首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The Gnargoo structure is located on the Gascoyne Platform, Southern Carnarvon Basin, Western Australia, and is buried beneath about 500 m of Cretaceous and younger strata. The structure is interpreted as being of possible impact origin from major geophysical and morphometric signatures, characteristic of impact deformation, and its remarkable similarities with the proven Woodleigh impact structure, about 275 km to the south on the Gascoyne Platform. These similarities include: a circular Bouguer anomaly (slightly less well-defined at Gnargoo than at Woodleigh); a central structurally uplifted area comprising a buried dome with a central uplifted plug; and the lack of a significant magnetic anomaly. Gnargoo shows a weakly defined inner 10 km-diameter circular Bouguer anomaly surrounded by a broadly circular zone, ～75 km in diameter. The north?–?south Bouguer anomaly lineament of the Giralia Range (a regional topographic and structural feature) terminates abruptly against the outer circular zone which is, in turn, intersected on the eastern flank by the Wandagee Fault. A <?28 km-diameter layered sedimentary dome of Ordovician to Lower Permian strata, surrounding a cone-shaped, central uplift plug of 7?–?10 km diameter, are inferred from the seismic data. Seismic-reflection data indicate a minimum central structural uplift of 1.5 km, as compared to a model uplift of 7.3 km calculated from the outer structural diameter. An interpretation of Gnargoo in terms of a plutonic or volcanic caldera/ring origin is unlikely as these features display less regular geometry, are typically smaller and no volcanic rocks are known in the onshore Gascoyne Platform. An interpretation of Gnargoo as a salt dome is likewise unlikely because salt structures tend to have irregular geometry, and no extensive evaporite units are known in the Southern Carnarvon Basin. Morphometric estimates of the rim-to-rim diameter based on seismic data for the central dome correspond to the observed diameter deduced from gravity data, and fall within the range of morphometric parameters of known impact structures. The age of Gnargoo is constrained between the deformed Lower Permian target rocks and unconformably overlying undeformed Lower Cretaceous strata. Because of its large dimensions, if Gnargoo is an impact structure, it may have influenced an environmental catastrophe during this period.  相似文献   

2.
A ～400 km long deep crustal reflection seismic survey was acquired in central Victoria, Australia, in 2006. It has provided information on crustal architecture across the western Lachlan Orogen and has greatly added to the understanding of the tectonic evolution. The east-dipping Moyston Fault is confirmed as the suture between the Delamerian and western Lachlan Orogens, and is shown to extend down to the Moho. The Avoca Fault, the boundary between the Stawell and Bendigo Zones, is a west-dipping listric reverse fault that intersects the Moyston Fault at a depth of about 22 km, forming a V-shaped geometry. Both the Stawell and Bendigo Zones can be divided broadly into a lower crustal region of interlayered and imbricated metavolcanic and metasedimentary rocks and an upper crustal region of tightly folded metasedimentary rocks. The Stawell Zone was probably part of a Cambrian accretionary system along the eastern Gondwanaland margin, and mafic rocks may have been partly consumed by Cambrian subduction. Much of the Early Cambrian oceanic crust beneath the Bendigo Zone was not subducted, and is preserved as a crustal-scale imbricate thrust stack. The seismic data have shown that a thin-skinned structural model appears to be valid for much of the Melbourne Zone, whereas the Stawell and Bendigo Zones have a thick-skinned structural style. Internal faults in the Stawell and Bendigo Zones are mostly west-dipping listric faults, which extend from the surface to near the base of the crust. The Heathcote Fault Zone, the boundary between the Bendigo and Melbourne Zones, extends to at least 20 km, and possibly to the Moho. A striking feature in the seismic data is the markedly different seismic character of the mid to lower crust of the Melbourne Zone. The deep seismic reflection data for the Melbourne Zone have revealed a multilayered crustal structure that supports the Selwyn Block model.  相似文献   

