首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 698 毫秒
1.
The assessment of seismic hazard at five selected sites in the Sannio-Matese region is based on the computer program SRAMSC. Owing to the extensive historical data base for the output parameter, the MSK intensiy is chosen. The seismicity model is made up of five narrow area seismic sources. Circular or elliptical macroseismic fields are assigned to individual sources. A generalized Kövesligethy equation is used for this purpose as the attenuation relationship. The study reveals similar and a rather high hazard at the sites at Benevento, Boiano, and Melfi, which are located in the zone of highest seismic activity. At the Pomigliano and Lucera sites, the assessed hazard is much lower.  相似文献   

2.
We tested a new hybrid method for the evaluation of seismic hazard. A recently proposed fault segmentation and earthquake recurrence model of peninsular Italy suggests that the interval for which the local historical catalogue is complete is shorter than the mean recurrence time of individual large faults (1000 years), or at the most comparable. These new findings violate the fundamental assumption of historical probabilistic seismic hazard methods that the historical record is representative of the activity of all the seismogenic sources. The hybrid method we propose uses time-dependent modelling of the major earthquakes and catalogue-based historical probabilistic estimates for all minor events. We assume that the largest earthquakes are characteristic for individual discrete fault segments, model their probability of occurrence by a renewal process and compute the shaking associated with each of them with a simplified procedure. Then we calculate the probability of exceeding a given threshold of peak ground acceleration for specific sites as the aggregate probability of occurrence of large characteristic earthquakes and minor shocks. We apply the method to the Calabrian Arc (Southern Italy) performing the calculations for five major towns. The exposure to seismic hazard of Reggio Calabria, Catanzaro and Vibo Valentia, which locate close to recently activated large faults, decreases with respect to traditional time-independent estimates. On the contrary, an increase of seismic hazard is obtained for Castrovillari, which locates in an area where large faults displaying Holocene activity have been recently recognized but no significant earthquake is reported in the historical catalogue. Cosenza has the highest probability to experience a significant peak ground acceleration with both the new hybrid and the traditional approaches. We wish to stress that the present results should be interpreted only in terms of the differences between the new hybrid and the traditional approaches, not for their absolute values, and that they are not intended to be used for updating or modifying the current national seismic zonation.  相似文献   

3.
The preparation of the preliminary seismic hazard maps of the territory of Slovenia has been based on an expansion of the basic approach laid out by Cornell in 1968. Three seismic source models were prepared. Two of them are based mainly on the earthquake catalogue using the Poissonian probability model. A map of seismic energy release and a map of earthquake epicenter density are used to delineate seismic sources in these models. The geometry of the third model which is based on a rough estimate of seismotectonic setting is taken from the probabilistic seismic hazard analysis of a nuclear power plant in Slovenia. Published ground motion attenuation models based on strong motion records of recent strong earthquakes in Italy are used. Test maps for variable and uniform b-values are presented. The computer program, Seisrisk III, developed by the U.S. Geological Survey is used.  相似文献   

4.
A semi-probabilistic approach to the seismic hazard assessment of Greece is presented. For this reason, a recent seismotectonic model for shallow and intermediate depth earthquake sources, based on historical as well as on instrumental data, was used. Different attenuation formulae were proposed for the macroseismic intensity and the strong ground motion parameters for the shallow and the intermediate focal depth shocks. The data were elaborated in terms of McGuire's computer program, which is based on the Cornell's method.A grid of equally spaced points at 20 km distance was made and the seismic hazard recurrence curves for various parameters of the seismic intensity was estimated for each point. Finally, seismic hazard maps for the area of Greece were compiled utilizing the entire range of recurrence curves. These maps depict areas of equal seismic hazard and for every area the analytical relations of the typeSI =f(Tm), whereSI is a seismic intensity parameter andTm is the mean return period, were determined.  相似文献   

