共查询到20条相似文献，搜索用时 187 毫秒
1.
Considering the potential use of cementstabilized loess (CSL) as a construction material for structures that are subjected to frequent loess landslides, this paper explores the stabilization and improvement of geotechnical characteristics of loess achieved by the addition of 0%-9% cement by dry weight. Laboratory evaluations investigated the consistency limits, compaction, compressibility, California bearing ratio (CBR), direct shear strength, and unconfined compression strength (UCS) of CSL for different curing stages. A durability index was quantified to estimate the influence of wetting-drying (w-d) cycles on CSL strength, and an optimum cement dosage was also identified. The results reveal that the cohesion of CSL is substantially more sensitive to structure than its friction angle and that cohesion is responsible for shear strength increase after remoulding. The cement proportions have an effective role in the enhancement of compressibility. The development of UCS can be categorized into the early stage (<14 days) and the later stage (>14 days). The increase in strength primarily occurred in the first 14 days. The w-d cycles have a significant influence on the decrease in compression strength. The CBR value increases with increments of additional proportions and compaction times. The relationships of UCS versus the compressibility modulus and UCS versus CBR are established to facilitate the mix design for strength. A rational predictive exponential equation is proposed to predict the durability index for different w-d cycles. 相似文献
2.
沙漠风积沙稳定性差, 采用水泥作为固化剂进行风积沙固化, 是改善风积沙性质和实现风积沙资源化利用的有效手段。以取自内蒙古库布齐沙漠的风积沙为材料, 制备3%含水量的重塑风积沙, 掺入水泥固化剂并充分拌匀而形成固化风积沙, 开展水泥固化风积沙的抗剪、抗压和抗拔承载性能试验。结果表明, 水泥掺量对固化风积沙黏聚强度的提高程度要大于内摩擦角。含水量3%的风积沙掺入6%的水泥经28 d常温养护的固化风积沙无侧限抗压强度平均值为0.156 MPa。固化风积沙扩展基础抗拔荷载-位移曲线呈现初始弹性段至峰值荷载以及峰值荷载后破坏的两阶段脆性破坏特征。水泥固化提高风积沙抗拔承载性能效果显著, 且与基础底板尺寸、抗拔埋深及基础深宽比等因素有关。 相似文献
3.
The cement dry jet mixing method has been used to reinforce soft cohesive ground to increase the strength of soft cohesive ground and to decrease its deformation. The study briefly introduces the curing mechanism of cement-soil,presents the factors of influencing on compressive strength,mainly analyses the factors including cement mixing ratio,cement strength grade,curing age,moisture content and soil texture and puts forward some rational proposals at last. 相似文献
4.
海绵城市作为城市雨洪管理、人居环境改善的重要手段,在水资源、水环境及水灾害问题突出的湿陷性黄土地区开展具有现实意义.为保证湿陷性黄土地区海绵城市建设的有效性与安全性,通过梳理黄土水分入渗规律、湿陷机理及湿陷性黄土地区海绵城市建设的研究趋势和不足,总结了湿陷性黄土地区海绵城市安全有效推进所面临的问题主要有:海绵城市建设需... 相似文献
5.
Compacted loess is widely used as fills of road embankments in loess regions of northern China. Generally, densely-compacted loess can satisfy the requirements of embankment strength and post-construction deformation. I lowever, uneven subsidence, pavement cracks and other related damages can affect the integrity of loess subgrade after several years of operation, and even cause some hazards, especially in North China, where the strong freeze-thaw erosion occurs. In this study, cyclic freeze-thaw tests for both densely and loosely compacted loess samples were performed to determine the variation in engineering properties such as volume, void ratio, collapsible settlement, microstructure, and the related mechanisms were addressed. The experimental results showed that an obvious water migration and redistribution occurred within the samples during freeze-thaw cycles. Ice lenses and fissures could be identified in the upper frozen layers of the samples. After freeze-thaw cycles, the dry densities of the nipper layers of samples changed significantly due to strong freeze-thaw erosion. The dry densities decreased for the dense sample and increased for the loose sample. It can be found that dense samples become loose, while loose samples became dense with the increasing number of freeze-thaw cycles. Their related void ratios changed reversely. Both void ratios tended to fall into a certain range, which verified the concept of a residual void ratio proposed by Viklander. The loosening process of densely compacted samples involves the formation of large pores, volume increase and density reduction as well as the related changes in mechanical properties because freeze-thaw cycles may be important contribution to problems of loess road embankments. Adverse effects of freeze-thaw cycles, therefore, should be taken into account in selecting loess parameters for the stability evaluation of road embankment in seasonally frozen ground regions. 相似文献
6.