3.
Strain reversal of structural/stratigraphic profiles at different scales in the western Lachlan Orogen provides a perspective on original crustal thickness estimates, the former depositional basin width of the proto-western Lachlan Orogen, the original sedimentary-fan thickness, and the possible length extent of lower crust lost by subduction. Retrodeformation using strain-reversal techniques allows basin reconstruction giving an original width of the western Lachlan Orogen basin receptor of between 800 km (minimum) and ～1150 km (maximum), depending on the amount of stratal duplication allowed in the turbidites. Crude area balancing of the regional cross-section, adding in sectional volume lost by erosion and assuming strain compatibility between the upper and lower crust, suggests that the predeformation crustal thickness ranges between 15 km and ～21 km, with a lower crustal thickness (oceanic lithosphere) of ～9 km and a turbidite fan thickness of ～6 km (minimum) and ～12 km (maximum allowable), respectively. Disparity between the calculated fan thickness and that derived from measured stratigraphic sections adjusted for strain (～6 km) indicates that some form of crustal stacking must be important in structural thickening of the turbidite crustal component. By varying shortening due to fault stacking, mass balance dictates the mismatch of the upper crustal (uc) and lower crustal (lc) retrodeformed lengths, and therefore provides an estimate of lower crustal loss by subduction. End members range from: (i) a 12 km-thick fan without fault duplication, a basin width of ～800 km where uc = lc giving no lower crustal loss by subduction; to (ii) a ～6 km fan, requiring duplication by faulting, a basin of ～1150 km where uc > lc, and ～360 km of lower crust length (～30%) lost by subduction. This suggests that the total thickness of underplated igneous material in the western Lachlan Orogen is low, probably < ～2 km.  相似文献   

4.
The Glikson structure is an aeromagnetic and structural anomaly located in the Little Sandy Desert of Western Australia (23°59'S, 121°34′E). Shatter cones and planar microstructures in quartz grains are present in a highly deformed central region, suggesting an impact origin. Circumferential shortening folds and chaotically disposed bedding define a 19 km-diameter area of deformation. Glikson is located in the northwestern Officer Basin in otherwise nearly flat-lying sandstone, siltstone and conglomerate of the Neoproterozoic Mundadjini Formation, intruded by dolerite sills. The structure would not have been detected if not for its strong ring-shaped aeromagnetic anomaly, which has a 10 km inner diameter and a 14 km outer diameter. We interpret the circular magnetic signature as the product of truncation and folding of mafic sills into a ring syncline. The sills most likely correlate with dolerites that intrude the Boondawari Formation ～25 km to the north, for which we report a SHRIMP U?–?Pb baddeleyite and zircon age of 508?±?5 Ma, providing a precise older limit for the impact event that formed the Glikson structure.  相似文献   

5.
A deep seismic‐reflection transect in western Victoria was designed to provide insights into the structural relationship between the Lachlan and the Delamerian Orogens. Three seismic lines were acquired to provide images of the subsurface from west of the Grampians Range to east of the Stawell‐Ararat Fault Zone. The boundary between the Delamerian and Lachlan Orogens is now generally considered to be the Moyston Fault. In the vicinity of the seismic survey, this fault is intruded by a near‐surface granite, but at depth the fault dips to the east, confirming recent field mapping. East of the Moyston Fault, the uppermost crust is very weakly reflective, consisting of short, non‐continuous, west‐dipping reflections. These weak reflections represent rocks of the Lachlan Orogen and are typical of the reflective character seen on other seismic images from elsewhere in the Lachlan Orogen. Within the Lachlan Orogen, the Pleasant Creek Fault is also east dipping and approximately parallel to the Moyston Fault in the plane of the seismic section. Rocks of the Delamerian Orogen in the vicinity of the seismic line occur below surficial cover to the west of the Moyston Fault. Generally, the upper crust is only weakly reflective, but subhorizontal reflections at shallow depths (up to 3 km) represent the Grampians Group. The Escondida Fault appears to stop below the Grampians Group, and has an apparent gentle dip to the east. Farther east, the Golton and Mehuse Faults are also east dipping. The middle to lower crust below the Delamerian Orogen is strongly reflective, with several major antiformal structures in the middle crust. The Moho is a slightly undulating horizon at the base of the highly reflective middle to lower crust at 11–12 s TWT (approximately 35 km depth). Tectonically, the western margin of the Lachlan Orogen has been thrust over the Delamerian Orogen for a distance of at least 25 km, and possibly over 40 km.  相似文献   