5.
The most important seismic hazard parameters required to demarcate seismic zones are the peak horizontal acceleration (PHA) and spectral acceleration (SA). The two approaches for evaluation of seismic hazard are the probabilistic seismic hazard analysis and the deterministic seismic hazard analysis (DSHA). The present study evaluates the seismic hazard of the South Indian Peninsular region based on the DSHA methodology. In order to consider the epistemic uncertainties in a better manner, a logic tree approach was adopted in the evaluation of seismic hazard. Two types of seismic sources and three different attenuation relations were used in the analysis. The spatial variation of PHA (mean and 84th percentile values) and SA values for 1 Hz and 10 Hz at bedrock level (84th percentile values) for the entire study area were evaluated and the results are presented here. The surface level peak ground acceleration (PGA) values will be different from that of the bedrock level values due to the local site conditions. The PGA values at ground surface level were evaluated for four different National Earthquake Hazard Reduction Program site classes by considering the non-linear site response of different soil types. The response spectra for important cities in South India were also prepared using the deterministic approach and the results are presented in this paper.  相似文献   

6.
Although the U.K. is in an area of only low to moderate seismicity, the seismic hazard is sufficient to pose a threat to sensitive structures such as chemical plants and nuclear facilities. In quantifying the level of hazard by conventional probabilistic methodology, however, some problems arise in attempting to interpret earthquake data in terms of geological structure and faults. In the U.K., not only is it impossible to identify any demonstrably active faults, but also it is extremely difficult to discern any relationship between the pattern of seismicity and local or regional geological structure.This study discusses the use of two zonation approaches which complement each other in such a way that the general character and trend of seismicity is preserved. In one approach, the zonation is informed by the structural geology, where possible; geological zonation is avoided if it produces sources with heterogeneous seismicity. In the other approach, the record of past earthquakes is divided up into very small zones around individual epicentres or groups of epicentres, the size of each zone usually being proportional to the uncertainty in the epicentral determination of the appropriate event. This zonation preserves an observed tendency of some British earthquakes to repeat themselves. It is suggested that, in intraplate areas such as the U.K., it is often inappropriate to attempt to model individual fault sources. No faults in the U.K. are provably active. Because an earthquake of moderate size can occur on a very short fault segment, it is impractical to restrict fault modelling to major features. Even the two largest U.K. faults, suspected to be active, pose problems in attributing historical seismicity to them as distinct features.  相似文献   

7.
The need to revise the current Indonesian Seismic Hazard Map contained in Indonesian Earthquake Resistant Building Code SNI 03-1726-2002 which partially adopts the concept of UBC 1997, was driven among others by the desire to better reflect the potential larger earthquake disasters faced by the nation in the future. The much larger than maximum predicted Aceh Earthquake (M w 9.0–9.3) of 2004, followed by the destruction observed during the 2005 Nias Earthquake (M w 8.7) urgently underline to need to consider the new conceptual approach and technological shift shown in the transition of UBC 1997 to IBC 2006. This paper presents research works for developing spectral hazard maps for Indonesia. Some improvements in seismic hazard analysis were implemented using recent seismic records. Seismic sources were modeled by background, fault, and subduction zones by considering a truncated exponential model, pure characteristic model or both models. A logic tree method was performed to account for the epistemic uncertainty and several attenuation functions were selected. Maps of PGA and spectral accelerations for a short period (0.2 s) and for a 1-s period were then developed using a probabilistic approach. The maps will be proposed as a revision for the current seismic hazard map in the Indonesian Seismic Building Code.  相似文献   

8.
The region of interest is characterized by incomplete data sets and little information about the tectonic features. Therefore, two methodologies for estimating seismic hazard were used in order to elucidate the robustness of the results: the method of spatially smoothed seismicity introduced by Frankel (1995) and later extended by Lapajne et al. (1997) and a Monte Carlo approach presented by Ebel and Kafka (1999). In the first method, fault-rupture oriented elliptical Gaussian smoothing was performed to estimate future activity rates along the causative structures. Peak ground accelerations were computed for a grid size of 15 km × 415 km assuming the centre of the grids as epicentres, from which the seismic hazard map was produced. The attenuation relationship by Ambraseys et al. (1996) was found suitable for the region under study. PGA values for 10% probability of exceedence in 50 years (return period of 475 years) were computed for each model and a combined seismic hazard map was produced by subjectively assigning weights to each of these models. A worst-case map is also obtained by picking the highest value at each grid point from values of the four hazard maps. The Monte Carlo method is used to estimate seismic hazard, for comparison to the results from our previous approach. Results obtained from both methods are comparable except values in the first set of maps estimate greater hazard in areas of low seismicity. Both maps indicate a higher hazard along the main tectonic features of the east African and Red Sea rift systems. Within Eritrea, the highest PGA exceeded a value 25% of g, located north of Red Sea port of Massawa. In areas around the capital, Asmara, PGA values exceed 10% of g.  相似文献   