孔隙特征作为反映黄土微观结构的重要特征之一, 直接影响黄土的水敏性、渗透性和强度等物理力学性质。为了研究水力耦合作用下黄土微观孔隙结构特征, 使用CT技术对天然原状、原状饱和与重塑黄土的初始结构以及不固结不排水剪切试验后的土体结构进行了扫描, 通过建立黄土三维结构模型, 分析了剪切试验前后孔隙结构的演变特征。结果表明: 饱和与重塑作用使天然原状黄土的大孔隙减少, 剪切作用使天然原状黄土和重塑黄土发生剪切破坏, 原状饱和黄土发生压缩破坏, 局部孔隙率增加。天然原状黄土与原状饱和黄土在剪切前后均表现为微孔和小孔数量较多, 其孔隙倾角主要分布在50°~90°之间, 解释了黄土亚稳态结构形成的主要原因。扰动作用使重塑黄土的孔隙尺寸分布均匀, 且重塑黄土与原状饱和黄土在水力作用下更易失稳屈服。揭示了黄土剪切变形破坏的微观结构主要表现为粒间胶结物的溶解、孔隙的坍塌与填充以及颗粒旋转、破碎和滑移。试验结果可为黄土剪切强度降低和湿陷机理研究提供依据。 相似文献
7.
8.
《山地科学学报》2021,(8)
Unsaturated loess in natural sites loses stability as the overburden load continuously increases. Traditional soil modifiers such as cement and fly ash affect the surrounding environment. A new type of material, i.e., lignin, is environmentally friendly and able to increase the strength of loess. However, the engineering characteristics of the improved loess under unsaturated conditions are not yet clear. In this study, the soil-water characteristic curves(SWCCs) of lignin-improved loess samples were determined from 0 k Pa to 700 k Pa using a pressure plate instrument, and then, they were fitted using the van Genuchten(VG) model and the Fredlund and Xing(FX) model. In addition, the effects of the lignin content and sample preparation methods on the SWCCs were investigated to determine the optimal lignin content and a suitable sample preparation method for loess foundations. As the lignin content increases, the matric suction and residual water content of the improved loess increase. The suction stress increases with the increasing lignin contents of 1%-2%. At lignin contents of 3%-4%, the suction stress begins to decrease and the samples prepared using the slurry method has a lower suction stress than that prepared using the wet mixing method. The air entry value(AEV) increases with increasing lignin content. In addition, scanning electron microscopy(SEM) was used to investigate the microstructural variations. It was found that after the addition of lignin, the entrapment of the loess particles by the lignin fibers created some larger particles and smaller pore diameters, which in turn led to poor connectivity of the loess pores. These changes cause the matric suction of the modified loess to increase. 相似文献
9.
根据古地磁、磁化率、粒度和重矿物分析及电镜扫描石英砂表面特征等测试手段的综合研究,西宁地区的黄土可分出从S_0至L_(17)的连续黄土——古土壤序列。它包括全新世黄土、马兰黄土、离石黄土和午城黄土,形成的时间为1.2MaB·P.。黄土粒度粗,且含有两个风成细砂分层。重矿物以不透明矿物、角闪石为主,次为绿泥石、锆石和金红石等。石英砂颗粒以次棱角状为主,其次为棱角状。石英砂表面机械结构中有众多的冰川作用痕迹和风力作用痕迹。本区黄土主要来源于青藏高原第四纪局部冰盖、冰川及其外围广大冰缘地区所产生的粉砂物质。西宁大墩岭黄土剖面详细地记录了1.2MaB·P.的环境变化信息。其中1.1MaB·P.形成的L_(15)顶部的细砂分层代表1.2Ma以来最为干冷的严酷时期。L_1和L_2是末次冰期和倒数第二次冰期的产物。倒数第二次冰期比末次冰期更为干冷,极盛时期为0.155MaB·P.。S_1S_3和S_4可能代表1.2Ma以来本区最为温暖湿润的时期。 相似文献
10.