6.
ABSTRACT

The South China Sea (SCS) is an excellent site for studying the process of conjugate margin rifting, and the origin and evolution of oceanic basins. Compared with the well-defined northern margin of the SCS, the western and southern segments of the SCS margin have not been researched in significant detail. To investigate the regional structure of the southwestern SCS, a gravity model is constructed, along with the lithospheric thermal structure along a wide-angle seismic profile. The profile extends across the conjugate margins of the Southwest Sub-Basin (SWSB) of the SCS and is based on the latest multiple geophysical measurements (including heat flow and thermo-physical parameters). The results show that the average thicknesses of the crust and thermal lithosphere along the profile are about 15 km and 57 km, respectively. The overall amount of extension of continental crust and lithosphere is more than 200 km. Thermal structure of the lithosphere shows that the continental margins are in a warm thermal state. The southwest SCS is characterized by ultra-wide, thinned continental crust and lithosphere, high Moho heat flow, early syn-rift faulted basins, undeformed late syn-rifting, and high seismic velocities in the lower crust. These various pieces of evidence suggest that the break-up of the mantle lithosphere occurred before that of the continental crust favouring a depth-dependent extension of the southwestern SCS margin.  相似文献   

7.
Eight two-dimensional, multichannel seismic reflection lines were acquired, processed, and interpreted to study the structure of the Altar Basin, which is part of the Salton Trough tectonic province. We identified two basin-bounding zones characterized by different degrees of strain: the Cerro Prieto–Altar deformation zone (CPADZ) and the Altar–Caborca deformation zone (ACDZ). The CPADZ is bounded on the west by the Cerro Prieto fault and on the east by the Altar fault. To the north, the strike of both faults changes slightly from a NW to more NNW direction. In the CPADZ, the thickness of the crust decreases southward towards the Gulf of California, and is associated with a deformation-developing fault. The CPADZ has a rotation component orientating these faults in an oblique direction to the Cerro Prieto fault, whereas within the ACDZ, a geometric coherence of synthetic and antithetic faults exists, creating horsts and graben striking N37° W. The Altar fault is recognized by basement interruption, with a vertical component of ～1 km, striking at N37° W and dipping 83° SW. On the northeastern side of the Altar Basin, the basement configuration shows that the minimum time of basement record (～0.4 s of two-way travel time) and the time curve gradient decrease in the NE–SW direction. The depocentre is ～6 km deep in the central-west portion of the basin. We identified a graben between the Rosario and Tinajas Altas mountains (Rosario Basin). The extension–connection of the Altar and Rosario basins to the south is not well defined; nevertheless, these basins could represent the link between the Colorado River and the Gulf of California during the late Miocene, whereas this link was abandoned in the Pliocene as subsidence migrated towards the northwest into the Cerro Prieto and Laguna Salada basins.  相似文献   

8.
The Gulpuliyul structure is the eroded remains of a possible impact structure of Mesoproterozoic age, in western Arnhem Land, Northern Territory, on the Arnhem Shelf of the northwestern McArthur Basin. Enigmatic, highly deformed and brecciated strata, within the roughly circular or pentagonal feature about 8.5 km across, contrast with mildly deformed rocks of the surrounding Arnhem Shelf. Shock-metamorphic features have yet to be observed. Other features of the Gulpuliyul Structure are: (i) sharp and faulted outer boundaries; (ii) strata within the structure are younger than adjacent country rocks; i.e., the rocks have been emplaced downwards into the structure; (iii) outcrops display an overall concentric or tangential pattern, the stratigraphy is essentially coherent, and there is an overall younging from the centre outwards; and (iv) strata are commonly overturned by southward-directed thrusting and recumbent folding. It is suggested that the projectile impacted at a shallow angle from the north, to produce a southward-deepening crater about 8.5 km across. The depth of the transient crater was probably between ～500?–?700 m (minimum) and ～800 m (maximum). The central uplift probably rebounded only about 300?–?400 m. The present erosion level is thought to lie near the top of the low central uplift, at about or just below the floor of the final crater. The age of the possible impact is Mesoproterozoic (ca 1600?–?1325 Ma); it is most likely to have occurred very early in the Mesoproterozoic (1600?–?1500 Ma).  相似文献   