9.
  相似文献   

10.
A probabilistic seismic hazard assessment at Kancheepuram in Southern India was carried out with the scope of defining the seismic input for the vulnerability assessment of historical and monumental structures at the site, in terms of horizontal Uniform Hazard Spectra and a suite of spectrum-compatible natural accelerograms to perform time-history analysis. The standard Cornell?CMcGuire and a zone-free approach have been used for hazard computations after the compilation of a composite earthquake catalogue for Kancheepuram. Epistemic uncertainty in the seismic hazard was addressed within a logic-tree framework. Deaggregation of the seismic hazard for the peak ground acceleration shows low seismicity at Kancheepuram controlled by weak-to-moderate earthquakes with sources located at short distances from the archaeological site. Suites of natural accelerograms recorded on rock have been selected by imposing a custom-defined compatibility criterion with the probabilistic spectra. The site of Kancheepuram is characterized by a seismicity controlled by weak-to-moderate earthquakes with sources at short distances from the site, the PGA expected for 475- and 2,475-year return period are, respectively, 0.075 and 0.132?g. The Indian code-defined spectra (DBE and MCE) tend to underestimate spectral ordinates at low periods. On the other hand, the PGA are comparable and the spectral ordinates for longer periods from the probabilistic study are significantly lower.  相似文献   

11.
Seismic hazard analysis is based on data and models, which both are imprecise and uncertain. Especially the interpretation of historical information into earthquake parameters, e.g. earthquake size and location, yields ambiguous and imprecise data. Models based on probability distributions have been developed in order to quantify and represent these uncertainties. Nevertheless, the majority of the procedures applied in seismic hazard assessment do not take into account these uncertainties, nor do they show the variance of the results. Therefore, a procedure based on Bayesian statistics was developed to estimate return periods for different ground motion intensities (MSK scale).Bayesian techniques provide a mathematical model to estimate the distribution of random variables in presence of uncertainties. The developed method estimates the probability distribution of the number of occurrences in a Poisson process described by the parameter . The input data are the historical occurrences of intensities for a particular site, represented by a discrete probability distribution for each earthquake. The calculation of these historical occurrences requires a careful preparation of all input parameters, i.e. a modelling of their uncertainties. The obtained results show that the variance of the recurrence rate is smaller in regions with higher seismic activity than in less active regions. It can also be demonstrated that long return periods cannot be estimated with confidence, because the time period of observation is too short. This indicates that the long return periods obtained by seismic source methods only reflects the delineated seismic sources and the chosen earthquake size distribution law.  相似文献   

12.
Jens-Uwe Klügel   《Earth》2008,88(1-2):1-32
The paper is dedicated to the review of methods of seismic hazard analysis currently in use, analyzing the strengths and weaknesses of different approaches. The review is performed from the perspective of a user of the results of seismic hazard analysis for different applications such as the design of critical and general (non-critical) civil infrastructures, technical and financial risk analysis. A set of criteria is developed for and applied to an objective assessment of the capabilities of different analysis methods. It is demonstrated that traditional probabilistic seismic hazard analysis (PSHA) methods have significant deficiencies, thus limiting their practical applications. These deficiencies have their roots in the use of inadequate probabilistic models and insufficient understanding of modern concepts of risk analysis, as have been revealed in some recent large scale studies. These deficiencies result in the lack of ability of a correct treatment of dependencies between physical parameters and finally, in an incorrect treatment of uncertainties. As a consequence, results of PSHA studies have been found to be unrealistic in comparison with empirical information from the real world. The attempt to compensate these problems by a systematic use of expert elicitation has, so far, not resulted in any improvement of the situation. It is also shown that scenario-earthquakes developed by disaggregation from the results of a traditional PSHA may not be conservative with respect to energy conservation and should not be used for the design of critical infrastructures without validation. Because the assessment of technical as well as of financial risks associated with potential damages of earthquakes need a risk analysis, current method is based on a probabilistic approach with its unsolved deficiencies.