Sulpho-aluminate expansive cementitious composite is proved to be one of the most effective ways to prevent concrete cracking too soon． Mix design of sulpho-aluminate expansive cementitious composite complete- ly depends on experience and experiments at present． This method ignores the influence of expansion behavior which hinders the application of sulpho-aluminate expansive cementitious composite． The workability,free ex- pansion property,flexural strength and compressive strength of sulpho-aluminate expansive cementitious com- posite have been investigated by tests． The relationship between expansion ratio and mix design parameters such as curing age,water-cement ratio and cement abundance coefficient is deduced according to the experimental statistics． A new simplified approach to mix design of sulpho-aluminate expansive cementitious composite is pro- posed as a reference for construction application,which avoids experiments and experience． 相似文献
11.
《山地科学学报》2020,17(7):1696-1711
Based on the precipitation data observed by stations and data simulated by 23 CMIP5 models, the features and future changes of summer(Jun-JulAug) extreme precipitation events in Sichuan Province of China were analysed. We found that the total precipitation(RSum), extreme precipitation threshold(Threshold90), extreme precipitation(TR90), extreme precipitation percentage(TR90 pct) and extreme precipitation intensity(TR90 str) decreased from the southeast to the northwest in Sichuan Province, reflecting the differences between eastern Sichuan(ESC, basins) and western Sichuan(WSC, mountains). Compared with the observations, most of the CMIP5 models showed that there were wet biases in WSC and an unclear bias pattern in ESC for the RSum, Threshold90, TR90, and TR90 str. However, the extreme precipitation days(ND90) and TR90 pct values simulated by the models were generally overestimated and underestimated,respectively. Compared with the historical period, most models showed obvious increases in the TR90 and TR90 pct in the 21 century, while the characteristics of Rsum, ND90, and TR90 str were inconspicuous. Compared with the mid-21 st century, the extreme precipitation in the late-21 st century exhibited a certain degree of increase. Even during the same period, the results of RCP8.5 were higher than those of RCP4.5, especially for the ND90, TR90, and TR90 pct. 相似文献
12.
在冻结法施工中, 冻土的强度及变形特性对冻结壁的稳定性至关重要。为了研究不同含水率对冻结作用下土的强度和蠕变的影响, 以江西红黏土为研究对象, 通过冻结三轴试验, 在-10℃下研究含水率对冻结红黏土强度及蠕变特征的影响。试验结果表明: 16%~32%含水率范围内, 冻结红黏土的抗压强度随含水率的增加先增大后减小; 16%~28%含水率范围内, 随着含水率增大, 其黏聚力逐渐增大, 内摩擦角逐渐减小; 围压为0.2 MPa与0.5 MPa下的蠕变曲线都显示含水率较低时只会出现衰减蠕变阶段和稳定蠕变阶段, 含水率较高时会出现加速蠕变阶段。含水率对红黏土的力学性质影响较大, 研究成果可为江西地区红黏土地层地铁隧道建设人工冻结法施工提供参考。 相似文献
13.
Influences of soil moisture and salt content on loess shear strength in the Xining Basin,northeastern Qinghai-Tibet Plateau 总被引：1，自引：0，他引：1
FU Jiang-tao HU Xia-song LI Xi-lai YU Dong-mei LIU Ya-bin YANG You-Qing QI Zhao-xin LI Shu-xia 《山地科学学报》2019,(5)
Moisture and salt content of soil are the two predominant factors influencing its shear strength. This study aims to investigate the effects of these two factors on shear strength behavior of loess in the Xining Basin of Northeast Qinghai-Tibet Plateau, where such geological hazards as soil erosion, landslides collapse and debris flows are widespread due to the highly erodible loess. Salinized loess soil collected from the test site was desalinized through salt-leaching in the laboratory. The desalinized and oven-dried loess samples were also artificially moisturized and salinized in order to examine how soil salinity affects its shear strength at different moisture levels. Soil samples prepared in different ways(moisturizing, salt-leaching, and salinized) were measured to determine soil cohesion and internal friction angle. The results show that salt-leaching up to 18 rounds almost completely removed the salt content and considerably changed the physical components of loess, but the soil type remained unchanged. As salt content increases from 0.00% to 12.00%, both the cohesion and internal friction angle exhibit an initial decrease and then increase with salt content. As moisture content is 12.00%, the salt content threshold value for both cohesion and internal friction angle is identified as 3.00%. As the moisture content rises to 16.0% and 20.00%, the salt content threshold value for cohesion is still 6.00%, but 3.00% for internal friction angle. At these thresholds soil shear strength is the lowest, below which it is inversely related to soil salinity. Beyond the thresholds, however, the relationship is positive. Dissimilar to salinity, soil moisture content exerts an adverse effect on shear strength of loess. The findings of this study can provide a valuable guidance on stabilizing the engineering properties of salinized loess to prevent slope failures during heavy rainfall events. 相似文献
14.
