询到20条相似文献，搜索用时 140 毫秒
1.
Julian Carrillo 《地震工程与结构动力学》2015,44(6):831-848
Widely used damage indices, such as ductility and drift ratios, do not account for the influences of the duration of strong shaking, the cumulative inelastic deformation or energy dissipation in structures. In addition, the formulation and application of most damage indices have until now been based primarily on flexural modes of failure. However, evidence from earthquakes suggests that shear failure or combined shear‐flexure behavior is responsible for a large proportion of failures. Empirical considerations have been made in this paper for evaluating structural damage of low‐rise RC walls under earthquake ground motions by means of a new energy‐based low‐cycle fatigue damage index. The proposed empirical damage index is based on the results of an experimental program that comprised six shake table tests of RC solid walls and walls with openings; results of six companion walls tested under QS‐cyclic loading were used for comparison purposes. Variables studied were the wall geometry, type of concrete, web shear steel ratio, type of web shear reinforcement, and testing method. The index correlates the stiffness degradation and the destructiveness of the earthquake in terms of the duration and intensity of the ground motions. The stiffness degradation model considers simultaneously the increment of damage associated to the low‐cycle fatigue, energy dissipation, and the cumulative cyclic parameters, such as displacement demand and hysteretic energy dissipated. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
2.
Nonlinear earthquake response analysis and energy calculation for seismic slit shear wall structures
Based on the concept of structural passive control, a new type of slit shear wall, with improved seismic performance when
compared to an ordinary solid shear wall, was proposed by the authors in 1996. The idea has been verified by a series of pseudo-static
and dynamic tests. In this paper a macro numerical model is developed for the wall element and the energy dissipation device.
Then, nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table. Furthermore,
the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β
assumptions for this shear wall model, and the advantages of this shear wall are further demonstrated by the calculation results
from the viewpoint of energy. Finally, according to the seismic damage criterion on the basis of plastic accumulative energy
and maximum response, the optimal analysis is carried out to select design parameters for the energy dissipation device. 相似文献
3.
The concentrically braced frame (CBF) structure is one of the most efficient steel structural systems to resist earthquakes. This system can dissipate energy during earthquakes through braces, which are expected to yield in tension and buckle in compression, while all other elements such as columns, beams and connections are expected to behave elastically. In this paper, the performance of single‐storey CBFs is assessed with nonlinear time‐history analysis, where a robust numerical model that simulates the behaviour of shake table tests is developed. The numerical model of the brace element used in the analysis was calibrated using data measured in physical tests on brace members subjected to cyclic loading. The model is then validated by comparing predictions from nonlinear time‐history analysis to measured performance of brace members in full scale shake table tests. Furthermore, the sensitivity of the performance of the CBF to different earthquake ground motions is investigated by subjecting the CBF to eight ground motions that have been scaled to have similar displacement response spectra. The comparative assessments presented in this work indicate that these developed numerical models can accurately capture the salient features related to the seismic behaviour of CBFs. A good agreement is found between the performance of the numerical and physical models in terms of maximum displacement, base shear force, energy dissipated and the equivalent viscous damping. The energy dissipated and, more particular, the equivalent viscous damping, are important parameters required when developing an accurate displacement‐based design methodology for CBFs subjected to earthquake loading. In this study, a relatively good prediction of the equivalent viscous damping is obtained from the numerical model when compared with data measured during the shake table tests. However, it was found that already established equations to determine the equivalent viscous damping of CBFs may give closer values to those obtained from the physical tests. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
4.
A. Filiatrault 《地震工程与结构动力学》1990,19(2):259-273
A new concept for the earthquake resistant design of timber shear wall structures is proposed. By providing friction devices in the corners of the framing system of the shear wall, its earthquake resistance and damage control potential can be enhanced considerably. During severe earthquake excitations, the friction devices slip and a large portion of the seismic energy input is dissipated by friction rather than by inelastic deformation of the sheathing-to-framing connectors. A simple numerical model is developed and results of inelastic time-history dynamic analyses show the superior performance of the friction damped timber shear walls compared to conventional shear wall systems. The proposed friction devices act both as safety valves by limiting the inertia forces transmitted to the structure, and as structural dampers by dissipating a significant portion of the seismic energy input. The devices can be used in any configuration of the framing system to accommodate architectural or construction requirements. The damping system may also be conveniently incorporated in existing timber shear wall buildings to upgrade significantly their earthquake resistance. 相似文献
5.