Traditional deterministic or scenario-based seismic hazard analysis methods provide a reliable and in general robust design basis for applications such as the design of critical infrastructures, especially with systematic sensitivity analyses based on validated phenomenological models. Deterministic seismic hazard analysis incorporates uncertainties in the safety factors. These factors are derived from experience as well as from expert judgment. Deterministic methods associated with high safety factors may lead to too conservative results, especially if applied for generally short-lived civil structures. Scenarios used in deterministic seismic hazard analysis have a clear physical basis. They are related to seismic sources discovered by geological, geomorphologic, geodetic and seismological investigations or derived from historical references. Scenario-based methods can be expanded for risk analysis applications with an extended data analysis providing the frequency of seismic events. Such an extension provides a better informed risk model that is suitable for risk-informed decision making.  相似文献   


13.
  相似文献   

14.
In the present study, the seismic hazard in the city of Patras, central Greece, is estimated. The computations are based on a slightly modified version of the method proposed by Cornell, allowing the introduction of individual attenuation laws for each seismic source.The obtained results emphasize the dependence of hazard on attenuation and the importance of the use of local attenuation laws in seismic hazard assessment.Paper presented at the 21st General Assembly of the European Seismological Commission, held in Sofia, 1988.  相似文献   

15.
CHEN  Y.  Liu  J.  Chen  L.  Chen  Q.  Chan  L. S. 《Natural Hazards》1998,17(3):251-267
A global seismic hazard assessment was conducted using the probabilistic approach in conjunction with a modified means of evaluating the seismicity parameters. The earthquake occurrence rate function was formulated for area source cells from recent instrumental earthquake catalogs. For the statistical application of the G–R relation of each source cell, the upper- and lower-bound magnitudes were determined from, respectively, historical earthquake data using a Kernel smoothing operator and detection thresholds of recent catalogs. The seismic hazard at a particular site was obtained by integrating the hazard contribution from influencing cells, and the results were combined with the Poisson distribution to obtain the seismic hazard in terms of the intensity at 10% probability of exceedance for the next 50 years. The seismic hazard maps for three countries, constructed using the same method, agree well with the existing maps obtained by different methods. The method is applicable to both oceanic and continental regions, and for any specific duration of time. It can be used for those regions without detailed geological information or where the relation between existing faults and earthquake occurrence is not clear.  相似文献   

16.
An indicator kriging model for investigation of seismic hazard   总被引：2，自引：0，他引：2  
Time domain probabilistic techniques most often are used for assessment of seismic hazard. Such techniques are based on the historic frequency of ground motion. Hazard is expressed as a probability of experiencing a particular level of seismic activity over a given length of time. One of these techniques utilizes frequency of extreme values for assessment of hazard. The major disadvantage of this technique, however, becomes evident when maximum seismic activity for two consecutive years occurs only a few weeks or months apart. In this case, the extreme value approach overestimates seismic hazard. A new approach for hazard assessment is founded on principles of indicator kriging. This technique evaluates seismic hazard as a simple frequency record, which is more realistic for regions of little to moderate seismicity.  相似文献   