It is difficult to obtain reliable shear strength parameters for the stability analysis and evaluation of high loess slopes.Hence,this paper determines slope elements and physical parameter of 79 slopes with heights of[40,120]m based on the measured loess slopes in the Ganquan and Tonghuang subregions of northern Shaanxi Province,China.In the limit state of the loess slope(stability factor Fs is 1.0),a fitting equation for the slope height and width is established.Then,the model is developed by stability analysis software-SLOPE/W,and the comprehensive shear strength parameters corresponding to different slope heights of the high slope in the study area are obtained by inversion using the Morgenstern-Price method.The results show that when the height of the slope increases,the cohesion c increases in the soil,and the internal friction angle j decreases.This change is consistent with the characteristics reflected in the composition and physical properties of the slopes,and the comprehensive strength parametric curves are very similar between the Ganquan subregion and the Tonghuang subregion.A landslide that occurred in Miaodian-zaitou of Jingyang County,Shaanxi Province,is selected to verify this inversion method,and the results show that the calculated shear strength parameters of the inversion are consistent with the measured value of the actual slope. 相似文献
15.
Effects of site conditions on earthquake ground motion and their applications in seismic design in loess region 总被引：3，自引：0，他引：3
The Loess Plateau is an earthquake prone region of China, where the effects of loess deposit on ground motion were discovered during the 2008 Wenchuan earthquake (Ms8.0) and the 2013 Minxian-Zhangxian earthquake (Ms6.6). The field investigations, observations, and analyses indicated that large number of casualties and tremendous economic losses were caused not only by collapse and damage of houses with poor seismic performance, landslides, but also amplification effects of site conditions, topography and thickness of loess deposit, on ground motion. In this paper, we chose Dazhai Village and Majiagou Village as the typical loess site affected by the two earthquakes for intensity evaluation, borehole exploration, temporary strong motion array, micro tremor survey, and numerical analysis. The aim is to explore the relations between amplification factors and site conditions in terms of topography and thickness of loess deposit. We also developed site amplification factors of ground motion for engineering design consideration at loess sites. The results showed that the amplification effects are more predominant with increase in thickness of loess deposit and slope height. The amplification may increase seismic intensity by 1 degree, PGA and predominant period by 2 times, respectively. 相似文献
16.
Extraction and analysis of gully head of Loess Plateau in China based on digital elevation model 总被引：3，自引：1，他引：3
In China′s Loess Plateau area, gully head is the most active zone of a drainage system in gully areas. The differentiation of loess gully head follows geospatial patterns and reflects the process of the loess landform development and evolution of its drainage system to some extent. In this study, the geomorphic meaning, basic characteristics, morphological structure and the basic types of loess gully heads were systematically analysed. Then, the loess gully head′s conceptual model was established, and an extraction method based on Digital Elevation Model(DEM) for loess gully head features and elements was proposed. Through analysing the achieved statistics of loess gully head features, loess gully heads have apparently similar and different characteristics depending on the different loess landforms where they are found. The loess head characteristics reflect their growth period and evolution tendency to a certain degree, and they indirectly represent evolutionary mechanisms. In addition, the loess gully developmental stages and the evolutionary processes can be deduced by using loess gully head characteristics. This study is of great significance for development and improvement of the theoretical system for describing loess gully landforms. 相似文献
17.
Low frequency (LF) current (period>25 hour) variation at 5 stations in Jiaozhou Bay. Shijiousuo, and the central part of the Yellow Sea were studied by analyzing the observed long-period current data series in the study area.1) There are obvious periods of 3 and 5 days in the LF current spectra. The energy spectral value of LF current of a 5 day period is remarkably larger than that of a 3 day period. These periods reflect the correlations between the LF current variation and the LF water level variation.2) The feet that the 15-day period in the LF current spectra corresponds to the semi-monthly celestial tide period indicates that the tide-induced residual current is an important and most evident LF current component in the bay.3) The LF current spectral energy density in the northward direction is much larger than that in the eastward direction. This shows the frequency and strength of the wind field in the northward direction are evidently larger than that in the eastward direction. 相似文献
18.