Hae Young Noh Dimitrios G. Lignos K. Krishnan Nair Anne S. Kiremidjian 《地震工程与结构动力学》2012,41(4):681-696
Fragility functions are commonly used in performance‐based earthquake engineering for predicting the damage state of a structure subjected to an earthquake. This process often involves estimating the structural damage as a function of structural response, such as the story drift ratio and the peak floor absolute acceleration. In this paper, a new framework is proposed to develop fragility functions to be used as a damage classification/prediction method for steel structures based on a wavelet‐based damage sensitive feature (DSF). DSFs are often used in structural health monitoring as an indicator of the damage state of the structure, and they are easily estimated from recorded structural responses. The proposed framework for damage classification of steel structures subjected to earthquakes is demonstrated and validated with a set of numerically simulated data for a four‐story steel moment‐resisting frame designed based on current seismic provisions. It is shown that the damage state of the frame is predicted with less variance using the fragility functions derived from the wavelet‐based DSF than it is with fragility functions derived from an alternate acceleration‐based measure, the spectral acceleration at the first mode period of the structure. Therefore, the fragility functions derived from the wavelet‐based DSF can be used as a probabilistic damage classification model in the field of structural health monitoring and an alternative damage prediction model in the field of performance‐based earthquake engineering. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
6.
A new type of energy‐dissipated structural system for existing buildings with story‐increased frames is presented and investigated in this paper. In this system the sliding‐friction layer between the lowest increased floor of the outer frame structure and the roof of the original building is applied, and energy‐dissipated dampers are used for the connections between the columns of the outer frame and each floor of the original building. A shaking table test is performed on the model of the system and the simplified structural model of this system is given. The theory of the non‐classical damping approach is introduced to the calculation analyses and compared with test results. The results show that friction and energy‐dissipated devices are very effective in reducing the seismic response and dissipating the input energy of the model structure. Finally, the design scheme and dynamic time‐history analyses of an existing engineering project are investigated to illustrate the application and advantages of the given method. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
7.
对3种不同厚度的钢材标准试件进行酸性大气环境气雾加速腐蚀试验,并对锈蚀后的试件进行单向拉伸试验,得到钢材力学性能随失重率的衰变规律。同时考虑构件截面削弱与材料力学性能降低,建立不同锈蚀程度下的钢框架有限元分析模型,利用非线性静力推覆分析得到锈蚀钢框架结构的整体初始刚度随锈蚀程度增大的退化规律,以表征结构因锈蚀造成的损伤。提出同时反映最大变形效应和累积耗能效应的双参数结构整体地震损伤模型,并在此损伤模型的基础上集合钢材材性试验结果及有限元分析结果,提出适用于锈蚀钢结构的"时变"损伤模型。对比分析以层间位移角及时变损伤模型为性能指标建立的不同龄期钢框架结构的地震易损性曲线,结果表明:随着锈蚀程度的增加,在相同地震动强度下结构超越某一极限状态的失效概率均增大。 相似文献
8.
This paper presents an energy‐consistent approach for reducing the number of degrees‐of‐freedom (DOFs) in tall steel frames. In the present approach, the moment resistance of beams and columns in each story is represented by the moment resistance of a rotational spring and a beam‐column element, respectively. The shear resistance provided by braces in each story is represented by the shear resistance of a shear spring. Furthermore, the resistance to the overturning moment provided by axial resistance of columns in each story is represented by the moment resistance of a rotational spring. These representations are carried out by achieving the equivalence between the strain energy stored and dissipated in the elements in the full (unreduced) DOF models and the strain energy stored and dissipated in the corresponding elements in the reduced DOF models. The accuracy of the present approach is demonstrated through numerical examples, which compare the results of nonlinear time history analyses obtained using the full and reduced DOF models. In the numerical examples, the response is estimated for 20‐story and 40‐story steel frames with and without buckling‐restraint braces subjected to a suite of near‐fault and far‐fault ground motions. The present approach is useful in estimating the response of tall steel frames having non‐regular member arrangements to a suite of intense ground motions including near‐fault ones, where it is crucial to capture the influence of higher mode effects on collapse mechanisms. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
9.