9.
ABSTRACT

New analysis of the geophysical data of the ultraslow-spreading Mohns Ridge and its off-axis structure reveals a distinctive asymmetric structure. We calculate residual bathymetry (RB) and residual mantle Bouguer gravity anomaly (RMBA) and decompose the anomalies into symmetric and asymmetric components between the ridge conjugates. The western flank of the Mohns Ridge at crustal age of ~50–15 Ma is characterized by a broad zone of elevated RB and more negative RMBA, which we term the Vesteris Plateau (VP). The VP anomaly has a surface area of ~1.12 × 105 km2 and an excess crust volume of ~2.33 × 105 km3, making it a significant anomaly comparable to other anomalies such as the Bermuda Rise. Extending north of the Kolbeinsey Ridge for more than 500 km, the VP lies above an anomalous upper mantle region of low shear-wave seismic velocity, indicating that the VP might represent the northernmost reach of the Iceland-Jan Mayen mantle anomaly. In addition, the western ridge flank of the Mohns Ridge at crustal age of 6–0 Ma is associated with higher RB and more positive RMBA relative to the eastern conjugate, indicating tectonic uplift and associated exposure of lower crust and upper mantle near the ridge axis.  相似文献   

10.
New deep seismic reflection data provide images of the crust and uppermost mantle underlying the eastern Middle Urals and adjacent West Siberian Basin. Distinct truncations of reflections delineate the late-orogenic strike-slip Sisert Fault extending vertically to ∼28 km depth, and two gently E-dipping reflection zones, traceable to 15–18 km depth, probably represent normal faults associated with the opening of the West Siberian Basin. A possible remnant Palaeozoic subduction zone in the lower crust under the West Siberian Basin is visible as a gently SW-dipping zone of pronounced reflectivity truncated by the Moho. Continuity of shallow to intermediate-depth reflections suggest that Palaeozoic accreted island-arc terranes and overlying molasse sequences exposed in the hinterland of the Urals form the basement for Triassic and younger deposits in the West Siberian Basin. A highly reflective lower crust overlies a transparent mantle at about 43 km depth along the entire 100 km long seismic reflection section, suggesting that the lower crust and Moho below the eastern Middle Urals and West Siberian Basin have the same origin.  相似文献   

11.
《Tectonophysics》1987,142(1):49-70
From densely covered seismic refraction data obtained in 1978 (Urach experiment) and 1984 (“Schwarzer Zollern-Wald” experiment) and from seismic reflection data and results from previous refraction investigations, a three-dimensional crustal model of southwest Germany was derived. Travel-time and amplitude information of seismic refraction data were interpreted with two-dimensional forward modeling (ray tracing) to calculate two crustal cross sections in southwest Germany. These results fill a gap in the existing data and enabled the construction of a detailed three-dimensional crustal model.While seismically the upper crust is laterally homogeneous (5.9–6.0 km/s) throughout the area, the middle and lower crust show pronounced lateral variations in thickness, velocity, and reflectivity. The Moho is a flat surface at a relatively shallow depth (25–26 km). We classify the middle and lower crust of southwest Germany into two characteristic crustal types. Type I consists of a mid-crustal low-velocity zone (5.4–5.8 km/s) overlying a thick (> 10 km), high-velocity (6.6–6.8 km/s) lower crust. Type II has no prominent mid-crustal low-velocity zone, and a thin (< 10 km), low-velocity (6.3–6.4 km/s) lower crust. The crustal types correlate with the major geologic units exposed in the area: Type I is present beneath the Black Forest, forming the eastern flank of the Rhinegraben and beneath the Swabian Jura, while Type II is present beneath the intervening Triassic sediments. Beneath the South German Molasse Basin, a low-velocity zone is also present in the upper middle-crust. Seismic reflection investigations have shown that the lower crust in southwest Germany comprises a stack of layers of alternating high- and low-velocities. The lateral variation of the reflectivity of this laminated lower crust has been recognized even on refraction data. We found that high-reflectivity of the lower crust correlates to high average velocity (6.7–6.8 km/s) in the lower crust (Type I). Thus, the average velocity of the lower crust in southwest Germany seems to be an indicator of the intensity of its lamination. The uppermost mantle has a velocity of 8.3 km/s in the area and a strong, positive velocity gradient.  相似文献   