17.
Moment tensors and micromechanical models   总被引：4，自引：0，他引：4  
A numerical modelling approach that simulates cracking and failure in rock and the associated seismicity is presented and a technique is described for quantifying the seismic source mechanisms of the modelled events. The modelling approach represents rock as an assemblage of circular particles bonded together at points of contact. The connecting bonds can break under applied stress forming cracks and fractures in the modelled rock. If numerical damping is set to reproduce realistic levels of attenuation, then energy is released when the bonds break and seismic source information can be obtained as damage occurs. A technique is described by which moment tensors and moment magnitudes can be calculated for these simulated seismic events. The technique basically involves integrating around the source and summing the components of force change at the surrounding particle contacts to obtain the elements of the moment tensor matrix. The moment magnitude is then calculated from the eigenvalues of the moment tensor. The modelling approach is tested by simulating a well-controlled experiment in which a tunnel is excavated in highly stressed granite while microseismicity is recorded. The seismicity produced by the model is compared to the actual recorded seismicity underground. The model reproduces the spatial and temporal distribution of seismicity observed around the tunnel and also the magnitudes of the events. A direct comparison between the actual and simulated moment tensors is not performed due to the two-dimensional nature of the model, however, qualitative comparisons are presented and it is shown that the model produces intuitively realistic source mechanisms. The ability to obtain seismic source information from the models provides a unique means for model validation through comparison with actual recorded seismicity. Once it is established that the model is performing in a realistic manner, it can then be used to examine the micromechanics of cracking, failure and the associated seismicity and to help resolve the non-uniqueness of the geophysical interpretation. This is demonstrated by examining in detail the mechanics of one of the modelled seismic events by observation of the time dependence of the moment tensor and by direct examination of the particle motions at the simulated source.  相似文献   

18.
The general philosophy of seismic hazard evaluation described here is appropriate for selection of seismic input to regional earthquake engineering codes prior to detailed on-site inspections and geotechnical assessments. Some probabilistic seismic hazard methodologies which can be applied in areas of low and high seismicity, are briefly described to emphasise the main equations with specimen results. Three aspects of hazard assessment are explored by different pathways. These include the analysis of regional earthquake catalogues to obtain magnitude recurrence, particularly using Gumbel extreme value statistics. This is extended to assess ground shaking hazard which is usually sought by earthquake engineers. Thirdly, the concept of earthquake perceptibility is developed, leading to the identification of an earthquake magnitude or type which is characteristic of a region. This most perceptible earthquake is most likely to be felt at any site in a region and provides an earthquake selection criterion which can be used in aseismic design of noncritical structures. Because there are several methods of seismic hazard evaluation, the view is expressed that it is sensible for practical purposes to seek results from different methods or different pathways to the hazard evaluation.Paper presented at the Commission of the European Communities' School on Earthquake Hazard Evaluation, Athens, and at the 21st General Assembly of the European Seismological Commission, held in Sofia, 1988.Now at School of Environmental Sciences, University of East Anglia, University Plain, Norwich NR4 7TJ, U.K.  相似文献   

19.
The objective of this study is to evaluate the seismic hazard at the Esfarayen-Bojnurd railway using the probabilistic seismic hazard assessment (PSHA) method. This method was carried out based on a recent data set to take into account the historic seismicity and updated instrumental seismicity. A homogenous earthquake catalogue was compiled and a proposed seismic sources model was presented. Attenuation equations that recently recommended by experts and developed based upon earthquake data obtained from tectonic environments similar to those in and around the studied area were weighted and used for assessment of seismic hazard in the frame of logic tree approach. Considering a grid of 1.2 × 1.2 km covering the study area, ground acceleration for every node was calculated. Hazard maps at bedrock conditions were produced for peak ground acceleration, in addition to return periods of 74, 475 and 2475 years.  相似文献   

20.
Mäntyniemi  P.  Mârza  V.  Kijko  A.  Retief  P. 《Natural Hazards》2003,29(3):371-385
In this paper we apply a probabilistic methodology to map specific seismic hazard induced by the Vrancea Seismogenic Zone, which represents the uttermost earthquake danger to Romania as well as its surroundings. The procedure is especially suitable for the estimation of seismic hazard at an individual site, and seismic hazard maps can be created by applying it repeatedly to grid points covering larger areas. It allows the use of earthquake catalogues with incompletely reported historical and complete instrumental parts. When applying themethodology, special attention was given to the effect of hypocentral depth and the variation of attenuation according to azimuth. Hazard maps specifying a 10% chance of exceedance of the given peak ground acceleration value for an exposure time of 50 years were prepared for three different characteristic depths of earthquakes in the Vrancea area. These maps represent a new realistic contribution to the mitigation of the earthquake risk caused by the Vrancea Seismogenic Zone in terms of: (1) input data (consistent, reliable, and the most complete earthquake catalogue), (2) appropriate and specific attenuation relationships (considering both azimuthal and depth effects); and (3) a new and versatile methodology.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号