Based on cyclic load tests of large-scale reinforced concrete elements and assemblages, a probabilistic model of member failure is developed. The model gives the probability of survival at time t as a functional of damage ratio and dissipated energy up to t. After extension to multivariate survival of several members with correlated resistance, the model is used to calculate the safety of reinforced concrete frames subjected to given input motions. Results are in terms of the probability of local failure and of no failure anywhere in the system. 相似文献
10.
Reinforced concrete (RC) shear walls have been extensively used as lateral load resisting structural members in tall buildings. However, in the past, strong earthquake events RC structural walls in some buildings suffered severe damage, which concentrated at the bottom and was very difficult to be repaired. The installation of the replaceable corner components (RCCs) at the bottom of the structural wall is a new method to form an earthquake resilient structural wall whose function can be quickly restored by replacing the RCCs after the strong earthquake because of the damage concentrating on RCCs. In this study, a new kind of replaceable energy‐dissipation component installed at the bottom corner of RC structural walls was proposed. To study the seismic performance of the new structural wall with RCCs, the cyclic loading tests on three new structural wall specimens and one conventional RC structural wall specimen were conducted. One of the new structural wall specimens experienced replacement and reloading process to verify the feasibility of replacement. The results show that the structural behavior of all specimens was flexure dominating. The damage in the new shear specimens mainly concentrated on RCCs. The replacement of RCCs can be implemented conveniently after the residual deformation occurred in the structure. Compared with the conventional structural wall specimen, the seismic performance of new structural wall specimens was improved significantly. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
11.
Energy dissipation characteristics of structural members which exhibit both strength and stiffness deterioration under imposed displacement reversals are investigated. In the experimental part, 17 reinforced concrete beam specimens were tested under constant and variable amplitude inelastic displacement cycles. The constant‐amplitude tests were employed to determine the low‐cycle fatigue behaviour of specimens where the imposed displacement amplitude was the major variable. A two‐parameter fatigue model was developed in order to express the variation of dissipated energy with the number of displacement cycles. This model was then used to predict the energy dissipation of test specimens subjected to variable‐amplitude displacement cycles simulating severe seismic excitations. It has been demonstrated that the remaining energy dissipation capacity in a forthcoming displacement cycle is dependent on the energy dissipated along the completed displacement path. Moreover, it is observed that total energy dissipation is dependent on the length of the displacement path. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
12.
Although structural mechanical impedance is a direct representation of the structural parameters, its measurement is difficult at high frequencies owing to practical considerations. This paper presents a new method of damage diagnosis by means of changes in the structural mechanical impedance at high frequencies. The mechanical impedance is extracted from the electro‐mechanical admittance signatures of piezoelectric‐ceramic (PZT) patches surface bonded to the structure using the electro‐mechanical impedance (EMI) technique. The main feature of the newly developed approach is that both the real as well as the imaginary component of the admittance signature is used in damage quantification. A complex damage metric is proposed to quantify damage parametrically based on the extracted structural parameters, i.e. the equivalent single degree of freedom (SDOF) stiffness, the mass, and the damping associated with the drive point of the PZT patch. The proposed scheme eliminates the need for any a priori information about the phenomenological nature of the structure or any ‘model’ of the structural system. As proof of concept, the paper reports a damage diagnosis study conducted on a model reinforced concrete (RC) frame subjected to base vibrations on a shaking table. The proposed methodology was found to perform better than the existing damage quantification approaches, i.e. the low‐frequency vibration methods as well as the traditional raw‐signature based damage quantification in the EMI technique. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
13.
The self‐centering rocking steel frame is a seismic force resisting system in which a gap is allowed to form between a concentrically braced steel frame and the foundation. Downward vertical force applied to the rocking frame by post‐tensioning acts to close the uplifting gap and thus produces a restoring force. A key feature of the system is replaceable energy‐dissipating devices that act as structural fuses by producing high initial system stiffness and then yielding to dissipate energy from the input loading and protect the remaining portions of the structure from damage. In this research, a series of large‐scale hybrid simulation tests were performed to investigate the seismic performance of the self‐centering rocking steel frame and in particular, the ability of the controlled rocking system to self‐center the entire building. The hybrid simulation experiments were conducted in conjunction with computational modules, one that simulated the destabilizing P‐Δ effect and another module that simulated the hysteretic behavior of the rest of the building including simple composite steel/concrete shear beam‐to‐column connections and partition walls. These tests complement a series of quasi‐static cyclic and dynamic shake table tests that have been conducted on this system in prior work. The hybrid simulation tests validated the expected seismic performance as the system was subjected to ground motions in excess of the maximum considered earthquake, produced virtually no residual drift after every ground motion, did not produce inelasticity in the steel frame or post‐tensioning, and concentrated the inelasticity in fuse elements that were easily replaced. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
14.