12.
This paper reviews the complex crustal and upper-mantle seismic velocity structure of Ireland and surrounding seas. Data from 11 seismic refraction profiles reveal that onshore Ireland mean crustal velocities range between 6.25 and 6.5 km s−1 with crustal thickness of 28.5–32 km. Superimposed on a three-layer crust, the sedimentary layer has a thickness of approximately 6–8 km at the southern coastline, but only 3–4 km in the vicinity of the Shannon Estuary in western Ireland. The lateral heterogeneity of the upper-crustal layer is pervasive throughout Ireland, with velocities of 5.7–6.2 km s−1 and a layer thickness of 3–10 km. A low-velocity zone is found in the south-east which is interpreted as the buried south-western extension of the Leinster Granite. The mid-crustal layer (6.3–6.7 km s−1) is between 8 and 16 km thick. Significant changes occur in the vicinity of the Shannon Estuary, around the location of the Iapetus Suture Zone. The lower crust is fairly uniform with velocities of 6.8–7.2 km s−1 and a thickness of approximately 8–10 km except towards the south of Ireland where the Moho appears as a transition zone. Offshore Ireland, a two-layer crust with a thickness of 24–26 km beneath the North Celtic Sea Basin and only 14–15 km beneath the Rockall Trough prevails.  相似文献   

13.
By compiling wide-angle seismic velocity profiles along the 400-km-long Lofoten–Vesterålen continental margin off Norway, and integrating them with an extensive seismic reflection data set and crustal-scale two-dimensional gravity modelling, we outline the crustal margin structure. The structure is illustrated by across-margin regional transects and by contour maps of depth to Moho, thickness of the crystalline crust, and thickness of the 7+ km/s lower crustal body. The data reveal a normal thickness oceanic crust seaward of anomaly 23 and an increase in thickness towards the continent–ocean boundary associated with breakup magmatism. The southern boundary of the Lofoten–Vesterålen margin, the Bivrost Fracture Zone and its landward prolongation, appears as a major across-margin magmatic and structural crustal feature that governed the evolution of the margin. In particular, a steeply dipping and relatively narrow, 10–40-km-wide, Moho-gradient zone exists within a continent–ocean transition, which decreases in width northward along the Lofoten–Vesterålen margin. To the south, the zone continues along the Vøring margin, however it is offset 70–80 km to the northwest along the Bivrost Fracture Zone/Lineament. Here, the Moho-gradient zone corresponds to a distinct, 25-km-wide, zone of rapid landward increase in crustal thickness that defines the transition between the Lofoten platform and the Vøring Basin. The continental crust on the Lofoten–Vesterålen margin reaches a thickness of 26 km and appears to have experienced only moderate extension, contrasting with the greatly extended crust in the Vøring Basin farther south. There are also distinct differences between the Lofoten and Vesterålen margin segments as revealed by changes in structural style and crustal thickness as well as in the extent of elongate potential-field anomalies. These changes may be related to transfer zones. Gravity modelling shows that the prominent belt of shelf-edge gravity anomalies results from a shallow basement structural relief, while the elongate Lofoten Islands belt requires increased lower crustal densities along the entire area of crustal thinning beneath the islands. Furthermore, gravity modelling offers a robust diagnostic tool for the existence of the lower crustal body. From modelling results and previous studies on- and off-shore mid-Norway, we postulate that the development of a core complex in the middle to lower crust in the Lofoten Islands region, which has been exhumed along detachments during large-scale extension, brought high-grade, lower crustal rocks, possibly including accreted decompressional melts, to shallower levels.  相似文献   