降雨入渗和人工开挖是诱发黄土滑坡的重要因素, 为了研究在这2种诱因作用下关中地区黄土滑坡失稳过程及其对稳定性的影响, 以陕西省长武县杨厂村老庙滑坡为研究对象, 通过现场调查、地质测绘和钻孔勘探, 查明了该滑坡变形特征, 定性分析了滑坡变形演变过程; 基于滑坡变形前15 d内日降雨量实测值, 采用有限元软件, 对坡脚开挖后连续降雨作用下滑坡形成过程进行了仿真模拟; 基于强度折减法对该滑坡稳定性变化规律进行了研究。结果表明: ①关中地区特殊的地层结构是滑坡变形的内因, 降雨是最主要的诱发因素; ②滑坡失稳演化过程表现为: 坡体处于蠕滑状态, 坡脚开挖后, 坡体前缘失稳, 牵引中后缘坡体向下错动而产生张拉裂缝, 在降雨作用下, 雨水沿裂缝渗入坡体深部, 滑坡中部岩土体浸水后抗剪强度降低, 从而导致黄土层与红黏土层接触面饱水形成贯通滑带, 诱发深层滑坡; ③滑坡开挖后较初始状态, 稳定性系数降幅为0.102, 此后受连续降雨影响, 稳定性系数在前10 d以平均0.010/d的速率缓慢下降, 第10~13 d以0.034/d的速率快速下降至最低, 第13 d以后开始回升。研究结果可以为该类滑坡防治提供有效依据。 相似文献
19.
黄土作为一种特殊的颗粒材料,微观上颗粒组成的结构决定了其力学特性。原状及重塑黄土因结构的差异而具有不同的力学特性。针对黄土结构性如何影响其力学特征这一基本问题,开展基于电镜扫描获取细观颗粒信息,同时考虑颗粒形状、颗粒破碎可能性进行建模的离散单元法进行原状黄土和饱和重塑土在恒定应变速率双轴试验下的宏观力学和细观力学性能研究。研究结果显示:试样微观结构的差异对变形破坏过程产生显著影响。当轴向应力较低时原状黄土及重塑黄土力链多分布于大型骨架颗粒附近,随着轴向应力增加,原状黄土力链形成网状图案但仍具备主要传导区域,重塑黄土无明显主要传导区,呈现均匀网状。原状土及重塑土骨架颗粒簇周围多形成张拉裂隙,剪切裂隙多数形成于骨架颗粒簇内部,又以颗粒簇相互挤压接触时最为明显。使用该建模方法,可以有效反映原状及重塑黄土由于内部结构组成差异导致相同应力条件下产生的不同内部应力状态。基于以上研究结论,给出了黄土结构性对宏观强度影响的微观解释。研究成果可为黄土地区地质灾害防治提供一定依据。使用该建模方法,可以有效反映原状及重塑黄土由于内部结构组成差异导致相同应力条件下产生的不同内部应力状态。基于以上研究结论,给出了黄土结构性对宏观强度影响的微观解释。 相似文献
20.
黄土高原不同地貌类型对应的地形起伏变化特征各不相同,地形起伏在不同方向上的变化特征具有很大差异性,即地形各向异性。本文引入多重分形谱参数描述不同地貌类型地形各向异性的变化规律,以反映不同黄土地貌地形各向异性的局部和整体变化格局。本研究以5 m分辨率的DEM数据为基础,选取淳化、甘泉、绥德3个典型黄土塬梁峁地貌类型研究样区,对其地形各向异性的变化特征进行分析。研究表明:①3种黄土地貌类型地形各向异性变化具有显著的多重分形特征,地形各向异性变化的奇异强度由强到弱依次为淳化、绥德、甘泉;②淳化样区地形各向异性奇异强度在1.4的概率最大,在奇异强度为2.2附近又有一个小的峰值,总体以奇异强度1.4为主;③甘泉样区的奇异强度在1.8有一个小的峰值,总体以奇异强度0.7为主;④绥德样区奇异强度为0.8的概率最大,且较为均匀地分布在0.8附近,地形各向异性的概率分布呈现为对称分布。研究结果为黄土塬梁峁地形各向异性变化奇异强度为黄土塬最大,黄土峁次之,黄土梁最小。该研究可为黄土地貌的精确分类提供定量信息支持,为区域水土侵蚀评价提供地形指标。 相似文献