目前的既有钢混结构地震损伤研究没有同时考虑不同抗震设计规范差异和耐久性两个因素对结构抗震性能的影响,且损伤指标较简单,在动力损伤分析中也存在局限。基于云模型的特点,提出了包括弹塑性耗能差率、刚度损伤指数、层间位移角和顶点位移角的多元结构损伤状态综合评估方法,能够同时考虑结构各损伤指数的随机性和模糊性。考虑不同版本抗震设计规范造成的结构性能差异和耐久性下降对结构性能的影响,设计3个典型五层钢混框架结构,进行增量动力分析,验证损伤评估方法的准确性。结果表明：随着抗震规范版本的更新,结构的损伤程度有适当减轻;同一结构的损伤程度因混凝土碳化作用先减轻后加重;采用弹塑性耗能差率表征既有结构的地震损伤效果优于刚度损伤指数;基于多指标云模型损伤评估方法获得的云模型综合隶属度和综合损伤值能够更加细化和精确地描述结构损伤状态。 相似文献
15.
Analytical model for the in‐plane seismic performance of cold‐formed steel‐framed gypsum partition walls 
下载免费PDF全文
下载免费PDF全文 This paper proposes an experimentally verified procedure to analytically model cold‐formed steel‐framed gypsum nonstructural partition walls considering all the critical components. In this model, the nonlinear behaviors of the connections are represented by hysteretic load‐deformation springs, which have been calibrated using the component‐level experimental data. The studs and tracks are modeled adopting beam elements with their section properties accounting for nonlinear behavior. The gypsum boards are simulated by linear four‐node shell elements. The proposed procedure is implemented to generate the analytical models of three full‐scale partition wall specimens in the OpenSees platform. The specimens were tested as a part of the NEESR‐GC Project on Simulation of the Seismic Performance of Nonstructural Systems. Force‐displacement responses, cumulative dissipated energy, and damage mechanisms from the analytical simulation are compared to the experimental results. The comparison shows that the analytical model accurately predicts the trend of the response as well as the possible damage mechanisms. The procedure proposed here can be adopted in future studies by researchers and also engineers to assess the seismic performance of partition walls with various dimensions and construction details, especially where test data are not available. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
16.
Systematic development of a new hysteretic damper based on torsional yielding: part II—experimental phase 下载免费PDF全文
下载免费PDF全文 This paper reports on experimental studies carried out on a 200 kN, 120 mm‐capacity prototype of the newly developed multidirectional torsional hysteretic damper for seismic protection of structures. The main goal of the experiments is to test the validity of the theory developed in a companion paper and to evaluate the low‐cycle fatigue performance of the energy dissipaters of the damper. Because the design and configuration of the damper allow easy replacement of the energy dissipaters, four sets of energy dissipaters were produced out of S355J2 + N, C45 (two sets), and 42CrMo4 + QT steel grades. Force–displacement response of the multidirectional torsional hysteretic damper is studied through fully reversed cyclic quasi‐static displacement‐controlled tests that were carried out in compliance with EN 15129. Following the verification tests, with the aim of studying fatigue and fracture behavior of the cylindrical energy dissipaters of the device, certain numbers of them were subjected to further cyclic tests up to failure, and observations on their fatigue/fracture behavior are reported. The experimental verification test results proved the validity of the developed theory and component design assumptions presented in a companion paper. Furthermore, the energy dissipaters exhibited excellent torsional low‐cycle fatigue performance with number of cycles to failure reaching 118 at a maximum shear strain of 8% for S355J2 + N steel grade. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
17.