14.
Christoffer Nielsen  H. Thybo   《Tectonophysics》2009,470(3-4):298-318
The Cenozoic Baikal Rift Zone (BRZ) is situated in south-central Siberia in the suture between the Precambrian Siberian Platform and the Amurian plate. This more than 2000-km long rift zone is composed of several individual basement depressions and half-grabens with the deep Lake Baikal at its centre. The BEST (Baikal Explosion Seismic Transect) project acquired a 360-km long, deep seismic, refraction/wide-angle reflection profile in 2002 across southern Lake Baikal. The data from this project is used for identification of large-scale crustal structures and modelling of the seismic velocities of the crust and uppermost mantle. Previous interpretation and velocity modelling of P-wave arrivals in the BEST data has revealed a multi layered crust with smooth variation in Moho depth between the Siberian Platform (41 km) and the Sayan-Baikal fold belt (46 km). The lower crust exhibits normal seismic velocities around the rift structure, except for beneath the rift axis where a distinct 50–80-km wide high-velocity anomaly (7.4–7.6 ± 0.2 km/s) is observed. Reverberant or “ringing” reflections with strong amplitude and low frequency originate from this zone, whereas the lower crust is non-reflective outside the rift zone. Synthetic full-waveform reflectivity modelling of the high-velocity anomaly suggests the presence of a layered sequence with a typical layer thickness of 300–500 m coinciding with the velocity anomaly. The P-wave velocity of the individual layers is modelled to range between 7.4 km/s and 7.9 km/s. We interpret this feature as resulting from mafic to ultra-mafic intrusions in the form of sills. Petrological interpretation of the velocity values suggests that the intrusions are sorted by fractional crystallization into plagioclase-rich low-velocity layers and pyroxene- and olivine-rich high-velocity layers. The mafic intrusions were probably intruded into the ductile lower crust during the main rift phase in the Late Pliocene. As such, the intrusive material has thickened the lower crust during rifting, which may explain the lack of Moho uplift across southern BRZ.  相似文献   

15.
Temporary local seismic networks were installed in western Crete, in central Crete, and on the island Gavdos south of western Crete, respectively, in order to image shallow seismically active zones of the Hellenic subduction zone.More than 4000 events in the magnitude range between −0.5 and 4.8 were detected and localized. The resulting three-dimensional hypocenter distribution allows the localization of seismically active zones in the area of western and central Crete from the Mediterranean Ridge to the Cretan Sea. Furthermore, a three-dimensional structural model of the studied region was compiled based on results of wide-angle seismics, surface wave analysis and receiver function studies. The comparison of the hypocenter distribution and the structure has allowed intraplate and interplate seismicity to be distinguished.High interplate seismicity along the interface between the subducting African lithosphere and the Aegean lithosphere was found south of western Crete where the interface is located at about 20 to 40 km depth. An offset between the southern border of the Aegean lithosphere and the southern border of active interplate seismicity is observed. In the area of Crete, the offset varies laterally along the Hellenic arc between about 50 and 70 km.A southwards dipping zone of high seismicity within the Aegean lithosphere is found south of central Crete in the region of the Ptolemy trench. It reaches from the interface between the plates at about 30 km depth towards the surface. In comparison, the Aegean lithosphere south of western Crete is seismically much less active including the region of the Ionian trench. Intraplate seismicity within the Aegean plate beneath Crete and north of Crete is confined to the upper about 20 km. Between 20 and 40 km depth beneath Crete, the Aegean lithosphere appears to be seismically inactive. In western Crete, the southern and western borders of this aseismic zone correlate strongly with the coastline of Crete.  相似文献   

16.
The magnetotelluric (MT) method was used to image the crust and upper mantle beneath the Delamerian and Lachlan orogens in western Victoria, Australia. During the Cambrian time period, this region changed from being the extended passive margin of Proterozoic Australia into an Andean-style convergent margin that progressively began to accrete younger oceanic terranes. Several broadband MT transects, which were collected in stages along coincident deep (full crust imaging) seismic reflection lines, have now been combined to create a continuous 500 km east–west transect over the Delamerian–Lachlan transition region in the Stawell Zone. We present the electrical resistivity structure of the lithosphere using both 3D and 2D inversion methods. Additionally, 1D inversions of long-period AusLAMP (Australian Lithospheric Architecture Magnetotelluric Project) MT data on a 55 km regionally spaced grid were used to provide starting constraints for the 3D inversion of the 2D profile. The Delamerian to Lachlan Orogen transition region coincides with the Mortlake Discontinuity, which marks an isotopic discontinuity in Cenozoic basalts, with higher strontium isotope enrichment ratios in the Lachlan Orogen relative to the Delamerian Orogen. Phase tensor ellipses of the MT data reveal a distinct change in electrical resistivity structure near the location of the Mortlake Discontinuity, and results of 3D and 2D inversions along the MT profile image a more conductive lower crust and upper mantle beneath the Lachlan Orogen than the Delamerian Orogen. Increased conductivity is commonly ascribed to mantle enrichment and thus supports the notion that the isotope enrichment of the Cenozoic basalts at least partially reflects an enriched mantle source rather than crustal contamination. Fault slivers of the lower crust from the more conductive Lachlan region expose Cambrian boninites and island arc andesites indicative of subduction, a process that can enrich the mantle isotopically, and also electrically, by introducing carbon (graphite) and water (hydrogen).  相似文献   

17.
Abu-Dabbab area is the most active seismic zone in the central Eastern Desert of Egypt, where seismic activities are daily recorded. The reported earthquakes are microearthquakes of local magnitudes (ML < 2.0). A spatial distribution of these microearthquakes shows that the earthquakes of the area follow an ENE–WSW trending pattern, which is nearly perpendicular to the Red Sea Rift. Focal mechanisms of different fault styles were recognized with dominant normal faulting (with a strike-slip component) events characterized by focal depths greater than 7 km and reverse ones of shallower focal depths. Several lines of evidence indicating that the brittle-ductile transition zone underlies the Abu-Dabbab area occurs at a relatively shallow depth (10–12 km) and it is acting as a low-angle normal shear zone (LANF). Field-structural, EMR and seismic data (this study) reveal that the maximum compressive stress (σ1) in the area is perturbed from the regional NW–SE direction to ENE–WSW orientation. This stress rotation is evidently akin to the reactivation of the crustal scale Najd Fault System (NFS), where such reactivation is attributed to the ongoing activity/opening of the Red Sea. Our tectonic model proposes that the continuous activity on the brittle-ductile transition zone including the LANF led to stress localization, which triggering a brittle deformation in the upper crustal-levels and associated shallow dipping thrusts. Such bimodal tectonic model suggests that the deep earthquakes are owing to the tectonic movement on the LANF (transtension), whereas the shallow earthquakes are related to a brittle deformation inside the fault blocks of the upper crust (transpression). Deformation creep along this zone didn’t permit continuous accumulation of strain and hence reduce the possible occurrence of large earthquakes.  相似文献   