高强混凝土框架柱的地震损伤模型 总被引：3，自引：1，他引：2
本文首先讨论了现有的几种地震损伤模型及其特点,然后计算出试验框架柱累积滞回耗能随加载循环水平的变化,分析和讨论了轴压比、箍筋形式、配箍率、纵向配筋率、混凝土强度等级以及剪跨比对累积滞回耗能的影响。根据现有的损伤模型,对试验框架柱的损伤指数进行了分析比较,给出了符合高强混凝土框架柱和普通混凝土框架柱的地震损伤模型。根据损伤指数随加载循环水平的变化规律,分析和讨论了剪跨比、轴压比以及配箍率对损伤的影响。最后通过对各地震损伤模型的比较分析,提出了高强混凝土框架柱的地震损伤模型。 相似文献
18.
Given their excellent self‐centering and energy‐dissipating capabilities, superelastic shape memory alloys (SMAs) become an emerging structural material in the field of earthquake engineering. This paper presents experimental and numerical studies on a scaled self‐centering steel frame with novel SMA braces (SMAB), which utilize superelastic Ni–Ti wires. The braces were fabricated and cyclically characterized before their installation in a two‐story one‐bay steel frame. The equivalent viscous damping ratio and ‘post‐yield’ stiffness ratio of the tested braces are around 5% and 0.15, respectively. In particular, the frame was seismically designed with nearly all pin connections, including the pinned column bases. To assess the seismic performance of the SMA braced frame (SMABF), a series of shake table tests were conducted, in which the SMABF was subjected to ground motions with incremental seismic intensity levels. No repair or replacement of structural members was performed during the entire series of tests. Experimental results showed that the SMAB could withstand several strong earthquakes with very limited capacity degradation. Thanks to the self‐centering capacity and pin‐connection design, the steel frame was subjected to limited damage and zero residual deformation even if the peak interstory drift ratio exceeded 2%. Good agreement was found between the experimental results and numerical simulations. The current study validates the prospect of using SMAB as a standalone seismic‐resisting component in critical building structures when high seismic performance or earthquake resilience is desirable under moderate and strong earthquakes. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
19.
Integrating visual damage simulation,virtual inspection,and collapse capacity to evaluate post‐earthquake structural safety of buildings 下载免费PDF全文
下载免费PDF全文 A methodology is introduced to assess the post‐earthquake structural safety of damaged buildings using a quantitative relationship between observable structural component damage and the change in collapse vulnerability. The proposed framework integrates component‐level damage simulation, virtual inspection, and structural collapse performance assessment. Engineering demand parameters from nonlinear response history analyses are used in conjunction with component‐level damage simulation to generate multiple realizations of damage to key structural elements. Triggering damage state ratios, which describe the fraction of components within a damage state that results in an unsafe placard assignment, are explicitly linked to the increased collapse vulnerability of the damaged building. A case study is presented in which the framework is applied to a 4‐story reinforced concrete frame building with masonry infills. The results show that when subjected to maximum considered earthquake level ground motions, the probability of experiencing enough structural damage to trigger an unsafe placard, leading to building closure, is more than 2 orders of magnitude higher than the risk of collapse. 相似文献
20.
Post‐repair effect of column jackets on aftershock fragilities of damaged RC bridges subjected to successive earthquakes 下载免费PDF全文
下载免费PDF全文 In light of recent earthquakes, structures damaged during an initial seismic event (mainshock) may be more vulnerable to severe damage and collapse during a subsequent event (aftershock). In this paper, a framework for the development of aftershock fragilities is presented; these aftershock fragilities define the likelihood that a bridge damaged during an initial event will exhibit a given damage state following one or more subsequent events. The framework is capable of (i) quantifying the cumulative damage of unrepaired bridges subjected to mainshock–aftershock sequences (effect of multiple earthquakes) and (ii) evaluating the effectiveness of column repair schemes such as steel and fiber‐reinforced‐polymer jackets (post‐repair effect of jackets). To achieve this aim, the numerical model of repaired columns is validated using existing experimental results. A non‐seismically designed bridge is chosen as a case study and is modeled for three numerical bridge models: a damaged (but unrepaired) bridge model, and two bridge models with columns repaired with steel and fiber‐reinforced polymer jackets. A series of back‐to‐back dynamic analyses under successive earthquakes are performed for each level of existing damage. Using simulated results, failure probabilities of components for multiple limit states are computed for each bridge model and then are used to evaluate the relative vulnerability of components associated with cumulative damage and column repair. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献