18.
We herein present a new seismic refraction/wide-angle reflection profile that crosses the Songpan–Ganzi terrane, the Animaqing suture zone and the eastern Kunlun mountains (comprised of the South Kunlun and Middle Kunlun blocks separated by the Middle Kunlun fault). The profile is 380 km long and extends from Moba to Guide in eastern Tibet. The crustal thickness is about 62 km under the Songpan–Ganzi terrane, 62–64 km under the South Kunlun, and 60 km under the Middle Kunlun block. The Songpan–Ganzi flysch seems to be present up to a depth of 15 km south of the Animaqing suture zone, and up to a depth of 10 km in the Middle Kunlun block, with thicknesses elsewhere that depend on assumptions about the likely lithologies. The profile exhibits clear lateral variations both in the upper and lower crust, which are indicative of different crustal blocks juxtaposed by the Kunlun fault system. Whether or not the Songpan–Ganzi flysch was originally deposited on oceanic crust, at the longitude of our profile (100°E) it is now underlain by continental crust, and the presence of continental crust beneath the Songpan–Ganzi terrane and of a continental arc under the South Kunlun block suggest Paleozoic continent–continent arc collision in the eastern Kunlun Mountains. Comparison of crustal velocity columns from all wide-angle seismic profiles across the eastern Kunlun mountains indicates a remarkable west-to-east change in the Moho topography across the Kunlun fault system (15–20 km Moho step at 95°E, but only 2–5 km along our profile at 100°E). Lower-crustal thickness of the Kunlun terranes is rather uniform, about 35 km, from 80°–95°E, which suggests that similar thrust-thickening processes have played a role where the Qaidam Basin abuts the Kunlun fault, but thins to 20–25 km at 100°E, east of the Qaidam Basin. The increased crustal thickness from 93° to 98°E compared to that at 100°E may be due to the differences in the thickness of the crust of the two plates before their collision, and/or largely achieved by thickening of the lower crust, perhaps indicating a crustal flow mechanism operating more strongly in the western region.  相似文献   

19.
Shear wave velocities of the lithospheric structure to 73 km depth have been defined along three profiles crossing the Campanian Plain (Southern Italy) from the simultaneous non linear inversion of the local and regional dispersion data. The former consist of group velocity dispersion data obtained from some seismic events which occurred at the borders of the Campanian Plain and recorded at Napoli, and the latter of group and phase dispersion data obtained in previous studies. The main features of the representative VS models are a carbonate basement deepening to ～5 km in the central part of the Plain and a low velocity zone at a depth of ～15 km, rising to 7 km in the southern part, close to Somma-Vesuvio. The low velocity layer can be correlated with that found at ～10 km of depth below Campi Flegrei and the Neapolitan area, and at 5 km below the Somma-Vesuvio caldera area. Such regional velocity reduction can be associated to the presence of a zone with less than 5% partial melting that can be interpreted as magmatic reservoir of the Campanian volcanism.  相似文献   

20.
The basement rocks of the poorly understood Thomson Orogen are concealed by mid-Paleozoic to Upper Cretaceous intra-continental basins and direct information about the orogen is gleaned from sparse geological data. Constrained potential field forward modelling has been undertaken to highlight key features and resolve deeply sourced anomalies within the Thomson Orogen. The Thomson Orogen is characterised by long-wavelength and low-amplitude geophysical anomalies when compared with the northern and western Precambrian terranes of the Australian continent. Prominent NE- and NW-trending gravity anomalies reflect the fault architecture of the region. High-intensity Bouguer gravity anomalies correlate with shallow basement rocks. Bouguer gravity anomalies below –300 µm/s2 define the distribution of the Devonian Adavale Basin and associated troughs. The magnetic grid shows smooth textures, punctuated by short-wavelength, high-intensity anomalies that indicate magnetic contribution at different crustal levels. It is interpreted that meta-sedimentary basement rocks of the Thomson Orogen, intersected in several drill holes, are representative of a seismically non-reflective and non-magnetic upper basement. Short-wavelength, high-intensity magnetic source bodies and colocated negative Bouguer gravity responses are interpreted to represent shallow granitic intrusions. Long-wavelength magnetic anomalies are inferred to reflect the topography of a seismically reflective and magnetic lower basement. Potential field forward modelling indicates that the Thomson Orogen might be a single terrane. We interpret that the lower basement consists of attenuated Precambrian and mafic enriched continental crust, which differs from the oceanic crust of the Lachlan Orogen further south.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号